# Copyright (c) 2012 Google Inc. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
#     * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
#     * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

[MASTER]

# Specify a configuration file.
#rcfile=

# Python code to execute, usually for sys.path manipulation such as
# pygtk.require().
#init-hook=

# Profiled execution.
profile=no

# Add files or directories to the blacklist. They should be base names, not
# paths.
ignore=CVS

# Pickle collected data for later comparisons.
persistent=yes

# List of plugins (as comma separated values of python modules names) to load,
# usually to register additional checkers.
load-plugins=


[MESSAGES CONTROL]

# Enable the message, report, category or checker with the given id(s). You can
# either give multiple identifier separated by comma (,) or put this option
# multiple time.
#enable=

# Disable the message, report, category or checker with the given id(s). You
# can either give multiple identifier separated by comma (,) or put this option
# multiple time (only on the command line, not in the configuration file where
# it should appear only once).
# CHANGED:
# The "design" disable below disables all of the "too-many-*" checks,
# e.g. too-many-arguments, too-many-branches.
disable=
  design,
  missing-docstring,
  locally-disabled,
  locally-enabled,
  star-args,
  wildcard-import,
  fixme,
  global-statement,
  no-self-use,


[REPORTS]

# Set the output format. Available formats are text, parseable, colorized, msvs
# (visual studio) and html.
output-format=text

# Put messages in a separate file for each module / package specified on the
# command line instead of printing them on stdout. Reports (if any) will be
# written in a file name "pylint_global.[txt|html]".
files-output=no

# Tells whether to display a full report or only the messages.
reports=no

# Python expression which should return a note less than 10 (10 is the highest
# note). You have access to the variables errors warning, statement which
# respectively contain the number of errors / warnings messages and the total
# number of statements analyzed. This is used by the global evaluation report
# (RP0004).
evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

# Add a comment according to your evaluation note. This is used by the global
# evaluation report (RP0004).
comment=no


[VARIABLES]

# Tells whether we should check for unused import in __init__ files.
init-import=no

# A regular expression matching the beginning of the name of dummy variables
# (i.e. not used).
dummy-variables-rgx=_|dummy

# List of additional names supposed to be defined in builtins. Remember that
# you should avoid to define new builtins when possible.
additional-builtins=


[TYPECHECK]

# Tells whether missing members accessed in mixin class should be ignored. A
# mixin class is detected if its name ends with "mixin" (case insensitive).
ignore-mixin-members=yes

# List of classes names for which member attributes should not be checked
# (useful for classes with attributes dynamically set).
ignored-classes=SQLObject,twisted.internet.reactor,hashlib,google.appengine.api.memcache

# When zope mode is activated, add a predefined set of Zope acquired attributes
# to generated-members.
zope=no

# List of members which are set dynamically and missed by pylint inference
# system, and so shouldn't trigger E0201 when accessed. Python regular
# expressions are accepted.
generated-members=REQUEST,acl_users,aq_parent


[MISCELLANEOUS]

# List of note tags to take in consideration, separated by a comma.
notes=FIXME,XXX,TODO


[SIMILARITIES]

# Minimum lines number of a similarity.
min-similarity-lines=4

# Ignore comments when computing similarities.
ignore-comments=yes

# Ignore docstrings when computing similarities.
ignore-docstrings=yes


[FORMAT]

# Maximum number of characters on a single line.
max-line-length=132

# Maximum number of lines in a module.
max-module-lines=4000

# String used as indentation unit.
indent-string='    '


[BASIC]

# Required attributes for module, separated by a comma.
required-attributes=

# List of builtins function names that should not be used, separated by a comma.
bad-functions=apply

# Regular expression which should only match correct module names.
module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+)|([a-z-][a-z0-9-]*))$

# Regular expression which should only match correct module level names.
const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$

# Regular expression which should only match correct class names.
class-rgx=[A-Z_][a-zA-Z0-9]+$

# Regular expression which should only match correct function names
function-rgx=[a-z_][a-z0-9_]{2,60}$

# Regular expression which should only match correct method names
method-rgx=[a-z_][a-z0-9_]{2,60}$

# Regular expression which should only match correct instance attribute names.
attr-rgx=[a-z_][a-z0-9_]{1,30}$

# Regular expression which should only match correct argument names.
argument-rgx=[a-z_][a-z0-9_]{1,30}$

# Regular expression which should only match correct variable names.
variable-rgx=[a-z_][a-z0-9_]{1,30}$

# Regular expression which should only match correct list comprehension or
# generator expression variable names.
inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$

# Good variable names which should always be accepted, separated by a comma.
# These short names are acceptable in the following cases:
#  _        - unused value
#  i/j/k    - for XXX in range():
#  k/v      - for k, v in x.items():
#  x/y/z    - coordinates
#  e        - except XXXError as e:
#  f/fd     - with open('blah') as f:
#  _log/Run - webkitpy functions
good-names=_,i,j,k,v,x,y,z,e,f,fd,_log,Run

# Bad variable names which should always be refused, separated by a comma.
bad-names=foo,bar,baz,toto,tutu,tata

# Regular expression which should only match functions or classes name which do
# not require a docstring.
no-docstring-rgx=__.*__


[DESIGN]

# Maximum number of arguments for function / method.
max-args=5

# Argument names that match this expression will be ignored. Default to name
# with leading underscore.
ignored-argument-names=_.*

# Maximum number of locals for function / method body.
max-locals=15

# Maximum number of return / yield for function / method body.
max-returns=6

# Maximum number of branch for function / method body.
max-branchs=12

# Maximum number of statements in function / method body.
max-statements=50

# Maximum number of parents for a class (see R0901).
max-parents=7

# Maximum number of attributes for a class (see R0902).
max-attributes=7

# Minimum number of public methods for a class (see R0903).
min-public-methods=2

# Maximum number of public methods for a class (see R0904).
max-public-methods=20


[CLASSES]

# List of interface methods to ignore, separated by a comma. This is used for
# instance to not check methods defines in Zope's Interface base class.
ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by

# List of method names used to declare (i.e. assign) instance attributes.
defining-attr-methods=__init__,__new__,setUp

# List of valid names for the first argument in a class method.
valid-classmethod-first-arg=cls


[IMPORTS]

# Deprecated modules which should not be used, separated by a comma.
deprecated-modules=regsub,string,TERMIOS,Bastion,rexec

# Create a graph of every (i.e. internal and external) dependencies in the
# given file (report RP0402 must not be disabled).
import-graph=

# Create a graph of external dependencies in the given file (report RP0402 must
# not be disabled).
ext-import-graph=

# Create a graph of internal dependencies in the given file (report RP0402 must
# not be disabled).
int-import-graph=


[EXCEPTIONS]

# Exceptions that will emit a warning when being caught. Defaults to
# "Exception".
overgeneral-exceptions=Exception