| # Copyright 2017 The Cobalt Authors. All Rights Reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| ##################################################################### |
| # If you modify this file, PLEASE REMEMBER TO UPDATE |
| # //cobalt/build/config/base.gni AS WELL |
| ##################################################################### |
| |
| # This contains the defaults and documentation for all Cobalt-defined GYP |
| # variables. Starboard-defined variables are specified in |
| # starboard/build/base_configuration.gypi. |
| # |
| # starboard/build/cobalt_configuration includes this file automatically in all |
| # .gyp files processed by starboard/build/gyp_cobalt. |
| { |
| 'variables': { |
| # Cobalt variables. |
| |
| # We need to define some variables inside of an inner 'variables' scope |
| # so that they can be referenced by other outer variables here. Also, it |
| # allows for the specification of default values that get referenced by |
| # a top level scope. |
| 'variables': { |
| 'cobalt_webapi_extension_source_idl_files%': [], |
| 'cobalt_webapi_extension_generated_header_idl_files%': [], |
| # In cross-compiling for modules like V8, we need a gyp flag to tell |
| # that Cobalt is being compiled by MSVC and certain MSVC options should |
| # be specified. This is needed even with 'msvs_settings' since the later |
| # is not used by platforms that only uses MSVC for host build. |
| 'cobalt_compiled_by_msvc%': 0, |
| 'host_executable_suffix%': '<(EXECUTABLE_SUFFIX)', |
| 'disable_v8_pointer_compression%': 0, |
| }, |
| 'host_executable_suffix%': '<(EXECUTABLE_SUFFIX)', |
| 'disable_v8_pointer_compression%': 0, |
| |
| # Whether Cobalt is being built. |
| 'cobalt': 1, |
| |
| # Contains the current build configuration. |
| 'cobalt_config%': 'gold', |
| 'cobalt_fastbuild%': 0, |
| |
| # Deprecated. Implement the CobaltGraphicsExtensionApi function |
| # IsMapToMeshEnabled instead. |
| # If the CobaltGraphicsExtensionApi is not implemented, then Cobalt will |
| # fall back onto a default. For starboard API versions 12 and later, the |
| # default is true (i.e. Cobalt will assume map to mesh is supported). |
| # For earlier starboard API versions, if this gyp variable is redefined to |
| # a value other than -1, it will use the new value as the default. If it is |
| # not redefined, the default is false. |
| # Enable support for the map to mesh filter, which is primarily used to |
| # implement spherical video playback. |
| 'enable_map_to_mesh%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltUserOnExitStrategy instead. |
| # This variable defines what Cobalt's preferred strategy should be for |
| # handling internally triggered application exit requests (e.g. the user |
| # chooses to back out of the application). |
| # 'stop' -- The application should call SbSystemRequestStop() on exit, |
| # resulting in a complete shutdown of the application. |
| # 'suspend' -- The application should call SbSystemRequestSuspend() on |
| # exit, resulting in the application being "minimized". |
| # 'noexit' -- The application should never allow the user to trigger an |
| # exit, this will be managed by the system. |
| 'cobalt_user_on_exit_strategy%': '', |
| |
| # Contains the current font package selection. This can be used to trade |
| # font quality, coverage, and latency for different font package sizes. |
| # The font package can be one of the following options: |
| # 'standard' -- The default package. It includes all sans-serif, serif, |
| # and FCC fonts, non-CJK fallback fonts in both 'normal' and |
| # 'bold' weights, 'normal' weight CJK ('bold' weight CJK is |
| # synthesized from it), historic script fonts, and color |
| # emojis. This package is ~38.3MB. |
| # 'limited' -- A significantly smaller package than 'standard'. This |
| # package removes all but 'normal' and 'bold' weighted |
| # sans-serif and serif, removes the FCC fonts (which must be |
| # provided by the system or downloaded from the web), |
| # replaces standard CJK with low quality CJK, removes |
| # historic script fonts, and replaces colored emojis with |
| # uncolored ones. Because low quality CJK cannot synthesize |
| # bold, bold glyphs are unavailable in Chinese, Japanese and |
| # Korean. This package is ~8.3MB. |
| # 'minimal' -- The smallest possible font package. It only includes |
| # Roboto's Basic Latin characters. Everything else must be |
| # provided by the system or downloaded from the web. This |
| # package is ~40.0KB. |
| # NOTE: When bold is needed, but unavailable, it is typically synthesized, |
| # resulting in lower quality glyphs than those generated directly from |
| # a bold font. However, this does not occur with low quality CJK, |
| # which is not high enough quality to synthesize. Its glyphs always |
| # have a 'normal' weight. |
| 'cobalt_font_package%': 'standard', |
| |
| # Font package overrides can be used to modify the files included within the |
| # selected package. The following values are available: |
| # -1 -- The package value for the specified category is not overridden. |
| # 0 -- The package value is overridden and no fonts for the specified |
| # category are included. |
| # 1 -- The package value is overridden and fonts from the specified |
| # category with a weight of 'normal' and a style of 'normal' are |
| # included. |
| # 2 -- The package value is overridden and fonts from the specified |
| # category with a weight of either 'normal' or bold' and a style of |
| # 'normal' are included. |
| # 3 -- The package value is overridden and fonts from the specified |
| # category with a weight of either 'normal' or 'bold' and a style of |
| # either 'normal' or 'italic' are included. |
| # 4 -- The package value is overridden and all available fonts from the |
| # specified category are included. This may include additional |
| # weights beyond 'normal' and 'bold'. |
| # See content/fonts/README.md for details on the specific values used by |
| # each of the packages use for the various font categories. |
| 'cobalt_font_package_override_named_sans_serif%': -1, |
| 'cobalt_font_package_override_named_serif%': -1, |
| 'cobalt_font_package_override_named_fcc_fonts%': -1, |
| 'cobalt_font_package_override_fallback_lang_non_cjk%': -1, |
| 'cobalt_font_package_override_fallback_lang_cjk%': -1, |
| 'cobalt_font_package_override_fallback_lang_cjk_low_quality%': -1, |
| 'cobalt_font_package_override_fallback_historic%': -1, |
| 'cobalt_font_package_override_fallback_color_emoji%': -1, |
| 'cobalt_font_package_override_fallback_emoji%': -1, |
| 'cobalt_font_package_override_fallback_symbols%': -1, |
| |
| # Build version number. |
| 'cobalt_version%': '<(BUILD_NUMBER)', |
| |
| 'cobalt_licenses_platform%': 'default', |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltRasterizerType instead. |
| # Defines what kind of rasterizer will be used. This can be adjusted to |
| # force a stub graphics implementation. |
| # It can be one of the following options: |
| # 'direct-gles' -- Uses a light wrapper over OpenGL ES to handle most |
| # draw elements. This will fall back to the skia hardware |
| # rasterizer for some render tree node types, but is |
| # generally faster on the CPU and GPU. This can handle |
| # 360 rendering. |
| # 'hardware' -- As much hardware acceleration of graphics commands as |
| # possible. This uses skia to wrap OpenGL ES commands. |
| # Required for 360 rendering. |
| # 'stub' -- Stub graphics rasterization. A rasterizer object will |
| # still be available and valid, but it will do nothing. |
| 'rasterizer_type%': '', |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltRenderDirtyRegionOnly instead. |
| # If set to 1, will enable support for rendering only the regions of the |
| # display that are modified due to animations, instead of re-rendering the |
| # entire scene each frame. This feature can reduce startup time where |
| # usually there is a small loading spinner animating on the screen. On GLES |
| # renderers, Cobalt will attempt to implement this support by using |
| # eglSurfaceAttrib(..., EGL_SWAP_BEHAVIOR, EGL_BUFFER_PRESERVED), otherwise |
| # the dirty region will be silently disabled. Note that some GLES driver |
| # implementations may internally allocate an extra full screen surface to |
| # support this feature, and many have been noticed to not properly support |
| # this functionality (but they report that they do), and for these reasons |
| # this value is defaulted to 0. |
| 'render_dirty_region_only%': -1, |
| |
| # Override this value to adjust the default rasterizer setting for your |
| # platform. |
| 'default_renderer_options_dependency%': '<(DEPTH)/cobalt/renderer/default_options_starboard.gyp:default_options', |
| |
| # NOTE: Web Extension support is deprecated. Please use Platform Services |
| # (cobalt/doc/platform_services.md) instead. |
| # |
| # Override this to inject a custom interface into Cobalt's JavaScript |
| # `window` global object. This implies that you will have to provide your |
| # own IDL files to describe that interface and all interfaces that it |
| # references. See cobalt/doc/webapi_extension.md for more information. |
| 'cobalt_webapi_extension_source_idl_files%': [ |
| '<@(cobalt_webapi_extension_source_idl_files)', |
| ], |
| # Override this to have Cobalt build IDL files that result in generated |
| # header files that may need to be included from other C++ source files. |
| # This includes, for example, IDL enumerations. See |
| # cobalt/doc/webapi_extension.md for more information. |
| 'cobalt_webapi_extension_generated_header_idl_files%': [ |
| '<@(cobalt_webapi_extension_generated_header_idl_files)', |
| ], |
| |
| # This gyp target must implement the functions defined in |
| # <(DEPTH)/cobalt/browser/idl_extensions.h. See |
| # cobalt/doc/webapi_extension.md for more information. |
| 'cobalt_webapi_extension_gyp_target%': |
| '<(DEPTH)/cobalt/browser/null_webapi_extension.gyp:null_webapi_extension', |
| |
| # Allow throttling of the frame rate. This is expressed in terms of |
| # milliseconds and can be a floating point number. Keep in mind that |
| # swapping frames may take some additional processing time, so it may be |
| # better to specify a lower delay. For example, '33' instead of '33.33' |
| # for 30 Hz refresh. This value is deprecated in favor of the usage of |
| # CobaltExtensionGraphicsApi::GetMinimumFrameIntervalInMilliseconds API. |
| # The default value has been moved into cobalt/renderer/pipeline.cc. |
| 'cobalt_minimum_frame_time_in_milliseconds%': '-1', |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltEglSwapInterval instead. |
| # Cobalt will call eglSwapInterval() and specify this value before calling |
| # eglSwapBuffers() each frame. |
| 'cobalt_egl_swap_interval%': -1, |
| |
| # Set to 1 to build with DIAL support. |
| 'in_app_dial%': 0, |
| |
| # Set to 1 to enable H5vccAccountManager. |
| 'enable_account_manager%': 0, |
| |
| # Set to 1 to enable H5vccCrashLog. |
| 'enable_crash_log%': 1, |
| |
| # Set to 1 to enable H5vccSSO (Single Sign On). |
| 'enable_sso%': 0, |
| |
| # Set to 1 to enable filtering of HTTP headers before sending. |
| 'enable_xhr_header_filtering%': 0, |
| |
| # Set to 1 to enable setting Interceptors on the URLRequestJobFactory |
| 'enable_configure_request_job_factory%': 0, |
| |
| # List of platform-specific targets that get compiled into cobalt. |
| 'cobalt_platform_dependencies%': [], |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltFallbackSplashScreenUrl instead. |
| # The URL of default build time splash screen - see |
| # cobalt/doc/splash_screen.md for information about this. |
| 'fallback_splash_screen_url%': '', |
| # The path to a splash screen to copy into content/data/web which can be |
| # accessed via a file URL starting with |
| # "file:///cobalt/browser/splash_screen/". If '', no file is copied. |
| 'cobalt_splash_screen_file%': '', |
| |
| # Some compiler can not compile with raw assembly(.S files) and v8 |
| # converts asm to inline assembly for these platforms. |
| 'cobalt_v8_emit_builtins_as_inline_asm%': 0, |
| 'cobalt_compiled_by_msvc%': 0, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltEnableQuic instead. |
| 'cobalt_enable_quic%': -1, |
| |
| # Cache parameters |
| # Deprecated. These can now be configured by implementing |
| # the corresponding function in the CobaltExtensionConfigurationApi. |
| |
| # The following set of parameters define how much memory is reserved for |
| # different Cobalt caches. These caches affect CPU *and* GPU memory usage. |
| # |
| # The sum of the following caches effectively describes the maximum GPU |
| # texture memory usage (though it doesn't consider video textures and |
| # display color buffers): |
| # - skia_cache_size_in_bytes (GLES2 rasterizer only) |
| # - image_cache_size_in_bytes |
| # - skia_glyph_atlas_width * skia_glyph_atlas_height |
| # |
| # The other caches affect CPU memory usage. |
| |
| # Determines the capacity of the skia cache. The Skia cache is maintained |
| # within Skia and is used to cache the results of complicated effects such |
| # as shadows, so that Skia draw calls that are used repeatedly across |
| # frames can be cached into surfaces. This setting is only relevant when |
| # using the hardware-accelerated Skia rasterizer. |
| 'skia_cache_size_in_bytes%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltOffscreenTargetCacheSizeInBytes instead. |
| # Determines the amount of GPU memory the offscreen target atlases will |
| # use. This is specific to the direct-GLES rasterizer and caches any render |
| # tree nodes which require skia for rendering. Two atlases will be allocated |
| # from this memory or multiple atlases of the frame size if the limit |
| # allows. It is recommended that enough memory be reserved for two RGBA |
| # atlases about a quarter of the frame size. |
| 'offscreen_target_cache_size_in_bytes%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltEncodedImageCacheSizeInBytes instead. |
| # Determines the capacity of the encoded image cache, which manages encoded |
| # images downloaded from a web page. These images are cached within CPU |
| # memory. This not only reduces network traffic to download the encoded |
| # images, but also allows the downloaded images to be held during suspend. |
| # Note that there is also a cache for the decoded images whose capacity is |
| # specified in |image_cache_size_in_bytes|. The decoded images are often |
| # cached in the GPU memory and will be released during suspend. |
| # |
| # If a system meet the following requirements: |
| # 1. Has a fast image decoder. |
| # 2. Has enough CPU memory, or has a unified memory architecture that allows |
| # sharing of CPU and GPU memory. |
| # Then it may consider to set |encoded_image_cache_size_in_bytes| to a much |
| # bigger value, and set the value of |image_cache_size_in_bytes| to a much |
| # smaller value. This allows the app to cache significant more images. |
| # |
| # Set this to 0 can disable the cache completely. |
| 'encoded_image_cache_size_in_bytes%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltImageCacheSizeInBytes instead. |
| # Determines the capacity of the image cache, which manages image surfaces |
| # downloaded from a web page. While it depends on the platform, often (and |
| # ideally) these images are cached within GPU memory. |
| # Set to -1 to automatically calculate the value at runtime, based on |
| # features like windows dimensions and the value of |
| # SbSystemGetTotalGPUMemory(). |
| 'image_cache_size_in_bytes%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltLocalTypeFaceCacheSizeInBytes instead. |
| # Determines the capacity of the local font cache, which manages all fonts |
| # loaded from local files. Newly encountered sections of font files are |
| # lazily loaded into the cache, enabling subsequent requests to the same |
| # file sections to be handled via direct memory access. Once the limit is |
| # reached, further requests are handled via file stream. |
| # Setting the value to 0 disables memory caching and causes all font file |
| # accesses to be done using file streams. |
| 'local_font_cache_size_in_bytes%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltRemoteTypefaceCacheSizeInBytes instead. |
| # Determines the capacity of the remote font cache, which manages all |
| # fonts downloaded from a web page. |
| 'remote_font_cache_size_in_bytes%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltMeshCacheSizeInBytes instead. |
| # Determines the capacity of the mesh cache. Each mesh is held compressed |
| # in main memory, to be inflated into a GPU buffer when needed for |
| # projection. When set to 'auto', will be adjusted according to whether |
| # the enable_map_to_mesh is true or not. If enable_map_to_mesh is false, |
| # then the mesh cache size will be set to 0. |
| 'mesh_cache_size_in_bytes%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltImageCacheCapactityMultiplierWhenPlayingVideo. |
| # Modifying this value to be non-1.0f will result in the image cache |
| # capacity being cleared and then temporarily reduced for the duration that |
| # a video is playing. This can be useful for some platforms if they are |
| # particularly constrained for (GPU) memory during video playback. When |
| # playing a video, the image cache is reduced to: |
| # image_cache_size_in_bytes * |
| # image_cache_capacity_multiplier_when_playing_video. |
| 'image_cache_capacity_multiplier_when_playing_video%': '', |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi functions |
| # CobaltSkiaGlyphAtlasWidth and CobaltSkiaGlyphAtlasHeight, respectively. |
| # Determines the size in pixels of the glyph atlas where rendered glyphs are |
| # cached. The resulting memory usage is 2 bytes of GPU memory per pixel. |
| # When a value is used that is too small, thrashing may occur that will |
| # result in visible stutter. Such thrashing is more likely to occur when CJK |
| # language glyphs are rendered and when the size of the glyphs in pixels is |
| # larger, such as for higher resolution displays. |
| # The negative default values indicates to the engine that these settings |
| # should be automatically set. |
| 'skia_glyph_atlas_width%': '-1', |
| 'skia_glyph_atlas_height%': '-1', |
| |
| # Max Cobalt CPU usage specifies that the cobalt program should |
| # keep it's size below the specified size. |
| # This setting is deprecated. Implement starboard API function |
| # SbSystemGetTotalCPUMemory() instead. |
| 'max_cobalt_cpu_usage%': -1, |
| |
| # Max Cobalt GPU usage specifies that the cobalt program should |
| # keep it's size below the specified size. |
| # This setting is deprecated. Implement starboard API function |
| # SbSystemGetTotalGPUMemory() instead. |
| 'max_cobalt_gpu_usage%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltReduceCpuMemoryBy instead. |
| # When specified this value will reduce the cpu memory consumption by |
| # the specified amount. -1 disables the value. |
| # When this value is specified then max_cobalt_cpu_usage will not be |
| # used in memory_constrainer, but will still be used for triggering |
| # a warning if the engine consumes more memory than this value specifies. |
| 'reduce_cpu_memory_by%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltReduceGpuMemoryBy instead. |
| # When specified this value will reduce the gpu memory consumption by |
| # the specified amount. -1 disables the value. |
| # When this value is specified then max_cobalt_gpu_usage will not be |
| # used in memory_constrainer, but will still be used for triggering |
| # a warning if the engine consumes more memory than this value specifies. |
| 'reduce_gpu_memory_by%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltEnableJit instead. |
| 'cobalt_enable_jit%': -1, |
| |
| # Deprecated. Implement the CobaltExtensionConfigurationApi function |
| # CobaltGcZeal instead. |
| # Can be set to enable zealous garbage collection, if |javascript_engine| |
| # supports it. Zealous garbage collection will cause garbage collection |
| # to occur much more frequently than normal, for the purpose of finding or |
| # reproducing bugs. |
| 'cobalt_gc_zeal%': -1, |
| |
| # The cobalt_media_* variables defined below are deprecated. Their |
| # corresponding Starboard functions should be defined instead of setting |
| # their values through GYP. |
| |
| # This can be set to "memory" or "file". When it is set to "memory", the |
| # media buffers will be stored in main memory allocated by SbMemory |
| # functions. When it is set to "file", the media buffers will be stored in |
| # a temporary file in the system cache folder acquired by calling |
| # SbSystemGetPath() with "kSbSystemPathCacheDirectory". Note that when its |
| # value is "file" the media stack will still allocate memory to cache the |
| # the buffers in use. |
| 'cobalt_media_buffer_storage_type%': '', |
| # When either |cobalt_media_buffer_initial_capacity| or |
| # |cobalt_media_buffer_allocation_unit| isn't zero, media buffers will be |
| # allocated using a memory pool. Set the following variable to 1 to |
| # allocate the media buffer pool memory on demand and return all memory to |
| # the system when there is no media buffer allocated. Setting the following |
| # value to 0 results in that Cobalt will allocate |
| # |cobalt_media_buffer_initial_capacity| bytes for media buffer on startup |
| # and will not release any media buffer memory back to the system even if |
| # there is no media buffers allocated. |
| 'cobalt_media_buffer_pool_allocate_on_demand%': -1, |
| # The amount of memory that will be used to store media buffers allocated |
| # during system startup. To allocate a large chunk at startup helps with |
| # reducing fragmentation and can avoid failures to allocate incrementally. |
| # This can be set to 0. |
| 'cobalt_media_buffer_initial_capacity%': -1, |
| # The maximum amount of memory that will be used to store media buffers when |
| # video resolution is no larger than 1080p. This must be larger than sum of |
| # 1080p video budget and non-video budget. |
| 'cobalt_media_buffer_max_capacity_1080p%': -1, |
| # The maximum amount of memory that will be used to store media buffers when |
| # video resolution is 4k. If 0, then memory can grow without bound. This |
| # must be larger than sum of 4k video budget and non-video budget. |
| 'cobalt_media_buffer_max_capacity_4k%': -1, |
| |
| # When the media stack needs more memory to store media buffers, it will |
| # allocate extra memory in units of |cobalt_media_buffer_allocation_unit|. |
| # This can be set to 0, in which case the media stack will allocate extra |
| # memory on demand. When |cobalt_media_buffer_initial_capacity| and this |
| # value are both set to 0, the media stack will allocate individual buffers |
| # directly using SbMemory functions. |
| 'cobalt_media_buffer_allocation_unit%': -1, |
| |
| # The media buffer will be allocated using the following alignment. Set |
| # this to a larger value may increase the memory consumption of media |
| # buffers. |
| 'cobalt_media_buffer_alignment%': -1, |
| # Extra bytes allocated at the end of a media buffer to ensure that the |
| # buffer can be use optimally by specific instructions like SIMD. Set to 0 |
| # to remove any padding. |
| 'cobalt_media_buffer_padding%': -1, |
| |
| # The memory used when playing mp4 videos that is not in DASH format. The |
| # resolution of such videos shouldn't go beyond 1080p. Its value should be |
| # less than the sum of 'cobalt_media_buffer_non_video_budget' and |
| # 'cobalt_media_buffer_video_budget_1080p' but not less than 8 MB. |
| 'cobalt_media_buffer_progressive_budget%': -1, |
| |
| # Specifies the maximum amount of memory used by audio or text buffers of |
| # media source before triggering a garbage collection. A large value will |
| # cause more memory being used by audio buffers but will also make |
| # JavaScript app less likely to re-download audio data. Note that the |
| # JavaScript app may experience significant difficulty if this value is too |
| # low. |
| 'cobalt_media_buffer_non_video_budget%': -1, |
| |
| # Specifies the maximum amount of memory used by video buffers of media |
| # source before triggering a garbage collection when the video resolution is |
| # lower than 1080p (1920x1080). A large value will cause more memory being |
| # used by video buffers but will also make JavaScript app less likely to |
| # re-download video data. Note that the JavaScript app may experience |
| # significant difficulty if this value is too low. |
| 'cobalt_media_buffer_video_budget_1080p%': -1, |
| # Specifies the maximum amount of memory used by video buffers of media |
| # source before triggering a garbage collection when the video resolution is |
| # lower than 4k (3840x2160). A large value will cause more memory being |
| # used by video buffers but will also make JavaScript app less likely to |
| # re-download video data. Note that the JavaScript app may experience |
| # significant difficulty if this value is too low. |
| 'cobalt_media_buffer_video_budget_4k%': -1, |
| |
| # Specifies the duration threshold of media source garbage collection. When |
| # the accumulated duration in a source buffer exceeds this value, the media |
| # source implementation will try to eject existing buffers from the cache. |
| # This is usually triggered when the video being played has a simple content |
| # and the encoded data is small. In such case this can limit how much is |
| # allocated for the book keeping data of the media buffers and avoid OOM of |
| # system heap. |
| # This should be set to 170 for most of the platforms. But it can be |
| # further reduced on systems with extremely low memory. |
| 'cobalt_media_source_garbage_collection_duration_threshold_in_seconds%': -1, |
| |
| # TODO(b/212641065): Evaluate if any flags in defines_debug, defines_devel |
| # defines_qa need to be added to GN. |
| 'defines_debug': [ |
| 'ALLOCATOR_STATS_TRACKING', |
| 'COBALT_BOX_DUMP_ENABLED', |
| 'COBALT_BUILD_TYPE_DEBUG', |
| 'COBALT_ENABLE_JAVASCRIPT_ERROR_LOGGING', |
| 'COBALT_ENABLE_VERSION_COMPATIBILITY_VALIDATIONS', |
| 'COBALT_SECURITY_SCREEN_CLEAR_TO_UGLY_COLOR', |
| 'ENABLE_DEBUG_COMMAND_LINE_SWITCHES', |
| 'ENABLE_DEBUG_C_VAL', |
| 'ENABLE_IGNORE_CERTIFICATE_ERRORS', |
| 'ENABLE_PARTIAL_LAYOUT_CONTROL', |
| 'ENABLE_TEST_DATA', |
| 'ENABLE_TEST_RUNNER', |
| 'ENABLE_TOKEN_ALPHABETICAL_SORTING', |
| |
| # TODO: Rename to COBALT_LOGGING_ENABLED. |
| '__LB_SHELL__FORCE_LOGGING__', |
| |
| 'SK_DEVELOPER', |
| ], |
| 'defines_devel': [ |
| 'ALLOCATOR_STATS_TRACKING', |
| 'COBALT_BUILD_TYPE_DEVEL', |
| 'COBALT_ENABLE_JAVASCRIPT_ERROR_LOGGING', |
| 'COBALT_ENABLE_VERSION_COMPATIBILITY_VALIDATIONS', |
| 'COBALT_SECURITY_SCREEN_CLEAR_TO_UGLY_COLOR', |
| 'ENABLE_DEBUG_COMMAND_LINE_SWITCHES', |
| 'ENABLE_DEBUG_C_VAL', |
| 'ENABLE_IGNORE_CERTIFICATE_ERRORS', |
| 'ENABLE_PARTIAL_LAYOUT_CONTROL', |
| 'ENABLE_TEST_DATA', |
| 'ENABLE_TEST_RUNNER', |
| 'ENABLE_TOKEN_ALPHABETICAL_SORTING', |
| '__LB_SHELL__FORCE_LOGGING__', |
| 'SK_DEVELOPER', |
| ], |
| 'defines_qa': [ |
| 'ALLOCATOR_STATS_TRACKING', |
| 'COBALT_BUILD_TYPE_QA', |
| 'COBALT_ENABLE_JAVASCRIPT_ERROR_LOGGING', |
| 'COBALT_SECURITY_SCREEN_CLEAR_TO_UGLY_COLOR', |
| 'ENABLE_DEBUG_COMMAND_LINE_SWITCHES', |
| 'ENABLE_DEBUG_C_VAL', |
| 'ENABLE_IGNORE_CERTIFICATE_ERRORS', |
| 'ENABLE_PARTIAL_LAYOUT_CONTROL', |
| 'ENABLE_TEST_DATA', |
| 'ENABLE_TEST_RUNNER', |
| ], |
| 'defines_gold': [ |
| 'ALLOCATOR_STATS_TRACKING', |
| 'COBALT_BUILD_TYPE_GOLD', |
| 'COBALT_FORCE_CSP', |
| 'COBALT_FORCE_HTTPS', |
| 'OFFICIAL_BUILD', # Chromium base relies on this. |
| 'TRACING_DISABLED', |
| ], |
| }, |
| |
| 'target_defaults': { |
| 'defines': [ |
| 'COBALT', |
| ], |
| 'conditions': [ |
| ['cobalt_media_buffer_pool_allocate_on_demand != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_POOL_ALLOCATE_ON_DEMAND=<(cobalt_media_buffer_pool_allocate_on_demand)', |
| ], |
| }], |
| ['cobalt_media_buffer_initial_capacity != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_INITIAL_CAPACITY=<(cobalt_media_buffer_initial_capacity)', |
| ], |
| }], |
| ['cobalt_media_buffer_max_capacity_1080p != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_MAX_CAPACITY_1080P=<(cobalt_media_buffer_max_capacity_1080p)', |
| ], |
| }], |
| ['cobalt_media_buffer_max_capacity_4k != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_MAX_CAPACITY_4K=<(cobalt_media_buffer_max_capacity_4k)', |
| ], |
| }], |
| ['cobalt_media_buffer_max_capacity_4k != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_MAX_CAPACITY_4K=<(cobalt_media_buffer_max_capacity_4k)', |
| ], |
| }], |
| ['cobalt_media_buffer_max_capacity_4k != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_MAX_CAPACITY_4K=<(cobalt_media_buffer_max_capacity_4k)', |
| ], |
| }], |
| ['cobalt_media_buffer_allocation_unit != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_ALLOCATION_UNIT=<(cobalt_media_buffer_allocation_unit)', |
| ], |
| }], |
| ['cobalt_media_buffer_alignment != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_ALIGNMENT=<(cobalt_media_buffer_alignment)', |
| ], |
| }], |
| ['cobalt_media_buffer_padding != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_PADDING=<(cobalt_media_buffer_padding)', |
| ], |
| }], |
| ['cobalt_media_buffer_progressive_budget != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_PROGRESSIVE_BUDGET=<(cobalt_media_buffer_progressive_budget)', |
| ], |
| }], |
| ['cobalt_media_buffer_non_video_budget != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_NON_VIDEO_BUDGET=<(cobalt_media_buffer_non_video_budget)', |
| ], |
| }], |
| ['cobalt_media_buffer_video_budget_1080p != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_VIDEO_BUDGET_1080P=<(cobalt_media_buffer_video_budget_1080p)', |
| ], |
| }], |
| ['cobalt_media_buffer_video_budget_4k != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_VIDEO_BUDGET_4K=<(cobalt_media_buffer_video_budget_4k)', |
| ], |
| }], |
| ['cobalt_media_source_garbage_collection_duration_threshold_in_seconds != -1', { |
| 'defines': [ |
| 'COBALT_MEDIA_SOURCE_GARBAGE_COLLECTION_DURATION_THRESHOLD_IN_SECONDS=<(cobalt_media_source_garbage_collection_duration_threshold_in_seconds)', |
| ], |
| }], |
| ['cobalt_media_buffer_storage_type == "memory"', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_STORAGE_TYPE_MEMORY=1', |
| ], |
| }, { |
| 'conditions': [ |
| ['cobalt_media_buffer_storage_type != ""', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_STORAGE_TYPE_FILE=1', |
| ], |
| }], |
| ], |
| }], |
| ['in_app_dial == 1', { |
| 'defines': [ |
| 'DIAL_SERVER', |
| ], |
| }], |
| ['enable_debugger == 1', { |
| 'defines': [ |
| 'ENABLE_DEBUGGER', |
| ], |
| }], |
| ['host_os=="win"', { |
| # A few flags to mute MSVC compiler errors that does not appear on Linux. |
| 'compiler_flags_host': [ |
| '/wd4267', # Possible loss of precision from size_t to a smaller type. |
| '/wd4715', # Not all control paths return value. |
| ], |
| }], |
| ], |
| }, # end of target_defaults |
| |
| # For configurations other than Gold, set the flag that lets test data files |
| # be copied and carried along with the build. |
| # Clients must copy over all content; to avoid having to copy over extra data, we |
| # omit the test data |
| 'conditions': [ |
| ['cobalt_config != "gold"', { |
| 'variables' : { |
| 'enable_about_scheme': 1, |
| 'enable_fake_microphone': 1, |
| 'enable_network_logging': 1, |
| 'enable_webdriver%': 1, |
| }, |
| }, |
| { |
| 'variables' : { |
| 'enable_about_scheme': 0, |
| 'enable_fake_microphone': 0, |
| 'enable_network_logging': 0, |
| 'enable_webdriver': 0, |
| }, |
| }], |
| ['cobalt_config != "gold"', { |
| 'variables' : { |
| 'cobalt_copy_test_data': 1, |
| }, |
| }, |
| { |
| 'variables' : { |
| 'cobalt_copy_test_data': 0, |
| }, |
| }], |
| ], |
| } |