| #!/usr/bin/python |
| # |
| # Copyright 2017 The Cobalt Authors. All Rights Reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| """Cross-platform unit test runner.""" |
| |
| import argparse |
| import logging |
| import os |
| import re |
| import signal |
| import subprocess |
| import sys |
| import threading |
| import traceback |
| |
| import _env # pylint: disable=unused-import, relative-import |
| import cStringIO |
| from starboard.tools import abstract_launcher |
| from starboard.tools import build |
| from starboard.tools import command_line |
| from starboard.tools import paths |
| from starboard.tools.testing import build_tests |
| from starboard.tools.testing import test_filter |
| from starboard.tools.util import SetupDefaultLoggingConfig |
| |
| _FLAKY_RETRY_LIMIT = 4 |
| _TOTAL_TESTS_REGEX = re.compile(r"^\[==========\] (.*) tests? from .*" |
| r"test cases? ran. \(.* ms total\)") |
| _TESTS_PASSED_REGEX = re.compile(r"^\[ PASSED \] (.*) tests?") |
| _TESTS_FAILED_REGEX = re.compile(r"^\[ FAILED \] (.*) tests?, listed below:") |
| _SINGLE_TEST_FAILED_REGEX = re.compile(r"^\[ FAILED \] (.*)") |
| |
| _CRASHPAD_TARGET = "crashpad_handler" |
| _LOADER_TARGET = "elf_loader_sandbox" |
| |
| |
| def _EnsureBuildDirectoryExists(path): |
| if not os.path.exists(path): |
| raise ValueError("'{}' does not exist.".format(path)) |
| |
| |
| def _FilterTests(target_list, filters, config_name): |
| """Returns a Mapping of test targets -> filtered tests.""" |
| targets = {} |
| for target in target_list: |
| targets[target] = [] |
| |
| for platform_filter in filters: |
| if platform_filter == test_filter.DISABLE_TESTING: |
| return {} |
| |
| # Only filter the tests specifying our config or all configs. |
| if platform_filter.config and platform_filter.config != config_name: |
| continue |
| |
| target_name = platform_filter.target_name |
| if platform_filter.test_name == test_filter.FILTER_ALL: |
| if target_name in targets: |
| # Filter the whole test binary |
| del targets[target_name] |
| else: |
| if target_name not in targets: |
| continue |
| targets[target_name].append(platform_filter.test_name) |
| |
| return targets |
| |
| |
| def _VerifyConfig(config): |
| """Ensures a platform or app config is self-consistent.""" |
| targets = config.GetTestTargets() |
| filters = config.GetTestFilters() |
| filter_targets = [ |
| f.target_name for f in filters if f != test_filter.DISABLE_TESTING |
| ] |
| |
| # Filters must be defined in the same config as the targets they're filtering, |
| # platform filters in platform config, and app filters in app config. |
| unknown_targets = set(filter_targets) - set(targets) |
| if unknown_targets: |
| raise ValueError("Unknown filter targets in {} config ({}): {}".format( |
| config.GetName(), config.__class__.__name__, sorted(unknown_targets))) |
| |
| |
| class TestLineReader(object): |
| """Reads lines from the test runner's launcher output via an OS pipe. |
| |
| This is used to keep the output in memory instead of having to |
| to write it to tempfiles, as well as to write the output to stdout |
| in real time instead of dumping the test results all at once later. |
| """ |
| |
| def __init__(self, read_pipe): |
| self.read_pipe = read_pipe |
| self.output_lines = cStringIO.StringIO() |
| self.stop_event = threading.Event() |
| self.reader_thread = threading.Thread(target=self._ReadLines) |
| |
| # Don't allow this thread to block sys.exit() when ctrl+c is pressed. |
| # Otherwise it will hang forever waiting for the pipe to close. |
| self.reader_thread.daemon = True |
| |
| def _ReadLines(self): |
| """Continuously reads and stores lines of test output.""" |
| while not self.stop_event.is_set(): |
| line = self.read_pipe.readline() |
| if line: |
| # Normalize line endings to unix. |
| line = line.replace("\r", "") |
| try: |
| sys.stdout.write(line) |
| sys.stdout.flush() |
| except IOError as err: |
| self.output_lines.write("error: " + str(err) + "\n") |
| return |
| else: |
| break |
| self.output_lines.write(line) |
| |
| def Start(self): |
| self.reader_thread.start() |
| |
| def Kill(self): |
| """Kills the thread reading lines from the launcher's output. |
| |
| This is only used on a manual exit to ensure that the thread exits cleanly; |
| in the normal case, the thread will exit on its own when no more lines of |
| output are available. |
| """ |
| self.stop_event.set() |
| |
| def Join(self): |
| """Ensures that all test output from the test launcher has been read.""" |
| self.reader_thread.join() |
| |
| def GetLines(self): |
| """Returns stored output as a list of lines.""" |
| return self.output_lines.getvalue().split("\n") |
| |
| |
| class TestLauncher(object): |
| """Manages the thread that the test object runs in. |
| |
| A separate thread is used to make it easier for the runner and reader to |
| communicate, and for the main thread to shut them down. |
| """ |
| |
| def __init__(self, launcher): |
| self.launcher = launcher |
| self.runner_thread = threading.Thread(target=self._Run) |
| |
| self.return_code_lock = threading.Lock() |
| self.return_code = 1 |
| |
| def Start(self): |
| self.runner_thread.start() |
| |
| def Kill(self): |
| """Kills the running launcher.""" |
| try: |
| self.launcher.Kill() |
| except Exception: # pylint: disable=broad-except |
| sys.stderr.write("Error while killing {}:\n".format( |
| self.launcher.target_name)) |
| traceback.print_exc(file=sys.stderr) |
| |
| def Join(self): |
| self.runner_thread.join() |
| |
| def _Run(self): |
| """Runs the launcher, and assigns a return code.""" |
| return_code = 1 |
| try: |
| return_code = self.launcher.Run() |
| except Exception: # pylint: disable=broad-except |
| sys.stderr.write("Error while running {}:\n".format( |
| self.launcher.target_name)) |
| traceback.print_exc(file=sys.stderr) |
| |
| self.return_code_lock.acquire() |
| self.return_code = return_code |
| self.return_code_lock.release() |
| |
| def GetReturnCode(self): |
| self.return_code_lock.acquire() |
| return_code = self.return_code |
| self.return_code_lock.release() |
| return return_code |
| |
| |
| class TestRunner(object): |
| """Runs unit tests.""" |
| |
| def __init__(self, |
| platform, |
| config, |
| loader_platform, |
| loader_config, |
| device_id, |
| specified_targets, |
| target_params, |
| out_directory, |
| loader_out_directory, |
| platform_tests_only, |
| application_name=None, |
| dry_run=False, |
| xml_output_dir=None, |
| log_xml_results=False, |
| launcher_args=None): |
| self.platform = platform |
| self.config = config |
| self.loader_platform = loader_platform |
| self.loader_config = loader_config |
| self.device_id = device_id |
| self.target_params = target_params |
| self.out_directory = out_directory |
| self.loader_out_directory = loader_out_directory |
| self.launcher_args = launcher_args |
| if not self.out_directory: |
| self.out_directory = paths.BuildOutputDirectory(self.platform, |
| self.config) |
| self.coverage_directory = os.path.join(self.out_directory, "coverage") |
| if not self.loader_out_directory and self.loader_platform and self.loader_config: |
| self.loader_out_directory = paths.BuildOutputDirectory( |
| self.loader_platform, self.loader_config) |
| |
| self._platform_config = build.GetPlatformConfig(platform) |
| if self.loader_platform: |
| self._loader_platform_config = build.GetPlatformConfig(loader_platform) |
| self._app_config = self._platform_config.GetApplicationConfiguration( |
| application_name) |
| self.application_name = application_name |
| self.dry_run = dry_run |
| self.xml_output_dir = xml_output_dir |
| self.log_xml_results = log_xml_results |
| self.threads = [] |
| |
| _EnsureBuildDirectoryExists(self.out_directory) |
| _VerifyConfig(self._platform_config) |
| |
| if self.loader_platform: |
| _EnsureBuildDirectoryExists(self.loader_out_directory) |
| _VerifyConfig(self._loader_platform_config) |
| |
| _VerifyConfig(self._app_config) |
| |
| # If a particular test binary has been provided, configure only that one. |
| if specified_targets: |
| self.test_targets = self._GetSpecifiedTestTargets(specified_targets) |
| else: |
| self.test_targets = self._GetTestTargets(platform_tests_only) |
| |
| self.test_env_vars = self._GetAllTestEnvVariables() |
| |
| def _Exec(self, cmd_list, output_file=None): |
| """Execute a command in a subprocess.""" |
| try: |
| msg = "Executing:\n " + " ".join(cmd_list) |
| logging.info(msg) |
| if output_file: |
| with open(output_file, "wb") as out: |
| p = subprocess.Popen( |
| cmd_list, |
| stdout=out, |
| universal_newlines=True, |
| cwd=self.out_directory) |
| else: |
| p = subprocess.Popen( |
| cmd_list, |
| stderr=subprocess.STDOUT, |
| universal_newlines=True, |
| cwd=self.out_directory) |
| p.wait() |
| return p.returncode |
| except KeyboardInterrupt: |
| p.kill() |
| return 1 |
| |
| def _GetSpecifiedTestTargets(self, specified_targets): |
| """Sets up specified test targets for a given platform and configuration. |
| |
| Args: |
| specified_targets: Array of test names to run. |
| |
| Returns: |
| A mapping from the test binary names to a list of filters for that binary. |
| If the test has no filters, its list is empty. |
| |
| Raises: |
| RuntimeError: The specified test binary has been disabled for the given |
| platform and configuration. |
| """ |
| targets = _FilterTests(specified_targets, self._GetTestFilters(), |
| self.config) |
| if len(targets) != len(specified_targets): |
| # If any of the provided target names have been filtered, |
| # they will not all run. |
| sys.stderr.write("Test list has been filtered. Not all will run.\n" |
| "Original list: \"{}\".\n" |
| "Filtered list: \"{}\".\n".format( |
| specified_targets, list(targets.keys()))) |
| |
| return targets |
| |
| def _GetTestTargets(self, platform_tests_only): |
| """Collects all test targets for a given platform and configuration. |
| |
| Args: |
| platform_tests_only: If True then only the platform tests are fetched. |
| |
| Returns: |
| A mapping from names of test binaries to lists of filters for |
| each test binary. If a test binary has no filters, its list is |
| empty. |
| """ |
| targets = self._platform_config.GetTestTargets() |
| if not platform_tests_only: |
| targets.extend(self._app_config.GetTestTargets()) |
| targets = list(set(targets)) |
| |
| final_targets = _FilterTests(targets, self._GetTestFilters(), self.config) |
| if not final_targets: |
| sys.stderr.write("All tests were filtered; no tests will be run.\n") |
| |
| return final_targets |
| |
| def _GetTestFilters(self): |
| """Get test filters for a given platform and configuration.""" |
| filters = self._platform_config.GetTestFilters() |
| app_filters = self._app_config.GetTestFilters() |
| if app_filters: |
| filters.extend(app_filters) |
| # Regardless of our own platform, if we are Evergreen we also need to |
| # filter the tests that are filtered by the underlying platform. For |
| # example, the 'evergreen-arm-hardfp' needs to filter the 'raspi-2' |
| # filtered tests when it is running on a Raspberry Pi 2. |
| if self.loader_platform and self.loader_config: |
| loader_platform_config = build.GetPlatformConfig(self.loader_platform) |
| loader_app_config = loader_platform_config.GetApplicationConfiguration( |
| self.application_name) |
| for filter_ in (loader_platform_config.GetTestFilters() + |
| loader_app_config.GetTestFilters()): |
| if filter_ not in filters: |
| filters.append(filter_) |
| return filters |
| |
| def _GetAllTestEnvVariables(self): |
| """Gets all environment variables used for tests on the given platform.""" |
| env_variables = {} |
| for test, test_env in self._app_config.GetTestEnvVariables().iteritems(): |
| if test in env_variables: |
| env_variables[test].update(test_env) |
| else: |
| env_variables[test] = test_env |
| return env_variables |
| |
| def _RunTest(self, target_name, test_name=None): |
| """Runs a specific target or test and collects the output. |
| |
| Args: |
| target_name: The name of the test suite to be run. |
| test_name: The name of the specific test to be run. The entire test suite |
| is run when this is empty. |
| |
| Returns: |
| A tuple containing tests results (See "_CollectTestResults()"). |
| """ |
| |
| # Get the environment variables for the test target |
| env = {} |
| env.update(self._platform_config.GetTestEnvVariables()) |
| env.update(self.test_env_vars.get(target_name, {})) |
| |
| # Set up a pipe for processing test output |
| read_fd, write_fd = os.pipe() |
| read_pipe = os.fdopen(read_fd, "r") |
| write_pipe = os.fdopen(write_fd, "w") |
| |
| # Filter the specified tests for this platform, if any |
| test_params = [] |
| gtest_filter_value = "" |
| |
| # If a specific test case was given, filter for the exact name given. |
| if test_name: |
| gtest_filter_value = test_name |
| elif self.test_targets[target_name]: |
| gtest_filter_value = "-" + ":".join(self.test_targets[target_name]) |
| if gtest_filter_value: |
| test_params.append("--gtest_filter=" + gtest_filter_value) |
| |
| if self.log_xml_results: |
| # Log the xml results |
| test_params.append("--gtest_output=xml:log") |
| logging.info("Xml results for this test will be logged.") |
| elif self.xml_output_dir: |
| # Have gtest create and save a test result xml |
| xml_output_subdir = os.path.join(self.xml_output_dir, target_name) |
| try: |
| os.makedirs(xml_output_subdir) |
| except OSError: |
| pass |
| xml_output_path = os.path.join(xml_output_subdir, "sponge_log.xml") |
| logging.info("Xml output for this test will be saved to: %s", |
| xml_output_path) |
| test_params.append("--gtest_output=xml:%s" % (xml_output_path)) |
| |
| test_params.extend(self.target_params) |
| if self.dry_run: |
| test_params.extend(["--gtest_list_tests"]) |
| |
| launcher = abstract_launcher.LauncherFactory( |
| self.platform, |
| target_name, |
| self.config, |
| device_id=self.device_id, |
| target_params=test_params, |
| output_file=write_pipe, |
| out_directory=self.out_directory, |
| coverage_directory=self.coverage_directory, |
| env_variables=env, |
| loader_platform=self.loader_platform, |
| loader_config=self.loader_config, |
| loader_out_directory=self.loader_out_directory, |
| launcher_args=self.launcher_args) |
| |
| test_reader = TestLineReader(read_pipe) |
| test_launcher = TestLauncher(launcher) |
| |
| self.threads.append(test_launcher) |
| self.threads.append(test_reader) |
| |
| dump_params = " ARGS:" + " ".join(test_params) if test_params else "" |
| dump_env = " ENV VARS: " + ";".join( |
| "{}={}".format(k, v) for k, v in env.items()) if env else "" |
| # Output either the name of the test target or the specific test case |
| # being run. |
| # pylint: disable=g-long-ternary |
| sys.stdout.write("Starting {}{}{}".format( |
| test_name if test_name else target_name, dump_params, dump_env)) |
| |
| # Output a newline before running the test target / case. |
| sys.stdout.write("\n") |
| |
| if test_params: |
| sys.stdout.write(" {}\n".format(test_params)) |
| test_reader.Start() |
| test_launcher.Start() |
| |
| # Wait for the launcher to exit then close the write pipe, which will |
| # cause the reader to exit. |
| test_launcher.Join() |
| write_pipe.close() |
| |
| # Only after closing the write pipe, wait for the reader to exit. |
| test_reader.Join() |
| read_pipe.close() |
| |
| output = test_reader.GetLines() |
| |
| self.threads = [] |
| return self._CollectTestResults(output, target_name, |
| test_launcher.GetReturnCode()) |
| |
| def _CollectTestResults(self, results, target_name, return_code): |
| """Collects passing and failing tests for one test binary. |
| |
| Args: |
| results: A list containing each line of test results. |
| target_name: The name of the test target being run. |
| return_code: The return code of the test binary, |
| |
| Returns: |
| A tuple of length 6, of the format (target_name, number_of_total_tests, |
| number_of_passed_tests, number_of_failed_tests, list_of_failed_tests, |
| return_code). |
| """ |
| |
| total_count = 0 |
| passed_count = 0 |
| failed_count = 0 |
| failed_tests = [] |
| |
| for idx, line in enumerate(results): |
| total_tests_match = _TOTAL_TESTS_REGEX.search(line) |
| if total_tests_match: |
| total_count = int(total_tests_match.group(1)) |
| |
| passed_match = _TESTS_PASSED_REGEX.search(line) |
| if passed_match: |
| passed_count = int(passed_match.group(1)) |
| |
| failed_match = _TESTS_FAILED_REGEX.search(line) |
| if failed_match: |
| failed_count = int(failed_match.group(1)) |
| # Descriptions of all failed tests appear after this line |
| failed_tests = self._CollectFailedTests(results[idx + 1:]) |
| |
| return (target_name, total_count, passed_count, failed_count, failed_tests, |
| return_code) |
| |
| def _CollectFailedTests(self, lines): |
| """Collects the names of all failed tests. |
| |
| Args: |
| lines: The lines of log output where failed test names are located. |
| |
| Returns: |
| A list of failed test names. |
| """ |
| failed_tests = [] |
| for line in lines: |
| test_failed_match = _SINGLE_TEST_FAILED_REGEX.search(line) |
| if test_failed_match: |
| failed_tests.append(test_failed_match.group(1)) |
| return failed_tests |
| |
| def _GetFilteredTestList(self, target_name): |
| return _FilterTests([target_name], self._GetTestFilters(), |
| self.config).get(target_name, []) |
| |
| def _ProcessAllTestResults(self, results): |
| """Collects and returns output for all selected tests. |
| |
| Args: |
| results: List containing tuples corresponding to test results |
| |
| Returns: |
| True if the test run succeeded, False if not. |
| """ |
| if self.dry_run: |
| logging.info("") # formatting newline. |
| logging.info("%d TOTAL TEST TARGETS", len(results)) |
| return True |
| |
| total_run_count = 0 |
| total_passed_count = 0 |
| total_failed_count = 0 |
| total_flaky_failed_count = 0 |
| total_filtered_count = 0 |
| |
| print() # Explicit print for empty formatting line. |
| logging.info("TEST RUN COMPLETE.") |
| if results: |
| print() # Explicit print for empty formatting line. |
| |
| # If the number of run tests from a test binary cannot be |
| # determined, assume an error occurred while running it. |
| error = False |
| |
| failed_test_groups = [] |
| |
| for result_set in results: |
| target_name = result_set[0] |
| run_count = result_set[1] |
| passed_count = result_set[2] |
| failed_count = result_set[3] |
| failed_tests = result_set[4] |
| return_code = result_set[5] |
| actual_failed_tests = [] |
| flaky_failed_tests = [] |
| filtered_tests = self._GetFilteredTestList(target_name) |
| |
| for test_name in failed_tests: |
| if ".FLAKY_" in test_name: |
| flaky_failed_tests.append(test_name) |
| else: |
| actual_failed_tests.append(test_name) |
| |
| actual_failed_count = len(actual_failed_tests) |
| flaky_failed_count = len(flaky_failed_tests) |
| filtered_count = len(filtered_tests) |
| |
| # If our math does not agree with gtest... |
| if actual_failed_count + flaky_failed_count != failed_count: |
| logging.warning("Inconsistent count of actual and flaky failed tests.") |
| logging.info("") # formatting newline. |
| |
| # Retry the flaky test cases that failed, and mark them as passed if they |
| # succeed within the retry limit. |
| if flaky_failed_count > 0: |
| logging.info("RE-RUNNING FLAKY TESTS.\n") |
| flaky_passed_tests = [] |
| for test_case in flaky_failed_tests: |
| for retry in range(_FLAKY_RETRY_LIMIT): |
| # Sometimes the returned test "name" includes information about the |
| # parameter that was passed to it. This needs to be stripped off. |
| retry_result = self._RunTest(target_name, test_case.split(",")[0]) |
| print() # Explicit print for empty formatting line. |
| if retry_result[2] == 1: |
| flaky_passed_tests.append(test_case) |
| logging.info("%s succeeded on run #%d!\n", test_case, retry + 2) |
| break |
| else: |
| logging.warning("%s failed. Re-running...\n", test_case) |
| # Remove newly passing flaky tests from failing flaky test list. |
| for test_case in flaky_passed_tests: |
| flaky_failed_tests.remove(test_case) |
| flaky_failed_count -= len(flaky_passed_tests) |
| passed_count += len(flaky_passed_tests) |
| else: |
| logging.info("") # formatting newline. |
| |
| test_status = "SUCCEEDED" |
| |
| # Always mark as FAILED if we have a non-zero return code, or failing |
| # test. |
| if return_code != 0 or actual_failed_count > 0 or flaky_failed_count > 0: |
| error = True |
| test_status = "FAILED" |
| failed_test_groups.append(target_name) |
| # Be specific about the cause of failure if it was caused due to crash |
| # upon exit. Normal Gtest failures have return_code = 1; test crashes |
| # yield different return codes (e.g. segfault has return_code = 11). |
| if (return_code != 1 and actual_failed_count == 0 and |
| flaky_failed_count == 0): |
| test_status = "FAILED (CRASHED)" |
| |
| logging.info("%s: %s.", target_name, test_status) |
| if return_code != 0 and run_count == 0 and filtered_count == 0: |
| logging.info(" Results not available. Did the test crash?") |
| logging.info("") # formatting newline. |
| continue |
| |
| logging.info(" TESTS RUN: %d", run_count) |
| total_run_count += run_count |
| # Output the number of passed, failed, flaked, and filtered tests. |
| if passed_count > 0: |
| logging.info(" TESTS PASSED: %d", passed_count) |
| total_passed_count += passed_count |
| if actual_failed_count > 0: |
| logging.info(" TESTS FAILED: %d", actual_failed_count) |
| total_failed_count += actual_failed_count |
| if flaky_failed_count > 0: |
| logging.info(" TESTS FLAKED: %d", flaky_failed_count) |
| total_flaky_failed_count += flaky_failed_count |
| if filtered_count > 0: |
| logging.info(" TESTS FILTERED: %d", filtered_count) |
| total_filtered_count += filtered_count |
| # Output the names of the failed, flaked, and filtered tests. |
| if actual_failed_count > 0: |
| logging.info("") # formatting newline. |
| logging.info(" FAILED TESTS:") |
| for line in actual_failed_tests: |
| logging.info(" %s", line) |
| if flaky_failed_count > 0: |
| logging.info("") # formatting newline. |
| logging.info(" FLAKED TESTS:") |
| for line in flaky_failed_tests: |
| logging.info(" %s", line) |
| if filtered_count > 0: |
| logging.info("") # formatting newline. |
| logging.info(" FILTERED TESTS:") |
| for line in filtered_tests: |
| logging.info(" %s", line) |
| logging.info("") # formatting newline. |
| logging.info(" RETURN CODE: %d", return_code) |
| logging.info("") # formatting newline. |
| |
| overall_status = "SUCCEEDED" |
| result = True |
| |
| # Any failing test or other errors will make the run a failure. This |
| # includes flaky tests if they did not pass any of their retries. |
| if error or total_failed_count > 0 or total_flaky_failed_count > 0: |
| overall_status = "FAILED" |
| result = False |
| |
| logging.info("TEST RUN %s.", overall_status) |
| if failed_test_groups: |
| failed_test_groups = list(set(failed_test_groups)) |
| logging.info(" FAILED TESTS GROUPS: %s", ", ".join(failed_test_groups)) |
| logging.info(" TOTAL TESTS RUN: %d", total_run_count) |
| logging.info(" TOTAL TESTS PASSED: %d", total_passed_count) |
| logging.info(" TOTAL TESTS FAILED: %d", total_failed_count) |
| logging.info(" TOTAL TESTS FLAKED: %d", total_flaky_failed_count) |
| logging.info(" TOTAL TESTS FILTERED: %d", total_filtered_count) |
| |
| return result |
| |
| def BuildAllTargets(self, ninja_flags): |
| """Runs build step for all specified unit test binaries. |
| |
| Args: |
| ninja_flags: Command line flags to pass to ninja. |
| |
| Returns: |
| True if the build succeeds, False if not. |
| """ |
| result = True |
| |
| try: |
| if ninja_flags: |
| extra_flags = [ninja_flags] |
| else: |
| extra_flags = [] |
| |
| # The loader is not built with the same platform configuration as our |
| # tests so we need to build it separately. |
| if self.loader_platform: |
| build_tests.BuildTargets( |
| [_LOADER_TARGET, _CRASHPAD_TARGET], self.loader_out_directory, |
| self.dry_run, |
| extra_flags + [os.getenv("TEST_RUNNER_PLATFORM_BUILD_FLAGS", "")]) |
| build_tests.BuildTargets( |
| self.test_targets, self.out_directory, self.dry_run, |
| extra_flags + [os.getenv("TEST_RUNNER_BUILD_FLAGS", "")]) |
| |
| except subprocess.CalledProcessError as e: |
| result = False |
| sys.stderr.write("Error occurred during building.\n") |
| sys.stderr.write("{}\n".format(e)) |
| |
| return result |
| |
| def RunAllTests(self): |
| """Runs all specified test binaries. |
| |
| Returns: |
| True if the test run succeeded, False if not. |
| """ |
| results = [] |
| # Sort the targets so they are run in alphabetical order |
| for test_target in sorted(self.test_targets.keys()): |
| results.append(self._RunTest(test_target)) |
| |
| return self._ProcessAllTestResults(results) |
| |
| def GenerateCoverageReport(self): |
| """Generate the source code coverage report.""" |
| available_profraw_files = [] |
| available_targets = [] |
| for target in sorted(self.test_targets.keys()): |
| profraw_file = os.path.join(self.coverage_directory, target + ".profraw") |
| if os.path.isfile(profraw_file): |
| available_profraw_files.append(profraw_file) |
| available_targets.append(target) |
| |
| # If there are no profraw files, then there is no work to do. |
| if not available_profraw_files: |
| return |
| |
| report_name = "report" |
| profdata_name = os.path.join(self.coverage_directory, |
| report_name + ".profdata") |
| merge_cmd_list = [ |
| "llvm-profdata", "merge", "-sparse=true", "-o", profdata_name |
| ] |
| merge_cmd_list += available_profraw_files |
| |
| self._Exec(merge_cmd_list) |
| show_cmd_list = [ |
| "llvm-cov", "show", "-instr-profile=" + profdata_name, "-format=html", |
| "-output-dir=" + os.path.join(self.coverage_directory, "html"), |
| available_targets[0] |
| ] |
| show_cmd_list += ["-object=" + target for target in available_targets[1:]] |
| self._Exec(show_cmd_list) |
| |
| report_cmd_list = [ |
| "llvm-cov", "report", "-instr-profile=" + profdata_name, |
| available_targets[0] |
| ] |
| report_cmd_list += ["-object=" + target for target in available_targets[1:]] |
| self._Exec( |
| report_cmd_list, |
| output_file=os.path.join(self.coverage_directory, report_name + ".txt")) |
| return |
| |
| |
| def main(): |
| SetupDefaultLoggingConfig() |
| arg_parser = argparse.ArgumentParser() |
| command_line.AddLauncherArguments(arg_parser) |
| arg_parser.add_argument( |
| "-b", |
| "--build", |
| action="store_true", |
| help="Specifies whether to build the tests.") |
| arg_parser.add_argument( |
| "-r", |
| "--run", |
| action="store_true", |
| help="Specifies whether to run the tests." |
| " If both the \"--build\" and \"--run\" flags are not" |
| " provided, this is the default.") |
| arg_parser.add_argument( |
| "-n", |
| "--dry_run", |
| action="store_true", |
| help="Specifies to show what would be done without actually doing it.") |
| arg_parser.add_argument( |
| "-t", |
| "--target_name", |
| action="append", |
| help="Name of executable target. Repeatable for multiple targets.") |
| arg_parser.add_argument( |
| "--platform_tests_only", |
| action="store_true", |
| help="Runs only a small set of tests involved testing the platform.") |
| arg_parser.add_argument( |
| "-a", |
| "--application_name", |
| default="cobalt", # TODO: Pass this in explicitly. |
| help="Name of the application to run tests under, e.g. 'cobalt'.") |
| arg_parser.add_argument( |
| "--ninja_flags", |
| help="Flags to pass to the ninja build system. Provide them exactly" |
| " as you would on the command line between a set of double quotation" |
| " marks.") |
| arg_parser.add_argument( |
| "-x", |
| "--xml_output_dir", |
| help="If defined, results will be saved as xml files in given directory." |
| " Output for each test suite will be in it's own subdirectory and file:" |
| " <xml_output_dir>/<test_suite_name>/sponge_log.xml") |
| arg_parser.add_argument( |
| "-l", |
| "--log_xml_results", |
| action="store_true", |
| help="If set, results will be logged in xml format after all tests are" |
| " complete. --xml_output_dir will be ignored.") |
| arg_parser.add_argument( |
| "-w", |
| "--launcher_args", |
| help="Pass space-separated arguments to control launcher behaviour. " |
| "Arguments are plaform specific and may not be implemented for all " |
| "platforms. Common arguments are:\n\t'noinstall' - skip install steps " |
| "before running the test\n\t'systools' - use system-installed tools.") |
| args = arg_parser.parse_args() |
| |
| if (args.loader_platform and not args.loader_config or |
| args.loader_config and not args.loader_platform): |
| arg_parser.error( |
| "You must specify both --loader_platform and --loader_config.") |
| return 1 |
| |
| # Extra arguments for the test target |
| target_params = [] |
| if args.target_params: |
| target_params = args.target_params.split(" ") |
| |
| launcher_args = [] |
| if args.launcher_args: |
| launcher_args = args.launcher_args.split(" ") |
| |
| if args.dry_run: |
| launcher_args.append(abstract_launcher.ARG_DRYRUN) |
| |
| runner = TestRunner(args.platform, args.config, args.loader_platform, |
| args.loader_config, args.device_id, args.target_name, |
| target_params, args.out_directory, |
| args.loader_out_directory, args.platform_tests_only, |
| args.application_name, args.dry_run, args.xml_output_dir, |
| args.log_xml_results, launcher_args) |
| |
| def Abort(signum, frame): |
| del signum, frame # Unused. |
| sys.stderr.write("Killing threads\n") |
| for active_thread in runner.threads: |
| active_thread.Kill() |
| sys.exit(1) |
| |
| signal.signal(signal.SIGINT, Abort) |
| # If neither build nor run has been specified, assume the client |
| # just wants to run. |
| if not args.build and not args.run: |
| args.run = True |
| |
| build_success = True |
| run_success = True |
| |
| if args.dry_run: |
| sys.stderr.write("=== Dry run ===\n") |
| |
| if args.build: |
| build_success = runner.BuildAllTargets(args.ninja_flags) |
| # If the build fails, don't try to run the tests. |
| if not build_success: |
| return 1 |
| |
| if args.run: |
| run_success = runner.RunAllTests() |
| |
| runner.GenerateCoverageReport() |
| |
| # If either step has failed, count the whole test run as failed. |
| if not build_success or not run_success: |
| return 1 |
| else: |
| return 0 |
| |
| |
| if __name__ == "__main__": |
| sys.exit(main()) |
