layout: doc title: “Starboard Module Reference: media.h”

Provides media definitions that are common between the Decoder and Player interfaces.

Macros

kSbMediaBitsPerPixelInvalid

Value used when a video's bits per pixel is not known.

kSbMediaVideoResolutionDimensionInvalid

Value used when a video's resolution is not known.

Enums

SbMediaAudioCodec

Types of audio elementary streams that can be supported.

Values

  • kSbMediaAudioCodecNone
  • kSbMediaAudioCodecAac
  • kSbMediaAudioCodecAc3
  • kSbMediaAudioCodecEac3
  • kSbMediaAudioCodecOpus
  • kSbMediaAudioCodecVorbis

SbMediaAudioCodingType

Possible audio coding types.

Values

  • kSbMediaAudioCodingTypeNone
  • kSbMediaAudioCodingTypeAac
  • kSbMediaAudioCodingTypeAc3
  • kSbMediaAudioCodingTypeAtrac
  • kSbMediaAudioCodingTypeBitstream
  • kSbMediaAudioCodingTypeDolbyDigitalPlus
  • kSbMediaAudioCodingTypeDts
  • kSbMediaAudioCodingTypeMpeg1
  • kSbMediaAudioCodingTypeMpeg2
  • kSbMediaAudioCodingTypeMpeg3
  • kSbMediaAudioCodingTypePcm

SbMediaAudioConnector

Possible audio connector types.

Values

  • kSbMediaAudioConnectorNone
  • kSbMediaAudioConnectorAnalog
  • kSbMediaAudioConnectorBluetooth
  • kSbMediaAudioConnectorHdmi
  • kSbMediaAudioConnectorNetwork
  • kSbMediaAudioConnectorSpdif
  • kSbMediaAudioConnectorUsb

SbMediaAudioFrameStorageType

Possible audio frame storage types.

Values

  • kSbMediaAudioFrameStorageTypeInterleaved

    The samples of a multi-channel audio stream are stored in one continuous buffer. Samples at the same timestamp are stored one after another. For example, for a stereo stream with channels L and R that contains samples with timestamps 0, 1, 2, etc., the samples are stored in one buffer as “L0 R0 L1 R1 L2 R2 ...”.

  • kSbMediaAudioFrameStorageTypePlanar

    The samples of each channel are stored in their own continuous buffer. For example, for a stereo stream with channels L and R that contains samples with timestamps 0, 1, 2, etc., the samples are stored in two buffers “L0 L1 L2 ...” and “R0 R1 R2 ...”.

SbMediaAudioSampleType

Possible audio sample types.

Values

  • kSbMediaAudioSampleTypeInt16Deprecated
  • kSbMediaAudioSampleTypeFloat32

SbMediaRangeId

This corresponds to the WebM Range enum which is part of WebM color data (see http://www.webmproject.org/docs/container/#Range ). H.264 only uses a bool, which corresponds to the LIMITED/FULL values. Chrome- specific values start at 1000.

Values

  • kSbMediaRangeIdUnspecified

    Range is not explicitly specified / unknown.

  • kSbMediaRangeIdLimited

    Limited Rec. 709 color range with RGB values ranging from 16 to 235.

  • kSbMediaRangeIdFull

    Full RGB color range with RGB values from 0 to 255.

  • kSbMediaRangeIdDerived

    Range is defined by TransferId/MatrixId.

  • kSbMediaRangeIdLast

SbMediaSupportType

Indicates how confident the device is that it can play media resources of the given type. The values are a direct map of the canPlayType() method specified at the following link: https://www.w3.org/TR/2011/WD-html5-20110113/video.html#dom-navigator-canplaytype

Values

  • kSbMediaSupportTypeNotSupported

    The media type cannot be played.

  • kSbMediaSupportTypeMaybe

    Cannot determine if the media type is playable without playing it.

  • kSbMediaSupportTypeProbably

    The media type seems to be playable.

SbMediaType

Types of media component streams.

Values

  • kSbMediaTypeAudio

    Value used for audio streams.

  • kSbMediaTypeVideo

    Value used for video streams.

SbMediaVideoCodec

Types of video elementary streams that could be supported.

Values

  • kSbMediaVideoCodecNone
  • kSbMediaVideoCodecH264
  • kSbMediaVideoCodecH265
  • kSbMediaVideoCodecMpeg2
  • kSbMediaVideoCodecTheora
  • kSbMediaVideoCodecVc1
  • kSbMediaVideoCodecAv1
  • kSbMediaVideoCodecVp8
  • kSbMediaVideoCodecVp9

Structs

SbMediaAudioConfiguration

A structure describing the audio configuration parameters of a single audio output.

Members

  • int index

    The platform-defined index of the associated audio output.

  • SbMediaAudioConnector connector

    The type of audio connector. Will be the empty kSbMediaAudioConnectorNone if this device cannot provide this information.

  • SbTime latency

    The expected latency of audio over this output, in microseconds, or 0 if this device cannot provide this information.

  • SbMediaAudioCodingType coding_type

    The type of audio coding used over this connection.

  • int number_of_channels

    The number of audio channels currently supported by this device output, or 0 if this device cannot provide this information, in which case the caller can probably assume stereo output.

SbMediaAudioSampleInfo

An audio sample info, which is a description of a given audio sample. This acts as a set of instructions to the audio decoder.

The audio sample info consists of information found in the WAVEFORMATEX structure, as well as other information for the audio decoder, including the Audio-specific configuration field. The WAVEFORMATEX structure is specified at http://msdn.microsoft.com/en-us/library/dd390970(v=vs.85).aspxx) .

Members

  • SbMediaAudioCodec codec

    The audio codec of this sample.

  • const char * mime

    The mime of the audio stream when codec isn't kSbMediaAudioCodecNone. It may point to an empty string if the mime is not available, and it can only be set to NULL when codec is kSbMediaAudioCodecNone.

  • uint16_t format_tag

    The waveform-audio format type code.

  • uint16_t number_of_channels

    The number of audio channels in this format. 1 for mono, 2 for stereo.

  • uint32_t samples_per_second

    The sampling rate.

  • uint32_t average_bytes_per_second

    The number of bytes per second expected with this format.

  • uint16_t block_alignment

    Byte block alignment, e.g, 4.

  • uint16_t bits_per_sample

    The bit depth for the stream this represents, e.g. 8 or 16.

  • uint16_t audio_specific_config_size

    The size, in bytes, of the audio_specific_config.

  • const void * audio_specific_config

    The AudioSpecificConfig, as specified in ISO/IEC-14496-3, section 1.6.2.1: http://read.pudn.com/downloads98/doc/comm/401153/14496/ISO_IEC_14496-3%20Part%203%20Audio/C036083E_SUB1.PDF

SbMediaColorMetadata

HDR (High Dynamic Range) Metadata common for HDR10 and WebM/VP9-based HDR formats, together with the ColorSpace. HDR reproduces a greater dynamic range of luminosity than is possible with standard digital imaging. See the Consumer Electronics Association press release: https://www.cta.tech/News/Press-Releases/2015/August/CEA-Defines-%E2%80%98HDR-Compatible%E2%80%99-Displays.aspx

Members

  • unsigned int bits_per_channel

    Number of decoded bits per channel. A value of 0 indicates that the BitsPerChannel is unspecified.

  • unsigned int chroma_subsampling_horizontal

    The amount of pixels to remove in the Cr and Cb channels for every pixel not removed horizontally. Example: For video with 4:2:0 chroma subsampling, the chroma_subsampling_horizontal should be set to 1.

  • unsigned int chroma_subsampling_vertical

    The amount of pixels to remove in the Cr and Cb channels for every pixel not removed vertically. Example: For video with 4:2:0 chroma subsampling, the chroma_subsampling_vertical should be set to 1.

  • unsigned int cb_subsampling_horizontal

    The amount of pixels to remove in the Cb channel for every pixel not removed horizontally. This is additive with ChromaSubsamplingHorz. Example: For video with 4:2:1 chroma subsampling, the chroma_subsampling_horizontal should be set to 1 and cb_subsampling_horizontal should be set to 1.

  • unsigned int cb_subsampling_vertical

    The amount of pixels to remove in the Cb channel for every pixel not removed vertically. This is additive with chroma_subsampling_vertical.

  • unsigned int chroma_siting_horizontal

    How chroma is subsampled horizontally. (0: Unspecified, 1: Left Collocated, 2: Half).

  • unsigned int chroma_siting_vertical

    How chroma is subsampled vertically. (0: Unspecified, 1: Top Collocated, 2: Half).

  • SbMediaMasteringMetadata mastering_metadata

    [HDR Metadata field] SMPTE 2086 mastering data.

  • unsigned int max_cll

    [HDR Metadata field] Maximum brightness of a single pixel (Maximum Content Light Level) in candelas per square meter (cd/m^2).

  • unsigned int max_fall

    [HDR Metadata field] Maximum brightness of a single full frame (Maximum Frame-Average Light Level) in candelas per square meter (cd/m^2).

  • SbMediaPrimaryId primaries

    [Color Space field] The colour primaries of the video. For clarity, the value and meanings for Primaries are adopted from Table 2 of ISO/IEC 23001-8:2013/DCOR1. (0: Reserved, 1: ITU-R BT.709, 2: Unspecified, 3: Reserved, 4: ITU-R BT.470M, 5: ITU-R BT.470BG, 6: SMPTE 170M, 7: SMPTE 240M, 8: FILM, 9: ITU-R BT.2020, 10: SMPTE ST 428-1, 22: JEDEC P22 phosphors).

  • SbMediaTransferId transfer

    [Color Space field] The transfer characteristics of the video. For clarity, the value and meanings for TransferCharacteristics 1-15 are adopted from Table 3 of ISO/IEC 23001-8:2013/DCOR1. TransferCharacteristics 16-18 are proposed values. (0: Reserved, 1: ITU-R BT.709, 2: Unspecified, 3: Reserved, 4: Gamma 2.2 curve, 5: Gamma 2.8 curve, 6: SMPTE 170M, 7: SMPTE 240M, 8: Linear, 9: Log, 10: Log Sqrt, 11: IEC 61966-2-4, 12: ITU-R BT.1361 Extended Colour Gamut, 13: IEC 61966-2-1, 14: ITU-R BT.2020 10 bit, 15: ITU-R BT.2020 12 bit, 16: SMPTE ST 2084, 17: SMPTE ST 428-1 18: ARIB STD-B67 (HLG)).

  • SbMediaMatrixId matrix

    [Color Space field] The Matrix Coefficients of the video used to derive luma and chroma values from red, green, and blue color primaries. For clarity, the value and meanings for MatrixCoefficients are adopted from Table 4 of ISO/IEC 23001-8:2013/DCOR1. (0:GBR, 1: BT709, 2: Unspecified, 3: Reserved, 4: FCC, 5: BT470BG, 6: SMPTE 170M, 7: SMPTE 240M, 8: YCOCG, 9: BT2020 Non- constant Luminance, 10: BT2020 Constant Luminance).

  • SbMediaRangeId range

    [Color Space field] Clipping of the color ranges. (0: Unspecified, 1: Broadcast Range, 2: Full range (no clipping), 3: Defined by MatrixCoefficients/TransferCharacteristics).

  • float custom_primary_matrix

    [Color Space field] Only used if primaries == kSbMediaPrimaryIdCustom. This a row-major ordered 3 x 4 submatrix of the 4 x 4 transform matrix. The 4th row is completed as (0, 0, 0, 1).

SbMediaMasteringMetadata

SMPTE 2086 mastering data http://ieeexplore.ieee.org/document/7291707/ This standard specifies the metadata items to specify the color volume (the color primaries, white point, and luminance range) of the display that was used in mastering video content. The metadata is specified as a set of values independent of any specific digital representation. Also see the WebM container guidelines: https://www.webmproject.org/docs/container/

Members

  • float primary_r_chromaticity_x

    Red X chromaticity coordinate as defined by CIE 1931. In range [0, 1].

  • float primary_r_chromaticity_y

    Red Y chromaticity coordinate as defined by CIE 1931. In range [0, 1].

  • float primary_g_chromaticity_x

    Green X chromaticity coordinate as defined by CIE 1931. In range [0, 1].

  • float primary_g_chromaticity_y

    Green Y chromaticity coordinate as defined by CIE 1931. In range [0, 1].

  • float primary_b_chromaticity_x

    Blue X chromaticity coordinate as defined by CIE 1931. In range [0, 1].

  • float primary_b_chromaticity_y

    Blue Y chromaticity coordinate as defined by CIE 1931. In range [0, 1].

  • float white_point_chromaticity_x

    White X chromaticity coordinate as defined by CIE 1931. In range [0, 1].

  • float white_point_chromaticity_y

    White Y chromaticity coordinate as defined by CIE 1931. In range [0, 1].

  • float luminance_max

    Maximum luminance. Shall be represented in candelas per square meter (cd/m^2). In range [0, 9999.99].

  • float luminance_min

    Minimum luminance. Shall be represented in candelas per square meter (cd/m^2). In range [0, 9999.99].

SbMediaVideoSampleInfo

The set of information required by the decoder or player for each video sample.

Members

  • SbMediaVideoCodec codec

    The video codec of this sample.

  • const char * mime

    The mime of the video stream when codec isn't kSbMediaVideoCodecNone. It may point to an empty string if the mime is not available, and it can only be set to NULL when codec is kSbMediaVideoCodecNone.

  • const char * max_video_capabilities

    Indicates the max video capabilities required. The web app will not provide a video stream exceeding the maximums described by this parameter. Allows the platform to optimize playback pipeline for low quality video streams if it knows that it will never adapt to higher quality streams. The string uses the same format as the string passed in to SbMediaCanPlayMimeAndKeySystem(), for example, when it is set to “width=1920; height=1080; framerate=15;”, the video will never adapt to resolution higher than 1920x1080 or frame per second higher than 15 fps. When the maximums are unknown, this will be set to an empty string. It can only be set to NULL when codec is kSbMediaVideoCodecNone.

  • bool is_key_frame

    Indicates whether the associated sample is a key frame (I-frame). Video key frames must always start with SPS and PPS NAL units.

  • int frame_width

    The frame width of this sample, in pixels. Also could be parsed from the Sequence Parameter Set (SPS) NAL Unit. Frame dimensions must only change on key frames, but may change on any key frame.

  • int frame_height

    The frame height of this sample, in pixels. Also could be parsed from the Sequence Parameter Set (SPS) NAL Unit. Frame dimensions must only change on key frames, but may change on any key frame.

  • SbMediaColorMetadata color_metadata

    HDR metadata common for HDR10 and WebM/VP9-based HDR formats as well as the Color Space, and Color elements: MatrixCoefficients, BitsPerChannel, ChromaSubsamplingHorz, ChromaSubsamplingVert, CbSubsamplingHorz, CbSubsamplingVert, ChromaSitingHorz, ChromaSitingVert, Range, TransferCharacteristics, and Primaries described here: https://matroska.org/technical/specs/index.html . This will only be specified on frames where the HDR metadata and color / color space might have changed (e.g. keyframes).

Functions

SbMediaCanPlayMimeAndKeySystem

Returns information about whether the playback of the specific media described by mime and encrypted using key_system can be played.

Note that neither mime nor key_system can be NULL. This function returns kSbMediaSupportNotSupported if either is NULL.

mime: The mime information of the media in the form of video/webm or video/mp4; codecs="avc1.42001E". It may include arbitrary parameters like “codecs”, “channels”, etc. Note that the “codecs” parameter may contain more than one codec, delimited by comma. key_system: A lowercase value in the form of “com.example.somesystem” as suggested by https://w3c.github.io/encrypted-media/#key-system) that can be matched exactly with known DRM key systems of the platform. When key_system is an empty string, the return value is an indication for non-encrypted media.

An implementation may choose to support key_system with extra attributes, separated by ‘;’, like com.example.somesystem; attribute_name1="value1"; attribute_name2=value1. If key_system with attributes is not supported by an implementation, it should treat key_system as if it contains only the key system, and reject any input containing extra attributes, i.e. it can keep using its existing implementation. When an implementation supports key_system with attributes, it has to support all attributes defined by the Starboard version the implementation uses. An implementation should ignore any unknown attributes, and make a decision solely based on the key system and the known attributes. For example, if an implementation supports “com.widevine.alpha”, it should also return kSbMediaSupportTypeProbably kSbMediaSupportTypeProbably when key_system is com.widevine.alpha; invalid_attribute="invalid_value". Currently the only attribute has to be supported is encryptionscheme. It reflects the value passed to encryptionScheme encryptionScheme of MediaKeySystemMediaCapability, as defined in https://wicg.github.io/encrypted-media-encryption-scheme/,,) which can take value “cenc”, “cbcs”, or “cbcs-1-9”. Empty string is not a valid value for encryptionscheme and the implementation should return kSbMediaSupportTypeNotSupported kSbMediaSupportTypeNotSupported when encryptionscheme is set to "". The implementation should return kSbMediaSupportTypeNotSupported kSbMediaSupportTypeNotSupported for unknown values of known attributes. For example, if an implementation supports “encryptionscheme” with value “cenc”, “cbcs”, or “cbcs-1-9”, then it should return kSbMediaSupportTypeProbably kSbMediaSupportTypeProbably when key_system is com.widevine.alpha; encryptionscheme="cenc", and return kSbMediaSupportTypeNotSupported kSbMediaSupportTypeNotSupported when key_system is com.widevine.alpha; encryptionscheme="invalid". If an implementation supports key system with attributes on one key system, it has to support key system with attributes on all key systems supported.

Declaration

SbMediaSupportType SbMediaCanPlayMimeAndKeySystem(const char *mime, const char *key_system)

SbMediaGetAudioBufferBudget

Specifies the maximum amount of memory used by audio buffers of media source before triggering a garbage collection. A large value will cause more memory being used by audio buffers but will also make the app less likely to re- download audio data. Note that the app may experience significant difficulty if this value is too low.

Declaration

int SbMediaGetAudioBufferBudget()

SbMediaGetAudioConfiguration

Retrieves the current physical audio configuration of audio output output_index on this device and places it in out_configuration, which must not be NULL.

This function returns false if nothing could be determined on this platform or if output_index does not exist on this device.

out_configuration: The variable that holds the audio configuration information.

Declaration

bool SbMediaGetAudioConfiguration(int output_index, SbMediaAudioConfiguration *out_configuration)

SbMediaGetAudioOutputCount

Returns the number of audio outputs currently available on this device. Even if the number of outputs or their audio configurations can't be determined, it is expected that the platform will at least return a single output that supports at least stereo.

Declaration

int SbMediaGetAudioOutputCount()

SbMediaGetBufferAlignment

The media buffer will be allocated using the returned alignment. Set this to a larger value may increase the memory consumption of media buffers.type: the media type of the stream (audio or video).

Declaration

int SbMediaGetBufferAlignment(SbMediaType type)

SbMediaGetBufferAllocationUnit

When the media stack needs more memory to store media buffers, it will allocate extra memory in units returned by SbMediaGetBufferAllocationUnit. This can return 0, in which case the media stack will allocate extra memory on demand. When SbMediaGetInitialBufferCapacity and this function both return 0, the media stack will allocate individual buffers directly using SbMemory functions.

Declaration

int SbMediaGetBufferAllocationUnit()

SbMediaGetBufferGarbageCollectionDurationThreshold

Specifies the duration threshold of media source garbage collection. When the accumulated duration in a source buffer exceeds this value, the media source implementation will try to eject existing buffers from the cache. This is usually triggered when the video being played has a simple content and the encoded data is small. In such case this can limit how much is allocated for the book keeping data of the media buffers and avoid OOM of system heap. This should return 170 seconds for most of the platforms. But it can be further reduced on systems with extremely low memory.

Declaration

SbTime SbMediaGetBufferGarbageCollectionDurationThreshold()

SbMediaGetBufferPadding

Extra bytes allocated at the end of a media buffer to ensure that the buffer can be use optimally by specific instructions like SIMD. Set to 0 to remove any padding.type: the media type of the stream (audio or video).

Declaration

int SbMediaGetBufferPadding(SbMediaType type)

SbMediaGetBufferStorageType

Returns SbMediaBufferStorageType of type SbMediaStorageTypeMemory or SbMediaStorageTypeFile. For memory storage, the media buffers will be stored in main memory allocated by SbMemory functions. For file storage, the media buffers will be stored in a temporary file in the system cache folder acquired by calling SbSystemGetPath() with “kSbSystemPathCacheDirectory”. Note that when its value is “file” the media stack will still allocate memory to cache the the buffers in use.

Declaration

SbMediaBufferStorageType SbMediaGetBufferStorageType()

SbMediaGetInitialBufferCapacity

The amount of memory that will be used to store media buffers allocated during system startup. To allocate a large chunk at startup helps with reducing fragmentation and can avoid failures to allocate incrementally. This can return 0.

Declaration

int SbMediaGetInitialBufferCapacity()

SbMediaGetMaxBufferCapacity

The maximum amount of memory that will be used to store media buffers. This must be larger than sum of the video budget and audio budget. This is a soft limit and the app will continue to allocate media buffers even if the accumulated memory used by the media buffers exceeds the maximum buffer capacity. The allocation of media buffers may only fail when there is not enough memory in the system to fulfill the request, under which case the app will be terminated as under other OOM situations.

codec: the video codec associated with the buffer. resolution_width: the width of the video resolution. resolution_height: the height of the video resolution. bits_per_pixel: the bits per pixel. This value is larger for HDR than non- HDR video.

Declaration

int SbMediaGetMaxBufferCapacity(SbMediaVideoCodec codec, int resolution_width, int resolution_height, int bits_per_pixel)

SbMediaGetProgressiveBufferBudget

The memory used when playing mp4 videos that is not in DASH format. The resolution of such videos shouldn't go beyond 1080p. Its value should be less than the sum of SbMediaGetAudioBufferBudget and 'SbMediaGetVideoBufferBudget(..., 1920, 1080, ...) but not less than 8 MB.

codec: the video codec associated with the buffer. resolution_width: the width of the video resolution. resolution_height: the height of the video resolution. bits_per_pixel: the bits per pixel. This value is larger for HDR than non- HDR video.

Declaration

int SbMediaGetProgressiveBufferBudget(SbMediaVideoCodec codec, int resolution_width, int resolution_height, int bits_per_pixel)

SbMediaGetVideoBufferBudget

Specifies the maximum amount of memory used by video buffers of media source before triggering a garbage collection. A large value will cause more memory being used by video buffers but will also make app less likely to re-download video data. Note that the app may experience significant difficulty if this value is too low.

codec: the video codec associated with the buffer. resolution_width: the width of the video resolution. resolution_height: the height of the video resolution. bits_per_pixel: the bits per pixel. This value is larger for HDR than non- HDR video.

Declaration

int SbMediaGetVideoBufferBudget(SbMediaVideoCodec codec, int resolution_width, int resolution_height, int bits_per_pixel)

SbMediaIsBufferPoolAllocateOnDemand

When either SbMediaGetInitialBufferCapacity or SbMediaGetBufferAllocationUnit isn't zero, media buffers will be allocated using a memory pool. Set the following variable to true to allocate the media buffer pool memory on demand and return all memory to the system when there is no media buffer allocated. Setting the following value to false results in that Cobalt will allocate SbMediaGetInitialBufferCapacity bytes for media buffer on startup and will not release any media buffer memory back to the system even if there is no media buffers allocated.

Declaration

bool SbMediaIsBufferPoolAllocateOnDemand()

SbMediaIsBufferUsingMemoryPool

If SbMediaGetBufferUsingMemoryPool returns true, it indicates that media buffer pools should be allocated on demand, as opposed to using SbMemory* functions.

Declaration

bool SbMediaIsBufferUsingMemoryPool()

SbMediaSetAudioWriteDuration

Communicate to the platform how far past current_playback_position the app will write audio samples. The app will write all samples between current_playback_position and current_playback_position + duration, as soon as they are available. The app may sometimes write more samples than that, but the app only guarantees to write duration past current_playback_position in general. The platform is responsible for guaranteeing that when only duration audio samples are written at a time, no playback issues occur (such as transient or indefinite hanging). The platform may assume duration >= 0.5 seconds.

Declaration

void SbMediaSetAudioWriteDuration(SbTime duration)