// Copyright 2014 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

// This file intentionally does not have header guards, it's included
// inside a macro to generate values. The following line silences a
// presubmit warning that would otherwise be triggered by this:
// no-include-guard-because-multiply-included

// This file contains the list of QUIC protocol flags.

// Time period for which a given connection_id should live in the time-wait
// state.
QUIC_FLAG(int64_t, FLAGS_quic_time_wait_list_seconds, 200)

// Currently, this number is quite conservative.  The max QPS limit for an
// individual server silo is currently set to 1000 qps, though the actual max
// that we see in the wild is closer to 450 qps.  Regardless, this means that
// the longest time-wait list we should see is 200 seconds * 1000 qps, 200000.
// Of course, there are usually many queries per QUIC connection, so we allow a
// factor of 3 leeway.
//
// Maximum number of connections on the time-wait list. A negative value implies
// no configured limit.
QUIC_FLAG(int64_t, FLAGS_quic_time_wait_list_max_connections, 600000)

// Enables server-side support for QUIC stateless rejects.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_enable_quic_stateless_reject_support,
          true)

// If true, require handshake confirmation for QUIC connections, functionally
// disabling 0-rtt handshakes.
// TODO(rtenneti): Enable this flag after CryptoServerTest's are fixed.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_require_handshake_confirmation,
          false)

// If true, disable pacing in QUIC.
QUIC_FLAG(bool, FLAGS_quic_disable_pacing_for_perf_tests, false)

// If true, QUIC will use cheap stateless rejects without creating a full
// connection.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_use_cheap_stateless_rejects,
          true)

// If true, allows packets to be buffered in anticipation of a future CHLO, and
// allow CHLO packets to be buffered until next iteration of the event loop.
QUIC_FLAG(bool, FLAGS_quic_allow_chlo_buffering, true)

// If greater than zero, mean RTT variation is multiplied by the specified
// factor and added to the congestion window limit.
QUIC_FLAG(double, FLAGS_quic_bbr_rtt_variation_weight, 0.0f)

// Congestion window gain for QUIC BBR during PROBE_BW phase.
QUIC_FLAG(double, FLAGS_quic_bbr_cwnd_gain, 2.0f)

// Simplify QUIC\'s adaptive time loss detection to measure the necessary
// reordering window for every spurious retransmit.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_fix_adaptive_time_loss, false)

// When true, defaults to BBR congestion control instead of Cubic.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_default_to_bbr, false)

// If buffered data in QUIC stream is less than this threshold, buffers all
// provided data or asks upper layer for more data.
QUIC_FLAG(uint32_t, FLAGS_quic_buffered_data_threshold, 8192u)

// Max size of data slice in bytes for QUIC stream send buffer.
QUIC_FLAG(uint32_t, FLAGS_quic_send_buffer_max_data_slice_size, 4096u)

// If true, QUIC supports both QUIC Crypto and TLS 1.3 for the handshake
// protocol.
QUIC_FLAG(bool, FLAGS_quic_supports_tls_handshake, false)

// Allow QUIC to accept initial packet numbers that are random, not 1.
QUIC_FLAG(bool, FLAGS_quic_restart_flag_quic_enable_accept_random_ipn, false)

// If true, enable QUIC v43.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_enable_version_43, true)

// Enables 3 new connection options to make PROBE_RTT more aggressive
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_bbr_less_probe_rtt, false)

// If true, limit quic stream length to be below 2^62.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_stream_too_long, true)

// If true, enable QUIC v99.
QUIC_FLAG(bool, FLAGS_quic_enable_version_99, false)

// When true, set the initial congestion control window from connection options
// in QuicSentPacketManager rather than TcpCubicSenderBytes.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_unified_iw_options, false)

// Number of packets that the pacing sender allows in bursts during pacing.
QUIC_FLAG(int32_t, FLAGS_quic_lumpy_pacing_size, 1)

// Congestion window fraction that the pacing sender allows in bursts during
// pacing.
QUIC_FLAG(double, FLAGS_quic_lumpy_pacing_cwnd_fraction, 0.25f)

// Default enables QUIC ack decimation and adds a connection option to disable
// it.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_enable_ack_decimation, false)

// If true, QUIC offload pacing when using USPS as egress method.
QUIC_FLAG(bool, FLAGS_quic_restart_flag_quic_offload_pacing_to_usps2, false)

// Max time that QUIC can pace packets into the future in ms.
QUIC_FLAG(int32_t, FLAGS_quic_max_pace_time_into_future_ms, 10)

// Smoothed RTT fraction that a connection can pace packets into the future.
QUIC_FLAG(double, FLAGS_quic_pace_time_into_future_srtt_fraction, 0.125f)

// If true, enable QUIC v44.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_enable_version_44, true)

// Stop checking QuicUnackedPacketMap::HasUnackedRetransmittableFrames and
// instead rely on the existing check that bytes_in_flight > 0
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_optimize_inflight_check, false)

// When you\'re app-limited entering recovery, stay app-limited until you exit
// recovery in QUIC BBR.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_bbr_app_limited_recovery, false)

// If true, stop resetting ideal_next_packet_send_time_ in pacing sender.
QUIC_FLAG(
    bool,
    FLAGS_quic_reloadable_flag_quic_donot_reset_ideal_next_packet_send_time,
    false)

// If true, enable experiment for testing PCC congestion-control.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_enable_pcc3, false)

// When true, ensure BBR allows at least one MSS to be sent in response to an
// ACK in packet conservation.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_bbr_one_mss_conservation, false)

// Add 3 connection options to decrease the pacing and CWND gain in QUIC BBR
// STARTUP.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_bbr_slower_startup3, false)

// When true, the LOSS connection option allows for 1/8 RTT of reording instead
// of the current 1/8th threshold which has been found to be too large for fast
// loss recovery.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_eighth_rtt_loss_detection,
          false)

// Enables the BBQ5 connection option, which forces saved aggregation values to
// expire when the bandwidth increases more than 25% in QUIC BBR STARTUP.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_bbr_slower_startup4, false)

// If true, QuicCryptoServerConfig::EvaluateClientHello will use GetCertChain
// instead of the more expensive GetProof.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_use_get_cert_chain, false)

// If true, try to aggregate acked stream frames.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_aggregate_acked_stream_frames_2,
          false)

// If true, only process stateless reset packets on the client side.
QUIC_FLAG(
    bool,
    FLAGS_quic_reloadable_flag_quic_process_stateless_reset_at_client_only,
    false)

// If true, do not retransmit old window update frames.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_donot_retransmit_old_window_update2,
          false)

// If ture, make QuicSession::GetStream faster by skipping the lookup into
// static stream map, when possible.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_session_faster_get_stream,
          false)

// If true, when session decides what to write, set a approximate retransmission
// for packets to be retransmitted. Also check packet state in
// IsPacketUsefulForRetransmittableData.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_fix_is_useful_for_retrans, true)

// If true, QUIC connection will notify the debug visitor after a connectivity
// probing is sent.
QUIC_FLAG(
    bool,
    FLAGS_quic_reloadable_flag_quic_notify_debug_visitor_on_connectivity_probing_sent,
    true)

// If true, disable QUIC version 35.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_disable_version_35, false)
// If true, then QuicCryptoServerConfig::ProcessClientHelloAfterGetProof() will
// use the async interface to KeyExchange::CalculateSharedKeys.
QUIC_FLAG(bool, FLAGS_quic_restart_flag_quic_use_async_key_exchange, false)

// If true, increase size of random bytes in IETF stateless reset packet.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_more_random_bytes_in_stateless_reset,
          false)

// If true, use new, lower-overhead implementation of LRU cache for compressed
// certificates.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_new_lru_cache, false)

// When true and the BBR9 connection option is present, BBR only considers
// bandwidth samples app-limited if they're not filling the pipe.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_bbr_flexible_app_limited, false)

// If true, QuicSpdySession::OnStreamHeaderList() will close the connection
// if the stream id referenced indicates a static stream."
QUIC_FLAG(bool,
          FLAGS_quic_restart_flag_quic_check_stream_nonstatic_on_header_list,
          true)

// If true, calling StopReading() on a level-triggered QUIC stream sequencer
// will cause the sequencer to discard future data.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_stop_reading_when_level_triggered,
          false)

// If true, mark packets for loss retransmission even they do not contain
// retransmittable frames.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_fix_mark_for_loss_retransmission,
          false)

// If true, enable version 45.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_enable_version_45, false)

// If true, QuicSession::HasPendingCryptoData checks whether the crypto stream's
// send buffer is empty. This flag fixes a bug where the retransmission alarm
// mode is wrong for the first CHLO packet.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_fix_has_pending_crypto_data,
          true)

// This flag fixes a bug where a zombie stream cannot be correctly reset.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_fix_reset_zombie_streams, true)

// When true, fix initialization and updating of
// |time_of_first_packet_sent_after_receiving_| in QuicConnection.
QUIC_FLAG(
    bool,
    FLAGS_quic_reloadable_flag_quic_fix_time_of_first_packet_sent_after_receiving,
    true)

// If true, deprecate PostProcessAfterData from QuicConnection. This is used to
// fix a bug where window update causes session to write data.
QUIC_FLAG(bool,
          FLAGS_quic_reloadable_flag_quic_deprecate_post_process_after_data,
          true)

// If true, QuicSpdyClientSessionBase::OnPromiseHeaderList() will close the
// connection if the stream id referenced indicates a static stream.
QUIC_FLAG(
    bool,
    FLAGS_quic_reloadable_flag_quic_check_stream_nonstatic_on_promised_headers,
    false)

// When the STMP connection option is sent by the client, timestamps in the QUIC
// ACK frame are sent and processed.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_send_timestamps, false)

// If true, use a common stream ID limit checking method.
QUIC_FLAG(bool, FLAGS_quic_use_common_stream_check, false)

// When true, don't arm the path degrading alarm on the server side and stop
// using HasUnackedPackets to decide when to arm it.
QUIC_FLAG(bool, FLAGS_quic_reloadable_flag_quic_fix_path_degrading_alarm, false)