blob: 4e7652883c4159281fd0d038248d528595e53644 [file] [log] [blame]
// Copyright 2019 the V8 project authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#ifndef V8_REGEXP_REGEXP_COMPILER_H_
#define V8_REGEXP_REGEXP_COMPILER_H_
#include <bitset>
#include "src/base/small-vector.h"
#include "src/regexp/regexp-nodes.h"
namespace v8 {
namespace internal {
class DynamicBitSet;
class Isolate;
namespace regexp_compiler_constants {
// The '2' variant is has inclusive from and exclusive to.
// This covers \s as defined in ECMA-262 5.1, 15.10.2.12,
// which include WhiteSpace (7.2) or LineTerminator (7.3) values.
constexpr uc32 kRangeEndMarker = 0x110000;
constexpr int kSpaceRanges[] = {
'\t', '\r' + 1, ' ', ' ' + 1, 0x00A0, 0x00A1, 0x1680,
0x1681, 0x2000, 0x200B, 0x2028, 0x202A, 0x202F, 0x2030,
0x205F, 0x2060, 0x3000, 0x3001, 0xFEFF, 0xFF00, kRangeEndMarker};
constexpr int kSpaceRangeCount = arraysize(kSpaceRanges);
constexpr int kWordRanges[] = {'0', '9' + 1, 'A', 'Z' + 1, '_',
'_' + 1, 'a', 'z' + 1, kRangeEndMarker};
constexpr int kWordRangeCount = arraysize(kWordRanges);
constexpr int kDigitRanges[] = {'0', '9' + 1, kRangeEndMarker};
constexpr int kDigitRangeCount = arraysize(kDigitRanges);
constexpr int kSurrogateRanges[] = {kLeadSurrogateStart,
kLeadSurrogateStart + 1, kRangeEndMarker};
constexpr int kSurrogateRangeCount = arraysize(kSurrogateRanges);
constexpr int kLineTerminatorRanges[] = {0x000A, 0x000B, 0x000D, 0x000E,
0x2028, 0x202A, kRangeEndMarker};
constexpr int kLineTerminatorRangeCount = arraysize(kLineTerminatorRanges);
// More makes code generation slower, less makes V8 benchmark score lower.
constexpr int kMaxLookaheadForBoyerMoore = 8;
// In a 3-character pattern you can maximally step forwards 3 characters
// at a time, which is not always enough to pay for the extra logic.
constexpr int kPatternTooShortForBoyerMoore = 2;
} // namespace regexp_compiler_constants
inline bool IgnoreCase(JSRegExp::Flags flags) {
return (flags & JSRegExp::kIgnoreCase) != 0;
}
inline bool IsUnicode(JSRegExp::Flags flags) {
return (flags & JSRegExp::kUnicode) != 0;
}
inline bool IsSticky(JSRegExp::Flags flags) {
return (flags & JSRegExp::kSticky) != 0;
}
inline bool IsGlobal(JSRegExp::Flags flags) {
return (flags & JSRegExp::kGlobal) != 0;
}
inline bool DotAll(JSRegExp::Flags flags) {
return (flags & JSRegExp::kDotAll) != 0;
}
inline bool Multiline(JSRegExp::Flags flags) {
return (flags & JSRegExp::kMultiline) != 0;
}
inline bool NeedsUnicodeCaseEquivalents(JSRegExp::Flags flags) {
// Both unicode and ignore_case flags are set. We need to use ICU to find
// the closure over case equivalents.
return IsUnicode(flags) && IgnoreCase(flags);
}
// Details of a quick mask-compare check that can look ahead in the
// input stream.
class QuickCheckDetails {
public:
QuickCheckDetails()
: characters_(0), mask_(0), value_(0), cannot_match_(false) {}
explicit QuickCheckDetails(int characters)
: characters_(characters), mask_(0), value_(0), cannot_match_(false) {}
bool Rationalize(bool one_byte);
// Merge in the information from another branch of an alternation.
void Merge(QuickCheckDetails* other, int from_index);
// Advance the current position by some amount.
void Advance(int by, bool one_byte);
void Clear();
bool cannot_match() { return cannot_match_; }
void set_cannot_match() { cannot_match_ = true; }
struct Position {
Position() : mask(0), value(0), determines_perfectly(false) {}
uc32 mask;
uc32 value;
bool determines_perfectly;
};
int characters() { return characters_; }
void set_characters(int characters) { characters_ = characters; }
Position* positions(int index) {
DCHECK_LE(0, index);
DCHECK_GT(characters_, index);
return positions_ + index;
}
uint32_t mask() { return mask_; }
uint32_t value() { return value_; }
private:
// How many characters do we have quick check information from. This is
// the same for all branches of a choice node.
int characters_;
Position positions_[4];
// These values are the condensate of the above array after Rationalize().
uint32_t mask_;
uint32_t value_;
// If set to true, there is no way this quick check can match at all.
// E.g., if it requires to be at the start of the input, and isn't.
bool cannot_match_;
};
// Improve the speed that we scan for an initial point where a non-anchored
// regexp can match by using a Boyer-Moore-like table. This is done by
// identifying non-greedy non-capturing loops in the nodes that eat any
// character one at a time. For example in the middle of the regexp
// /foo[\s\S]*?bar/ we find such a loop. There is also such a loop implicitly
// inserted at the start of any non-anchored regexp.
//
// When we have found such a loop we look ahead in the nodes to find the set of
// characters that can come at given distances. For example for the regexp
// /.?foo/ we know that there are at least 3 characters ahead of us, and the
// sets of characters that can occur are [any, [f, o], [o]]. We find a range in
// the lookahead info where the set of characters is reasonably constrained. In
// our example this is from index 1 to 2 (0 is not constrained). We can now
// look 3 characters ahead and if we don't find one of [f, o] (the union of
// [f, o] and [o]) then we can skip forwards by the range size (in this case 2).
//
// For Unicode input strings we do the same, but modulo 128.
//
// We also look at the first string fed to the regexp and use that to get a hint
// of the character frequencies in the inputs. This affects the assessment of
// whether the set of characters is 'reasonably constrained'.
//
// We also have another lookahead mechanism (called quick check in the code),
// which uses a wide load of multiple characters followed by a mask and compare
// to determine whether a match is possible at this point.
enum ContainedInLattice {
kNotYet = 0,
kLatticeIn = 1,
kLatticeOut = 2,
kLatticeUnknown = 3 // Can also mean both in and out.
};
inline ContainedInLattice Combine(ContainedInLattice a, ContainedInLattice b) {
return static_cast<ContainedInLattice>(a | b);
}
class BoyerMoorePositionInfo : public ZoneObject {
public:
bool at(int i) const { return map_[i]; }
static constexpr int kMapSize = 128;
static constexpr int kMask = kMapSize - 1;
int map_count() const { return map_count_; }
void Set(int character);
void SetInterval(const Interval& interval);
void SetAll();
bool is_non_word() { return w_ == kLatticeOut; }
bool is_word() { return w_ == kLatticeIn; }
using Bitset = std::bitset<kMapSize>;
Bitset raw_bitset() const { return map_; }
private:
Bitset map_;
int map_count_ = 0; // Number of set bits in the map.
ContainedInLattice w_ = kNotYet; // The \w character class.
};
class BoyerMooreLookahead : public ZoneObject {
public:
BoyerMooreLookahead(int length, RegExpCompiler* compiler, Zone* zone);
int length() { return length_; }
int max_char() { return max_char_; }
RegExpCompiler* compiler() { return compiler_; }
int Count(int map_number) { return bitmaps_->at(map_number)->map_count(); }
BoyerMoorePositionInfo* at(int i) { return bitmaps_->at(i); }
void Set(int map_number, int character) {
if (character > max_char_) return;
BoyerMoorePositionInfo* info = bitmaps_->at(map_number);
info->Set(character);
}
void SetInterval(int map_number, const Interval& interval) {
if (interval.from() > max_char_) return;
BoyerMoorePositionInfo* info = bitmaps_->at(map_number);
if (interval.to() > max_char_) {
info->SetInterval(Interval(interval.from(), max_char_));
} else {
info->SetInterval(interval);
}
}
void SetAll(int map_number) { bitmaps_->at(map_number)->SetAll(); }
void SetRest(int from_map) {
for (int i = from_map; i < length_; i++) SetAll(i);
}
void EmitSkipInstructions(RegExpMacroAssembler* masm);
private:
// This is the value obtained by EatsAtLeast. If we do not have at least this
// many characters left in the sample string then the match is bound to fail.
// Therefore it is OK to read a character this far ahead of the current match
// point.
int length_;
RegExpCompiler* compiler_;
// 0xff for Latin1, 0xffff for UTF-16.
int max_char_;
ZoneList<BoyerMoorePositionInfo*>* bitmaps_;
int GetSkipTable(int min_lookahead, int max_lookahead,
Handle<ByteArray> boolean_skip_table);
bool FindWorthwhileInterval(int* from, int* to);
int FindBestInterval(int max_number_of_chars, int old_biggest_points,
int* from, int* to);
};
// There are many ways to generate code for a node. This class encapsulates
// the current way we should be generating. In other words it encapsulates
// the current state of the code generator. The effect of this is that we
// generate code for paths that the matcher can take through the regular
// expression. A given node in the regexp can be code-generated several times
// as it can be part of several traces. For example for the regexp:
// /foo(bar|ip)baz/ the code to match baz will be generated twice, once as part
// of the foo-bar-baz trace and once as part of the foo-ip-baz trace. The code
// to match foo is generated only once (the traces have a common prefix). The
// code to store the capture is deferred and generated (twice) after the places
// where baz has been matched.
class Trace {
public:
// A value for a property that is either known to be true, know to be false,
// or not known.
enum TriBool { UNKNOWN = -1, FALSE_VALUE = 0, TRUE_VALUE = 1 };
class DeferredAction {
public:
DeferredAction(ActionNode::ActionType action_type, int reg)
: action_type_(action_type), reg_(reg), next_(nullptr) {}
DeferredAction* next() { return next_; }
bool Mentions(int reg);
int reg() { return reg_; }
ActionNode::ActionType action_type() { return action_type_; }
private:
ActionNode::ActionType action_type_;
int reg_;
DeferredAction* next_;
friend class Trace;
};
class DeferredCapture : public DeferredAction {
public:
DeferredCapture(int reg, bool is_capture, Trace* trace)
: DeferredAction(ActionNode::STORE_POSITION, reg),
cp_offset_(trace->cp_offset()),
is_capture_(is_capture) {}
int cp_offset() { return cp_offset_; }
bool is_capture() { return is_capture_; }
private:
int cp_offset_;
bool is_capture_;
void set_cp_offset(int cp_offset) { cp_offset_ = cp_offset; }
};
class DeferredSetRegisterForLoop : public DeferredAction {
public:
DeferredSetRegisterForLoop(int reg, int value)
: DeferredAction(ActionNode::SET_REGISTER_FOR_LOOP, reg),
value_(value) {}
int value() { return value_; }
private:
int value_;
};
class DeferredClearCaptures : public DeferredAction {
public:
explicit DeferredClearCaptures(Interval range)
: DeferredAction(ActionNode::CLEAR_CAPTURES, -1), range_(range) {}
Interval range() { return range_; }
private:
Interval range_;
};
class DeferredIncrementRegister : public DeferredAction {
public:
explicit DeferredIncrementRegister(int reg)
: DeferredAction(ActionNode::INCREMENT_REGISTER, reg) {}
};
Trace()
: cp_offset_(0),
actions_(nullptr),
backtrack_(nullptr),
stop_node_(nullptr),
loop_label_(nullptr),
characters_preloaded_(0),
bound_checked_up_to_(0),
flush_budget_(100),
at_start_(UNKNOWN) {}
// End the trace. This involves flushing the deferred actions in the trace
// and pushing a backtrack location onto the backtrack stack. Once this is
// done we can start a new trace or go to one that has already been
// generated.
void Flush(RegExpCompiler* compiler, RegExpNode* successor);
int cp_offset() { return cp_offset_; }
DeferredAction* actions() { return actions_; }
// A trivial trace is one that has no deferred actions or other state that
// affects the assumptions used when generating code. There is no recorded
// backtrack location in a trivial trace, so with a trivial trace we will
// generate code that, on a failure to match, gets the backtrack location
// from the backtrack stack rather than using a direct jump instruction. We
// always start code generation with a trivial trace and non-trivial traces
// are created as we emit code for nodes or add to the list of deferred
// actions in the trace. The location of the code generated for a node using
// a trivial trace is recorded in a label in the node so that gotos can be
// generated to that code.
bool is_trivial() {
return backtrack_ == nullptr && actions_ == nullptr && cp_offset_ == 0 &&
characters_preloaded_ == 0 && bound_checked_up_to_ == 0 &&
quick_check_performed_.characters() == 0 && at_start_ == UNKNOWN;
}
TriBool at_start() { return at_start_; }
void set_at_start(TriBool at_start) { at_start_ = at_start; }
Label* backtrack() { return backtrack_; }
Label* loop_label() { return loop_label_; }
RegExpNode* stop_node() { return stop_node_; }
int characters_preloaded() { return characters_preloaded_; }
int bound_checked_up_to() { return bound_checked_up_to_; }
int flush_budget() { return flush_budget_; }
QuickCheckDetails* quick_check_performed() { return &quick_check_performed_; }
bool mentions_reg(int reg);
// Returns true if a deferred position store exists to the specified
// register and stores the offset in the out-parameter. Otherwise
// returns false.
bool GetStoredPosition(int reg, int* cp_offset);
// These set methods and AdvanceCurrentPositionInTrace should be used only on
// new traces - the intention is that traces are immutable after creation.
void add_action(DeferredAction* new_action) {
DCHECK(new_action->next_ == nullptr);
new_action->next_ = actions_;
actions_ = new_action;
}
void set_backtrack(Label* backtrack) { backtrack_ = backtrack; }
void set_stop_node(RegExpNode* node) { stop_node_ = node; }
void set_loop_label(Label* label) { loop_label_ = label; }
void set_characters_preloaded(int count) { characters_preloaded_ = count; }
void set_bound_checked_up_to(int to) { bound_checked_up_to_ = to; }
void set_flush_budget(int to) { flush_budget_ = to; }
void set_quick_check_performed(QuickCheckDetails* d) {
quick_check_performed_ = *d;
}
void InvalidateCurrentCharacter();
void AdvanceCurrentPositionInTrace(int by, RegExpCompiler* compiler);
private:
int FindAffectedRegisters(DynamicBitSet* affected_registers, Zone* zone);
void PerformDeferredActions(RegExpMacroAssembler* macro, int max_register,
const DynamicBitSet& affected_registers,
DynamicBitSet* registers_to_pop,
DynamicBitSet* registers_to_clear, Zone* zone);
void RestoreAffectedRegisters(RegExpMacroAssembler* macro, int max_register,
const DynamicBitSet& registers_to_pop,
const DynamicBitSet& registers_to_clear);
int cp_offset_;
DeferredAction* actions_;
Label* backtrack_;
RegExpNode* stop_node_;
Label* loop_label_;
int characters_preloaded_;
int bound_checked_up_to_;
QuickCheckDetails quick_check_performed_;
int flush_budget_;
TriBool at_start_;
};
class GreedyLoopState {
public:
explicit GreedyLoopState(bool not_at_start);
Label* label() { return &label_; }
Trace* counter_backtrack_trace() { return &counter_backtrack_trace_; }
private:
Label label_;
Trace counter_backtrack_trace_;
};
struct PreloadState {
static const int kEatsAtLeastNotYetInitialized = -1;
bool preload_is_current_;
bool preload_has_checked_bounds_;
int preload_characters_;
int eats_at_least_;
void init() { eats_at_least_ = kEatsAtLeastNotYetInitialized; }
};
// Analysis performs assertion propagation and computes eats_at_least_ values.
// See the comments on AssertionPropagator and EatsAtLeastPropagator for more
// details.
RegExpError AnalyzeRegExp(Isolate* isolate, bool is_one_byte, RegExpNode* node);
class FrequencyCollator {
public:
FrequencyCollator() : total_samples_(0) {
for (int i = 0; i < RegExpMacroAssembler::kTableSize; i++) {
frequencies_[i] = CharacterFrequency(i);
}
}
void CountCharacter(int character) {
int index = (character & RegExpMacroAssembler::kTableMask);
frequencies_[index].Increment();
total_samples_++;
}
// Does not measure in percent, but rather per-128 (the table size from the
// regexp macro assembler).
int Frequency(int in_character) {
DCHECK((in_character & RegExpMacroAssembler::kTableMask) == in_character);
if (total_samples_ < 1) return 1; // Division by zero.
int freq_in_per128 =
(frequencies_[in_character].counter() * 128) / total_samples_;
return freq_in_per128;
}
private:
class CharacterFrequency {
public:
CharacterFrequency() : counter_(0), character_(-1) {}
explicit CharacterFrequency(int character)
: counter_(0), character_(character) {}
void Increment() { counter_++; }
int counter() { return counter_; }
int character() { return character_; }
private:
int counter_;
int character_;
};
private:
CharacterFrequency frequencies_[RegExpMacroAssembler::kTableSize];
int total_samples_;
};
class RegExpCompiler {
public:
RegExpCompiler(Isolate* isolate, Zone* zone, int capture_count,
bool is_one_byte);
int AllocateRegister() {
if (next_register_ >= RegExpMacroAssembler::kMaxRegister) {
reg_exp_too_big_ = true;
return next_register_;
}
return next_register_++;
}
// Lookarounds to match lone surrogates for unicode character class matches
// are never nested. We can therefore reuse registers.
int UnicodeLookaroundStackRegister() {
if (unicode_lookaround_stack_register_ == kNoRegister) {
unicode_lookaround_stack_register_ = AllocateRegister();
}
return unicode_lookaround_stack_register_;
}
int UnicodeLookaroundPositionRegister() {
if (unicode_lookaround_position_register_ == kNoRegister) {
unicode_lookaround_position_register_ = AllocateRegister();
}
return unicode_lookaround_position_register_;
}
struct CompilationResult final {
explicit CompilationResult(RegExpError err) : error(err) {}
CompilationResult(Handle<Object> code, int registers)
: code(code), num_registers(registers) {}
static CompilationResult RegExpTooBig() {
return CompilationResult(RegExpError::kTooLarge);
}
bool Succeeded() const { return error == RegExpError::kNone; }
const RegExpError error = RegExpError::kNone;
Handle<Object> code;
int num_registers = 0;
};
CompilationResult Assemble(Isolate* isolate, RegExpMacroAssembler* assembler,
RegExpNode* start, int capture_count,
Handle<String> pattern);
// Preprocessing is the final step of node creation before analysis
// and assembly. It includes:
// - Wrapping the body of the regexp in capture 0.
// - Inserting the implicit .* before/after the regexp if necessary.
// - If the input is a one-byte string, filtering out nodes that can't match.
// - Fixing up regexp matches that start within a surrogate pair.
RegExpNode* PreprocessRegExp(RegExpCompileData* data, JSRegExp::Flags flags,
bool is_one_byte);
// If the regexp matching starts within a surrogate pair, step back to the
// lead surrogate and start matching from there.
RegExpNode* OptionallyStepBackToLeadSurrogate(RegExpNode* on_success,
JSRegExp::Flags flags);
inline void AddWork(RegExpNode* node) {
if (!node->on_work_list() && !node->label()->is_bound()) {
node->set_on_work_list(true);
work_list_->push_back(node);
}
}
static const int kImplementationOffset = 0;
static const int kNumberOfRegistersOffset = 0;
static const int kCodeOffset = 1;
RegExpMacroAssembler* macro_assembler() { return macro_assembler_; }
EndNode* accept() { return accept_; }
static const int kMaxRecursion = 100;
inline int recursion_depth() { return recursion_depth_; }
inline void IncrementRecursionDepth() { recursion_depth_++; }
inline void DecrementRecursionDepth() { recursion_depth_--; }
void SetRegExpTooBig() { reg_exp_too_big_ = true; }
inline bool one_byte() { return one_byte_; }
inline bool optimize() { return optimize_; }
inline void set_optimize(bool value) { optimize_ = value; }
inline bool limiting_recursion() { return limiting_recursion_; }
inline void set_limiting_recursion(bool value) {
limiting_recursion_ = value;
}
bool read_backward() { return read_backward_; }
void set_read_backward(bool value) { read_backward_ = value; }
FrequencyCollator* frequency_collator() { return &frequency_collator_; }
int current_expansion_factor() { return current_expansion_factor_; }
void set_current_expansion_factor(int value) {
current_expansion_factor_ = value;
}
Isolate* isolate() const { return isolate_; }
Zone* zone() const { return zone_; }
static const int kNoRegister = -1;
private:
EndNode* accept_;
int next_register_;
int unicode_lookaround_stack_register_;
int unicode_lookaround_position_register_;
ZoneVector<RegExpNode*>* work_list_;
int recursion_depth_;
RegExpMacroAssembler* macro_assembler_;
bool one_byte_;
bool reg_exp_too_big_;
bool limiting_recursion_;
bool optimize_;
bool read_backward_;
int current_expansion_factor_;
FrequencyCollator frequency_collator_;
Isolate* isolate_;
Zone* zone_;
};
// Categorizes character ranges into BMP, non-BMP, lead, and trail surrogates.
class UnicodeRangeSplitter {
public:
V8_EXPORT_PRIVATE UnicodeRangeSplitter(ZoneList<CharacterRange>* base);
static constexpr int kInitialSize = 8;
using CharacterRangeVector = base::SmallVector<CharacterRange, kInitialSize>;
const CharacterRangeVector* bmp() const { return &bmp_; }
const CharacterRangeVector* lead_surrogates() const {
return &lead_surrogates_;
}
const CharacterRangeVector* trail_surrogates() const {
return &trail_surrogates_;
}
const CharacterRangeVector* non_bmp() const { return &non_bmp_; }
private:
void AddRange(CharacterRange range);
CharacterRangeVector bmp_;
CharacterRangeVector lead_surrogates_;
CharacterRangeVector trail_surrogates_;
CharacterRangeVector non_bmp_;
};
// We need to check for the following characters: 0x39C 0x3BC 0x178.
// TODO(jgruber): Move to CharacterRange.
bool RangeContainsLatin1Equivalents(CharacterRange range);
} // namespace internal
} // namespace v8
#endif // V8_REGEXP_REGEXP_COMPILER_H_