| // Copyright 2018 The Abseil Authors. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // https://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| // An open-addressing |
| // hashtable with quadratic probing. |
| // |
| // This is a low level hashtable on top of which different interfaces can be |
| // implemented, like flat_hash_set, node_hash_set, string_hash_set, etc. |
| // |
| // The table interface is similar to that of std::unordered_set. Notable |
| // differences are that most member functions support heterogeneous keys when |
| // BOTH the hash and eq functions are marked as transparent. They do so by |
| // providing a typedef called `is_transparent`. |
| // |
| // When heterogeneous lookup is enabled, functions that take key_type act as if |
| // they have an overload set like: |
| // |
| // iterator find(const key_type& key); |
| // template <class K> |
| // iterator find(const K& key); |
| // |
| // size_type erase(const key_type& key); |
| // template <class K> |
| // size_type erase(const K& key); |
| // |
| // std::pair<iterator, iterator> equal_range(const key_type& key); |
| // template <class K> |
| // std::pair<iterator, iterator> equal_range(const K& key); |
| // |
| // When heterogeneous lookup is disabled, only the explicit `key_type` overloads |
| // exist. |
| // |
| // find() also supports passing the hash explicitly: |
| // |
| // iterator find(const key_type& key, size_t hash); |
| // template <class U> |
| // iterator find(const U& key, size_t hash); |
| // |
| // In addition the pointer to element and iterator stability guarantees are |
| // weaker: all iterators and pointers are invalidated after a new element is |
| // inserted. |
| // |
| // IMPLEMENTATION DETAILS |
| // |
| // # Table Layout |
| // |
| // A raw_hash_set's backing array consists of control bytes followed by slots |
| // that may or may not contain objects. |
| // |
| // The layout of the backing array, for `capacity` slots, is thus, as a |
| // pseudo-struct: |
| // |
| // struct BackingArray { |
| // // Control bytes for the "real" slots. |
| // ctrl_t ctrl[capacity]; |
| // // Always `ctrl_t::kSentinel`. This is used by iterators to find when to |
| // // stop and serves no other purpose. |
| // ctrl_t sentinel; |
| // // A copy of the first `kWidth - 1` elements of `ctrl`. This is used so |
| // // that if a probe sequence picks a value near the end of `ctrl`, |
| // // `Group` will have valid control bytes to look at. |
| // ctrl_t clones[kWidth - 1]; |
| // // The actual slot data. |
| // slot_type slots[capacity]; |
| // }; |
| // |
| // The length of this array is computed by `AllocSize()` below. |
| // |
| // Control bytes (`ctrl_t`) are bytes (collected into groups of a |
| // platform-specific size) that define the state of the corresponding slot in |
| // the slot array. Group manipulation is tightly optimized to be as efficient |
| // as possible: SSE and friends on x86, clever bit operations on other arches. |
| // |
| // Group 1 Group 2 Group 3 |
| // +---------------+---------------+---------------+ |
| // | | | | | | | | | | | | | | | | | | | | | | | | | |
| // +---------------+---------------+---------------+ |
| // |
| // Each control byte is either a special value for empty slots, deleted slots |
| // (sometimes called *tombstones*), and a special end-of-table marker used by |
| // iterators, or, if occupied, seven bits (H2) from the hash of the value in the |
| // corresponding slot. |
| // |
| // Storing control bytes in a separate array also has beneficial cache effects, |
| // since more logical slots will fit into a cache line. |
| // |
| // # Hashing |
| // |
| // We compute two separate hashes, `H1` and `H2`, from the hash of an object. |
| // `H1(hash(x))` is an index into `slots`, and essentially the starting point |
| // for the probe sequence. `H2(hash(x))` is a 7-bit value used to filter out |
| // objects that cannot possibly be the one we are looking for. |
| // |
| // # Table operations. |
| // |
| // The key operations are `insert`, `find`, and `erase`. |
| // |
| // Since `insert` and `erase` are implemented in terms of `find`, we describe |
| // `find` first. To `find` a value `x`, we compute `hash(x)`. From |
| // `H1(hash(x))` and the capacity, we construct a `probe_seq` that visits every |
| // group of slots in some interesting order. |
| // |
| // We now walk through these indices. At each index, we select the entire group |
| // starting with that index and extract potential candidates: occupied slots |
| // with a control byte equal to `H2(hash(x))`. If we find an empty slot in the |
| // group, we stop and return an error. Each candidate slot `y` is compared with |
| // `x`; if `x == y`, we are done and return `&y`; otherwise we contine to the |
| // next probe index. Tombstones effectively behave like full slots that never |
| // match the value we're looking for. |
| // |
| // The `H2` bits ensure when we compare a slot to an object with `==`, we are |
| // likely to have actually found the object. That is, the chance is low that |
| // `==` is called and returns `false`. Thus, when we search for an object, we |
| // are unlikely to call `==` many times. This likelyhood can be analyzed as |
| // follows (assuming that H2 is a random enough hash function). |
| // |
| // Let's assume that there are `k` "wrong" objects that must be examined in a |
| // probe sequence. For example, when doing a `find` on an object that is in the |
| // table, `k` is the number of objects between the start of the probe sequence |
| // and the final found object (not including the final found object). The |
| // expected number of objects with an H2 match is then `k/128`. Measurements |
| // and analysis indicate that even at high load factors, `k` is less than 32, |
| // meaning that the number of "false positive" comparisons we must perform is |
| // less than 1/8 per `find`. |
| |
| // `insert` is implemented in terms of `unchecked_insert`, which inserts a |
| // value presumed to not be in the table (violating this requirement will cause |
| // the table to behave erratically). Given `x` and its hash `hash(x)`, to insert |
| // it, we construct a `probe_seq` once again, and use it to find the first |
| // group with an unoccupied (empty *or* deleted) slot. We place `x` into the |
| // first such slot in the group and mark it as full with `x`'s H2. |
| // |
| // To `insert`, we compose `unchecked_insert` with `find`. We compute `h(x)` and |
| // perform a `find` to see if it's already present; if it is, we're done. If |
| // it's not, we may decide the table is getting overcrowded (i.e. the load |
| // factor is greater than 7/8 for big tables; `is_small()` tables use a max load |
| // factor of 1); in this case, we allocate a bigger array, `unchecked_insert` |
| // each element of the table into the new array (we know that no insertion here |
| // will insert an already-present value), and discard the old backing array. At |
| // this point, we may `unchecked_insert` the value `x`. |
| // |
| // Below, `unchecked_insert` is partly implemented by `prepare_insert`, which |
| // presents a viable, initialized slot pointee to the caller. |
| // |
| // `erase` is implemented in terms of `erase_at`, which takes an index to a |
| // slot. Given an offset, we simply create a tombstone and destroy its contents. |
| // If we can prove that the slot would not appear in a probe sequence, we can |
| // make the slot as empty, instead. We can prove this by observing that if a |
| // group has any empty slots, it has never been full (assuming we never create |
| // an empty slot in a group with no empties, which this heuristic guarantees we |
| // never do) and find would stop at this group anyways (since it does not probe |
| // beyond groups with empties). |
| // |
| // `erase` is `erase_at` composed with `find`: if we |
| // have a value `x`, we can perform a `find`, and then `erase_at` the resulting |
| // slot. |
| // |
| // To iterate, we simply traverse the array, skipping empty and deleted slots |
| // and stopping when we hit a `kSentinel`. |
| |
| #ifndef ABSL_CONTAINER_INTERNAL_RAW_HASH_SET_H_ |
| #define ABSL_CONTAINER_INTERNAL_RAW_HASH_SET_H_ |
| |
| #include <algorithm> |
| #include <cmath> |
| #include <cstdint> |
| #include <cstring> |
| #include <iterator> |
| #include <limits> |
| #include <memory> |
| #include <string> |
| #include <tuple> |
| #include <type_traits> |
| #include <utility> |
| |
| #include "absl/base/config.h" |
| #include "absl/base/internal/endian.h" |
| #include "absl/base/internal/raw_logging.h" |
| #include "absl/base/optimization.h" |
| #include "absl/base/port.h" |
| #include "absl/base/prefetch.h" |
| #include "absl/container/internal/common.h" |
| #include "absl/container/internal/compressed_tuple.h" |
| #include "absl/container/internal/container_memory.h" |
| #include "absl/container/internal/hash_policy_traits.h" |
| #include "absl/container/internal/hashtable_debug_hooks.h" |
| #include "absl/container/internal/hashtablez_sampler.h" |
| #include "absl/memory/memory.h" |
| #include "absl/meta/type_traits.h" |
| #include "absl/numeric/bits.h" |
| #include "absl/utility/utility.h" |
| |
| #ifdef ABSL_INTERNAL_HAVE_SSE2 |
| #include <emmintrin.h> |
| #endif |
| |
| #ifdef ABSL_INTERNAL_HAVE_SSSE3 |
| #include <tmmintrin.h> |
| #endif |
| |
| #ifdef _MSC_VER |
| #include <intrin.h> |
| #endif |
| |
| #ifdef ABSL_INTERNAL_HAVE_ARM_NEON |
| #include <arm_neon.h> |
| #endif |
| |
| namespace absl { |
| ABSL_NAMESPACE_BEGIN |
| namespace container_internal { |
| |
| #ifdef ABSL_SWISSTABLE_ENABLE_GENERATIONS |
| #error ABSL_SWISSTABLE_ENABLE_GENERATIONS cannot be directly set |
| #elif defined(ABSL_HAVE_ADDRESS_SANITIZER) || \ |
| defined(ABSL_HAVE_MEMORY_SANITIZER) |
| // When compiled in sanitizer mode, we add generation integers to the backing |
| // array and iterators. In the backing array, we store the generation between |
| // the control bytes and the slots. When iterators are dereferenced, we assert |
| // that the container has not been mutated in a way that could cause iterator |
| // invalidation since the iterator was initialized. |
| #define ABSL_SWISSTABLE_ENABLE_GENERATIONS |
| #endif |
| |
| // We use uint8_t so we don't need to worry about padding. |
| using GenerationType = uint8_t; |
| |
| // A sentinel value for empty generations. Using 0 makes it easy to constexpr |
| // initialize an array of this value. |
| constexpr GenerationType SentinelEmptyGeneration() { return 0; } |
| |
| constexpr GenerationType NextGeneration(GenerationType generation) { |
| return ++generation == SentinelEmptyGeneration() ? ++generation : generation; |
| } |
| |
| #ifdef ABSL_SWISSTABLE_ENABLE_GENERATIONS |
| constexpr bool SwisstableGenerationsEnabled() { return true; } |
| constexpr size_t NumGenerationBytes() { return sizeof(GenerationType); } |
| #else |
| constexpr bool SwisstableGenerationsEnabled() { return false; } |
| constexpr size_t NumGenerationBytes() { return 0; } |
| #endif |
| |
| template <typename AllocType> |
| void SwapAlloc(AllocType& lhs, AllocType& rhs, |
| std::true_type /* propagate_on_container_swap */) { |
| using std::swap; |
| swap(lhs, rhs); |
| } |
| template <typename AllocType> |
| void SwapAlloc(AllocType& /*lhs*/, AllocType& /*rhs*/, |
| std::false_type /* propagate_on_container_swap */) {} |
| |
| // The state for a probe sequence. |
| // |
| // Currently, the sequence is a triangular progression of the form |
| // |
| // p(i) := Width * (i^2 + i)/2 + hash (mod mask + 1) |
| // |
| // The use of `Width` ensures that each probe step does not overlap groups; |
| // the sequence effectively outputs the addresses of *groups* (although not |
| // necessarily aligned to any boundary). The `Group` machinery allows us |
| // to check an entire group with minimal branching. |
| // |
| // Wrapping around at `mask + 1` is important, but not for the obvious reason. |
| // As described above, the first few entries of the control byte array |
| // are mirrored at the end of the array, which `Group` will find and use |
| // for selecting candidates. However, when those candidates' slots are |
| // actually inspected, there are no corresponding slots for the cloned bytes, |
| // so we need to make sure we've treated those offsets as "wrapping around". |
| // |
| // It turns out that this probe sequence visits every group exactly once if the |
| // number of groups is a power of two, since (i^2+i)/2 is a bijection in |
| // Z/(2^m). See https://en.wikipedia.org/wiki/Quadratic_probing |
| template <size_t Width> |
| class probe_seq { |
| public: |
| // Creates a new probe sequence using `hash` as the initial value of the |
| // sequence and `mask` (usually the capacity of the table) as the mask to |
| // apply to each value in the progression. |
| probe_seq(size_t hash, size_t mask) { |
| assert(((mask + 1) & mask) == 0 && "not a mask"); |
| mask_ = mask; |
| offset_ = hash & mask_; |
| } |
| |
| // The offset within the table, i.e., the value `p(i)` above. |
| size_t offset() const { return offset_; } |
| size_t offset(size_t i) const { return (offset_ + i) & mask_; } |
| |
| void next() { |
| index_ += Width; |
| offset_ += index_; |
| offset_ &= mask_; |
| } |
| // 0-based probe index, a multiple of `Width`. |
| size_t index() const { return index_; } |
| |
| private: |
| size_t mask_; |
| size_t offset_; |
| size_t index_ = 0; |
| }; |
| |
| template <class ContainerKey, class Hash, class Eq> |
| struct RequireUsableKey { |
| template <class PassedKey, class... Args> |
| std::pair< |
| decltype(std::declval<const Hash&>()(std::declval<const PassedKey&>())), |
| decltype(std::declval<const Eq&>()(std::declval<const ContainerKey&>(), |
| std::declval<const PassedKey&>()))>* |
| operator()(const PassedKey&, const Args&...) const; |
| }; |
| |
| template <class E, class Policy, class Hash, class Eq, class... Ts> |
| struct IsDecomposable : std::false_type {}; |
| |
| template <class Policy, class Hash, class Eq, class... Ts> |
| struct IsDecomposable< |
| absl::void_t<decltype(Policy::apply( |
| RequireUsableKey<typename Policy::key_type, Hash, Eq>(), |
| std::declval<Ts>()...))>, |
| Policy, Hash, Eq, Ts...> : std::true_type {}; |
| |
| // TODO(alkis): Switch to std::is_nothrow_swappable when gcc/clang supports it. |
| template <class T> |
| constexpr bool IsNoThrowSwappable(std::true_type = {} /* is_swappable */) { |
| using std::swap; |
| return noexcept(swap(std::declval<T&>(), std::declval<T&>())); |
| } |
| template <class T> |
| constexpr bool IsNoThrowSwappable(std::false_type /* is_swappable */) { |
| return false; |
| } |
| |
| template <typename T> |
| uint32_t TrailingZeros(T x) { |
| ABSL_ASSUME(x != 0); |
| return static_cast<uint32_t>(countr_zero(x)); |
| } |
| |
| // An abstract bitmask, such as that emitted by a SIMD instruction. |
| // |
| // Specifically, this type implements a simple bitset whose representation is |
| // controlled by `SignificantBits` and `Shift`. `SignificantBits` is the number |
| // of abstract bits in the bitset, while `Shift` is the log-base-two of the |
| // width of an abstract bit in the representation. |
| // This mask provides operations for any number of real bits set in an abstract |
| // bit. To add iteration on top of that, implementation must guarantee no more |
| // than one real bit is set in an abstract bit. |
| template <class T, int SignificantBits, int Shift = 0> |
| class NonIterableBitMask { |
| public: |
| explicit NonIterableBitMask(T mask) : mask_(mask) {} |
| |
| explicit operator bool() const { return this->mask_ != 0; } |
| |
| // Returns the index of the lowest *abstract* bit set in `self`. |
| uint32_t LowestBitSet() const { |
| return container_internal::TrailingZeros(mask_) >> Shift; |
| } |
| |
| // Returns the index of the highest *abstract* bit set in `self`. |
| uint32_t HighestBitSet() const { |
| return static_cast<uint32_t>((bit_width(mask_) - 1) >> Shift); |
| } |
| |
| // Return the number of trailing zero *abstract* bits. |
| uint32_t TrailingZeros() const { |
| return container_internal::TrailingZeros(mask_) >> Shift; |
| } |
| |
| // Return the number of leading zero *abstract* bits. |
| uint32_t LeadingZeros() const { |
| constexpr int total_significant_bits = SignificantBits << Shift; |
| constexpr int extra_bits = sizeof(T) * 8 - total_significant_bits; |
| return static_cast<uint32_t>(countl_zero(mask_ << extra_bits)) >> Shift; |
| } |
| |
| T mask_; |
| }; |
| |
| // Mask that can be iterable |
| // |
| // For example, when `SignificantBits` is 16 and `Shift` is zero, this is just |
| // an ordinary 16-bit bitset occupying the low 16 bits of `mask`. When |
| // `SignificantBits` is 8 and `Shift` is 3, abstract bits are represented as |
| // the bytes `0x00` and `0x80`, and it occupies all 64 bits of the bitmask. |
| // |
| // For example: |
| // for (int i : BitMask<uint32_t, 16>(0b101)) -> yields 0, 2 |
| // for (int i : BitMask<uint64_t, 8, 3>(0x0000000080800000)) -> yields 2, 3 |
| template <class T, int SignificantBits, int Shift = 0> |
| class BitMask : public NonIterableBitMask<T, SignificantBits, Shift> { |
| using Base = NonIterableBitMask<T, SignificantBits, Shift>; |
| static_assert(std::is_unsigned<T>::value, ""); |
| static_assert(Shift == 0 || Shift == 3, ""); |
| |
| public: |
| explicit BitMask(T mask) : Base(mask) {} |
| // BitMask is an iterator over the indices of its abstract bits. |
| using value_type = int; |
| using iterator = BitMask; |
| using const_iterator = BitMask; |
| |
| BitMask& operator++() { |
| this->mask_ &= (this->mask_ - 1); |
| return *this; |
| } |
| |
| uint32_t operator*() const { return Base::LowestBitSet(); } |
| |
| BitMask begin() const { return *this; } |
| BitMask end() const { return BitMask(0); } |
| |
| private: |
| friend bool operator==(const BitMask& a, const BitMask& b) { |
| return a.mask_ == b.mask_; |
| } |
| friend bool operator!=(const BitMask& a, const BitMask& b) { |
| return a.mask_ != b.mask_; |
| } |
| }; |
| |
| using h2_t = uint8_t; |
| |
| // The values here are selected for maximum performance. See the static asserts |
| // below for details. |
| |
| // A `ctrl_t` is a single control byte, which can have one of four |
| // states: empty, deleted, full (which has an associated seven-bit h2_t value) |
| // and the sentinel. They have the following bit patterns: |
| // |
| // empty: 1 0 0 0 0 0 0 0 |
| // deleted: 1 1 1 1 1 1 1 0 |
| // full: 0 h h h h h h h // h represents the hash bits. |
| // sentinel: 1 1 1 1 1 1 1 1 |
| // |
| // These values are specifically tuned for SSE-flavored SIMD. |
| // The static_asserts below detail the source of these choices. |
| // |
| // We use an enum class so that when strict aliasing is enabled, the compiler |
| // knows ctrl_t doesn't alias other types. |
| enum class ctrl_t : int8_t { |
| kEmpty = -128, // 0b10000000 |
| kDeleted = -2, // 0b11111110 |
| kSentinel = -1, // 0b11111111 |
| }; |
| static_assert( |
| (static_cast<int8_t>(ctrl_t::kEmpty) & |
| static_cast<int8_t>(ctrl_t::kDeleted) & |
| static_cast<int8_t>(ctrl_t::kSentinel) & 0x80) != 0, |
| "Special markers need to have the MSB to make checking for them efficient"); |
| static_assert( |
| ctrl_t::kEmpty < ctrl_t::kSentinel && ctrl_t::kDeleted < ctrl_t::kSentinel, |
| "ctrl_t::kEmpty and ctrl_t::kDeleted must be smaller than " |
| "ctrl_t::kSentinel to make the SIMD test of IsEmptyOrDeleted() efficient"); |
| static_assert( |
| ctrl_t::kSentinel == static_cast<ctrl_t>(-1), |
| "ctrl_t::kSentinel must be -1 to elide loading it from memory into SIMD " |
| "registers (pcmpeqd xmm, xmm)"); |
| static_assert(ctrl_t::kEmpty == static_cast<ctrl_t>(-128), |
| "ctrl_t::kEmpty must be -128 to make the SIMD check for its " |
| "existence efficient (psignb xmm, xmm)"); |
| static_assert( |
| (~static_cast<int8_t>(ctrl_t::kEmpty) & |
| ~static_cast<int8_t>(ctrl_t::kDeleted) & |
| static_cast<int8_t>(ctrl_t::kSentinel) & 0x7F) != 0, |
| "ctrl_t::kEmpty and ctrl_t::kDeleted must share an unset bit that is not " |
| "shared by ctrl_t::kSentinel to make the scalar test for " |
| "MaskEmptyOrDeleted() efficient"); |
| static_assert(ctrl_t::kDeleted == static_cast<ctrl_t>(-2), |
| "ctrl_t::kDeleted must be -2 to make the implementation of " |
| "ConvertSpecialToEmptyAndFullToDeleted efficient"); |
| |
| ABSL_DLL extern const ctrl_t kEmptyGroup[16]; |
| |
| // Returns a pointer to a control byte group that can be used by empty tables. |
| inline ctrl_t* EmptyGroup() { |
| // Const must be cast away here; no uses of this function will actually write |
| // to it, because it is only used for empty tables. |
| return const_cast<ctrl_t*>(kEmptyGroup); |
| } |
| |
| // Returns a pointer to a generation to use for an empty hashtable. |
| GenerationType* EmptyGeneration(); |
| |
| // Returns whether `generation` is a generation for an empty hashtable that |
| // could be returned by EmptyGeneration(). |
| inline bool IsEmptyGeneration(const GenerationType* generation) { |
| return *generation == SentinelEmptyGeneration(); |
| } |
| |
| // Mixes a randomly generated per-process seed with `hash` and `ctrl` to |
| // randomize insertion order within groups. |
| bool ShouldInsertBackwards(size_t hash, const ctrl_t* ctrl); |
| |
| // Returns a per-table, hash salt, which changes on resize. This gets mixed into |
| // H1 to randomize iteration order per-table. |
| // |
| // The seed consists of the ctrl_ pointer, which adds enough entropy to ensure |
| // non-determinism of iteration order in most cases. |
| inline size_t PerTableSalt(const ctrl_t* ctrl) { |
| // The low bits of the pointer have little or no entropy because of |
| // alignment. We shift the pointer to try to use higher entropy bits. A |
| // good number seems to be 12 bits, because that aligns with page size. |
| return reinterpret_cast<uintptr_t>(ctrl) >> 12; |
| } |
| // Extracts the H1 portion of a hash: 57 bits mixed with a per-table salt. |
| inline size_t H1(size_t hash, const ctrl_t* ctrl) { |
| return (hash >> 7) ^ PerTableSalt(ctrl); |
| } |
| |
| // Extracts the H2 portion of a hash: the 7 bits not used for H1. |
| // |
| // These are used as an occupied control byte. |
| inline h2_t H2(size_t hash) { return hash & 0x7F; } |
| |
| // Helpers for checking the state of a control byte. |
| inline bool IsEmpty(ctrl_t c) { return c == ctrl_t::kEmpty; } |
| inline bool IsFull(ctrl_t c) { return c >= static_cast<ctrl_t>(0); } |
| inline bool IsDeleted(ctrl_t c) { return c == ctrl_t::kDeleted; } |
| inline bool IsEmptyOrDeleted(ctrl_t c) { return c < ctrl_t::kSentinel; } |
| |
| #ifdef ABSL_INTERNAL_HAVE_SSE2 |
| // Quick reference guide for intrinsics used below: |
| // |
| // * __m128i: An XMM (128-bit) word. |
| // |
| // * _mm_setzero_si128: Returns a zero vector. |
| // * _mm_set1_epi8: Returns a vector with the same i8 in each lane. |
| // |
| // * _mm_subs_epi8: Saturating-subtracts two i8 vectors. |
| // * _mm_and_si128: Ands two i128s together. |
| // * _mm_or_si128: Ors two i128s together. |
| // * _mm_andnot_si128: And-nots two i128s together. |
| // |
| // * _mm_cmpeq_epi8: Component-wise compares two i8 vectors for equality, |
| // filling each lane with 0x00 or 0xff. |
| // * _mm_cmpgt_epi8: Same as above, but using > rather than ==. |
| // |
| // * _mm_loadu_si128: Performs an unaligned load of an i128. |
| // * _mm_storeu_si128: Performs an unaligned store of an i128. |
| // |
| // * _mm_sign_epi8: Retains, negates, or zeroes each i8 lane of the first |
| // argument if the corresponding lane of the second |
| // argument is positive, negative, or zero, respectively. |
| // * _mm_movemask_epi8: Selects the sign bit out of each i8 lane and produces a |
| // bitmask consisting of those bits. |
| // * _mm_shuffle_epi8: Selects i8s from the first argument, using the low |
| // four bits of each i8 lane in the second argument as |
| // indices. |
| |
| // https://github.com/abseil/abseil-cpp/issues/209 |
| // https://gcc.gnu.org/bugzilla/show_bug.cgi?id=87853 |
| // _mm_cmpgt_epi8 is broken under GCC with -funsigned-char |
| // Work around this by using the portable implementation of Group |
| // when using -funsigned-char under GCC. |
| inline __m128i _mm_cmpgt_epi8_fixed(__m128i a, __m128i b) { |
| #if defined(__GNUC__) && !defined(__clang__) |
| if (std::is_unsigned<char>::value) { |
| const __m128i mask = _mm_set1_epi8(0x80); |
| const __m128i diff = _mm_subs_epi8(b, a); |
| return _mm_cmpeq_epi8(_mm_and_si128(diff, mask), mask); |
| } |
| #endif |
| return _mm_cmpgt_epi8(a, b); |
| } |
| |
| struct GroupSse2Impl { |
| static constexpr size_t kWidth = 16; // the number of slots per group |
| |
| explicit GroupSse2Impl(const ctrl_t* pos) { |
| ctrl = _mm_loadu_si128(reinterpret_cast<const __m128i*>(pos)); |
| } |
| |
| // Returns a bitmask representing the positions of slots that match hash. |
| BitMask<uint32_t, kWidth> Match(h2_t hash) const { |
| auto match = _mm_set1_epi8(static_cast<char>(hash)); |
| return BitMask<uint32_t, kWidth>( |
| static_cast<uint32_t>(_mm_movemask_epi8(_mm_cmpeq_epi8(match, ctrl)))); |
| } |
| |
| // Returns a bitmask representing the positions of empty slots. |
| NonIterableBitMask<uint32_t, kWidth> MaskEmpty() const { |
| #ifdef ABSL_INTERNAL_HAVE_SSSE3 |
| // This only works because ctrl_t::kEmpty is -128. |
| return NonIterableBitMask<uint32_t, kWidth>( |
| static_cast<uint32_t>(_mm_movemask_epi8(_mm_sign_epi8(ctrl, ctrl)))); |
| #else |
| auto match = _mm_set1_epi8(static_cast<char>(ctrl_t::kEmpty)); |
| return NonIterableBitMask<uint32_t, kWidth>( |
| static_cast<uint32_t>(_mm_movemask_epi8(_mm_cmpeq_epi8(match, ctrl)))); |
| #endif |
| } |
| |
| // Returns a bitmask representing the positions of empty or deleted slots. |
| NonIterableBitMask<uint32_t, kWidth> MaskEmptyOrDeleted() const { |
| auto special = _mm_set1_epi8(static_cast<char>(ctrl_t::kSentinel)); |
| return NonIterableBitMask<uint32_t, kWidth>(static_cast<uint32_t>( |
| _mm_movemask_epi8(_mm_cmpgt_epi8_fixed(special, ctrl)))); |
| } |
| |
| // Returns the number of trailing empty or deleted elements in the group. |
| uint32_t CountLeadingEmptyOrDeleted() const { |
| auto special = _mm_set1_epi8(static_cast<char>(ctrl_t::kSentinel)); |
| return TrailingZeros(static_cast<uint32_t>( |
| _mm_movemask_epi8(_mm_cmpgt_epi8_fixed(special, ctrl)) + 1)); |
| } |
| |
| void ConvertSpecialToEmptyAndFullToDeleted(ctrl_t* dst) const { |
| auto msbs = _mm_set1_epi8(static_cast<char>(-128)); |
| auto x126 = _mm_set1_epi8(126); |
| #ifdef ABSL_INTERNAL_HAVE_SSSE3 |
| auto res = _mm_or_si128(_mm_shuffle_epi8(x126, ctrl), msbs); |
| #else |
| auto zero = _mm_setzero_si128(); |
| auto special_mask = _mm_cmpgt_epi8_fixed(zero, ctrl); |
| auto res = _mm_or_si128(msbs, _mm_andnot_si128(special_mask, x126)); |
| #endif |
| _mm_storeu_si128(reinterpret_cast<__m128i*>(dst), res); |
| } |
| |
| __m128i ctrl; |
| }; |
| #endif // ABSL_INTERNAL_RAW_HASH_SET_HAVE_SSE2 |
| |
| #if defined(ABSL_INTERNAL_HAVE_ARM_NEON) && defined(ABSL_IS_LITTLE_ENDIAN) |
| struct GroupAArch64Impl { |
| static constexpr size_t kWidth = 8; |
| |
| explicit GroupAArch64Impl(const ctrl_t* pos) { |
| ctrl = vld1_u8(reinterpret_cast<const uint8_t*>(pos)); |
| } |
| |
| BitMask<uint64_t, kWidth, 3> Match(h2_t hash) const { |
| uint8x8_t dup = vdup_n_u8(hash); |
| auto mask = vceq_u8(ctrl, dup); |
| constexpr uint64_t msbs = 0x8080808080808080ULL; |
| return BitMask<uint64_t, kWidth, 3>( |
| vget_lane_u64(vreinterpret_u64_u8(mask), 0) & msbs); |
| } |
| |
| NonIterableBitMask<uint64_t, kWidth, 3> MaskEmpty() const { |
| uint64_t mask = |
| vget_lane_u64(vreinterpret_u64_u8(vceq_s8( |
| vdup_n_s8(static_cast<int8_t>(ctrl_t::kEmpty)), |
| vreinterpret_s8_u8(ctrl))), |
| 0); |
| return NonIterableBitMask<uint64_t, kWidth, 3>(mask); |
| } |
| |
| NonIterableBitMask<uint64_t, kWidth, 3> MaskEmptyOrDeleted() const { |
| uint64_t mask = |
| vget_lane_u64(vreinterpret_u64_u8(vcgt_s8( |
| vdup_n_s8(static_cast<int8_t>(ctrl_t::kSentinel)), |
| vreinterpret_s8_u8(ctrl))), |
| 0); |
| return NonIterableBitMask<uint64_t, kWidth, 3>(mask); |
| } |
| |
| uint32_t CountLeadingEmptyOrDeleted() const { |
| uint64_t mask = |
| vget_lane_u64(vreinterpret_u64_u8(vcle_s8( |
| vdup_n_s8(static_cast<int8_t>(ctrl_t::kSentinel)), |
| vreinterpret_s8_u8(ctrl))), |
| 0); |
| // Similar to MaskEmptyorDeleted() but we invert the logic to invert the |
| // produced bitfield. We then count number of trailing zeros. |
| // Clang and GCC optimize countr_zero to rbit+clz without any check for 0, |
| // so we should be fine. |
| return static_cast<uint32_t>(countr_zero(mask)) >> 3; |
| } |
| |
| void ConvertSpecialToEmptyAndFullToDeleted(ctrl_t* dst) const { |
| uint64_t mask = vget_lane_u64(vreinterpret_u64_u8(ctrl), 0); |
| constexpr uint64_t msbs = 0x8080808080808080ULL; |
| constexpr uint64_t slsbs = 0x0202020202020202ULL; |
| constexpr uint64_t midbs = 0x7e7e7e7e7e7e7e7eULL; |
| auto x = slsbs & (mask >> 6); |
| auto res = (x + midbs) | msbs; |
| little_endian::Store64(dst, res); |
| } |
| |
| uint8x8_t ctrl; |
| }; |
| #endif // ABSL_INTERNAL_HAVE_ARM_NEON && ABSL_IS_LITTLE_ENDIAN |
| |
| struct GroupPortableImpl { |
| static constexpr size_t kWidth = 8; |
| |
| explicit GroupPortableImpl(const ctrl_t* pos) |
| : ctrl(little_endian::Load64(pos)) {} |
| |
| BitMask<uint64_t, kWidth, 3> Match(h2_t hash) const { |
| // For the technique, see: |
| // http://graphics.stanford.edu/~seander/bithacks.html##ValueInWord |
| // (Determine if a word has a byte equal to n). |
| // |
| // Caveat: there are false positives but: |
| // - they only occur if there is a real match |
| // - they never occur on ctrl_t::kEmpty, ctrl_t::kDeleted, ctrl_t::kSentinel |
| // - they will be handled gracefully by subsequent checks in code |
| // |
| // Example: |
| // v = 0x1716151413121110 |
| // hash = 0x12 |
| // retval = (v - lsbs) & ~v & msbs = 0x0000000080800000 |
| constexpr uint64_t msbs = 0x8080808080808080ULL; |
| constexpr uint64_t lsbs = 0x0101010101010101ULL; |
| auto x = ctrl ^ (lsbs * hash); |
| return BitMask<uint64_t, kWidth, 3>((x - lsbs) & ~x & msbs); |
| } |
| |
| NonIterableBitMask<uint64_t, kWidth, 3> MaskEmpty() const { |
| constexpr uint64_t msbs = 0x8080808080808080ULL; |
| return NonIterableBitMask<uint64_t, kWidth, 3>((ctrl & (~ctrl << 6)) & |
| msbs); |
| } |
| |
| NonIterableBitMask<uint64_t, kWidth, 3> MaskEmptyOrDeleted() const { |
| constexpr uint64_t msbs = 0x8080808080808080ULL; |
| return NonIterableBitMask<uint64_t, kWidth, 3>((ctrl & (~ctrl << 7)) & |
| msbs); |
| } |
| |
| uint32_t CountLeadingEmptyOrDeleted() const { |
| // ctrl | ~(ctrl >> 7) will have the lowest bit set to zero for kEmpty and |
| // kDeleted. We lower all other bits and count number of trailing zeros. |
| constexpr uint64_t bits = 0x0101010101010101ULL; |
| return static_cast<uint32_t>(countr_zero((ctrl | ~(ctrl >> 7)) & bits) >> |
| 3); |
| } |
| |
| void ConvertSpecialToEmptyAndFullToDeleted(ctrl_t* dst) const { |
| constexpr uint64_t msbs = 0x8080808080808080ULL; |
| constexpr uint64_t lsbs = 0x0101010101010101ULL; |
| auto x = ctrl & msbs; |
| auto res = (~x + (x >> 7)) & ~lsbs; |
| little_endian::Store64(dst, res); |
| } |
| |
| uint64_t ctrl; |
| }; |
| |
| #ifdef ABSL_INTERNAL_HAVE_SSE2 |
| using Group = GroupSse2Impl; |
| #elif defined(ABSL_INTERNAL_HAVE_ARM_NEON) && defined(ABSL_IS_LITTLE_ENDIAN) |
| using Group = GroupAArch64Impl; |
| #else |
| using Group = GroupPortableImpl; |
| #endif |
| |
| // When there is an insertion with no reserved growth, we rehash with |
| // probability `min(1, RehashProbabilityConstant() / capacity())`. Using a |
| // constant divided by capacity ensures that inserting N elements is still O(N) |
| // in the average case. Using the constant 16 means that we expect to rehash ~8 |
| // times more often than when generations are disabled. We are adding expected |
| // rehash_probability * #insertions/capacity_growth = 16/capacity * ((7/8 - |
| // 7/16) * capacity)/capacity_growth = ~7 extra rehashes per capacity growth. |
| inline size_t RehashProbabilityConstant() { return 16; } |
| |
| class CommonFieldsGenerationInfoEnabled { |
| // A sentinel value for reserved_growth_ indicating that we just ran out of |
| // reserved growth on the last insertion. When reserve is called and then |
| // insertions take place, reserved_growth_'s state machine is N, ..., 1, |
| // kReservedGrowthJustRanOut, 0. |
| static constexpr size_t kReservedGrowthJustRanOut = |
| (std::numeric_limits<size_t>::max)(); |
| |
| public: |
| CommonFieldsGenerationInfoEnabled() = default; |
| CommonFieldsGenerationInfoEnabled(CommonFieldsGenerationInfoEnabled&& that) |
| : reserved_growth_(that.reserved_growth_), generation_(that.generation_) { |
| that.reserved_growth_ = 0; |
| that.generation_ = EmptyGeneration(); |
| } |
| CommonFieldsGenerationInfoEnabled& operator=( |
| CommonFieldsGenerationInfoEnabled&&) = default; |
| |
| // Whether we should rehash on insert in order to detect bugs of using invalid |
| // references. We rehash on the first insertion after reserved_growth_ reaches |
| // 0 after a call to reserve. We also do a rehash with low probability |
| // whenever reserved_growth_ is zero. |
| bool should_rehash_for_bug_detection_on_insert(const ctrl_t* ctrl, |
| size_t capacity) const; |
| void maybe_increment_generation_on_insert() { |
| if (reserved_growth_ == kReservedGrowthJustRanOut) reserved_growth_ = 0; |
| |
| if (reserved_growth_ > 0) { |
| if (--reserved_growth_ == 0) reserved_growth_ = kReservedGrowthJustRanOut; |
| } else { |
| *generation_ = NextGeneration(*generation_); |
| } |
| } |
| void reset_reserved_growth(size_t reservation, size_t size) { |
| reserved_growth_ = reservation - size; |
| } |
| size_t reserved_growth() const { return reserved_growth_; } |
| void set_reserved_growth(size_t r) { reserved_growth_ = r; } |
| GenerationType generation() const { return *generation_; } |
| void set_generation(GenerationType g) { *generation_ = g; } |
| GenerationType* generation_ptr() const { return generation_; } |
| void set_generation_ptr(GenerationType* g) { generation_ = g; } |
| |
| private: |
| // The number of insertions remaining that are guaranteed to not rehash due to |
| // a prior call to reserve. Note: we store reserved growth rather than |
| // reservation size because calls to erase() decrease size_ but don't decrease |
| // reserved growth. |
| size_t reserved_growth_ = 0; |
| // Pointer to the generation counter, which is used to validate iterators and |
| // is stored in the backing array between the control bytes and the slots. |
| // Note that we can't store the generation inside the container itself and |
| // keep a pointer to the container in the iterators because iterators must |
| // remain valid when the container is moved. |
| // Note: we could derive this pointer from the control pointer, but it makes |
| // the code more complicated, and there's a benefit in having the sizes of |
| // raw_hash_set in sanitizer mode and non-sanitizer mode a bit more different, |
| // which is that tests are less likely to rely on the size remaining the same. |
| GenerationType* generation_ = EmptyGeneration(); |
| }; |
| |
| class CommonFieldsGenerationInfoDisabled { |
| public: |
| CommonFieldsGenerationInfoDisabled() = default; |
| CommonFieldsGenerationInfoDisabled(CommonFieldsGenerationInfoDisabled&&) = |
| default; |
| CommonFieldsGenerationInfoDisabled& operator=( |
| CommonFieldsGenerationInfoDisabled&&) = default; |
| |
| bool should_rehash_for_bug_detection_on_insert(const ctrl_t*, size_t) const { |
| return false; |
| } |
| void maybe_increment_generation_on_insert() {} |
| void reset_reserved_growth(size_t, size_t) {} |
| size_t reserved_growth() const { return 0; } |
| void set_reserved_growth(size_t) {} |
| GenerationType generation() const { return 0; } |
| void set_generation(GenerationType) {} |
| GenerationType* generation_ptr() const { return nullptr; } |
| void set_generation_ptr(GenerationType*) {} |
| }; |
| |
| class HashSetIteratorGenerationInfoEnabled { |
| public: |
| HashSetIteratorGenerationInfoEnabled() = default; |
| explicit HashSetIteratorGenerationInfoEnabled( |
| const GenerationType* generation_ptr) |
| : generation_ptr_(generation_ptr), generation_(*generation_ptr) {} |
| |
| GenerationType generation() const { return generation_; } |
| void reset_generation() { generation_ = *generation_ptr_; } |
| const GenerationType* generation_ptr() const { return generation_ptr_; } |
| void set_generation_ptr(const GenerationType* ptr) { generation_ptr_ = ptr; } |
| |
| private: |
| const GenerationType* generation_ptr_ = EmptyGeneration(); |
| GenerationType generation_ = *generation_ptr_; |
| }; |
| |
| class HashSetIteratorGenerationInfoDisabled { |
| public: |
| HashSetIteratorGenerationInfoDisabled() = default; |
| explicit HashSetIteratorGenerationInfoDisabled(const GenerationType*) {} |
| |
| GenerationType generation() const { return 0; } |
| void reset_generation() {} |
| const GenerationType* generation_ptr() const { return nullptr; } |
| void set_generation_ptr(const GenerationType*) {} |
| }; |
| |
| #ifdef ABSL_SWISSTABLE_ENABLE_GENERATIONS |
| using CommonFieldsGenerationInfo = CommonFieldsGenerationInfoEnabled; |
| using HashSetIteratorGenerationInfo = HashSetIteratorGenerationInfoEnabled; |
| #else |
| using CommonFieldsGenerationInfo = CommonFieldsGenerationInfoDisabled; |
| using HashSetIteratorGenerationInfo = HashSetIteratorGenerationInfoDisabled; |
| #endif |
| |
| // CommonFields hold the fields in raw_hash_set that do not depend |
| // on template parameters. This allows us to conveniently pass all |
| // of this state to helper functions as a single argument. |
| class CommonFields : public CommonFieldsGenerationInfo { |
| public: |
| CommonFields() = default; |
| |
| // Not copyable |
| CommonFields(const CommonFields&) = delete; |
| CommonFields& operator=(const CommonFields&) = delete; |
| |
| // Movable |
| CommonFields(CommonFields&& that) |
| : CommonFieldsGenerationInfo( |
| std::move(static_cast<CommonFieldsGenerationInfo&&>(that))), |
| // Explicitly copying fields into "this" and then resetting "that" |
| // fields generates less code then calling absl::exchange per field. |
| control_(that.control_), |
| slots_(that.slots_), |
| size_(that.size_), |
| capacity_(that.capacity_), |
| compressed_tuple_(that.growth_left(), std::move(that.infoz())) { |
| that.control_ = EmptyGroup(); |
| that.slots_ = nullptr; |
| that.size_ = 0; |
| that.capacity_ = 0; |
| that.growth_left() = 0; |
| } |
| CommonFields& operator=(CommonFields&&) = default; |
| |
| // The number of slots we can still fill without needing to rehash. |
| size_t& growth_left() { return compressed_tuple_.template get<0>(); } |
| |
| HashtablezInfoHandle& infoz() { return compressed_tuple_.template get<1>(); } |
| const HashtablezInfoHandle& infoz() const { |
| return compressed_tuple_.template get<1>(); |
| } |
| |
| bool should_rehash_for_bug_detection_on_insert() const { |
| return CommonFieldsGenerationInfo:: |
| should_rehash_for_bug_detection_on_insert(control_, capacity_); |
| } |
| void reset_reserved_growth(size_t reservation) { |
| CommonFieldsGenerationInfo::reset_reserved_growth(reservation, size_); |
| } |
| |
| // TODO(b/259599413): Investigate removing some of these fields: |
| // - control/slots can be derived from each other |
| // - size can be moved into the slot array |
| |
| // The control bytes (and, also, a pointer to the base of the backing array). |
| // |
| // This contains `capacity + 1 + NumClonedBytes()` entries, even |
| // when the table is empty (hence EmptyGroup). |
| ctrl_t* control_ = EmptyGroup(); |
| |
| // The beginning of the slots, located at `SlotOffset()` bytes after |
| // `control`. May be null for empty tables. |
| void* slots_ = nullptr; |
| |
| // The number of filled slots. |
| size_t size_ = 0; |
| |
| // The total number of available slots. |
| size_t capacity_ = 0; |
| |
| // Bundle together growth_left and HashtablezInfoHandle to ensure EBO for |
| // HashtablezInfoHandle when sampling is turned off. |
| absl::container_internal::CompressedTuple<size_t, HashtablezInfoHandle> |
| compressed_tuple_{0u, HashtablezInfoHandle{}}; |
| }; |
| |
| // Returns he number of "cloned control bytes". |
| // |
| // This is the number of control bytes that are present both at the beginning |
| // of the control byte array and at the end, such that we can create a |
| // `Group::kWidth`-width probe window starting from any control byte. |
| constexpr size_t NumClonedBytes() { return Group::kWidth - 1; } |
| |
| template <class Policy, class Hash, class Eq, class Alloc> |
| class raw_hash_set; |
| |
| // Returns whether `n` is a valid capacity (i.e., number of slots). |
| // |
| // A valid capacity is a non-zero integer `2^m - 1`. |
| inline bool IsValidCapacity(size_t n) { return ((n + 1) & n) == 0 && n > 0; } |
| |
| // Returns the next valid capacity after `n`. |
| inline size_t NextCapacity(size_t n) { |
| assert(IsValidCapacity(n) || n == 0); |
| return n * 2 + 1; |
| } |
| |
| // Applies the following mapping to every byte in the control array: |
| // * kDeleted -> kEmpty |
| // * kEmpty -> kEmpty |
| // * _ -> kDeleted |
| // PRECONDITION: |
| // IsValidCapacity(capacity) |
| // ctrl[capacity] == ctrl_t::kSentinel |
| // ctrl[i] != ctrl_t::kSentinel for all i < capacity |
| void ConvertDeletedToEmptyAndFullToDeleted(ctrl_t* ctrl, size_t capacity); |
| |
| // Converts `n` into the next valid capacity, per `IsValidCapacity`. |
| inline size_t NormalizeCapacity(size_t n) { |
| return n ? ~size_t{} >> countl_zero(n) : 1; |
| } |
| |
| // General notes on capacity/growth methods below: |
| // - We use 7/8th as maximum load factor. For 16-wide groups, that gives an |
| // average of two empty slots per group. |
| // - For (capacity+1) >= Group::kWidth, growth is 7/8*capacity. |
| // - For (capacity+1) < Group::kWidth, growth == capacity. In this case, we |
| // never need to probe (the whole table fits in one group) so we don't need a |
| // load factor less than 1. |
| |
| // Given `capacity`, applies the load factor; i.e., it returns the maximum |
| // number of values we should put into the table before a resizing rehash. |
| inline size_t CapacityToGrowth(size_t capacity) { |
| assert(IsValidCapacity(capacity)); |
| // `capacity*7/8` |
| if (Group::kWidth == 8 && capacity == 7) { |
| // x-x/8 does not work when x==7. |
| return 6; |
| } |
| return capacity - capacity / 8; |
| } |
| |
| // Given `growth`, "unapplies" the load factor to find how large the capacity |
| // should be to stay within the load factor. |
| // |
| // This might not be a valid capacity and `NormalizeCapacity()` should be |
| // called on this. |
| inline size_t GrowthToLowerboundCapacity(size_t growth) { |
| // `growth*8/7` |
| if (Group::kWidth == 8 && growth == 7) { |
| // x+(x-1)/7 does not work when x==7. |
| return 8; |
| } |
| return growth + static_cast<size_t>((static_cast<int64_t>(growth) - 1) / 7); |
| } |
| |
| template <class InputIter> |
| size_t SelectBucketCountForIterRange(InputIter first, InputIter last, |
| size_t bucket_count) { |
| if (bucket_count != 0) { |
| return bucket_count; |
| } |
| using InputIterCategory = |
| typename std::iterator_traits<InputIter>::iterator_category; |
| if (std::is_base_of<std::random_access_iterator_tag, |
| InputIterCategory>::value) { |
| return GrowthToLowerboundCapacity( |
| static_cast<size_t>(std::distance(first, last))); |
| } |
| return 0; |
| } |
| |
| constexpr bool SwisstableDebugEnabled() { |
| #if defined(ABSL_SWISSTABLE_ENABLE_GENERATIONS) || \ |
| ABSL_OPTION_HARDENED == 1 || !defined(NDEBUG) |
| return true; |
| #else |
| return false; |
| #endif |
| } |
| |
| inline void AssertIsFull(const ctrl_t* ctrl, GenerationType generation, |
| const GenerationType* generation_ptr, |
| const char* operation) { |
| if (!SwisstableDebugEnabled()) return; |
| if (ctrl == nullptr) { |
| ABSL_INTERNAL_LOG(FATAL, |
| std::string(operation) + " called on end() iterator."); |
| } |
| if (ctrl == EmptyGroup()) { |
| ABSL_INTERNAL_LOG(FATAL, std::string(operation) + |
| " called on default-constructed iterator."); |
| } |
| if (SwisstableGenerationsEnabled()) { |
| if (generation != *generation_ptr) { |
| ABSL_INTERNAL_LOG(FATAL, |
| std::string(operation) + |
| " called on invalid iterator. The table could have " |
| "rehashed since this iterator was initialized."); |
| } |
| if (!IsFull(*ctrl)) { |
| ABSL_INTERNAL_LOG( |
| FATAL, |
| std::string(operation) + |
| " called on invalid iterator. The element was likely erased."); |
| } |
| } else { |
| if (!IsFull(*ctrl)) { |
| ABSL_INTERNAL_LOG( |
| FATAL, |
| std::string(operation) + |
| " called on invalid iterator. The element might have been erased " |
| "or the table might have rehashed. Consider running with " |
| "--config=asan to diagnose rehashing issues."); |
| } |
| } |
| } |
| |
| // Note that for comparisons, null/end iterators are valid. |
| inline void AssertIsValidForComparison(const ctrl_t* ctrl, |
| GenerationType generation, |
| const GenerationType* generation_ptr) { |
| if (!SwisstableDebugEnabled()) return; |
| const bool ctrl_is_valid_for_comparison = |
| ctrl == nullptr || ctrl == EmptyGroup() || IsFull(*ctrl); |
| if (SwisstableGenerationsEnabled()) { |
| if (generation != *generation_ptr) { |
| ABSL_INTERNAL_LOG(FATAL, |
| "Invalid iterator comparison. The table could have " |
| "rehashed since this iterator was initialized."); |
| } |
| if (!ctrl_is_valid_for_comparison) { |
| ABSL_INTERNAL_LOG( |
| FATAL, "Invalid iterator comparison. The element was likely erased."); |
| } |
| } else { |
| ABSL_HARDENING_ASSERT( |
| ctrl_is_valid_for_comparison && |
| "Invalid iterator comparison. The element might have been erased or " |
| "the table might have rehashed. Consider running with --config=asan to " |
| "diagnose rehashing issues."); |
| } |
| } |
| |
| // If the two iterators come from the same container, then their pointers will |
| // interleave such that ctrl_a <= ctrl_b < slot_a <= slot_b or vice/versa. |
| // Note: we take slots by reference so that it's not UB if they're uninitialized |
| // as long as we don't read them (when ctrl is null). |
| inline bool AreItersFromSameContainer(const ctrl_t* ctrl_a, |
| const ctrl_t* ctrl_b, |
| const void* const& slot_a, |
| const void* const& slot_b) { |
| // If either control byte is null, then we can't tell. |
| if (ctrl_a == nullptr || ctrl_b == nullptr) return true; |
| const void* low_slot = slot_a; |
| const void* hi_slot = slot_b; |
| if (ctrl_a > ctrl_b) { |
| std::swap(ctrl_a, ctrl_b); |
| std::swap(low_slot, hi_slot); |
| } |
| return ctrl_b < low_slot && low_slot <= hi_slot; |
| } |
| |
| // Asserts that two iterators come from the same container. |
| // Note: we take slots by reference so that it's not UB if they're uninitialized |
| // as long as we don't read them (when ctrl is null). |
| inline void AssertSameContainer(const ctrl_t* ctrl_a, const ctrl_t* ctrl_b, |
| const void* const& slot_a, |
| const void* const& slot_b, |
| const GenerationType* generation_ptr_a, |
| const GenerationType* generation_ptr_b) { |
| if (!SwisstableDebugEnabled()) return; |
| const bool a_is_default = ctrl_a == EmptyGroup(); |
| const bool b_is_default = ctrl_b == EmptyGroup(); |
| if (a_is_default != b_is_default) { |
| ABSL_INTERNAL_LOG( |
| FATAL, |
| "Invalid iterator comparison. Comparing default-constructed iterator " |
| "with non-default-constructed iterator."); |
| } |
| if (a_is_default && b_is_default) return; |
| |
| if (SwisstableGenerationsEnabled()) { |
| if (generation_ptr_a == generation_ptr_b) return; |
| const bool a_is_empty = IsEmptyGeneration(generation_ptr_a); |
| const bool b_is_empty = IsEmptyGeneration(generation_ptr_b); |
| if (a_is_empty != b_is_empty) { |
| ABSL_INTERNAL_LOG(FATAL, |
| "Invalid iterator comparison. Comparing iterator from " |
| "a non-empty hashtable with an iterator from an empty " |
| "hashtable."); |
| } |
| if (a_is_empty && b_is_empty) { |
| ABSL_INTERNAL_LOG(FATAL, |
| "Invalid iterator comparison. Comparing iterators from " |
| "different empty hashtables."); |
| } |
| const bool a_is_end = ctrl_a == nullptr; |
| const bool b_is_end = ctrl_b == nullptr; |
| if (a_is_end || b_is_end) { |
| ABSL_INTERNAL_LOG(FATAL, |
| "Invalid iterator comparison. Comparing iterator with " |
| "an end() iterator from a different hashtable."); |
| } |
| ABSL_INTERNAL_LOG(FATAL, |
| "Invalid iterator comparison. Comparing non-end() " |
| "iterators from different hashtables."); |
| } else { |
| ABSL_HARDENING_ASSERT( |
| AreItersFromSameContainer(ctrl_a, ctrl_b, slot_a, slot_b) && |
| "Invalid iterator comparison. The iterators may be from different " |
| "containers or the container might have rehashed. Consider running " |
| "with --config=asan to diagnose rehashing issues."); |
| } |
| } |
| |
| struct FindInfo { |
| size_t offset; |
| size_t probe_length; |
| }; |
| |
| // Whether a table is "small". A small table fits entirely into a probing |
| // group, i.e., has a capacity < `Group::kWidth`. |
| // |
| // In small mode we are able to use the whole capacity. The extra control |
| // bytes give us at least one "empty" control byte to stop the iteration. |
| // This is important to make 1 a valid capacity. |
| // |
| // In small mode only the first `capacity` control bytes after the sentinel |
| // are valid. The rest contain dummy ctrl_t::kEmpty values that do not |
| // represent a real slot. This is important to take into account on |
| // `find_first_non_full()`, where we never try |
| // `ShouldInsertBackwards()` for small tables. |
| inline bool is_small(size_t capacity) { return capacity < Group::kWidth - 1; } |
| |
| // Begins a probing operation on `common.control`, using `hash`. |
| inline probe_seq<Group::kWidth> probe(const ctrl_t* ctrl, const size_t capacity, |
| size_t hash) { |
| return probe_seq<Group::kWidth>(H1(hash, ctrl), capacity); |
| } |
| inline probe_seq<Group::kWidth> probe(const CommonFields& common, size_t hash) { |
| return probe(common.control_, common.capacity_, hash); |
| } |
| |
| // Probes an array of control bits using a probe sequence derived from `hash`, |
| // and returns the offset corresponding to the first deleted or empty slot. |
| // |
| // Behavior when the entire table is full is undefined. |
| // |
| // NOTE: this function must work with tables having both empty and deleted |
| // slots in the same group. Such tables appear during `erase()`. |
| template <typename = void> |
| inline FindInfo find_first_non_full(const CommonFields& common, size_t hash) { |
| auto seq = probe(common, hash); |
| const ctrl_t* ctrl = common.control_; |
| while (true) { |
| Group g{ctrl + seq.offset()}; |
| auto mask = g.MaskEmptyOrDeleted(); |
| if (mask) { |
| #if !defined(NDEBUG) |
| // We want to add entropy even when ASLR is not enabled. |
| // In debug build we will randomly insert in either the front or back of |
| // the group. |
| // TODO(kfm,sbenza): revisit after we do unconditional mixing |
| if (!is_small(common.capacity_) && ShouldInsertBackwards(hash, ctrl)) { |
| return {seq.offset(mask.HighestBitSet()), seq.index()}; |
| } |
| #endif |
| return {seq.offset(mask.LowestBitSet()), seq.index()}; |
| } |
| seq.next(); |
| assert(seq.index() <= common.capacity_ && "full table!"); |
| } |
| } |
| |
| // Extern template for inline function keep possibility of inlining. |
| // When compiler decided to not inline, no symbols will be added to the |
| // corresponding translation unit. |
| extern template FindInfo find_first_non_full(const CommonFields&, size_t); |
| |
| // Non-inlined version of find_first_non_full for use in less |
| // performance critical routines. |
| FindInfo find_first_non_full_outofline(const CommonFields&, size_t); |
| |
| inline void ResetGrowthLeft(CommonFields& common) { |
| common.growth_left() = CapacityToGrowth(common.capacity_) - common.size_; |
| } |
| |
| // Sets `ctrl` to `{kEmpty, kSentinel, ..., kEmpty}`, marking the entire |
| // array as marked as empty. |
| inline void ResetCtrl(CommonFields& common, size_t slot_size) { |
| const size_t capacity = common.capacity_; |
| ctrl_t* ctrl = common.control_; |
| std::memset(ctrl, static_cast<int8_t>(ctrl_t::kEmpty), |
| capacity + 1 + NumClonedBytes()); |
| ctrl[capacity] = ctrl_t::kSentinel; |
| SanitizerPoisonMemoryRegion(common.slots_, slot_size * capacity); |
| ResetGrowthLeft(common); |
| } |
| |
| // Sets `ctrl[i]` to `h`. |
| // |
| // Unlike setting it directly, this function will perform bounds checks and |
| // mirror the value to the cloned tail if necessary. |
| inline void SetCtrl(const CommonFields& common, size_t i, ctrl_t h, |
| size_t slot_size) { |
| const size_t capacity = common.capacity_; |
| assert(i < capacity); |
| |
| auto* slot_i = static_cast<const char*>(common.slots_) + i * slot_size; |
| if (IsFull(h)) { |
| SanitizerUnpoisonMemoryRegion(slot_i, slot_size); |
| } else { |
| SanitizerPoisonMemoryRegion(slot_i, slot_size); |
| } |
| |
| ctrl_t* ctrl = common.control_; |
| ctrl[i] = h; |
| ctrl[((i - NumClonedBytes()) & capacity) + (NumClonedBytes() & capacity)] = h; |
| } |
| |
| // Overload for setting to an occupied `h2_t` rather than a special `ctrl_t`. |
| inline void SetCtrl(const CommonFields& common, size_t i, h2_t h, |
| size_t slot_size) { |
| SetCtrl(common, i, static_cast<ctrl_t>(h), slot_size); |
| } |
| |
| // Given the capacity of a table, computes the offset (from the start of the |
| // backing allocation) of the generation counter (if it exists). |
| inline size_t GenerationOffset(size_t capacity) { |
| assert(IsValidCapacity(capacity)); |
| const size_t num_control_bytes = capacity + 1 + NumClonedBytes(); |
| return num_control_bytes; |
| } |
| |
| // Given the capacity of a table, computes the offset (from the start of the |
| // backing allocation) at which the slots begin. |
| inline size_t SlotOffset(size_t capacity, size_t slot_align) { |
| assert(IsValidCapacity(capacity)); |
| const size_t num_control_bytes = capacity + 1 + NumClonedBytes(); |
| return (num_control_bytes + NumGenerationBytes() + slot_align - 1) & |
| (~slot_align + 1); |
| } |
| |
| // Given the capacity of a table, computes the total size of the backing |
| // array. |
| inline size_t AllocSize(size_t capacity, size_t slot_size, size_t slot_align) { |
| return SlotOffset(capacity, slot_align) + capacity * slot_size; |
| } |
| |
| template <typename Alloc, size_t SizeOfSlot, size_t AlignOfSlot> |
| ABSL_ATTRIBUTE_NOINLINE void InitializeSlots(CommonFields& c, Alloc alloc) { |
| assert(c.capacity_); |
| // Folks with custom allocators often make unwarranted assumptions about the |
| // behavior of their classes vis-a-vis trivial destructability and what |
| // calls they will or won't make. Avoid sampling for people with custom |
| // allocators to get us out of this mess. This is not a hard guarantee but |
| // a workaround while we plan the exact guarantee we want to provide. |
| const size_t sample_size = |
| (std::is_same<Alloc, std::allocator<char>>::value && c.slots_ == nullptr) |
| ? SizeOfSlot |
| : 0; |
| |
| const size_t cap = c.capacity_; |
| char* mem = static_cast<char*>( |
| Allocate<AlignOfSlot>(&alloc, AllocSize(cap, SizeOfSlot, AlignOfSlot))); |
| const GenerationType old_generation = c.generation(); |
| c.set_generation_ptr( |
| reinterpret_cast<GenerationType*>(mem + GenerationOffset(cap))); |
| c.set_generation(NextGeneration(old_generation)); |
| c.control_ = reinterpret_cast<ctrl_t*>(mem); |
| c.slots_ = mem + SlotOffset(cap, AlignOfSlot); |
| ResetCtrl(c, SizeOfSlot); |
| if (sample_size) { |
| c.infoz() = Sample(sample_size); |
| } |
| c.infoz().RecordStorageChanged(c.size_, cap); |
| } |
| |
| // PolicyFunctions bundles together some information for a particular |
| // raw_hash_set<T, ...> instantiation. This information is passed to |
| // type-erased functions that want to do small amounts of type-specific |
| // work. |
| struct PolicyFunctions { |
| size_t slot_size; |
| |
| // Return the hash of the pointed-to slot. |
| size_t (*hash_slot)(void* set, void* slot); |
| |
| // Transfer the contents of src_slot to dst_slot. |
| void (*transfer)(void* set, void* dst_slot, void* src_slot); |
| |
| // Deallocate the specified backing store which is sized for n slots. |
| void (*dealloc)(void* set, const PolicyFunctions& policy, ctrl_t* ctrl, |
| void* slot_array, size_t n); |
| }; |
| |
| // ClearBackingArray clears the backing array, either modifying it in place, |
| // or creating a new one based on the value of "reuse". |
| // REQUIRES: c.capacity > 0 |
| void ClearBackingArray(CommonFields& c, const PolicyFunctions& policy, |
| bool reuse); |
| |
| // Type-erased version of raw_hash_set::erase_meta_only. |
| void EraseMetaOnly(CommonFields& c, ctrl_t* it, size_t slot_size); |
| |
| // Function to place in PolicyFunctions::dealloc for raw_hash_sets |
| // that are using std::allocator. This allows us to share the same |
| // function body for raw_hash_set instantiations that have the |
| // same slot alignment. |
| template <size_t AlignOfSlot> |
| ABSL_ATTRIBUTE_NOINLINE void DeallocateStandard(void*, |
| const PolicyFunctions& policy, |
| ctrl_t* ctrl, void* slot_array, |
| size_t n) { |
| // Unpoison before returning the memory to the allocator. |
| SanitizerUnpoisonMemoryRegion(slot_array, policy.slot_size * n); |
| |
| std::allocator<char> alloc; |
| Deallocate<AlignOfSlot>(&alloc, ctrl, |
| AllocSize(n, policy.slot_size, AlignOfSlot)); |
| } |
| |
| // For trivially relocatable types we use memcpy directly. This allows us to |
| // share the same function body for raw_hash_set instantiations that have the |
| // same slot size as long as they are relocatable. |
| template <size_t SizeOfSlot> |
| ABSL_ATTRIBUTE_NOINLINE void TransferRelocatable(void*, void* dst, void* src) { |
| memcpy(dst, src, SizeOfSlot); |
| } |
| |
| // Type-erased version of raw_hash_set::drop_deletes_without_resize. |
| void DropDeletesWithoutResize(CommonFields& common, |
| const PolicyFunctions& policy, void* tmp_space); |
| |
| // A SwissTable. |
| // |
| // Policy: a policy defines how to perform different operations on |
| // the slots of the hashtable (see hash_policy_traits.h for the full interface |
| // of policy). |
| // |
| // Hash: a (possibly polymorphic) functor that hashes keys of the hashtable. The |
| // functor should accept a key and return size_t as hash. For best performance |
| // it is important that the hash function provides high entropy across all bits |
| // of the hash. |
| // |
| // Eq: a (possibly polymorphic) functor that compares two keys for equality. It |
| // should accept two (of possibly different type) keys and return a bool: true |
| // if they are equal, false if they are not. If two keys compare equal, then |
| // their hash values as defined by Hash MUST be equal. |
| // |
| // Allocator: an Allocator |
| // [https://en.cppreference.com/w/cpp/named_req/Allocator] with which |
| // the storage of the hashtable will be allocated and the elements will be |
| // constructed and destroyed. |
| template <class Policy, class Hash, class Eq, class Alloc> |
| class raw_hash_set { |
| using PolicyTraits = hash_policy_traits<Policy>; |
| using KeyArgImpl = |
| KeyArg<IsTransparent<Eq>::value && IsTransparent<Hash>::value>; |
| |
| public: |
| using init_type = typename PolicyTraits::init_type; |
| using key_type = typename PolicyTraits::key_type; |
| // TODO(sbenza): Hide slot_type as it is an implementation detail. Needs user |
| // code fixes! |
| using slot_type = typename PolicyTraits::slot_type; |
| using allocator_type = Alloc; |
| using size_type = size_t; |
| using difference_type = ptrdiff_t; |
| using hasher = Hash; |
| using key_equal = Eq; |
| using policy_type = Policy; |
| using value_type = typename PolicyTraits::value_type; |
| using reference = value_type&; |
| using const_reference = const value_type&; |
| using pointer = typename absl::allocator_traits< |
| allocator_type>::template rebind_traits<value_type>::pointer; |
| using const_pointer = typename absl::allocator_traits< |
| allocator_type>::template rebind_traits<value_type>::const_pointer; |
| |
| // Alias used for heterogeneous lookup functions. |
| // `key_arg<K>` evaluates to `K` when the functors are transparent and to |
| // `key_type` otherwise. It permits template argument deduction on `K` for the |
| // transparent case. |
| template <class K> |
| using key_arg = typename KeyArgImpl::template type<K, key_type>; |
| |
| private: |
| // Give an early error when key_type is not hashable/eq. |
| auto KeyTypeCanBeHashed(const Hash& h, const key_type& k) -> decltype(h(k)); |
| auto KeyTypeCanBeEq(const Eq& eq, const key_type& k) -> decltype(eq(k, k)); |
| |
| using AllocTraits = absl::allocator_traits<allocator_type>; |
| using SlotAlloc = typename absl::allocator_traits< |
| allocator_type>::template rebind_alloc<slot_type>; |
| using SlotAllocTraits = typename absl::allocator_traits< |
| allocator_type>::template rebind_traits<slot_type>; |
| |
| static_assert(std::is_lvalue_reference<reference>::value, |
| "Policy::element() must return a reference"); |
| |
| template <typename T> |
| struct SameAsElementReference |
| : std::is_same<typename std::remove_cv< |
| typename std::remove_reference<reference>::type>::type, |
| typename std::remove_cv< |
| typename std::remove_reference<T>::type>::type> {}; |
| |
| // An enabler for insert(T&&): T must be convertible to init_type or be the |
| // same as [cv] value_type [ref]. |
| // Note: we separate SameAsElementReference into its own type to avoid using |
| // reference unless we need to. MSVC doesn't seem to like it in some |
| // cases. |
| template <class T> |
| using RequiresInsertable = typename std::enable_if< |
| absl::disjunction<std::is_convertible<T, init_type>, |
| SameAsElementReference<T>>::value, |
| int>::type; |
| |
| // RequiresNotInit is a workaround for gcc prior to 7.1. |
| // See https://godbolt.org/g/Y4xsUh. |
| template <class T> |
| using RequiresNotInit = |
| typename std::enable_if<!std::is_same<T, init_type>::value, int>::type; |
| |
| template <class... Ts> |
| using IsDecomposable = IsDecomposable<void, PolicyTraits, Hash, Eq, Ts...>; |
| |
| public: |
| static_assert(std::is_same<pointer, value_type*>::value, |
| "Allocators with custom pointer types are not supported"); |
| static_assert(std::is_same<const_pointer, const value_type*>::value, |
| "Allocators with custom pointer types are not supported"); |
| |
| class iterator : private HashSetIteratorGenerationInfo { |
| friend class raw_hash_set; |
| |
| public: |
| using iterator_category = std::forward_iterator_tag; |
| using value_type = typename raw_hash_set::value_type; |
| using reference = |
| absl::conditional_t<PolicyTraits::constant_iterators::value, |
| const value_type&, value_type&>; |
| using pointer = absl::remove_reference_t<reference>*; |
| using difference_type = typename raw_hash_set::difference_type; |
| |
| iterator() {} |
| |
| // PRECONDITION: not an end() iterator. |
| reference operator*() const { |
| AssertIsFull(ctrl_, generation(), generation_ptr(), "operator*()"); |
| return PolicyTraits::element(slot_); |
| } |
| |
| // PRECONDITION: not an end() iterator. |
| pointer operator->() const { |
| AssertIsFull(ctrl_, generation(), generation_ptr(), "operator->"); |
| return &operator*(); |
| } |
| |
| // PRECONDITION: not an end() iterator. |
| iterator& operator++() { |
| AssertIsFull(ctrl_, generation(), generation_ptr(), "operator++"); |
| ++ctrl_; |
| ++slot_; |
| skip_empty_or_deleted(); |
| return *this; |
| } |
| // PRECONDITION: not an end() iterator. |
| iterator operator++(int) { |
| auto tmp = *this; |
| ++*this; |
| return tmp; |
| } |
| |
| friend bool operator==(const iterator& a, const iterator& b) { |
| AssertIsValidForComparison(a.ctrl_, a.generation(), a.generation_ptr()); |
| AssertIsValidForComparison(b.ctrl_, b.generation(), b.generation_ptr()); |
| AssertSameContainer(a.ctrl_, b.ctrl_, a.slot_, b.slot_, |
| a.generation_ptr(), b.generation_ptr()); |
| return a.ctrl_ == b.ctrl_; |
| } |
| friend bool operator!=(const iterator& a, const iterator& b) { |
| return !(a == b); |
| } |
| |
| private: |
| iterator(ctrl_t* ctrl, slot_type* slot, |
| const GenerationType* generation_ptr) |
| : HashSetIteratorGenerationInfo(generation_ptr), |
| ctrl_(ctrl), |
| slot_(slot) { |
| // This assumption helps the compiler know that any non-end iterator is |
| // not equal to any end iterator. |
| ABSL_ASSUME(ctrl != nullptr); |
| } |
| // For end() iterators. |
| explicit iterator(const GenerationType* generation_ptr) |
| : HashSetIteratorGenerationInfo(generation_ptr), ctrl_(nullptr) {} |
| |
| // Fixes up `ctrl_` to point to a full by advancing it and `slot_` until |
| // they reach one. |
| // |
| // If a sentinel is reached, we null `ctrl_` out instead. |
| void skip_empty_or_deleted() { |
| while (IsEmptyOrDeleted(*ctrl_)) { |
| uint32_t shift = Group{ctrl_}.CountLeadingEmptyOrDeleted(); |
| ctrl_ += shift; |
| slot_ += shift; |
| } |
| if (ABSL_PREDICT_FALSE(*ctrl_ == ctrl_t::kSentinel)) ctrl_ = nullptr; |
| } |
| |
| // We use EmptyGroup() for default-constructed iterators so that they can |
| // be distinguished from end iterators, which have nullptr ctrl_. |
| ctrl_t* ctrl_ = EmptyGroup(); |
| // To avoid uninitialized member warnings, put slot_ in an anonymous union. |
| // The member is not initialized on singleton and end iterators. |
| union { |
| slot_type* slot_; |
| }; |
| }; |
| |
| class const_iterator { |
| friend class raw_hash_set; |
| |
| public: |
| using iterator_category = typename iterator::iterator_category; |
| using value_type = typename raw_hash_set::value_type; |
| using reference = typename raw_hash_set::const_reference; |
| using pointer = typename raw_hash_set::const_pointer; |
| using difference_type = typename raw_hash_set::difference_type; |
| |
| const_iterator() = default; |
| // Implicit construction from iterator. |
| const_iterator(iterator i) : inner_(std::move(i)) {} // NOLINT |
| |
| reference operator*() const { return *inner_; } |
| pointer operator->() const { return inner_.operator->(); } |
| |
| const_iterator& operator++() { |
| ++inner_; |
| return *this; |
| } |
| const_iterator operator++(int) { return inner_++; } |
| |
| friend bool operator==(const const_iterator& a, const const_iterator& b) { |
| return a.inner_ == b.inner_; |
| } |
| friend bool operator!=(const const_iterator& a, const const_iterator& b) { |
| return !(a == b); |
| } |
| |
| private: |
| const_iterator(const ctrl_t* ctrl, const slot_type* slot, |
| const GenerationType* gen) |
| : inner_(const_cast<ctrl_t*>(ctrl), const_cast<slot_type*>(slot), gen) { |
| } |
| |
| iterator inner_; |
| }; |
| |
| using node_type = node_handle<Policy, hash_policy_traits<Policy>, Alloc>; |
| using insert_return_type = InsertReturnType<iterator, node_type>; |
| |
| // Note: can't use `= default` due to non-default noexcept (causes |
| // problems for some compilers). NOLINTNEXTLINE |
| raw_hash_set() noexcept( |
| std::is_nothrow_default_constructible<hasher>::value&& |
| std::is_nothrow_default_constructible<key_equal>::value&& |
| std::is_nothrow_default_constructible<allocator_type>::value) {} |
| |
| ABSL_ATTRIBUTE_NOINLINE explicit raw_hash_set( |
| size_t bucket_count, const hasher& hash = hasher(), |
| const key_equal& eq = key_equal(), |
| const allocator_type& alloc = allocator_type()) |
| : settings_(CommonFields{}, hash, eq, alloc) { |
| if (bucket_count) { |
| common().capacity_ = NormalizeCapacity(bucket_count); |
| initialize_slots(); |
| } |
| } |
| |
| raw_hash_set(size_t bucket_count, const hasher& hash, |
| const allocator_type& alloc) |
| : raw_hash_set(bucket_count, hash, key_equal(), alloc) {} |
| |
| raw_hash_set(size_t bucket_count, const allocator_type& alloc) |
| : raw_hash_set(bucket_count, hasher(), key_equal(), alloc) {} |
| |
| explicit raw_hash_set(const allocator_type& alloc) |
| : raw_hash_set(0, hasher(), key_equal(), alloc) {} |
| |
| template <class InputIter> |
| raw_hash_set(InputIter first, InputIter last, size_t bucket_count = 0, |
| const hasher& hash = hasher(), const key_equal& eq = key_equal(), |
| const allocator_type& alloc = allocator_type()) |
| : raw_hash_set(SelectBucketCountForIterRange(first, last, bucket_count), |
| hash, eq, alloc) { |
| insert(first, last); |
| } |
| |
| template <class InputIter> |
| raw_hash_set(InputIter first, InputIter last, size_t bucket_count, |
| const hasher& hash, const allocator_type& alloc) |
| : raw_hash_set(first, last, bucket_count, hash, key_equal(), alloc) {} |
| |
| template <class InputIter> |
| raw_hash_set(InputIter first, InputIter last, size_t bucket_count, |
| const allocator_type& alloc) |
| : raw_hash_set(first, last, bucket_count, hasher(), key_equal(), alloc) {} |
| |
| template <class InputIter> |
| raw_hash_set(InputIter first, InputIter last, const allocator_type& alloc) |
| : raw_hash_set(first, last, 0, hasher(), key_equal(), alloc) {} |
| |
| // Instead of accepting std::initializer_list<value_type> as the first |
| // argument like std::unordered_set<value_type> does, we have two overloads |
| // that accept std::initializer_list<T> and std::initializer_list<init_type>. |
| // This is advantageous for performance. |
| // |
| // // Turns {"abc", "def"} into std::initializer_list<std::string>, then |
| // // copies the strings into the set. |
| // std::unordered_set<std::string> s = {"abc", "def"}; |
| // |
| // // Turns {"abc", "def"} into std::initializer_list<const char*>, then |
| // // copies the strings into the set. |
| // absl::flat_hash_set<std::string> s = {"abc", "def"}; |
| // |
| // The same trick is used in insert(). |
| // |
| // The enabler is necessary to prevent this constructor from triggering where |
| // the copy constructor is meant to be called. |
| // |
| // absl::flat_hash_set<int> a, b{a}; |
| // |
| // RequiresNotInit<T> is a workaround for gcc prior to 7.1. |
| template <class T, RequiresNotInit<T> = 0, RequiresInsertable<T> = 0> |
| raw_hash_set(std::initializer_list<T> init, size_t bucket_count = 0, |
| const hasher& hash = hasher(), const key_equal& eq = key_equal(), |
| const allocator_type& alloc = allocator_type()) |
| : raw_hash_set(init.begin(), init.end(), bucket_count, hash, eq, alloc) {} |
| |
| raw_hash_set(std::initializer_list<init_type> init, size_t bucket_count = 0, |
| const hasher& hash = hasher(), const key_equal& eq = key_equal(), |
| const allocator_type& alloc = allocator_type()) |
| : raw_hash_set(init.begin(), init.end(), bucket_count, hash, eq, alloc) {} |
| |
| template <class T, RequiresNotInit<T> = 0, RequiresInsertable<T> = 0> |
| raw_hash_set(std::initializer_list<T> init, size_t bucket_count, |
| const hasher& hash, const allocator_type& alloc) |
| : raw_hash_set(init, bucket_count, hash, key_equal(), alloc) {} |
| |
| raw_hash_set(std::initializer_list<init_type> init, size_t bucket_count, |
| const hasher& hash, const allocator_type& alloc) |
| : raw_hash_set(init, bucket_count, hash, key_equal(), alloc) {} |
| |
| template <class T, RequiresNotInit<T> = 0, RequiresInsertable<T> = 0> |
| raw_hash_set(std::initializer_list<T> init, size_t bucket_count, |
| const allocator_type& alloc) |
| : raw_hash_set(init, bucket_count, hasher(), key_equal(), alloc) {} |
| |
| raw_hash_set(std::initializer_list<init_type> init, size_t bucket_count, |
| const allocator_type& alloc) |
| : raw_hash_set(init, bucket_count, hasher(), key_equal(), alloc) {} |
| |
| template <class T, RequiresNotInit<T> = 0, RequiresInsertable<T> = 0> |
| raw_hash_set(std::initializer_list<T> init, const allocator_type& alloc) |
| : raw_hash_set(init, 0, hasher(), key_equal(), alloc) {} |
| |
| raw_hash_set(std::initializer_list<init_type> init, |
| const allocator_type& alloc) |
| : raw_hash_set(init, 0, hasher(), key_equal(), alloc) {} |
| |
| raw_hash_set(const raw_hash_set& that) |
| : raw_hash_set(that, AllocTraits::select_on_container_copy_construction( |
| that.alloc_ref())) {} |
| |
| raw_hash_set(const raw_hash_set& that, const allocator_type& a) |
| : raw_hash_set(0, that.hash_ref(), that.eq_ref(), a) { |
| reserve(that.size()); |
| // Because the table is guaranteed to be empty, we can do something faster |
| // than a full `insert`. |
| for (const auto& v : that) { |
| const size_t hash = PolicyTraits::apply(HashElement{hash_ref()}, v); |
| auto target = find_first_non_full_outofline(common(), hash); |
| SetCtrl(common(), target.offset, H2(hash), sizeof(slot_type)); |
| emplace_at(target.offset, v); |
| common().maybe_increment_generation_on_insert(); |
| infoz().RecordInsert(hash, target.probe_length); |
| } |
| common().size_ = that.size(); |
| growth_left() -= that.size(); |
| } |
| |
| ABSL_ATTRIBUTE_NOINLINE raw_hash_set(raw_hash_set&& that) noexcept( |
| std::is_nothrow_copy_constructible<hasher>::value&& |
| std::is_nothrow_copy_constructible<key_equal>::value&& |
| std::is_nothrow_copy_constructible<allocator_type>::value) |
| : // Hash, equality and allocator are copied instead of moved because |
| // `that` must be left valid. If Hash is std::function<Key>, moving it |
| // would create a nullptr functor that cannot be called. |
| settings_(absl::exchange(that.common(), CommonFields{}), |
| that.hash_ref(), that.eq_ref(), that.alloc_ref()) {} |
| |
| raw_hash_set(raw_hash_set&& that, const allocator_type& a) |
| : settings_(CommonFields{}, that.hash_ref(), that.eq_ref(), a) { |
| if (a == that.alloc_ref()) { |
| std::swap(common(), that.common()); |
| } else { |
| reserve(that.size()); |
| // Note: this will copy elements of dense_set and unordered_set instead of |
| // moving them. This can be fixed if it ever becomes an issue. |
| for (auto& elem : that) insert(std::move(elem)); |
| } |
| } |
| |
| raw_hash_set& operator=(const raw_hash_set& that) { |
| raw_hash_set tmp(that, |
| AllocTraits::propagate_on_container_copy_assignment::value |
| ? that.alloc_ref() |
| : alloc_ref()); |
| swap(tmp); |
| return *this; |
| } |
| |
| raw_hash_set& operator=(raw_hash_set&& that) noexcept( |
| absl::allocator_traits<allocator_type>::is_always_equal::value&& |
| std::is_nothrow_move_assignable<hasher>::value&& |
| std::is_nothrow_move_assignable<key_equal>::value) { |
| // TODO(sbenza): We should only use the operations from the noexcept clause |
| // to make sure we actually adhere to that contract. |
| // NOLINTNEXTLINE: not returning *this for performance. |
| return move_assign( |
| std::move(that), |
| typename AllocTraits::propagate_on_container_move_assignment()); |
| } |
| |
| ~raw_hash_set() { |
| const size_t cap = capacity(); |
| if (!cap) return; |
| destroy_slots(); |
| |
| // Unpoison before returning the memory to the allocator. |
| SanitizerUnpoisonMemoryRegion(slot_array(), sizeof(slot_type) * cap); |
| Deallocate<alignof(slot_type)>( |
| &alloc_ref(), control(), |
| AllocSize(cap, sizeof(slot_type), alignof(slot_type))); |
| |
| infoz().Unregister(); |
| } |
| |
| iterator begin() { |
| auto it = iterator_at(0); |
| it.skip_empty_or_deleted(); |
| return it; |
| } |
| iterator end() { return iterator(common().generation_ptr()); } |
| |
| const_iterator begin() const { |
| return const_cast<raw_hash_set*>(this)->begin(); |
| } |
| const_iterator end() const { return iterator(common().generation_ptr()); } |
| const_iterator cbegin() const { return begin(); } |
| const_iterator cend() const { return end(); } |
| |
| bool empty() const { return !size(); } |
| size_t size() const { return common().size_; } |
| size_t capacity() const { return common().capacity_; } |
| size_t max_size() const { return (std::numeric_limits<size_t>::max)(); } |
| |
| ABSL_ATTRIBUTE_REINITIALIZES void clear() { |
| // Iterating over this container is O(bucket_count()). When bucket_count() |
| // is much greater than size(), iteration becomes prohibitively expensive. |
| // For clear() it is more important to reuse the allocated array when the |
| // container is small because allocation takes comparatively long time |
| // compared to destruction of the elements of the container. So we pick the |
| // largest bucket_count() threshold for which iteration is still fast and |
| // past that we simply deallocate the array. |
| const size_t cap = capacity(); |
| if (cap == 0) { |
| // Already guaranteed to be empty; so nothing to do. |
| } else { |
| destroy_slots(); |
| ClearBackingArray(common(), GetPolicyFunctions(), |
| /*reuse=*/cap < 128); |
| } |
| common().set_reserved_growth(0); |
| } |
| |
| inline void destroy_slots() { |
| const size_t cap = capacity(); |
| const ctrl_t* ctrl = control(); |
| slot_type* slot = slot_array(); |
| for (size_t i = 0; i != cap; ++i) { |
| if (IsFull(ctrl[i])) { |
| PolicyTraits::destroy(&alloc_ref(), slot + i); |
| } |
| } |
| } |
| |
| // This overload kicks in when the argument is an rvalue of insertable and |
| // decomposable type other than init_type. |
| // |
| // flat_hash_map<std::string, int> m; |
| // m.insert(std::make_pair("abc", 42)); |
| // TODO(cheshire): A type alias T2 is introduced as a workaround for the nvcc |
| // bug. |
| template <class T, RequiresInsertable<T> = 0, class T2 = T, |
| typename std::enable_if<IsDecomposable<T2>::value, int>::type = 0, |
| T* = nullptr> |
| std::pair<iterator, bool> insert(T&& value) { |
| return emplace(std::forward<T>(value)); |
| } |
| |
| // This overload kicks in when the argument is a bitfield or an lvalue of |
| // insertable and decomposable type. |
| // |
| // union { int n : 1; }; |
| // flat_hash_set<int> s; |
| // s.insert(n); |
| // |
| // flat_hash_set<std::string> s; |
| // const char* p = "hello"; |
| // s.insert(p); |
| // |
| template < |
| class T, RequiresInsertable<const T&> = 0, |
| typename std::enable_if<IsDecomposable<const T&>::value, int>::type = 0> |
| std::pair<iterator, bool> insert(const T& value) { |
| return emplace(value); |
| } |
| |
| // This overload kicks in when the argument is an rvalue of init_type. Its |
| // purpose is to handle brace-init-list arguments. |
| // |
| // flat_hash_map<std::string, int> s; |
| // s.insert({"abc", 42}); |
| std::pair<iterator, bool> insert(init_type&& value) { |
| return emplace(std::move(value)); |
| } |
| |
| // TODO(cheshire): A type alias T2 is introduced as a workaround for the nvcc |
| // bug. |
| template <class T, RequiresInsertable<T> = 0, class T2 = T, |
| typename std::enable_if<IsDecomposable<T2>::value, int>::type = 0, |
| T* = nullptr> |
| iterator insert(const_iterator, T&& value) { |
| return insert(std::forward<T>(value)).first; |
| } |
| |
| template < |
| class T, RequiresInsertable<const T&> = 0, |
| typename std::enable_if<IsDecomposable<const T&>::value, int>::type = 0> |
| iterator insert(const_iterator, const T& value) { |
| return insert(value).first; |
| } |
| |
| iterator insert(const_iterator, init_type&& value) { |
| return insert(std::move(value)).first; |
| } |
| |
| template <class InputIt> |
| void insert(InputIt first, InputIt last) { |
| for (; first != last; ++first) emplace(*first); |
| } |
| |
| template <class T, RequiresNotInit<T> = 0, RequiresInsertable<const T&> = 0> |
| void insert(std::initializer_list<T> ilist) { |
| insert(ilist.begin(), ilist.end()); |
| } |
| |
| void insert(std::initializer_list<init_type> ilist) { |
| insert(ilist.begin(), ilist.end()); |
| } |
| |
| insert_return_type insert(node_type&& node) { |
| if (!node) return {end(), false, node_type()}; |
| const auto& elem = PolicyTraits::element(CommonAccess::GetSlot(node)); |
| auto res = PolicyTraits::apply( |
| InsertSlot<false>{*this, std::move(*CommonAccess::GetSlot(node))}, |
| elem); |
| if (res.second) { |
| CommonAccess::Reset(&node); |
| return {res.first, true, node_type()}; |
| } else { |
| return {res.first, false, std::move(node)}; |
| } |
| } |
| |
| iterator insert(const_iterator, node_type&& node) { |
| auto res = insert(std::move(node)); |
| node = std::move(res.node); |
| return res.position; |
| } |
| |
| // This overload kicks in if we can deduce the key from args. This enables us |
| // to avoid constructing value_type if an entry with the same key already |
| // exists. |
| // |
| // For example: |
| // |
| // flat_hash_map<std::string, std::string> m = {{"abc", "def"}}; |
| // // Creates no std::string copies and makes no heap allocations. |
| // m.emplace("abc", "xyz"); |
| template <class... Args, typename std::enable_if< |
| IsDecomposable<Args...>::value, int>::type = 0> |
| std::pair<iterator, bool> emplace(Args&&... args) { |
| return PolicyTraits::apply(EmplaceDecomposable{*this}, |
| std::forward<Args>(args)...); |
| } |
| |
| // This overload kicks in if we cannot deduce the key from args. It constructs |
| // value_type unconditionally and then either moves it into the table or |
| // destroys. |
| template <class... Args, typename std::enable_if< |
| !IsDecomposable<Args...>::value, int>::type = 0> |
| std::pair<iterator, bool> emplace(Args&&... args) { |
| alignas(slot_type) unsigned char raw[sizeof(slot_type)]; |
| slot_type* slot = reinterpret_cast<slot_type*>(&raw); |
| |
| PolicyTraits::construct(&alloc_ref(), slot, std::forward<Args>(args)...); |
| const auto& elem = PolicyTraits::element(slot); |
| return PolicyTraits::apply(InsertSlot<true>{*this, std::move(*slot)}, elem); |
| } |
| |
| template <class... Args> |
| iterator emplace_hint(const_iterator, Args&&... args) { |
| return emplace(std::forward<Args>(args)...).first; |
| } |
| |
| // Extension API: support for lazy emplace. |
| // |
| // Looks up key in the table. If found, returns the iterator to the element. |
| // Otherwise calls `f` with one argument of type `raw_hash_set::constructor`. |
| // |
| // `f` must abide by several restrictions: |
| // - it MUST call `raw_hash_set::constructor` with arguments as if a |
| // `raw_hash_set::value_type` is constructed, |
| // - it MUST NOT access the container before the call to |
| // `raw_hash_set::constructor`, and |
| // - it MUST NOT erase the lazily emplaced element. |
| // Doing any of these is undefined behavior. |
| // |
| // For example: |
| // |
| // std::unordered_set<ArenaString> s; |
| // // Makes ArenaStr even if "abc" is in the map. |
| // s.insert(ArenaString(&arena, "abc")); |
| // |
| // flat_hash_set<ArenaStr> s; |
| // // Makes ArenaStr only if "abc" is not in the map. |
| // s.lazy_emplace("abc", [&](const constructor& ctor) { |
| // ctor(&arena, "abc"); |
| // }); |
| // |
| // WARNING: This API is currently experimental. If there is a way to implement |
| // the same thing with the rest of the API, prefer that. |
| class constructor { |
| friend class raw_hash_set; |
| |
| public: |
| template <class... Args> |
| void operator()(Args&&... args) const { |
| assert(*slot_); |
| PolicyTraits::construct(alloc_, *slot_, std::forward<Args>(args)...); |
| *slot_ = nullptr; |
| } |
| |
| private: |
| constructor(allocator_type* a, slot_type** slot) : alloc_(a), slot_(slot) {} |
| |
| allocator_type* alloc_; |
| slot_type** slot_; |
| }; |
| |
| template <class K = key_type, class F> |
| iterator lazy_emplace(const key_arg<K>& key, F&& f) { |
| auto res = find_or_prepare_insert(key); |
| if (res.second) { |
| slot_type* slot = slot_array() + res.first; |
| std::forward<F>(f)(constructor(&alloc_ref(), &slot)); |
| assert(!slot); |
| } |
| return iterator_at(res.first); |
| } |
| |
| // Extension API: support for heterogeneous keys. |
| // |
| // std::unordered_set<std::string> s; |
| // // Turns "abc" into std::string. |
| // s.erase("abc"); |
| // |
| // flat_hash_set<std::string> s; |
| // // Uses "abc" directly without copying it into std::string. |
| // s.erase("abc"); |
| template <class K = key_type> |
| size_type erase(const key_arg<K>& key) { |
| auto it = find(key); |
| if (it == end()) return 0; |
| erase(it); |
| return 1; |
| } |
| |
| // Erases the element pointed to by `it`. Unlike `std::unordered_set::erase`, |
| // this method returns void to reduce algorithmic complexity to O(1). The |
| // iterator is invalidated, so any increment should be done before calling |
| // erase. In order to erase while iterating across a map, use the following |
| // idiom (which also works for standard containers): |
| // |
| // for (auto it = m.begin(), end = m.end(); it != end;) { |
| // // `erase()` will invalidate `it`, so advance `it` first. |
| // auto copy_it = it++; |
| // if (<pred>) { |
| // m.erase(copy_it); |
| // } |
| // } |
| void erase(const_iterator cit) { erase(cit.inner_); } |
| |
| // This overload is necessary because otherwise erase<K>(const K&) would be |
| // a better match if non-const iterator is passed as an argument. |
| void erase(iterator it) { |
| AssertIsFull(it.ctrl_, it.generation(), it.generation_ptr(), "erase()"); |
| PolicyTraits::destroy(&alloc_ref(), it.slot_); |
| erase_meta_only(it); |
| } |
| |
| iterator erase(const_iterator first, const_iterator last) { |
| while (first != last) { |
| erase(first++); |
| } |
| return last.inner_; |
| } |
| |
| // Moves elements from `src` into `this`. |
| // If the element already exists in `this`, it is left unmodified in `src`. |
| template <typename H, typename E> |
| void merge(raw_hash_set<Policy, H, E, Alloc>& src) { // NOLINT |
| assert(this != &src); |
| for (auto it = src.begin(), e = src.end(); it != e;) { |
| auto next = std::next(it); |
| if (PolicyTraits::apply(InsertSlot<false>{*this, std::move(*it.slot_)}, |
| PolicyTraits::element(it.slot_)) |
| .second) { |
| src.erase_meta_only(it); |
| } |
| it = next; |
| } |
| } |
| |
| template <typename H, typename E> |
| void merge(raw_hash_set<Policy, H, E, Alloc>&& src) { |
| merge(src); |
| } |
| |
| node_type extract(const_iterator position) { |
| AssertIsFull(position.inner_.ctrl_, position.inner_.generation(), |
| position.inner_.generation_ptr(), "extract()"); |
| auto node = |
| CommonAccess::Transfer<node_type>(alloc_ref(), position.inner_.slot_); |
| erase_meta_only(position); |
| return node; |
| } |
| |
| template < |
| class K = key_type, |
| typename std::enable_if<!std::is_same<K, iterator>::value, int>::type = 0> |
| node_type extract(const key_arg<K>& key) { |
| auto it = find(key); |
| return it == end() ? node_type() : extract(const_iterator{it}); |
| } |
| |
| void swap(raw_hash_set& that) noexcept( |
| IsNoThrowSwappable<hasher>() && IsNoThrowSwappable<key_equal>() && |
| IsNoThrowSwappable<allocator_type>( |
| typename AllocTraits::propagate_on_container_swap{})) { |
| using std::swap; |
| swap(common(), that.common()); |
| swap(hash_ref(), that.hash_ref()); |
| swap(eq_ref(), that.eq_ref()); |
| SwapAlloc(alloc_ref(), that.alloc_ref(), |
| typename AllocTraits::propagate_on_container_swap{}); |
| } |
| |
| void rehash(size_t n) { |
| if (n == 0 && capacity() == 0) return; |
| if (n == 0 && size() == 0) { |
| ClearBackingArray(common(), GetPolicyFunctions(), |
| /*reuse=*/false); |
| return; |
| } |
| |
| // bitor is a faster way of doing `max` here. We will round up to the next |
| // power-of-2-minus-1, so bitor is good enough. |
| auto m = NormalizeCapacity(n | GrowthToLowerboundCapacity(size())); |
| // n == 0 unconditionally rehashes as per the standard. |
| if (n == 0 || m > capacity()) { |
| resize(m); |
| |
| // This is after resize, to ensure that we have completed the allocation |
| // and have potentially sampled the hashtable. |
| infoz().RecordReservation(n); |
| } |
| } |
| |
| void reserve(size_t n) { |
| if (n > size() + growth_left()) { |
| size_t m = GrowthToLowerboundCapacity(n); |
| resize(NormalizeCapacity(m)); |
| |
| // This is after resize, to ensure that we have completed the allocation |
| // and have potentially sampled the hashtable. |
| infoz().RecordReservation(n); |
| } |
| common().reset_reserved_growth(n); |
| } |
| |
| // Extension API: support for heterogeneous keys. |
| // |
| // std::unordered_set<std::string> s; |
| // // Turns "abc" into std::string. |
| // s.count("abc"); |
| // |
| // ch_set<std::string> s; |
| // // Uses "abc" directly without copying it into std::string. |
| // s.count("abc"); |
| template <class K = key_type> |
| size_t count(const key_arg<K>& key) const { |
| return find(key) == end() ? 0 : 1; |
| } |
| |
| // Issues CPU prefetch instructions for the memory needed to find or insert |
| // a key. Like all lookup functions, this support heterogeneous keys. |
| // |
| // NOTE: This is a very low level operation and should not be used without |
| // specific benchmarks indicating its importance. |
| template <class K = key_type> |
| void prefetch(const key_arg<K>& key) const { |
| (void)key; |
| // Avoid probing if we won't be able to prefetch the addresses received. |
| #ifdef ABSL_HAVE_PREFETCH |
| prefetch_heap_block(); |
| auto seq = probe(common(), hash_ref()(key)); |
| PrefetchToLocalCache(control() + seq.offset()); |
| PrefetchToLocalCache(slot_array() + seq.offset()); |
| #endif // ABSL_HAVE_PREFETCH |
| } |
| |
| // The API of find() has two extensions. |
| // |
| // 1. The hash can be passed by the user. It must be equal to the hash of the |
| // key. |
| // |
| // 2. The type of the key argument doesn't have to be key_type. This is so |
| // called heterogeneous key support. |
| template <class K = key_type> |
| iterator find(const key_arg<K>& key, size_t hash) { |
| auto seq = probe(common(), hash); |
| slot_type* slot_ptr = slot_array(); |
| const ctrl_t* ctrl = control(); |
| while (true) { |
| Group g{ctrl + seq.offset()}; |
| for (uint32_t i : g.Match(H2(hash))) { |
| if (ABSL_PREDICT_TRUE(PolicyTraits::apply( |
| EqualElement<K>{key, eq_ref()}, |
| PolicyTraits::element(slot_ptr + seq.offset(i))))) |
| return iterator_at(seq.offset(i)); |
| } |
| if (ABSL_PREDICT_TRUE(g.MaskEmpty())) return end(); |
| seq.next(); |
| assert(seq.index() <= capacity() && "full table!"); |
| } |
| } |
| template <class K = key_type> |
| iterator find(const key_arg<K>& key) { |
| prefetch_heap_block(); |
| return find(key, hash_ref()(key)); |
| } |
| |
| template <class K = key_type> |
| const_iterator find(const key_arg<K>& key, size_t hash) const { |
| return const_cast<raw_hash_set*>(this)->find(key, hash); |
| } |
| template <class K = key_type> |
| const_iterator find(const key_arg<K>& key) const { |
| prefetch_heap_block(); |
| return find(key, hash_ref()(key)); |
| } |
| |
| template <class K = key_type> |
| bool contains(const key_arg<K>& key) const { |
| return find(key) != end(); |
| } |
| |
| template <class K = key_type> |
| std::pair<iterator, iterator> equal_range(const key_arg<K>& key) { |
| auto it = find(key); |
| if (it != end()) return {it, std::next(it)}; |
| return {it, it}; |
| } |
| template <class K = key_type> |
| std::pair<const_iterator, const_iterator> equal_range( |
| const key_arg<K>& key) const { |
| auto it = find(key); |
| if (it != end()) return {it, std::next(it)}; |
| return {it, it}; |
| } |
| |
| size_t bucket_count() const { return capacity(); } |
| float load_factor() const { |
| return capacity() ? static_cast<double>(size()) / capacity() : 0.0; |
| } |
| float max_load_factor() const { return 1.0f; } |
| void max_load_factor(float) { |
| // Does nothing. |
| } |
| |
| hasher hash_function() const { return hash_ref(); } |
| key_equal key_eq() const { return eq_ref(); } |
| allocator_type get_allocator() const { return alloc_ref(); } |
| |
| friend bool operator==(const raw_hash_set& a, const raw_hash_set& b) { |
| if (a.size() != b.size()) return false; |
| const raw_hash_set* outer = &a; |
| const raw_hash_set* inner = &b; |
| if (outer->capacity() > inner->capacity()) std::swap(outer, inner); |
| for (const value_type& elem : *outer) |
| if (!inner->has_element(elem)) return false; |
| return true; |
| } |
| |
| friend bool operator!=(const raw_hash_set& a, const raw_hash_set& b) { |
| return !(a == b); |
| } |
| |
| template <typename H> |
| friend typename std::enable_if<H::template is_hashable<value_type>::value, |
| H>::type |
| AbslHashValue(H h, const raw_hash_set& s) { |
| return H::combine(H::combine_unordered(std::move(h), s.begin(), s.end()), |
| s.size()); |
| } |
| |
| friend void swap(raw_hash_set& a, |
| raw_hash_set& b) noexcept(noexcept(a.swap(b))) { |
| a.swap(b); |
| } |
| |
| private: |
| template <class Container, typename Enabler> |
| friend struct absl::container_internal::hashtable_debug_internal:: |
| HashtableDebugAccess; |
| |
| struct FindElement { |
| template <class K, class... Args> |
| const_iterator operator()(const K& key, Args&&...) const { |
| return s.find(key); |
| } |
| const raw_hash_set& s; |
| }; |
| |
| struct HashElement { |
| template <class K, class... Args> |
| size_t operator()(const K& key, Args&&...) const { |
| return h(key); |
| } |
| const hasher& h; |
| }; |
| |
| template <class K1> |
| struct EqualElement { |
| template <class K2, class... Args> |
| bool operator()(const K2& lhs, Args&&...) const { |
| return eq(lhs, rhs); |
| } |
| const K1& rhs; |
| const key_equal& eq; |
| }; |
| |
| struct EmplaceDecomposable { |
| template <class K, class... Args> |
| std::pair<iterator, bool> operator()(const K& key, Args&&... args) const { |
| auto res = s.find_or_prepare_insert(key); |
| if (res.second) { |
| s.emplace_at(res.first, std::forward<Args>(args)...); |
| } |
| return {s.iterator_at(res.first), res.second}; |
| } |
| raw_hash_set& s; |
| }; |
| |
| template <bool do_destroy> |
| struct InsertSlot { |
| template <class K, class... Args> |
| std::pair<iterator, bool> operator()(const K& key, Args&&...) && { |
| auto res = s.find_or_prepare_insert(key); |
| if (res.second) { |
| PolicyTraits::transfer(&s.alloc_ref(), s.slot_array() + res.first, |
| &slot); |
| } else if (do_destroy) { |
| PolicyTraits::destroy(&s.alloc_ref(), &slot); |
| } |
| return {s.iterator_at(res.first), res.second}; |
| } |
| raw_hash_set& s; |
| // Constructed slot. Either moved into place or destroyed. |
| slot_type&& slot; |
| }; |
| |
| // Erases, but does not destroy, the value pointed to by `it`. |
| // |
| // This merely updates the pertinent control byte. This can be used in |
| // conjunction with Policy::transfer to move the object to another place. |
| void erase_meta_only(const_iterator it) { |
| EraseMetaOnly(common(), it.inner_.ctrl_, sizeof(slot_type)); |
| } |
| |
| // Allocates a backing array for `self` and initializes its control bytes. |
| // This reads `capacity` and updates all other fields based on the result of |
| // the allocation. |
| // |
| // This does not free the currently held array; `capacity` must be nonzero. |
| inline void initialize_slots() { |
| // People are often sloppy with the exact type of their allocator (sometimes |
| // it has an extra const or is missing the pair, but rebinds made it work |
| // anyway). |
| using CharAlloc = |
| typename absl::allocator_traits<Alloc>::template rebind_alloc<char>; |
| InitializeSlots<CharAlloc, sizeof(slot_type), alignof(slot_type)>( |
| common(), CharAlloc(alloc_ref())); |
| } |
| |
| ABSL_ATTRIBUTE_NOINLINE void resize(size_t new_capacity) { |
| assert(IsValidCapacity(new_capacity)); |
| auto* old_ctrl = control(); |
| auto* old_slots = slot_array(); |
| const size_t old_capacity = common().capacity_; |
| common().capacity_ = new_capacity; |
| initialize_slots(); |
| |
| auto* new_slots = slot_array(); |
| size_t total_probe_length = 0; |
| for (size_t i = 0; i != old_capacity; ++i) { |
| if (IsFull(old_ctrl[i])) { |
| size_t hash = PolicyTraits::apply(HashElement{hash_ref()}, |
| PolicyTraits::element(old_slots + i)); |
| auto target = find_first_non_full(common(), hash); |
| size_t new_i = target.offset; |
| total_probe_length += target.probe_length; |
| SetCtrl(common(), new_i, H2(hash), sizeof(slot_type)); |
| PolicyTraits::transfer(&alloc_ref(), new_slots + new_i, old_slots + i); |
| } |
| } |
| if (old_capacity) { |
| SanitizerUnpoisonMemoryRegion(old_slots, |
| sizeof(slot_type) * old_capacity); |
| Deallocate<alignof(slot_type)>( |
| &alloc_ref(), old_ctrl, |
| AllocSize(old_capacity, sizeof(slot_type), alignof(slot_type))); |
| } |
| infoz().RecordRehash(total_probe_length); |
| } |
| |
| // Prunes control bytes to remove as many tombstones as possible. |
| // |
| // See the comment on `rehash_and_grow_if_necessary()`. |
| inline void drop_deletes_without_resize() { |
| // Stack-allocate space for swapping elements. |
| alignas(slot_type) unsigned char tmp[sizeof(slot_type)]; |
| DropDeletesWithoutResize(common(), GetPolicyFunctions(), tmp); |
| } |
| |
| // Called whenever the table *might* need to conditionally grow. |
| // |
| // This function is an optimization opportunity to perform a rehash even when |
| // growth is unnecessary, because vacating tombstones is beneficial for |
| // performance in the long-run. |
| void rehash_and_grow_if_necessary() { |
| const size_t cap = capacity(); |
| if (cap > Group::kWidth && |
| // Do these calcuations in 64-bit to avoid overflow. |
| size() * uint64_t{32} <= cap* uint64_t{25}) { |
| // Squash DELETED without growing if there is enough capacity. |
| // |
| // Rehash in place if the current size is <= 25/32 of capacity. |
| // Rationale for such a high factor: 1) drop_deletes_without_resize() is |
| // faster than resize, and 2) it takes quite a bit of work to add |
| // tombstones. In the worst case, seems to take approximately 4 |
| // insert/erase pairs to create a single tombstone and so if we are |
| // rehashing because of tombstones, we can afford to rehash-in-place as |
| // long as we are reclaiming at least 1/8 the capacity without doing more |
| // than 2X the work. (Where "work" is defined to be size() for rehashing |
| // or rehashing in place, and 1 for an insert or erase.) But rehashing in |
| // place is faster per operation than inserting or even doubling the size |
| // of the table, so we actually afford to reclaim even less space from a |
| // resize-in-place. The decision is to rehash in place if we can reclaim |
| // at about 1/8th of the usable capacity (specifically 3/28 of the |
| // capacity) which means that the total cost of rehashing will be a small |
| // fraction of the total work. |
| // |
| // Here is output of an experiment using the BM_CacheInSteadyState |
| // benchmark running the old case (where we rehash-in-place only if we can |
| // reclaim at least 7/16*capacity) vs. this code (which rehashes in place |
| // if we can recover 3/32*capacity). |
| // |
| // Note that although in the worst-case number of rehashes jumped up from |
| // 15 to 190, but the number of operations per second is almost the same. |
| // |
| // Abridged output of running BM_CacheInSteadyState benchmark from |
| // raw_hash_set_benchmark. N is the number of insert/erase operations. |
| // |
| // | OLD (recover >= 7/16 | NEW (recover >= 3/32) |
| // size | N/s LoadFactor NRehashes | N/s LoadFactor NRehashes |
| // 448 | 145284 0.44 18 | 140118 0.44 19 |
| // 493 | 152546 0.24 11 | 151417 0.48 28 |
| // 538 | 151439 0.26 11 | 151152 0.53 38 |
| // 583 | 151765 0.28 11 | 150572 0.57 50 |
| // 628 | 150241 0.31 11 | 150853 0.61 66 |
| // 672 | 149602 0.33 12 | 150110 0.66 90 |
| // 717 | 149998 0.35 12 | 149531 0.70 129 |
| // 762 | 149836 0.37 13 | 148559 0.74 190 |
| // 807 | 149736 0.39 14 | 151107 0.39 14 |
| // 852 | 150204 0.42 15 | 151019 0.42 15 |
| drop_deletes_without_resize(); |
| } else { |
| // Otherwise grow the container. |
| resize(NextCapacity(cap)); |
| } |
| } |
| |
| bool has_element(const value_type& elem) const { |
| size_t hash = PolicyTraits::apply(HashElement{hash_ref()}, elem); |
| auto seq = probe(common(), hash); |
| const ctrl_t* ctrl = control(); |
| while (true) { |
| Group g{ctrl + seq.offset()}; |
| for (uint32_t i : g.Match(H2(hash))) { |
| if (ABSL_PREDICT_TRUE( |
| PolicyTraits::element(slot_array() + seq.offset(i)) == elem)) |
| return true; |
| } |
| if (ABSL_PREDICT_TRUE(g.MaskEmpty())) return false; |
| seq.next(); |
| assert(seq.index() <= capacity() && "full table!"); |
| } |
| return false; |
| } |
| |
| // TODO(alkis): Optimize this assuming *this and that don't overlap. |
| raw_hash_set& move_assign(raw_hash_set&& that, std::true_type) { |
| raw_hash_set tmp(std::move(that)); |
| swap(tmp); |
| return *this; |
| } |
| raw_hash_set& move_assign(raw_hash_set&& that, std::false_type) { |
| raw_hash_set tmp(std::move(that), alloc_ref()); |
| swap(tmp); |
| return *this; |
| } |
| |
| protected: |
| // Attempts to find `key` in the table; if it isn't found, returns a slot that |
| // the value can be inserted into, with the control byte already set to |
| // `key`'s H2. |
| template <class K> |
| std::pair<size_t, bool> find_or_prepare_insert(const K& key) { |
| prefetch_heap_block(); |
| auto hash = hash_ref()(key); |
| auto seq = probe(common(), hash); |
| const ctrl_t* ctrl = control(); |
| while (true) { |
| Group g{ctrl + seq.offset()}; |
| for (uint32_t i : g.Match(H2(hash))) { |
| if (ABSL_PREDICT_TRUE(PolicyTraits::apply( |
| EqualElement<K>{key, eq_ref()}, |
| PolicyTraits::element(slot_array() + seq.offset(i))))) |
| return {seq.offset(i), false}; |
| } |
| if (ABSL_PREDICT_TRUE(g.MaskEmpty())) break; |
| seq.next(); |
| assert(seq.index() <= capacity() && "full table!"); |
| } |
| return {prepare_insert(hash), true}; |
| } |
| |
| // Given the hash of a value not currently in the table, finds the next |
| // viable slot index to insert it at. |
| // |
| // REQUIRES: At least one non-full slot available. |
| size_t prepare_insert(size_t hash) ABSL_ATTRIBUTE_NOINLINE { |
| const bool rehash_for_bug_detection = |
| common().should_rehash_for_bug_detection_on_insert(); |
| if (rehash_for_bug_detection) { |
| // Move to a different heap allocation in order to detect bugs. |
| const size_t cap = capacity(); |
| resize(growth_left() > 0 ? cap : NextCapacity(cap)); |
| } |
| auto target = find_first_non_full(common(), hash); |
| if (!rehash_for_bug_detection && |
| ABSL_PREDICT_FALSE(growth_left() == 0 && |
| !IsDeleted(control()[target.offset]))) { |
| rehash_and_grow_if_necessary(); |
| target = find_first_non_full(common(), hash); |
| } |
| ++common().size_; |
| growth_left() -= IsEmpty(control()[target.offset]); |
| SetCtrl(common(), target.offset, H2(hash), sizeof(slot_type)); |
| common().maybe_increment_generation_on_insert(); |
| infoz().RecordInsert(hash, target.probe_length); |
| return target.offset; |
| } |
| |
| // Constructs the value in the space pointed by the iterator. This only works |
| // after an unsuccessful find_or_prepare_insert() and before any other |
| // modifications happen in the raw_hash_set. |
| // |
| // PRECONDITION: i is an index returned from find_or_prepare_insert(k), where |
| // k is the key decomposed from `forward<Args>(args)...`, and the bool |
| // returned by find_or_prepare_insert(k) was true. |
| // POSTCONDITION: *m.iterator_at(i) == value_type(forward<Args>(args)...). |
| template <class... Args> |
| void emplace_at(size_t i, Args&&... args) { |
| PolicyTraits::construct(&alloc_ref(), slot_array() + i, |
| std::forward<Args>(args)...); |
| |
| assert(PolicyTraits::apply(FindElement{*this}, *iterator_at(i)) == |
| iterator_at(i) && |
| "constructed value does not match the lookup key"); |
| } |
| |
| iterator iterator_at(size_t i) { |
| return {control() + i, slot_array() + i, common().generation_ptr()}; |
| } |
| const_iterator iterator_at(size_t i) const { |
| return {control() + i, slot_array() + i, common().generation_ptr()}; |
| } |
| |
| private: |
| friend struct RawHashSetTestOnlyAccess; |
| |
| // The number of slots we can still fill without needing to rehash. |
| // |
| // This is stored separately due to tombstones: we do not include tombstones |
| // in the growth capacity, because we'd like to rehash when the table is |
| // otherwise filled with tombstones: otherwise, probe sequences might get |
| // unacceptably long without triggering a rehash. Callers can also force a |
| // rehash via the standard `rehash(0)`, which will recompute this value as a |
| // side-effect. |
| // |
| // See `CapacityToGrowth()`. |
| size_t& growth_left() { return common().growth_left(); } |
| |
| // Prefetch the heap-allocated memory region to resolve potential TLB and |
| // cache misses. This is intended to overlap with execution of calculating the |
| // hash for a key. |
| void prefetch_heap_block() const { |
| #if ABSL_HAVE_BUILTIN(__builtin_prefetch) || defined(__GNUC__) |
| __builtin_prefetch(control(), 0, 1); |
| #endif |
| } |
| |
| CommonFields& common() { return settings_.template get<0>(); } |
| const CommonFields& common() const { return settings_.template get<0>(); } |
| |
| ctrl_t* control() const { return common().control_; } |
| slot_type* slot_array() const { |
| return static_cast<slot_type*>(common().slots_); |
| } |
| HashtablezInfoHandle& infoz() { return common().infoz(); } |
| |
| hasher& hash_ref() { return settings_.template get<1>(); } |
| const hasher& hash_ref() const { return settings_.template get<1>(); } |
| key_equal& eq_ref() { return settings_.template get<2>(); } |
| const key_equal& eq_ref() const { return settings_.template get<2>(); } |
| allocator_type& alloc_ref() { return settings_.template get<3>(); } |
| const allocator_type& alloc_ref() const { |
| return settings_.template get<3>(); |
| } |
| |
| // Make type-specific functions for this type's PolicyFunctions struct. |
| static size_t hash_slot_fn(void* set, void* slot) { |
| auto* h = static_cast<raw_hash_set*>(set); |
| return PolicyTraits::apply( |
| HashElement{h->hash_ref()}, |
| PolicyTraits::element(static_cast<slot_type*>(slot))); |
| } |
| static void transfer_slot_fn(void* set, void* dst, void* src) { |
| auto* h = static_cast<raw_hash_set*>(set); |
| PolicyTraits::transfer(&h->alloc_ref(), static_cast<slot_type*>(dst), |
| static_cast<slot_type*>(src)); |
| } |
| // Note: dealloc_fn will only be used if we have a non-standard allocator. |
| static void dealloc_fn(void* set, const PolicyFunctions&, ctrl_t* ctrl, |
| void* slot_mem, size_t n) { |
| auto* h = static_cast<raw_hash_set*>(set); |
| |
| // Unpoison before returning the memory to the allocator. |
| SanitizerUnpoisonMemoryRegion(slot_mem, sizeof(slot_type) * n); |
| |
| Deallocate<alignof(slot_type)>( |
| &h->alloc_ref(), ctrl, |
| AllocSize(n, sizeof(slot_type), alignof(slot_type))); |
| } |
| |
| static const PolicyFunctions& GetPolicyFunctions() { |
| static constexpr PolicyFunctions value = { |
| sizeof(slot_type), |
| &raw_hash_set::hash_slot_fn, |
| PolicyTraits::transfer_uses_memcpy() |
| ? TransferRelocatable<sizeof(slot_type)> |
| : &raw_hash_set::transfer_slot_fn, |
| (std::is_same<SlotAlloc, std::allocator<slot_type>>::value |
| ? &DeallocateStandard<alignof(slot_type)> |
| : &raw_hash_set::dealloc_fn), |
| }; |
| return value; |
| } |
| |
| // Bundle together CommonFields plus other objects which might be empty. |
| // CompressedTuple will ensure that sizeof is not affected by any of the empty |
| // fields that occur after CommonFields. |
| absl::container_internal::CompressedTuple<CommonFields, hasher, key_equal, |
| allocator_type> |
| settings_{CommonFields{}, hasher{}, key_equal{}, allocator_type{}}; |
| }; |
| |
| // Erases all elements that satisfy the predicate `pred` from the container `c`. |
| template <typename P, typename H, typename E, typename A, typename Predicate> |
| typename raw_hash_set<P, H, E, A>::size_type EraseIf( |
| Predicate& pred, raw_hash_set<P, H, E, A>* c) { |
| const auto initial_size = c->size(); |
| for (auto it = c->begin(), last = c->end(); it != last;) { |
| if (pred(*it)) { |
| c->erase(it++); |
| } else { |
| ++it; |
| } |
| } |
| return initial_size - c->size(); |
| } |
| |
| namespace hashtable_debug_internal { |
| template <typename Set> |
| struct HashtableDebugAccess<Set, absl::void_t<typename Set::raw_hash_set>> { |
| using Traits = typename Set::PolicyTraits; |
| using Slot = typename Traits::slot_type; |
| |
| static size_t GetNumProbes(const Set& set, |
| const typename Set::key_type& key) { |
| size_t num_probes = 0; |
| size_t hash = set.hash_ref()(key); |
| auto seq = probe(set.common(), hash); |
| const ctrl_t* ctrl = set.control(); |
| while (true) { |
| container_internal::Group g{ctrl + seq.offset()}; |
| for (uint32_t i : g.Match(container_internal::H2(hash))) { |
| if (Traits::apply( |
| typename Set::template EqualElement<typename Set::key_type>{ |
| key, set.eq_ref()}, |
| Traits::element(set.slot_array() + seq.offset(i)))) |
| return num_probes; |
| ++num_probes; |
| } |
| if (g.MaskEmpty()) return num_probes; |
| seq.next(); |
| ++num_probes; |
| } |
| } |
| |
| static size_t AllocatedByteSize(const Set& c) { |
| size_t capacity = c.capacity(); |
| if (capacity == 0) return 0; |
| size_t m = AllocSize(capacity, sizeof(Slot), alignof(Slot)); |
| |
| size_t per_slot = Traits::space_used(static_cast<const Slot*>(nullptr)); |
| if (per_slot != ~size_t{}) { |
| m += per_slot * c.size(); |
| } else { |
| const ctrl_t* ctrl = c.control(); |
| for (size_t i = 0; i != capacity; ++i) { |
| if (container_internal::IsFull(ctrl[i])) { |
| m += Traits::space_used(c.slot_array() + i); |
| } |
| } |
| } |
| return m; |
| } |
| |
| static size_t LowerBoundAllocatedByteSize(size_t size) { |
| size_t capacity = GrowthToLowerboundCapacity(size); |
| if (capacity == 0) return 0; |
| size_t m = |
| AllocSize(NormalizeCapacity(capacity), sizeof(Slot), alignof(Slot)); |
| size_t per_slot = Traits::space_used(static_cast<const Slot*>(nullptr)); |
| if (per_slot != ~size_t{}) { |
| m += per_slot * size; |
| } |
| return m; |
| } |
| }; |
| |
| } // namespace hashtable_debug_internal |
| } // namespace container_internal |
| ABSL_NAMESPACE_END |
| } // namespace absl |
| |
| #undef ABSL_SWISSTABLE_ENABLE_GENERATIONS |
| |
| #endif // ABSL_CONTAINER_INTERNAL_RAW_HASH_SET_H_ |