| // Copyright 2017 The Abseil Authors. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // https://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "absl/strings/ascii.h" |
| |
| #include <climits> |
| #include <cstring> |
| #include <string> |
| |
| namespace absl { |
| ABSL_NAMESPACE_BEGIN |
| namespace ascii_internal { |
| |
| // # Table generated by this Python code (bit 0x02 is currently unused): |
| // TODO(mbar) Move Python code for generation of table to BUILD and link here. |
| |
| // NOTE: The kAsciiPropertyBits table used within this code was generated by |
| // Python code of the following form. (Bit 0x02 is currently unused and |
| // available.) |
| // |
| // def Hex2(n): |
| // return '0x' + hex(n/16)[2:] + hex(n%16)[2:] |
| // def IsPunct(ch): |
| // return (ord(ch) >= 32 and ord(ch) < 127 and |
| // not ch.isspace() and not ch.isalnum()) |
| // def IsBlank(ch): |
| // return ch in ' \t' |
| // def IsCntrl(ch): |
| // return ord(ch) < 32 or ord(ch) == 127 |
| // def IsXDigit(ch): |
| // return ch.isdigit() or ch.lower() in 'abcdef' |
| // for i in range(128): |
| // ch = chr(i) |
| // mask = ((ch.isalpha() and 0x01 or 0) | |
| // (ch.isalnum() and 0x04 or 0) | |
| // (ch.isspace() and 0x08 or 0) | |
| // (IsPunct(ch) and 0x10 or 0) | |
| // (IsBlank(ch) and 0x20 or 0) | |
| // (IsCntrl(ch) and 0x40 or 0) | |
| // (IsXDigit(ch) and 0x80 or 0)) |
| // print Hex2(mask) + ',', |
| // if i % 16 == 7: |
| // print ' //', Hex2(i & 0x78) |
| // elif i % 16 == 15: |
| // print |
| |
| // clang-format off |
| // Array of bitfields holding character information. Each bit value corresponds |
| // to a particular character feature. For readability, and because the value |
| // of these bits is tightly coupled to this implementation, the individual bits |
| // are not named. Note that bitfields for all characters above ASCII 127 are |
| // zero-initialized. |
| ABSL_DLL const unsigned char kPropertyBits[256] = { |
| 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, // 0x00 |
| 0x40, 0x68, 0x48, 0x48, 0x48, 0x48, 0x40, 0x40, |
| 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, // 0x10 |
| 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, |
| 0x28, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, // 0x20 |
| 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, |
| 0x84, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84, 0x84, // 0x30 |
| 0x84, 0x84, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, |
| 0x10, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x05, // 0x40 |
| 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, |
| 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, // 0x50 |
| 0x05, 0x05, 0x05, 0x10, 0x10, 0x10, 0x10, 0x10, |
| 0x10, 0x85, 0x85, 0x85, 0x85, 0x85, 0x85, 0x05, // 0x60 |
| 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, |
| 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, // 0x70 |
| 0x05, 0x05, 0x05, 0x10, 0x10, 0x10, 0x10, 0x40, |
| }; |
| |
| // Array of characters for the ascii_tolower() function. For values 'A' |
| // through 'Z', return the lower-case character; otherwise, return the |
| // identity of the passed character. |
| ABSL_DLL const char kToLower[256] = { |
| '\x00', '\x01', '\x02', '\x03', '\x04', '\x05', '\x06', '\x07', |
| '\x08', '\x09', '\x0a', '\x0b', '\x0c', '\x0d', '\x0e', '\x0f', |
| '\x10', '\x11', '\x12', '\x13', '\x14', '\x15', '\x16', '\x17', |
| '\x18', '\x19', '\x1a', '\x1b', '\x1c', '\x1d', '\x1e', '\x1f', |
| '\x20', '\x21', '\x22', '\x23', '\x24', '\x25', '\x26', '\x27', |
| '\x28', '\x29', '\x2a', '\x2b', '\x2c', '\x2d', '\x2e', '\x2f', |
| '\x30', '\x31', '\x32', '\x33', '\x34', '\x35', '\x36', '\x37', |
| '\x38', '\x39', '\x3a', '\x3b', '\x3c', '\x3d', '\x3e', '\x3f', |
| '\x40', 'a', 'b', 'c', 'd', 'e', 'f', 'g', |
| 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', |
| 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', |
| 'x', 'y', 'z', '\x5b', '\x5c', '\x5d', '\x5e', '\x5f', |
| '\x60', '\x61', '\x62', '\x63', '\x64', '\x65', '\x66', '\x67', |
| '\x68', '\x69', '\x6a', '\x6b', '\x6c', '\x6d', '\x6e', '\x6f', |
| '\x70', '\x71', '\x72', '\x73', '\x74', '\x75', '\x76', '\x77', |
| '\x78', '\x79', '\x7a', '\x7b', '\x7c', '\x7d', '\x7e', '\x7f', |
| '\x80', '\x81', '\x82', '\x83', '\x84', '\x85', '\x86', '\x87', |
| '\x88', '\x89', '\x8a', '\x8b', '\x8c', '\x8d', '\x8e', '\x8f', |
| '\x90', '\x91', '\x92', '\x93', '\x94', '\x95', '\x96', '\x97', |
| '\x98', '\x99', '\x9a', '\x9b', '\x9c', '\x9d', '\x9e', '\x9f', |
| '\xa0', '\xa1', '\xa2', '\xa3', '\xa4', '\xa5', '\xa6', '\xa7', |
| '\xa8', '\xa9', '\xaa', '\xab', '\xac', '\xad', '\xae', '\xaf', |
| '\xb0', '\xb1', '\xb2', '\xb3', '\xb4', '\xb5', '\xb6', '\xb7', |
| '\xb8', '\xb9', '\xba', '\xbb', '\xbc', '\xbd', '\xbe', '\xbf', |
| '\xc0', '\xc1', '\xc2', '\xc3', '\xc4', '\xc5', '\xc6', '\xc7', |
| '\xc8', '\xc9', '\xca', '\xcb', '\xcc', '\xcd', '\xce', '\xcf', |
| '\xd0', '\xd1', '\xd2', '\xd3', '\xd4', '\xd5', '\xd6', '\xd7', |
| '\xd8', '\xd9', '\xda', '\xdb', '\xdc', '\xdd', '\xde', '\xdf', |
| '\xe0', '\xe1', '\xe2', '\xe3', '\xe4', '\xe5', '\xe6', '\xe7', |
| '\xe8', '\xe9', '\xea', '\xeb', '\xec', '\xed', '\xee', '\xef', |
| '\xf0', '\xf1', '\xf2', '\xf3', '\xf4', '\xf5', '\xf6', '\xf7', |
| '\xf8', '\xf9', '\xfa', '\xfb', '\xfc', '\xfd', '\xfe', '\xff', |
| }; |
| |
| // Array of characters for the ascii_toupper() function. For values 'a' |
| // through 'z', return the upper-case character; otherwise, return the |
| // identity of the passed character. |
| ABSL_DLL const char kToUpper[256] = { |
| '\x00', '\x01', '\x02', '\x03', '\x04', '\x05', '\x06', '\x07', |
| '\x08', '\x09', '\x0a', '\x0b', '\x0c', '\x0d', '\x0e', '\x0f', |
| '\x10', '\x11', '\x12', '\x13', '\x14', '\x15', '\x16', '\x17', |
| '\x18', '\x19', '\x1a', '\x1b', '\x1c', '\x1d', '\x1e', '\x1f', |
| '\x20', '\x21', '\x22', '\x23', '\x24', '\x25', '\x26', '\x27', |
| '\x28', '\x29', '\x2a', '\x2b', '\x2c', '\x2d', '\x2e', '\x2f', |
| '\x30', '\x31', '\x32', '\x33', '\x34', '\x35', '\x36', '\x37', |
| '\x38', '\x39', '\x3a', '\x3b', '\x3c', '\x3d', '\x3e', '\x3f', |
| '\x40', '\x41', '\x42', '\x43', '\x44', '\x45', '\x46', '\x47', |
| '\x48', '\x49', '\x4a', '\x4b', '\x4c', '\x4d', '\x4e', '\x4f', |
| '\x50', '\x51', '\x52', '\x53', '\x54', '\x55', '\x56', '\x57', |
| '\x58', '\x59', '\x5a', '\x5b', '\x5c', '\x5d', '\x5e', '\x5f', |
| '\x60', 'A', 'B', 'C', 'D', 'E', 'F', 'G', |
| 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', |
| 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', |
| 'X', 'Y', 'Z', '\x7b', '\x7c', '\x7d', '\x7e', '\x7f', |
| '\x80', '\x81', '\x82', '\x83', '\x84', '\x85', '\x86', '\x87', |
| '\x88', '\x89', '\x8a', '\x8b', '\x8c', '\x8d', '\x8e', '\x8f', |
| '\x90', '\x91', '\x92', '\x93', '\x94', '\x95', '\x96', '\x97', |
| '\x98', '\x99', '\x9a', '\x9b', '\x9c', '\x9d', '\x9e', '\x9f', |
| '\xa0', '\xa1', '\xa2', '\xa3', '\xa4', '\xa5', '\xa6', '\xa7', |
| '\xa8', '\xa9', '\xaa', '\xab', '\xac', '\xad', '\xae', '\xaf', |
| '\xb0', '\xb1', '\xb2', '\xb3', '\xb4', '\xb5', '\xb6', '\xb7', |
| '\xb8', '\xb9', '\xba', '\xbb', '\xbc', '\xbd', '\xbe', '\xbf', |
| '\xc0', '\xc1', '\xc2', '\xc3', '\xc4', '\xc5', '\xc6', '\xc7', |
| '\xc8', '\xc9', '\xca', '\xcb', '\xcc', '\xcd', '\xce', '\xcf', |
| '\xd0', '\xd1', '\xd2', '\xd3', '\xd4', '\xd5', '\xd6', '\xd7', |
| '\xd8', '\xd9', '\xda', '\xdb', '\xdc', '\xdd', '\xde', '\xdf', |
| '\xe0', '\xe1', '\xe2', '\xe3', '\xe4', '\xe5', '\xe6', '\xe7', |
| '\xe8', '\xe9', '\xea', '\xeb', '\xec', '\xed', '\xee', '\xef', |
| '\xf0', '\xf1', '\xf2', '\xf3', '\xf4', '\xf5', '\xf6', '\xf7', |
| '\xf8', '\xf9', '\xfa', '\xfb', '\xfc', '\xfd', '\xfe', '\xff', |
| }; |
| // clang-format on |
| |
| template <bool ToUpper> |
| constexpr void AsciiStrCaseFold(char* p, char* end) { |
| // The upper- and lowercase versions of ASCII characters differ by only 1 bit. |
| // When we need to flip the case, we can xor with this bit to achieve the |
| // desired result. Note that the choice of 'a' and 'A' here is arbitrary. We |
| // could have chosen 'z' and 'Z', or any other pair of characters as they all |
| // have the same single bit difference. |
| constexpr unsigned char kAsciiCaseBitFlip = 'a' ^ 'A'; |
| |
| constexpr char ch_a = ToUpper ? 'a' : 'A'; |
| constexpr char ch_z = ToUpper ? 'z' : 'Z'; |
| for (; p < end; ++p) { |
| unsigned char v = static_cast<unsigned char>(*p); |
| // We use & instead of && to ensure this always stays branchless |
| // We use static_cast<int> to suppress -Wbitwise-instead-of-logical |
| bool is_in_range = static_cast<bool>(static_cast<int>(ch_a <= v) & |
| static_cast<int>(v <= ch_z)); |
| v ^= is_in_range ? kAsciiCaseBitFlip : 0; |
| *p = static_cast<char>(v); |
| } |
| } |
| |
| static constexpr size_t ValidateAsciiCasefold() { |
| constexpr size_t num_chars = 1 + CHAR_MAX - CHAR_MIN; |
| size_t incorrect_index = 0; |
| char lowered[num_chars] = {}; |
| char uppered[num_chars] = {}; |
| for (unsigned int i = 0; i < num_chars; ++i) { |
| uppered[i] = lowered[i] = static_cast<char>(i); |
| } |
| AsciiStrCaseFold<false>(&lowered[0], &lowered[num_chars]); |
| AsciiStrCaseFold<true>(&uppered[0], &uppered[num_chars]); |
| for (size_t i = 0; i < num_chars; ++i) { |
| const char ch = static_cast<char>(i), |
| ch_upper = ('a' <= ch && ch <= 'z' ? 'A' + (ch - 'a') : ch), |
| ch_lower = ('A' <= ch && ch <= 'Z' ? 'a' + (ch - 'A') : ch); |
| if (uppered[i] != ch_upper || lowered[i] != ch_lower) { |
| incorrect_index = i > 0 ? i : num_chars; |
| break; |
| } |
| } |
| return incorrect_index; |
| } |
| |
| static_assert(ValidateAsciiCasefold() == 0, "error in case conversion"); |
| |
| } // namespace ascii_internal |
| |
| void AsciiStrToLower(std::string* s) { |
| char* p = &(*s)[0]; // Guaranteed to be valid for empty strings |
| return ascii_internal::AsciiStrCaseFold<false>(p, p + s->size()); |
| } |
| |
| void AsciiStrToUpper(std::string* s) { |
| char* p = &(*s)[0]; // Guaranteed to be valid for empty strings |
| return ascii_internal::AsciiStrCaseFold<true>(p, p + s->size()); |
| } |
| |
| void RemoveExtraAsciiWhitespace(std::string* str) { |
| auto stripped = StripAsciiWhitespace(*str); |
| |
| if (stripped.empty()) { |
| str->clear(); |
| return; |
| } |
| |
| auto input_it = stripped.begin(); |
| auto input_end = stripped.end(); |
| auto output_it = &(*str)[0]; |
| bool is_ws = false; |
| |
| for (; input_it < input_end; ++input_it) { |
| if (is_ws) { |
| // Consecutive whitespace? Keep only the last. |
| is_ws = absl::ascii_isspace(static_cast<unsigned char>(*input_it)); |
| if (is_ws) --output_it; |
| } else { |
| is_ws = absl::ascii_isspace(static_cast<unsigned char>(*input_it)); |
| } |
| |
| *output_it = *input_it; |
| ++output_it; |
| } |
| |
| str->erase(static_cast<size_t>(output_it - &(*str)[0])); |
| } |
| |
| ABSL_NAMESPACE_END |
| } // namespace absl |