| # Copyright 2014 Google Inc. All Rights Reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # This file should be included in all .gyp files used by Cobalt. Normally, |
| # this should be done automatically by gyp_cobalt. |
| { |
| 'variables': { |
| # Cobalt variables. |
| |
| # Whether Cobalt is being built. |
| 'cobalt': 1, |
| |
| # Enabling this variable enables pedantic levels of warnings for the current |
| # toolchain. |
| 'sb_pedantic_warnings%': 0, |
| |
| # Contains the current build configuration. |
| 'cobalt_config%': 'gold', |
| 'cobalt_fastbuild%': 0, |
| |
| # Enable support for the map to mesh filter, which is primarily used to |
| # implement spherical video playback. |
| 'enable_map_to_mesh%': 0, |
| |
| # 'sb_enable_lib' is initially defined inside this inner 'variables' dict so |
| # that it can be accessed by 'cobalt_enable_lib' below here. |
| 'variables': { |
| # Enables embedding Cobalt as a shared library within another app. This |
| # requires a 'lib' starboard implementation for the corresponding platform. |
| 'sb_enable_lib%': 0, |
| }, |
| 'sb_enable_lib%': '<(sb_enable_lib)', |
| 'cobalt_enable_lib': '<(sb_enable_lib)', |
| |
| # Directory path to static contents. |
| 'sb_static_contents_output_base_dir%': '<(PRODUCT_DIR)/content', |
| |
| # Directory path to static contents' data. |
| 'sb_static_contents_output_data_dir%': '<(PRODUCT_DIR)/content/data', |
| |
| # This variable defines what Cobalt's preferred strategy should be for |
| # handling internally triggered application exit requests (e.g. the user |
| # chooses to back out of the application). |
| # 'stop' -- The application should call SbSystemRequestStop() on exit, |
| # resulting in a complete shutdown of the application. |
| # 'suspend' -- The application should call SbSystemRequestSuspend() on |
| # exit, resulting in the application being "minimized". |
| # 'noexit' -- The application should never allow the user to trigger an |
| # exit, this will be managed by the system. |
| 'cobalt_user_on_exit_strategy': 'stop', |
| |
| # Contains the current font package selection. This can be used to trade |
| # font quality, coverage, and latency for different font package sizes. |
| # The font package can be one of the following options: |
| # 'expanded' -- The largest package. It includes everything in the |
| # 'standard' package, along with 'bold' weight CJK. It is |
| # recommended that 'local_font_cache_size_in_bytes' be |
| # increased to 24MB when using this package to account for |
| # the extra memory required by bold CJK. This package is |
| # ~48.7MB. |
| # 'standard' -- The default package. It includes all sans-serif, serif, |
| # and FCC fonts, non-CJK fallback fonts in both 'normal' and |
| # 'bold' weights, and 'normal' weight CJK ('bold' weight CJK |
| # is synthesized from it). This package is ~29.4MB. |
| # 'limited_with_jp' -- A significantly smaller package than 'standard'. |
| # This package removes all but 'normal' and 'bold' weighted |
| # sans-serif and serif, removes the FCC fonts (which must be |
| # provided by the system or downloaded from the web), |
| # removes the 'bold' weighted non-CJK fallback fonts (the |
| # 'normal' weight is still included and is used to |
| # synthesize bold), and replaces standard CJK with low |
| # quality CJK. However, higher quality Japanese is still |
| # included. Because low quality CJK cannot synthesize bold, |
| # bold glyphs are unavailable in Chinese and Korean. This |
| # package is ~10.9MB. |
| # 'limited' -- A smaller package than 'limited_with_jp'. The two packages |
| # are identical with the exception that 'limited' does not |
| # include the higher quality Japanese font; instead it |
| # relies on low quality CJK for all CJK characters. Because |
| # low quality CJK cannot synthesize bold, bold glyphs are |
| # unavailable in Chinese, Japanese, and Korean. This package |
| # is ~7.7MB. |
| # 'minimal' -- The smallest possible font package. It only includes |
| # Roboto's Basic Latin characters. Everything else must be |
| # provided by the system or downloaded from the web. This |
| # package is ~16.4KB. |
| # NOTE: When bold is needed, but unavailable, it is typically synthesized, |
| # resulting in lower quality glyphs than those generated directly from |
| # a bold font. However, this does not occur with low quality CJK, |
| # which is not high enough quality to synthesize. Its glyphs always |
| # have a 'normal' weight. |
| 'cobalt_font_package%': 'standard', |
| |
| # Font package overrides can be used to modify the files included within the |
| # selected package. The following values are available: |
| # -1 -- The package value for the specified category is not overridden. |
| # 0 -- The package value is overridden and no fonts for the specified |
| # category are included. |
| # 1 -- The package value is overridden and fonts from the specified |
| # category with a weight of 'normal' and a style of 'normal' are |
| # included. |
| # 2 -- The package value is overridden and fonts from the specified |
| # category with a weight of either 'normal' or bold' and a style of |
| # 'normal' are included. |
| # 3 -- The package value is overridden and fonts from the specified |
| # category with a weight of either 'normal' or 'bold' and a style of |
| # either 'normal' or 'italic' are included. |
| # 4 -- The package value is overridden and all available fonts from the |
| # specified category are included. This may include additional |
| # weights beyond 'normal' and 'bold'. |
| # See content/fonts/README.md for details on the specific values used by |
| # each of the packages use for the various font categories. |
| 'cobalt_font_package_override_named_sans_serif%': -1, |
| 'cobalt_font_package_override_named_serif%': -1, |
| 'cobalt_font_package_override_named_fcc_fonts%': -1, |
| 'cobalt_font_package_override_fallback_lang_non_cjk%': -1, |
| 'cobalt_font_package_override_fallback_lang_cjk%': -1, |
| 'cobalt_font_package_override_fallback_lang_cjk_low_quality%': -1, |
| 'cobalt_font_package_override_fallback_lang_jp%': -1, |
| 'cobalt_font_package_override_fallback_emoji%': -1, |
| 'cobalt_font_package_override_fallback_symbols%': -1, |
| |
| # Build version number. |
| 'cobalt_version%': 0, |
| # Contains the name of the hosting OS. The value is defined by gyp_cobalt. |
| 'host_os%': 'win', |
| |
| # The target platform id as a string, like 'ps3', 'ps4', etc.. |
| 'sb_target_platform': '', |
| |
| # The operating system of the target, separate from the target_arch. In many |
| # cases, an 'unknown' value is fine, but, if set to 'linux', then we can |
| # assume some things, and it'll save us some configuration time. |
| 'target_os%': 'unknown', |
| |
| # Defines what kind of rasterizer will be used. This can be adjusted to |
| # force a stub graphics implementation or software graphics implementation. |
| # It can be one of the following options: |
| # 'direct-gles' -- Uses a light wrapper over OpenGL ES to handle most |
| # draw elements. This will fall back to the skia hardware |
| # rasterizer for some render tree node types, but is |
| # generally faster on the CPU and GPU. This can handle |
| # 360 rendering. |
| # 'hardware' -- As much hardware acceleration of graphics commands as |
| # possible. This uses skia to wrap OpenGL ES commands. |
| # Required for 360 rendering. |
| # 'software' -- Perform most rasterization using the CPU and only |
| # interact with the GPU to send the final image to the |
| # output window. |
| # 'stub' -- Stub graphics rasterization. A rasterizer object will |
| # still be available and valid, but it will do nothing. |
| 'rasterizer_type%': 'hardware', |
| |
| # If set to 1, will enable support for rendering only the regions of the |
| # display that are modified due to animations, instead of re-rendering the |
| # entire scene each frame. This feature can reduce startup time where |
| # usually there is a small loading spinner animating on the screen. On GLES |
| # renderers, Cobalt will attempt to implement this support by using |
| # eglSurfaceAttrib(..., EGL_SWAP_BEHAVIOR, EGL_BUFFER_PRESERVED), otherwise |
| # the dirty region will be silently disabled. On Blitter API platforms, |
| # if this is enabled, we explicitly create an extra offscreen full-size |
| # intermediate surface to render into. Note that some GLES driver |
| # implementations may internally allocate an extra full screen surface to |
| # support this feature, and many have been noticed to not properly support |
| # this functionality (but they report that they do), and for these reasons |
| # this value is defaulted to 0. |
| 'render_dirty_region_only%': 0, |
| |
| # Modify this value to adjust the default rasterizer setting for your |
| # platform. |
| 'default_renderer_options_dependency%': '<(DEPTH)/cobalt/renderer/default_options_starboard.gyp:default_options', |
| |
| # Allow throttling of the frame rate. This is expressed in terms of |
| # milliseconds and can be a floating point number. Keep in mind that |
| # swapping frames may take some additional processing time, so it may be |
| # better to specify a lower delay. For example, '33' instead of '33.33' |
| # for 30 Hz refresh. |
| 'cobalt_minimum_frame_time_in_milliseconds%': '16.4', |
| |
| # Cobalt will call eglSwapInterval() and specify this value before calling |
| # eglSwapBuffers() each frame. |
| 'cobalt_egl_swap_interval%': 1, |
| |
| # The variables allow changing the target type on platforms where the |
| # native code may require an additional packaging step (ex. Android). |
| 'gtest_target_type%': 'executable', |
| 'final_executable_type%': 'executable', |
| |
| # Set to 1 to build with DIAL support. |
| 'in_app_dial%': 0, |
| |
| # Set to 1 to enable a custom MediaSessionClient. |
| 'custom_media_session_client%': 0, |
| |
| # Set to 1 to enable H5vccAccountManager. |
| 'enable_account_manager%': 0, |
| |
| # Set to 1 to enable H5vccCrashLog. |
| 'enable_crash_log%': 0, |
| |
| # Set to 1 to enable H5vccSSO (Single Sign On). |
| 'enable_sso%': 0, |
| |
| # Set to 1 to compile with SPDY support. |
| 'enable_spdy%': 0, |
| |
| # Set to 1 to enable filtering of HTTP headers before sending. |
| 'enable_xhr_header_filtering%': 0, |
| |
| # Halt execution on failure to allocate memory. |
| 'abort_on_allocation_failure%': 1, |
| |
| # Used by cobalt/media/media.gyp to pick a proper media platform. |
| 'sb_media_platform%': 'starboard', |
| |
| # The relative path from src/ to the directory containing the |
| # starboard_platform.gyp file. It is currently set to |
| # 'starboard/<(target_arch)' to make semi-starboard platforms work. |
| # TODO: Set the default value to '' once all semi-starboard platforms are |
| # moved to starboard. |
| 'starboard_path%': 'starboard/<(target_arch)', |
| |
| # List of platform-specific targets that get compiled into cobalt. |
| 'cobalt_platform_dependencies%': [], |
| |
| # The source of EGL and GLES headers and libraries. |
| # Valid values (case and everything sensitive!): |
| # 'none' - No EGL + GLES implementation is available on this platform. |
| # 'system_gles3' - Use the system implementation of EGL + GLES3. The |
| # headers and libraries must be on the system include and |
| # link paths. |
| # 'system_gles2' - Use the system implementation of EGL + GLES2. The |
| # headers and libraries must be on the system include and |
| # link paths. |
| # 'glimp' - Cobalt's own EGL + GLES2 implementation. This requires a |
| # valid Glimp implementation for the platform. |
| # 'angle' - A DirectX-to-OpenGL adaptation layer. This requires a valid |
| # ANGLE implementation for the platform. |
| # Choosing an unsupported value will result in a GYP error: |
| # "cobalt/renderer/egl_and_gles/egl_and_gles_<gl_type>.gyp not found" |
| 'gl_type%': 'system_gles2', |
| |
| # Temporary indicator for Tizen - should eventually move to feature defines. |
| 'tizen_os%': 0, |
| |
| # The URL of default build time splash screen - see |
| # cobalt/doc/splash_screen.md for information about this. |
| 'fallback_splash_screen_url%': 'h5vcc-embedded://youtube_splash_screen.html', |
| |
| # Cache parameters |
| |
| # The following set of parameters define how much memory is reserved for |
| # different Cobalt caches. These caches affect CPU *and* GPU memory usage. |
| # |
| # The sum of the following caches effectively describes the maximum GPU |
| # texture memory usage (though it doesn't consider video textures and |
| # display color buffers): |
| # - skia_cache_size_in_bytes (GLES2 rasterizer only) |
| # - scratch_surface_cache_size_in_bytes |
| # - surface_cache_size_in_bytes |
| # - image_cache_size_in_bytes |
| # - skia_glyph_atlas_width * skia_glyph_atlas_height |
| # |
| # The other caches affect CPU memory usage. |
| |
| # Determines the capacity of the skia cache. The Skia cache is maintained |
| # within Skia and is used to cache the results of complicated effects such |
| # as shadows, so that Skia draw calls that are used repeatedly across |
| # frames can be cached into surfaces. This setting is only relevant when |
| # using the hardware-accelerated Skia rasterizer (e.g. as opposed to the |
| # Blitter API). |
| 'skia_cache_size_in_bytes%': 4 * 1024 * 1024, |
| |
| # Determines the capacity of the scratch surface cache. The scratch |
| # surface cache facilitates the reuse of temporary offscreen surfaces |
| # within a single frame. This setting is only relevant when using the |
| # hardware-accelerated Skia rasterizer. |
| 'scratch_surface_cache_size_in_bytes%': 0, |
| |
| # Determines the capacity of the surface cache. The surface cache tracks |
| # which render tree nodes are being re-used across frames and stores the |
| # nodes that are most CPU-expensive to render into surfaces. |
| 'surface_cache_size_in_bytes%': 0, |
| |
| # Determines the amount of GPU memory the offscreen target atlases will |
| # use. This is specific to the direct-GLES rasterizer and serves a similar |
| # purpose as the surface_cache_size_in_bytes, but caches any render tree |
| # nodes which require skia for rendering. Two atlases will be allocated |
| # from this memory or multiple atlases of the frame size if the limit |
| # allows. It is recommended that enough memory be reserved for two RGBA |
| # atlases about a quarter of the frame size. |
| 'offscreen_target_cache_size_in_bytes%': -1, |
| |
| # Determines the capacity of the image cache, which manages image surfaces |
| # downloaded from a web page. While it depends on the platform, often (and |
| # ideally) these images are cached within GPU memory. |
| # Set to -1 to automatically calculate the value at runtime, based on |
| # features like windows dimensions and the value of |
| # SbSystemGetTotalGPUMemory(). |
| 'image_cache_size_in_bytes%': -1, |
| |
| # Determines the capacity of the local font cache, which manages all fonts |
| # loaded from local files. Newly encountered sections of font files are |
| # lazily loaded into the cache, enabling subsequent requests to the same |
| # file sections to be handled via direct memory access. Once the limit is |
| # reached, further requests are handled via file stream. |
| # Setting the value to 0 disables memory caching and causes all font file |
| # accesses to be done using file streams. |
| 'local_font_cache_size_in_bytes%': 16 * 1024 * 1024, |
| |
| # Determines the capacity of the remote font cache, which manages all |
| # fonts downloaded from a web page. |
| 'remote_font_cache_size_in_bytes%': 4 * 1024 * 1024, |
| |
| # Determines the capacity of the mesh cache. Each mesh is held compressed |
| # in main memory, to be inflated into a GPU buffer when needed for |
| # projection. When set to 'auto', will be adjusted according to whether |
| # the enable_map_to_mesh is true or not. If enable_map_to_mesh is false, |
| # then the mesh cache size will be set to 0. |
| 'mesh_cache_size_in_bytes%': 'auto', |
| |
| # Only relevant if you are using the Blitter API. |
| # Determines the capacity of the software surface cache, which is used to |
| # cache all surfaces that are rendered via a software rasterizer to avoid |
| # re-rendering them. |
| 'software_surface_cache_size_in_bytes%': 8 * 1024 * 1024, |
| |
| # Modifying this value to be non-1.0f will result in the image cache |
| # capacity being cleared and then temporarily reduced for the duration that |
| # a video is playing. This can be useful for some platforms if they are |
| # particularly constrained for (GPU) memory during video playback. When |
| # playing a video, the image cache is reduced to: |
| # image_cache_size_in_bytes * |
| # image_cache_capacity_multiplier_when_playing_video. |
| 'image_cache_capacity_multiplier_when_playing_video%': '1.0f', |
| |
| # Determines the size in pixels of the glyph atlas where rendered glyphs are |
| # cached. The resulting memory usage is 2 bytes of GPU memory per pixel. |
| # When a value is used that is too small, thrashing may occur that will |
| # result in visible stutter. Such thrashing is more likely to occur when CJK |
| # language glyphs are rendered and when the size of the glyphs in pixels is |
| # larger, such as for higher resolution displays. |
| # The negative default values indicates to the engine that these settings |
| # should be automatically set. |
| 'skia_glyph_atlas_width%': '-1', |
| 'skia_glyph_atlas_height%': '-1', |
| |
| # Determines the size of garbage collection threshold. After this many bytes |
| # have been allocated, the mozjs garbage collector will run. Lowering this |
| # has been found to reduce performance and decrease JavaScript memory usage. |
| # For example, we have measured on at least one platform that performance |
| # becomes 7% worse on average in certain cases when adjusting this number |
| # from 8MB to 1MB. |
| 'mozjs_garbage_collection_threshold_in_bytes%': 8 * 1024 * 1024, |
| |
| # Max Cobalt CPU usage specifies that the cobalt program should |
| # keep it's size below the specified size. A value of -1 causes this |
| # value to be assumed from the starboard API function: |
| # SbSystemGetTotalCPUMemory(). |
| 'max_cobalt_cpu_usage%': -1, |
| |
| # Max Cobalt GPU usage specifies that the cobalt program should |
| # keep it's size below the specified size. A value of -1 causes this |
| # value to be assumed from the starboard API function: |
| # SbSystemGetTotalGPUMemory(). |
| 'max_cobalt_gpu_usage%': -1, |
| |
| # When specified this value will reduce the cpu memory consumption by |
| # the specified amount. -1 disables the value. |
| # When this value is specified then max_cobalt_cpu_usage will not be |
| # used in memory_constrainer, but will still be used for triggering |
| # a warning if the engine consumes more memory than this value specifies. |
| 'reduce_cpu_memory_by%': -1, |
| |
| # When specified this value will reduce the gpu memory consumption by |
| # the specified amount. -1 disables the value. |
| # When this value is specified then max_cobalt_gpu_usage will not be |
| # used in memory_constrainer, but will still be used for triggering |
| # a warning if the engine consumes more memory than this value specifies. |
| 'reduce_gpu_memory_by%': -1, |
| |
| # Compiler configuration. |
| |
| # The following variables are used to specify compiler and linker |
| # flags by build configuration. Platform specific .gypi includes and |
| # .gyp targets can use them to add additional flags. |
| |
| 'compiler_flags%': [], |
| 'linker_flags%': [], |
| |
| 'compiler_flags_debug%': [], |
| 'compiler_flags_c_debug%': [], |
| 'compiler_flags_cc_debug%': [], |
| 'linker_flags_debug%': [], |
| |
| 'compiler_flags_devel%': [], |
| 'compiler_flags_c_devel%': [], |
| 'compiler_flags_cc_devel%': [], |
| 'linker_flags_devel%': [], |
| |
| 'compiler_flags_qa%': [], |
| 'compiler_flags_c_qa%': [], |
| 'compiler_flags_cc_qa%': [], |
| 'linker_flags_qa%': [], |
| |
| 'compiler_flags_gold%': [], |
| 'compiler_flags_c_gold%': [], |
| 'compiler_flags_cc_gold%': [], |
| 'linker_flags_gold%': [], |
| |
| 'compiler_flags_host%': [], |
| 'compiler_flags_c_host%': [], |
| 'compiler_flags_cc_host%': [], |
| 'linker_flags_host%': [], |
| |
| 'platform_libraries%': [], |
| |
| # The only currently-supported Javascript engine is 'mozjs-45'. |
| # TODO: Figure out how to massage gyp the right way to make this work |
| # as expected, rather than requiring it to be set for each platform. |
| #'javascript_engine%': 'mozjs-45', |
| |
| # Disable jit and run in interpreter-only mode by default. It can be set to |
| # 1 to run in jit mode. We have found that disabling jit often results in |
| # faster JavaScript execution and lower memory usage. |
| # Setting this to 1 on a platform or engine for which there is no JIT |
| # implementation is a no-op. |
| 'cobalt_enable_jit%': 0, |
| |
| # The event polling mechanism available on this platform to support libevent. |
| # Platforms may redefine to 'poll' if necessary. |
| # Other mechanisms, e.g. devpoll, kqueue, select, are not yet supported. |
| 'sb_libevent_method%': 'epoll', |
| |
| # Use media source extension implementation that is conformed to the |
| # Candidate Recommandation of July 5th 2016. |
| 'cobalt_media_source_2016%': 1, |
| |
| # Note that the following media buffer related variables are only used when |
| # |cobalt_media_source_2016| is set to 1. |
| |
| # This can be set to "memory" or "file". When it is set to "memory", the |
| # media buffers will be stored in main memory allocated by SbMemory |
| # functions. When it is set to "file", the media buffers will be stored in |
| # a temporary file in the system cache folder acquired by calling |
| # SbSystemGetPath() with "kSbSystemPathCacheDirectory". Note that when its |
| # value is "file" the media stack will still allocate memory to cache the |
| # the buffers in use. |
| 'cobalt_media_buffer_storage_type%': 'memory', |
| # When either |cobalt_media_buffer_initial_capacity| or |
| # |cobalt_media_buffer_allocation_unit| isn't zero, media buffers will be |
| # allocated using a memory pool. Set the following variable to 1 to |
| # allocate the media buffer pool memory on demand and return all memory to |
| # the system when there is no media buffer allocated. Setting the following |
| # value to 0 results in that Cobalt will allocate |
| # |cobalt_media_buffer_initial_capacity| bytes for media buffer on startup |
| # and will not release any media buffer memory back to the system even if |
| # there is no media buffers allocated. |
| 'cobalt_media_buffer_pool_allocate_on_demand%': 1, |
| # The amount of memory that will be used to store media buffers allocated |
| # during system startup. To allocate a large chunk at startup helps with |
| # reducing fragmentation and can avoid failures to allocate incrementally. |
| # This can be set to 0. |
| 'cobalt_media_buffer_initial_capacity%': 21 * 1024 * 1024, |
| # When the media stack needs more memory to store media buffers, it will |
| # allocate extra memory in units of |cobalt_media_buffer_allocation_unit|. |
| # This can be set to 0, in which case the media stack will allocate extra |
| # memory on demand. When |cobalt_media_buffer_initial_capacity| and this |
| # value are both set to 0, the media stack will allocate individual buffers |
| # directly using SbMemory functions. |
| 'cobalt_media_buffer_allocation_unit%': 1 * 1024 * 1024, |
| |
| # The media buffer will be allocated using the following alignment. Set |
| # this to a larger value may increase the memory consumption of media |
| # buffers. |
| 'cobalt_media_buffer_alignment%': 0, |
| # Extra bytes allocated at the end of a media buffer to ensure that the |
| # buffer can be use optimally by specific instructions like SIMD. Set to 0 |
| # to remove any padding. |
| 'cobalt_media_buffer_padding%': 0, |
| |
| # The memory used when playing mp4 videos that is not in DASH format. The |
| # resolution of such videos shouldn't go beyond 1080p. Its value should be |
| # less than the sum of 'cobalt_media_buffer_non_video_budget' and |
| # 'cobalt_media_buffer_video_budget_1080p' but not less than 8 MB. |
| 'cobalt_media_buffer_progressive_budget%': 12 * 1024 * 1024, |
| |
| # Specifies the maximum amount of memory used by audio or text buffers of |
| # media source before triggering a garbage collection. A large value will |
| # cause more memory being used by audio buffers but will also make |
| # JavaScript app less likely to re-download audio data. Note that the |
| # JavaScript app may experience significant difficulty if this value is too |
| # low. |
| 'cobalt_media_buffer_non_video_budget%': 5 * 1024 * 1024, |
| |
| # Specifies the maximum amount of memory used by video buffers of media |
| # source before triggering a garbage collection when the video resolution is |
| # lower than 1080p (1920x1080). A large value will cause more memory being |
| # used by video buffers but will also make JavaScript app less likely to |
| # re-download video data. Note that the JavaScript app may experience |
| # significant difficulty if this value is too low. |
| 'cobalt_media_buffer_video_budget_1080p%': 16 * 1024 * 1024, |
| # Specifies the maximum amount of memory used by video buffers of media |
| # source before triggering a garbage collection when the video resolution is |
| # lower than 4k (3840x2160). A large value will cause more memory being |
| # used by video buffers but will also make JavaScript app less likely to |
| # re-download video data. Note that the JavaScript app may experience |
| # significant difficulty if this value is too low. |
| 'cobalt_media_buffer_video_budget_4k%': 60 * 1024 * 1024, |
| }, |
| |
| 'target_defaults': { |
| 'variables': { |
| # The condition that operates on sb_pedantic_warnings is in a |
| # target_conditions section, and will not have access to the default |
| # fallback value of sb_pedantic_warnings at the top of this file, |
| # or to the sb_pedantic_warnings variable placed at the root |
| # variables scope of .gyp files, because those variables are not set at |
| # target scope. As a workaround, if sb_pedantic_warnings is not |
| # set at target scope, define it in target scope to contain whatever |
| # value it has during early variable expansion. That's enough to make |
| # it available during target conditional processing. |
| 'sb_pedantic_warnings%': '<(sb_pedantic_warnings)', |
| }, |
| 'defines': [ |
| 'COBALT', |
| 'COBALT_MEDIA_BUFFER_POOL_ALLOCATE_ON_DEMAND=<(cobalt_media_buffer_pool_allocate_on_demand)', |
| 'COBALT_MEDIA_BUFFER_INITIAL_CAPACITY=<(cobalt_media_buffer_initial_capacity)', |
| 'COBALT_MEDIA_BUFFER_ALLOCATION_UNIT=<(cobalt_media_buffer_allocation_unit)', |
| 'COBALT_MEDIA_BUFFER_ALIGNMENT=<(cobalt_media_buffer_alignment)', |
| 'COBALT_MEDIA_BUFFER_PADDING=<(cobalt_media_buffer_padding)', |
| 'COBALT_MEDIA_BUFFER_PROGRESSIVE_BUDGET=<(cobalt_media_buffer_progressive_budget)', |
| 'COBALT_MEDIA_BUFFER_NON_VIDEO_BUDGET=<(cobalt_media_buffer_non_video_budget)', |
| 'COBALT_MEDIA_BUFFER_VIDEO_BUDGET_1080P=<(cobalt_media_buffer_video_budget_1080p)', |
| 'COBALT_MEDIA_BUFFER_VIDEO_BUDGET_4K=<(cobalt_media_buffer_video_budget_4k)', |
| ], |
| 'cflags': [ '<@(compiler_flags)' ], |
| 'ldflags': [ '<@(linker_flags)' ], |
| 'cflags_host': [ |
| '<@(compiler_flags_host)', |
| '-D__LB_HOST__' |
| ], |
| 'cflags_c_host': [ |
| '<@(compiler_flags_c_host)', |
| ], |
| 'cflags_cc_host': [ |
| '<@(compiler_flags_cc_host)', |
| ], |
| 'ldflags_host': [ '<@(linker_flags_host)' ], |
| |
| # Location of Cygwin which is used by the build system when running on a |
| # Windows platform. |
| 'msvs_cygwin_dirs': ['<(DEPTH)/third_party/cygwin'], |
| |
| # Allows any source file to include files relative to the source tree. |
| 'include_dirs': [ '<(DEPTH)' ], |
| 'libraries': [ '<@(platform_libraries)' ], |
| |
| 'conditions': [ |
| ['cobalt_media_source_2016 == 1', { |
| 'defines': [ |
| 'COBALT_MEDIA_SOURCE_2016=1', |
| ], |
| }, { |
| 'defines': [ |
| 'COBALT_MEDIA_SOURCE_2012=1', |
| ], |
| }], |
| ['cobalt_media_buffer_storage_type == "memory"', { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_STORAGE_TYPE_MEMORY=1', |
| ], |
| }, { |
| 'defines': [ |
| 'COBALT_MEDIA_BUFFER_STORAGE_TYPE_FILE=1', |
| ], |
| }], |
| ['final_executable_type=="shared_library"', { |
| 'target_conditions': [ |
| ['_toolset=="target"', { |
| 'defines': [ |
| # Rewrite main() functions into StarboardMain. TODO: This is a |
| # hack, it would be better to be more surgical, here. |
| 'main=StarboardMain', |
| ], |
| 'cflags': [ |
| # To link into a shared library on Linux and similar platforms, |
| # the compiler must be told to generate Position Independent Code. |
| # This appears to cause errors when linking the code statically, |
| # however. |
| '-fPIC', |
| ], |
| }], |
| ], |
| }], |
| ['OS == "lb_shell"', { |
| 'defines': [ |
| '__LB_SHELL__', |
| ], |
| 'include_dirs_target': [ |
| '<(DEPTH)/lbshell/src/platform/<(target_arch)', |
| '<(DEPTH)/lbshell/src/platform/<(target_arch)/posix_emulation/lb_shell', |
| # headers that we don't need, but should exist somewhere in the path: |
| '<(DEPTH)/lbshell/src/platform/<(target_arch)/posix_emulation/place_holders', |
| # TODO: This is needed to support the option to include |
| # posix_emulation.h to all compiled source files. This dependency |
| # should be refactored and removed. |
| '<(DEPTH)/lbshell/src', |
| ], |
| }], # OS == "lb_shell" |
| ['OS == "starboard"', { |
| 'target_conditions': [ |
| ['_toolset=="target"', { |
| # Keeps common Starboard target changes in the starboard project. |
| 'includes': [ |
| '../../../starboard/starboard_base_target.gypi', |
| ], |
| }], |
| ], |
| }], # OS == "starboard" |
| ['in_app_dial == 1', { |
| 'defines': [ |
| 'DIAL_SERVER', |
| ], |
| }], |
| ['enable_file_scheme == 1', { |
| 'defines': [ |
| 'COBALT_ENABLE_FILE_SCHEME', |
| ], |
| }], |
| ['enable_spdy == 0', { |
| 'defines': [ |
| 'COBALT_DISABLE_SPDY', |
| ], |
| }], |
| ], |
| |
| # TODO: Revisit and remove unused configurations. |
| 'configurations': { |
| 'debug_base': { |
| 'abstract': 1, |
| # no optimization, include symbols: |
| 'cflags': [ '<@(compiler_flags_debug)' ], |
| 'cflags_c': [ '<@(compiler_flags_c_debug)' ], |
| 'cflags_cc': [ '<@(compiler_flags_cc_debug)' ], |
| 'ldflags': [ '<@(linker_flags_debug)' ], |
| 'defines': [ |
| 'ALLOCATOR_STATS_TRACKING', |
| 'COBALT_BOX_DUMP_ENABLED', |
| 'COBALT_BUILD_TYPE_DEBUG', |
| 'COBALT_ENABLE_JAVASCRIPT_ERROR_LOGGING', |
| 'COBALT_SECURITY_SCREEN_CLEAR_TO_UGLY_COLOR', |
| '_DEBUG', |
| 'ENABLE_DEBUG_COMMAND_LINE_SWITCHES', |
| 'ENABLE_DEBUG_C_VAL', |
| 'ENABLE_DEBUG_CONSOLE', |
| 'ENABLE_DIR_SOURCE_ROOT_ACCESS', |
| 'ENABLE_IGNORE_CERTIFICATE_ERRORS', |
| 'ENABLE_PARTIAL_LAYOUT_CONTROL', |
| 'ENABLE_TEST_RUNNER', |
| '__LB_SHELL__ENABLE_SCREENSHOT__', |
| '__LB_SHELL__FORCE_LOGGING__', # TODO: Rename to COBALT_LOGGING_ENABLED. |
| 'SK_DEVELOPER', |
| ], |
| }, # end of debug_base |
| 'devel_base': { |
| 'abstract': 1, |
| # optimize, include symbols: |
| 'cflags': [ '<@(compiler_flags_devel)' ], |
| 'cflags_c': [ '<@(compiler_flags_c_devel)' ], |
| 'cflags_cc': [ '<@(compiler_flags_cc_devel)' ], |
| 'ldflags': [ '<@(linker_flags_devel)' ], |
| 'defines': [ |
| '_DEBUG', |
| 'ALLOCATOR_STATS_TRACKING', |
| 'COBALT_BUILD_TYPE_DEVEL', |
| 'COBALT_ENABLE_JAVASCRIPT_ERROR_LOGGING', |
| 'COBALT_SECURITY_SCREEN_CLEAR_TO_UGLY_COLOR', |
| 'ENABLE_DEBUG_COMMAND_LINE_SWITCHES', |
| 'ENABLE_DEBUG_C_VAL', |
| 'ENABLE_DEBUG_CONSOLE', |
| 'ENABLE_DIR_SOURCE_ROOT_ACCESS', |
| 'ENABLE_IGNORE_CERTIFICATE_ERRORS', |
| 'ENABLE_PARTIAL_LAYOUT_CONTROL', |
| 'ENABLE_TEST_RUNNER', |
| '__LB_SHELL__ENABLE_SCREENSHOT__', |
| '__LB_SHELL__FORCE_LOGGING__', |
| 'SK_DEVELOPER', |
| ], |
| }, # end of devel_base |
| 'qa_base': { |
| 'abstract': 1, |
| # optimize: |
| 'cflags': [ '<@(compiler_flags_qa)' ], |
| 'cflags_c': [ '<@(compiler_flags_c_qa)' ], |
| 'cflags_cc': [ '<@(compiler_flags_cc_qa)' ], |
| 'ldflags': [ '<@(linker_flags_qa)' ], |
| 'defines': [ |
| 'ALLOCATOR_STATS_TRACKING', |
| 'COBALT_BUILD_TYPE_QA', |
| 'COBALT_ENABLE_JAVASCRIPT_ERROR_LOGGING', |
| 'COBALT_SECURITY_SCREEN_CLEAR_TO_UGLY_COLOR', |
| 'ENABLE_DEBUG_COMMAND_LINE_SWITCHES', |
| 'ENABLE_DEBUG_C_VAL', |
| 'ENABLE_DEBUG_CONSOLE', |
| 'ENABLE_DIR_SOURCE_ROOT_ACCESS', |
| 'ENABLE_IGNORE_CERTIFICATE_ERRORS', |
| 'ENABLE_PARTIAL_LAYOUT_CONTROL', |
| 'ENABLE_TEST_RUNNER', |
| '__LB_SHELL__ENABLE_SCREENSHOT__', |
| '__LB_SHELL__FOR_QA__', |
| 'NDEBUG', |
| ], |
| }, # end of devel_base |
| 'gold_base': { |
| 'abstract': 1, |
| # optimize: |
| 'cflags': [ '<@(compiler_flags_gold)' ], |
| 'cflags_c': [ '<@(compiler_flags_c_gold)' ], |
| 'cflags_cc': [ '<@(compiler_flags_cc_gold)' ], |
| 'ldflags': [ '<@(linker_flags_gold)' ], |
| 'defines': [ |
| 'ALLOCATOR_STATS_TRACKING', |
| 'COBALT_BUILD_TYPE_GOLD', |
| 'COBALT_FORCE_CSP', |
| 'COBALT_FORCE_HTTPS', |
| '__LB_SHELL__FOR_RELEASE__', |
| 'NDEBUG', |
| 'TRACING_DISABLED', |
| ], |
| }, # end of gold_base |
| }, # end of configurations |
| }, # end of target_defaults |
| |
| # For configurations other than Gold, set the flag that lets test data files |
| # be copied and carried along with the build. |
| # Clients must copy over all content; to avoid having to copy over extra data, we |
| # omit the test data |
| 'conditions': [ |
| ['cobalt_config != "gold" and cobalt_enable_lib == 0', { |
| 'variables' : { |
| 'cobalt_copy_debug_console': 1, |
| 'cobalt_copy_test_data': 1, |
| 'enable_about_scheme': 1, |
| 'enable_fake_microphone': 1, |
| 'enable_file_scheme': 1, |
| 'enable_network_logging': 1, |
| 'enable_remote_debugging%': 1, |
| 'enable_screenshot': 1, |
| 'enable_webdriver%': 1, |
| 'sb_allows_memory_tracking': 1, |
| }, |
| }, |
| { |
| 'variables' : { |
| 'cobalt_copy_debug_console': 0, |
| 'cobalt_copy_test_data': 0, |
| 'enable_about_scheme': 0, |
| 'enable_fake_microphone': 0, |
| 'enable_file_scheme': 0, |
| 'enable_network_logging': 0, |
| 'enable_remote_debugging%': 0, |
| 'enable_screenshot': 0, |
| 'enable_webdriver': 0, |
| 'sb_allows_memory_tracking': 0, |
| }, |
| }], |
| ], |
| } |