blob: 8506701e14712474713fd8a08dab6b8a0f6f1615 [file] [log] [blame]
// Copyright (c) 2012 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
// Histogram is an object that aggregates statistics, and can summarize them in
// various forms, including ASCII graphical, HTML, and numerically (as a
// vector of numbers corresponding to each of the aggregating buckets).
// It supports calls to accumulate either time intervals (which are processed
// as integral number of milliseconds), or arbitrary integral units.
// For Histogram(exponential histogram), LinearHistogram and CustomHistogram,
// the minimum for a declared range is 1 (instead of 0), while the maximum is
// (HistogramBase::kSampleType_MAX - 1). Currently you can declare histograms
// with ranges exceeding those limits (e.g. 0 as minimal or
// HistogramBase::kSampleType_MAX as maximal), but those excesses will be
// silently clamped to those limits (for backwards compatibility with existing
// code). Best practice is to not exceed the limits.
// Each use of a histogram with the same name will reference the same underlying
// data, so it is safe to record to the same histogram from multiple locations
// in the code. It is a runtime error if all uses of the same histogram do not
// agree exactly in type, bucket size and range.
// For Histogram and LinearHistogram, the maximum for a declared range should
// always be larger (not equal) than minmal range. Zero and
// HistogramBase::kSampleType_MAX are implicitly added as first and last ranges,
// so the smallest legal bucket_count is 3. However CustomHistogram can have
// bucket count as 2 (when you give a custom ranges vector containing only 1
// range).
// For these 3 kinds of histograms, the max bucket count is always
// (Histogram::kBucketCount_MAX - 1).
// The buckets layout of class Histogram is exponential. For example, buckets
// might contain (sequentially) the count of values in the following intervals:
// [0,1), [1,2), [2,4), [4,8), [8,16), [16,32), [32,64), [64,infinity)
// That bucket allocation would actually result from construction of a histogram
// for values between 1 and 64, with 8 buckets, such as:
// Histogram count("some name", 1, 64, 8);
// Note that the underflow bucket [0,1) and the overflow bucket [64,infinity)
// are also counted by the constructor in the user supplied "bucket_count"
// argument.
// The above example has an exponential ratio of 2 (doubling the bucket width
// in each consecutive bucket. The Histogram class automatically calculates
// the smallest ratio that it can use to construct the number of buckets
// selected in the constructor. An another example, if you had 50 buckets,
// and millisecond time values from 1 to 10000, then the ratio between
// consecutive bucket widths will be approximately somewhere around the 50th
// root of 10000. This approach provides very fine grain (narrow) buckets
// at the low end of the histogram scale, but allows the histogram to cover a
// gigantic range with the addition of very few buckets.
// Usually we use macros to define and use a histogram. These macros use a
// pattern involving a function static variable, that is a pointer to a
// histogram. This static is explicitly initialized on any thread
// that detects a uninitialized (NULL) pointer. The potentially racy
// initialization is not a problem as it is always set to point to the same
// value (i.e., the FactoryGet always returns the same value). FactoryGet
// is also completely thread safe, which results in a completely thread safe,
// and relatively fast, set of counters. To avoid races at shutdown, the static
// pointer is NOT deleted, and we leak the histograms at process termination.
#ifndef BASE_METRICS_HISTOGRAM_H_
#define BASE_METRICS_HISTOGRAM_H_
#include <map>
#include <string>
#include <vector>
#include "base/atomicops.h"
#include "base/base_export.h"
#include "base/basictypes.h"
#include "base/compiler_specific.h"
#include "base/gtest_prod_util.h"
#include "base/logging.h"
#include "base/memory/scoped_ptr.h"
#include "base/metrics/bucket_ranges.h"
#include "base/metrics/histogram_base.h"
#include "base/metrics/histogram_samples.h"
#include "base/time.h"
class Pickle;
class PickleIterator;
namespace base {
class Lock;
//------------------------------------------------------------------------------
// Histograms are often put in areas where they are called many many times, and
// performance is critical. As a result, they are designed to have a very low
// recurring cost of executing (adding additional samples). Toward that end,
// the macros declare a static pointer to the histogram in question, and only
// take a "slow path" to construct (or find) the histogram on the first run
// through the macro. We leak the histograms at shutdown time so that we don't
// have to validate using the pointers at any time during the running of the
// process.
// The following code is generally what a thread-safe static pointer
// initializaion looks like for a histogram (after a macro is expanded). This
// sample is an expansion (with comments) of the code for
// HISTOGRAM_CUSTOM_COUNTS().
/*
do {
// The pointer's presence indicates the initialization is complete.
// Initialization is idempotent, so it can safely be atomically repeated.
static base::subtle::AtomicWord atomic_histogram_pointer = 0;
// Acquire_Load() ensures that we acquire visibility to the pointed-to data
// in the histogrom.
base::Histogram* histogram_pointer(reinterpret_cast<base::Histogram*>(
base::subtle::Acquire_Load(&atomic_histogram_pointer)));
if (!histogram_pointer) {
// This is the slow path, which will construct OR find the matching
// histogram. FactoryGet includes locks on a global histogram name map
// and is completely thread safe.
histogram_pointer = base::Histogram::FactoryGet(
name, min, max, bucket_count, base::HistogramBase::kNoFlags);
// Use Release_Store to ensure that the histogram data is made available
// globally before we make the pointer visible.
// Several threads may perform this store, but the same value will be
// stored in all cases (for a given named/spec'ed histogram).
// We could do this without any barrier, since FactoryGet entered and
// exited a lock after construction, but this barrier makes things clear.
base::subtle::Release_Store(&atomic_histogram_pointer,
reinterpret_cast<base::subtle::AtomicWord>(histogram_pointer));
}
// Ensure calling contract is upheld, and the name does NOT vary.
DCHECK(histogram_pointer->histogram_name() == constant_histogram_name);
histogram_pointer->Add(sample);
} while (0);
*/
// The above pattern is repeated in several macros. The only elements that
// vary are the invocation of the Add(sample) vs AddTime(sample), and the choice
// of which FactoryGet method to use. The different FactoryGet methods have
// various argument lists, so the function with its argument list is provided as
// a macro argument here. The name is only used in a DCHECK, to assure that
// callers don't try to vary the name of the histogram (which would tend to be
// ignored by the one-time initialization of the histogtram_pointer).
#define STATIC_HISTOGRAM_POINTER_BLOCK(constant_histogram_name, \
histogram_add_method_invocation, \
histogram_factory_get_invocation) \
do { \
static base::subtle::AtomicWord atomic_histogram_pointer = 0; \
base::Histogram* histogram_pointer(reinterpret_cast<base::Histogram*>( \
base::subtle::Acquire_Load(&atomic_histogram_pointer))); \
if (!histogram_pointer) { \
histogram_pointer = histogram_factory_get_invocation; \
base::subtle::Release_Store(&atomic_histogram_pointer, \
reinterpret_cast<base::subtle::AtomicWord>(histogram_pointer)); \
} \
DCHECK_EQ(histogram_pointer->histogram_name(), \
std::string(constant_histogram_name)); \
histogram_pointer->histogram_add_method_invocation; \
} while (0)
//------------------------------------------------------------------------------
// Provide easy general purpose histogram in a macro, just like stats counters.
// The first four macros use 50 buckets.
#define HISTOGRAM_TIMES(name, sample) HISTOGRAM_CUSTOM_TIMES( \
name, sample, base::TimeDelta::FromMilliseconds(1), \
base::TimeDelta::FromSeconds(10), 50)
#define HISTOGRAM_COUNTS(name, sample) HISTOGRAM_CUSTOM_COUNTS( \
name, sample, 1, 1000000, 50)
#define HISTOGRAM_COUNTS_100(name, sample) HISTOGRAM_CUSTOM_COUNTS( \
name, sample, 1, 100, 50)
#define HISTOGRAM_COUNTS_10000(name, sample) HISTOGRAM_CUSTOM_COUNTS( \
name, sample, 1, 10000, 50)
#define HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \
base::Histogram::FactoryGet(name, min, max, bucket_count, \
base::HistogramBase::kNoFlags))
#define HISTOGRAM_PERCENTAGE(name, under_one_hundred) \
HISTOGRAM_ENUMERATION(name, under_one_hundred, 101)
// For folks that need real specific times, use this to select a precise range
// of times you want plotted, and the number of buckets you want used.
#define HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, AddTime(sample), \
base::Histogram::FactoryTimeGet(name, min, max, bucket_count, \
base::HistogramBase::kNoFlags))
// Support histograming of an enumerated value. The samples should always be
// strictly less than |boundary_value| -- this prevents you from running into
// problems down the line if you add additional buckets to the histogram. Note
// also that, despite explicitly setting the minimum bucket value to |1| below,
// it is fine for enumerated histograms to be 0-indexed -- this is because
// enumerated histograms should never have underflow.
#define HISTOGRAM_ENUMERATION(name, sample, boundary_value) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \
base::LinearHistogram::FactoryGet(name, 1, boundary_value, \
boundary_value + 1, base::HistogramBase::kNoFlags))
// Support histograming of an enumerated value. Samples should be one of the
// std::vector<int> list provided via |custom_ranges|. See comments above
// CustomRanges::FactoryGet about the requirement of |custom_ranges|.
// You can use the helper function CustomHistogram::ArrayToCustomRanges to
// transform a C-style array of valid sample values to a std::vector<int>.
#define HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \
base::CustomHistogram::FactoryGet(name, custom_ranges, \
base::HistogramBase::kNoFlags))
//------------------------------------------------------------------------------
// Define Debug vs non-debug flavors of macros.
#ifndef NDEBUG
#define DHISTOGRAM_TIMES(name, sample) HISTOGRAM_TIMES(name, sample)
#define DHISTOGRAM_COUNTS(name, sample) HISTOGRAM_COUNTS(name, sample)
#define DHISTOGRAM_PERCENTAGE(name, under_one_hundred) HISTOGRAM_PERCENTAGE(\
name, under_one_hundred)
#define DHISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \
HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count)
#define DHISTOGRAM_CLIPPED_TIMES(name, sample, min, max, bucket_count) \
HISTOGRAM_CLIPPED_TIMES(name, sample, min, max, bucket_count)
#define DHISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \
HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count)
#define DHISTOGRAM_ENUMERATION(name, sample, boundary_value) \
HISTOGRAM_ENUMERATION(name, sample, boundary_value)
#define DHISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \
HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges)
#else // NDEBUG
// Keep a mention of passed variables to avoid unused variable warnings in
// release build if these variables are only used in macros.
#define DISCARD_2_ARGUMENTS(a, b) \
do { \
static_cast<void>(a); \
static_cast<void>(b); \
} while(false)
#define DISCARD_3_ARGUMENTS(a, b, c) \
do { \
static_cast<void>(a); \
static_cast<void>(b); \
static_cast<void>(c); \
} while(false)
#define DISCARD_5_ARGUMENTS(a, b, c, d, e) \
do { \
static_cast<void>(a); \
static_cast<void>(b); \
static_cast<void>(c); \
static_cast<void>(d); \
static_cast<void>(e); \
} while(false)
#define DHISTOGRAM_TIMES(name, sample) \
DISCARD_2_ARGUMENTS(name, sample)
#define DHISTOGRAM_COUNTS(name, sample) \
DISCARD_2_ARGUMENTS(name, sample)
#define DHISTOGRAM_PERCENTAGE(name, under_one_hundred) \
DISCARD_2_ARGUMENTS(name, under_one_hundred)
#define DHISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \
DISCARD_5_ARGUMENTS(name, sample, min, max, bucket_count)
#define DHISTOGRAM_CLIPPED_TIMES(name, sample, min, max, bucket_count) \
DISCARD_5_ARGUMENTS(name, sample, min, max, bucket_count)
#define DHISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \
DISCARD_5_ARGUMENTS(name, sample, min, max, bucket_count)
#define DHISTOGRAM_ENUMERATION(name, sample, boundary_value) \
DISCARD_3_ARGUMENTS(name, sample, boundary_value)
#define DHISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \
DISCARD_3_ARGUMENTS(name, sample, custom_ranges)
#endif // NDEBUG
//------------------------------------------------------------------------------
// The following macros provide typical usage scenarios for callers that wish
// to record histogram data, and have the data submitted/uploaded via UMA.
// Not all systems support such UMA, but if they do, the following macros
// should work with the service.
#if defined(COBALT_BUILD_TYPE_GOLD)
#define UMA_HISTOGRAM_TIMES(name, sample) DISCARD_2_ARGUMENTS(name, sample)
#define UMA_HISTOGRAM_MEDIUM_TIMES(name, sample) \
DISCARD_2_ARGUMENTS(name, sample)
// Use this macro when times can routinely be much longer than 10 seconds.
#define UMA_HISTOGRAM_LONG_TIMES(name, sample) \
DISCARD_2_ARGUMENTS(name, sample)
#define UMA_HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \
DISCARD_5_ARGUMENTS(name, sample, min, max, bucket_count)
#define UMA_HISTOGRAM_COUNTS(name, sample) DISCARD_2_ARGUMENTS(name, sample)
#define UMA_HISTOGRAM_COUNTS_100(name, sample) \
DISCARD_2_ARGUMENTS(name, sample)
#define UMA_HISTOGRAM_COUNTS_10000(name, sample) \
DISCARD_2_ARGUMENTS(name, sample)
#define UMA_HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \
DISCARD_5_ARGUMENTS(name, sample, min, max, bucket_count)
#define UMA_HISTOGRAM_MEMORY_KB(name, sample) DISCARD_2_ARGUMENTS(name, sample)
#define UMA_HISTOGRAM_MEMORY_MB(name, sample) DISCARD_2_ARGUMENTS(name, sample)
#define UMA_HISTOGRAM_PERCENTAGE(name, under_one_hundred) \
DISCARD_2_ARGUMENTS(name, under_one_hundred)
#define UMA_HISTOGRAM_BOOLEAN(name, sample) DISCARD_2_ARGUMENTS(name, sample)
#define UMA_HISTOGRAM_ENUMERATION(name, sample, boundary_value) \
DISCARD_3_ARGUMENTS(name, sample, boundary_value)
#define UMA_HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \
DISCARD_3_ARGUMENTS(name, sample, custom_ranges)
#else
#define UMA_HISTOGRAM_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \
name, sample, base::TimeDelta::FromMilliseconds(1), \
base::TimeDelta::FromSeconds(10), 50)
#define UMA_HISTOGRAM_MEDIUM_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \
name, sample, base::TimeDelta::FromMilliseconds(10), \
base::TimeDelta::FromMinutes(3), 50)
// Use this macro when times can routinely be much longer than 10 seconds.
#define UMA_HISTOGRAM_LONG_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \
name, sample, base::TimeDelta::FromMilliseconds(1), \
base::TimeDelta::FromHours(1), 50)
#define UMA_HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, AddTime(sample), \
base::Histogram::FactoryTimeGet(name, min, max, bucket_count, \
base::Histogram::kUmaTargetedHistogramFlag))
#define UMA_HISTOGRAM_COUNTS(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \
name, sample, 1, 1000000, 50)
#define UMA_HISTOGRAM_COUNTS_100(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \
name, sample, 1, 100, 50)
#define UMA_HISTOGRAM_COUNTS_10000(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \
name, sample, 1, 10000, 50)
#define UMA_HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \
base::Histogram::FactoryGet(name, min, max, bucket_count, \
base::Histogram::kUmaTargetedHistogramFlag))
#define UMA_HISTOGRAM_MEMORY_KB(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \
name, sample, 1000, 500000, 50)
#define UMA_HISTOGRAM_MEMORY_MB(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \
name, sample, 1, 1000, 50)
#define UMA_HISTOGRAM_PERCENTAGE(name, under_one_hundred) \
UMA_HISTOGRAM_ENUMERATION(name, under_one_hundred, 101)
#define UMA_HISTOGRAM_BOOLEAN(name, sample) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, AddBoolean(sample), \
base::BooleanHistogram::FactoryGet(name, \
base::Histogram::kUmaTargetedHistogramFlag))
// The samples should always be strictly less than |boundary_value|. For more
// details, see the comment for the |HISTOGRAM_ENUMERATION| macro, above.
#define UMA_HISTOGRAM_ENUMERATION(name, sample, boundary_value) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \
base::LinearHistogram::FactoryGet(name, 1, boundary_value, \
boundary_value + 1, base::Histogram::kUmaTargetedHistogramFlag))
#define UMA_HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \
STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \
base::CustomHistogram::FactoryGet(name, custom_ranges, \
base::Histogram::kUmaTargetedHistogramFlag))
#endif // defined(COBALT_BUILD_TYPE_GOLD)
//------------------------------------------------------------------------------
class BucketRanges;
class SampleVector;
class BooleanHistogram;
class CustomHistogram;
class Histogram;
class LinearHistogram;
class BASE_EXPORT Histogram : public HistogramBase {
public:
// Initialize maximum number of buckets in histograms as 16,384.
static const size_t kBucketCount_MAX;
typedef std::vector<Count> Counts;
enum Inconsistencies {
NO_INCONSISTENCIES = 0x0,
RANGE_CHECKSUM_ERROR = 0x1,
BUCKET_ORDER_ERROR = 0x2,
COUNT_HIGH_ERROR = 0x4,
COUNT_LOW_ERROR = 0x8,
NEVER_EXCEEDED_VALUE = 0x10
};
struct DescriptionPair {
Sample sample;
const char* description; // Null means end of a list of pairs.
};
//----------------------------------------------------------------------------
// For a valid histogram, input should follow these restrictions:
// minimum > 0 (if a minimum below 1 is specified, it will implicitly be
// normalized up to 1)
// maximum > minimum
// buckets > 2 [minimum buckets needed: underflow, overflow and the range]
// Additionally,
// buckets <= (maximum - minimum + 2) - this is to ensure that we don't have
// more buckets than the range of numbers; having more buckets than 1 per
// value in the range would be nonsensical.
static Histogram* FactoryGet(const std::string& name,
Sample minimum,
Sample maximum,
size_t bucket_count,
int32 flags);
static Histogram* FactoryTimeGet(const std::string& name,
base::TimeDelta minimum,
base::TimeDelta maximum,
size_t bucket_count,
int32 flags);
// Time call for use with DHISTOGRAM*.
// Returns TimeTicks::Now() in debug and TimeTicks() in release build.
static TimeTicks DebugNow();
static void InitializeBucketRanges(Sample minimum,
Sample maximum,
size_t bucket_count,
BucketRanges* ranges);
// This method is an interface, used only by BooleanHistogram.
virtual void AddBoolean(bool value);
// Accept a TimeDelta to increment.
void AddTime(TimeDelta time) {
Add(static_cast<int>(time.InMilliseconds()));
}
void AddSamples(const HistogramSamples& samples);
bool AddSamplesFromPickle(PickleIterator* iter);
// Convenience methods for serializing/deserializing the histograms.
// Histograms from Renderer process are serialized and sent to the browser.
// Browser process reconstructs the histogram from the pickled version
// accumulates the browser-side shadow copy of histograms (that mirror
// histograms created in the renderer).
// Serialize the given snapshot of a Histogram into a String. Uses
// Pickle class to flatten the object.
static std::string SerializeHistogramInfo(const Histogram& histogram,
const HistogramSamples& snapshot);
// The following method accepts a list of pickled histograms and
// builds a histogram and updates shadow copy of histogram data in the
// browser process.
static bool DeserializeHistogramInfo(const std::string& histogram_info);
// This constant if for FindCorruption. Since snapshots of histograms are
// taken asynchronously relative to sampling, and our counting code currently
// does not prevent race conditions, it is pretty likely that we'll catch a
// redundant count that doesn't match the sample count. We allow for a
// certain amount of slop before flagging this as an inconsistency. Even with
// an inconsistency, we'll snapshot it again (for UMA in about a half hour),
// so we'll eventually get the data, if it was not the result of a corruption.
static const int kCommonRaceBasedCountMismatch;
// Check to see if bucket ranges, counts and tallies in the snapshot are
// consistent with the bucket ranges and checksums in our histogram. This can
// produce a false-alarm if a race occurred in the reading of the data during
// a SnapShot process, but should otherwise be false at all times (unless we
// have memory over-writes, or DRAM failures).
virtual Inconsistencies FindCorruption(const HistogramSamples& samples) const;
//----------------------------------------------------------------------------
// Accessors for factory constuction, serialization and testing.
//----------------------------------------------------------------------------
Sample declared_min() const { return declared_min_; }
Sample declared_max() const { return declared_max_; }
virtual Sample ranges(size_t i) const;
virtual size_t bucket_count() const;
const BucketRanges* bucket_ranges() const { return bucket_ranges_; }
// This function validates histogram construction arguments. It returns false
// if some of the arguments are totally bad.
// Note. Currently it allow some bad input, e.g. 0 as minimum, but silently
// converts it to good input: 1.
// TODO(kaiwang): Be more restrict and return false for any bad input, and
// make this a readonly validating function.
static bool InspectConstructionArguments(const std::string& name,
Sample* minimum,
Sample* maximum,
size_t* bucket_count);
// HistogramBase implementation:
virtual HistogramType GetHistogramType() const override;
virtual bool HasConstructionArguments(Sample minimum,
Sample maximum,
size_t bucket_count) const override;
virtual void Add(Sample value) override;
virtual scoped_ptr<HistogramSamples> SnapshotSamples() const override;
virtual void WriteHTMLGraph(std::string* output) const override;
virtual void WriteAscii(std::string* output) const override;
protected:
// |bucket_count| and |ranges| should contain the underflow and overflow
// buckets. See top comments for example.
Histogram(const std::string& name,
Sample minimum,
Sample maximum,
size_t bucket_count,
const BucketRanges* ranges);
virtual ~Histogram();
// Serialize the histogram's ranges to |*pickle|, returning true on success.
// Most subclasses can leave this no-op implementation, but some will want to
// override it, especially if the ranges cannot be re-derived from other
// serialized parameters.
virtual bool SerializeRanges(Pickle* pickle) const;
// Method to override to skip the display of the i'th bucket if it's empty.
virtual bool PrintEmptyBucket(size_t index) const;
// Get normalized size, relative to the ranges(i).
virtual double GetBucketSize(Count current, size_t i) const;
// Return a string description of what goes in a given bucket.
// Most commonly this is the numeric value, but in derived classes it may
// be a name (or string description) given to the bucket.
virtual const std::string GetAsciiBucketRange(size_t it) const;
private:
// Allow tests to corrupt our innards for testing purposes.
FRIEND_TEST_ALL_PREFIXES(HistogramTest, BoundsTest);
FRIEND_TEST_ALL_PREFIXES(HistogramTest, BucketPlacementTest);
FRIEND_TEST_ALL_PREFIXES(HistogramTest, CorruptBucketBounds);
FRIEND_TEST_ALL_PREFIXES(HistogramTest, CorruptSampleCounts);
FRIEND_TEST_ALL_PREFIXES(HistogramTest, NameMatchTest);
friend class StatisticsRecorder; // To allow it to delete duplicates.
friend class StatisticsRecorderTest;
// Implementation of SnapshotSamples function.
scoped_ptr<SampleVector> SnapshotSampleVector() const;
//----------------------------------------------------------------------------
// Helpers for emitting Ascii graphic. Each method appends data to output.
void WriteAsciiImpl(bool graph_it,
const std::string& newline,
std::string* output) const;
// Find out how large (graphically) the largest bucket will appear to be.
double GetPeakBucketSize(const SampleVector& samples) const;
// Write a common header message describing this histogram.
void WriteAsciiHeader(const SampleVector& samples,
Count sample_count,
std::string* output) const;
// Write information about previous, current, and next buckets.
// Information such as cumulative percentage, etc.
void WriteAsciiBucketContext(const int64 past, const Count current,
const int64 remaining, const size_t i,
std::string* output) const;
// Write textual description of the bucket contents (relative to histogram).
// Output is the count in the buckets, as well as the percentage.
void WriteAsciiBucketValue(Count current, double scaled_sum,
std::string* output) const;
// Produce actual graph (set of blank vs non blank char's) for a bucket.
void WriteAsciiBucketGraph(double current_size, double max_size,
std::string* output) const;
// WriteJSON calls these.
virtual void GetParameters(DictionaryValue* params) const override;
virtual void GetCountAndBucketData(Count* count,
ListValue* buckets) const override;
// Does not own this object. Should get from StatisticsRecorder.
const BucketRanges* bucket_ranges_;
Sample declared_min_; // Less than this goes into counts_[0]
Sample declared_max_; // Over this goes into counts_[bucket_count_ - 1].
size_t bucket_count_; // Dimension of counts_[].
// Finally, provide the state that changes with the addition of each new
// sample.
scoped_ptr<SampleVector> samples_;
DISALLOW_COPY_AND_ASSIGN(Histogram);
};
//------------------------------------------------------------------------------
// LinearHistogram is a more traditional histogram, with evenly spaced
// buckets.
class BASE_EXPORT LinearHistogram : public Histogram {
public:
virtual ~LinearHistogram();
/* minimum should start from 1. 0 is as minimum is invalid. 0 is an implicit
default underflow bucket. */
static Histogram* FactoryGet(const std::string& name,
Sample minimum,
Sample maximum,
size_t bucket_count,
int32 flags);
static Histogram* FactoryTimeGet(const std::string& name,
TimeDelta minimum,
TimeDelta maximum,
size_t bucket_count,
int32 flags);
// Create a LinearHistogram and store a list of number/text values for use in
// writing the histogram graph.
// |descriptions| can be NULL, which means no special descriptions to set. If
// it's not NULL, the last element in the array must has a NULL in its
// "description" field.
static Histogram* FactoryGetWithRangeDescription(
const std::string& name,
Sample minimum,
Sample maximum,
size_t bucket_count,
int32 flags,
const DescriptionPair descriptions[]);
static void InitializeBucketRanges(Sample minimum,
Sample maximum,
size_t bucket_count,
BucketRanges* ranges);
// Overridden from Histogram:
virtual HistogramType GetHistogramType() const override;
protected:
LinearHistogram(const std::string& name,
Sample minimum,
Sample maximum,
size_t bucket_count,
const BucketRanges* ranges);
virtual double GetBucketSize(Count current, size_t i) const override;
// If we have a description for a bucket, then return that. Otherwise
// let parent class provide a (numeric) description.
virtual const std::string GetAsciiBucketRange(size_t i) const override;
// Skip printing of name for numeric range if we have a name (and if this is
// an empty bucket).
virtual bool PrintEmptyBucket(size_t index) const override;
private:
// For some ranges, we store a printable description of a bucket range.
// If there is no desciption, then GetAsciiBucketRange() uses parent class
// to provide a description.
typedef std::map<Sample, std::string> BucketDescriptionMap;
BucketDescriptionMap bucket_description_;
DISALLOW_COPY_AND_ASSIGN(LinearHistogram);
};
//------------------------------------------------------------------------------
// BooleanHistogram is a histogram for booleans.
class BASE_EXPORT BooleanHistogram : public LinearHistogram {
public:
static Histogram* FactoryGet(const std::string& name, int32 flags);
virtual HistogramType GetHistogramType() const override;
virtual void AddBoolean(bool value) override;
private:
BooleanHistogram(const std::string& name, const BucketRanges* ranges);
DISALLOW_COPY_AND_ASSIGN(BooleanHistogram);
};
//------------------------------------------------------------------------------
// CustomHistogram is a histogram for a set of custom integers.
class BASE_EXPORT CustomHistogram : public Histogram {
public:
// |custom_ranges| contains a vector of limits on ranges. Each limit should be
// > 0 and < kSampleType_MAX. (Currently 0 is still accepted for backward
// compatibility). The limits can be unordered or contain duplication, but
// client should not depend on this.
static Histogram* FactoryGet(const std::string& name,
const std::vector<Sample>& custom_ranges,
int32 flags);
// Overridden from Histogram:
virtual HistogramType GetHistogramType() const override;
// Helper method for transforming an array of valid enumeration values
// to the std::vector<int> expected by HISTOGRAM_CUSTOM_ENUMERATION.
// This function ensures that a guard bucket exists right after any
// valid sample value (unless the next higher sample is also a valid value),
// so that invalid samples never fall into the same bucket as valid samples.
// TODO(kaiwang): Change name to ArrayToCustomEnumRanges.
static std::vector<Sample> ArrayToCustomRanges(const Sample* values,
size_t num_values);
// Helper for deserializing CustomHistograms. |*ranges| should already be
// correctly sized before this call. Return true on success.
static bool DeserializeRanges(PickleIterator* iter,
std::vector<Sample>* ranges);
protected:
CustomHistogram(const std::string& name,
const BucketRanges* ranges);
virtual bool SerializeRanges(Pickle* pickle) const override;
virtual double GetBucketSize(Count current, size_t i) const override;
private:
static bool ValidateCustomRanges(const std::vector<Sample>& custom_ranges);
static BucketRanges* CreateBucketRangesFromCustomRanges(
const std::vector<Sample>& custom_ranges);
DISALLOW_COPY_AND_ASSIGN(CustomHistogram);
};
} // namespace base
#endif // BASE_METRICS_HISTOGRAM_H_