blob: a8591bb528223f37a69fcf717325fc46a8b41131 [file] [log] [blame]
// Copyright 2017 Google Inc. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "starboard/common/rwlock.h"
#include "starboard/configuration.h"
#include "starboard/nplb/thread_helpers.h"
#include "starboard/thread.h"
#include "testing/gtest/include/gtest/gtest.h"
// Increasing threads by 2x increases testing time by 3x, due to write
// thread starvation. The test that relies on this number already runs
// at about ~300ms.
#define NUM_STRESS_THREADS 4
namespace starboard {
namespace nplb {
// Basic usage of RWLock.
TEST(RWLock, Use) {
RWLock rw_lock;
// Read lock means we can acquire it multiple times.
rw_lock.AcquireReadLock();
rw_lock.AcquireReadLock();
rw_lock.ReleaseReadLock();
rw_lock.ReleaseReadLock();
rw_lock.AcquireWriteLock();
rw_lock.ReleaseWriteLock();
}
// Enters a RWLock as a reader and then increments a counter indicating that it
class ReadAndSignalTestThread : public AbstractTestThread {
public:
struct SharedData {
SharedData()
: read_count(0), sema_read_acquisition(0), sema_finish_run(0) {}
int read_count;
RWLock rw_mutex;
Semaphore sema_read_acquisition;
Semaphore sema_finish_run;
};
explicit ReadAndSignalTestThread(SharedData* shared_data)
: shared_data_(shared_data) {}
void Run() override {
shared_data_->rw_mutex.AcquireReadLock();
// Indicate that this thread has entered the read state.
shared_data_->read_count++;
// Signals the this thread has finished entering the read state.
shared_data_->sema_read_acquisition.Put();
// Now waiting for the thread to allow us to finish.
shared_data_->sema_finish_run.Take();
shared_data_->read_count--;
shared_data_->rw_mutex.ReleaseReadLock();
}
private:
SharedData* shared_data_;
};
// Tests the expectation that two reader threads can enter a rw_lock.
TEST(RWLock, ReadAcquisitionTwoThreads) {
ReadAndSignalTestThread::SharedData data;
ReadAndSignalTestThread read_thread(&data);
read_thread.Start();
// Wait until the reader thread has finished entering into the read state.
data.sema_read_acquisition.Take();
EXPECT_EQ(1, data.read_count);
// The rw_lock is still being held now, therefore we test that we can
// acquire another access to the read.
data.rw_mutex.AcquireReadLock();
data.rw_mutex.ReleaseReadLock();
// Release the other thread so that it can exit its run function.
data.sema_finish_run.Put();
read_thread.Join();
EXPECT_EQ(0, data.read_count);
}
// Tests the expectation that a read lock will be blocked for X milliseconds
// while the thread is holding the write lock.
class ThreadHoldsWriteLockForTime : public AbstractTestThread {
public:
struct SharedData {
explicit SharedData(SbTime time_hold) : time_to_hold(time_hold) {}
SbTime time_to_hold;
Semaphore signal_write_lock;
RWLock rw_lock;
};
explicit ThreadHoldsWriteLockForTime(SharedData* shared_data)
: shared_data_(shared_data) {}
void Run() override {
ScopedWriteLock write_lock(&shared_data_->rw_lock);
shared_data_->signal_write_lock.Put();
SbThreadSleep(shared_data_->time_to_hold);
}
private:
SharedData* shared_data_;
};
TEST(RWLock, HoldsLockForTime) {
const SbTime kTimeToHold = kSbTimeMillisecond * 5;
const SbTime kAllowedError = kSbTimeMillisecond * 10;
ThreadHoldsWriteLockForTime::SharedData shared_data(kTimeToHold);
ThreadHoldsWriteLockForTime thread(&shared_data);
thread.Start();
shared_data.signal_write_lock.Take(); // write lock was taken, start timer.
const SbTime start_time = SbTimeGetMonotonicNow();
shared_data.rw_lock.AcquireReadLock(); // Blocked by thread for kTimeToHold.
shared_data.rw_lock.ReleaseReadLock();
const SbTime delta_time = SbTimeGetMonotonicNow() - start_time;
thread.Join();
SbTime time_diff = delta_time - kTimeToHold;
if (time_diff < 0) {
time_diff = -time_diff;
}
EXPECT_LT(time_diff, kAllowedError);
}
// This thread tests RWLock by generating numbers and writing to a
// shared set<int32_t>. Additionally readbacks are interleaved in writes.
class ThreadRWLockStressTest : public AbstractTestThread {
public:
struct SharedData {
RWLock rw_lock;
std::set<int32_t> data;
};
ThreadRWLockStressTest(int32_t begin_value,
int32_t end_value,
SharedData* shared_data)
: begin_value_(begin_value),
end_value_(end_value),
shared_data_(shared_data) {}
void Run() override {
SbThread current_thread = SbThreadGetCurrent();
SB_UNREFERENCED_PARAMETER(current_thread);
for (int32_t i = begin_value_; i < end_value_; ++i) {
DoReadAll();
DoWrite(i);
}
}
private:
void DoReadAll() {
typedef std::set<int32_t>::const_iterator ConstIterator;
volatile int32_t dummy = 0;
shared_data_->rw_lock.AcquireReadLock();
for (ConstIterator it = shared_data_->data.begin();
it != shared_data_->data.end(); ++it) {
dummy = *it;
}
shared_data_->rw_lock.ReleaseReadLock();
}
void DoWrite(int32_t value) {
shared_data_->rw_lock.AcquireWriteLock();
const bool added = shared_data_->data.insert(value).second;
shared_data_->rw_lock.ReleaseWriteLock();
ASSERT_TRUE(added);
}
int32_t begin_value_;
int32_t end_value_;
SharedData* shared_data_;
};
TEST(RWLock, RWLockStressTest) {
const int32_t kNumValuesEachThread = 500;
// Expected number of values that will be generated by all threads.
const size_t kTotalValuesGenerated =
kNumValuesEachThread * NUM_STRESS_THREADS;
ThreadRWLockStressTest::SharedData shared_data;
std::vector<AbstractTestThread*> threads;
for (int i = 0; i < NUM_STRESS_THREADS; ++i) {
int32_t start_value = i * kNumValuesEachThread;
int32_t end_value = (i + 1) * kNumValuesEachThread;
ThreadRWLockStressTest* thread =
new ThreadRWLockStressTest(start_value, end_value, &shared_data);
threads.push_back(thread);
}
for (size_t i = 0; i < threads.size(); ++i) {
threads[i]->Start();
}
for (size_t i = 0; i < threads.size(); ++i) {
threads[i]->Join();
delete threads[i];
}
std::vector<int32_t> values(shared_data.data.begin(), shared_data.data.end());
// We expect that the generators will generate [0...kTotalValuesGenerated).
ASSERT_EQ(kTotalValuesGenerated, values.size());
for (size_t i = 0; i < values.size(); ++i) {
int32_t value = values[i];
ASSERT_EQ(value, i);
}
}
} // namespace nplb
} // namespace starboard