blob: 38473cd04960f91f6b0c904778213fb6144197a8 [file] [log] [blame]
#!/usr/bin/env python
# coding: utf-8
# Copyright 2014 The Crashpad Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
from __future__ import print_function
import argparse
import os
import pipes
import posixpath
import re
import subprocess
import sys
import tempfile
import uuid
CRASHPAD_DIR = os.path.join(os.path.dirname(os.path.abspath(__file__)),
os.pardir)
IS_WINDOWS_HOST = sys.platform.startswith('win')
def _FindGNFromBinaryDir(binary_dir):
"""Attempts to determine the path to a GN binary used to generate the build
files in the given binary_dir. This is necessary because `gn` might not be in
the path or might be in a non-standard location, particularly on build
machines."""
build_ninja = os.path.join(binary_dir, 'build.ninja')
if os.path.isfile(build_ninja):
with open(build_ninja, 'rb') as f:
# Look for the always-generated regeneration rule of the form:
#
# rule gn
# command = <gn binary> ... arguments ...
#
# to extract the gn binary's full path.
found_rule_gn = False
for line in f:
if line.strip() == 'rule gn':
found_rule_gn = True
continue
if found_rule_gn:
if len(line) == 0 or line[0] != ' ':
return None
if line.startswith(' command = '):
gn_command_line_parts = line.strip().split(' ')
if len(gn_command_line_parts) > 2:
return os.path.join(binary_dir, gn_command_line_parts[2])
return None
def _BinaryDirTargetOS(binary_dir):
"""Returns the apparent target OS of binary_dir, or None if none appear to be
explicitly specified."""
gn_path = _FindGNFromBinaryDir(binary_dir)
if gn_path:
# Look for a GN “target_os”.
popen = subprocess.Popen([gn_path, '--root=' + CRASHPAD_DIR,
'args', binary_dir,
'--list=target_os', '--short'],
shell=IS_WINDOWS_HOST,
stdout=subprocess.PIPE, stderr=open(os.devnull))
value = popen.communicate()[0]
if popen.returncode == 0:
match = re.match('target_os = "(.*)"$', value.decode('utf-8'))
if match:
return match.group(1)
# For GYP with Ninja, look for the appearance of “linux-android” in the path
# to ar. This path is configured by gyp_crashpad_android.py.
build_ninja_path = os.path.join(binary_dir, 'build.ninja')
if os.path.exists(build_ninja_path):
with open(build_ninja_path) as build_ninja_file:
build_ninja_content = build_ninja_file.read()
match = re.search('-linux-android(eabi)?-ar$',
build_ninja_content,
re.MULTILINE)
if match:
return 'android'
return None
def _EnableVTProcessingOnWindowsConsole():
"""Enables virtual terminal processing for ANSI/VT100-style escape sequences
on a Windows console attached to standard output. Returns True on success.
Returns False if standard output is not a console or if virtual terminal
processing is not supported. The feature was introduced in Windows 10.
"""
import pywintypes
import win32console
import winerror
stdout_console = win32console.GetStdHandle(win32console.STD_OUTPUT_HANDLE)
try:
console_mode = stdout_console.GetConsoleMode()
except pywintypes.error as e:
if e.winerror == winerror.ERROR_INVALID_HANDLE:
# Standard output is not a console.
return False
raise
try:
# From <wincon.h>. This would be
# win32console.ENABLE_VIRTUAL_TERMINAL_PROCESSING, but it’s too new to be
# defined there.
ENABLE_VIRTUAL_TERMINAL_PROCESSING = 0x0004
stdout_console.SetConsoleMode(console_mode |
ENABLE_VIRTUAL_TERMINAL_PROCESSING)
except pywintypes.error as e:
if e.winerror == winerror.ERROR_INVALID_PARAMETER:
# ANSI/VT100-style escape sequence processing isn’t supported before
# Windows 10.
return False
raise
return True
def _RunOnAndroidTarget(binary_dir, test, android_device, extra_command_line):
local_test_path = os.path.join(binary_dir, test)
MAYBE_UNSUPPORTED_TESTS = (
'crashpad_client_test',
'crashpad_handler_test',
'crashpad_minidump_test',
'crashpad_snapshot_test',
)
if not os.path.exists(local_test_path) and test in MAYBE_UNSUPPORTED_TESTS:
print('This test is not present and may not be supported, skipping')
return
def _adb(*args):
# Flush all of this script’s own buffered stdout output before running adb,
# which will likely produce its own output on stdout.
sys.stdout.flush()
adb_command = ['adb', '-s', android_device]
adb_command.extend(args)
subprocess.check_call(adb_command, shell=IS_WINDOWS_HOST)
def _adb_push(sources, destination):
args = list(sources)
args.append(destination)
_adb('push', *args)
def _adb_shell(command_args, env={}):
# Build a command to execute via “sh -c” instead of invoking it directly.
# Here’s why:
#
# /system/bin/env isn’t normally present prior to Android 6.0 (M), where
# toybox was introduced (Android platform/manifest 9a2c01e8450b). Instead,
# set environment variables by using the shell’s internal “export” command.
#
# adbd prior to Android 7.0 (N), and the adb client prior to SDK
# platform-tools version 24, don’t know how to communicate a shell command’s
# exit status. This was added in Android platform/system/core 606835ae5c4b).
# With older adb servers and clients, adb will “exit 0” indicating success
# even if the command failed on the device. This makes
# subprocess.check_call() semantics difficult to implement directly. As a
# workaround, have the device send the command’s exit status over stdout and
# pick it back up in this function.
#
# Both workarounds are implemented by giving the device a simple script,
# which adbd will run as an “sh -c” argument.
adb_command = ['adb', '-s', android_device, 'shell']
script_commands = []
for k, v in env.items():
script_commands.append('export %s=%s' % (pipes.quote(k), pipes.quote(v)))
script_commands.extend([
' '.join(pipes.quote(x) for x in command_args),
'status=${?}',
'echo "status=${status}"',
'exit ${status}'])
adb_command.append('; '.join(script_commands))
child = subprocess.Popen(adb_command,
shell=IS_WINDOWS_HOST,
stdin=open(os.devnull),
stdout=subprocess.PIPE)
FINAL_LINE_RE = re.compile('status=(\d+)$')
final_line = None
while True:
# Use readline so that the test output appears “live” when running.
data = child.stdout.readline().decode('utf-8')
if data == '':
break
if final_line is not None:
# It wasn’t really the final line.
print(final_line, end='')
final_line = None
if FINAL_LINE_RE.match(data.rstrip()):
final_line = data
else:
print(data, end='')
if final_line is None:
# Maybe there was some stderr output after the end of stdout. Old versions
# of adb, prior to when the exit status could be communicated, smush the
# two together.
raise subprocess.CalledProcessError(-1, adb_command)
status = int(FINAL_LINE_RE.match(final_line.rstrip()).group(1))
if status != 0:
raise subprocess.CalledProcessError(status, adb_command)
child.wait()
if child.returncode != 0:
raise subprocess.CalledProcessError(subprocess.returncode, adb_command)
# /system/bin/mktemp isn’t normally present prior to Android 6.0 (M), where
# toybox was introduced (Android platform/manifest 9a2c01e8450b). Fake it with
# a host-generated name. This won’t retry if the name is in use, but with 122
# bits of randomness, it should be OK. This uses “mkdir” instead of “mkdir -p”
# because the latter will not indicate failure if the directory already
# exists.
device_temp_dir = '/data/local/tmp/%s.%s' % (test, uuid.uuid4().hex)
_adb_shell(['mkdir', device_temp_dir])
try:
# Specify test dependencies that must be pushed to the device. This could be
# determined automatically in a GN build, following the example used for
# Fuchsia. Since nothing like that exists for GYP, hard-code it for
# supported tests.
test_build_artifacts = [test, 'crashpad_handler']
test_data = ['test/test_paths_test_data_root.txt']
if test == 'crashpad_test_test':
test_build_artifacts.append(
'crashpad_test_test_multiprocess_exec_test_child')
elif test == 'crashpad_util_test':
test_data.append('util/net/testdata/')
# Establish the directory structure on the device.
device_out_dir = posixpath.join(device_temp_dir, 'out')
device_mkdirs = [device_out_dir]
for source_path in test_data:
# A trailing slash could reasonably mean to copy an entire directory, but
# will interfere with what’s needed from the path split. All parent
# directories of any source_path need to be be represented in
# device_mkdirs, but it’s important that no source_path itself wind up in
# device_mkdirs, even if source_path names a directory, because that would
# cause the “adb push” of the directory below to behave incorrectly.
if source_path.endswith(posixpath.sep):
source_path = source_path[:-1]
device_source_path = posixpath.join(device_temp_dir, source_path)
device_mkdir = posixpath.split(device_source_path)[0]
if device_mkdir not in device_mkdirs:
device_mkdirs.append(device_mkdir)
adb_mkdir_command = ['mkdir', '-p']
adb_mkdir_command.extend(device_mkdirs)
_adb_shell(adb_mkdir_command)
# Push the test binary and any other build output to the device.
local_test_build_artifacts = []
for artifact in test_build_artifacts:
local_test_build_artifacts.append(os.path.join(binary_dir, artifact))
_adb_push(local_test_build_artifacts, device_out_dir)
# Push test data to the device.
for source_path in test_data:
_adb_push([os.path.join(CRASHPAD_DIR, source_path)],
posixpath.join(device_temp_dir, source_path))
# Run the test on the device. Pass the test data root in the environment.
#
# Because the test will not run with its standard output attached to a
# pseudo-terminal device, gtest will not normally enable colored output, so
# mimic gtest’s own logic for deciding whether to enable color by checking
# this script’s own standard output connection. The whitelist of TERM values
# comes from gtest googletest/src/gtest.cc
# testing::internal::ShouldUseColor().
env = {'CRASHPAD_TEST_DATA_ROOT': device_temp_dir}
gtest_color = os.environ.get('GTEST_COLOR')
if gtest_color in ('auto', None):
if (sys.stdout.isatty() and
(os.environ.get('TERM') in
('xterm', 'xterm-color', 'xterm-256color', 'screen',
'screen-256color', 'tmux', 'tmux-256color', 'rxvt-unicode',
'rxvt-unicode-256color', 'linux', 'cygwin') or
(IS_WINDOWS_HOST and _EnableVTProcessingOnWindowsConsole()))):
gtest_color = 'yes'
else:
gtest_color = 'no'
env['GTEST_COLOR'] = gtest_color
_adb_shell([posixpath.join(device_out_dir, test)] + extra_command_line, env)
finally:
_adb_shell(['rm', '-rf', device_temp_dir])
def _GetFuchsiaSDKRoot():
arch = 'mac-amd64' if sys.platform == 'darwin' else 'linux-amd64'
return os.path.join(CRASHPAD_DIR, 'third_party', 'fuchsia', 'sdk', arch)
def _GenerateFuchsiaRuntimeDepsFiles(binary_dir, tests):
"""Ensures a <binary_dir>/<test>.runtime_deps file exists for each test."""
targets_file = os.path.join(binary_dir, 'targets.txt')
with open(targets_file, 'wb') as f:
f.write('//:' + '\n//:'.join(tests) + '\n')
gn_path = _FindGNFromBinaryDir(binary_dir)
subprocess.check_call(
[gn_path, '--root=' + CRASHPAD_DIR, 'gen', binary_dir,
'--runtime-deps-list-file=' + targets_file])
# Run again so that --runtime-deps-list-file isn't in the regen rule. See
# https://crbug.com/814816.
subprocess.check_call(
[gn_path, '--root=' + CRASHPAD_DIR, 'gen', binary_dir])
def _HandleOutputFromFuchsiaLogListener(process, done_message):
"""Pass through the output from |process| (which should be an instance of
Fuchsia's loglistener) until a special termination |done_message| is
encountered.
Also attempts to determine if any tests failed by inspecting the log output,
and returns False if there were failures.
"""
success = True
while True:
line = process.stdout.readline().rstrip()
if 'FAILED TEST' in line:
success = False
elif done_message in line and 'echo ' not in line:
break
print(line)
return success
def _RunOnFuchsiaTarget(binary_dir, test, device_name, extra_command_line):
"""Runs the given Fuchsia |test| executable on the given |device_name|. The
device must already be booted.
Copies the executable and its runtime dependencies as specified by GN to the
target in /tmp using `netcp`, runs the binary on the target, and logs output
back to stdout on this machine via `loglistener`.
"""
sdk_root = _GetFuchsiaSDKRoot()
# Run loglistener and filter the output to know when the test is done.
loglistener_process = subprocess.Popen(
[os.path.join(sdk_root, 'tools', 'loglistener'), device_name],
stdout=subprocess.PIPE, stdin=open(os.devnull), stderr=open(os.devnull))
runtime_deps_file = os.path.join(binary_dir, test + '.runtime_deps')
with open(runtime_deps_file, 'rb') as f:
runtime_deps = f.read().splitlines()
def netruncmd(*args):
"""Runs a list of commands on the target device. Each command is escaped
by using pipes.quote(), and then each command is chained by shell ';'.
"""
netruncmd_path = os.path.join(sdk_root, 'tools', 'netruncmd')
final_args = ' ; '.join(' '.join(pipes.quote(x) for x in command)
for command in args)
subprocess.check_call([netruncmd_path, device_name, final_args])
try:
unique_id = uuid.uuid4().hex
test_root = '/tmp/%s_%s' % (test, unique_id)
tmp_root = test_root + '/tmp'
staging_root = test_root + '/pkg'
# Make a staging directory tree on the target.
directories_to_create = [tmp_root,
'%s/bin' % staging_root,
'%s/assets' % staging_root]
netruncmd(['mkdir', '-p'] + directories_to_create)
def netcp(local_path):
"""Uses `netcp` to copy a file or directory to the device. Files located
inside the build dir are stored to /pkg/bin, otherwise to /pkg/assets.
.so files are stored somewhere completely different, into /boot/lib (!).
This is because the loader service does not yet correctly handle the
namespace in which the caller is being run, and so can only load .so files
from a couple hardcoded locations, the only writable one of which is
/boot/lib, so we copy all .so files there. This bug is filed upstream as
ZX-1619.
"""
in_binary_dir = local_path.startswith(binary_dir + '/')
if in_binary_dir:
if local_path.endswith('.so'):
target_path = os.path.join(
'/boot/lib', local_path[len(binary_dir)+1:])
else:
target_path = os.path.join(
staging_root, 'bin', local_path[len(binary_dir)+1:])
else:
relative_path = os.path.relpath(local_path, CRASHPAD_DIR)
target_path = os.path.join(staging_root, 'assets', relative_path)
netcp_path = os.path.join(sdk_root, 'tools', 'netcp')
subprocess.check_call([netcp_path, local_path,
device_name + ':' + target_path],
stderr=open(os.devnull))
# Copy runtime deps into the staging tree.
for dep in runtime_deps:
local_path = os.path.normpath(os.path.join(binary_dir, dep))
if os.path.isdir(local_path):
for root, dirs, files in os.walk(local_path):
for f in files:
netcp(os.path.join(root, f))
else:
netcp(local_path)
done_message = 'TERMINATED: ' + unique_id
namespace_command = [
'namespace', '/pkg=' + staging_root, '/tmp=' + tmp_root, '/svc=/svc',
'--replace-child-argv0=/pkg/bin/' + test, '--',
staging_root + '/bin/' + test] + extra_command_line
netruncmd(namespace_command, ['echo', done_message])
success = _HandleOutputFromFuchsiaLogListener(
loglistener_process, done_message)
if not success:
raise subprocess.CalledProcessError(1, test)
finally:
netruncmd(['rm', '-rf', test_root])
def _RunOnIOSTarget(binary_dir, test, is_xcuitest=False):
"""Runs the given iOS |test| app on iPhone 8 with the default OS version."""
def xctest(binary_dir, test):
"""Returns a dict containing the xctestrun data needed to run an
XCTest-based test app."""
test_path = os.path.join(CRASHPAD_DIR, binary_dir)
module_data = {
'TestBundlePath': os.path.join(test_path, test + '_module.xctest'),
'TestHostPath': os.path.join(test_path, test + '.app'),
'TestingEnvironmentVariables': {
'DYLD_FRAMEWORK_PATH': '__TESTROOT__/Debug-iphonesimulator:',
'DYLD_INSERT_LIBRARIES': (
'__PLATFORMS__/iPhoneSimulator.platform/Developer/'
'usr/lib/libXCTestBundleInject.dylib'),
'DYLD_LIBRARY_PATH': '__TESTROOT__/Debug-iphonesimulator',
'IDEiPhoneInternalTestBundleName': test + '.app',
'XCInjectBundleInto': '__TESTHOST__/' + test,
}
}
return { test: module_data }
def xcuitest(binary_dir, test):
"""Returns a dict containing the xctestrun data needed to run an
XCUITest-based test app."""
test_path = os.path.join(CRASHPAD_DIR, binary_dir)
runner_path = os.path.join(test_path, test + '_module-Runner.app')
bundle_path = os.path.join(runner_path, 'PlugIns', test + '_module.xctest')
target_app_path = os.path.join(test_path, test + '.app')
module_data = {
'IsUITestBundle': True,
'IsXCTRunnerHostedTestBundle': True,
'TestBundlePath': bundle_path,
'TestHostPath': runner_path,
'UITargetAppPath': target_app_path,
'DependentProductPaths': [ bundle_path, runner_path, target_app_path ],
'TestingEnvironmentVariables': {
'DYLD_FRAMEWORK_PATH': '__TESTROOT__/Debug-iphonesimulator:',
'DYLD_INSERT_LIBRARIES': (
'__PLATFORMS__/iPhoneSimulator.platform/Developer/'
'usr/lib/libXCTestBundleInject.dylib'),
'DYLD_LIBRARY_PATH': '__TESTROOT__/Debug-iphonesimulator',
'XCInjectBundleInto': '__TESTHOST__/' + test + '_module-Runner',
},
}
return { test: module_data }
with tempfile.NamedTemporaryFile() as f:
import plistlib
xctestrun_path = f.name
print(xctestrun_path)
if is_xcuitest:
plistlib.writePlist(xcuitest(binary_dir, test), xctestrun_path)
else:
plistlib.writePlist(xctest(binary_dir, test), xctestrun_path)
subprocess.check_call(['xcodebuild', 'test-without-building',
'-xctestrun', xctestrun_path, '-destination',
'platform=iOS Simulator,name=iPhone 8'])
# This script is primarily used from the waterfall so that the list of tests
# that are run is maintained in-tree, rather than in a separate infrastructure
# location in the recipe.
def main(args):
parser = argparse.ArgumentParser(description='Run Crashpad unittests.')
parser.add_argument('binary_dir', help='Root of build dir')
parser.add_argument('test', nargs='*', help='Specific test(s) to run.')
parser.add_argument('--gtest_filter',
help='GTest filter applied to GTest binary runs.')
args = parser.parse_args()
# Tell 64-bit Windows tests where to find 32-bit test executables, for
# cross-bitted testing. This relies on the fact that the GYP build by default
# uses {Debug,Release} for the 32-bit build and {Debug,Release}_x64 for the
# 64-bit build. This is not a universally valid assumption, and if it’s not
# met, 64-bit tests that require 32-bit build output will disable themselves
# dynamically.
if (sys.platform == 'win32' and args.binary_dir.endswith('_x64') and
'CRASHPAD_TEST_32_BIT_OUTPUT' not in os.environ):
binary_dir_32 = args.binary_dir[:-4]
if os.path.isdir(binary_dir_32):
os.environ['CRASHPAD_TEST_32_BIT_OUTPUT'] = binary_dir_32
target_os = _BinaryDirTargetOS(args.binary_dir)
is_android = target_os == 'android'
is_fuchsia = target_os == 'fuchsia'
is_ios = target_os == 'ios'
tests = [
'crashpad_client_test',
'crashpad_handler_test',
'crashpad_minidump_test',
'crashpad_snapshot_test',
'crashpad_test_test',
'crashpad_util_test',
]
if is_android:
android_device = os.environ.get('ANDROID_DEVICE')
if not android_device:
adb_devices = subprocess.check_output(['adb', 'devices'],
shell=IS_WINDOWS_HOST)
devices = []
for line in adb_devices.splitlines():
line = line.decode('utf-8')
if (line == 'List of devices attached' or
re.match('^\* daemon .+ \*$', line) or
line == ''):
continue
(device, ignore) = line.split('\t')
devices.append(device)
if len(devices) != 1:
print("Please set ANDROID_DEVICE to your device's id", file=sys.stderr)
return 2
android_device = devices[0]
print('Using autodetected Android device:', android_device)
elif is_fuchsia:
zircon_nodename = os.environ.get('ZIRCON_NODENAME')
if not zircon_nodename:
netls = os.path.join(_GetFuchsiaSDKRoot(), 'tools', 'netls')
popen = subprocess.Popen([netls, '--nowait'], stdout=subprocess.PIPE)
devices = popen.communicate()[0].splitlines()
if popen.returncode != 0 or len(devices) != 1:
print("Please set ZIRCON_NODENAME to your device's hostname",
file=sys.stderr)
return 2
zircon_nodename = devices[0].strip().split()[1]
print('Using autodetected Fuchsia device:', zircon_nodename)
_GenerateFuchsiaRuntimeDepsFiles(
args.binary_dir, [t for t in tests if not t.endswith('.py')])
elif is_ios:
tests.append('ios_crash_xcuitests')
elif IS_WINDOWS_HOST:
tests.append('snapshot/win/end_to_end_test.py')
if args.test:
for t in args.test:
if t not in tests:
print('Unrecognized test:', t, file=sys.stderr)
return 3
tests = args.test
for test in tests:
print('-' * 80)
print(test)
print('-' * 80)
if test.endswith('.py'):
subprocess.check_call(
[sys.executable, os.path.join(CRASHPAD_DIR, test), args.binary_dir])
else:
extra_command_line = []
if args.gtest_filter:
extra_command_line.append('--gtest_filter=' + args.gtest_filter)
if is_android:
_RunOnAndroidTarget(args.binary_dir, test, android_device,
extra_command_line)
elif is_fuchsia:
_RunOnFuchsiaTarget(args.binary_dir, test, zircon_nodename,
extra_command_line)
elif is_ios:
_RunOnIOSTarget(args.binary_dir, test,
is_xcuitest=test.startswith('ios'))
else:
subprocess.check_call([os.path.join(args.binary_dir, test)] +
extra_command_line)
return 0
if __name__ == '__main__':
sys.exit(main(sys.argv[1:]))