#
# Copyright 2018 The Cobalt Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""Raspi implementation of Starboard launcher abstraction."""

import functools
import logging
import os
import re
import signal
import six
import sys
import threading
import time

import pexpect
from starboard.tools import abstract_launcher


# pylint: disable=unused-argument
def _SigIntOrSigTermHandler(signum, frame):
  """Clean up and exit with status |signum|.

  Args:
    signum: Signal number that triggered this callback.  Passed in when the
      signal handler is called by python runtime.
    frame: Current stack frame.  Passed in when the signal handler is called by
      python runtime.
  """
  sys.exit(signum)


# First call returns True, otherwise return false.
def FirstRun():
  v = globals()
  if 'first_run' not in v:
    v['first_run'] = False
    return True
  return False


class Launcher(abstract_launcher.AbstractLauncher):
  """Class for launching Cobalt/tools on Raspi."""

  _STARTUP_TIMEOUT_SECONDS = 1800

  _RASPI_USERNAME = 'pi'
  _RASPI_PASSWORD = 'raspberry'
  _SSH_LOGIN_SIGNAL = 'cobalt-launcher-login-success'
  _SSH_SLEEP_SIGNAL = 'cobalt-launcher-done-sleeping'
  _RASPI_PROMPT = 'pi@raspberrypi:'

  # pexpect times out each second to allow Kill to quickly stop a test run
  _PEXPECT_TIMEOUT = 1

  # Wait up to 30 seconds for the password prompt from the raspi
  _PEXPECT_PASSWORD_TIMEOUT_MAX_RETRIES = 30
  # Wait up to 900 seconds for new output from the raspi
  _PEXPECT_READLINE_TIMEOUT_MAX_RETRIES = 900
  # Delay between subsequent SSH commands
  _INTER_COMMAND_DELAY_SECONDS = 0.5

  # This is used to strip ansi color codes from pexpect output.
  _PEXPECT_SANITIZE_LINE_RE = re.compile(r'\x1b[^m]*m')

  def __init__(self, platform, target_name, config, device_id, **kwargs):
    # pylint: disable=super-with-arguments
    super(Launcher, self).__init__(platform, target_name, config, device_id,
                                   **kwargs)
    env = os.environ.copy()
    env.update(self.env_variables)
    self.full_env = env

    if not self.device_id:
      self.device_id = self.full_env.get('RASPI_ADDR')
      if not self.device_id:
        raise ValueError(
            'Unable to determine target, please pass it in, or set RASPI_ADDR '
            'environment variable.')

    self.startup_timeout_seconds = Launcher._STARTUP_TIMEOUT_SECONDS

    self.pexpect_process = None
    self._InitPexpectCommands()

    self.run_inactive = threading.Event()
    self.run_inactive.set()

    self.shutdown_initiated = threading.Event()

    self.log_targets = kwargs.get('log_targets', True)

    signal.signal(signal.SIGINT, functools.partial(_SigIntOrSigTermHandler))
    signal.signal(signal.SIGTERM, functools.partial(_SigIntOrSigTermHandler))

  def _InitPexpectCommands(self):
    """Initializes all of the pexpect commands needed for running the test."""

    # TODO(b/218889313): This should reference the bin/ subdir when that's
    # used.
    test_dir = os.path.join(self.out_directory, 'install', self.target_name)
    # TODO(b/216356058): Delete this conditional that's just for GYP.
    if not os.path.isdir(test_dir):
      test_dir = os.path.join(self.out_directory, 'deploy', self.target_name)
    test_file = self.target_name

    test_path = os.path.join(test_dir, test_file)
    if not os.path.isfile(test_path):
      raise ValueError('TargetPath ({}) must be a file.'.format(test_path))

    raspi_user_hostname = Launcher._RASPI_USERNAME + '@' + self.device_id

    # Use the basename of the out directory as a common directory on the device
    # so content can be reused for several targets w/o re-syncing for each one.
    raspi_test_dir = os.path.basename(self.out_directory)
    raspi_test_path = os.path.join(raspi_test_dir, test_file)

    # rsync command setup
    options = '-avzLhc'
    source = test_dir + '/'
    destination = '{}:~/{}/'.format(raspi_user_hostname, raspi_test_dir)
    self.rsync_command = 'rsync ' + options + ' ' + source + ' ' + destination

    # ssh command setup
    self.ssh_command = 'ssh -t ' + raspi_user_hostname + ' TERM=dumb bash -l'

    # escape command line metacharacters in the flags
    flags = ' '.join(self.target_command_line_params)
    meta_chars = '()[]{}%!^"<>&|'
    meta_re = re.compile('(' + '|'.join(
        re.escape(char) for char in list(meta_chars)) + ')')
    escaped_flags = re.subn(meta_re, r'\\\1', flags)[0]

    # test output tags
    self.test_complete_tag = 'TEST-{time}'.format(time=time.time())
    self.test_success_tag = 'succeeded'
    self.test_failure_tag = 'failed'

    # test command setup
    test_base_command = raspi_test_path + ' ' + escaped_flags
    test_success_output = ' && echo {} {}'.format(self.test_complete_tag,
                                                  self.test_success_tag)
    test_failure_output = ' || echo {} {}'.format(self.test_complete_tag,
                                                  self.test_failure_tag)
    self.test_command = '{} {} {}'.format(test_base_command,
                                          test_success_output,
                                          test_failure_output)

  def _PexpectSpawnAndConnect(self, command):
    """Spawns a process with pexpect and connect to the raspi.

    Args:
       command: The command to use when spawning the pexpect process.
    """

    logging.info('executing: %s', command)
    kwargs = {} if six.PY2 else {'encoding': 'utf-8'}
    self.pexpect_process = pexpect.spawn(
        command, timeout=Launcher._PEXPECT_TIMEOUT, **kwargs)
    # Let pexpect output directly to our output stream
    self.pexpect_process.logfile_read = self.output_file
    retry_count = 0
    expected_prompts = [
        r'.*Are\syou\ssure.*',  # Fingerprint verification
        r'.* password:',  # Password prompt
        '.*[a-zA-Z]+.*',  # Any other text input
    ]
    while True:
      try:
        i = self.pexpect_process.expect(expected_prompts)
        if i == 0:
          self.pexpect_process.sendline('yes')
        elif i == 1:
          self.pexpect_process.sendline(Launcher._RASPI_PASSWORD)
          break
        else:
          # If any other input comes in, maybe we've logged in with rsa key or
          # raspi does not have password. Check if we've logged in by echoing
          # a special sentence and expect it back.
          self.pexpect_process.sendline('echo ' + Launcher._SSH_LOGIN_SIGNAL)
          i = self.pexpect_process.expect([Launcher._SSH_LOGIN_SIGNAL])
          break
      except pexpect.TIMEOUT:
        if self.shutdown_initiated.is_set():
          return
        retry_count += 1
        # Check if the max retry count has been exceeded. If it has, then
        # re-raise the timeout exception.
        if retry_count > Launcher._PEXPECT_PASSWORD_TIMEOUT_MAX_RETRIES:
          raise

  def _PexpectReadLines(self):
    """Reads all lines from the pexpect process."""

    retry_count = 0
    while True:
      try:
        # Sanitize the line to remove ansi color codes.
        line = Launcher._PEXPECT_SANITIZE_LINE_RE.sub(
            '', self.pexpect_process.readline())
        self.output_file.flush()
        if not line:
          break
        # Check for the test complete tag. It will be followed by either a
        # success or failure tag.
        if line.startswith(self.test_complete_tag):
          if line.find(self.test_success_tag) != -1:
            self.return_value = 0
          break
        # A line was successfully read without timing out; reset the retry
        # count before attempting to read the next line.
        retry_count = 0
      except pexpect.TIMEOUT:
        if self.shutdown_initiated.is_set():
          return
        retry_count += 1
        # Check if the max retry count has been exceeded. If it has, then
        # re-raise the timeout exception.
        if retry_count > Launcher._PEXPECT_READLINE_TIMEOUT_MAX_RETRIES:
          raise

  def _Sleep(self, val):
    self.pexpect_process.sendline('sleep {};echo {}'.format(
        val, Launcher._SSH_SLEEP_SIGNAL))
    self.pexpect_process.expect([Launcher._SSH_SLEEP_SIGNAL])

  def _CleanupPexpectProcess(self):
    """Closes current pexpect process."""

    if self.pexpect_process is not None and self.pexpect_process.isalive():
      # Check if kernel logged OOM kill or any other system failure message
      if self.return_value:
        logging.info('Sending dmesg')
        self.pexpect_process.sendline('dmesg -P --color=never | tail -n 100')
        time.sleep(3)
        try:
          self.pexpect_process.readlines()
        except pexpect.TIMEOUT:
          pass
        logging.info('Done sending dmesg')

      # Send ctrl-c to the raspi and close the process.
      self.pexpect_process.sendline(chr(3))
      time.sleep(1)  # Allow a second for normal shutdown
      self.pexpect_process.close()

  def _WaitForPrompt(self):
    """Sends empty commands, until a bash prompt is returned"""
    retry_count = 5
    while True:
      try:
        self.pexpect_process.expect(self._RASPI_PROMPT)
        break
      except pexpect.TIMEOUT:
        if self.shutdown_initiated.is_set():
          return
        retry_count -= 1
        if not retry_count:
          raise
        self.pexpect_process.sendline('echo ' + Launcher._SSH_SLEEP_SIGNAL)
        time.sleep(self._INTER_COMMAND_DELAY_SECONDS)

  def _KillExistingCobaltProcesses(self):
    """If there are leftover Cobalt processes, kill them.

    It is possible that a previous process did not exit cleanly.
    Zombie Cobalt instances can block the WebDriver port or
    cause other problems.
    """
    logging.info('Killing existing processes')
    self.pexpect_process.sendline(
        'pkill -9 -ef "(cobalt)|(crashpad_handler)|(elf_loader)"')
    self._WaitForPrompt()
    # Print the return code of pkill. 0 if a process was halted
    self.pexpect_process.sendline('echo PROCKILL:${?}')
    i = self.pexpect_process.expect([r'PROCKILL:0', r'PROCKILL:(\d+)'])
    if i == 0:
      logging.warning('Forced to pkill existing instance(s) of cobalt. '
                      'Pausing to ensure no further operations are run '
                      'before processes shut down.')
      time.sleep(10)
    logging.info('Done killing existing processes')

  def Run(self):
    """Runs launcher's executable on the target raspi.

    Returns:
       Whether or not the run finished successfully.
    """

    if self.log_targets:
      logging.info('-' * 32)
      logging.info('Starting to run target: %s', self.target_name)
      logging.info('=' * 32)

    self.return_value = 1

    try:
      # Notify other threads that the run is now active
      self.run_inactive.clear()

      # rsync the test files to the raspi
      if not self.shutdown_initiated.is_set():
        self._PexpectSpawnAndConnect(self.rsync_command)
      if not self.shutdown_initiated.is_set():
        self._PexpectReadLines()

      # ssh into the raspi and run the test
      if not self.shutdown_initiated.is_set():
        self._PexpectSpawnAndConnect(self.ssh_command)
        self._Sleep(self._INTER_COMMAND_DELAY_SECONDS)
      # Execute debugging commands on the first run
      if FirstRun():
        for cmd in ['free -mh', 'ps -ux', 'df -h']:
          if not self.shutdown_initiated.is_set():
            self.pexpect_process.sendline(cmd)
            line = self.pexpect_process.readline()
            self.output_file.write(line)
        self._WaitForPrompt()
        self.output_file.flush()
        self._Sleep(self._INTER_COMMAND_DELAY_SECONDS)
        self._KillExistingCobaltProcesses()
        self._Sleep(self._INTER_COMMAND_DELAY_SECONDS)

      if not self.shutdown_initiated.is_set():
        self.pexpect_process.sendline(self.test_command)
        self._PexpectReadLines()

    except pexpect.EOF:
      logging.exception('pexpect encountered EOF while reading line.')
    except pexpect.TIMEOUT:
      logging.exception('pexpect timed out while reading line.')
    except Exception:  # pylint: disable=broad-except
      logging.exception('Error occurred while running test.')
    finally:
      self._CleanupPexpectProcess()

      # Notify other threads that the run is no longer active
      self.run_inactive.set()

    if self.log_targets:
      logging.info('-' * 32)
      logging.info('Finished running target: %s', self.target_name)
      logging.info('=' * 32)

    return self.return_value

  def Kill(self):
    """Stops the run so that the launcher can be killed."""

    sys.stderr.write('\n***Killing Launcher***\n')
    if self.run_inactive.is_set():
      return
    # Initiate the shutdown. This causes the run to abort within one second.
    self.shutdown_initiated.set()
    # Wait up to three seconds for the run to be set to inactive.
    self.run_inactive.wait(3)

  def GetDeviceIp(self):
    """Gets the device IP."""
    return self.device_id

  def GetDeviceOutputPath(self):
    """Writable path where test targets can output files"""
    return '/tmp'