/*
 *  Copyright (c) 2012 The WebM project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */


#include <stdlib.h>
#include "vp8_rtcd.h"
#include "vpx_ports/mem.h"

#if HAVE_DSPR2
#define CROP_WIDTH 256
unsigned char ff_cropTbl[256 + 2 * CROP_WIDTH];

static const unsigned short sub_pel_filterss[8][3] =
{
    {      0,      0,      0},
    {      0, 0x0601, 0x7b0c},
    { 0x0201, 0x0b08, 0x6c24},
    {      0, 0x0906, 0x5d32},
    { 0x0303, 0x1010, 0x4d4d},
    {      0, 0x0609, 0x325d},
    { 0x0102, 0x080b, 0x246c},
    {      0, 0x0106, 0x0c7b},
};


static const int sub_pel_filters_int[8][3] =
{
    {          0,          0,          0},
    { 0x0000fffa, 0x007b000c, 0xffff0000},
    { 0x0002fff5, 0x006c0024, 0xfff80001},
    { 0x0000fff7, 0x005d0032, 0xfffa0000},
    { 0x0003fff0, 0x004d004d, 0xfff00003},
    { 0x0000fffa, 0x0032005d, 0xfff70000},
    { 0x0001fff8, 0x0024006c, 0xfff50002},
    { 0x0000ffff, 0x000c007b, 0xfffa0000},
};


static const int sub_pel_filters_inv[8][3] =
{
    {          0,          0,          0},
    { 0xfffa0000, 0x000c007b, 0x0000ffff},
    { 0xfff50002, 0x0024006c, 0x0001fff8},
    { 0xfff70000, 0x0032005d, 0x0000fffa},
    { 0xfff00003, 0x004d004d, 0x0003fff0},
    { 0xfffa0000, 0x005d0032, 0x0000fff7},
    { 0xfff80001, 0x006c0024, 0x0002fff5},
    { 0xffff0000, 0x007b000c, 0x0000fffa},
};


static const int sub_pel_filters_int_tap_4[8][2] =
{
    {          0,          0},
    { 0xfffa007b, 0x000cffff},
    {          0,          0},
    { 0xfff7005d, 0x0032fffa},
    {          0,          0},
    { 0xfffa0032, 0x005dfff7},
    {          0,          0},
    { 0xffff000c, 0x007bfffa},
};


static const int sub_pel_filters_inv_tap_4[8][2] =
{
    {          0,          0},
    { 0x007bfffa, 0xffff000c},
    {          0,          0},
    { 0x005dfff7, 0xfffa0032},
    {          0,          0},
    { 0x0032fffa, 0xfff7005d},
    {          0,          0},
    { 0x000cffff, 0xfffa007b},
};

inline void prefetch_load(unsigned char *src)
{
    __asm__ __volatile__ (
        "pref   0,  0(%[src])   \n\t"
        :
        : [src] "r" (src)
    );
}


inline void prefetch_store(unsigned char *dst)
{
    __asm__ __volatile__ (
        "pref   1,  0(%[dst])   \n\t"
        :
        : [dst] "r" (dst)
    );
}

void dsputil_static_init(void)
{
    int i;

    for (i = 0; i < 256; i++) ff_cropTbl[i + CROP_WIDTH] = i;

    for (i = 0; i < CROP_WIDTH; i++)
    {
        ff_cropTbl[i] = 0;
        ff_cropTbl[i + CROP_WIDTH + 256] = 255;
    }
}

void vp8_filter_block2d_first_pass_4
(
    unsigned char *RESTRICT src_ptr,
    unsigned char *RESTRICT dst_ptr,
    unsigned int src_pixels_per_line,
    unsigned int output_height,
    int xoffset,
    int pitch
)
{
    unsigned int i;
    int Temp1, Temp2, Temp3, Temp4;

    unsigned int vector4a = 64;
    int vector1b, vector2b, vector3b;
    unsigned int tp1, tp2, tn1, tn2;
    unsigned int p1, p2, p3;
    unsigned int n1, n2, n3;
    unsigned char *cm = ff_cropTbl + CROP_WIDTH;

    vector3b = sub_pel_filters_inv[xoffset][2];

    /* if (xoffset == 0) we don't need any filtering */
    if (vector3b == 0)
    {
        for (i = 0; i < output_height; i++)
        {
            /* prefetch src_ptr data to cache memory */
            prefetch_load(src_ptr + src_pixels_per_line);
            dst_ptr[0] = src_ptr[0];
            dst_ptr[1] = src_ptr[1];
            dst_ptr[2] = src_ptr[2];
            dst_ptr[3] = src_ptr[3];

            /* next row... */
            src_ptr += src_pixels_per_line;
            dst_ptr += 4;
        }
    }
    else
    {
        if (vector3b > 65536)
        {
            /* 6 tap filter */

            vector1b = sub_pel_filters_inv[xoffset][0];
            vector2b = sub_pel_filters_inv[xoffset][1];

            /* prefetch src_ptr data to cache memory */
            prefetch_load(src_ptr + src_pixels_per_line);

            for (i = output_height; i--;)
            {
                /* apply filter with vectors pairs */
                __asm__ __volatile__ (
                    "ulw              %[tp1],      -2(%[src_ptr])                 \n\t"
                    "ulw              %[tp2],      2(%[src_ptr])                  \n\t"

                    /* even 1. pixel */
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[p1],       %[tp1]                         \n\t"
                    "preceu.ph.qbl    %[p2],       %[tp1]                         \n\t"
                    "preceu.ph.qbr    %[p3],       %[tp2]                         \n\t"
                    "dpa.w.ph         $ac3,        %[p1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p2],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p3],          %[vector3b]    \n\t"

                    /* even 2. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbl    %[p1],       %[tp2]                         \n\t"
                    "balign           %[tp2],      %[tp1],         3              \n\t"
                    "extp             %[Temp1],    $ac3,           9              \n\t"
                    "dpa.w.ph         $ac2,        %[p2],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p3],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p1],          %[vector3b]    \n\t"

                    /* odd 1. pixel */
                    "ulw              %[tn2],      3(%[src_ptr])                  \n\t"
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[n1],       %[tp2]                         \n\t"
                    "preceu.ph.qbl    %[n2],       %[tp2]                         \n\t"
                    "preceu.ph.qbr    %[n3],       %[tn2]                         \n\t"
                    "extp             %[Temp3],    $ac2,           9              \n\t"
                    "dpa.w.ph         $ac3,        %[n1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n2],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n3],          %[vector3b]    \n\t"

                    /* even 2. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbl    %[n1],       %[tn2]                         \n\t"
                    "extp             %[Temp2],    $ac3,           9              \n\t"
                    "dpa.w.ph         $ac2,        %[n2],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n3],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n1],          %[vector3b]    \n\t"
                    "extp             %[Temp4],    $ac2,           9              \n\t"

                    /* clamp */
                    "lbux             %[tp1],      %[Temp1](%[cm])                \n\t"
                    "lbux             %[tn1],      %[Temp2](%[cm])                \n\t"
                    "lbux             %[tp2],      %[Temp3](%[cm])                \n\t"
                    "lbux             %[n2],       %[Temp4](%[cm])                \n\t"

                    /* store bytes */
                    "sb               %[tp1],      0(%[dst_ptr])                  \n\t"
                    "sb               %[tn1],      1(%[dst_ptr])                  \n\t"
                    "sb               %[tp2],      2(%[dst_ptr])                  \n\t"
                    "sb               %[n2],       3(%[dst_ptr])                  \n\t"

                    : [tp1] "=&r" (tp1), [tp2] "=&r" (tp2), [tn1] "=&r" (tn1),
                      [tn2] "=&r" (tn2), [p1] "=&r" (p1), [p2] "=&r" (p2),
                      [p3] "=&r" (p3), [n1] "=&r" (n1), [n2] "=&r" (n2),
                      [n3] "=&r" (n3), [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                      [Temp3] "=&r" (Temp3), [Temp4] "=&r" (Temp4)
                    : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                      [vector4a] "r" (vector4a), [cm] "r" (cm), [dst_ptr] "r" (dst_ptr),
                      [vector3b] "r" (vector3b), [src_ptr] "r" (src_ptr)
                );

                /* Next row... */
                src_ptr += src_pixels_per_line;
                dst_ptr += pitch;
            }
        }
        else
        {
            /* 4 tap filter */

            vector1b = sub_pel_filters_inv_tap_4[xoffset][0];
            vector2b = sub_pel_filters_inv_tap_4[xoffset][1];

            for (i = output_height; i--;)
            {
                /* apply filter with vectors pairs */
                __asm__ __volatile__ (
                    "ulw              %[tp1],      -1(%[src_ptr])                 \n\t"
                    "ulw              %[tp2],      3(%[src_ptr])                  \n\t"

                    /* even 1. pixel */
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[p1],       %[tp1]                         \n\t"
                    "preceu.ph.qbl    %[p2],       %[tp1]                         \n\t"
                    "preceu.ph.qbr    %[p3],       %[tp2]                         \n\t"
                    "dpa.w.ph         $ac3,        %[p1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p2],          %[vector2b]    \n\t"

                    /* even 2. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "dpa.w.ph         $ac2,        %[p2],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p3],          %[vector2b]    \n\t"
                    "extp             %[Temp1],    $ac3,           9              \n\t"

                    /* odd 1. pixel */
                    "srl              %[tn1],      %[tp2],         8              \n\t"
                    "balign           %[tp2],      %[tp1],         3              \n\t"
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[n1],       %[tp2]                         \n\t"
                    "preceu.ph.qbl    %[n2],       %[tp2]                         \n\t"
                    "preceu.ph.qbr    %[n3],       %[tn1]                         \n\t"
                    "extp             %[Temp3],    $ac2,           9              \n\t"
                    "dpa.w.ph         $ac3,        %[n1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n2],          %[vector2b]    \n\t"

                    /* odd 2. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "extp             %[Temp2],    $ac3,           9              \n\t"
                    "dpa.w.ph         $ac2,        %[n2],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n3],          %[vector2b]    \n\t"
                    "extp             %[Temp4],    $ac2,           9              \n\t"

                    /* clamp and store results */
                    "lbux             %[tp1],      %[Temp1](%[cm])                \n\t"
                    "lbux             %[tn1],      %[Temp2](%[cm])                \n\t"
                    "lbux             %[tp2],      %[Temp3](%[cm])                \n\t"
                    "sb               %[tp1],      0(%[dst_ptr])                  \n\t"
                    "sb               %[tn1],      1(%[dst_ptr])                  \n\t"
                    "lbux             %[n2],       %[Temp4](%[cm])                \n\t"
                    "sb               %[tp2],      2(%[dst_ptr])                  \n\t"
                    "sb               %[n2],       3(%[dst_ptr])                  \n\t"

                    : [tp1] "=&r" (tp1), [tp2] "=&r" (tp2), [tn1] "=&r" (tn1),
                      [p1] "=&r" (p1), [p2] "=&r" (p2), [p3] "=&r" (p3),
                      [n1] "=&r" (n1), [n2] "=&r" (n2), [n3] "=&r" (n3),
                      [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                      [Temp3] "=&r" (Temp3), [Temp4] "=&r" (Temp4)
                    : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                      [vector4a] "r" (vector4a), [cm] "r" (cm), [dst_ptr] "r" (dst_ptr),
                      [src_ptr] "r" (src_ptr)
                );
                /*  Next row... */
                src_ptr += src_pixels_per_line;
                dst_ptr += pitch;
            }
        }
    }
}

void vp8_filter_block2d_first_pass_8_all
(
    unsigned char *RESTRICT src_ptr,
    unsigned char *RESTRICT dst_ptr,
    unsigned int src_pixels_per_line,
    unsigned int output_height,
    int xoffset,
    int pitch
)
{
    unsigned int i;
    int Temp1, Temp2, Temp3, Temp4;

    unsigned int vector4a = 64;
    unsigned int vector1b, vector2b, vector3b;
    unsigned int tp1, tp2, tn1, tn2;
    unsigned int p1, p2, p3, p4;
    unsigned int n1, n2, n3, n4;

    unsigned char *cm = ff_cropTbl + CROP_WIDTH;

    /* if (xoffset == 0) we don't need any filtering */
    if (xoffset == 0)
    {
        for (i = 0; i < output_height; i++)
        {
            /* prefetch src_ptr data to cache memory */
            prefetch_load(src_ptr + src_pixels_per_line);

            dst_ptr[0] = src_ptr[0];
            dst_ptr[1] = src_ptr[1];
            dst_ptr[2] = src_ptr[2];
            dst_ptr[3] = src_ptr[3];
            dst_ptr[4] = src_ptr[4];
            dst_ptr[5] = src_ptr[5];
            dst_ptr[6] = src_ptr[6];
            dst_ptr[7] = src_ptr[7];

            /* next row... */
            src_ptr += src_pixels_per_line;
            dst_ptr += 8;
        }
    }
    else
    {
        vector3b = sub_pel_filters_inv[xoffset][2];

        if (vector3b > 65536)
        {
            /* 6 tap filter */

            vector1b = sub_pel_filters_inv[xoffset][0];
            vector2b = sub_pel_filters_inv[xoffset][1];

            for (i = output_height; i--;)
            {
                /* prefetch src_ptr data to cache memory */
                prefetch_load(src_ptr + src_pixels_per_line);

                /* apply filter with vectors pairs */
                __asm__ __volatile__ (
                    "ulw              %[tp1],      -2(%[src_ptr])                 \n\t"
                    "ulw              %[tp2],      2(%[src_ptr])                  \n\t"

                    /* even 1. pixel */
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[p1],       %[tp1]                         \n\t"
                    "preceu.ph.qbl    %[p2],       %[tp1]                         \n\t"
                    "preceu.ph.qbr    %[p3],       %[tp2]                         \n\t"
                    "dpa.w.ph         $ac3,        %[p1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p2],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p3],          %[vector3b]    \n\t"

                    /* even 2. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbl    %[p1],       %[tp2]                         \n\t"
                    "dpa.w.ph         $ac2,        %[p2],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p3],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p1],          %[vector3b]    \n\t"

                    "balign           %[tp2],      %[tp1],         3              \n\t"
                    "extp             %[Temp1],    $ac3,           9              \n\t"
                    "ulw              %[tn2],      3(%[src_ptr])                  \n\t"

                    /* odd 1. pixel */
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[n1],       %[tp2]                         \n\t"
                    "preceu.ph.qbl    %[n2],       %[tp2]                         \n\t"
                    "preceu.ph.qbr    %[n3],       %[tn2]                         \n\t"
                    "extp             %[Temp3],    $ac2,           9              \n\t"
                    "dpa.w.ph         $ac3,        %[n1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n2],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n3],          %[vector3b]    \n\t"

                    /* odd 2. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbl    %[n1],       %[tn2]                         \n\t"
                    "dpa.w.ph         $ac2,        %[n2],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n3],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n1],          %[vector3b]    \n\t"
                    "ulw              %[tp1],      6(%[src_ptr])                  \n\t"
                    "extp             %[Temp2],    $ac3,           9              \n\t"
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[p2],       %[tp1]                         \n\t"
                    "extp             %[Temp4],    $ac2,           9              \n\t"

                    : [tp1] "=&r" (tp1), [tp2] "=&r" (tp2), [tn2] "=&r" (tn2),
                      [p1] "=&r" (p1), [p2] "=&r" (p2), [p3] "=&r" (p3),
                      [n1] "=&r" (n1), [n2] "=&r" (n2), [n3] "=&r" (n3),
                      [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                      [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4)
                    : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                      [vector4a] "r" (vector4a), [vector3b] "r" (vector3b),
                      [src_ptr] "r" (src_ptr)
                );

                /* clamp and store results */
                dst_ptr[0] = cm[Temp1];
                dst_ptr[1] = cm[Temp2];
                dst_ptr[2] = cm[Temp3];
                dst_ptr[3] = cm[Temp4];

                /* next 4 pixels */
                __asm__ __volatile__ (
                    /* even 3. pixel */
                    "dpa.w.ph         $ac3,        %[p3],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p1],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p2],          %[vector3b]    \n\t"

                    /* even 4. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbl    %[p4],       %[tp1]                         \n\t"
                    "dpa.w.ph         $ac2,        %[p1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p2],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p4],          %[vector3b]    \n\t"

                    "ulw              %[tn1],      7(%[src_ptr])                  \n\t"
                    "extp             %[Temp1],    $ac3,           9              \n\t"

                    /* odd 3. pixel */
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[n2],       %[tn1]                         \n\t"
                    "dpa.w.ph         $ac3,        %[n3],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n1],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n2],          %[vector3b]    \n\t"
                    "extp             %[Temp3],    $ac2,           9              \n\t"

                    /* odd 4. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbl    %[n4],       %[tn1]                         \n\t"
                    "dpa.w.ph         $ac2,        %[n1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n2],          %[vector2b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n4],          %[vector3b]    \n\t"
                    "extp             %[Temp2],    $ac3,           9              \n\t"
                    "extp             %[Temp4],    $ac2,           9              \n\t"

                    : [tn1] "=&r" (tn1), [n2] "=&r" (n2),
                      [p4] "=&r" (p4), [n4] "=&r" (n4),
                      [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                      [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4)
                    : [tp1] "r" (tp1), [vector1b] "r" (vector1b), [p2] "r" (p2),
                      [vector2b] "r" (vector2b), [n1] "r" (n1), [p1] "r" (p1),
                      [vector4a] "r" (vector4a), [vector3b] "r" (vector3b),
                      [p3] "r" (p3), [n3] "r" (n3), [src_ptr] "r" (src_ptr)
                );

                /* clamp and store results */
                dst_ptr[4] = cm[Temp1];
                dst_ptr[5] = cm[Temp2];
                dst_ptr[6] = cm[Temp3];
                dst_ptr[7] = cm[Temp4];

                src_ptr += src_pixels_per_line;
                dst_ptr += pitch;
            }
        }
        else
        {
            /* 4 tap filter */

            vector1b = sub_pel_filters_inv_tap_4[xoffset][0];
            vector2b = sub_pel_filters_inv_tap_4[xoffset][1];

            for (i = output_height; i--;)
            {
                /* prefetch src_ptr data to cache memory */
                prefetch_load(src_ptr + src_pixels_per_line);

                /* apply filter with vectors pairs */
                __asm__ __volatile__ (
                    "ulw              %[tp1],      -1(%[src_ptr])                 \n\t"

                    /* even 1. pixel */
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[p1],       %[tp1]                         \n\t"
                    "preceu.ph.qbl    %[p2],       %[tp1]                         \n\t"
                    "dpa.w.ph         $ac3,        %[p1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p2],          %[vector2b]    \n\t"

                    "ulw              %[tp2],      3(%[src_ptr])                  \n\t"

                    /* even 2. pixel  */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbr    %[p3],       %[tp2]                         \n\t"
                    "preceu.ph.qbl    %[p4],       %[tp2]                         \n\t"
                    "dpa.w.ph         $ac2,        %[p2],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p3],          %[vector2b]    \n\t"
                    "extp             %[Temp1],    $ac3,           9              \n\t"

                    "balign           %[tp2],      %[tp1],         3              \n\t"

                    /* odd 1. pixel */
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "preceu.ph.qbr    %[n1],       %[tp2]                         \n\t"
                    "preceu.ph.qbl    %[n2],       %[tp2]                         \n\t"
                    "dpa.w.ph         $ac3,        %[n1],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n2],          %[vector2b]    \n\t"
                    "extp             %[Temp3],    $ac2,           9              \n\t"

                    "ulw              %[tn2],      4(%[src_ptr])                  \n\t"

                    /* odd 2. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbr    %[n3],       %[tn2]                         \n\t"
                    "preceu.ph.qbl    %[n4],       %[tn2]                         \n\t"
                    "dpa.w.ph         $ac2,        %[n2],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n3],          %[vector2b]    \n\t"
                    "ulw              %[tp1],      7(%[src_ptr])                  \n\t"
                    "extp             %[Temp2],    $ac3,           9              \n\t"
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "extp             %[Temp4],    $ac2,           9              \n\t"

                    : [tp1] "=&r" (tp1), [tp2] "=&r" (tp2),
                      [tn2] "=&r" (tn2), [p1] "=&r" (p1), [p2] "=&r" (p2),
                      [p3] "=&r" (p3), [p4] "=&r" (p4), [n1] "=&r" (n1),
                      [n2] "=&r" (n2), [n3] "=&r" (n3), [n4] "=&r" (n4),
                      [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                      [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4)
                    : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                      [vector4a] "r" (vector4a), [src_ptr] "r" (src_ptr)
                );

                /* clamp and store results */
                dst_ptr[0] = cm[Temp1];
                dst_ptr[1] = cm[Temp2];
                dst_ptr[2] = cm[Temp3];
                dst_ptr[3] = cm[Temp4];

                /* next 4 pixels */
                __asm__ __volatile__ (
                    /* even 3. pixel */
                    "dpa.w.ph         $ac3,        %[p3],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[p4],          %[vector2b]    \n\t"

                    /* even 4. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbr    %[p2],       %[tp1]                         \n\t"
                    "dpa.w.ph         $ac2,        %[p4],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[p2],          %[vector2b]    \n\t"
                    "extp             %[Temp1],    $ac3,           9              \n\t"

                    /* odd 3. pixel */
                    "mtlo             %[vector4a], $ac3                           \n\t"
                    "dpa.w.ph         $ac3,        %[n3],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac3,        %[n4],          %[vector2b]    \n\t"
                    "ulw              %[tn1],      8(%[src_ptr])                  \n\t"
                    "extp             %[Temp3],    $ac2,           9              \n\t"

                    /* odd 4. pixel */
                    "mtlo             %[vector4a], $ac2                           \n\t"
                    "preceu.ph.qbr    %[n2],       %[tn1]                         \n\t"
                    "dpa.w.ph         $ac2,        %[n4],          %[vector1b]    \n\t"
                    "dpa.w.ph         $ac2,        %[n2],          %[vector2b]    \n\t"
                    "extp             %[Temp2],    $ac3,           9              \n\t"
                    "extp             %[Temp4],    $ac2,           9              \n\t"

                    : [tn1] "=&r" (tn1), [p2] "=&r" (p2), [n2] "=&r" (n2),
                      [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                      [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4)
                    : [tp1] "r" (tp1), [p3] "r" (p3), [p4] "r" (p4),
                      [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                      [vector4a] "r" (vector4a), [src_ptr] "r" (src_ptr),
                      [n3] "r" (n3), [n4] "r" (n4)
                );

                /* clamp and store results */
                dst_ptr[4] = cm[Temp1];
                dst_ptr[5] = cm[Temp2];
                dst_ptr[6] = cm[Temp3];
                dst_ptr[7] = cm[Temp4];

                /* next row... */
                src_ptr += src_pixels_per_line;
                dst_ptr += pitch;
            }
        }
    }
}


void vp8_filter_block2d_first_pass16_6tap
(
    unsigned char *RESTRICT src_ptr,
    unsigned char *RESTRICT dst_ptr,
    unsigned int src_pixels_per_line,
    unsigned int output_height,
    int xoffset,
    int pitch
)
{
    unsigned int i;
    int Temp1, Temp2, Temp3, Temp4;

    unsigned int vector4a;
    unsigned int vector1b, vector2b, vector3b;
    unsigned int tp1, tp2, tn1, tn2;
    unsigned int p1, p2, p3, p4;
    unsigned int n1, n2, n3, n4;
    unsigned char *cm = ff_cropTbl + CROP_WIDTH;

    vector1b = sub_pel_filters_inv[xoffset][0];
    vector2b = sub_pel_filters_inv[xoffset][1];
    vector3b = sub_pel_filters_inv[xoffset][2];
    vector4a = 64;

    for (i = output_height; i--;)
    {
        /* prefetch src_ptr data to cache memory */
        prefetch_load(src_ptr + src_pixels_per_line);

        /* apply filter with vectors pairs */
        __asm__ __volatile__ (
            "ulw                %[tp1],      -2(%[src_ptr])                 \n\t"
            "ulw                %[tp2],      2(%[src_ptr])                  \n\t"

            /* even 1. pixel */
            "mtlo               %[vector4a], $ac3                           \n\t"
            "preceu.ph.qbr      %[p1],       %[tp1]                         \n\t"
            "preceu.ph.qbl      %[p2],       %[tp1]                         \n\t"
            "preceu.ph.qbr      %[p3],       %[tp2]                         \n\t"
            "dpa.w.ph           $ac3,        %[p1],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac3,        %[p2],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac3,        %[p3],           %[vector3b]   \n\t"

            /* even 2. pixel */
            "mtlo               %[vector4a], $ac2                           \n\t"
            "preceu.ph.qbl      %[p1],       %[tp2]                         \n\t"
            "dpa.w.ph           $ac2,        %[p2],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac2,        %[p3],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac2,        %[p1],           %[vector3b]   \n\t"

            "balign             %[tp2],      %[tp1],          3             \n\t"
            "ulw                %[tn2],      3(%[src_ptr])                  \n\t"
            "extp               %[Temp1],    $ac3,            9             \n\t"

            /* odd 1. pixel */
            "mtlo               %[vector4a], $ac3                           \n\t"
            "preceu.ph.qbr      %[n1],       %[tp2]                         \n\t"
            "preceu.ph.qbl      %[n2],       %[tp2]                         \n\t"
            "preceu.ph.qbr      %[n3],       %[tn2]                         \n\t"
            "extp               %[Temp3],    $ac2,            9             \n\t"
            "dpa.w.ph           $ac3,        %[n1],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac3,        %[n2],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac3,        %[n3],           %[vector3b]   \n\t"

            /* odd 2. pixel */
            "mtlo               %[vector4a], $ac2                           \n\t"
            "preceu.ph.qbl      %[n1],       %[tn2]                         \n\t"
            "dpa.w.ph           $ac2,        %[n2],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac2,        %[n3],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac2,        %[n1],           %[vector3b]   \n\t"
            "ulw                %[tp1],      6(%[src_ptr])                  \n\t"
            "extp               %[Temp2],    $ac3,            9             \n\t"
            "mtlo               %[vector4a], $ac3                           \n\t"
            "preceu.ph.qbr      %[p2],       %[tp1]                         \n\t"
            "extp               %[Temp4],    $ac2,            9             \n\t"

            : [tp1] "=&r" (tp1), [tp2] "=&r" (tp2), [tn2] "=&r" (tn2),
              [p1] "=&r" (p1), [p2] "=&r" (p2), [p3] "=&r" (p3),
              [n1] "=&r" (n1), [n2] "=&r" (n2), [n3] "=&r" (n3),
              [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
              [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4)
            : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
              [vector4a] "r" (vector4a), [vector3b] "r" (vector3b),
              [src_ptr] "r" (src_ptr)
        );

        /* clamp and store results */
        dst_ptr[0] = cm[Temp1];
        dst_ptr[1] = cm[Temp2];
        dst_ptr[2] = cm[Temp3];
        dst_ptr[3] = cm[Temp4];

        /* next 4 pixels */
        __asm__ __volatile__ (
            /* even 3. pixel */
            "dpa.w.ph           $ac3,        %[p3],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac3,        %[p1],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac3,        %[p2],           %[vector3b]   \n\t"

            /* even 4. pixel */
            "mtlo               %[vector4a], $ac2                           \n\t"
            "preceu.ph.qbl      %[p4],       %[tp1]                         \n\t"
            "dpa.w.ph           $ac2,        %[p1],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac2,        %[p2],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac2,        %[p4],           %[vector3b]   \n\t"
            "ulw                %[tn1],      7(%[src_ptr])                  \n\t"
            "extp               %[Temp1],    $ac3,            9             \n\t"

            /* odd 3. pixel */
            "mtlo               %[vector4a], $ac3                           \n\t"
            "preceu.ph.qbr      %[n2],       %[tn1]                         \n\t"
            "dpa.w.ph           $ac3,        %[n3],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac3,        %[n1],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac3,        %[n2],           %[vector3b]   \n\t"
            "extp               %[Temp3],    $ac2,            9             \n\t"

            /* odd 4. pixel */
            "mtlo               %[vector4a], $ac2                           \n\t"
            "preceu.ph.qbl      %[n4],       %[tn1]                         \n\t"
            "dpa.w.ph           $ac2,        %[n1],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac2,        %[n2],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac2,        %[n4],           %[vector3b]   \n\t"
            "ulw                %[tp2],      10(%[src_ptr])                 \n\t"
            "extp               %[Temp2],    $ac3,            9             \n\t"
            "mtlo               %[vector4a], $ac3                           \n\t"
            "preceu.ph.qbr      %[p1],       %[tp2]                         \n\t"
            "extp               %[Temp4],    $ac2,            9             \n\t"

            : [tn1] "=&r" (tn1), [tp2] "=&r" (tp2), [n2] "=&r" (n2),
              [p4] "=&r" (p4), [n4] "=&r" (n4),
              [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
              [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4)
            : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
              [tp1] "r" (tp1), [n1] "r" (n1), [p1] "r" (p1),
              [vector4a] "r" (vector4a), [p2] "r" (p2), [vector3b] "r" (vector3b),
              [p3] "r" (p3), [n3] "r" (n3), [src_ptr] "r" (src_ptr)
        );

        /* clamp and store results */
        dst_ptr[4] = cm[Temp1];
        dst_ptr[5] = cm[Temp2];
        dst_ptr[6] = cm[Temp3];
        dst_ptr[7] = cm[Temp4];

        /* next 4 pixels */
        __asm__ __volatile__ (
            /* even 5. pixel */
            "dpa.w.ph           $ac3,        %[p2],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac3,        %[p4],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac3,        %[p1],           %[vector3b]   \n\t"

            /* even 6. pixel */
            "mtlo               %[vector4a], $ac2                           \n\t"
            "preceu.ph.qbl      %[p3],       %[tp2]                         \n\t"
            "dpa.w.ph           $ac2,        %[p4],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac2,        %[p1],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac2,        %[p3],           %[vector3b]   \n\t"

            "ulw                %[tn1],      11(%[src_ptr])                 \n\t"
            "extp               %[Temp1],    $ac3,            9             \n\t"

            /* odd 5. pixel */
            "mtlo               %[vector4a], $ac3                           \n\t"
            "preceu.ph.qbr      %[n1],       %[tn1]                         \n\t"
            "dpa.w.ph           $ac3,        %[n2],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac3,        %[n4],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac3,        %[n1],           %[vector3b]   \n\t"
            "extp               %[Temp3],    $ac2,            9             \n\t"

            /* odd 6. pixel */
            "mtlo               %[vector4a], $ac2                           \n\t"
            "preceu.ph.qbl      %[n3],       %[tn1]                         \n\t"
            "dpa.w.ph           $ac2,        %[n4],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac2,        %[n1],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac2,        %[n3],           %[vector3b]   \n\t"
            "ulw                %[tp1],      14(%[src_ptr])                 \n\t"
            "extp               %[Temp2],    $ac3,            9             \n\t"
            "mtlo               %[vector4a], $ac3                           \n\t"
            "preceu.ph.qbr      %[p4],       %[tp1]                         \n\t"
            "extp               %[Temp4],    $ac2,            9             \n\t"

            : [tn1] "=&r" (tn1), [tp1] "=&r" (tp1),
              [n1] "=&r" (n1), [p3] "=&r" (p3), [n3] "=&r" (n3),
              [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
              [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4)
            : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
              [tp2] "r" (tp2), [p2] "r" (p2), [n2] "r" (n2),
              [p4] "r" (p4), [n4] "r" (n4), [p1] "r" (p1), [src_ptr] "r" (src_ptr),
              [vector4a] "r" (vector4a), [vector3b] "r" (vector3b)
        );

        /* clamp and store results */
        dst_ptr[8] = cm[Temp1];
        dst_ptr[9] = cm[Temp2];
        dst_ptr[10] = cm[Temp3];
        dst_ptr[11] = cm[Temp4];

        /* next 4 pixels */
        __asm__ __volatile__ (
            /* even 7. pixel */
            "dpa.w.ph           $ac3,        %[p1],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac3,        %[p3],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac3,        %[p4],           %[vector3b]   \n\t"

            /* even 8. pixel */
            "mtlo               %[vector4a], $ac2                           \n\t"
            "preceu.ph.qbl      %[p2],       %[tp1]                         \n\t"
            "dpa.w.ph           $ac2,        %[p3],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac2,        %[p4],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac2,        %[p2],           %[vector3b]   \n\t"
            "ulw                %[tn1],      15(%[src_ptr])                 \n\t"
            "extp               %[Temp1],    $ac3,            9             \n\t"

            /* odd 7. pixel */
            "mtlo               %[vector4a], $ac3                           \n\t"
            "preceu.ph.qbr      %[n4],       %[tn1]                         \n\t"
            "dpa.w.ph           $ac3,        %[n1],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac3,        %[n3],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac3,        %[n4],           %[vector3b]   \n\t"
            "extp               %[Temp3],    $ac2,            9             \n\t"

            /* odd 8. pixel */
            "mtlo               %[vector4a], $ac2                           \n\t"
            "preceu.ph.qbl      %[n2],       %[tn1]                         \n\t"
            "dpa.w.ph           $ac2,        %[n3],           %[vector1b]   \n\t"
            "dpa.w.ph           $ac2,        %[n4],           %[vector2b]   \n\t"
            "dpa.w.ph           $ac2,        %[n2],           %[vector3b]   \n\t"
            "extp               %[Temp2],    $ac3,            9             \n\t"
            "extp               %[Temp4],    $ac2,            9             \n\t"

            /* clamp and store results */
            "lbux               %[tp1],      %[Temp1](%[cm])                \n\t"
            "lbux               %[tn1],      %[Temp2](%[cm])                \n\t"
            "lbux               %[p2],       %[Temp3](%[cm])                \n\t"
            "sb                 %[tp1],      12(%[dst_ptr])                 \n\t"
            "sb                 %[tn1],      13(%[dst_ptr])                 \n\t"
            "lbux               %[n2],       %[Temp4](%[cm])                \n\t"
            "sb                 %[p2],       14(%[dst_ptr])                 \n\t"
            "sb                 %[n2],       15(%[dst_ptr])                 \n\t"

            : [tn1] "=&r" (tn1), [p2] "=&r" (p2), [n2] "=&r" (n2), [n4] "=&r" (n4),
              [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
              [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4)
            : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
              [tp1] "r" (tp1), [p4] "r" (p4), [n1] "r" (n1), [p1] "r" (p1),
              [vector4a] "r" (vector4a), [vector3b] "r" (vector3b), [p3] "r" (p3),
              [n3] "r" (n3), [src_ptr] "r" (src_ptr),
              [cm] "r" (cm), [dst_ptr] "r" (dst_ptr)
        );

        src_ptr += src_pixels_per_line;
        dst_ptr += pitch;
    }
}


void vp8_filter_block2d_first_pass16_0
(
    unsigned char *RESTRICT src_ptr,
    unsigned char *RESTRICT output_ptr,
    unsigned int src_pixels_per_line
)
{
    int Temp1, Temp2, Temp3, Temp4;
    int i;

    /* prefetch src_ptr data to cache memory */
    prefetch_store(output_ptr + 32);

    /* copy memory from src buffer to dst buffer */
    for (i = 0; i < 7; i++)
    {
        __asm__ __volatile__ (
            "ulw    %[Temp1],   0(%[src_ptr])                               \n\t"
            "ulw    %[Temp2],   4(%[src_ptr])                               \n\t"
            "ulw    %[Temp3],   8(%[src_ptr])                               \n\t"
            "ulw    %[Temp4],   12(%[src_ptr])                              \n\t"
            "sw     %[Temp1],   0(%[output_ptr])                            \n\t"
            "sw     %[Temp2],   4(%[output_ptr])                            \n\t"
            "sw     %[Temp3],   8(%[output_ptr])                            \n\t"
            "sw     %[Temp4],   12(%[output_ptr])                           \n\t"
            "addu   %[src_ptr], %[src_ptr],        %[src_pixels_per_line]   \n\t"

            : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2), [Temp3] "=&r" (Temp3),
              [Temp4] "=&r" (Temp4), [src_ptr] "+r" (src_ptr)
            : [src_pixels_per_line] "r" (src_pixels_per_line),
              [output_ptr] "r" (output_ptr)
        );

        __asm__ __volatile__ (
            "ulw    %[Temp1],   0(%[src_ptr])                               \n\t"
            "ulw    %[Temp2],   4(%[src_ptr])                               \n\t"
            "ulw    %[Temp3],   8(%[src_ptr])                               \n\t"
            "ulw    %[Temp4],   12(%[src_ptr])                              \n\t"
            "sw     %[Temp1],   16(%[output_ptr])                           \n\t"
            "sw     %[Temp2],   20(%[output_ptr])                           \n\t"
            "sw     %[Temp3],   24(%[output_ptr])                           \n\t"
            "sw     %[Temp4],   28(%[output_ptr])                           \n\t"
            "addu   %[src_ptr], %[src_ptr],        %[src_pixels_per_line]   \n\t"

            : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2), [Temp3] "=&r" (Temp3),
              [Temp4] "=&r" (Temp4), [src_ptr] "+r" (src_ptr)
            : [src_pixels_per_line] "r" (src_pixels_per_line),
              [output_ptr] "r" (output_ptr)
        );

        __asm__ __volatile__ (
            "ulw    %[Temp1],   0(%[src_ptr])                               \n\t"
            "ulw    %[Temp2],   4(%[src_ptr])                               \n\t"
            "ulw    %[Temp3],   8(%[src_ptr])                               \n\t"
            "ulw    %[Temp4],   12(%[src_ptr])                              \n\t"
            "sw     %[Temp1],   32(%[output_ptr])                           \n\t"
            "sw     %[Temp2],   36(%[output_ptr])                           \n\t"
            "sw     %[Temp3],   40(%[output_ptr])                           \n\t"
            "sw     %[Temp4],   44(%[output_ptr])                           \n\t"
            "addu   %[src_ptr], %[src_ptr],        %[src_pixels_per_line]   \n\t"

            : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2), [Temp3] "=&r" (Temp3),
              [Temp4] "=&r" (Temp4), [src_ptr] "+r" (src_ptr)
            : [src_pixels_per_line] "r" (src_pixels_per_line),
              [output_ptr] "r" (output_ptr)
        );

        output_ptr += 48;
    }
}


void vp8_filter_block2d_first_pass16_4tap
(
    unsigned char *RESTRICT src_ptr,
    unsigned char *RESTRICT output_ptr,
    unsigned int src_pixels_per_line,
    unsigned int output_width,
    unsigned int output_height,
    int xoffset,
    int yoffset,
    unsigned char *RESTRICT dst_ptr,
    int pitch
)
{
    unsigned int i, j;
    int Temp1, Temp2, Temp3, Temp4;

    unsigned int vector4a;
    int vector1b, vector2b;
    unsigned int tp1, tp2, tp3, tn1;
    unsigned int p1, p2, p3;
    unsigned int n1, n2, n3;
    unsigned char *cm = ff_cropTbl + CROP_WIDTH;

    vector4a = 64;

    vector1b = sub_pel_filters_inv_tap_4[xoffset][0];
    vector2b = sub_pel_filters_inv_tap_4[xoffset][1];

    /* if (yoffset == 0) don't need temp buffer, data will be stored in dst_ptr */
    if (yoffset == 0)
    {
        output_height -= 5;
        src_ptr += (src_pixels_per_line + src_pixels_per_line);

        for (i = output_height; i--;)
        {
            __asm__ __volatile__ (
                "ulw     %[tp3],   -1(%[src_ptr])               \n\t"
                : [tp3] "=&r" (tp3)
                : [src_ptr] "r" (src_ptr)
            );

            /* processing 4 adjacent pixels */
            for (j = 0; j < 16; j += 4)
            {
                /* apply filter with vectors pairs */
                __asm__ __volatile__ (
                    "ulw              %[tp2],      3(%[src_ptr])                    \n\t"
                    "move             %[tp1],      %[tp3]                           \n\t"

                    /* even 1. pixel */
                    "mtlo             %[vector4a], $ac3                             \n\t"
                    "mthi             $0,          $ac3                             \n\t"
                    "move             %[tp3],      %[tp2]                           \n\t"
                    "preceu.ph.qbr    %[p1],       %[tp1]                           \n\t"
                    "preceu.ph.qbl    %[p2],       %[tp1]                           \n\t"
                    "preceu.ph.qbr    %[p3],       %[tp2]                           \n\t"
                    "dpa.w.ph         $ac3,        %[p1],           %[vector1b]     \n\t"
                    "dpa.w.ph         $ac3,        %[p2],           %[vector2b]     \n\t"

                    /* even 2. pixel */
                    "mtlo             %[vector4a], $ac2                             \n\t"
                    "mthi             $0,          $ac2                             \n\t"
                    "dpa.w.ph         $ac2,        %[p2],           %[vector1b]     \n\t"
                    "dpa.w.ph         $ac2,        %[p3],           %[vector2b]     \n\t"
                    "extr.w           %[Temp1],    $ac3,            7               \n\t"

                    /* odd 1. pixel */
                    "ulw              %[tn1],      4(%[src_ptr])                    \n\t"
                    "balign           %[tp2],      %[tp1],          3               \n\t"
                    "mtlo             %[vector4a], $ac3                             \n\t"
                    "mthi             $0,          $ac3                             \n\t"
                    "preceu.ph.qbr    %[n1],       %[tp2]                           \n\t"
                    "preceu.ph.qbl    %[n2],       %[tp2]                           \n\t"
                    "preceu.ph.qbr    %[n3],       %[tn1]                           \n\t"
                    "extr.w           %[Temp3],    $ac2,            7               \n\t"
                    "dpa.w.ph         $ac3,        %[n1],           %[vector1b]     \n\t"
                    "dpa.w.ph         $ac3,        %[n2],           %[vector2b]     \n\t"

                    /* odd 2. pixel */
                    "mtlo             %[vector4a], $ac2                             \n\t"
                    "mthi             $0,          $ac2                             \n\t"
                    "extr.w           %[Temp2],    $ac3,            7               \n\t"
                    "dpa.w.ph         $ac2,        %[n2],           %[vector1b]     \n\t"
                    "dpa.w.ph         $ac2,        %[n3],           %[vector2b]     \n\t"
                    "extr.w           %[Temp4],    $ac2,            7               \n\t"

                    /* clamp and store results */
                    "lbux             %[tp1],      %[Temp1](%[cm])                  \n\t"
                    "lbux             %[tn1],      %[Temp2](%[cm])                  \n\t"
                    "lbux             %[tp2],      %[Temp3](%[cm])                  \n\t"
                    "sb               %[tp1],      0(%[dst_ptr])                    \n\t"
                    "sb               %[tn1],      1(%[dst_ptr])                    \n\t"
                    "lbux             %[n2],       %[Temp4](%[cm])                  \n\t"
                    "sb               %[tp2],      2(%[dst_ptr])                    \n\t"
                    "sb               %[n2],       3(%[dst_ptr])                    \n\t"

                    : [tp1] "=&r" (tp1), [tp2] "=&r" (tp2), [tp3] "=&r" (tp3),
                      [tn1] "=&r" (tn1), [p1] "=&r" (p1), [p2] "=&r" (p2),
                      [n1] "=&r" (n1), [n2] "=&r" (n2), [n3] "=&r" (n3),
                      [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2), [p3] "=&r" (p3),
                      [Temp3] "=&r" (Temp3), [Temp4] "=&r" (Temp4)
                    : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                      [vector4a] "r" (vector4a), [cm] "r" (cm), [dst_ptr] "r" (dst_ptr),
                      [src_ptr] "r" (src_ptr)
                );

                src_ptr += 4;
            }

            /* Next row... */
            src_ptr += src_pixels_per_line - 16;
            dst_ptr += pitch;
        }
    }
    else
    {
        for (i = output_height; i--;)
        {
            /* processing 4 adjacent pixels */
            for (j = 0; j < 16; j += 4)
            {
                /* apply filter with vectors pairs */
                __asm__ __volatile__ (
                    "ulw              %[tp1],      -1(%[src_ptr])                   \n\t"
                    "ulw              %[tp2],      3(%[src_ptr])                    \n\t"

                    /* even 1. pixel */
                    "mtlo             %[vector4a], $ac3                             \n\t"
                    "mthi             $0,          $ac3                             \n\t"
                    "preceu.ph.qbr    %[p1],       %[tp1]                           \n\t"
                    "preceu.ph.qbl    %[p2],       %[tp1]                           \n\t"
                    "preceu.ph.qbr    %[p3],       %[tp2]                           \n\t"
                    "dpa.w.ph         $ac3,        %[p1],           %[vector1b]     \n\t"
                    "dpa.w.ph         $ac3,        %[p2],           %[vector2b]     \n\t"

                    /* even 2. pixel */
                    "mtlo             %[vector4a], $ac2                             \n\t"
                    "mthi             $0,          $ac2                             \n\t"
                    "dpa.w.ph         $ac2,        %[p2],           %[vector1b]     \n\t"
                    "dpa.w.ph         $ac2,        %[p3],           %[vector2b]     \n\t"
                    "extr.w           %[Temp1],    $ac3,            7               \n\t"

                    /* odd 1. pixel */
                    "ulw              %[tn1],      4(%[src_ptr])                    \n\t"
                    "balign           %[tp2],      %[tp1],          3               \n\t"
                    "mtlo             %[vector4a], $ac3                             \n\t"
                    "mthi             $0,          $ac3                             \n\t"
                    "preceu.ph.qbr    %[n1],       %[tp2]                           \n\t"
                    "preceu.ph.qbl    %[n2],       %[tp2]                           \n\t"
                    "preceu.ph.qbr    %[n3],       %[tn1]                           \n\t"
                    "extr.w           %[Temp3],    $ac2,            7               \n\t"
                    "dpa.w.ph         $ac3,        %[n1],           %[vector1b]     \n\t"
                    "dpa.w.ph         $ac3,        %[n2],           %[vector2b]     \n\t"

                    /* odd 2. pixel */
                    "mtlo             %[vector4a], $ac2                             \n\t"
                    "mthi             $0,          $ac2                             \n\t"
                    "extr.w           %[Temp2],    $ac3,            7               \n\t"
                    "dpa.w.ph         $ac2,        %[n2],           %[vector1b]     \n\t"
                    "dpa.w.ph         $ac2,        %[n3],           %[vector2b]     \n\t"
                    "extr.w           %[Temp4],    $ac2,            7               \n\t"

                    /* clamp and store results */
                    "lbux             %[tp1],      %[Temp1](%[cm])                  \n\t"
                    "lbux             %[tn1],      %[Temp2](%[cm])                  \n\t"
                    "lbux             %[tp2],      %[Temp3](%[cm])                  \n\t"
                    "sb               %[tp1],      0(%[output_ptr])                 \n\t"
                    "sb               %[tn1],      1(%[output_ptr])                 \n\t"
                    "lbux             %[n2],       %[Temp4](%[cm])                  \n\t"
                    "sb               %[tp2],      2(%[output_ptr])                 \n\t"
                    "sb               %[n2],       3(%[output_ptr])                 \n\t"

                    : [tp1] "=&r" (tp1), [tp2] "=&r" (tp2), [tn1] "=&r" (tn1),
                      [p1] "=&r" (p1), [p2] "=&r" (p2), [p3] "=&r" (p3),
                      [n1] "=&r" (n1), [n2] "=&r" (n2), [n3] "=&r" (n3),
                      [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                      [Temp3] "=&r" (Temp3), [Temp4] "=&r" (Temp4)
                    : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                      [vector4a] "r" (vector4a), [cm] "r" (cm),
                      [output_ptr] "r" (output_ptr), [src_ptr] "r" (src_ptr)
                );

                src_ptr += 4;
            }

            /* next row... */
            src_ptr += src_pixels_per_line;
            output_ptr += output_width;
        }
    }
}


void vp8_filter_block2d_second_pass4
(
    unsigned char *RESTRICT src_ptr,
    unsigned char *RESTRICT output_ptr,
    int output_pitch,
    int yoffset
)
{
    unsigned int i;

    int Temp1, Temp2, Temp3, Temp4;
    unsigned int vector1b, vector2b, vector3b, vector4a;

    unsigned char src_ptr_l2;
    unsigned char src_ptr_l1;
    unsigned char src_ptr_0;
    unsigned char src_ptr_r1;
    unsigned char src_ptr_r2;
    unsigned char src_ptr_r3;

    unsigned char *cm = ff_cropTbl + CROP_WIDTH;

    vector4a = 64;

    /* load filter coefficients */
    vector1b = sub_pel_filterss[yoffset][0];
    vector2b = sub_pel_filterss[yoffset][2];
    vector3b = sub_pel_filterss[yoffset][1];

    if (vector1b)
    {
        /* 6 tap filter */

        for (i = 2; i--;)
        {
            /* prefetch src_ptr data to cache memory */
            prefetch_load(src_ptr);

            /* do not allow compiler to reorder instructions */
            __asm__ __volatile__ (
                ".set noreorder                                                 \n\t"
                :
                :
            );

            /* apply filter with vectors pairs */
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l2],  -8(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  -4(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   0(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  4(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  8(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r3],  12(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -7(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  -3(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   1(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  5(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  9(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r3],  13(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp1],       $ac2,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -6(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  -2(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   2(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  6(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  10(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  14(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp2],       $ac3,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -5(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  -1(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   3(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  7(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  11(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  15(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp3],       $ac0,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp4],       $ac1,           9               \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                  [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2),
                  [src_ptr_l2] "=&r" (src_ptr_l2), [src_ptr_r3] "=&r" (src_ptr_r3)
                : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                  [vector3b] "r" (vector3b), [vector4a] "r" (vector4a),
                  [src_ptr] "r" (src_ptr)
            );

            /* clamp and store results */
            output_ptr[0] = cm[Temp1];
            output_ptr[1] = cm[Temp2];
            output_ptr[2] = cm[Temp3];
            output_ptr[3] = cm[Temp4];

            output_ptr += output_pitch;

            /* apply filter with vectors pairs */
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l2],  -4(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  0(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_0],   4(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  8(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  12(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  16(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"
                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -3(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  1(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_0],   5(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  9(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  13(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  17(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp1],       $ac2,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -2(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  2(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_0],   6(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  10(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  14(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  18(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp2],       $ac3,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -1(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  3(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_0],   7(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  11(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  15(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  19(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp3],       $ac0,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp4],       $ac1,           9               \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                  [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2),
                  [src_ptr_l2] "=&r" (src_ptr_l2), [src_ptr_r3] "=&r" (src_ptr_r3)
                : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                  [vector3b] "r" (vector3b), [vector4a] "r" (vector4a),
                  [src_ptr] "r" (src_ptr)
            );

            /* clamp and store results */
            output_ptr[0] = cm[Temp1];
            output_ptr[1] = cm[Temp2];
            output_ptr[2] = cm[Temp3];
            output_ptr[3] = cm[Temp4];

            src_ptr += 8;
            output_ptr += output_pitch;
        }
    }
    else
    {
        /* 4 tap filter */

        /* prefetch src_ptr data to cache memory */
        prefetch_load(src_ptr);

        for (i = 2; i--;)
        {
            /* do not allow compiler to reorder instructions */
            __asm__ __volatile__ (
                ".set noreorder                                                 \n\t"
                :
                :
            );

            /* apply filter with vectors pairs */
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l1],  -4(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   0(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  4(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  8(%[src_ptr])                   \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l1],  -3(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   1(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  5(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  9(%[src_ptr])                   \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp1],       $ac2,           9               \n\t"

                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l1],  -2(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   2(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  6(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  10(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp2],       $ac3,           9               \n\t"

                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l1],  -1(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   3(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  7(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  11(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp3],       $ac0,           9               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp4],       $ac1,           9               \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                  [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [vector4a] "r" (vector4a), [src_ptr] "r" (src_ptr)
            );

            /* clamp and store results */
            output_ptr[0] = cm[Temp1];
            output_ptr[1] = cm[Temp2];
            output_ptr[2] = cm[Temp3];
            output_ptr[3] = cm[Temp4];

            output_ptr += output_pitch;

            /* apply filter with vectors pairs */
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l1],  0(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_0],   4(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  8(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  12(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l1],  1(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_0],   5(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  9(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  13(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp1],       $ac2,           9               \n\t"

                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l1],  2(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_0],   6(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  10(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  14(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp2],       $ac3,           9               \n\t"

                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l1],  3(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_0],   7(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  11(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  15(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp3],       $ac0,           9               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp4],       $ac1,           9               \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                  [Temp3] "=&r" (Temp3), [Temp4] "=r" (Temp4),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [vector4a] "r" (vector4a), [src_ptr] "r" (src_ptr)
            );

            /* clamp and store results */
            output_ptr[0] = cm[Temp1];
            output_ptr[1] = cm[Temp2];
            output_ptr[2] = cm[Temp3];
            output_ptr[3] = cm[Temp4];

            src_ptr += 8;
            output_ptr += output_pitch;
        }
    }
}


void vp8_filter_block2d_second_pass_8
(
    unsigned char *RESTRICT src_ptr,
    unsigned char *RESTRICT output_ptr,
    int output_pitch,
    unsigned int output_height,
    unsigned int output_width,
    unsigned int yoffset
)
{
    unsigned int i;

    int Temp1, Temp2, Temp3, Temp4, Temp5, Temp6, Temp7, Temp8;
    unsigned int vector1b, vector2b, vector3b, vector4a;

    unsigned char src_ptr_l2;
    unsigned char src_ptr_l1;
    unsigned char src_ptr_0;
    unsigned char src_ptr_r1;
    unsigned char src_ptr_r2;
    unsigned char src_ptr_r3;
    unsigned char *cm = ff_cropTbl + CROP_WIDTH;

    vector4a = 64;

    vector1b = sub_pel_filterss[yoffset][0];
    vector2b = sub_pel_filterss[yoffset][2];
    vector3b = sub_pel_filterss[yoffset][1];

    if (vector1b)
    {
        /* 6 tap filter */

        /* prefetch src_ptr data to cache memory */
        prefetch_load(src_ptr);

        for (i = output_height; i--;)
        {
            /* apply filter with vectors pairs */
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l2],  -16(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -8(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   0(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  8(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  16(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  24(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"

                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -15(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -7(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   1(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  9(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  17(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  25(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp1],       $ac2,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -14(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -6(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   2(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  10(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  18(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  26(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp2],       $ac3,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -13(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -5(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   3(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  11(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  19(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  27(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp3],       $ac0,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2), [Temp3] "=&r" (Temp3),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2),
                  [src_ptr_l2] "=&r" (src_ptr_l2), [src_ptr_r3] "=&r" (src_ptr_r3)
                : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                  [vector3b] "r" (vector3b), [vector4a] "r" (vector4a),
                  [src_ptr] "r" (src_ptr)
            );

            /* apply filter with vectors pairs */
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l2],  -12(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -4(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   4(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  12(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  20(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  28(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp4],       $ac1,           9               \n\t"

                "lbu            %[src_ptr_l2],  -11(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -3(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   5(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  13(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  21(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  29(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp5],       $ac2,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -10(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -2(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   6(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  14(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  22(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  30(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp6],       $ac3,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -9(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_l1],  -1(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   7(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  15(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  23(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  31(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp7],       $ac0,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp8],       $ac1,           9               \n\t"

                : [Temp4] "=&r" (Temp4), [Temp5] "=&r" (Temp5),
                  [Temp6] "=&r" (Temp6), [Temp7] "=&r" (Temp7), [Temp8] "=r" (Temp8),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2),
                  [src_ptr_l2] "=&r" (src_ptr_l2),[src_ptr_r3] "=&r" (src_ptr_r3)
                : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                  [vector3b] "r" (vector3b), [vector4a] "r" (vector4a),
                  [src_ptr] "r" (src_ptr)
            );

            /* clamp and store results */
            output_ptr[0] = cm[Temp1];
            output_ptr[1] = cm[Temp2];
            output_ptr[2] = cm[Temp3];
            output_ptr[3] = cm[Temp4];
            output_ptr[4] = cm[Temp5];
            output_ptr[5] = cm[Temp6];
            output_ptr[6] = cm[Temp7];
            output_ptr[7] = cm[Temp8];

            src_ptr += 8;
            output_ptr += output_pitch;
        }
    }
    else
    {
        /* 4 tap filter */

        /* prefetch src_ptr data to cache memory */
        prefetch_load(src_ptr);

        for (i = output_height; i--;)
        {
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l1],  -8(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   0(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  8(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  16(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                : [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [vector4a] "r" (vector4a), [src_ptr] "r" (src_ptr)
            );

            __asm__ __volatile__ (
                "lbu            %[src_ptr_l1],  -7(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   1(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  9(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r2],  17(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp1],       $ac2,           9               \n\t"

                : [Temp1] "=r" (Temp1),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [vector4a] "r" (vector4a), [src_ptr] "r" (src_ptr)
            );

            src_ptr_l1 = src_ptr[-6];
            src_ptr_0  = src_ptr[2];
            src_ptr_r1 = src_ptr[10];
            src_ptr_r2 = src_ptr[18];

            __asm__ __volatile__ (
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp2],       $ac3,           9               \n\t"

                : [Temp2] "=r" (Temp2)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [src_ptr_l1] "r" (src_ptr_l1), [src_ptr_0] "r" (src_ptr_0),
                  [src_ptr_r1] "r" (src_ptr_r1), [src_ptr_r2] "r" (src_ptr_r2),
                  [vector4a] "r" (vector4a)
            );

            src_ptr_l1 = src_ptr[-5];
            src_ptr_0  = src_ptr[3];
            src_ptr_r1 = src_ptr[11];
            src_ptr_r2 = src_ptr[19];

            __asm__ __volatile__ (
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp3],       $ac0,           9               \n\t"

                : [Temp3] "=r" (Temp3)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [src_ptr_l1] "r" (src_ptr_l1), [src_ptr_0] "r" (src_ptr_0),
                  [src_ptr_r1] "r" (src_ptr_r1), [src_ptr_r2] "r" (src_ptr_r2),
                  [vector4a] "r" (vector4a)
            );

            src_ptr_l1 = src_ptr[-4];
            src_ptr_0  = src_ptr[4];
            src_ptr_r1 = src_ptr[12];
            src_ptr_r2 = src_ptr[20];

            __asm__ __volatile__ (
                "mtlo           %[vector4a],    $ac2                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp4],       $ac1,           9               \n\t"

                : [Temp4] "=r" (Temp4)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [src_ptr_l1] "r" (src_ptr_l1), [src_ptr_0] "r" (src_ptr_0),
                  [src_ptr_r1] "r" (src_ptr_r1), [src_ptr_r2] "r" (src_ptr_r2),
                  [vector4a] "r" (vector4a)
            );

            src_ptr_l1 = src_ptr[-3];
            src_ptr_0  = src_ptr[5];
            src_ptr_r1 = src_ptr[13];
            src_ptr_r2 = src_ptr[21];

            __asm__ __volatile__ (
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp5],       $ac2,           9               \n\t"

                : [Temp5] "=&r" (Temp5)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [src_ptr_l1] "r" (src_ptr_l1), [src_ptr_0] "r" (src_ptr_0),
                  [src_ptr_r1] "r" (src_ptr_r1), [src_ptr_r2] "r" (src_ptr_r2),
                  [vector4a] "r" (vector4a)
            );

            src_ptr_l1 = src_ptr[-2];
            src_ptr_0  = src_ptr[6];
            src_ptr_r1 = src_ptr[14];
            src_ptr_r2 = src_ptr[22];

            __asm__ __volatile__ (
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp6],       $ac3,           9               \n\t"

                : [Temp6] "=r" (Temp6)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [src_ptr_l1] "r" (src_ptr_l1), [src_ptr_0] "r" (src_ptr_0),
                  [src_ptr_r1] "r" (src_ptr_r1), [src_ptr_r2] "r" (src_ptr_r2),
                  [vector4a] "r" (vector4a)
            );

            src_ptr_l1 = src_ptr[-1];
            src_ptr_0  = src_ptr[7];
            src_ptr_r1 = src_ptr[15];
            src_ptr_r2 = src_ptr[23];

            __asm__ __volatile__ (
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp7],       $ac0,           9               \n\t"
                "extp           %[Temp8],       $ac1,           9               \n\t"

                : [Temp7] "=&r" (Temp7), [Temp8] "=r" (Temp8)
                : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                  [src_ptr_l1] "r" (src_ptr_l1), [src_ptr_0] "r" (src_ptr_0),
                  [src_ptr_r1] "r" (src_ptr_r1), [src_ptr_r2] "r" (src_ptr_r2),
                  [vector4a] "r" (vector4a)
            );

            /* clamp and store results */
            output_ptr[0] = cm[Temp1];
            output_ptr[1] = cm[Temp2];
            output_ptr[2] = cm[Temp3];
            output_ptr[3] = cm[Temp4];
            output_ptr[4] = cm[Temp5];
            output_ptr[5] = cm[Temp6];
            output_ptr[6] = cm[Temp7];
            output_ptr[7] = cm[Temp8];

            src_ptr += 8;
            output_ptr += output_pitch;
        }
    }
}


void vp8_filter_block2d_second_pass161
(
    unsigned char *RESTRICT src_ptr,
    unsigned char *RESTRICT output_ptr,
    int output_pitch,
    const unsigned short *vp8_filter
)
{
    unsigned int i, j;

    int Temp1, Temp2, Temp3, Temp4, Temp5, Temp6, Temp7, Temp8;
    unsigned int vector4a;
    unsigned int vector1b, vector2b, vector3b;

    unsigned char src_ptr_l2;
    unsigned char src_ptr_l1;
    unsigned char src_ptr_0;
    unsigned char src_ptr_r1;
    unsigned char src_ptr_r2;
    unsigned char src_ptr_r3;
    unsigned char *cm = ff_cropTbl + CROP_WIDTH;

    vector4a = 64;

    vector1b = vp8_filter[0];
    vector2b = vp8_filter[2];
    vector3b = vp8_filter[1];

    if (vector1b == 0)
    {
        /* 4 tap filter */

        /* prefetch src_ptr data to cache memory */
        prefetch_load(src_ptr + 16);

        for (i = 16; i--;)
        {
            /* unrolling for loop */
            for (j = 0; j < 16; j += 8)
            {
                /* apply filter with vectors pairs */
                __asm__ __volatile__ (
                    "lbu            %[src_ptr_l1],  -16(%[src_ptr])                 \n\t"
                    "lbu            %[src_ptr_0],   0(%[src_ptr])                   \n\t"
                    "lbu            %[src_ptr_r1],  16(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_r2],  32(%[src_ptr])                  \n\t"
                    "mtlo           %[vector4a],    $ac2                            \n\t"
                    "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                    "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                    "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                    "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                    "lbu            %[src_ptr_l1],  -15(%[src_ptr])                 \n\t"
                    "lbu            %[src_ptr_0],   1(%[src_ptr])                   \n\t"
                    "lbu            %[src_ptr_r1],  17(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_r2],  33(%[src_ptr])                  \n\t"
                    "mtlo           %[vector4a],    $ac3                            \n\t"
                    "extp           %[Temp1],       $ac2,           9               \n\t"

                    "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                    "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                    "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                    "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                    "lbu            %[src_ptr_l1],  -14(%[src_ptr])                 \n\t"
                    "lbu            %[src_ptr_0],   2(%[src_ptr])                   \n\t"
                    "lbu            %[src_ptr_r1],  18(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_r2],  34(%[src_ptr])                  \n\t"
                    "mtlo           %[vector4a],    $ac1                            \n\t"
                    "extp           %[Temp2],       $ac3,           9               \n\t"

                    "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                    "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                    "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                    "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"

                    "lbu            %[src_ptr_l1],  -13(%[src_ptr])                 \n\t"
                    "lbu            %[src_ptr_0],   3(%[src_ptr])                   \n\t"
                    "lbu            %[src_ptr_r1],  19(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_r2],  35(%[src_ptr])                  \n\t"
                    "mtlo           %[vector4a],    $ac3                            \n\t"
                    "extp           %[Temp3],       $ac1,           9               \n\t"

                    "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                    "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                    "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                    "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                    "lbu            %[src_ptr_l1],  -12(%[src_ptr])                 \n\t"
                    "lbu            %[src_ptr_0],   4(%[src_ptr])                   \n\t"
                    "lbu            %[src_ptr_r1],  20(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_r2],  36(%[src_ptr])                  \n\t"
                    "mtlo           %[vector4a],    $ac2                            \n\t"
                    "extp           %[Temp4],       $ac3,           9               \n\t"

                    "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                    "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                    "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                    "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                    "lbu            %[src_ptr_l1],  -11(%[src_ptr])                 \n\t"
                    "lbu            %[src_ptr_0],   5(%[src_ptr])                   \n\t"
                    "lbu            %[src_ptr_r1],  21(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_r2],  37(%[src_ptr])                  \n\t"
                    "mtlo           %[vector4a],    $ac3                            \n\t"
                    "extp           %[Temp5],       $ac2,           9               \n\t"

                    "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                    "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                    "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                    "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                    "lbu            %[src_ptr_l1],  -10(%[src_ptr])                 \n\t"
                    "lbu            %[src_ptr_0],   6(%[src_ptr])                   \n\t"
                    "lbu            %[src_ptr_r1],  22(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_r2],  38(%[src_ptr])                  \n\t"
                    "mtlo           %[vector4a],    $ac1                            \n\t"
                    "extp           %[Temp6],       $ac3,           9               \n\t"

                    "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                    "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                    "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                    "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"

                    "lbu            %[src_ptr_l1],  -9(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_0],   7(%[src_ptr])                   \n\t"
                    "lbu            %[src_ptr_r1],  23(%[src_ptr])                  \n\t"
                    "lbu            %[src_ptr_r2],  39(%[src_ptr])                  \n\t"
                    "mtlo           %[vector4a],    $ac3                            \n\t"
                    "extp           %[Temp7],       $ac1,           9               \n\t"

                    "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                    "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                    "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                    "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"
                    "extp           %[Temp8],       $ac3,           9               \n\t"

                    : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                      [Temp3] "=&r" (Temp3), [Temp4] "=&r" (Temp4),
                      [Temp5] "=&r" (Temp5), [Temp6] "=&r" (Temp6),
                      [Temp7] "=&r" (Temp7), [Temp8] "=r" (Temp8),
                      [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                      [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2)
                    : [vector2b] "r" (vector2b), [vector3b] "r" (vector3b),
                      [vector4a] "r" (vector4a), [src_ptr] "r" (src_ptr)
                );

                /* clamp and store results */
                output_ptr[j] = cm[Temp1];
                output_ptr[j + 1] = cm[Temp2];
                output_ptr[j + 2] = cm[Temp3];
                output_ptr[j + 3] = cm[Temp4];
                output_ptr[j + 4] = cm[Temp5];
                output_ptr[j + 5] = cm[Temp6];
                output_ptr[j + 6] = cm[Temp7];
                output_ptr[j + 7] = cm[Temp8];

                src_ptr += 8;
            }

            output_ptr += output_pitch;
        }
    }
    else
    {
        /* 4 tap filter */

        /* prefetch src_ptr data to cache memory */
        prefetch_load(src_ptr + 16);

        /* unroll for loop */
        for (i = 16; i--;)
        {
            /* apply filter with vectors pairs */
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l2],  -32(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -16(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_0],   0(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  16(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  32(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  48(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -31(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -15(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_0],   1(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  17(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  33(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  49(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp1],       $ac2,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -30(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -14(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_0],   2(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  18(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  34(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  50(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp2],       $ac0,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -29(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -13(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_0],   3(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  19(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  35(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  51(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp3],       $ac1,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -28(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -12(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_0],   4(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  20(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  36(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  52(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"
                "extp           %[Temp4],       $ac3,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -27(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -11(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_0],   5(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  21(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  37(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  53(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp5],       $ac2,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -26(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -10(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_0],   6(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  22(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  38(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  54(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp6],       $ac0,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -25(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -9(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   7(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  23(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  39(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  55(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp7],       $ac1,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp8],       $ac3,           9               \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                  [Temp3] "=&r" (Temp3), [Temp4] "=&r" (Temp4),
                  [Temp5] "=&r" (Temp5), [Temp6] "=&r" (Temp6),
                  [Temp7] "=&r" (Temp7), [Temp8] "=r" (Temp8),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2),
                  [src_ptr_l2] "=&r" (src_ptr_l2),[src_ptr_r3] "=&r" (src_ptr_r3)
                : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                  [vector3b] "r" (vector3b), [vector4a] "r" (vector4a),
                  [src_ptr] "r" (src_ptr)
            );

            /* clamp and store results */
            output_ptr[0] = cm[Temp1];
            output_ptr[1] = cm[Temp2];
            output_ptr[2] = cm[Temp3];
            output_ptr[3] = cm[Temp4];
            output_ptr[4] = cm[Temp5];
            output_ptr[5] = cm[Temp6];
            output_ptr[6] = cm[Temp7];
            output_ptr[7] = cm[Temp8];

            /* apply filter with vectors pairs */
            __asm__ __volatile__ (
                "lbu            %[src_ptr_l2],  -24(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -8(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   8(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  24(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  40(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  56(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -23(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -7(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   9(%[src_ptr])                   \n\t"
                "lbu            %[src_ptr_r1],  25(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  41(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  57(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp1],       $ac2,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -22(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -6(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   10(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r1],  26(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  42(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  58(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp2],       $ac0,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -21(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -5(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   11(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r1],  27(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  43(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  59(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp3],       $ac1,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -20(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -4(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   12(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r1],  28(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  44(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  60(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac2                            \n\t"
                "extp           %[Temp4],       $ac3,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac2,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac2,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -19(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -3(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   13(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r1],  29(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  45(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  61(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac0                            \n\t"
                "extp           %[Temp5],       $ac2,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac0,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac0,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -18(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -2(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   14(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r1],  30(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  46(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  62(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac1                            \n\t"
                "extp           %[Temp6],       $ac0,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac1,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac1,           %[src_ptr_l1],  %[vector3b]     \n\t"

                "lbu            %[src_ptr_l2],  -17(%[src_ptr])                 \n\t"
                "lbu            %[src_ptr_l1],  -1(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_0],   15(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r1],  31(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r2],  47(%[src_ptr])                  \n\t"
                "lbu            %[src_ptr_r3],  63(%[src_ptr])                  \n\t"
                "mtlo           %[vector4a],    $ac3                            \n\t"
                "extp           %[Temp7],       $ac1,           9               \n\t"

                "append         %[src_ptr_l2],  %[src_ptr_r3],  8               \n\t"
                "append         %[src_ptr_0],   %[src_ptr_r1],  8               \n\t"
                "append         %[src_ptr_l1],  %[src_ptr_r2],  8               \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_l2],  %[vector1b]     \n\t"
                "dpau.h.qbr     $ac3,           %[src_ptr_0],   %[vector2b]     \n\t"
                "dpsu.h.qbr     $ac3,           %[src_ptr_l1],  %[vector3b]     \n\t"
                "extp           %[Temp8],       $ac3,           9               \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2),
                  [Temp3] "=&r" (Temp3), [Temp4] "=&r" (Temp4),
                  [Temp5] "=&r" (Temp5), [Temp6] "=&r" (Temp6),
                  [Temp7] "=&r" (Temp7), [Temp8] "=r" (Temp8),
                  [src_ptr_l1] "=&r" (src_ptr_l1), [src_ptr_0] "=&r" (src_ptr_0),
                  [src_ptr_r1] "=&r" (src_ptr_r1), [src_ptr_r2] "=&r" (src_ptr_r2),
                  [src_ptr_l2] "=&r" (src_ptr_l2), [src_ptr_r3] "=&r" (src_ptr_r3)
                : [vector1b] "r" (vector1b), [vector2b] "r" (vector2b),
                  [vector3b] "r" (vector3b), [vector4a] "r" (vector4a),
                  [src_ptr] "r" (src_ptr)
            );

            src_ptr += 16;
            output_ptr[8] = cm[Temp1];
            output_ptr[9] = cm[Temp2];
            output_ptr[10] = cm[Temp3];
            output_ptr[11] = cm[Temp4];
            output_ptr[12] = cm[Temp5];
            output_ptr[13] = cm[Temp6];
            output_ptr[14] = cm[Temp7];
            output_ptr[15] = cm[Temp8];

            output_ptr += output_pitch;
        }
    }
}


void vp8_sixtap_predict4x4_dspr2
(
    unsigned char *RESTRICT src_ptr,
    int   src_pixels_per_line,
    int  xoffset,
    int  yoffset,
    unsigned char *RESTRICT dst_ptr,
    int dst_pitch
)
{
    unsigned char FData[9 * 4]; /* Temp data bufffer used in filtering */
    unsigned int pos = 16;

    /* bit positon for extract from acc */
    __asm__ __volatile__ (
        "wrdsp      %[pos],     1           \n\t"
        :
        : [pos] "r" (pos)
    );

    if (yoffset)
    {
        /* First filter 1-D horizontally... */
        vp8_filter_block2d_first_pass_4(src_ptr - (2 * src_pixels_per_line), FData,
                                        src_pixels_per_line, 9, xoffset, 4);
        /* then filter verticaly... */
        vp8_filter_block2d_second_pass4(FData + 8, dst_ptr, dst_pitch, yoffset);
    }
    else
        /* if (yoffsset == 0) vp8_filter_block2d_first_pass save data to dst_ptr */
        vp8_filter_block2d_first_pass_4(src_ptr, dst_ptr, src_pixels_per_line,
                                        4, xoffset, dst_pitch);
}


void vp8_sixtap_predict8x8_dspr2
(
    unsigned char   *RESTRICT src_ptr,
    int  src_pixels_per_line,
    int  xoffset,
    int  yoffset,
    unsigned char *RESTRICT dst_ptr,
    int  dst_pitch
)
{

    unsigned char FData[13 * 8]; /* Temp data bufffer used in filtering */
    unsigned int pos, Temp1, Temp2;

    pos = 16;

    /* bit positon for extract from acc */
    __asm__ __volatile__ (
        "wrdsp      %[pos],     1               \n\t"
        :
        : [pos] "r" (pos)
    );

    if (yoffset)
    {

        src_ptr = src_ptr - (2 * src_pixels_per_line);

        if (xoffset)
            /* filter 1-D horizontally... */
            vp8_filter_block2d_first_pass_8_all(src_ptr, FData, src_pixels_per_line,
                                                13, xoffset, 8);

        else
        {
            /* prefetch src_ptr data to cache memory */
            prefetch_load(src_ptr + 2 * src_pixels_per_line);

            __asm__ __volatile__ (
                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   0(%[FData])                             \n\t"
                "sw     %[Temp2],   4(%[FData])                             \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   8(%[FData])                             \n\t"
                "sw     %[Temp2],   12(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   16(%[FData])                            \n\t"
                "sw     %[Temp2],   20(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   24(%[FData])                            \n\t"
                "sw     %[Temp2],   28(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   32(%[FData])                            \n\t"
                "sw     %[Temp2],   36(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   40(%[FData])                            \n\t"
                "sw     %[Temp2],   44(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   48(%[FData])                            \n\t"
                "sw     %[Temp2],   52(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   56(%[FData])                            \n\t"
                "sw     %[Temp2],   60(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   64(%[FData])                            \n\t"
                "sw     %[Temp2],   68(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   72(%[FData])                            \n\t"
                "sw     %[Temp2],   76(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   80(%[FData])                            \n\t"
                "sw     %[Temp2],   84(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   88(%[FData])                            \n\t"
                "sw     %[Temp2],   92(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   96(%[FData])                            \n\t"
                "sw     %[Temp2],   100(%[FData])                           \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2)
                : [FData] "r" (FData), [src_ptr] "r" (src_ptr),
                  [src_pixels_per_line] "r" (src_pixels_per_line)
            );
        }

        /* filter verticaly... */
        vp8_filter_block2d_second_pass_8(FData + 16, dst_ptr, dst_pitch, 8, 8, yoffset);
    }

    /* if (yoffsset == 0) vp8_filter_block2d_first_pass save data to dst_ptr */
    else
    {
        if (xoffset)
            vp8_filter_block2d_first_pass_8_all(src_ptr, dst_ptr, src_pixels_per_line,
                                                8, xoffset, dst_pitch);

        else
        {
            /* copy from src buffer to dst buffer */
            __asm__ __volatile__ (
                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   0(%[dst_ptr])                           \n\t"
                "sw     %[Temp2],   4(%[dst_ptr])                           \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   8(%[dst_ptr])                           \n\t"
                "sw     %[Temp2],   12(%[dst_ptr])                          \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   16(%[dst_ptr])                          \n\t"
                "sw     %[Temp2],   20(%[dst_ptr])                          \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   24(%[dst_ptr])                          \n\t"
                "sw     %[Temp2],   28(%[dst_ptr])                          \n\t"
                "addu   %[src_ptr], %[src_ptr],   %[src_pixels_per_line]    \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   32(%[dst_ptr])                          \n\t"
                "sw     %[Temp2],   36(%[dst_ptr])                          \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   40(%[dst_ptr])                          \n\t"
                "sw     %[Temp2],   44(%[dst_ptr])                          \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   48(%[dst_ptr])                          \n\t"
                "sw     %[Temp2],   52(%[dst_ptr])                          \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   56(%[dst_ptr])                          \n\t"
                "sw     %[Temp2],   60(%[dst_ptr])                          \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2)
                : [dst_ptr] "r" (dst_ptr), [src_ptr] "r" (src_ptr),
                  [src_pixels_per_line] "r" (src_pixels_per_line)
            );
        }
    }
}


void vp8_sixtap_predict8x4_dspr2
(
    unsigned char   *RESTRICT src_ptr,
    int  src_pixels_per_line,
    int  xoffset,
    int  yoffset,
    unsigned char *RESTRICT dst_ptr,
    int  dst_pitch
)
{
    unsigned char FData[9 * 8]; /* Temp data bufffer used in filtering */
    unsigned int pos, Temp1, Temp2;

    pos = 16;

    /* bit positon for extract from acc */
    __asm__ __volatile__ (
        "wrdsp      %[pos],     1           \n\t"
        :
        : [pos] "r" (pos)
    );

    if (yoffset)
    {

        src_ptr = src_ptr - (2 * src_pixels_per_line);

        if (xoffset)
            /* filter 1-D horizontally... */
            vp8_filter_block2d_first_pass_8_all(src_ptr, FData, src_pixels_per_line,
                                                9, xoffset, 8);

        else
        {
            /* prefetch src_ptr data to cache memory */
            prefetch_load(src_ptr + 2 * src_pixels_per_line);

            __asm__ __volatile__ (
                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   0(%[FData])                             \n\t"
                "sw     %[Temp2],   4(%[FData])                             \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   8(%[FData])                             \n\t"
                "sw     %[Temp2],   12(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   16(%[FData])                            \n\t"
                "sw     %[Temp2],   20(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   24(%[FData])                            \n\t"
                "sw     %[Temp2],   28(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   32(%[FData])                            \n\t"
                "sw     %[Temp2],   36(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   40(%[FData])                            \n\t"
                "sw     %[Temp2],   44(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   48(%[FData])                            \n\t"
                "sw     %[Temp2],   52(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   56(%[FData])                            \n\t"
                "sw     %[Temp2],   60(%[FData])                            \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   64(%[FData])                            \n\t"
                "sw     %[Temp2],   68(%[FData])                            \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2)
                : [FData] "r" (FData), [src_ptr] "r" (src_ptr),
                  [src_pixels_per_line] "r" (src_pixels_per_line)
            );
        }

        /* filter verticaly... */
        vp8_filter_block2d_second_pass_8(FData + 16, dst_ptr, dst_pitch, 4, 8, yoffset);
    }

    /* if (yoffsset == 0) vp8_filter_block2d_first_pass save data to dst_ptr */
    else
    {
        if (xoffset)
            vp8_filter_block2d_first_pass_8_all(src_ptr, dst_ptr, src_pixels_per_line,
                                                4, xoffset, dst_pitch);

        else
        {
            /* copy from src buffer to dst buffer */
            __asm__ __volatile__ (
                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   0(%[dst_ptr])                           \n\t"
                "sw     %[Temp2],   4(%[dst_ptr])                           \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   8(%[dst_ptr])                           \n\t"
                "sw     %[Temp2],   12(%[dst_ptr])                          \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   16(%[dst_ptr])                          \n\t"
                "sw     %[Temp2],   20(%[dst_ptr])                          \n\t"
                "addu   %[src_ptr], %[src_ptr],    %[src_pixels_per_line]   \n\t"

                "ulw    %[Temp1],   0(%[src_ptr])                           \n\t"
                "ulw    %[Temp2],   4(%[src_ptr])                           \n\t"
                "sw     %[Temp1],   24(%[dst_ptr])                          \n\t"
                "sw     %[Temp2],   28(%[dst_ptr])                          \n\t"

                : [Temp1] "=&r" (Temp1), [Temp2] "=&r" (Temp2)
                : [dst_ptr] "r" (dst_ptr), [src_ptr] "r" (src_ptr),
                  [src_pixels_per_line] "r" (src_pixels_per_line)
            );
        }
    }
}


void vp8_sixtap_predict16x16_dspr2
(
    unsigned char   *RESTRICT src_ptr,
    int  src_pixels_per_line,
    int  xoffset,
    int  yoffset,
    unsigned char *RESTRICT dst_ptr,
    int  dst_pitch
)
{
    const unsigned short *VFilter;
    unsigned char FData[21 * 16]; /* Temp data bufffer used in filtering */
    unsigned int pos;

    VFilter = sub_pel_filterss[yoffset];

    pos = 16;

    /* bit positon for extract from acc */
    __asm__ __volatile__ (
        "wrdsp      %[pos],     1           \n\t"
        :
        : [pos] "r" (pos)
    );

    if (yoffset)
    {

        src_ptr = src_ptr - (2 * src_pixels_per_line);

        switch (xoffset)
        {
            /* filter 1-D horizontally... */
        case 2:
        case 4:
        case 6:
            /* 6 tap filter */
            vp8_filter_block2d_first_pass16_6tap(src_ptr, FData, src_pixels_per_line,
                                                 21, xoffset, 16);
            break;

        case 0:
            /* only copy buffer */
            vp8_filter_block2d_first_pass16_0(src_ptr, FData, src_pixels_per_line);
            break;

        case 1:
        case 3:
        case 5:
        case 7:
            /* 4 tap filter */
            vp8_filter_block2d_first_pass16_4tap(src_ptr, FData, src_pixels_per_line, 16,
                                                 21, xoffset, yoffset, dst_ptr, dst_pitch);
            break;
        }

        /* filter verticaly... */
        vp8_filter_block2d_second_pass161(FData + 32, dst_ptr, dst_pitch, VFilter);
    }
    else
    {
        /* if (yoffsset == 0) vp8_filter_block2d_first_pass save data to dst_ptr */
        switch (xoffset)
        {
        case 2:
        case 4:
        case 6:
            /* 6 tap filter */
            vp8_filter_block2d_first_pass16_6tap(src_ptr, dst_ptr, src_pixels_per_line,
                                                 16, xoffset, dst_pitch);
            break;

        case 1:
        case 3:
        case 5:
        case 7:
            /* 4 tap filter */
            vp8_filter_block2d_first_pass16_4tap(src_ptr, dst_ptr, src_pixels_per_line, 16,
                                                 21, xoffset, yoffset, dst_ptr, dst_pitch);
            break;
        }
    }
}

#endif