blob: 70bb7561cd1aa4aaf65b7ad83821daefd2cb4697 [file] [log] [blame]
// Copyright 2014 The Cobalt Authors. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "cobalt/browser/switches.h"
#include <map>
namespace cobalt {
namespace browser {
namespace switches {
// NOTE: If a new switch is to be defined, the switch along with its help
// message needs to be inserted to the help_map manually.
#if defined(ENABLE_DEBUG_COMMAND_LINE_SWITCHES)
const char kDebugConsoleMode[] = "debug_console";
const char kDebugConsoleModeHelp[] =
"Switches different debug console modes: on | hud | off";
const char kDevServersListenIp[] = "dev_servers_listen_ip";
const char kDevServersListenIpHelp[] =
"IP address of the interface that internal development servers (remote web "
"debugger and WebDriver) listen on. If unspecified, INADDR_ANY (on most "
"platforms). Tip: To listen to ANY interface use \"::\" (\"0.0.0.0\" for "
"IPv4), and to listen to LOOPBACK use \"::1\" (\"127.0.0.1\" for IPv4)";
#if defined(ENABLE_DEBUGGER)
const char kDisableWebDebugger[] = "disable_web_debugger";
const char kDisableWebDebuggerHelp[] = "Disable support for the web debugger";
const char kRemoteDebuggingPort[] = "remote_debugging_port";
const char kRemoteDebuggingPortHelp[] =
"Remote web debugger is served from the specified port. If 0, then the "
"remote web debugger is disabled.";
const char kWaitForWebDebugger[] = "wait_for_web_debugger";
const char kWaitForWebDebuggerHelp[] =
"Waits for remote web debugger to connect before loading the page. A "
"number may optionally be specified to indicate which in a sequence of "
"page loads should wait. For example, if the startup URL is a loader and "
"that loader changes window.location to the URL of the actual app, then "
"specify 1 to debug the loader or 2 to debug the app.";
#endif // ENABLE_DEBUGGER
const char kDisableImageAnimations[] = "disable_image_animations";
const char kDisableImageAnimationsHelp[] =
"Enables/disables animations on animated images (e.g. animated WebP).";
const char kForceDeterministicRendering[] = "force_deterministic_rendering";
const char kForceDeterministicRenderingHelp[] =
"Forces the renderer to avoid doing anything that may result in "
"1-pixel-off non-deterministic rendering output. For example, a renderer "
"may implement an optimization where text glyphs are rendered once and "
"cached and re-used in situations where the cached glyph is approximately "
"very similar, even if it is not exactly the same. Setting this flag "
"avoids that kind of behavior, allowing strict screen-diff tests to pass.";
const char kDisableMediaCodecs[] = "disable_media_codecs";
const char kDisableMediaCodecsHelp[] =
"Disables the semicolon-separated list of codecs that will be treated as "
"unsupported for media playback. Used for debugging and testing purposes."
"It uses sub-string match to determine whether a codec is disabled, for "
"example, setting the value to \"avc;hvc\" will disable any h264 and h265 "
"playbacks.";
const char kDisableMediaEncryptionSchemes[] =
"disable_media_encryption_schemes";
const char kDisableMediaEncryptionSchemesHelp[] =
"Disables the semicolon-separated list of encryption schemes that will be "
"treated as unsupported for encrypted media playback. Used for debugging "
"and testing purposes. For example, setting the value to \"cenc;cbcs\" "
"will disable any cenc and cbcs DRM playbacks. Accepted values: \"cenc\", "
"\"cbcs\", \"cbcs-1-9\".";
const char kDisableOnScreenKeyboard[] = "disable_on_screen_keyboard";
const char kDisableOnScreenKeyboardHelp[] =
"Disable the on screen keyboard for testing.";
const char kDisableRasterizerCaching[] = "disable_rasterizer_caching";
const char kDisableRasterizerCachingHelp[] =
"Disables caching of rasterized render tree nodes; caching improves "
"performance but may result in sub-pixel differences. Note that this "
"is deprecated, the '--force_deterministic_rendering' flag should be "
"used instead which does the same thing.";
const char kDisableSignIn[] = "disable_sign_in";
const char kDisableSignInHelp[] =
"Disables sign-in on platforms that use H5VCC Account Manager.";
const char kDisableSplashScreenOnReloads[] = "disable_splash_screen_on_reloads";
const char kDisableSplashScreenOnReloadsHelp[] =
"Disables the splash screen on reloads; instead it will only appear on the "
"first navigate.";
const char kDisableWebDriver[] = "disable_webdriver";
const char kDisableWebDriverHelp[] = "Do not create the WebDriver server.";
const char kExtraWebFileDir[] = "web_file_path";
const char kExtraWebFileDirHelp[] =
"Additional base directory for accessing web files via file://.";
const char kFakeMicrophone[] = "fake_microphone";
const char kFakeMicrophoneHelp[] =
"If this flag is set, fake microphone will be used to mock the user voice "
"input.";
const char kIgnoreCertificateErrors[] = "ignore_certificate_errors";
const char kIgnoreCertificateErrorsHelp[] =
"Setting this switch causes all certificate errors to be ignored.";
const char kInputFuzzer[] = "input_fuzzer";
const char kInputFuzzerHelp[] =
"If this flag is set, input will be continuously generated randomly "
"instead of taken from an external input device (like a controller).";
const char kMinCompatibilityVersion[] = "min_compatibility_version";
const char kMinCompatibilityVersionHelp[] =
"The minimum version of Cobalt that will be checked during compatibility "
"validations.";
const char kNullSavegame[] = "null_savegame";
const char kNullSavegameHelp[] =
"Setting NullSavegame will result in no data being read from previous "
"sessions and no data being persisted to future sessions. It effectively "
"makes the app run as if it has no local storage.";
const char kProd[] = "prod";
const char kProdHelp[] =
"Several checks are not enabled by default in non-production(gold) build. "
"Use this flag to simulate production build behavior.";
const char kRequireCSP[] = "require_csp";
const char kRequireCSPHelp[] =
"Forbid Cobalt to start without receiving csp headers which is enabled by "
"default in production.";
const char kAllowAllCrossOrigin[] = "allow_all_cross_origin";
const char kAllowAllCrossOriginHelp[] =
"Disables SOP checks and allows all cross-origin connections in "
"development builds.";
const char kRequireHTTPSLocation[] = "require_https";
const char kRequireHTTPSLocationHelp[] =
"Ask Cobalt to only accept https url which is enabled by default in "
"production.";
const char kShutdownAfter[] = "shutdown_after";
const char kShutdownAfterHelp[] =
"If this flag is set, Cobalt will automatically shutdown after the "
"specified number of seconds have passed.";
const char kStubImageDecoder[] = "stub_image_decoder";
const char kStubImageDecoderHelp[] =
"Decode all images using StubImageDecoder.";
const char kSuspendFuzzer[] = "suspend_fuzzer";
const char kSuspendFuzzerHelp[] =
"If this flag is set, alternating calls to |SbSystemRequestSuspend| and "
"|SbSystemRequestUnpause| will be made periodically.";
const char kTimedTrace[] = "timed_trace";
const char kTimedTraceHelp[] =
"If this is set, then a trace (see base/debug/trace_eventh.h) is started "
"on Cobalt startup. A value must also be specified for this switch, "
"which is the duration in seconds of how long the trace will be done "
"for before ending and saving the results to disk. Results will be saved"
" to the file timed_trace.json in the log output directory.";
const char kUserAgent[] = "user_agent";
const char kUserAgentHelp[] =
"Specifies a custom user agent for device simulations. The expected "
"format is \"Mozilla/5.0 ('os_name_and_version') Cobalt/'cobalt_version'."
"'cobalt_build_version_number'-'build_configuration' (unlike Gecko) "
"'javascript_engine_version' 'rasterizer_type' 'starboard_version', "
"'network_operator'_'device_type'_'chipset_model_number'_'model_year'/"
"'firmware_version' ('brand', 'model', 'connection_type') 'aux_field'\".";
const char kUserAgentClientHints[] = "user_agent_client_hints";
const char kUserAgentClientHintsHelp[] =
"Specify custom user agent client hints for device simulations. "
"Configure user agent fields in a string delimited by semicolon ';'. "
"If semicolon is expected to be in value of any user agent field, "
"escape the semicolon by prefixing it with backslash '\\'. "
"Empty field value is allowed. "
"Example: "
"--user_agent_client_hints=\"device_type=GAME;"
"os_name_and_version=Linux armeabi-v7a\\; Android 7.1.2;evergreen_type=\" "
"The 18 supported UA fields for overriding are: aux_field, brand, "
"build_configuration, chipset_model_number, cobalt_build_version_number, "
"cobalt_build_version_number, connection_type, device_type, "
"evergreen_type,evergreen_version, firmware_version, "
"javascript_engine_version, model, model_year, "
"original_design_manufacturer, os_name_and_version, starboard_version, "
"rasterizer_type";
const char kUserAgentOsNameVersion[] = "user_agent_os_name_version";
const char kUserAgentOsNameVersionHelp[] =
"Specifies a custom 'os_name_and_version' user agent field with otherwise "
"default user agent fields. Example: \"X11; Linux x86_64\".";
const char kUseTTS[] = "use_tts";
const char kUseTTSHelp[] =
"Enable text-to-speech functionality, for platforms that implement the "
"speech synthesis API. If the platform doesn't have speech synthesis, "
"TTSLogger will be used instead.";
const char kWatchdog[] = "watchdog";
const char kWatchdogHelp[] =
"Watchdog debug delay settings that correspond to "
"delay_name_,delay_wait_time_microseconds_,delay_sleep_time_microseconds_ "
"separated by commas (ex. \"renderer,100000,1000\").";
const char kWebDriverPort[] = "webdriver_port";
const char kWebDriverPortHelp[] =
"Port that the WebDriver server should be listening on.";
#endif // ENABLE_DEBUG_COMMAND_LINE_SWITCHES
const char kMinLogLevel[] = "min_log_level";
const char kMinLogLevelHelp[] =
"Set the minimum logging level: info|warning|error|fatal.";
const char kDisableJavaScriptJit[] = "disable_javascript_jit";
const char kDisableJavaScriptJitHelp[] =
"Specifies that javascript jit should be disabled.";
const char kDisableMapToMesh[] = "disable_map_to_mesh";
const char kDisableMapToMeshHelp[] =
"Specifies that map to mesh should be disabled. Cobalt maps 360 video "
"textures onto a sphere in order to project 360 video onto the viewport "
"by default. Specifying this flag renders 360 degree video unprojected.";
const char kDisableTimerResolutionLimit[] = "disable_timer_resolution_limit";
const char kDisableTimerResolutionLimitHelp[] =
"By default, window.performance.now() will return values at a clamped "
"minimum resolution of 20us. By specifying this flag, the limit will be "
"removed and the resolution will be 1us (or larger depending on the "
"platform.";
const char kDisableUpdaterModule[] = "disable_updater_module";
const char kDisableUpdaterModuleHelp[] =
"Disables the Cobalt Evergreen UpdaterModule which is responsible for "
"downloading and installing new Cobalt updates. Passing the flag is "
"equivalent to opting out from further updates.";
const char kEncodedImageCacheSizeInBytes[] =
"encoded_image_cache_size_in_bytes";
const char kEncodedImageCacheSizeInBytesHelp[] =
"Determines the capacity of the encoded image cache which manages encoded "
"images downloaded from a web page. The cache uses CPU memory.";
const char kForceMigrationForStoragePartitioning[] =
"force_migration_for_storage_partitioning";
const char kForceMigrationForStoragePartitioningHelp[] =
"Overrides the default storage migration policy when upgrading to "
"partitioned storage and forces data migration regardless of the"
"initial app url. The default policy is to migrate data only for"
"https://www.youtube.com/tv.";
// If toggled, framerate statistics will be printed to stdout after each
// animation completes, or after a maximum number of frames has been collected.
const char kFPSPrint[] = "fps_stdout";
const char kFPSPrintHelp[] =
"If toggled, framerate statistics will be printed to stdout after each "
"animation completes, or after a maximum number of frames has been "
"collected.";
const char kFPSOverlay[] = "fps_overlay";
const char kFPSOverlayHelp[] =
"If toggled, framerate statistics will be displayed in an on-screen "
"overlay and updated after each animation completes, or after a maximum "
"number of frames has been collected.";
const char kHelp[] = "help";
const char kHelpHelp[] = "Prints help information of cobalt command";
const char kImageCacheSizeInBytes[] = "image_cache_size_in_bytes";
const char kImageCacheSizeInBytesHelp[] =
"Determines the capacity of the image cache which manages image "
"surfaces downloaded from a web page. While it depends on the platform, "
"often (and ideally) these images are cached within GPU memory.";
const char kInitialURL[] = "url";
const char kInitialURLHelp[] =
"Setting this switch defines the startup URL that Cobalt will use. If no "
"value is set, a default URL will be used.";
const char kLocalStoragePartitionUrl[] = "local_storage_partition_url";
const char kLocalStoragePartitionUrlHelp[] =
"Overrides the default storage partition with a custom partition URL to "
"use for local storage. The provided URL is canonicalized.";
const char kMaxCobaltCpuUsage[] = "max_cobalt_cpu_usage";
const char kMaxCobaltCpuUsageHelp[] =
"Specifies the maximum CPU usage of the cobalt.";
const char kMaxCobaltGpuUsage[] = "max_cobalt_gpu_usage";
const char kMaxCobaltGpuUsageHelp[] =
"Specifies the maximum GPU usage of the cobalt.";
const char kOffscreenTargetCacheSizeInBytes[] =
"offscreen_target_cache_size_in_bytes";
const char kOffscreenTargetCacheSizeInBytesHelp[] =
"Determines the amount of GPU memory the offscreen target atlases will "
"use. This is specific to the direct-GLES rasterizer and caches any render "
"tree nodes which require skia for rendering. Two atlases will be "
"allocated from this memory or multiple atlases of the frame size if the "
"limit allows. It is recommended that enough memory be reserved for two "
"RGBA atlases about a quarter of the frame size.";
const char kOmitDeviceAuthenticationQueryParameters[] =
"omit_device_authentication_query_parameters";
const char kOmitDeviceAuthenticationQueryParametersHelp[] =
"When set, no device authentication parameters will be appended to the"
"initial URL.";
const char kProxy[] = "proxy";
const char kProxyHelp[] =
"Specifies a proxy to use for network connections. "
"See comments in net::ProxyRules::ParseFromString() for more information. "
"If you do not explicitly provide a scheme when providing the proxy server "
"URL, it will default to HTTP. So for example, for a HTTPS proxy you "
"would want to specify '--proxy=\"https=https://localhost:443\"' instead "
"of '--proxy=\"https=localhost:443\"'.";
const char kQrCodeOverlay[] = "qr_code_overlay";
const char kQrCodeOverlayHelp[] =
"Display QrCode based overlay information. These information can be used"
" for performance tuning or playback quality check. By default qr code"
" will be displayed in 4 different locations on the screen alternatively,"
" and the number of locations can be overwritten by specifying it as the "
" value of the command line parameter, like '--qr_code_overlay=6'.";
const char kRemoteTypefaceCacheSizeInBytes[] =
"remote_typeface_cache_size_in_bytes";
const char kRemoteTypefaceCacheSizeInBytesHelp[] =
"Determines the capacity of the remote typefaces cache which manages all "
"typefaces downloaded from a web page.";
const char kRetainRemoteTypefaceCacheDuringSuspend[] =
"retain_remote_typeface_cache_during_suspend";
const char kRetainRemoteTypefaceCacheDuringSuspendHelp[] =
"Causes the remote typeface cache to be retained when Cobalt is suspended,"
" so that they don't need to be re-downloaded when Cobalt is resumed.";
const char kScratchSurfaceCacheSizeInBytes[] =
"scratch_surface_cache_size_in_bytes";
const char kScratchSurfaceCacheSizeInBytesHelp[] =
"Determines the capacity of the scratch surface cache. The scratch surface"
" cache facilitates the reuse of temporary offscreen surfaces within a "
"single frame. This setting is only relevant when using the "
"hardware-accelerated Skia rasterizer. While it depends on the platform, "
"this setting may affect GPU memory usage.";
const char kSilenceInlineScriptWarnings[] = "silence_inline_script_warnings";
const char kSilenceInlineScriptWarningsHelp[] =
"Prevents Cobalt from logging warnings when it encounters a non-async "
"<script> tag inlined within HTML. Cobalt fails to deal with these "
"resources properly when suspending or resuming, so the warning usually "
"indicates a bug if the web app intends to support suspending and resuming "
"properly.";
const char kSkiaCacheSizeInBytes[] = "skia_cache_size_in_bytes";
const char kSkiaCacheSizeInBytesHelp[] =
"Determines the capacity of the skia cache. The Skia cache is maintained "
"within Skia and is used to cache the results of complicated effects such "
"as shadows, so that Skia draw calls that are used repeatedly across "
"frames can be cached into surfaces. This setting is only relevant when "
"using the hardware-accelerated Skia rasterizer. While it depends on "
"the platform, this setting may affect GPU memory usage.";
const char kSkiaTextureAtlasDimensions[] = "skia_atlas_texture_dimensions";
const char kSkiaTextureAtlasDimensionsHelp[] =
"Specifies the dimensions of the Skia caching texture atlases (e.g. "
"2048x2048).";
const char kFallbackSplashScreenURL[] = "fallback_splash_screen_url";
const char kFallbackSplashScreenURLHelp[] =
"Setting this switch defines the splash screen URL that Cobalt will "
"use in absence of a web cache. The referenced url should be a content "
"file (for example file:///foobar.html) or an embedded file "
"(for example h5vcc-embedded://foobar.html) and all files referenced must "
"be content or embedded files as well. If none is passed "
"(case-insensitive), no splash screen will be constructed. If "
"no value is set, the URL in the Cobalt configuration extension will be "
"used.";
const char kFallbackSplashScreenTopics[] = "fallback_splash_screen_topics";
const char kFallbackSplashScreenTopicsHelp[] =
"Setting this switch defines a mapping of URL 'topics' to splash screen "
"URLs or filenames that Cobalt will use in the absence of a web cache, "
"(for example, music=music_splash_screen.html&foo=file:///bar.html). If a "
"URL is given it should match the format of 'fallback_splash_screen_url'. "
"A given filename should exist in the same directory as "
"'fallback_splash_screen_url'. If no fallback url exists for the topic of "
"the URL used to launch Cobalt, then the value of "
"'fallback_splash_screen_url' will be used.";
const char kUpdateCheckDelaySeconds[] = "update_check_delay_seconds";
const char kUpdateCheckDelaySecondsHelp[] =
"Number of seconds to delay the first Cobalt Evergreen check for updates."
"The default value is 60 seconds.";
const char kUseCompressedUpdates[] = "use_compressed_updates";
const char kUseCompressedUpdatesHelp[] =
"Whether to request, download, and install compressed (rather than "
"uncompressed) Evergreen binaries.";
const char kUseQAUpdateServer[] = "use_qa_update_server";
const char kUseQAUpdateServerHelp[] =
"Uses the QA update server to test the changes to the configuration of the "
"PROD update server.";
const char kVersion[] = "version";
const char kVersionHelp[] = "Prints the current version of Cobalt";
const char kViewport[] = "viewport";
const char kViewportHelp[] =
"Specifies the viewport size: "
"width ['x' height ['x' screen_diagonal_inches]]";
const char kVideoPlaybackRateMultiplier[] = "video_playback_rate_multiplier";
const char kVideoPlaybackRateMultiplierHelp[] =
"Specifies the multiplier of video playback rate. Set to a value greater "
"than 1.0 to play video faster. Set to a value less than 1.0 to play "
"video slower.";
std::string HelpMessage() {
std::string help_message;
std::map<std::string, const char*> help_map {
#if defined(ENABLE_DEBUG_COMMAND_LINE_SWITCHES)
{kDebugConsoleMode, kDebugConsoleModeHelp},
{kDevServersListenIp, kDevServersListenIpHelp},
#if defined(ENABLE_DEBUGGER)
{kDisableWebDebugger, kDisableWebDebuggerHelp},
{kRemoteDebuggingPort, kRemoteDebuggingPortHelp},
{kWaitForWebDebugger, kWaitForWebDebuggerHelp},
#endif // ENABLE_DEBUGGER
{kDisableImageAnimations, kDisableImageAnimationsHelp},
{kForceDeterministicRendering, kForceDeterministicRenderingHelp},
{kDisableMediaCodecs, kDisableMediaCodecsHelp},
{kDisableMediaEncryptionSchemes, kDisableMediaEncryptionSchemesHelp},
{kDisableOnScreenKeyboard, kDisableOnScreenKeyboardHelp},
{kDisableRasterizerCaching, kDisableRasterizerCachingHelp},
{kDisableSignIn, kDisableSignInHelp},
{kDisableSplashScreenOnReloads, kDisableSplashScreenOnReloadsHelp},
{kDisableWebDriver, kDisableWebDriverHelp},
{kExtraWebFileDir, kExtraWebFileDirHelp},
{kFakeMicrophone, kFakeMicrophoneHelp},
{kIgnoreCertificateErrors, kIgnoreCertificateErrorsHelp},
{kInputFuzzer, kInputFuzzerHelp},
{kMinCompatibilityVersion, kMinCompatibilityVersionHelp},
{kNullSavegame, kNullSavegameHelp}, {kProd, kProdHelp},
{kRequireCSP, kRequireCSPHelp},
{kAllowAllCrossOrigin, kAllowAllCrossOriginHelp},
{kRequireHTTPSLocation, kRequireHTTPSLocationHelp},
{kShutdownAfter, kShutdownAfterHelp},
{kStubImageDecoder, kStubImageDecoderHelp},
{kSuspendFuzzer, kSuspendFuzzerHelp}, {kTimedTrace, kTimedTraceHelp},
{kUserAgent, kUserAgentHelp},
{kUserAgentClientHints, kUserAgentClientHintsHelp},
{kUserAgentOsNameVersion, kUserAgentOsNameVersionHelp},
{kUseTTS, kUseTTSHelp}, {kWatchdog, kWatchdogHelp},
{kWebDriverPort, kWebDriverPortHelp},
#endif // ENABLE_DEBUG_COMMAND_LINE_SWITCHES
{kDisableJavaScriptJit, kDisableJavaScriptJitHelp},
{kDisableMapToMesh, kDisableMapToMeshHelp},
{kDisableTimerResolutionLimit, kDisableTimerResolutionLimitHelp},
{kDisableUpdaterModule, kDisableUpdaterModuleHelp},
{kEncodedImageCacheSizeInBytes, kEncodedImageCacheSizeInBytesHelp},
{kForceMigrationForStoragePartitioning,
kForceMigrationForStoragePartitioningHelp},
{kFPSPrint, kFPSPrintHelp}, {kFPSOverlay, kFPSOverlayHelp},
{kHelp, kHelpHelp},
{kImageCacheSizeInBytes, kImageCacheSizeInBytesHelp},
{kInitialURL, kInitialURLHelp},
{kLocalStoragePartitionUrl, kLocalStoragePartitionUrlHelp},
{kMaxCobaltCpuUsage, kMaxCobaltCpuUsageHelp},
{kMaxCobaltGpuUsage, kMaxCobaltGpuUsageHelp},
{kMinLogLevel, kMinLogLevelHelp},
{kOffscreenTargetCacheSizeInBytes,
kOffscreenTargetCacheSizeInBytesHelp},
{kOmitDeviceAuthenticationQueryParameters,
kOmitDeviceAuthenticationQueryParametersHelp},
{kProxy, kProxyHelp}, {kQrCodeOverlay, kQrCodeOverlayHelp},
{kRemoteTypefaceCacheSizeInBytes, kRemoteTypefaceCacheSizeInBytesHelp},
{kRetainRemoteTypefaceCacheDuringSuspend,
kRetainRemoteTypefaceCacheDuringSuspendHelp},
{kScratchSurfaceCacheSizeInBytes, kScratchSurfaceCacheSizeInBytesHelp},
{kSilenceInlineScriptWarnings, kSilenceInlineScriptWarningsHelp},
{kSkiaCacheSizeInBytes, kSkiaCacheSizeInBytesHelp},
{kSkiaTextureAtlasDimensions, kSkiaTextureAtlasDimensionsHelp},
{kFallbackSplashScreenURL, kFallbackSplashScreenURLHelp},
{kUpdateCheckDelaySeconds, kUpdateCheckDelaySecondsHelp},
{kUseCompressedUpdates, kUseCompressedUpdatesHelp},
{kUseQAUpdateServer, kUseQAUpdateServerHelp}, {kVersion, kVersionHelp},
{kViewport, kViewportHelp},
{kVideoPlaybackRateMultiplier, kVideoPlaybackRateMultiplierHelp},
};
for (const auto& switch_message : help_map) {
help_message.append(" --")
.append(switch_message.first)
.append("\n")
.append(" ")
.append(switch_message.second)
.append("\n\n");
}
return help_message;
}
} // namespace switches
} // namespace browser
} // namespace cobalt