blob: 37444468c2370a71f1317a50ddaf3287e3e04969 [file] [log] [blame]
/*
* jdmerge.c
*
* Copyright (C) 1994-1996, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains code for merged upsampling/color conversion.
*
* This file combines functions from jdsample.c and jdcolor.c;
* read those files first to understand what's going on.
*
* When the chroma components are to be upsampled by simple replication
* (ie, box filtering), we can save some work in color conversion by
* calculating all the output pixels corresponding to a pair of chroma
* samples at one time. In the conversion equations
* R = Y + K1 * Cr
* G = Y + K2 * Cb + K3 * Cr
* B = Y + K4 * Cb
* only the Y term varies among the group of pixels corresponding to a pair
* of chroma samples, so the rest of the terms can be calculated just once.
* At typical sampling ratios, this eliminates half or three-quarters of the
* multiplications needed for color conversion.
*
* This file currently provides implementations for the following cases:
* YCbCr => RGB color conversion only.
* Sampling ratios of 2h1v or 2h2v.
* No scaling needed at upsample time.
* Corner-aligned (non-CCIR601) sampling alignment.
* Other special cases could be added, but in most applications these are
* the only common cases. (For uncommon cases we fall back on the more
* general code in jdsample.c and jdcolor.c.)
*/
#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
#ifdef UPSAMPLE_MERGING_SUPPORTED
/* Private subobject */
typedef struct {
struct jpeg_upsampler pub; /* public fields */
/* Pointer to routine to do actual upsampling/conversion of one row group */
JMETHOD(void, upmethod, (j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
JSAMPARRAY output_buf));
/* Private state for YCC->RGB conversion */
int * Cr_r_tab; /* => table for Cr to R conversion */
int * Cb_b_tab; /* => table for Cb to B conversion */
INT32 * Cr_g_tab; /* => table for Cr to G conversion */
INT32 * Cb_g_tab; /* => table for Cb to G conversion */
/* For 2:1 vertical sampling, we produce two output rows at a time.
* We need a "spare" row buffer to hold the second output row if the
* application provides just a one-row buffer; we also use the spare
* to discard the dummy last row if the image height is odd.
*/
JSAMPROW spare_row;
boolean spare_full; /* T if spare buffer is occupied */
JDIMENSION out_row_width; /* samples per output row */
JDIMENSION rows_to_go; /* counts rows remaining in image */
} my_upsampler;
typedef my_upsampler * my_upsample_ptr;
#define SCALEBITS 16 /* speediest right-shift on some machines */
#define ONE_HALF ((INT32) 1 << (SCALEBITS-1))
#define FIX(x) ((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
/*
* Initialize tables for YCC->RGB colorspace conversion.
* This is taken directly from jdcolor.c; see that file for more info.
*/
LOCAL(void)
build_ycc_rgb_table (j_decompress_ptr cinfo)
{
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
int i;
INT32 x;
SHIFT_TEMPS
upsample->Cr_r_tab = (int *)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
(MAXJSAMPLE+1) * SIZEOF(int));
upsample->Cb_b_tab = (int *)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
(MAXJSAMPLE+1) * SIZEOF(int));
upsample->Cr_g_tab = (INT32 *)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
(MAXJSAMPLE+1) * SIZEOF(INT32));
upsample->Cb_g_tab = (INT32 *)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
(MAXJSAMPLE+1) * SIZEOF(INT32));
for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
/* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
/* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
/* Cr=>R value is nearest int to 1.40200 * x */
upsample->Cr_r_tab[i] = (int)
RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
/* Cb=>B value is nearest int to 1.77200 * x */
upsample->Cb_b_tab[i] = (int)
RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
/* Cr=>G value is scaled-up -0.71414 * x */
upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x;
/* Cb=>G value is scaled-up -0.34414 * x */
/* We also add in ONE_HALF so that need not do it in inner loop */
upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
}
}
/*
* Initialize for an upsampling pass.
*/
METHODDEF(void)
start_pass_merged_upsample (j_decompress_ptr cinfo)
{
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
/* Mark the spare buffer empty */
upsample->spare_full = FALSE;
/* Initialize total-height counter for detecting bottom of image */
upsample->rows_to_go = cinfo->output_height;
}
/*
* Control routine to do upsampling (and color conversion).
*
* The control routine just handles the row buffering considerations.
*/
METHODDEF(void)
merged_2v_upsample (j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
JDIMENSION in_row_groups_avail,
JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
JDIMENSION out_rows_avail)
/* 2:1 vertical sampling case: may need a spare row. */
{
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
JSAMPROW work_ptrs[2];
JDIMENSION num_rows; /* number of rows returned to caller */
if (upsample->spare_full) {
/* If we have a spare row saved from a previous cycle, just return it. */
jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0,
1, upsample->out_row_width);
num_rows = 1;
upsample->spare_full = FALSE;
} else {
/* Figure number of rows to return to caller. */
num_rows = 2;
/* Not more than the distance to the end of the image. */
if (num_rows > upsample->rows_to_go)
num_rows = upsample->rows_to_go;
/* And not more than what the client can accept: */
out_rows_avail -= *out_row_ctr;
if (num_rows > out_rows_avail)
num_rows = out_rows_avail;
/* Create output pointer array for upsampler. */
work_ptrs[0] = output_buf[*out_row_ctr];
if (num_rows > 1) {
work_ptrs[1] = output_buf[*out_row_ctr + 1];
} else {
work_ptrs[1] = upsample->spare_row;
upsample->spare_full = TRUE;
}
/* Now do the upsampling. */
(*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs);
}
/* Adjust counts */
*out_row_ctr += num_rows;
upsample->rows_to_go -= num_rows;
/* When the buffer is emptied, declare this input row group consumed */
if (! upsample->spare_full)
(*in_row_group_ctr)++;
}
METHODDEF(void)
merged_1v_upsample (j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
JDIMENSION in_row_groups_avail,
JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
JDIMENSION out_rows_avail)
/* 1:1 vertical sampling case: much easier, never need a spare row. */
{
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
/* Just do the upsampling. */
(*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr,
output_buf + *out_row_ctr);
/* Adjust counts */
(*out_row_ctr)++;
(*in_row_group_ctr)++;
}
/*
* These are the routines invoked by the control routines to do
* the actual upsampling/conversion. One row group is processed per call.
*
* Note: since we may be writing directly into application-supplied buffers,
* we have to be honest about the output width; we can't assume the buffer
* has been rounded up to an even width.
*/
/*
* Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical.
*/
METHODDEF(void)
h2v1_merged_upsample (j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
JSAMPARRAY output_buf)
{
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
register int y, cred, cgreen, cblue;
int cb, cr;
register JSAMPROW outptr;
JSAMPROW inptr0, inptr1, inptr2;
JDIMENSION col;
/* copy these pointers into registers if possible */
register JSAMPLE * range_limit = cinfo->sample_range_limit;
int * Crrtab = upsample->Cr_r_tab;
int * Cbbtab = upsample->Cb_b_tab;
INT32 * Crgtab = upsample->Cr_g_tab;
INT32 * Cbgtab = upsample->Cb_g_tab;
SHIFT_TEMPS
inptr0 = input_buf[0][in_row_group_ctr];
inptr1 = input_buf[1][in_row_group_ctr];
inptr2 = input_buf[2][in_row_group_ctr];
outptr = output_buf[0];
/* Loop for each pair of output pixels */
for (col = cinfo->output_width >> 1; col > 0; col--) {
/* Do the chroma part of the calculation */
cb = GETJSAMPLE(*inptr1++);
cr = GETJSAMPLE(*inptr2++);
cred = Crrtab[cr];
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
cblue = Cbbtab[cb];
/* Fetch 2 Y values and emit 2 pixels */
y = GETJSAMPLE(*inptr0++);
outptr[RGB_RED] = range_limit[y + cred];
outptr[RGB_GREEN] = range_limit[y + cgreen];
outptr[RGB_BLUE] = range_limit[y + cblue];
outptr += RGB_PIXELSIZE;
y = GETJSAMPLE(*inptr0++);
outptr[RGB_RED] = range_limit[y + cred];
outptr[RGB_GREEN] = range_limit[y + cgreen];
outptr[RGB_BLUE] = range_limit[y + cblue];
outptr += RGB_PIXELSIZE;
}
/* If image width is odd, do the last output column separately */
if (cinfo->output_width & 1) {
cb = GETJSAMPLE(*inptr1);
cr = GETJSAMPLE(*inptr2);
cred = Crrtab[cr];
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
cblue = Cbbtab[cb];
y = GETJSAMPLE(*inptr0);
outptr[RGB_RED] = range_limit[y + cred];
outptr[RGB_GREEN] = range_limit[y + cgreen];
outptr[RGB_BLUE] = range_limit[y + cblue];
}
}
/*
* Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical.
*/
METHODDEF(void)
h2v2_merged_upsample (j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
JSAMPARRAY output_buf)
{
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
register int y, cred, cgreen, cblue;
int cb, cr;
register JSAMPROW outptr0, outptr1;
JSAMPROW inptr00, inptr01, inptr1, inptr2;
JDIMENSION col;
/* copy these pointers into registers if possible */
register JSAMPLE * range_limit = cinfo->sample_range_limit;
int * Crrtab = upsample->Cr_r_tab;
int * Cbbtab = upsample->Cb_b_tab;
INT32 * Crgtab = upsample->Cr_g_tab;
INT32 * Cbgtab = upsample->Cb_g_tab;
SHIFT_TEMPS
inptr00 = input_buf[0][in_row_group_ctr*2];
inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
inptr1 = input_buf[1][in_row_group_ctr];
inptr2 = input_buf[2][in_row_group_ctr];
outptr0 = output_buf[0];
outptr1 = output_buf[1];
/* Loop for each group of output pixels */
for (col = cinfo->output_width >> 1; col > 0; col--) {
/* Do the chroma part of the calculation */
cb = GETJSAMPLE(*inptr1++);
cr = GETJSAMPLE(*inptr2++);
cred = Crrtab[cr];
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
cblue = Cbbtab[cb];
/* Fetch 4 Y values and emit 4 pixels */
y = GETJSAMPLE(*inptr00++);
outptr0[RGB_RED] = range_limit[y + cred];
outptr0[RGB_GREEN] = range_limit[y + cgreen];
outptr0[RGB_BLUE] = range_limit[y + cblue];
outptr0 += RGB_PIXELSIZE;
y = GETJSAMPLE(*inptr00++);
outptr0[RGB_RED] = range_limit[y + cred];
outptr0[RGB_GREEN] = range_limit[y + cgreen];
outptr0[RGB_BLUE] = range_limit[y + cblue];
outptr0 += RGB_PIXELSIZE;
y = GETJSAMPLE(*inptr01++);
outptr1[RGB_RED] = range_limit[y + cred];
outptr1[RGB_GREEN] = range_limit[y + cgreen];
outptr1[RGB_BLUE] = range_limit[y + cblue];
outptr1 += RGB_PIXELSIZE;
y = GETJSAMPLE(*inptr01++);
outptr1[RGB_RED] = range_limit[y + cred];
outptr1[RGB_GREEN] = range_limit[y + cgreen];
outptr1[RGB_BLUE] = range_limit[y + cblue];
outptr1 += RGB_PIXELSIZE;
}
/* If image width is odd, do the last output column separately */
if (cinfo->output_width & 1) {
cb = GETJSAMPLE(*inptr1);
cr = GETJSAMPLE(*inptr2);
cred = Crrtab[cr];
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
cblue = Cbbtab[cb];
y = GETJSAMPLE(*inptr00);
outptr0[RGB_RED] = range_limit[y + cred];
outptr0[RGB_GREEN] = range_limit[y + cgreen];
outptr0[RGB_BLUE] = range_limit[y + cblue];
y = GETJSAMPLE(*inptr01);
outptr1[RGB_RED] = range_limit[y + cred];
outptr1[RGB_GREEN] = range_limit[y + cgreen];
outptr1[RGB_BLUE] = range_limit[y + cblue];
}
}
/*
* Module initialization routine for merged upsampling/color conversion.
*
* NB: this is called under the conditions determined by use_merged_upsample()
* in jdmaster.c. That routine MUST correspond to the actual capabilities
* of this module; no safety checks are made here.
*/
GLOBAL(void)
jinit_merged_upsampler (j_decompress_ptr cinfo)
{
my_upsample_ptr upsample;
upsample = (my_upsample_ptr)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
SIZEOF(my_upsampler));
cinfo->upsample = (struct jpeg_upsampler *) upsample;
upsample->pub.start_pass = start_pass_merged_upsample;
upsample->pub.need_context_rows = FALSE;
upsample->out_row_width = cinfo->output_width * cinfo->out_color_components;
if (cinfo->max_v_samp_factor == 2) {
upsample->pub.upsample = merged_2v_upsample;
upsample->upmethod = h2v2_merged_upsample;
/* Allocate a spare row buffer */
upsample->spare_row = (JSAMPROW)
(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
(size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
} else {
upsample->pub.upsample = merged_1v_upsample;
upsample->upmethod = h2v1_merged_upsample;
/* No spare row needed */
upsample->spare_row = NULL;
}
build_ycc_rgb_table(cinfo);
}
#endif /* UPSAMPLE_MERGING_SUPPORTED */