| # NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py |
| # RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=btver2 -timeline -timeline-max-iterations=3 -iterations=1500 < %s | FileCheck %s |
| |
| # perf stat reports an IPC of 2.00 for this block of code. |
| |
| # All of the vector packed compares from this test are zero idioms. These zero |
| # idioms are all detected and removed by the register renamer. That means, no |
| # uOp is executed, and there is no RAW dependency for any of the packed |
| # compares. |
| |
| vpcmpgtb %xmm0, %xmm0, %xmm1 |
| vpcmpgtw %xmm1, %xmm1, %xmm2 |
| vpcmpgtd %xmm2, %xmm2, %xmm3 |
| vpcmpgtq %xmm3, %xmm3, %xmm0 |
| |
| # CHECK: Iterations: 1500 |
| # CHECK-NEXT: Instructions: 6000 |
| # CHECK-NEXT: Total Cycles: 3001 |
| # CHECK-NEXT: Dispatch Width: 2 |
| # CHECK-NEXT: IPC: 2.00 |
| # CHECK-NEXT: Block RThroughput: 2.0 |
| |
| # CHECK: Instruction Info: |
| # CHECK-NEXT: [1]: #uOps |
| # CHECK-NEXT: [2]: Latency |
| # CHECK-NEXT: [3]: RThroughput |
| # CHECK-NEXT: [4]: MayLoad |
| # CHECK-NEXT: [5]: MayStore |
| # CHECK-NEXT: [6]: HasSideEffects (U) |
| |
| # CHECK: [1] [2] [3] [4] [5] [6] Instructions: |
| # CHECK-NEXT: 1 0 0.50 vpcmpgtb %xmm0, %xmm0, %xmm1 |
| # CHECK-NEXT: 1 0 0.50 vpcmpgtw %xmm1, %xmm1, %xmm2 |
| # CHECK-NEXT: 1 0 0.50 vpcmpgtd %xmm2, %xmm2, %xmm3 |
| # CHECK-NEXT: 1 0 0.50 vpcmpgtq %xmm3, %xmm3, %xmm0 |
| |
| # CHECK: Resources: |
| # CHECK-NEXT: [0] - JALU0 |
| # CHECK-NEXT: [1] - JALU1 |
| # CHECK-NEXT: [2] - JDiv |
| # CHECK-NEXT: [3] - JFPA |
| # CHECK-NEXT: [4] - JFPM |
| # CHECK-NEXT: [5] - JFPU0 |
| # CHECK-NEXT: [6] - JFPU1 |
| # CHECK-NEXT: [7] - JLAGU |
| # CHECK-NEXT: [8] - JMul |
| # CHECK-NEXT: [9] - JSAGU |
| # CHECK-NEXT: [10] - JSTC |
| # CHECK-NEXT: [11] - JVALU0 |
| # CHECK-NEXT: [12] - JVALU1 |
| # CHECK-NEXT: [13] - JVIMUL |
| |
| # CHECK: Resource pressure per iteration: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] |
| # CHECK-NEXT: - - - - - - - - - - - - - - |
| |
| # CHECK: Resource pressure by instruction: |
| # CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] Instructions: |
| # CHECK-NEXT: - - - - - - - - - - - - - - vpcmpgtb %xmm0, %xmm0, %xmm1 |
| # CHECK-NEXT: - - - - - - - - - - - - - - vpcmpgtw %xmm1, %xmm1, %xmm2 |
| # CHECK-NEXT: - - - - - - - - - - - - - - vpcmpgtd %xmm2, %xmm2, %xmm3 |
| # CHECK-NEXT: - - - - - - - - - - - - - - vpcmpgtq %xmm3, %xmm3, %xmm0 |
| |
| # CHECK: Timeline view: |
| # CHECK-NEXT: Index 0123456 |
| |
| # CHECK: [0,0] DR .. vpcmpgtb %xmm0, %xmm0, %xmm1 |
| # CHECK-NEXT: [0,1] DR .. vpcmpgtw %xmm1, %xmm1, %xmm2 |
| # CHECK-NEXT: [0,2] .DR .. vpcmpgtd %xmm2, %xmm2, %xmm3 |
| # CHECK-NEXT: [0,3] .DR .. vpcmpgtq %xmm3, %xmm3, %xmm0 |
| # CHECK-NEXT: [1,0] . DR .. vpcmpgtb %xmm0, %xmm0, %xmm1 |
| # CHECK-NEXT: [1,1] . DR .. vpcmpgtw %xmm1, %xmm1, %xmm2 |
| # CHECK-NEXT: [1,2] . DR.. vpcmpgtd %xmm2, %xmm2, %xmm3 |
| # CHECK-NEXT: [1,3] . DR.. vpcmpgtq %xmm3, %xmm3, %xmm0 |
| # CHECK-NEXT: [2,0] . DR. vpcmpgtb %xmm0, %xmm0, %xmm1 |
| # CHECK-NEXT: [2,1] . DR. vpcmpgtw %xmm1, %xmm1, %xmm2 |
| # CHECK-NEXT: [2,2] . DR vpcmpgtd %xmm2, %xmm2, %xmm3 |
| # CHECK-NEXT: [2,3] . DR vpcmpgtq %xmm3, %xmm3, %xmm0 |
| |
| # CHECK: Average Wait times (based on the timeline view): |
| # CHECK-NEXT: [0]: Executions |
| # CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue |
| # CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready |
| # CHECK-NEXT: [3]: Average time elapsed from WB until retire stage |
| |
| # CHECK: [0] [1] [2] [3] |
| # CHECK-NEXT: 0. 3 0.0 0.0 0.0 vpcmpgtb %xmm0, %xmm0, %xmm1 |
| # CHECK-NEXT: 1. 3 0.0 0.0 0.0 vpcmpgtw %xmm1, %xmm1, %xmm2 |
| # CHECK-NEXT: 2. 3 0.0 0.0 0.0 vpcmpgtd %xmm2, %xmm2, %xmm3 |
| # CHECK-NEXT: 3. 3 0.0 0.0 0.0 vpcmpgtq %xmm3, %xmm3, %xmm0 |
