blob: 11efefa7241371aa9030a3c23a82f4a7c47e8936 [file] [log] [blame]
// Copyright 2019 The Cobalt Authors. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// Module Overview: User Interface Navigation module
//
// API to allow applications to take advantage of the platform's native UI
// engine. This is mainly to drive the animation of visual elements and to
// signal which of those elements have focus. The implementation should not
// render any visual elements; instead, it will be used to guide the app in
// where these elements should be drawn.
//
// When the application creates the user interface, it will create SbUiNavItems
// for interactable elements. Additionally, the app must specify the position
// and size of these navigation items. As the app's user interface changes, it
// will create and destroy navigation items as appropriate.
//
// For each render frame, the app will query the local transform for each
// SbUiNavItem in case the native UI engine moves individual items in response
// to user interaction. If the navigation item is a container, then the content
// offset will also be queried to determine the placement of its content items.
#ifndef STARBOARD_UI_NAVIGATION_H_
#define STARBOARD_UI_NAVIGATION_H_
#include "starboard/configuration.h"
#include "starboard/export.h"
#include "starboard/types.h"
#include "starboard/window.h"
#if SB_API_VERSION >= 12
#ifdef __cplusplus
extern "C" {
#endif
// --- Types -----------------------------------------------------------------
// An opaque handle to an implementation-private structure representing a
// navigation item.
typedef struct SbUiNavItemPrivate* SbUiNavItem;
// Navigation items may be one of the following types. This must be specified
// upon item creation and may not change during the item's lifespan.
typedef enum SbUiNavItemType {
// This is a single focusable item.
kSbUiNavItemTypeFocus,
// This is a container of navigation items which can also be containers
// themselves or focusable items. Containers themselves cannot be focused.
kSbUiNavItemTypeContainer,
} SbUiNavItemType;
// Navigation items of type kSbUiNavItemTypeContainer have directionality. If
// directionality is not specified for a container, it should default to
// left-to-right and top-to-bottom.
//
// For left-to-right, content offset x = 0 shows the leftmost content.
// |<--Container Size-->|
// +--------------------+--------------------+--------------------+
// | Not selectable. | Selectable. | Selectable. |
// | Offscreen. | Onscreen. | Offscreen. |
// | Negative position. | Positive position. | Positive position. |
// +--------------------+--------------------+--------------------+
// ^
// Content Offset X = 0.
//
// For right-to-left, content offset x = 0 shows the rightmost content.
// |<--Container Size-->|
// +--------------------+--------------------+--------------------+
// | Selectable. | Selectable. | Not selectable. |
// | Offscreen. | Onscreen. | Offscreen. |
// | Negative position. | Positive position. | Positive position. |
// +--------------------+--------------------+--------------------+
// ^
// Content Offset X = 0.
//
// Top-to-bottom is similar to left-to-right, but for the Y position.
// Bottom-to-top is similar to right-to-left, but for the Y position.
typedef struct SbUiNavItemDir {
bool is_left_to_right;
bool is_top_to_bottom;
} SbUiNavItemDir;
// This represents a 2x3 transform matrix in row-major order.
// | a b tx |
// | c d ty |
typedef struct SbUiNavMatrix2x3 {
float m[6];
} SbUiNavMatrix2x3;
// This represents a 4x4 transform matrix in row-major order.
typedef struct SbUiNavMatrix4 {
float m[16];
} SbUiNavMatrix4;
// This structure specifies all the callbacks which the platform UI engine
// should invoke for various interaction events on navigation items. These
// callbacks may be invoked from any thread at any frequency. The
// |callback_context| is the value that was passed on creation of the
// relevant SbUiNavItem.
typedef struct SbUiNavCallbacks {
// Invoke when an item has lost focus. This is only used with focus items.
void (*onblur)(SbUiNavItem item, void* callback_context);
// Invoke when an item has gained focus. This is only used with focus items.
void (*onfocus)(SbUiNavItem item, void* callback_context);
// Invoke when an item's content offset is changed. This is only used with
// container items.
void (*onscroll)(SbUiNavItem item, void* callback_context);
} SbUiNavCallbacks;
// This structure declares the interface to the UI navigation implementation.
// All function pointers must be specified if the platform supports UI
// navigation.
typedef struct SbUiNavInterface {
// Create a new navigation item. When the user interacts with this item
// the appropriate SbUiNavCallbacks function will be invoked with the
// provided |callback_context|. An item is not interactable until it is
// enabled.
SbUiNavItem (*create_item)(SbUiNavItemType type,
const SbUiNavCallbacks* callbacks,
void* callback_context);
// Destroy the given navigation item. If this is a content of another item,
// then it will first be unregistered. Additionally, if this item contains
// other items, then those will be unregistered as well, but they will not
// be automatically destroyed.
void (*destroy_item)(SbUiNavItem item);
// This is used to manually force focus on a navigation item of type
// kSbUiNavItemTypeFocus. Any previously focused navigation item should
// receive the blur event. If the item is not transitively a content of the
// root item, then this does nothing.
#if SB_API_VERSION >= SB_UI_NAVIGATION2_VERSION
//
// Specifying kSbUiNavItemInvalid should remove focus from the UI navigation
// system.
#endif
void (*set_focus)(SbUiNavItem item);
// This is used to enable or disable user interaction with the specified
// navigation item. All navigation items are disabled when created, and
// they must be explicitly enabled to allow user interaction. If a container
// is disabled, then all of its contents are not interactable even though
// they remain enabled. If |enabled| is false, it must be guaranteed that
// once this function returns, no callbacks associated with this item will
// be invoked until the item is re-enabled.
void (*set_item_enabled)(SbUiNavItem item, bool enabled);
// This specifies directionality for container items. Containers within
// containers do not inherit directionality. Directionality must be specified
// for each container explicitly.
#if SB_API_VERSION >= SB_UI_NAVIGATION2_VERSION
//
// This should work even if |item| is disabled.
#endif
void (*set_item_dir)(SbUiNavItem item, SbUiNavItemDir dir);
// Set the interactable size of the specified navigation item. By default,
// an item's size is (0,0).
void (*set_item_size)(SbUiNavItem item, float width, float height);
// Set the transform for the navigation item and its contents if the item is
// a container. This specifies the placement of the item's center within its
// container. The transform origin is the center of the item. Distance is
// measured in pixels with the origin being the top-left of the item's
// container. By default, an item's transform is identity.
void (*set_item_transform)(SbUiNavItem item,
const SbUiNavMatrix2x3* transform);
// Retrieve the focus transform matrix for the navigation item. The UI
// engine may translate, rotate, and/or tilt focus items to reflect user
// interaction. This transform should be multiplied with the item's transform
// to get its position inside its container. The transform origin is the
// center of the item. Return false if the item position should not be
// changed (i.e. the transform should be treated as identity).
bool (*get_item_focus_transform)(SbUiNavItem item,
SbUiNavMatrix4* out_transform);
// Retrieve a vector representing the focus location within a focused item.
// This is used to provide feedback about user input that is too small to
// result in a focus change. If there is no focus vector for the navigation
// item, then return false and leave |out_x| and |out_y| unchanged. Otherwise,
// return true and set the output values in the range of [-1, +1] with
// (out_x, out_y) of (-1, -1) being the top-left corner of the navigation
// item and (0, 0) being the center.
bool (*get_item_focus_vector)(SbUiNavItem item, float* out_x, float* out_y);
// This attaches the given navigation item (which must be a container) to
// the specified window. Navigation items are only interactable if they are
// transitively attached to a window.
//
#if SB_API_VERSION >= SB_UI_NAVIGATION2_VERSION
// The native UI engine should never change this navigation item's content
// offset. It is assumed to be used as a proxy for the system window.
//
#endif
// A navigation item may only have a SbUiNavItem or SbWindow as its direct
// container. The navigation item hierarchy is established using
// set_item_container_item() with the root container attached to a SbWindow
// using set_item_container_window() to enable interaction with all enabled
// items in the hierarchy.
//
// If |item| is already registered with a different window, then this will
// unregister it from that window then attach it to the given |window|. It
// is an error to register more than one navigation item with any given
// window. If |window| is kSbWindowInvalid, then this will unregister the
// |item| from its current window if any. Upon destruction of |item| or
// |window|, the |item| is automatically unregistered from the |window|.
void (*set_item_container_window)(SbUiNavItem item, SbWindow window);
// A container navigation item may contain other navigation items. However,
// it is an error to have circular containment or for |container| to not
// be of type kSbUiNavItemTypeContainer. If |item| already has a different
// container, then this first severs that connection. If |container| is
// kSbUiNavItemInvalid, then this removes |item| from its current container.
// Upon destruction of |item| or |container|, the |item| is automatically
// removed from the |container|.
//
// The position of items within a container are specified relative to the
// container's position. The position of these content items are further
// modified by the container's "content offset".
//
// For example, consider item A with position (5,5) and content offset (0,0).
// Given item B with position (10,10) is registered as a content of item A.
// 1. Item B should be drawn at position (15,15).
// 2. If item A's content offset is changed to (10,0), then item B should be
// drawn at position (5,15).
//
// Essentially, content items should be drawn at:
// [container position] + [content position] - [container content offset]
#if SB_API_VERSION >= SB_UI_NAVIGATION2_VERSION
//
// Content items may overlap within a container. This can cause obscured items
// to be unfocusable. The only rule that needs to be followed is that contents
// which are focus items can obscure other contents which are containers, but
// not vice versa. The caller must ensure that content focus items do not
// overlap other content focus items and content container items do not
// overlap other content container items.
#endif
void (*set_item_container_item)(SbUiNavItem item, SbUiNavItem container);
// Set the current content offset for the given container. This may be used
// to force scrolling to make certain content items visible. A container
// item's content offset helps determine where its content items should be
// drawn. Essentially, a content item should be drawn at:
// [container position] + [content position] - [container content offset]
// If |item| is not a container, then this does nothing.
// By default, the content offset is (0,0).
#if SB_API_VERSION >= SB_UI_NAVIGATION2_VERSION
//
// This should update the values returned by get_item_content_offset() even
// if the |item| is disabled.
#endif
void (*set_item_content_offset)(SbUiNavItem item,
float content_offset_x,
float content_offset_y);
// Retrieve the current content offset for the navigation item. If |item| is
// not a container, then the content offset is (0,0).
#if SB_API_VERSION >= SB_UI_NAVIGATION2_VERSION
//
// The native UI engine should not change the content offset of a container
// unless one of its contents (possibly recursively) is focused. This is to
// allow seemlessly disabling then re-enabling focus items without having
// their containers change offsets.
#endif
void (*get_item_content_offset)(SbUiNavItem item,
float* out_content_offset_x,
float* out_content_offset_y);
#if SB_API_VERSION >= SB_UI_NAVIGATION2_VERSION
// Call |update_function| with |context| to perform a series of UI navigation
// changes atomically before returning.
void (*do_batch_update)(void (*update_function)(void*), void* context);
#endif
} SbUiNavInterface;
// --- Constants -------------------------------------------------------------
// Well-defined value for an invalid navigation item.
#define kSbUiNavItemInvalid ((SbUiNavItem)NULL)
// --- Functions -------------------------------------------------------------
// Returns whether the given navigation item handle is valid.
static SB_C_INLINE bool SbUiNavItemIsValid(SbUiNavItem item) {
return item != kSbUiNavItemInvalid;
}
// Retrieve the platform's UI navigation implementation. If the platform does
// not provide one, then return false without modifying |out_interface|.
// Otherwise, initialize all members of |out_interface| and return true.
SB_EXPORT bool SbUiNavGetInterface(SbUiNavInterface* out_interface);
#ifdef __cplusplus
} // extern "C"
#endif
#endif // SB_API_VERSION >= 12
#endif // STARBOARD_UI_NAVIGATION_H_