/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
 * vim: set ts=8 sts=4 et sw=4 tw=99:
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "vm/NativeObject-inl.h"

#include "mozilla/ArrayUtils.h"
#include "mozilla/Casting.h"

#include "jswatchpoint.h"

#include "gc/Marking.h"
#include "js/Value.h"
#include "vm/Debugger.h"
#include "vm/TypedArrayCommon.h"

#include "jsobjinlines.h"

#include "gc/Nursery-inl.h"
#include "vm/ArrayObject-inl.h"
#include "vm/ScopeObject-inl.h"
#include "vm/Shape-inl.h"

using namespace js;

using JS::GenericNaN;
using mozilla::ArrayLength;
using mozilla::DebugOnly;
using mozilla::PodCopy;
using mozilla::RoundUpPow2;

static const ObjectElements emptyElementsHeader(0, 0);

/* Objects with no elements share one empty set of elements. */
HeapSlot* const js::emptyObjectElements =
    reinterpret_cast<HeapSlot*>(uintptr_t(&emptyElementsHeader) + sizeof(ObjectElements));

static const ObjectElements emptyElementsHeaderShared(0, 0, ObjectElements::SharedMemory::IsShared);

/* Objects with no elements share one empty set of elements. */
HeapSlot* const js::emptyObjectElementsShared =
    reinterpret_cast<HeapSlot*>(uintptr_t(&emptyElementsHeaderShared) + sizeof(ObjectElements));


#ifdef DEBUG

bool
NativeObject::canHaveNonEmptyElements()
{
    return !IsAnyTypedArray(this);
}

#endif // DEBUG

/* static */ bool
ObjectElements::ConvertElementsToDoubles(JSContext* cx, uintptr_t elementsPtr)
{
    /*
     * This function is infallible, but has a fallible interface so that it can
     * be called directly from Ion code. Only arrays can have their dense
     * elements converted to doubles, and arrays never have empty elements.
     */
    HeapSlot* elementsHeapPtr = (HeapSlot*) elementsPtr;
    MOZ_ASSERT(elementsHeapPtr != emptyObjectElements &&
               elementsHeapPtr != emptyObjectElementsShared);

    ObjectElements* header = ObjectElements::fromElements(elementsHeapPtr);
    MOZ_ASSERT(!header->shouldConvertDoubleElements());

    // Note: the elements can be mutated in place even for copy on write
    // arrays. See comment on ObjectElements.
    Value* vp = (Value*) elementsPtr;
    for (size_t i = 0; i < header->initializedLength; i++) {
        if (vp[i].isInt32())
            vp[i].setDouble(vp[i].toInt32());
    }

    header->setShouldConvertDoubleElements();
    return true;
}

/* static */ bool
ObjectElements::MakeElementsCopyOnWrite(ExclusiveContext* cx, NativeObject* obj)
{
    static_assert(sizeof(HeapSlot) >= sizeof(HeapPtrObject),
                  "there must be enough room for the owner object pointer at "
                  "the end of the elements");
    if (!obj->ensureElements(cx, obj->getDenseInitializedLength() + 1))
        return false;

    ObjectElements* header = obj->getElementsHeader();

    // Note: this method doesn't update type information to indicate that the
    // elements might be copy on write. Handling this is left to the caller.
    MOZ_ASSERT(!header->isCopyOnWrite());
    header->flags |= COPY_ON_WRITE;

    header->ownerObject().init(obj);
    return true;
}

#ifdef DEBUG
void
js::NativeObject::checkShapeConsistency()
{
    static int throttle = -1;
    if (throttle < 0) {
        if (const char* var = js_sb_getenv("JS_CHECK_SHAPE_THROTTLE"))
            throttle = atoi(var);
        if (throttle < 0)
            throttle = 0;
    }
    if (throttle == 0)
        return;

    MOZ_ASSERT(isNative());

    Shape* shape = lastProperty();
    Shape* prev = nullptr;

    if (inDictionaryMode()) {
        MOZ_ASSERT(shape->hasTable());

        ShapeTable& table = shape->table();
        for (uint32_t fslot = table.freeList();
             fslot != SHAPE_INVALID_SLOT;
             fslot = getSlot(fslot).toPrivateUint32())
        {
            MOZ_ASSERT(fslot < slotSpan());
        }

        for (int n = throttle; --n >= 0 && shape->parent; shape = shape->parent) {
            MOZ_ASSERT_IF(lastProperty() != shape, !shape->hasTable());

            ShapeTable::Entry& entry = table.search(shape->propid());
            MOZ_ASSERT(entry.shape() == shape);
        }

        shape = lastProperty();
        for (int n = throttle; --n >= 0 && shape; shape = shape->parent) {
            MOZ_ASSERT_IF(shape->slot() != SHAPE_INVALID_SLOT, shape->slot() < slotSpan());
            if (!prev) {
                MOZ_ASSERT(lastProperty() == shape);
                MOZ_ASSERT(shape->listp == &shape_);
            } else {
                MOZ_ASSERT(shape->listp == &prev->parent);
            }
            prev = shape;
        }
    } else {
        for (int n = throttle; --n >= 0 && shape->parent; shape = shape->parent) {
            if (shape->hasTable()) {
                ShapeTable& table = shape->table();
                MOZ_ASSERT(shape->parent);
                for (Shape::Range<NoGC> r(shape); !r.empty(); r.popFront()) {
                    ShapeTable::Entry& entry = table.search(r.front().propid());
                    MOZ_ASSERT(entry.shape() == &r.front());
                }
            }
            if (prev) {
                MOZ_ASSERT(prev->maybeSlot() >= shape->maybeSlot());
                shape->kids.checkConsistency(prev);
            }
            prev = shape;
        }
    }
}
#endif

void
js::NativeObject::initializeSlotRange(uint32_t start, uint32_t length)
{
    /*
     * No bounds check, as this is used when the object's shape does not
     * reflect its allocated slots (updateSlotsForSpan).
     */
    HeapSlot* fixedStart;
    HeapSlot* fixedEnd;
    HeapSlot* slotsStart;
    HeapSlot* slotsEnd;
    getSlotRangeUnchecked(start, length, &fixedStart, &fixedEnd, &slotsStart, &slotsEnd);

    uint32_t offset = start;
    for (HeapSlot* sp = fixedStart; sp < fixedEnd; sp++)
        sp->init(this, HeapSlot::Slot, offset++, UndefinedValue());
    for (HeapSlot* sp = slotsStart; sp < slotsEnd; sp++)
        sp->init(this, HeapSlot::Slot, offset++, UndefinedValue());
}

void
js::NativeObject::initSlotRange(uint32_t start, const Value* vector, uint32_t length)
{
    HeapSlot* fixedStart;
    HeapSlot* fixedEnd;
    HeapSlot* slotsStart;
    HeapSlot* slotsEnd;
    getSlotRange(start, length, &fixedStart, &fixedEnd, &slotsStart, &slotsEnd);
    for (HeapSlot* sp = fixedStart; sp < fixedEnd; sp++)
        sp->init(this, HeapSlot::Slot, start++, *vector++);
    for (HeapSlot* sp = slotsStart; sp < slotsEnd; sp++)
        sp->init(this, HeapSlot::Slot, start++, *vector++);
}

void
js::NativeObject::copySlotRange(uint32_t start, const Value* vector, uint32_t length)
{
    HeapSlot* fixedStart;
    HeapSlot* fixedEnd;
    HeapSlot* slotsStart;
    HeapSlot* slotsEnd;
    getSlotRange(start, length, &fixedStart, &fixedEnd, &slotsStart, &slotsEnd);
    for (HeapSlot* sp = fixedStart; sp < fixedEnd; sp++)
        sp->set(this, HeapSlot::Slot, start++, *vector++);
    for (HeapSlot* sp = slotsStart; sp < slotsEnd; sp++)
        sp->set(this, HeapSlot::Slot, start++, *vector++);
}

#ifdef DEBUG
bool
js::NativeObject::slotInRange(uint32_t slot, SentinelAllowed sentinel) const
{
    uint32_t capacity = numFixedSlots() + numDynamicSlots();
    if (sentinel == SENTINEL_ALLOWED)
        return slot <= capacity;
    return slot < capacity;
}
#endif /* DEBUG */

Shape*
js::NativeObject::lookup(ExclusiveContext* cx, jsid id)
{
    MOZ_ASSERT(isNative());
    ShapeTable::Entry* entry;
    return Shape::search(cx, lastProperty(), id, &entry);
}

Shape*
js::NativeObject::lookupPure(jsid id)
{
    MOZ_ASSERT(isNative());
    return Shape::searchNoHashify(lastProperty(), id);
}

uint32_t
js::NativeObject::dynamicSlotsCount(uint32_t nfixed, uint32_t span, const Class* clasp)
{
    if (span <= nfixed)
        return 0;
    span -= nfixed;

    // Increase the slots to SLOT_CAPACITY_MIN to decrease the likelihood
    // the dynamic slots need to get increased again. ArrayObjects ignore
    // this because slots are uncommon in that case.
    if (clasp != &ArrayObject::class_ && span <= SLOT_CAPACITY_MIN)
        return SLOT_CAPACITY_MIN;

    uint32_t slots = mozilla::RoundUpPow2(span);
    MOZ_ASSERT(slots >= span);
    return slots;
}

inline bool
NativeObject::updateSlotsForSpan(ExclusiveContext* cx, size_t oldSpan, size_t newSpan)
{
    MOZ_ASSERT(oldSpan != newSpan);

    size_t oldCount = dynamicSlotsCount(numFixedSlots(), oldSpan, getClass());
    size_t newCount = dynamicSlotsCount(numFixedSlots(), newSpan, getClass());

    if (oldSpan < newSpan) {
        if (oldCount < newCount && !growSlots(cx, oldCount, newCount))
            return false;

        if (newSpan == oldSpan + 1)
            initSlotUnchecked(oldSpan, UndefinedValue());
        else
            initializeSlotRange(oldSpan, newSpan - oldSpan);
    } else {
        /* Trigger write barriers on the old slots before reallocating. */
        prepareSlotRangeForOverwrite(newSpan, oldSpan);
        invalidateSlotRange(newSpan, oldSpan - newSpan);

        if (oldCount > newCount)
            shrinkSlots(cx, oldCount, newCount);
    }

    return true;
}

bool
NativeObject::setLastProperty(ExclusiveContext* cx, Shape* shape)
{
    MOZ_ASSERT(!inDictionaryMode());
    MOZ_ASSERT(!shape->inDictionary());
    MOZ_ASSERT(shape->compartment() == compartment());
    MOZ_ASSERT(shape->numFixedSlots() == numFixedSlots());
    MOZ_ASSERT(shape->getObjectClass() == getClass());

    size_t oldSpan = lastProperty()->slotSpan();
    size_t newSpan = shape->slotSpan();

    if (oldSpan == newSpan) {
        shape_ = shape;
        return true;
    }

    if (!updateSlotsForSpan(cx, oldSpan, newSpan))
        return false;

    shape_ = shape;
    return true;
}

void
NativeObject::setLastPropertyShrinkFixedSlots(Shape* shape)
{
    MOZ_ASSERT(!inDictionaryMode());
    MOZ_ASSERT(!shape->inDictionary());
    MOZ_ASSERT(shape->compartment() == compartment());
    MOZ_ASSERT(lastProperty()->slotSpan() == shape->slotSpan());
    MOZ_ASSERT(shape->getObjectClass() == getClass());

    DebugOnly<size_t> oldFixed = numFixedSlots();
    DebugOnly<size_t> newFixed = shape->numFixedSlots();
    MOZ_ASSERT(newFixed < oldFixed);
    MOZ_ASSERT(shape->slotSpan() <= oldFixed);
    MOZ_ASSERT(shape->slotSpan() <= newFixed);
    MOZ_ASSERT(dynamicSlotsCount(oldFixed, shape->slotSpan(), getClass()) == 0);
    MOZ_ASSERT(dynamicSlotsCount(newFixed, shape->slotSpan(), getClass()) == 0);

    shape_ = shape;
}

void
NativeObject::setLastPropertyMakeNonNative(Shape* shape)
{
    MOZ_ASSERT(!inDictionaryMode());
    MOZ_ASSERT(!shape->getObjectClass()->isNative());
    MOZ_ASSERT(shape->compartment() == compartment());
    MOZ_ASSERT(shape->slotSpan() == 0);
    MOZ_ASSERT(shape->numFixedSlots() == 0);

    if (hasDynamicElements())
        js_free(getElementsHeader());
    if (hasDynamicSlots()) {
        js_free(slots_);
        slots_ = nullptr;
    }

    shape_ = shape;
}

void
NativeObject::setLastPropertyMakeNative(ExclusiveContext* cx, Shape* shape)
{
    MOZ_ASSERT(getClass()->isNative());
    MOZ_ASSERT(shape->isNative());
    MOZ_ASSERT(!shape->inDictionary());

    // This method is used to convert unboxed objects into native objects. In
    // this case, the shape_ field was previously used to store other data and
    // this should be treated as an initialization.
    shape_.init(shape);

    slots_ = nullptr;
    elements_ = emptyObjectElements;

    size_t oldSpan = shape->numFixedSlots();
    size_t newSpan = shape->slotSpan();

    initializeSlotRange(0, oldSpan);

    // A failure at this point will leave the object as a mutant, and we
    // can't recover.
    AutoEnterOOMUnsafeRegion oomUnsafe;
    if (oldSpan != newSpan && !updateSlotsForSpan(cx, oldSpan, newSpan))
        oomUnsafe.crash("NativeObject::setLastPropertyMakeNative");
}

bool
NativeObject::setSlotSpan(ExclusiveContext* cx, uint32_t span)
{
    MOZ_ASSERT(inDictionaryMode());

    size_t oldSpan = lastProperty()->base()->slotSpan();
    if (oldSpan == span)
        return true;

    if (!updateSlotsForSpan(cx, oldSpan, span))
        return false;

    lastProperty()->base()->setSlotSpan(span);
    return true;
}

bool
NativeObject::growSlots(ExclusiveContext* cx, uint32_t oldCount, uint32_t newCount)
{
    MOZ_ASSERT(newCount > oldCount);
    MOZ_ASSERT_IF(!is<ArrayObject>(), newCount >= SLOT_CAPACITY_MIN);

    /*
     * Slot capacities are determined by the span of allocated objects. Due to
     * the limited number of bits to store shape slots, object growth is
     * throttled well before the slot capacity can overflow.
     */
    NativeObject::slotsSizeMustNotOverflow();
    MOZ_ASSERT(newCount <= MAX_SLOTS_COUNT);

    if (!oldCount) {
        MOZ_ASSERT(!slots_);
        slots_ = AllocateObjectBuffer<HeapSlot>(cx, this, newCount);
        if (!slots_)
            return false;
        Debug_SetSlotRangeToCrashOnTouch(slots_, newCount);
        return true;
    }

    HeapSlot* newslots = ReallocateObjectBuffer<HeapSlot>(cx, this, slots_, oldCount, newCount);
    if (!newslots)
        return false;  /* Leave slots at its old size. */

    slots_ = newslots;

    Debug_SetSlotRangeToCrashOnTouch(slots_ + oldCount, newCount - oldCount);

    return true;
}

/* static */ bool
NativeObject::growSlotsDontReportOOM(ExclusiveContext* cx, NativeObject* obj, uint32_t newCount)
{
    if (!obj->growSlots(cx, obj->numDynamicSlots(), newCount)) {
        cx->recoverFromOutOfMemory();
        return false;
    }
    return true;
}

static void
FreeSlots(ExclusiveContext* cx, HeapSlot* slots)
{
    // Note: threads without a JSContext do not have access to GGC nursery allocated things.
    if (cx->isJSContext())
        return cx->asJSContext()->runtime()->gc.nursery.freeBuffer(slots);
    js_free(slots);
}

void
NativeObject::shrinkSlots(ExclusiveContext* cx, uint32_t oldCount, uint32_t newCount)
{
    MOZ_ASSERT(newCount < oldCount);

    if (newCount == 0) {
        FreeSlots(cx, slots_);
        slots_ = nullptr;
        return;
    }

    MOZ_ASSERT_IF(!is<ArrayObject>(), newCount >= SLOT_CAPACITY_MIN);

    HeapSlot* newslots = ReallocateObjectBuffer<HeapSlot>(cx, this, slots_, oldCount, newCount);
    if (!newslots)
        return;  /* Leave slots at its old size. */

    slots_ = newslots;
}

/* static */ bool
NativeObject::sparsifyDenseElement(ExclusiveContext* cx, HandleNativeObject obj, uint32_t index)
{
    if (!obj->maybeCopyElementsForWrite(cx))
        return false;

    RootedValue value(cx, obj->getDenseElement(index));
    MOZ_ASSERT(!value.isMagic(JS_ELEMENTS_HOLE));

    removeDenseElementForSparseIndex(cx, obj, index);

    uint32_t slot = obj->slotSpan();
    if (!obj->addDataProperty(cx, INT_TO_JSID(index), slot, JSPROP_ENUMERATE)) {
        obj->setDenseElement(index, value);
        return false;
    }

    MOZ_ASSERT(slot == obj->slotSpan() - 1);
    obj->initSlot(slot, value);

    return true;
}

/* static */ bool
NativeObject::sparsifyDenseElements(js::ExclusiveContext* cx, HandleNativeObject obj)
{
    if (!obj->maybeCopyElementsForWrite(cx))
        return false;

    uint32_t initialized = obj->getDenseInitializedLength();

    /* Create new properties with the value of non-hole dense elements. */
    for (uint32_t i = 0; i < initialized; i++) {
        if (obj->getDenseElement(i).isMagic(JS_ELEMENTS_HOLE))
            continue;

        if (!sparsifyDenseElement(cx, obj, i))
            return false;
    }

    if (initialized)
        obj->setDenseInitializedLength(0);

    /*
     * Reduce storage for dense elements which are now holes. Explicitly mark
     * the elements capacity as zero, so that any attempts to add dense
     * elements will be caught in ensureDenseElements.
     */
    if (obj->getDenseCapacity()) {
        obj->shrinkElements(cx, 0);
        obj->getElementsHeader()->capacity = 0;
    }

    return true;
}

bool
NativeObject::willBeSparseElements(uint32_t requiredCapacity, uint32_t newElementsHint)
{
    MOZ_ASSERT(isNative());
    MOZ_ASSERT(requiredCapacity > MIN_SPARSE_INDEX);

    uint32_t cap = getDenseCapacity();
    MOZ_ASSERT(requiredCapacity >= cap);

    if (requiredCapacity > MAX_DENSE_ELEMENTS_COUNT)
        return true;

    uint32_t minimalDenseCount = requiredCapacity / SPARSE_DENSITY_RATIO;
    if (newElementsHint >= minimalDenseCount)
        return false;
    minimalDenseCount -= newElementsHint;

    if (minimalDenseCount > cap)
        return true;

    uint32_t len = getDenseInitializedLength();
    const Value* elems = getDenseElements();
    for (uint32_t i = 0; i < len; i++) {
        if (!elems[i].isMagic(JS_ELEMENTS_HOLE) && !--minimalDenseCount)
            return false;
    }
    return true;
}

/* static */ DenseElementResult
NativeObject::maybeDensifySparseElements(js::ExclusiveContext* cx, HandleNativeObject obj)
{
    /*
     * Wait until after the object goes into dictionary mode, which must happen
     * when sparsely packing any array with more than MIN_SPARSE_INDEX elements
     * (see PropertyTree::MAX_HEIGHT).
     */
    if (!obj->inDictionaryMode())
        return DenseElementResult::Incomplete;

    /*
     * Only measure the number of indexed properties every log(n) times when
     * populating the object.
     */
    uint32_t slotSpan = obj->slotSpan();
    if (slotSpan != RoundUpPow2(slotSpan))
        return DenseElementResult::Incomplete;

    /* Watch for conditions under which an object's elements cannot be dense. */
    if (!obj->nonProxyIsExtensible() || obj->watched())
        return DenseElementResult::Incomplete;

    /*
     * The indexes in the object need to be sufficiently dense before they can
     * be converted to dense mode.
     */
    uint32_t numDenseElements = 0;
    uint32_t newInitializedLength = 0;

    RootedShape shape(cx, obj->lastProperty());
    while (!shape->isEmptyShape()) {
        uint32_t index;
        if (IdIsIndex(shape->propid(), &index)) {
            if (shape->attributes() == JSPROP_ENUMERATE &&
                shape->hasDefaultGetter() &&
                shape->hasDefaultSetter())
            {
                numDenseElements++;
                newInitializedLength = Max(newInitializedLength, index + 1);
            } else {
                /*
                 * For simplicity, only densify the object if all indexed
                 * properties can be converted to dense elements.
                 */
                return DenseElementResult::Incomplete;
            }
        }
        shape = shape->previous();
    }

    if (numDenseElements * SPARSE_DENSITY_RATIO < newInitializedLength)
        return DenseElementResult::Incomplete;

    if (newInitializedLength > MAX_DENSE_ELEMENTS_COUNT)
        return DenseElementResult::Incomplete;

    /*
     * This object meets all necessary restrictions, convert all indexed
     * properties into dense elements.
     */

    if (!obj->maybeCopyElementsForWrite(cx))
        return DenseElementResult::Failure;

    if (newInitializedLength > obj->getDenseCapacity()) {
        if (!obj->growElements(cx, newInitializedLength))
            return DenseElementResult::Failure;
    }

    obj->ensureDenseInitializedLength(cx, newInitializedLength, 0);

    RootedValue value(cx);

    shape = obj->lastProperty();
    while (!shape->isEmptyShape()) {
        jsid id = shape->propid();
        uint32_t index;
        if (IdIsIndex(id, &index)) {
            value = obj->getSlot(shape->slot());

            /*
             * When removing a property from a dictionary, the specified
             * property will be removed from the dictionary list and the
             * last property will then be changed due to reshaping the object.
             * Compute the next shape in the traverse, watching for such
             * removals from the list.
             */
            if (shape != obj->lastProperty()) {
                shape = shape->previous();
                if (!obj->removeProperty(cx, id))
                    return DenseElementResult::Failure;
            } else {
                if (!obj->removeProperty(cx, id))
                    return DenseElementResult::Failure;
                shape = obj->lastProperty();
            }

            obj->setDenseElement(index, value);
        } else {
            shape = shape->previous();
        }
    }

    /*
     * All indexed properties on the object are now dense, clear the indexed
     * flag so that we will not start using sparse indexes again if we need
     * to grow the object.
     */
    if (!obj->clearFlag(cx, BaseShape::INDEXED))
        return DenseElementResult::Failure;

    return DenseElementResult::Success;
}

// Given a requested capacity (in elements) and (potentially) the length of an
// array for which elements are being allocated, compute an actual allocation
// amount (in elements).  (Allocation amounts include space for an
// ObjectElements instance, so a return value of |N| implies
// |N - ObjectElements::VALUES_PER_HEADER| usable elements.)
//
// The requested/actual allocation distinction is meant to:
//
//   * preserve amortized O(N) time to add N elements;
//   * minimize the number of unused elements beyond an array's length, and
//   * provide at least SLOT_CAPACITY_MIN elements no matter what (so adding
//     the first several elements to small arrays only needs one allocation).
//
// Note: the structure and behavior of this method follow along with
// UnboxedArrayObject::chooseCapacityIndex. Changes to the allocation strategy
// in one should generally be matched by the other.
/* static */ bool
NativeObject::goodElementsAllocationAmount(ExclusiveContext* cx, uint32_t reqCapacity,
                                           uint32_t length, uint32_t* goodAmount)
{
    if (reqCapacity > MAX_DENSE_ELEMENTS_COUNT) {
        ReportOutOfMemory(cx);
        return false;
    }

    uint32_t reqAllocated = reqCapacity + ObjectElements::VALUES_PER_HEADER;

    // Handle "small" requests primarily by doubling.
    const uint32_t Mebi = 1 << 20;
    if (reqAllocated < Mebi) {
        uint32_t amount = mozilla::AssertedCast<uint32_t>(RoundUpPow2(reqAllocated));

        // If |amount| would be 2/3 or more of the array's length, adjust
        // it (up or down) to be equal to the array's length.  This avoids
        // allocating excess elements that aren't likely to be needed, either
        // in this resizing or a subsequent one.  The 2/3 factor is chosen so
        // that exceptional resizings will at most triple the capacity, as
        // opposed to the usual doubling.
        uint32_t goodCapacity = amount - ObjectElements::VALUES_PER_HEADER;
        if (length >= reqCapacity && goodCapacity > (length / 3) * 2)
            amount = length + ObjectElements::VALUES_PER_HEADER;

        if (amount < SLOT_CAPACITY_MIN)
            amount = SLOT_CAPACITY_MIN;

        *goodAmount = amount;

        return true;
    }

    // The almost-doubling above wastes a lot of space for larger bucket sizes.
    // For large amounts, switch to bucket sizes that obey this formula:
    //
    //   count(n+1) = Math.ceil(count(n) * 1.125)
    //
    // where |count(n)| is the size of the nth bucket, measured in 2**20 slots.
    // These bucket sizes still preserve amortized O(N) time to add N elements,
    // just with a larger constant factor.
    //
    // The bucket size table below was generated with this JavaScript (and
    // manual reformatting):
    //
    //   for (let n = 1, i = 0; i < 34; i++) {
    //     print('0x' + (n * (1 << 20)).toString(16) + ', ');
    //     n = Math.ceil(n * 1.125);
    //   }
    static const uint32_t BigBuckets[] = {
        0x100000, 0x200000, 0x300000, 0x400000, 0x500000, 0x600000, 0x700000,
        0x800000, 0x900000, 0xb00000, 0xd00000, 0xf00000, 0x1100000, 0x1400000,
        0x1700000, 0x1a00000, 0x1e00000, 0x2200000, 0x2700000, 0x2c00000,
        0x3200000, 0x3900000, 0x4100000, 0x4a00000, 0x5400000, 0x5f00000,
        0x6b00000, 0x7900000, 0x8900000, 0x9b00000, 0xaf00000, 0xc500000,
        0xde00000, 0xfa00000
    };
    MOZ_ASSERT(BigBuckets[ArrayLength(BigBuckets) - 1] <= MAX_DENSE_ELEMENTS_ALLOCATION);

    // Pick the first bucket that'll fit |reqAllocated|.
    for (uint32_t b : BigBuckets) {
        if (b >= reqAllocated) {
            *goodAmount = b;
            return true;
        }
    }

    // Otherwise, return the maximum bucket size.
    *goodAmount = MAX_DENSE_ELEMENTS_ALLOCATION;
    return true;
}

bool
NativeObject::growElements(ExclusiveContext* cx, uint32_t reqCapacity)
{
    MOZ_ASSERT(nonProxyIsExtensible());
    MOZ_ASSERT(canHaveNonEmptyElements());
    if (denseElementsAreCopyOnWrite())
        MOZ_CRASH();

    uint32_t oldCapacity = getDenseCapacity();
    MOZ_ASSERT(oldCapacity < reqCapacity);

    uint32_t newAllocated = 0;
    if (is<ArrayObject>() && !as<ArrayObject>().lengthIsWritable()) {
        MOZ_ASSERT(reqCapacity <= as<ArrayObject>().length());
        MOZ_ASSERT(reqCapacity <= MAX_DENSE_ELEMENTS_COUNT);
        // Preserve the |capacity <= length| invariant for arrays with
        // non-writable length.  See also js::ArraySetLength which initially
        // enforces this requirement.
        newAllocated = reqCapacity + ObjectElements::VALUES_PER_HEADER;
    } else {
        if (!goodElementsAllocationAmount(cx, reqCapacity, getElementsHeader()->length, &newAllocated))
            return false;
    }

    uint32_t newCapacity = newAllocated - ObjectElements::VALUES_PER_HEADER;
    MOZ_ASSERT(newCapacity > oldCapacity && newCapacity >= reqCapacity);

    // If newCapacity exceeds MAX_DENSE_ELEMENTS_COUNT, the array should become
    // sparse.
    MOZ_ASSERT(newCapacity <= MAX_DENSE_ELEMENTS_COUNT);

    uint32_t initlen = getDenseInitializedLength();

    HeapSlot* oldHeaderSlots = reinterpret_cast<HeapSlot*>(getElementsHeader());
    HeapSlot* newHeaderSlots;
    if (hasDynamicElements()) {
        MOZ_ASSERT(oldCapacity <= MAX_DENSE_ELEMENTS_COUNT);
        uint32_t oldAllocated = oldCapacity + ObjectElements::VALUES_PER_HEADER;

        newHeaderSlots = ReallocateObjectBuffer<HeapSlot>(cx, this, oldHeaderSlots, oldAllocated, newAllocated);
        if (!newHeaderSlots)
            return false;   // Leave elements at its old size.
    } else {
        newHeaderSlots = AllocateObjectBuffer<HeapSlot>(cx, this, newAllocated);
        if (!newHeaderSlots)
            return false;   // Leave elements at its old size.
        PodCopy(newHeaderSlots, oldHeaderSlots, ObjectElements::VALUES_PER_HEADER + initlen);
    }

    ObjectElements* newheader = reinterpret_cast<ObjectElements*>(newHeaderSlots);
    newheader->capacity = newCapacity;
    elements_ = newheader->elements();

    Debug_SetSlotRangeToCrashOnTouch(elements_ + initlen, newCapacity - initlen);

    return true;
}

void
NativeObject::shrinkElements(ExclusiveContext* cx, uint32_t reqCapacity)
{
    uint32_t oldCapacity = getDenseCapacity();
    MOZ_ASSERT(reqCapacity < oldCapacity);

    MOZ_ASSERT(canHaveNonEmptyElements());
    if (denseElementsAreCopyOnWrite())
        MOZ_CRASH();

    if (!hasDynamicElements())
        return;

    uint32_t newAllocated = 0;
    MOZ_ALWAYS_TRUE(goodElementsAllocationAmount(cx, reqCapacity, 0, &newAllocated));
    MOZ_ASSERT(oldCapacity <= MAX_DENSE_ELEMENTS_COUNT);
    uint32_t oldAllocated = oldCapacity + ObjectElements::VALUES_PER_HEADER;
    if (newAllocated == oldAllocated)
        return;  // Leave elements at its old size.

    MOZ_ASSERT(newAllocated > ObjectElements::VALUES_PER_HEADER);
    uint32_t newCapacity = newAllocated - ObjectElements::VALUES_PER_HEADER;
    MOZ_ASSERT(newCapacity <= MAX_DENSE_ELEMENTS_COUNT);

    HeapSlot* oldHeaderSlots = reinterpret_cast<HeapSlot*>(getElementsHeader());
    HeapSlot* newHeaderSlots = ReallocateObjectBuffer<HeapSlot>(cx, this, oldHeaderSlots,
                                                                oldAllocated, newAllocated);
    if (!newHeaderSlots) {
        cx->recoverFromOutOfMemory();
        return;  // Leave elements at its old size.
    }

    ObjectElements* newheader = reinterpret_cast<ObjectElements*>(newHeaderSlots);
    newheader->capacity = newCapacity;
    elements_ = newheader->elements();
}

/* static */ bool
NativeObject::CopyElementsForWrite(ExclusiveContext* cx, NativeObject* obj)
{
    MOZ_ASSERT(obj->denseElementsAreCopyOnWrite());

    // The original owner of a COW elements array should never be modified.
    MOZ_ASSERT(obj->getElementsHeader()->ownerObject() != obj);

    uint32_t initlen = obj->getDenseInitializedLength();
    uint32_t newAllocated = 0;
    if (!goodElementsAllocationAmount(cx, initlen, 0, &newAllocated))
        return false;

    uint32_t newCapacity = newAllocated - ObjectElements::VALUES_PER_HEADER;

    // COPY_ON_WRITE flags is set only if obj is a dense array.
    MOZ_ASSERT(newCapacity <= MAX_DENSE_ELEMENTS_COUNT);

    JSObject::writeBarrierPre(obj->getElementsHeader()->ownerObject());

    HeapSlot* newHeaderSlots = AllocateObjectBuffer<HeapSlot>(cx, obj, newAllocated);
    if (!newHeaderSlots)
        return false;
    ObjectElements* newheader = reinterpret_cast<ObjectElements*>(newHeaderSlots);
    js_memcpy(newheader, obj->getElementsHeader(),
              (ObjectElements::VALUES_PER_HEADER + initlen) * sizeof(Value));

    newheader->capacity = newCapacity;
    newheader->clearCopyOnWrite();
    obj->elements_ = newheader->elements();

    Debug_SetSlotRangeToCrashOnTouch(obj->elements_ + initlen, newCapacity - initlen);

    return true;
}

/* static */ bool
NativeObject::allocSlot(ExclusiveContext* cx, HandleNativeObject obj, uint32_t* slotp)
{
    uint32_t slot = obj->slotSpan();
    MOZ_ASSERT(slot >= JSSLOT_FREE(obj->getClass()));

    /*
     * If this object is in dictionary mode, try to pull a free slot from the
     * shape table's slot-number freelist.
     */
    if (obj->inDictionaryMode()) {
        ShapeTable& table = obj->lastProperty()->table();
        uint32_t last = table.freeList();
        if (last != SHAPE_INVALID_SLOT) {
#ifdef DEBUG
            MOZ_ASSERT(last < slot);
            uint32_t next = obj->getSlot(last).toPrivateUint32();
            MOZ_ASSERT_IF(next != SHAPE_INVALID_SLOT, next < slot);
#endif

            *slotp = last;

            const Value& vref = obj->getSlot(last);
            table.setFreeList(vref.toPrivateUint32());
            obj->setSlot(last, UndefinedValue());
            return true;
        }
    }

    if (slot >= SHAPE_MAXIMUM_SLOT) {
        ReportOutOfMemory(cx);
        return false;
    }

    *slotp = slot;

    if (obj->inDictionaryMode() && !obj->setSlotSpan(cx, slot + 1))
        return false;

    return true;
}

void
NativeObject::freeSlot(uint32_t slot)
{
    MOZ_ASSERT(slot < slotSpan());

    if (inDictionaryMode()) {
        ShapeTable& table = lastProperty()->table();
        uint32_t last = table.freeList();

        /* Can't afford to check the whole freelist, but let's check the head. */
        MOZ_ASSERT_IF(last != SHAPE_INVALID_SLOT, last < slotSpan() && last != slot);

        /*
         * Place all freed slots other than reserved slots (bug 595230) on the
         * dictionary's free list.
         */
        if (JSSLOT_FREE(getClass()) <= slot) {
            MOZ_ASSERT_IF(last != SHAPE_INVALID_SLOT, last < slotSpan());
            setSlot(slot, PrivateUint32Value(last));
            table.setFreeList(slot);
            return;
        }
    }
    setSlot(slot, UndefinedValue());
}

Shape*
NativeObject::addDataProperty(ExclusiveContext* cx, jsid idArg, uint32_t slot, unsigned attrs)
{
    MOZ_ASSERT(!(attrs & (JSPROP_GETTER | JSPROP_SETTER)));
    RootedNativeObject self(cx, this);
    RootedId id(cx, idArg);
    return addProperty(cx, self, id, nullptr, nullptr, slot, attrs, 0);
}

Shape*
NativeObject::addDataProperty(ExclusiveContext* cx, HandlePropertyName name,
                          uint32_t slot, unsigned attrs)
{
    MOZ_ASSERT(!(attrs & (JSPROP_GETTER | JSPROP_SETTER)));
    RootedNativeObject self(cx, this);
    RootedId id(cx, NameToId(name));
    return addProperty(cx, self, id, nullptr, nullptr, slot, attrs, 0);
}

template <AllowGC allowGC>
bool
js::NativeLookupOwnProperty(ExclusiveContext* cx,
                            typename MaybeRooted<NativeObject*, allowGC>::HandleType obj,
                            typename MaybeRooted<jsid, allowGC>::HandleType id,
                            typename MaybeRooted<Shape*, allowGC>::MutableHandleType propp)
{
    bool done;
    return LookupOwnPropertyInline<allowGC>(cx, obj, id, propp, &done);
}

template bool
js::NativeLookupOwnProperty<CanGC>(ExclusiveContext* cx, HandleNativeObject obj, HandleId id,
                                   MutableHandleShape propp);

template bool
js::NativeLookupOwnProperty<NoGC>(ExclusiveContext* cx, NativeObject* obj, jsid id,
                                  FakeMutableHandle<Shape*> propp);

/*** [[DefineOwnProperty]] ***********************************************************************/

static inline bool
CallAddPropertyHook(ExclusiveContext* cx, HandleNativeObject obj, HandleShape shape,
                    HandleValue value)
{
    if (JSAddPropertyOp addProperty = obj->getClass()->addProperty) {
        if (!cx->shouldBeJSContext())
            return false;

        RootedId id(cx, shape->propid());
        if (!CallJSAddPropertyOp(cx->asJSContext(), addProperty, obj, id, value)) {
            obj->removeProperty(cx, shape->propid());
            return false;
        }
    }
    return true;
}

static inline bool
CallAddPropertyHookDense(ExclusiveContext* cx, HandleNativeObject obj, uint32_t index,
                         HandleValue value)
{
    // Inline addProperty for array objects.
    if (obj->is<ArrayObject>()) {
        ArrayObject* arr = &obj->as<ArrayObject>();
        uint32_t length = arr->length();
        if (index >= length)
            arr->setLength(cx, index + 1);
        return true;
    }

    if (JSAddPropertyOp addProperty = obj->getClass()->addProperty) {
        if (!cx->shouldBeJSContext())
            return false;

        if (!obj->maybeCopyElementsForWrite(cx))
            return false;

        RootedId id(cx, INT_TO_JSID(index));
        if (!CallJSAddPropertyOp(cx->asJSContext(), addProperty, obj, id, value)) {
            obj->setDenseElementHole(cx, index);
            return false;
        }
    }
    return true;
}

static bool
UpdateShapeTypeAndValue(ExclusiveContext* cx, NativeObject* obj, Shape* shape, const Value& value)
{
    jsid id = shape->propid();
    if (shape->hasSlot()) {
        obj->setSlotWithType(cx, shape, value, /* overwriting = */ false);

        // Per the acquired properties analysis, when the shape of a partially
        // initialized object is changed to its fully initialized shape, its
        // group can be updated as well.
        if (TypeNewScript* newScript = obj->groupRaw()->newScript()) {
            if (newScript->initializedShape() == shape)
                obj->setGroup(newScript->initializedGroup());
        }
    }
    if (!shape->hasSlot() || !shape->hasDefaultGetter() || !shape->hasDefaultSetter())
        MarkTypePropertyNonData(cx, obj, id);
    if (!shape->writable())
        MarkTypePropertyNonWritable(cx, obj, id);
    return true;
}

static bool
PurgeProtoChain(ExclusiveContext* cx, JSObject* objArg, HandleId id)
{
    /* Root locally so we can re-assign. */
    RootedObject obj(cx, objArg);

    RootedShape shape(cx);
    while (obj) {
        /* Lookups will not be cached through non-native protos. */
        if (!obj->isNative())
            break;

        shape = obj->as<NativeObject>().lookup(cx, id);
        if (shape)
            return obj->as<NativeObject>().shadowingShapeChange(cx, *shape);

        obj = obj->getProto();
    }

    return true;
}

static bool
PurgeScopeChainHelper(ExclusiveContext* cx, HandleObject objArg, HandleId id)
{
    /* Re-root locally so we can re-assign. */
    RootedObject obj(cx, objArg);

    MOZ_ASSERT(obj->isNative());
    MOZ_ASSERT(obj->isDelegate());

    /* Lookups on integer ids cannot be cached through prototypes. */
    if (JSID_IS_INT(id))
        return true;

    if (!PurgeProtoChain(cx, obj->getProto(), id))
        return false;

    /*
     * We must purge the scope chain only for Call objects as they are the only
     * kind of cacheable non-global object that can gain properties after outer
     * properties with the same names have been cached or traced. Call objects
     * may gain such properties via eval introducing new vars; see bug 490364.
     */
    if (obj->is<CallObject>()) {
        while ((obj = obj->enclosingScope()) != nullptr) {
            if (!PurgeProtoChain(cx, obj, id))
                return false;
        }
    }

    return true;
}

/*
 * PurgeScopeChain does nothing if obj is not itself a prototype or parent
 * scope, else it reshapes the scope and prototype chains it links. It calls
 * PurgeScopeChainHelper, which asserts that obj is flagged as a delegate
 * (i.e., obj has ever been on a prototype or parent chain).
 */
static inline bool
PurgeScopeChain(ExclusiveContext* cx, HandleObject obj, HandleId id)
{
    if (obj->isDelegate() && obj->isNative())
        return PurgeScopeChainHelper(cx, obj, id);
    return true;
}

static bool
AddOrChangeProperty(ExclusiveContext* cx, HandleNativeObject obj, HandleId id,
                    Handle<PropertyDescriptor> desc)
{
    desc.assertComplete();

    if (!PurgeScopeChain(cx, obj, id))
        return false;

    // Use dense storage for new indexed properties where possible.
    if (JSID_IS_INT(id) &&
        !desc.getter() &&
        !desc.setter() &&
        desc.attributes() == JSPROP_ENUMERATE &&
        (!obj->isIndexed() || !obj->containsPure(id)) &&
        !IsAnyTypedArray(obj))
    {
        uint32_t index = JSID_TO_INT(id);
        DenseElementResult edResult = obj->ensureDenseElements(cx, index, 1);
        if (edResult == DenseElementResult::Failure)
            return false;
        if (edResult == DenseElementResult::Success) {
            obj->setDenseElementWithType(cx, index, desc.value());
            if (!CallAddPropertyHookDense(cx, obj, index, desc.value()))
                return false;
            return true;
        }
    }

    RootedShape shape(cx, NativeObject::putProperty(cx, obj, id, desc.getter(), desc.setter(),
                                                    SHAPE_INVALID_SLOT, desc.attributes(), 0));
    if (!shape)
        return false;

    if (!UpdateShapeTypeAndValue(cx, obj, shape, desc.value()))
        return false;

    // Clear any existing dense index after adding a sparse indexed property,
    // and investigate converting the object to dense indexes.
    if (JSID_IS_INT(id)) {
        if (!obj->maybeCopyElementsForWrite(cx))
            return false;

        uint32_t index = JSID_TO_INT(id);
        NativeObject::removeDenseElementForSparseIndex(cx, obj, index);
        DenseElementResult edResult =
            NativeObject::maybeDensifySparseElements(cx, obj);
        if (edResult == DenseElementResult::Failure)
            return false;
        if (edResult == DenseElementResult::Success) {
            MOZ_ASSERT(!desc.setter());
            return CallAddPropertyHookDense(cx, obj, index, desc.value());
        }
    }

    return CallAddPropertyHook(cx, obj, shape, desc.value());
}

static bool IsConfigurable(unsigned attrs) { return (attrs & JSPROP_PERMANENT) == 0; }
static bool IsEnumerable(unsigned attrs) { return (attrs & JSPROP_ENUMERATE) != 0; }
static bool IsWritable(unsigned attrs) { return (attrs & JSPROP_READONLY) == 0; }

static bool IsAccessorDescriptor(unsigned attrs) {
    return (attrs & (JSPROP_GETTER | JSPROP_SETTER)) != 0;
}

static bool IsDataDescriptor(unsigned attrs) {
    MOZ_ASSERT((attrs & (JSPROP_IGNORE_VALUE | JSPROP_IGNORE_READONLY)) == 0);
    return !IsAccessorDescriptor(attrs);
}

template <AllowGC allowGC>
static MOZ_ALWAYS_INLINE bool
GetExistingProperty(JSContext* cx,
                    typename MaybeRooted<Value, allowGC>::HandleType receiver,
                    typename MaybeRooted<NativeObject*, allowGC>::HandleType obj,
                    typename MaybeRooted<Shape*, allowGC>::HandleType shape,
                    typename MaybeRooted<Value, allowGC>::MutableHandleType vp);

static bool
GetExistingPropertyValue(ExclusiveContext* cx, HandleNativeObject obj, HandleId id,
                         HandleShape shape, MutableHandleValue vp)
{
    if (IsImplicitDenseOrTypedArrayElement(shape)) {
        vp.set(obj->getDenseOrTypedArrayElement(JSID_TO_INT(id)));
        return true;
    }
    if (!cx->shouldBeJSContext())
        return false;

    MOZ_ASSERT(shape->propid() == id);
    MOZ_ASSERT(obj->contains(cx, shape));

    RootedValue receiver(cx, ObjectValue(*obj));
    return GetExistingProperty<CanGC>(cx->asJSContext(), receiver, obj, shape, vp);
}

/*
 * If ES6 draft rev 37 9.1.6.3 ValidateAndApplyPropertyDescriptor step 4 would
 * return early, because desc is redundant with an existing own property obj[id],
 * then set *redundant = true and return true.
 */
static bool
DefinePropertyIsRedundant(ExclusiveContext* cx, HandleNativeObject obj, HandleId id,
                          HandleShape shape, unsigned shapeAttrs,
                          Handle<PropertyDescriptor> desc, bool *redundant)
{
    *redundant = false;

    if (desc.hasConfigurable() && desc.configurable() != ((shapeAttrs & JSPROP_PERMANENT) == 0))
        return true;
    if (desc.hasEnumerable() && desc.enumerable() != ((shapeAttrs & JSPROP_ENUMERATE) != 0))
        return true;
    if (desc.isDataDescriptor()) {
        if ((shapeAttrs & (JSPROP_GETTER | JSPROP_SETTER)) != 0)
            return true;
        if (desc.hasWritable() && desc.writable() != ((shapeAttrs & JSPROP_READONLY) == 0))
            return true;
        if (desc.hasValue()) {
            // Get the current value of the existing property.
            RootedValue currentValue(cx);
            if (!IsImplicitDenseOrTypedArrayElement(shape) &&
                shape->hasSlot() &&
                shape->hasDefaultGetter())
            {
                // Inline GetExistingPropertyValue in order to omit a type
                // correctness assertion that's too strict for this particular
                // call site. For details, see bug 1125624 comments 13-16.
                currentValue.set(obj->getSlot(shape->slot()));
            } else {
                if (!GetExistingPropertyValue(cx, obj, id, shape, &currentValue))
                    return false;
            }

            // The specification calls for SameValue here, but it seems to be a
            // bug. See <https://bugs.ecmascript.org/show_bug.cgi?id=3508>.
            if (desc.value() != currentValue)
                return true;
        }

        GetterOp existingGetterOp =
            IsImplicitDenseOrTypedArrayElement(shape) ? nullptr : shape->getter();
        if (desc.getter() != existingGetterOp)
            return true;

        SetterOp existingSetterOp =
            IsImplicitDenseOrTypedArrayElement(shape) ? nullptr : shape->setter();
        if (desc.setter() != existingSetterOp)
            return true;
    } else {
        if (desc.hasGetterObject()) {
            if (!(shapeAttrs & JSPROP_GETTER) || desc.getterObject() != shape->getterObject())
                return true;
        }
        if (desc.hasSetterObject()) {
            if (!(shapeAttrs & JSPROP_SETTER) || desc.setterObject() != shape->setterObject())
                return true;
        }
    }

    *redundant = true;
    return true;
}

bool
js::NativeDefineProperty(ExclusiveContext* cx, HandleNativeObject obj, HandleId id,
                         Handle<PropertyDescriptor> desc_,
                         ObjectOpResult& result)
{
    desc_.assertValid();

    // Section numbers and step numbers below refer to ES6 draft rev 36
    // (17 March 2015).
    //
    // This function aims to implement 9.1.6 [[DefineOwnProperty]] as well as
    // the [[DefineOwnProperty]] methods described in 9.4.2.1 (arrays), 9.4.4.2
    // (arguments), and 9.4.5.3 (typed array views).

    // Dispense with custom behavior of exotic native objects first.
    if (obj->is<ArrayObject>()) {
        // 9.4.2.1 step 2. Redefining an array's length is very special.
        Rooted<ArrayObject*> arr(cx, &obj->as<ArrayObject>());
        if (id == NameToId(cx->names().length)) {
            if (!cx->shouldBeJSContext())
                return false;
            return ArraySetLength(cx->asJSContext(), arr, id, desc_.attributes(), desc_.value(),
                                  result);
        }

        // 9.4.2.1 step 3. Don't extend a fixed-length array.
        uint32_t index;
        if (IdIsIndex(id, &index)) {
            if (WouldDefinePastNonwritableLength(obj, index))
                return result.fail(JSMSG_CANT_DEFINE_PAST_ARRAY_LENGTH);
        }
    } else if (IsAnyTypedArray(obj)) {
        // 9.4.5.3 step 3. Indexed properties of typed arrays are special.
        uint64_t index;
        if (IsTypedArrayIndex(id, &index)) {
            if (!cx->shouldBeJSContext())
                return false;
            return DefineTypedArrayElement(cx->asJSContext(), obj, index, desc_, result);
        }
    } else if (obj->is<ArgumentsObject>()) {
        if (id == NameToId(cx->names().length)) {
            // Either we are resolving the .length property on this object, or
            // redefining it. In the latter case only, we must set a bit. To
            // distinguish the two cases, we note that when resolving, the
            // property won't already exist; whereas the first time it is
            // redefined, it will.
            if ((desc_.attributes() & JSPROP_RESOLVING) == 0)
                obj->as<ArgumentsObject>().markLengthOverridden();
        }
    }

    // 9.1.6.1 OrdinaryDefineOwnProperty steps 1-2.
    RootedShape shape(cx);
    if (desc_.attributes() & JSPROP_RESOLVING) {
        // We are being called from a resolve or enumerate hook to reify a
        // lazily-resolved property. To avoid reentering the resolve hook and
        // recursing forever, skip the resolve hook when doing this lookup.
        NativeLookupOwnPropertyNoResolve(cx, obj, id, &shape);
    } else {
        if (!NativeLookupOwnProperty<CanGC>(cx, obj, id, &shape))
            return false;
    }

    // From this point, the step numbers refer to
    // 9.1.6.3, ValidateAndApplyPropertyDescriptor.
    // Step 1 is a redundant assertion.

    // Filling in desc: Here we make a copy of the desc_ argument. We will turn
    // it into a complete descriptor before updating obj. The spec algorithm
    // does not explicitly do this, but the end result is the same. Search for
    // "fill in" below for places where the filling-in actually occurs.
    Rooted<PropertyDescriptor> desc(cx, desc_);

    // Step 2.
    if (!shape) {
        if (!obj->nonProxyIsExtensible())
            return result.fail(JSMSG_CANT_DEFINE_PROP_OBJECT_NOT_EXTENSIBLE);

        // Fill in missing desc fields with defaults.
        CompletePropertyDescriptor(&desc);

        if (!AddOrChangeProperty(cx, obj, id, desc))
            return false;
        return result.succeed();
    }

    MOZ_ASSERT(shape);

    // Steps 3-4. (Step 3 is a special case of step 4.) We use shapeAttrs as a
    // stand-in for shape in many places below, since shape might not be a
    // pointer to a real Shape (see IsImplicitDenseOrTypedArrayElement).
    unsigned shapeAttrs = GetShapeAttributes(obj, shape);
    bool redundant;
    if (!DefinePropertyIsRedundant(cx, obj, id, shape, shapeAttrs, desc, &redundant))
        return false;
    if (redundant) {
        // In cases involving JSOP_NEWOBJECT and JSOP_INITPROP, obj can have a
        // type for this property that doesn't match the value in the slot.
        // Update the type here, even though this DefineProperty call is
        // otherwise a no-op. (See bug 1125624 comment 13.)
        if (!IsImplicitDenseOrTypedArrayElement(shape) && desc.hasValue()) {
            if (!UpdateShapeTypeAndValue(cx, obj, shape, desc.value()))
                return false;
        }
        return result.succeed();
    }

    // Non-standard hack: Allow redefining non-configurable properties if
    // JSPROP_REDEFINE_NONCONFIGURABLE is set _and_ the object is a non-DOM
    // global. The idea is that a DOM object can never have such a thing on
    // its proto chain directly on the web, so we should be OK optimizing
    // access to accessors found on such an object. Bug 1105518 contemplates
    // removing this hack.
    bool skipRedefineChecks = (desc.attributes() & JSPROP_REDEFINE_NONCONFIGURABLE) &&
                              obj->is<GlobalObject>() &&
                              !obj->getClass()->isDOMClass();

    // Step 5.
    if (!IsConfigurable(shapeAttrs) && !skipRedefineChecks) {
        if (desc.hasConfigurable() && desc.configurable())
            return result.fail(JSMSG_CANT_REDEFINE_PROP);
        if (desc.hasEnumerable() && desc.enumerable() != IsEnumerable(shapeAttrs))
            return result.fail(JSMSG_CANT_REDEFINE_PROP);
    }

    // Fill in desc.[[Configurable]] and desc.[[Enumerable]] if missing.
    if (!desc.hasConfigurable())
        desc.setConfigurable(IsConfigurable(shapeAttrs));
    if (!desc.hasEnumerable())
        desc.setEnumerable(IsEnumerable(shapeAttrs));

    // Steps 6-9.
    if (desc.isGenericDescriptor()) {
        // Step 6. No further validation is required.

        // Fill in desc. A generic descriptor has none of these fields, so copy
        // everything from shape.
        MOZ_ASSERT(!desc.hasValue());
        MOZ_ASSERT(!desc.hasWritable());
        MOZ_ASSERT(!desc.hasGetterObject());
        MOZ_ASSERT(!desc.hasSetterObject());
        if (IsDataDescriptor(shapeAttrs)) {
            RootedValue currentValue(cx);
            if (!GetExistingPropertyValue(cx, obj, id, shape, &currentValue))
                return false;
            desc.setValue(currentValue);
            desc.setWritable(IsWritable(shapeAttrs));
        } else {
            desc.setGetterObject(shape->getterObject());
            desc.setSetterObject(shape->setterObject());
        }
    } else if (desc.isDataDescriptor() != IsDataDescriptor(shapeAttrs)) {
        // Step 7.
        if (!IsConfigurable(shapeAttrs) && !skipRedefineChecks)
            return result.fail(JSMSG_CANT_REDEFINE_PROP);

        if (IsImplicitDenseOrTypedArrayElement(shape)) {
            MOZ_ASSERT(!IsAnyTypedArray(obj));
            if (!NativeObject::sparsifyDenseElement(cx, obj, JSID_TO_INT(id)))
                return false;
            shape = obj->lookup(cx, id);
        }

        // Fill in desc fields with default values (steps 7.b.i and 7.c.i).
        CompletePropertyDescriptor(&desc);
    } else if (desc.isDataDescriptor()) {
        // Step 8.
        bool frozen = !IsConfigurable(shapeAttrs) && !IsWritable(shapeAttrs);
        if (frozen && desc.hasWritable() && desc.writable() && !skipRedefineChecks)
            return result.fail(JSMSG_CANT_REDEFINE_PROP);

        if (frozen || !desc.hasValue()) {
            if (IsImplicitDenseOrTypedArrayElement(shape)) {
                MOZ_ASSERT(!IsAnyTypedArray(obj));
                if (!NativeObject::sparsifyDenseElement(cx, obj, JSID_TO_INT(id)))
                    return false;
                shape = obj->lookup(cx, id);
            }

            RootedValue currentValue(cx);
            if (!GetExistingPropertyValue(cx, obj, id, shape, &currentValue))
                return false;

            if (!desc.hasValue()) {
                // Fill in desc.[[Value]].
                desc.setValue(currentValue);
            } else {
                // Step 8.a.ii.1.
                bool same;
                if (!cx->shouldBeJSContext())
                    return false;
                if (!SameValue(cx->asJSContext(), desc.value(), currentValue, &same))
                    return false;
                if (!same && !skipRedefineChecks)
                    return result.fail(JSMSG_CANT_REDEFINE_PROP);
            }
        }

        if (!desc.hasWritable())
            desc.setWritable(IsWritable(shapeAttrs));
    } else {
        // Step 9.
        MOZ_ASSERT(shape->isAccessorDescriptor());
        MOZ_ASSERT(desc.isAccessorDescriptor());

        // The spec says to use SameValue, but since the values in
        // question are objects, we can just compare pointers.
        if (desc.hasSetterObject()) {
            if (!IsConfigurable(shapeAttrs) &&
                desc.setterObject() != shape->setterObject() &&
                !skipRedefineChecks)
            {
                return result.fail(JSMSG_CANT_REDEFINE_PROP);
            }
        } else {
            // Fill in desc.[[Set]] from shape.
            desc.setSetterObject(shape->setterObject());
        }
        if (desc.hasGetterObject()) {
            if (!IsConfigurable(shapeAttrs) &&
                desc.getterObject() != shape->getterObject() &&
                !skipRedefineChecks)
            {
                return result.fail(JSMSG_CANT_REDEFINE_PROP);
            }
        } else {
            // Fill in desc.[[Get]] from shape.
            desc.setGetterObject(shape->getterObject());
        }
    }

    // Step 10.
    if (!AddOrChangeProperty(cx, obj, id, desc))
        return false;
    return result.succeed();
}

bool
js::NativeDefineProperty(ExclusiveContext* cx, HandleNativeObject obj, HandleId id,
                         HandleValue value, GetterOp getter, SetterOp setter, unsigned attrs,
                         ObjectOpResult& result)
{
    Rooted<PropertyDescriptor> desc(cx);
    desc.initFields(nullptr, value, attrs, getter, setter);
    return NativeDefineProperty(cx, obj, id, desc, result);
}

bool
js::NativeDefineProperty(ExclusiveContext* cx, HandleNativeObject obj, PropertyName* name,
                         HandleValue value, GetterOp getter, SetterOp setter, unsigned attrs,
                         ObjectOpResult& result)
{
    RootedId id(cx, NameToId(name));
    return NativeDefineProperty(cx, obj, id, value, getter, setter, attrs, result);
}

bool
js::NativeDefineElement(ExclusiveContext* cx, HandleNativeObject obj, uint32_t index,
                        HandleValue value, GetterOp getter, SetterOp setter, unsigned attrs,
                        ObjectOpResult& result)
{
    RootedId id(cx);
    if (index <= JSID_INT_MAX) {
        id = INT_TO_JSID(index);
        return NativeDefineProperty(cx, obj, id, value, getter, setter, attrs, result);
    }

    AutoRooterGetterSetter gsRoot(cx, attrs, &getter, &setter);

    if (!IndexToId(cx, index, &id))
        return false;

    return NativeDefineProperty(cx, obj, id, value, getter, setter, attrs, result);
}

bool
js::NativeDefineProperty(ExclusiveContext* cx, HandleNativeObject obj, HandleId id,
                         HandleValue value, JSGetterOp getter, JSSetterOp setter,
                         unsigned attrs)
{
    ObjectOpResult result;
    if (!NativeDefineProperty(cx, obj, id, value, getter, setter, attrs, result))
        return false;
    if (!result) {
        // Off-main-thread callers should not get here: they must call this
        // function only with known-valid arguments. Populating a new
        // PlainObject with configurable properties is fine.
        if (!cx->shouldBeJSContext())
            return false;
        result.reportError(cx->asJSContext(), obj, id);
        return false;
    }
    return true;
}

bool
js::NativeDefineProperty(ExclusiveContext* cx, HandleNativeObject obj, PropertyName* name,
                         HandleValue value, JSGetterOp getter, JSSetterOp setter,
                         unsigned attrs)
{
    RootedId id(cx, NameToId(name));
    return NativeDefineProperty(cx, obj, id, value, getter, setter, attrs);
}


/*** [[HasProperty]] *****************************************************************************/

// ES6 draft rev31 9.1.7.1 OrdinaryHasProperty
bool
js::NativeHasProperty(JSContext* cx, HandleNativeObject obj, HandleId id, bool* foundp)
{
    RootedNativeObject pobj(cx, obj);
    RootedShape shape(cx);

    // This loop isn't explicit in the spec algorithm. See the comment on step
    // 7.a. below.
    for (;;) {
        // Steps 2-3. ('done' is a SpiderMonkey-specific thing, used below.)
        bool done;
        if (!LookupOwnPropertyInline<CanGC>(cx, pobj, id, &shape, &done))
            return false;

        // Step 4.
        if (shape) {
            *foundp = true;
            return true;
        }

        // Step 5-6. The check for 'done' on this next line is tricky.
        // done can be true in exactly these unlikely-sounding cases:
        // - We're looking up an element, and pobj is a TypedArray that
        //   doesn't have that many elements.
        // - We're being called from a resolve hook to assign to the property
        //   being resolved.
        // What they all have in common is we do not want to keep walking
        // the prototype chain, and always claim that the property
        // doesn't exist.
        RootedObject proto(cx, done ? nullptr : pobj->getProto());

        // Step 8.
        if (!proto) {
            *foundp = false;
            return true;
        }

        // Step 7.a. If the prototype is also native, this step is a
        // recursive tail call, and we don't need to go through all the
        // plumbing of HasProperty; the top of the loop is where
        // we're going to end up anyway. But if pobj is non-native,
        // that optimization would be incorrect.
        if (!proto->isNative())
            return HasProperty(cx, proto, id, foundp);

        pobj = &proto->as<NativeObject>();
    }
}


/*** [[Get]] *************************************************************************************/

static inline bool
CallGetter(JSContext* cx, HandleObject obj, HandleValue receiver, HandleShape shape,
           MutableHandleValue vp)
{
    MOZ_ASSERT(!shape->hasDefaultGetter());

    if (shape->hasGetterValue()) {
        Value fval = shape->getterValue();
        return InvokeGetter(cx, receiver, fval, vp);
    }

    // In contrast to normal getters JSGetterOps always want the holder.
    RootedId id(cx, shape->propid());
    return CallJSGetterOp(cx, shape->getterOp(), obj, id, vp);
}

template <AllowGC allowGC>
static MOZ_ALWAYS_INLINE bool
GetExistingProperty(JSContext* cx,
                    typename MaybeRooted<Value, allowGC>::HandleType receiver,
                    typename MaybeRooted<NativeObject*, allowGC>::HandleType obj,
                    typename MaybeRooted<Shape*, allowGC>::HandleType shape,
                    typename MaybeRooted<Value, allowGC>::MutableHandleType vp)
{
    if (shape->hasSlot()) {
        vp.set(obj->getSlot(shape->slot()));
        MOZ_ASSERT_IF(!vp.isMagic(JS_UNINITIALIZED_LEXICAL) &&
                      !obj->isSingleton() &&
                      !obj->template is<ScopeObject>() &&
                      shape->hasDefaultGetter(),
                      ObjectGroupHasProperty(cx, obj->group(), shape->propid(), vp));
    } else {
        vp.setUndefined();
    }
    if (shape->hasDefaultGetter())
        return true;

    {
        jsbytecode* pc;
        JSScript* script = cx->currentScript(&pc);
        if (script && script->hasBaselineScript()) {
            switch (JSOp(*pc)) {
              case JSOP_GETPROP:
              case JSOP_CALLPROP:
              case JSOP_LENGTH:
                script->baselineScript()->noteAccessedGetter(script->pcToOffset(pc));
                break;
              default:
                break;
            }
        }
    }

    if (!allowGC)
        return false;

    if (!CallGetter(cx,
                    MaybeRooted<JSObject*, allowGC>::toHandle(obj),
                    MaybeRooted<Value, allowGC>::toHandle(receiver),
                    MaybeRooted<Shape*, allowGC>::toHandle(shape),
                    MaybeRooted<Value, allowGC>::toMutableHandle(vp)))
    {
        return false;
    }

    // Ancient nonstandard extension: via the JSAPI it's possible to create a
    // data property that has both a slot and a getter. In that case, copy the
    // value returned by the getter back into the slot.
    if (shape->hasSlot() && obj->contains(cx, shape))
        obj->setSlot(shape->slot(), vp);

    return true;
}

bool
js::NativeGetExistingProperty(JSContext* cx, HandleObject receiver, HandleNativeObject obj,
                              HandleShape shape, MutableHandleValue vp)
{
    RootedValue receiverValue(cx, ObjectValue(*receiver));
    return GetExistingProperty<CanGC>(cx, receiverValue, obj, shape, vp);
}

/*
 * Given pc pointing after a property accessing bytecode, return true if the
 * access is "property-detecting" -- that is, if we shouldn't warn about it
 * even if no such property is found and strict warnings are enabled.
 */
static bool
Detecting(JSContext* cx, JSScript* script, jsbytecode* pc)
{
    MOZ_ASSERT(script->containsPC(pc));

    // General case: a branch or equality op follows the access.
    JSOp op = JSOp(*pc);
    if (CodeSpec[op].format & JOF_DETECTING)
        return true;

    jsbytecode* endpc = script->codeEnd();

    if (op == JSOP_NULL) {
        // Special case #1: don't warn about (obj.prop == null).
        if (++pc < endpc) {
            op = JSOp(*pc);
            return op == JSOP_EQ || op == JSOP_NE;
        }
        return false;
    }

    if (op == JSOP_GETGNAME || op == JSOP_GETNAME) {
        // Special case #2: don't warn about (obj.prop == undefined).
        JSAtom* atom = script->getAtom(GET_UINT32_INDEX(pc));
        if (atom == cx->names().undefined &&
            (pc += CodeSpec[op].length) < endpc) {
            op = JSOp(*pc);
            return op == JSOP_EQ || op == JSOP_NE || op == JSOP_STRICTEQ || op == JSOP_STRICTNE;
        }
    }

    return false;
}

enum IsNameLookup { NotNameLookup = false, NameLookup = true };

/*
 * Finish getting the property `receiver[id]` after looking at every object on
 * the prototype chain and not finding any such property.
 *
 * Per the spec, this should just set the result to `undefined` and call it a
 * day. However:
 *
 * 1.  We add support for the nonstandard JSClass::getProperty hook.
 *
 * 2.  This function also runs when we're evaluating an expression that's an
 *     Identifier (that is, an unqualified name lookup), so we need to figure
 *     out if that's what's happening and throw a ReferenceError if so.
 *
 * 3.  We also emit an optional warning for this. (It's not super useful on the
 *     web, as there are too many false positives, but anecdotally useful in
 *     Gecko code.)
 */
static bool
GetNonexistentProperty(JSContext* cx, HandleNativeObject obj, HandleId id,
                       HandleValue receiver, IsNameLookup nameLookup, MutableHandleValue vp)
{
    vp.setUndefined();

    // Non-standard extension: Call the getProperty hook. If it sets vp to a
    // value other than undefined, we're done. If not, fall through to the
    // warning/error checks below.
    if (JSGetterOp getProperty = obj->getClass()->getProperty) {
        if (!CallJSGetterOp(cx, getProperty, obj, id, vp))
            return false;

        if (!vp.isUndefined())
            return true;
    }

    // If we are doing a name lookup, this is a ReferenceError.
    if (nameLookup)
        return ReportIsNotDefined(cx, id);

    // Give a strict warning if foo.bar is evaluated by a script for an object
    // foo with no property named 'bar'.
    //
    // Don't warn if extra warnings not enabled or for random getprop
    // operations.
    if (!cx->compartment()->options().extraWarnings(cx))
        return true;

    jsbytecode* pc;
    RootedScript script(cx, cx->currentScript(&pc));
    if (!script)
        return true;

    if (*pc != JSOP_GETPROP && *pc != JSOP_GETELEM)
        return true;

    // Don't warn repeatedly for the same script.
    if (script->warnedAboutUndefinedProp())
        return true;

    // Don't warn in self-hosted code (where the further presence of
    // JS::RuntimeOptions::werror() would result in impossible-to-avoid
    // errors to entirely-innocent client code).
    if (script->selfHosted())
        return true;

    // We may just be checking if that object has an iterator.
    if (JSID_IS_ATOM(id, cx->names().iteratorIntrinsic))
        return true;

    // Do not warn about tests like (obj[prop] == undefined).
    pc += CodeSpec[*pc].length;
    if (Detecting(cx, script, pc))
        return true;

    unsigned flags = JSREPORT_WARNING | JSREPORT_STRICT;
    script->setWarnedAboutUndefinedProp();

    // Ok, bad undefined property reference: whine about it.
    RootedValue val(cx, IdToValue(id));
    return ReportValueErrorFlags(cx, flags, JSMSG_UNDEFINED_PROP, JSDVG_IGNORE_STACK, val,
                                    nullptr, nullptr, nullptr);
}

/* The NoGC version of GetNonexistentProperty, present only to make types line up. */
bool
GetNonexistentProperty(JSContext* cx, NativeObject* obj, jsid id, Value& receiver,
                       IsNameLookup nameLookup, FakeMutableHandle<Value> vp)
{
    return false;
}

static inline bool
GeneralizedGetProperty(JSContext* cx, HandleObject obj, HandleId id, HandleValue receiver,
                       IsNameLookup nameLookup, MutableHandleValue vp)
{
    JS_CHECK_RECURSION(cx, return false);
    if (nameLookup) {
        // When nameLookup is true, GetProperty implements ES6 rev 34 (2015 Feb
        // 20) 8.1.1.2.6 GetBindingValue, with step 3 (the call to HasProperty)
        // and step 6 (the call to Get) fused so that only a single lookup is
        // needed.
        //
        // If we get here, we've reached a non-native object. Fall back on the
        // algorithm as specified, with two separate lookups. (Note that we
        // throw ReferenceErrors regardless of strictness, technically a bug.)

        bool found;
        if (!HasProperty(cx, obj, id, &found))
            return false;
        if (!found)
            return ReportIsNotDefined(cx, id);
    }

    return GetProperty(cx, obj, receiver, id, vp);
}

static inline bool
GeneralizedGetProperty(JSContext* cx, JSObject* obj, jsid id, const Value& receiver,
                       IsNameLookup nameLookup, FakeMutableHandle<Value> vp)
{
    JS_CHECK_RECURSION_DONT_REPORT(cx, return false);
    if (nameLookup)
        return false;
    return GetPropertyNoGC(cx, obj, receiver, id, vp.address());
}

template <AllowGC allowGC>
static MOZ_ALWAYS_INLINE bool
NativeGetPropertyInline(JSContext* cx,
                        typename MaybeRooted<NativeObject*, allowGC>::HandleType obj,
                        typename MaybeRooted<Value, allowGC>::HandleType receiver,
                        typename MaybeRooted<jsid, allowGC>::HandleType id,
                        IsNameLookup nameLookup,
                        typename MaybeRooted<Value, allowGC>::MutableHandleType vp)
{
    typename MaybeRooted<NativeObject*, allowGC>::RootType pobj(cx, obj);
    typename MaybeRooted<Shape*, allowGC>::RootType shape(cx);

    // This loop isn't explicit in the spec algorithm. See the comment on step
    // 4.d below.
    for (;;) {
        // Steps 2-3. ('done' is a SpiderMonkey-specific thing, used below.)
        bool done;
        if (!LookupOwnPropertyInline<allowGC>(cx, pobj, id, &shape, &done))
            return false;

        if (shape) {
            // Steps 5-8. Special case for dense elements because
            // GetExistingProperty doesn't support those.
            if (IsImplicitDenseOrTypedArrayElement(shape)) {
                vp.set(pobj->getDenseOrTypedArrayElement(JSID_TO_INT(id)));
                return true;
            }
            return GetExistingProperty<allowGC>(cx, receiver, pobj, shape, vp);
        }

        // Steps 4.a-b. The check for 'done' on this next line is tricky.
        // done can be true in exactly these unlikely-sounding cases:
        // - We're looking up an element, and pobj is a TypedArray that
        //   doesn't have that many elements.
        // - We're being called from a resolve hook to assign to the property
        //   being resolved.
        // What they all have in common is we do not want to keep walking
        // the prototype chain.
        RootedObject proto(cx, done ? nullptr : pobj->getProto());

        // Step 4.c. The spec algorithm simply returns undefined if proto is
        // null, but see the comment on GetNonexistentProperty.
        if (!proto)
            return GetNonexistentProperty(cx, obj, id, receiver, nameLookup, vp);

        // Step 4.d. If the prototype is also native, this step is a
        // recursive tail call, and we don't need to go through all the
        // plumbing of JSObject::getGeneric; the top of the loop is where
        // we're going to end up anyway. But if pobj is non-native,
        // that optimization would be incorrect.
        if (proto->getOps()->getProperty)
            return GeneralizedGetProperty(cx, proto, id, receiver, nameLookup, vp);

        pobj = &proto->as<NativeObject>();
    }
}

bool
js::NativeGetProperty(JSContext* cx, HandleNativeObject obj, HandleValue receiver, HandleId id,
                      MutableHandleValue vp)
{
    return NativeGetPropertyInline<CanGC>(cx, obj, receiver, id, NotNameLookup, vp);
}

bool
js::NativeGetPropertyNoGC(JSContext* cx, NativeObject* obj, const Value& receiver, jsid id, Value* vp)
{
    AutoAssertNoException noexc(cx);
    return NativeGetPropertyInline<NoGC>(cx, obj, receiver, id, NotNameLookup, vp);
}

bool
js::GetPropertyForNameLookup(JSContext* cx, HandleObject obj, HandleId id, MutableHandleValue vp)
{
    RootedValue receiver(cx, ObjectValue(*obj));
    if (obj->getOps()->getProperty)
        return GeneralizedGetProperty(cx, obj, id, receiver, NameLookup, vp);
    return NativeGetPropertyInline<CanGC>(cx, obj.as<NativeObject>(), receiver, id, NameLookup, vp);
}


/*** [[Set]] *************************************************************************************/

static bool
MaybeReportUndeclaredVarAssignment(JSContext* cx, JSString* propname)
{
    unsigned flags;
    {
        jsbytecode* pc;
        JSScript* script = cx->currentScript(&pc, JSContext::ALLOW_CROSS_COMPARTMENT);
        if (!script)
            return true;

        // If the code is not strict and extra warnings aren't enabled, then no
        // check is needed.
        if (IsStrictSetPC(pc))
            flags = JSREPORT_ERROR;
        else if (cx->compartment()->options().extraWarnings(cx))
            flags = JSREPORT_WARNING | JSREPORT_STRICT;
        else
            return true;
    }

    JSAutoByteString bytes(cx, propname);
    return !!bytes &&
           JS_ReportErrorFlagsAndNumber(cx, flags, GetErrorMessage, nullptr,
                                        JSMSG_UNDECLARED_VAR, bytes.ptr());
}

/*
 * Finish assignment to a shapeful data property of a native object obj. This
 * conforms to no standard and there is a lot of legacy baggage here.
 */
static bool
NativeSetExistingDataProperty(JSContext* cx, HandleNativeObject obj, HandleShape shape,
                              HandleValue v, HandleValue receiver, ObjectOpResult& result)
{
    MOZ_ASSERT(obj->isNative());
    MOZ_ASSERT(shape->isDataDescriptor());

    if (shape->hasDefaultSetter()) {
        if (shape->hasSlot()) {
            // The common path. Standard data property.

            // Global properties declared with 'var' will be initially
            // defined with an undefined value, so don't treat the initial
            // assignments to such properties as overwrites.
            bool overwriting = !obj->is<GlobalObject>() || !obj->getSlot(shape->slot()).isUndefined();
            obj->setSlotWithType(cx, shape, v, overwriting);
            return result.succeed();
        }

        // Bizarre: shared (slotless) property that's writable but has no
        // JSSetterOp. JS code can't define such a property, but it can be done
        // through the JSAPI. Treat it as non-writable.
        return result.fail(JSMSG_GETTER_ONLY);
    }

    MOZ_ASSERT(!obj->is<DynamicWithObject>());  // See bug 1128681.

    uint32_t sample = cx->runtime()->propertyRemovals;
    RootedId id(cx, shape->propid());
    RootedValue value(cx, v);
    if (!CallJSSetterOp(cx, shape->setterOp(), obj, id, &value, result))
        return false;

    // Update any slot for the shape with the value produced by the setter,
    // unless the setter deleted the shape.
    if (shape->hasSlot() &&
        (MOZ_LIKELY(cx->runtime()->propertyRemovals == sample) ||
         obj->contains(cx, shape)))
    {
        obj->setSlot(shape->slot(), value);
    }

    return true;  // result is populated by CallJSSetterOp above.
}

/*
 * When a [[Set]] operation finds no existing property with the given id
 * or finds a writable data property on the prototype chain, we end up here.
 * Finish the [[Set]] by defining a new property on receiver.
 *
 * This implements ES6 draft rev 28, 9.1.9 [[Set]] steps 5.b-f, but it
 * is really old code and there are a few barnacles.
 */
bool
js::SetPropertyByDefining(JSContext* cx, HandleId id, HandleValue v, HandleValue receiverValue,
                          ObjectOpResult& result)
{
    // Step 5.b.
    if (!receiverValue.isObject())
        return result.fail(JSMSG_SET_NON_OBJECT_RECEIVER);
    RootedObject receiver(cx, &receiverValue.toObject());

    bool existing;
    {
        // Steps 5.c-d.
        Rooted<PropertyDescriptor> desc(cx);
        if (!GetOwnPropertyDescriptor(cx, receiver, id, &desc))
            return false;

        existing = !!desc.object();

        // Step 5.e.
        if (existing) {
            // Step 5.e.i.
            if (desc.isAccessorDescriptor())
                return result.fail(JSMSG_OVERWRITING_ACCESSOR);

            // Step 5.e.ii.
            if (!desc.writable())
                return result.fail(JSMSG_READ_ONLY);
        }
    }

    // Invalidate SpiderMonkey-specific caches or bail.
    const Class* clasp = receiver->getClass();

    // Purge the property cache of now-shadowed id in receiver's scope chain.
    if (!PurgeScopeChain(cx, receiver, id))
        return false;

    // Steps 5.e.iii-iv. and 5.f.i. Define the new data property.
    unsigned attrs =
        existing
        ? JSPROP_IGNORE_ENUMERATE | JSPROP_IGNORE_READONLY | JSPROP_IGNORE_PERMANENT
        : JSPROP_ENUMERATE;
    JSGetterOp getter = clasp->getProperty;
    JSSetterOp setter = clasp->setProperty;
    MOZ_ASSERT(getter != JS_PropertyStub);
    MOZ_ASSERT(setter != JS_StrictPropertyStub);
    if (!DefineProperty(cx, receiver, id, v, getter, setter, attrs, result))
        return false;

    // If the receiver is native, there is one more legacy wrinkle: the class
    // JSSetterOp is called after defining the new property.
    if (setter && receiver->is<NativeObject>()) {
        if (!result)
            return true;

        Rooted<NativeObject*> nativeReceiver(cx, &receiver->as<NativeObject>());
        if (!cx->shouldBeJSContext())
            return false;
        RootedValue receiverValue(cx, ObjectValue(*receiver));

        // This lookup is a bit unfortunate, but not nearly the most
        // unfortunate thing about Class getters and setters. Since the above
        // DefineProperty call succeeded, receiver is native, and the property
        // has a setter (and thus can't be a dense element), this lookup is
        // guaranteed to succeed.
        RootedShape shape(cx, nativeReceiver->lookup(cx, id));
        MOZ_ASSERT(shape);
        return NativeSetExistingDataProperty(cx->asJSContext(), nativeReceiver, shape, v,
                                             receiverValue, result);
    }

    return true;
}

// When setting |id| for |receiver| and |obj| has no property for id, continue
// the search up the prototype chain.
bool
js::SetPropertyOnProto(JSContext* cx, HandleObject obj, HandleId id, HandleValue v,
                       HandleValue receiver, ObjectOpResult& result)
{
    MOZ_ASSERT(!obj->is<ProxyObject>());

    RootedObject proto(cx, obj->getProto());
    if (proto)
        return SetProperty(cx, proto, id, v, receiver, result);
    return SetPropertyByDefining(cx, id, v, receiver, result);
}

/*
 * Implement "the rest of" assignment to a property when no property receiver[id]
 * was found anywhere on the prototype chain.
 *
 * FIXME: This should be updated to follow ES6 draft rev 28, section 9.1.9,
 * steps 4.d.i and 5.
 */
static bool
SetNonexistentProperty(JSContext* cx, HandleId id, HandleValue v, HandleValue receiver,
                       QualifiedBool qualified, ObjectOpResult& result)
{
    // We should never add properties to lexical blocks.
    MOZ_ASSERT_IF(receiver.isObject(), !receiver.toObject().is<BlockObject>());

    if (!qualified && receiver.isObject() && receiver.toObject().isUnqualifiedVarObj()) {
        if (!MaybeReportUndeclaredVarAssignment(cx, JSID_TO_STRING(id)))
            return false;
    }

    return SetPropertyByDefining(cx, id, v, receiver, result);
}

/*
 * Set an existing own property obj[index] that's a dense element or typed
 * array element.
 */
static bool
SetDenseOrTypedArrayElement(JSContext* cx, HandleNativeObject obj, uint32_t index, HandleValue v,
                            ObjectOpResult& result)
{
    if (IsAnyTypedArray(obj)) {
        double d;
        if (!ToNumber(cx, v, &d))
            return false;

        // Silently do nothing for out-of-bounds sets, for consistency with
        // current behavior.  (ES6 currently says to throw for this in
        // strict mode code, so we may eventually need to change.)
        uint32_t len = AnyTypedArrayLength(obj);
        if (index < len) {
            if (obj->is<TypedArrayObject>())
                TypedArrayObject::setElement(obj->as<TypedArrayObject>(), index, d);
        }
        return result.succeed();
    }

    if (WouldDefinePastNonwritableLength(obj, index))
        return result.fail(JSMSG_CANT_DEFINE_PAST_ARRAY_LENGTH);

    if (!obj->maybeCopyElementsForWrite(cx))
        return false;

    obj->setDenseElementWithType(cx, index, v);
    return result.succeed();
}

/*
 * Finish the assignment `receiver[id] = v` when an existing property (shape)
 * has been found on a native object (pobj). This implements ES6 draft rev 32
 * (2015 Feb 2) 9.1.9 steps 5 and 6.
 *
 * It is necessary to pass both id and shape because shape could be an implicit
 * dense or typed array element (i.e. not actually a pointer to a Shape).
 */
static bool
SetExistingProperty(JSContext* cx, HandleNativeObject obj, HandleId id, HandleValue v,
                    HandleValue receiver, HandleNativeObject pobj, HandleShape shape,
                    ObjectOpResult& result)
{
    // Step 5 for dense elements.
    if (IsImplicitDenseOrTypedArrayElement(shape)) {
        // Step 5.a is a no-op: all dense elements are writable.

        // Pure optimization for the common case:
        if (receiver.isObject() && pobj == &receiver.toObject())
            return SetDenseOrTypedArrayElement(cx, pobj, JSID_TO_INT(id), v, result);

        // Steps 5.b-f.
        return SetPropertyByDefining(cx, id, v, receiver, result);
    }

    // Step 5 for all other properties.
    if (shape->isDataDescriptor()) {
        // Step 5.a.
        if (!shape->writable())
            return result.fail(JSMSG_READ_ONLY);

        // steps 5.c-f.
        if (receiver.isObject() && pobj == &receiver.toObject()) {
            // Pure optimization for the common case. There's no point performing
            // the lookup in step 5.c again, as our caller just did it for us. The
            // result is |shape|.

            // Steps 5.e.i-ii.
            if (pobj->is<ArrayObject>() && id == NameToId(cx->names().length)) {
                Rooted<ArrayObject*> arr(cx, &pobj->as<ArrayObject>());
                return ArraySetLength(cx, arr, id, shape->attributes(), v, result);
            }
            return NativeSetExistingDataProperty(cx, pobj, shape, v, receiver, result);
        }

        // SpiderMonkey special case: assigning to an inherited slotless
        // property causes the setter to be called, instead of shadowing,
        // unless the existing property is JSPROP_SHADOWABLE (see bug 552432).
        if (!shape->hasSlot() && !shape->hasShadowable()) {
            // Even weirder sub-special-case: inherited slotless data property
            // with default setter. Wut.
            if (shape->hasDefaultSetter())
                return result.succeed();

            RootedValue valCopy(cx, v);
            return CallJSSetterOp(cx, shape->setterOp(), obj, id, &valCopy, result);
        }

        // Shadow pobj[id] by defining a new data property receiver[id].
        // Delegate everything to SetPropertyByDefining.
        return SetPropertyByDefining(cx, id, v, receiver, result);
    }

    // Steps 6-11.
    MOZ_ASSERT(shape->isAccessorDescriptor());
    MOZ_ASSERT_IF(!shape->hasSetterObject(), shape->hasDefaultSetter());
    if (shape->hasDefaultSetter())
        return result.fail(JSMSG_GETTER_ONLY);
    Value setter = ObjectValue(*shape->setterObject());
    if (!InvokeSetter(cx, receiver, setter, v))
        return false;
    return result.succeed();
}

bool
js::NativeSetProperty(JSContext* cx, HandleNativeObject obj, HandleId id, HandleValue value,
                      HandleValue receiver, QualifiedBool qualified, ObjectOpResult& result)
{
    // Fire watchpoints, if any.
    RootedValue v(cx, value);
    if (MOZ_UNLIKELY(obj->watched())) {
        WatchpointMap* wpmap = cx->compartment()->watchpointMap;
        if (wpmap && !wpmap->triggerWatchpoint(cx, obj, id, &v))
            return false;
    }

    // Step numbers below reference ES6 rev 27 9.1.9, the [[Set]] internal
    // method for ordinary objects. We substitute our own names for these names
    // used in the spec: O -> pobj, P -> id, ownDesc -> shape.
    RootedShape shape(cx);
    RootedNativeObject pobj(cx, obj);

    // This loop isn't explicit in the spec algorithm. See the comment on step
    // 4.c.i below. (There's a very similar loop in the NativeGetProperty
    // implementation, but unfortunately not similar enough to common up.)
    for (;;) {
        // Steps 2-3. ('done' is a SpiderMonkey-specific thing, used below.)
        bool done;
        if (!LookupOwnPropertyInline<CanGC>(cx, pobj, id, &shape, &done))
            return false;

        if (shape) {
            // Steps 5-6.
            return SetExistingProperty(cx, obj, id, v, receiver, pobj, shape, result);
        }

        // Steps 4.a-b. The check for 'done' on this next line is tricky.
        // done can be true in exactly these unlikely-sounding cases:
        // - We're looking up an element, and pobj is a TypedArray that
        //   doesn't have that many elements.
        // - We're being called from a resolve hook to assign to the property
        //   being resolved.
        // What they all have in common is we do not want to keep walking
        // the prototype chain.
        RootedObject proto(cx, done ? nullptr : pobj->getProto());
        if (!proto) {
            // Step 4.d.i (and step 5).
            return SetNonexistentProperty(cx, id, v, receiver, qualified, result);
        }

        // Step 4.c.i. If the prototype is also native, this step is a
        // recursive tail call, and we don't need to go through all the
        // plumbing of SetProperty; the top of the loop is where we're going to
        // end up anyway. But if pobj is non-native, that optimization would be
        // incorrect.
        if (!proto->isNative()) {
            // Unqualified assignments are not specified to go through [[Set]]
            // at all, but they do go through this function. So check for
            // unqualified assignment to a nonexistent global (a strict error).
            if (!qualified) {
                bool found;
                if (!HasProperty(cx, proto, id, &found))
                    return false;
                if (!found)
                    return SetNonexistentProperty(cx, id, v, receiver, qualified, result);
            }

            return SetProperty(cx, proto, id, v, receiver, result);
        }
        pobj = &proto->as<NativeObject>();
    }
}

bool
js::NativeSetElement(JSContext* cx, HandleNativeObject obj, uint32_t index, HandleValue v,
                     HandleValue receiver, ObjectOpResult& result)
{
    RootedId id(cx);
    if (!IndexToId(cx, index, &id))
        return false;
    return NativeSetProperty(cx, obj, id, v, receiver, Qualified, result);
}

/*** [[Delete]] **********************************************************************************/

// ES6 draft rev31 9.1.10 [[Delete]]
bool
js::NativeDeleteProperty(JSContext* cx, HandleNativeObject obj, HandleId id,
                         ObjectOpResult& result)
{
    // Steps 2-3.
    RootedShape shape(cx);
    if (!NativeLookupOwnProperty<CanGC>(cx, obj, id, &shape))
        return false;

    // Step 4.
    if (!shape) {
        // If no property call the class's delProperty hook, passing succeeded
        // as the result parameter. This always succeeds when there is no hook.
        return CallJSDeletePropertyOp(cx, obj->getClass()->delProperty, obj, id, result);
    }

    cx->runtime()->gc.poke();

    // Step 6. Non-configurable property.
    if (GetShapeAttributes(obj, shape) & JSPROP_PERMANENT)
        return result.failCantDelete();

    if (!CallJSDeletePropertyOp(cx, obj->getClass()->delProperty, obj, id, result))
        return false;
    if (!result)
        return true;

    // Step 5.
    if (IsImplicitDenseOrTypedArrayElement(shape)) {
        // Typed array elements are non-configurable.
        MOZ_ASSERT(!IsAnyTypedArray(obj));

        if (!obj->maybeCopyElementsForWrite(cx))
            return false;

        obj->setDenseElementHole(cx, JSID_TO_INT(id));
    } else {
        if (!obj->removeProperty(cx, id))
            return false;
    }

    return SuppressDeletedProperty(cx, obj, id);
}