Starboard

Starboard is Cobalt's porting layer and OS abstraction. It attempts to encompass all the platform-specific functionality that Cobalt actually uses, and nothing that it does not.

Current State

Starboard is still in development, and now runs Cobalt. The biggest things that are missing, but coming soon, are:

Media support. Some APIs have been defined, but they are not complete, they are not wired into Cobalt, they aren't yet implemented, and they are subject to change.
Blitter support. This is support for a hardware accelerated 2D blitter, which some older platforms will have instead of OpenGL.

Interesting Source Locations

All source locations are specified relative to src/starboard/ (this directory).

. - This is the root directory for the Starboard project, and contains all the public headers that Starboard defines.
examples/ - Example code demonstrating various aspects of Starboard API usage.
linux/ - The home of the Linux Starboard implementation. This contains a starboard_platform.gyp file that defines a library with all the source files needed to provide a complete Starboard Linux implementation. Source files that are specific to Linux are in this directory, whereas shared implementations are pulled from the shared directory.
nplb/ - “No Platform Left Behind,” Starboard's platform verification test suite.
shared/ - The home of all code that can be shared between Starboard implementations. Subdirectories delimit code that can be shared between platforms that share some facet of their OS API.

Building with Starboard

Follow the Cobalt instructions, except when invoking gyp:

$ cobalt/build/gyp_cobalt -C debug linux-x64x11

and when invoking ninja:

$ ninja -C out/linux-x64x11_debug cobalt

Quick Guide to Starting a Port

I. Enumerate and Name Your Platform Configurations

Before starting a Cobalt/Starboard port, first you will need to define the canonical names for your set of platform configurations. These will be used when organizing the code for your platforms.

What determines what goes into one platform configuration versus another? A platform configuration has a one-to-one mapping to a production binary. So, if you will need to produce a new binary, you are going to need a new platform configuration for that.

The recommended naming convention for a <platform-configuration> is:

<family-name>-<binary-variant>

Where <family-name> is a name specific to the family of products you are porting to Starboard and <binary-variant> is one or more tokens that uniquely describe the specifics of the binary you want that configuration to produce.

For example, let's say your company is named BobCo. BobCo employs multiple different device architectures so it will need to define multiple platform configurations.

All the BobCo devices are called BobBox, so it's a reasonable choice as a product <family-name>. But they have both big- and little-endian MIPS chips. So they might define two platform configurations:

bobbox-mipseb - For big-endian MIPS devices.
bobbox-mipsel - For little-endian MIPS devices.

II. Choose a Location in the Source Tree for Your Starboard Port

To be perfectly compatible with the Cobalt source tree layout, any code that is written by a party that isn't the Cobalt team should be in the src/third_party/ directory. The choice is up to you, but we recommend that you follow this practice, even if, as we expect to be common, you do not plan on sharing your Starboard implementation with anyone.

Primarily, following this convention ensures that no future changes to Cobalt or Starboard will conflict with your source code additions. Starboard is intended to be a junction where new Cobalt versions or Starboard implementations can be replaced without significant (and hopefully, any) code changes.

We recommend that you place your code here in the source tree:

src/third_party/starboard/<family-name>/

With subdirectories:

shared/ - For code shared between architectures within a product family.
<binary-variant>/ - For any code that is specific to a specific binary variant. Each one of these must at least have configuration_public.h, atomic_public.h, thread_types_public.h, gyp_configuration.py, gyp_configuration.gypi, and starboard_platform.gyp files.

In the BobCo's BobBox example, we would see something like:

src/third_party/starboard/bobbox/
- shared/
- mipseb/
  - atomic_public.h
  - configuration_public.h
  - gyp_configuration.gypi
  - gyp_configuration.py
  - starboard_platform.gyp
  - thread_types_public.h
- mipsel/
  - atomic_public.h
  - configuration_public.h
  - gyp_configuration.gypi
  - gyp_configuration.py
  - starboard_platform.gyp
  - thread_types_public.h

And so on.

III. Base Your Port on a Reference Port

You can start off by copying files from a reference port to your port's location. Currently these reference ports include:

src/starboard/stub
src/starboard/linux
src/starboard/raspi

The starboard_platform.gyp contains absolute paths, so the paths will still be valid if you copy it to a new directory. You can then incrementally replace files with new implementations as necessary.

For example, if your device runs Linux, you should start from linux.

Rename the x64x11/ directory to <binary-variant> (e.g. mipseb).

Modify the files in <binary-variant>/ as appropriate (you will probably be coming back to these files a lot).

Update <binary-variant>/starboard_platform.gyp to point at all the source files that you want to build as your new Starboard implementation. The '<(DEPTH)' expression in GYP expands to enough ../s to take you to the src/ directory of your source tree. Otherwise, files are assumed to be relative to the directory the .gyp or .gypi file is in.

IV. Add Your Platform Configurations to cobalt_gyp

In order to use a new platform configuration in a build, you need to ensure that you have a gyp_configuration.py, gyp_configuration.gypi, and starboard_platform.gypi in their own directory for each binary variant, plus the header files configuration_public.h, atomic_public.h, and thread_types_public.h. gyp_cobalt will scan your directories for these files, and then calculate a port name based on the directories between src/third_party/starboard and your gyp_configuration.* files. (e.g. for src/third_party/starboard/bobbox/mipseb/gyp_configuration.py, it would choose the port name bobbox_mipseb.)

Set up gyp_configuration.py
1. Copy src/starboard/linux/x64x11/gyp_configuration.py to src/third_party/starboard/<family-name>/<binary-variant>/gyp_configuration.py. You may also consider copying from another reference platform, like raspi-1.
2. In gyp_configuration.py
  1. In the _PlatformConfig.__init__() function, remove checks for Clang or GOMA.
  2. In the CreatePlatformConfig() function, pass your <platform-configuration> as the parameter to the _PlatformConfig constructor, like return _PlatformConfig('bobbox-mipseb').
3. In GetVariables
  1. Set 'clang': 1 if your toolchain is clang.
  2. Delete other variables in that function that are not needed for your platform.
  3. In GetEnvironmentVariables, set the dictionary values to point to the toolchain analogs for the toolchain for your platform.
Set up gyp_configuration.gypi
1. Copy src/starboard/linux/x64x11/gyp_configuration.gypi to src/third_party/starboard/<family-name>/<binary-variant>/gyp_configuration.gypi. You may also consider copying from another reference platform, like raspi-1.
2. Update your platform variables.
  1. Set 'target_arch' to your architecture: 'arm', 'ppc', 'x64', 'x86', 'mips'
  2. Set 'target_os': 'linux' if your platform is Linux-based.
  3. Set 'gl_type': 'system_gles2' if you are using the system EGL + GLES2 implementation.
  4. Set 'in_app_dial' to 1 or 0. This enables or disables the DIAL server that runs inside Cobalt, only when Coblat is running. You do not want in-app DIAL if you already have system-wide DIAL support.
3. Update your toolchain command-line flags and libraries. Make sure you don't assume a particular workstation layout, as it is likely to be different for someone else.
4. Update the global defines in 'target_defaults'.'defines', if necessary.

You should now be able to run gyp with your new port. From your src/ directory:

$ cobalt/build/gyp_cobalt -C debug bobbox-mipseb
$ ninja -C out/bobbox-mipseb_debug nplb

This will attempt to build the “No Platform Left Behind” test suite with your new Starboard implementation, and you are ready to start porting!

Suggested Implementation Order

When bringing up a new Starboard platform, it is suggested that you try to get the NPLB tests passing module-by-module. Because of dependencies between modules, you will find it easier to get some modules passing sooner than other modules.

Here's a recommended module implementation order in which to get things going (still significantly subject to change based on feedback):

Configuration
main(), Application, & Event Pump (i.e. the call into SbEventHandle)
Memory
Byte Swap
Time
String/Character/Double
Log
File
Directory
System
Atomic
Thread & Thread Types
Mutex
Condition Variable
Once
Socket
SocketWaiter
Window
Input
Blitter (if applicable)
Audio Sink
Media & Player
DRM
TimeZone
User
Storage