/*
 * Copyright (C) 2018 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

syntax = "proto2";

package perfetto.protos;

// Statistics for the internals of the tracing service.
//
// Next id: 17.
message TraceStats {
  // From TraceBuffer::Stats.
  //
  // Next id: 20.
  message BufferStats {
    // Size of the circular buffer in bytes.
    optional uint64 buffer_size = 12;

    // Num. bytes written into the circular buffer, including chunk headers.
    optional uint64 bytes_written = 1;

    // Num. bytes overwritten before they have been read (i.e. loss of data).
    optional uint64 bytes_overwritten = 13;

    // Total size of chunks that were fully read from the circular buffer by the
    // consumer. This may not be equal to |bytes_written| either in the middle
    // of tracing, or if |chunks_overwritten| is non-zero. Note that this is the
    // size of the chunks read from the buffer, including chunk headers, which
    // will be different from the total size of packets returned to the
    // consumer.
    //
    // The current utilization of the trace buffer (mid-tracing) can be obtained
    // by subtracting |bytes_read| and |bytes_overwritten| from |bytes_written|,
    // adding the difference of |padding_bytes_written| and
    // |padding_bytes_cleared|, and comparing this sum to the |buffer_size|.
    // Note that this represents the total size of buffered data in the buffer,
    // yet this data may be spread non-contiguously through the buffer and may
    // be overridden before the utilization reaches 100%.
    optional uint64 bytes_read = 14;

    // Num. bytes that were allocated as padding between chunks in the circular
    // buffer.
    optional uint64 padding_bytes_written = 15;

    // Num. of padding bytes that were removed from the circular buffer when
    // they were overwritten.
    //
    // The difference between |padding_bytes_written| and
    // |padding_bytes_cleared| denotes the total size of padding currently
    // present in the buffer.
    optional uint64 padding_bytes_cleared = 16;

    // Num. chunks (!= packets) written into the buffer.
    optional uint64 chunks_written = 2;

    // Num. chunks (!= packets) rewritten into the buffer. This means we rewrote
    // the same chunk with additional packets appended to the end.
    optional uint64 chunks_rewritten = 10;

    // Num. chunks overwritten before they have been read (i.e. loss of data).
    optional uint64 chunks_overwritten = 3;

    // Num. chunks discarded (i.e. loss of data). Can be > 0 only when a buffer
    // is configured with FillPolicy == DISCARD.
    optional uint64 chunks_discarded = 18;

    // Num. chunks (!= packets) that were fully read from the circular buffer by
    // the consumer. This may not be equal to |chunks_written| either in the
    // middle of tracing, or if |chunks_overwritten| is non-zero.
    optional uint64 chunks_read = 17;

    // Num. chunks that were committed out of order.
    optional uint64 chunks_committed_out_of_order = 11;

    // Num. times the ring buffer wrapped around.
    optional uint64 write_wrap_count = 4;

    // Num. out-of-band (OOB) patches that succeeded.
    optional uint64 patches_succeeded = 5;

    // Num. OOB patches that failed (e.g., the chunk to patch was gone).
    optional uint64 patches_failed = 6;

    // Num. readaheads (for large multi-chunk packet reads) that ended up in a
    // successful packet read.
    optional uint64 readaheads_succeeded = 7;

    // Num. readaheads aborted because of missing chunks in the sequence stream.
    // Note that a small number > 0 is totally expected: occasionally, when
    // issuing a read, the very last packet in a sequence might be incomplete
    // (because the producer is still writing it while we read). The read will
    // stop at that point, for that sequence, increasing this counter.
    optional uint64 readaheads_failed = 8;

    // Num. of violations of the SharedMemoryABI found while writing or reading
    // the buffer. This is an indication of either a bug in the producer(s) or
    // malicious producer(s).
    optional uint64 abi_violations = 9;

    // The fields below have been introduced in Android R.

    // Num. of times the service detected packet loss on a trace writer
    // sequence. This is usually caused by exhaustion of available chunks in the
    // writer process's SMB. Note that this relies on the client's TraceWriter
    // indicating this loss to the service -- packets lost for other reasons are
    // not reflected in this stat.
    optional uint64 trace_writer_packet_loss = 19;
  }

  // Stats for the TraceBuffer(s) of the current trace session.
  repeated BufferStats buffer_stats = 1;

  // Per TraceWriter stat. Each {producer, trace writer} tuple is publicly
  // visible as a unique sequence ID in the trace.
  message WriterStats {
    // This matches the TracePacket.trusted_packet_sequence_id and is used to
    // correlate the stats with the actual packet types.
    optional uint64 sequence_id = 1;

    // These two arrays have the same cardinality and match the cardinality of
    // chunk_payload_histogram_def + 1 (for the overflow bucket, see below).
    // `sum` contains the SUM(entries) and `counts` contains the COUNT(entries)
    // for each bucket.
    repeated uint64 chunk_payload_histogram_counts = 2 [packed = true];
    repeated int64 chunk_payload_histogram_sum = 3 [packed = true];
  }

  // The thresholds of each the `writer_stats` histogram buckets. This is
  // emitted only once as all WriterStats share the same bucket layout.
  // This field has the same cardinality of the
  // `writer_stats.chunk_payload_histogram_{counts,sum}` - 1.
  // (The -1 is because the last overflow bucket is not reported in the _def).
  // An array of values [10, 100, 1000] in the _def array means that there are
  // four buckets (3 + the implicit overflow bucket):
  // [0]: x <= 10; [1]: 100 < x <= 1000; [2]: 1000 < x <= 1000; [3]: x > 1000.
  repeated int64 chunk_payload_histogram_def = 17;
  repeated WriterStats writer_stats = 18;

  // Num. producers connected (whether they are involved in the current tracing
  // session or not).
  optional uint32 producers_connected = 2;

  // Num. producers ever seen for all trace sessions since startup (it's a good
  // proxy for inferring num. producers crashed / killed).
  optional uint64 producers_seen = 3;

  // Num. data sources registered for all trace sessions.
  optional uint32 data_sources_registered = 4;

  // Num. data sources ever seen for all trace sessions since startup.
  optional uint64 data_sources_seen = 5;

  // Num. concurrently active tracing sessions.
  optional uint32 tracing_sessions = 6;

  // Num. buffers for all tracing session (not just the current one). This will
  // be >= buffer_stats.size(), because the latter is only about the current
  // session.
  optional uint32 total_buffers = 7;

  // The fields below have been introduced in Android Q.

  // Num. chunks that were discarded by the service before attempting to commit
  // them to a buffer, e.g. because the producer specified an invalid buffer ID.
  optional uint64 chunks_discarded = 8;

  // Num. patches that were discarded by the service before attempting to apply
  // them to a buffer, e.g. because the producer specified an invalid buffer ID.
  optional uint64 patches_discarded = 9;

  // Packets that failed validation of the TrustedPacket. If this is > 0, there
  // is a bug in the producer.
  optional uint64 invalid_packets = 10;

  // This is set only when the TraceConfig specifies a TraceFilter.
  message FilterStats {
    optional uint64 input_packets = 1;
    optional uint64 input_bytes = 2;
    optional uint64 output_bytes = 3;
    optional uint64 errors = 4;
  }
  optional FilterStats filter_stats = 11;

  // Count of Flush() requests (either from the Consumer, or self-induced
  // periodic flushes). The final Flush() is also included in the count.
  optional uint64 flushes_requested = 12;

  // The count of the Flush() requests that were completed successfully.
  // In a well behaving trace this should always be == `flush_requests`.
  optional uint64 flushes_succeeded = 13;

  // The count of the Flush() requests that failed (in most timed out).
  // In a well behaving trace this should always be == 0.
  optional uint64 flushes_failed = 14;

  enum FinalFlushOutcome {
    FINAL_FLUSH_UNSPECIFIED = 0;
    FINAL_FLUSH_SUCCEEDED = 1;
    FINAL_FLUSH_FAILED = 2;
  }
  optional FinalFlushOutcome final_flush_outcome = 15;
}