blob: e8754ac770555fa18e98cd62c519c6c5a988f58d [file] [log] [blame]
/*===-- llvm-c/DisassemblerTypedefs.h -----------------------------*- C -*-===*\
|* *|
|* The LLVM Compiler Infrastructure *|
|* *|
|* This file is distributed under the University of Illinois Open Source *|
|* License. See LICENSE.TXT for details. *|
|* *|
|*===----------------------------------------------------------------------===*/
#ifndef LLVM_DISASSEMBLER_TYPES_H
#define LLVM_DISASSEMBLER_TYPES_H
#include "llvm-c/DataTypes.h"
#ifdef __cplusplus
#include <cstddef>
#else
#include <stddef.h>
#endif
/**
* An opaque reference to a disassembler context.
*/
typedef void *LLVMDisasmContextRef;
/**
* The type for the operand information call back function. This is called to
* get the symbolic information for an operand of an instruction. Typically
* this is from the relocation information, symbol table, etc. That block of
* information is saved when the disassembler context is created and passed to
* the call back in the DisInfo parameter. The instruction containing operand
* is at the PC parameter. For some instruction sets, there can be more than
* one operand with symbolic information. To determine the symbolic operand
* information for each operand, the bytes for the specific operand in the
* instruction are specified by the Offset parameter and its byte widith is the
* size parameter. For instructions sets with fixed widths and one symbolic
* operand per instruction, the Offset parameter will be zero and Size parameter
* will be the instruction width. The information is returned in TagBuf and is
* Triple specific with its specific information defined by the value of
* TagType for that Triple. If symbolic information is returned the function
* returns 1, otherwise it returns 0.
*/
typedef int (*LLVMOpInfoCallback)(void *DisInfo, uint64_t PC,
uint64_t Offset, uint64_t Size,
int TagType, void *TagBuf);
/**
* The initial support in LLVM MC for the most general form of a relocatable
* expression is "AddSymbol - SubtractSymbol + Offset". For some Darwin targets
* this full form is encoded in the relocation information so that AddSymbol and
* SubtractSymbol can be link edited independent of each other. Many other
* platforms only allow a relocatable expression of the form AddSymbol + Offset
* to be encoded.
*
* The LLVMOpInfoCallback() for the TagType value of 1 uses the struct
* LLVMOpInfo1. The value of the relocatable expression for the operand,
* including any PC adjustment, is passed in to the call back in the Value
* field. The symbolic information about the operand is returned using all
* the fields of the structure with the Offset of the relocatable expression
* returned in the Value field. It is possible that some symbols in the
* relocatable expression were assembly temporary symbols, for example
* "Ldata - LpicBase + constant", and only the Values of the symbols without
* symbol names are present in the relocation information. The VariantKind
* type is one of the Target specific #defines below and is used to print
* operands like "_foo@GOT", ":lower16:_foo", etc.
*/
struct LLVMOpInfoSymbol1 {
uint64_t Present; /* 1 if this symbol is present */
const char *Name; /* symbol name if not NULL */
uint64_t Value; /* symbol value if name is NULL */
};
struct LLVMOpInfo1 {
struct LLVMOpInfoSymbol1 AddSymbol;
struct LLVMOpInfoSymbol1 SubtractSymbol;
uint64_t Value;
uint64_t VariantKind;
};
/**
* The operand VariantKinds for symbolic disassembly.
*/
#define LLVMDisassembler_VariantKind_None 0 /* all targets */
/**
* The ARM target VariantKinds.
*/
#define LLVMDisassembler_VariantKind_ARM_HI16 1 /* :upper16: */
#define LLVMDisassembler_VariantKind_ARM_LO16 2 /* :lower16: */
/**
* The ARM64 target VariantKinds.
*/
#define LLVMDisassembler_VariantKind_ARM64_PAGE 1 /* @page */
#define LLVMDisassembler_VariantKind_ARM64_PAGEOFF 2 /* @pageoff */
#define LLVMDisassembler_VariantKind_ARM64_GOTPAGE 3 /* @gotpage */
#define LLVMDisassembler_VariantKind_ARM64_GOTPAGEOFF 4 /* @gotpageoff */
#define LLVMDisassembler_VariantKind_ARM64_TLVP 5 /* @tvlppage */
#define LLVMDisassembler_VariantKind_ARM64_TLVOFF 6 /* @tvlppageoff */
/**
* The type for the symbol lookup function. This may be called by the
* disassembler for things like adding a comment for a PC plus a constant
* offset load instruction to use a symbol name instead of a load address value.
* It is passed the block information is saved when the disassembler context is
* created and the ReferenceValue to look up as a symbol. If no symbol is found
* for the ReferenceValue NULL is returned. The ReferenceType of the
* instruction is passed indirectly as is the PC of the instruction in
* ReferencePC. If the output reference can be determined its type is returned
* indirectly in ReferenceType along with ReferenceName if any, or that is set
* to NULL.
*/
typedef const char *(*LLVMSymbolLookupCallback)(void *DisInfo,
uint64_t ReferenceValue,
uint64_t *ReferenceType,
uint64_t ReferencePC,
const char **ReferenceName);
/**
* The reference types on input and output.
*/
/* No input reference type or no output reference type. */
#define LLVMDisassembler_ReferenceType_InOut_None 0
/* The input reference is from a branch instruction. */
#define LLVMDisassembler_ReferenceType_In_Branch 1
/* The input reference is from a PC relative load instruction. */
#define LLVMDisassembler_ReferenceType_In_PCrel_Load 2
/* The input reference is from an ARM64::ADRP instruction. */
#define LLVMDisassembler_ReferenceType_In_ARM64_ADRP 0x100000001
/* The input reference is from an ARM64::ADDXri instruction. */
#define LLVMDisassembler_ReferenceType_In_ARM64_ADDXri 0x100000002
/* The input reference is from an ARM64::LDRXui instruction. */
#define LLVMDisassembler_ReferenceType_In_ARM64_LDRXui 0x100000003
/* The input reference is from an ARM64::LDRXl instruction. */
#define LLVMDisassembler_ReferenceType_In_ARM64_LDRXl 0x100000004
/* The input reference is from an ARM64::ADR instruction. */
#define LLVMDisassembler_ReferenceType_In_ARM64_ADR 0x100000005
/* The output reference is to as symbol stub. */
#define LLVMDisassembler_ReferenceType_Out_SymbolStub 1
/* The output reference is to a symbol address in a literal pool. */
#define LLVMDisassembler_ReferenceType_Out_LitPool_SymAddr 2
/* The output reference is to a cstring address in a literal pool. */
#define LLVMDisassembler_ReferenceType_Out_LitPool_CstrAddr 3
/* The output reference is to a Objective-C CoreFoundation string. */
#define LLVMDisassembler_ReferenceType_Out_Objc_CFString_Ref 4
/* The output reference is to a Objective-C message. */
#define LLVMDisassembler_ReferenceType_Out_Objc_Message 5
/* The output reference is to a Objective-C message ref. */
#define LLVMDisassembler_ReferenceType_Out_Objc_Message_Ref 6
/* The output reference is to a Objective-C selector ref. */
#define LLVMDisassembler_ReferenceType_Out_Objc_Selector_Ref 7
/* The output reference is to a Objective-C class ref. */
#define LLVMDisassembler_ReferenceType_Out_Objc_Class_Ref 8
/* The output reference is to a C++ symbol name. */
#define LLVMDisassembler_ReferenceType_DeMangled_Name 9
#endif