/* openssl/engine.h */
/*
 * Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL project
 * 2000.
 */
/* ====================================================================
 * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    licensing@OpenSSL.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
/* ====================================================================
 * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
 * ECDH support in OpenSSL originally developed by
 * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
 */

#ifndef HEADER_ENGINE_H
# define HEADER_ENGINE_H

# include <openssl/opensslconf.h>

# ifdef OPENSSL_NO_ENGINE
#  error ENGINE is disabled.
# endif

# ifndef OPENSSL_NO_DEPRECATED
#  include <openssl/bn.h>
#  ifndef OPENSSL_NO_RSA
#   include <openssl/rsa.h>
#  endif
#  ifndef OPENSSL_NO_DSA
#   include <openssl/dsa.h>
#  endif
#  ifndef OPENSSL_NO_DH
#   include <openssl/dh.h>
#  endif
#  ifndef OPENSSL_NO_ECDH
#   include <openssl/ecdh.h>
#  endif
#  ifndef OPENSSL_NO_ECDSA
#   include <openssl/ecdsa.h>
#  endif
#  include <openssl/rand.h>
#  include <openssl/ui.h>
#  include <openssl/err.h>
# endif

# include <openssl/ossl_typ.h>
# include <openssl/symhacks.h>

# include <openssl/x509.h>

#ifdef  __cplusplus
extern "C" {
#endif

/*
 * These flags are used to control combinations of algorithm (methods) by
 * bitwise "OR"ing.
 */
# define ENGINE_METHOD_RSA               (unsigned int)0x0001
# define ENGINE_METHOD_DSA               (unsigned int)0x0002
# define ENGINE_METHOD_DH                (unsigned int)0x0004
# define ENGINE_METHOD_RAND              (unsigned int)0x0008
# define ENGINE_METHOD_ECDH              (unsigned int)0x0010
# define ENGINE_METHOD_ECDSA             (unsigned int)0x0020
# define ENGINE_METHOD_CIPHERS           (unsigned int)0x0040
# define ENGINE_METHOD_DIGESTS           (unsigned int)0x0080
# define ENGINE_METHOD_STORE             (unsigned int)0x0100
# define ENGINE_METHOD_PKEY_METHS        (unsigned int)0x0200
# define ENGINE_METHOD_PKEY_ASN1_METHS   (unsigned int)0x0400
/* Obvious all-or-nothing cases. */
# define ENGINE_METHOD_ALL               (unsigned int)0xFFFF
# define ENGINE_METHOD_NONE              (unsigned int)0x0000

/*
 * This(ese) flag(s) controls behaviour of the ENGINE_TABLE mechanism used
 * internally to control registration of ENGINE implementations, and can be
 * set by ENGINE_set_table_flags(). The "NOINIT" flag prevents attempts to
 * initialise registered ENGINEs if they are not already initialised.
 */
# define ENGINE_TABLE_FLAG_NOINIT        (unsigned int)0x0001

/* ENGINE flags that can be set by ENGINE_set_flags(). */
/* Not used */
/* #define ENGINE_FLAGS_MALLOCED        0x0001 */

/*
 * This flag is for ENGINEs that wish to handle the various 'CMD'-related
 * control commands on their own. Without this flag, ENGINE_ctrl() handles
 * these control commands on behalf of the ENGINE using their "cmd_defns"
 * data.
 */
# define ENGINE_FLAGS_MANUAL_CMD_CTRL    (int)0x0002

/*
 * This flag is for ENGINEs who return new duplicate structures when found
 * via "ENGINE_by_id()". When an ENGINE must store state (eg. if
 * ENGINE_ctrl() commands are called in sequence as part of some stateful
 * process like key-generation setup and execution), it can set this flag -
 * then each attempt to obtain the ENGINE will result in it being copied into
 * a new structure. Normally, ENGINEs don't declare this flag so
 * ENGINE_by_id() just increments the existing ENGINE's structural reference
 * count.
 */
# define ENGINE_FLAGS_BY_ID_COPY         (int)0x0004

/*
 * This flag if for an ENGINE that does not want its methods registered as
 * part of ENGINE_register_all_complete() for example if the methods are not
 * usable as default methods.
 */

# define ENGINE_FLAGS_NO_REGISTER_ALL    (int)0x0008

/*
 * ENGINEs can support their own command types, and these flags are used in
 * ENGINE_CTRL_GET_CMD_FLAGS to indicate to the caller what kind of input
 * each command expects. Currently only numeric and string input is
 * supported. If a control command supports none of the _NUMERIC, _STRING, or
 * _NO_INPUT options, then it is regarded as an "internal" control command -
 * and not for use in config setting situations. As such, they're not
 * available to the ENGINE_ctrl_cmd_string() function, only raw ENGINE_ctrl()
 * access. Changes to this list of 'command types' should be reflected
 * carefully in ENGINE_cmd_is_executable() and ENGINE_ctrl_cmd_string().
 */

/* accepts a 'long' input value (3rd parameter to ENGINE_ctrl) */
# define ENGINE_CMD_FLAG_NUMERIC         (unsigned int)0x0001
/*
 * accepts string input (cast from 'void*' to 'const char *', 4th parameter
 * to ENGINE_ctrl)
 */
# define ENGINE_CMD_FLAG_STRING          (unsigned int)0x0002
/*
 * Indicates that the control command takes *no* input. Ie. the control
 * command is unparameterised.
 */
# define ENGINE_CMD_FLAG_NO_INPUT        (unsigned int)0x0004
/*
 * Indicates that the control command is internal. This control command won't
 * be shown in any output, and is only usable through the ENGINE_ctrl_cmd()
 * function.
 */
# define ENGINE_CMD_FLAG_INTERNAL        (unsigned int)0x0008

/*
 * NB: These 3 control commands are deprecated and should not be used.
 * ENGINEs relying on these commands should compile conditional support for
 * compatibility (eg. if these symbols are defined) but should also migrate
 * the same functionality to their own ENGINE-specific control functions that
 * can be "discovered" by calling applications. The fact these control
 * commands wouldn't be "executable" (ie. usable by text-based config)
 * doesn't change the fact that application code can find and use them
 * without requiring per-ENGINE hacking.
 */

/*
 * These flags are used to tell the ctrl function what should be done. All
 * command numbers are shared between all engines, even if some don't make
 * sense to some engines.  In such a case, they do nothing but return the
 * error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED.
 */
# define ENGINE_CTRL_SET_LOGSTREAM               1
# define ENGINE_CTRL_SET_PASSWORD_CALLBACK       2
# define ENGINE_CTRL_HUP                         3/* Close and reinitialise
                                                   * any handles/connections
                                                   * etc. */
# define ENGINE_CTRL_SET_USER_INTERFACE          4/* Alternative to callback */
# define ENGINE_CTRL_SET_CALLBACK_DATA           5/* User-specific data, used
                                                   * when calling the password
                                                   * callback and the user
                                                   * interface */
# define ENGINE_CTRL_LOAD_CONFIGURATION          6/* Load a configuration,
                                                   * given a string that
                                                   * represents a file name
                                                   * or so */
# define ENGINE_CTRL_LOAD_SECTION                7/* Load data from a given
                                                   * section in the already
                                                   * loaded configuration */

/*
 * These control commands allow an application to deal with an arbitrary
 * engine in a dynamic way. Warn: Negative return values indicate errors FOR
 * THESE COMMANDS because zero is used to indicate 'end-of-list'. Other
 * commands, including ENGINE-specific command types, return zero for an
 * error. An ENGINE can choose to implement these ctrl functions, and can
 * internally manage things however it chooses - it does so by setting the
 * ENGINE_FLAGS_MANUAL_CMD_CTRL flag (using ENGINE_set_flags()). Otherwise
 * the ENGINE_ctrl() code handles this on the ENGINE's behalf using the
 * cmd_defns data (set using ENGINE_set_cmd_defns()). This means an ENGINE's
 * ctrl() handler need only implement its own commands - the above "meta"
 * commands will be taken care of.
 */

/*
 * Returns non-zero if the supplied ENGINE has a ctrl() handler. If "not",
 * then all the remaining control commands will return failure, so it is
 * worth checking this first if the caller is trying to "discover" the
 * engine's capabilities and doesn't want errors generated unnecessarily.
 */
# define ENGINE_CTRL_HAS_CTRL_FUNCTION           10
/*
 * Returns a positive command number for the first command supported by the
 * engine. Returns zero if no ctrl commands are supported.
 */
# define ENGINE_CTRL_GET_FIRST_CMD_TYPE          11
/*
 * The 'long' argument specifies a command implemented by the engine, and the
 * return value is the next command supported, or zero if there are no more.
 */
# define ENGINE_CTRL_GET_NEXT_CMD_TYPE           12
/*
 * The 'void*' argument is a command name (cast from 'const char *'), and the
 * return value is the command that corresponds to it.
 */
# define ENGINE_CTRL_GET_CMD_FROM_NAME           13
/*
 * The next two allow a command to be converted into its corresponding string
 * form. In each case, the 'long' argument supplies the command. In the
 * NAME_LEN case, the return value is the length of the command name (not
 * counting a trailing EOL). In the NAME case, the 'void*' argument must be a
 * string buffer large enough, and it will be populated with the name of the
 * command (WITH a trailing EOL).
 */
# define ENGINE_CTRL_GET_NAME_LEN_FROM_CMD       14
# define ENGINE_CTRL_GET_NAME_FROM_CMD           15
/* The next two are similar but give a "short description" of a command. */
# define ENGINE_CTRL_GET_DESC_LEN_FROM_CMD       16
# define ENGINE_CTRL_GET_DESC_FROM_CMD           17
/*
 * With this command, the return value is the OR'd combination of
 * ENGINE_CMD_FLAG_*** values that indicate what kind of input a given
 * engine-specific ctrl command expects.
 */
# define ENGINE_CTRL_GET_CMD_FLAGS               18

/*
 * ENGINE implementations should start the numbering of their own control
 * commands from this value. (ie. ENGINE_CMD_BASE, ENGINE_CMD_BASE + 1, etc).
 */
# define ENGINE_CMD_BASE                         200

/*
 * NB: These 2 nCipher "chil" control commands are deprecated, and their
 * functionality is now available through ENGINE-specific control commands
 * (exposed through the above-mentioned 'CMD'-handling). Code using these 2
 * commands should be migrated to the more general command handling before
 * these are removed.
 */

/* Flags specific to the nCipher "chil" engine */
# define ENGINE_CTRL_CHIL_SET_FORKCHECK          100
        /*
         * Depending on the value of the (long)i argument, this sets or
         * unsets the SimpleForkCheck flag in the CHIL API to enable or
         * disable checking and workarounds for applications that fork().
         */
# define ENGINE_CTRL_CHIL_NO_LOCKING             101
        /*
         * This prevents the initialisation function from providing mutex
         * callbacks to the nCipher library.
         */

/*
 * If an ENGINE supports its own specific control commands and wishes the
 * framework to handle the above 'ENGINE_CMD_***'-manipulation commands on
 * its behalf, it should supply a null-terminated array of ENGINE_CMD_DEFN
 * entries to ENGINE_set_cmd_defns(). It should also implement a ctrl()
 * handler that supports the stated commands (ie. the "cmd_num" entries as
 * described by the array). NB: The array must be ordered in increasing order
 * of cmd_num. "null-terminated" means that the last ENGINE_CMD_DEFN element
 * has cmd_num set to zero and/or cmd_name set to NULL.
 */
typedef struct ENGINE_CMD_DEFN_st {
    unsigned int cmd_num;       /* The command number */
    const char *cmd_name;       /* The command name itself */
    const char *cmd_desc;       /* A short description of the command */
    unsigned int cmd_flags;     /* The input the command expects */
} ENGINE_CMD_DEFN;

/* Generic function pointer */
typedef int (*ENGINE_GEN_FUNC_PTR) (void);
/* Generic function pointer taking no arguments */
typedef int (*ENGINE_GEN_INT_FUNC_PTR) (ENGINE *);
/* Specific control function pointer */
typedef int (*ENGINE_CTRL_FUNC_PTR) (ENGINE *, int, long, void *,
                                     void (*f) (void));
/* Generic load_key function pointer */
typedef EVP_PKEY *(*ENGINE_LOAD_KEY_PTR)(ENGINE *, const char *,
                                         UI_METHOD *ui_method,
                                         void *callback_data);
typedef int (*ENGINE_SSL_CLIENT_CERT_PTR) (ENGINE *, SSL *ssl,
                                           STACK_OF(X509_NAME) *ca_dn,
                                           X509 **pcert, EVP_PKEY **pkey,
                                           STACK_OF(X509) **pother,
                                           UI_METHOD *ui_method,
                                           void *callback_data);
/*-
 * These callback types are for an ENGINE's handler for cipher and digest logic.
 * These handlers have these prototypes;
 *   int foo(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid);
 *   int foo(ENGINE *e, const EVP_MD **digest, const int **nids, int nid);
 * Looking at how to implement these handlers in the case of cipher support, if
 * the framework wants the EVP_CIPHER for 'nid', it will call;
 *   foo(e, &p_evp_cipher, NULL, nid);    (return zero for failure)
 * If the framework wants a list of supported 'nid's, it will call;
 *   foo(e, NULL, &p_nids, 0); (returns number of 'nids' or -1 for error)
 */
/*
 * Returns to a pointer to the array of supported cipher 'nid's. If the
 * second parameter is non-NULL it is set to the size of the returned array.
 */
typedef int (*ENGINE_CIPHERS_PTR) (ENGINE *, const EVP_CIPHER **,
                                   const int **, int);
typedef int (*ENGINE_DIGESTS_PTR) (ENGINE *, const EVP_MD **, const int **,
                                   int);
typedef int (*ENGINE_PKEY_METHS_PTR) (ENGINE *, EVP_PKEY_METHOD **,
                                      const int **, int);
typedef int (*ENGINE_PKEY_ASN1_METHS_PTR) (ENGINE *, EVP_PKEY_ASN1_METHOD **,
                                           const int **, int);
/*
 * STRUCTURE functions ... all of these functions deal with pointers to
 * ENGINE structures where the pointers have a "structural reference". This
 * means that their reference is to allowed access to the structure but it
 * does not imply that the structure is functional. To simply increment or
 * decrement the structural reference count, use ENGINE_by_id and
 * ENGINE_free. NB: This is not required when iterating using ENGINE_get_next
 * as it will automatically decrement the structural reference count of the
 * "current" ENGINE and increment the structural reference count of the
 * ENGINE it returns (unless it is NULL).
 */

/* Get the first/last "ENGINE" type available. */
ENGINE *ENGINE_get_first(void);
ENGINE *ENGINE_get_last(void);
/* Iterate to the next/previous "ENGINE" type (NULL = end of the list). */
ENGINE *ENGINE_get_next(ENGINE *e);
ENGINE *ENGINE_get_prev(ENGINE *e);
/* Add another "ENGINE" type into the array. */
int ENGINE_add(ENGINE *e);
/* Remove an existing "ENGINE" type from the array. */
int ENGINE_remove(ENGINE *e);
/* Retrieve an engine from the list by its unique "id" value. */
ENGINE *ENGINE_by_id(const char *id);
/* Add all the built-in engines. */
void ENGINE_load_openssl(void);
void ENGINE_load_dynamic(void);
# ifndef OPENSSL_NO_STATIC_ENGINE
void ENGINE_load_4758cca(void);
void ENGINE_load_aep(void);
void ENGINE_load_atalla(void);
void ENGINE_load_chil(void);
void ENGINE_load_cswift(void);
void ENGINE_load_nuron(void);
void ENGINE_load_sureware(void);
void ENGINE_load_ubsec(void);
void ENGINE_load_padlock(void);
void ENGINE_load_capi(void);
#  ifndef OPENSSL_NO_GMP
void ENGINE_load_gmp(void);
#  endif
#  ifndef OPENSSL_NO_GOST
void ENGINE_load_gost(void);
#  endif
# endif
void ENGINE_load_cryptodev(void);
void ENGINE_load_rsax(void);
void ENGINE_load_rdrand(void);
void ENGINE_load_builtin_engines(void);

/*
 * Get and set global flags (ENGINE_TABLE_FLAG_***) for the implementation
 * "registry" handling.
 */
unsigned int ENGINE_get_table_flags(void);
void ENGINE_set_table_flags(unsigned int flags);

/*- Manage registration of ENGINEs per "table". For each type, there are 3
 * functions;
 *   ENGINE_register_***(e) - registers the implementation from 'e' (if it has one)
 *   ENGINE_unregister_***(e) - unregister the implementation from 'e'
 *   ENGINE_register_all_***() - call ENGINE_register_***() for each 'e' in the list
 * Cleanup is automatically registered from each table when required, so
 * ENGINE_cleanup() will reverse any "register" operations.
 */

int ENGINE_register_RSA(ENGINE *e);
void ENGINE_unregister_RSA(ENGINE *e);
void ENGINE_register_all_RSA(void);

int ENGINE_register_DSA(ENGINE *e);
void ENGINE_unregister_DSA(ENGINE *e);
void ENGINE_register_all_DSA(void);

int ENGINE_register_ECDH(ENGINE *e);
void ENGINE_unregister_ECDH(ENGINE *e);
void ENGINE_register_all_ECDH(void);

int ENGINE_register_ECDSA(ENGINE *e);
void ENGINE_unregister_ECDSA(ENGINE *e);
void ENGINE_register_all_ECDSA(void);

int ENGINE_register_DH(ENGINE *e);
void ENGINE_unregister_DH(ENGINE *e);
void ENGINE_register_all_DH(void);

int ENGINE_register_RAND(ENGINE *e);
void ENGINE_unregister_RAND(ENGINE *e);
void ENGINE_register_all_RAND(void);

int ENGINE_register_STORE(ENGINE *e);
void ENGINE_unregister_STORE(ENGINE *e);
void ENGINE_register_all_STORE(void);

int ENGINE_register_ciphers(ENGINE *e);
void ENGINE_unregister_ciphers(ENGINE *e);
void ENGINE_register_all_ciphers(void);

int ENGINE_register_digests(ENGINE *e);
void ENGINE_unregister_digests(ENGINE *e);
void ENGINE_register_all_digests(void);

int ENGINE_register_pkey_meths(ENGINE *e);
void ENGINE_unregister_pkey_meths(ENGINE *e);
void ENGINE_register_all_pkey_meths(void);

int ENGINE_register_pkey_asn1_meths(ENGINE *e);
void ENGINE_unregister_pkey_asn1_meths(ENGINE *e);
void ENGINE_register_all_pkey_asn1_meths(void);

/*
 * These functions register all support from the above categories. Note, use
 * of these functions can result in static linkage of code your application
 * may not need. If you only need a subset of functionality, consider using
 * more selective initialisation.
 */
int ENGINE_register_complete(ENGINE *e);
int ENGINE_register_all_complete(void);

/*
 * Send parametrised control commands to the engine. The possibilities to
 * send down an integer, a pointer to data or a function pointer are
 * provided. Any of the parameters may or may not be NULL, depending on the
 * command number. In actuality, this function only requires a structural
 * (rather than functional) reference to an engine, but many control commands
 * may require the engine be functional. The caller should be aware of trying
 * commands that require an operational ENGINE, and only use functional
 * references in such situations.
 */
int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f) (void));

/*
 * This function tests if an ENGINE-specific command is usable as a
 * "setting". Eg. in an application's config file that gets processed through
 * ENGINE_ctrl_cmd_string(). If this returns zero, it is not available to
 * ENGINE_ctrl_cmd_string(), only ENGINE_ctrl().
 */
int ENGINE_cmd_is_executable(ENGINE *e, int cmd);

/*
 * This function works like ENGINE_ctrl() with the exception of taking a
 * command name instead of a command number, and can handle optional
 * commands. See the comment on ENGINE_ctrl_cmd_string() for an explanation
 * on how to use the cmd_name and cmd_optional.
 */
int ENGINE_ctrl_cmd(ENGINE *e, const char *cmd_name,
                    long i, void *p, void (*f) (void), int cmd_optional);

/*
 * This function passes a command-name and argument to an ENGINE. The
 * cmd_name is converted to a command number and the control command is
 * called using 'arg' as an argument (unless the ENGINE doesn't support such
 * a command, in which case no control command is called). The command is
 * checked for input flags, and if necessary the argument will be converted
 * to a numeric value. If cmd_optional is non-zero, then if the ENGINE
 * doesn't support the given cmd_name the return value will be success
 * anyway. This function is intended for applications to use so that users
 * (or config files) can supply engine-specific config data to the ENGINE at
 * run-time to control behaviour of specific engines. As such, it shouldn't
 * be used for calling ENGINE_ctrl() functions that return data, deal with
 * binary data, or that are otherwise supposed to be used directly through
 * ENGINE_ctrl() in application code. Any "return" data from an ENGINE_ctrl()
 * operation in this function will be lost - the return value is interpreted
 * as failure if the return value is zero, success otherwise, and this
 * function returns a boolean value as a result. In other words, vendors of
 * 'ENGINE'-enabled devices should write ENGINE implementations with
 * parameterisations that work in this scheme, so that compliant ENGINE-based
 * applications can work consistently with the same configuration for the
 * same ENGINE-enabled devices, across applications.
 */
int ENGINE_ctrl_cmd_string(ENGINE *e, const char *cmd_name, const char *arg,
                           int cmd_optional);

/*
 * These functions are useful for manufacturing new ENGINE structures. They
 * don't address reference counting at all - one uses them to populate an
 * ENGINE structure with personalised implementations of things prior to
 * using it directly or adding it to the builtin ENGINE list in OpenSSL.
 * These are also here so that the ENGINE structure doesn't have to be
 * exposed and break binary compatibility!
 */
ENGINE *ENGINE_new(void);
int ENGINE_free(ENGINE *e);
int ENGINE_up_ref(ENGINE *e);
int ENGINE_set_id(ENGINE *e, const char *id);
int ENGINE_set_name(ENGINE *e, const char *name);
int ENGINE_set_RSA(ENGINE *e, const RSA_METHOD *rsa_meth);
int ENGINE_set_DSA(ENGINE *e, const DSA_METHOD *dsa_meth);
int ENGINE_set_ECDH(ENGINE *e, const ECDH_METHOD *ecdh_meth);
int ENGINE_set_ECDSA(ENGINE *e, const ECDSA_METHOD *ecdsa_meth);
int ENGINE_set_DH(ENGINE *e, const DH_METHOD *dh_meth);
int ENGINE_set_RAND(ENGINE *e, const RAND_METHOD *rand_meth);
int ENGINE_set_STORE(ENGINE *e, const STORE_METHOD *store_meth);
int ENGINE_set_destroy_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR destroy_f);
int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f);
int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f);
int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f);
int ENGINE_set_load_privkey_function(ENGINE *e,
                                     ENGINE_LOAD_KEY_PTR loadpriv_f);
int ENGINE_set_load_pubkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpub_f);
int ENGINE_set_load_ssl_client_cert_function(ENGINE *e,
                                             ENGINE_SSL_CLIENT_CERT_PTR
                                             loadssl_f);
int ENGINE_set_ciphers(ENGINE *e, ENGINE_CIPHERS_PTR f);
int ENGINE_set_digests(ENGINE *e, ENGINE_DIGESTS_PTR f);
int ENGINE_set_pkey_meths(ENGINE *e, ENGINE_PKEY_METHS_PTR f);
int ENGINE_set_pkey_asn1_meths(ENGINE *e, ENGINE_PKEY_ASN1_METHS_PTR f);
int ENGINE_set_flags(ENGINE *e, int flags);
int ENGINE_set_cmd_defns(ENGINE *e, const ENGINE_CMD_DEFN *defns);
/* These functions allow control over any per-structure ENGINE data. */
int ENGINE_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
                            CRYPTO_EX_dup *dup_func,
                            CRYPTO_EX_free *free_func);
int ENGINE_set_ex_data(ENGINE *e, int idx, void *arg);
void *ENGINE_get_ex_data(const ENGINE *e, int idx);

/*
 * This function cleans up anything that needs it. Eg. the ENGINE_add()
 * function automatically ensures the list cleanup function is registered to
 * be called from ENGINE_cleanup(). Similarly, all ENGINE_register_***
 * functions ensure ENGINE_cleanup() will clean up after them.
 */
void ENGINE_cleanup(void);

/*
 * These return values from within the ENGINE structure. These can be useful
 * with functional references as well as structural references - it depends
 * which you obtained. Using the result for functional purposes if you only
 * obtained a structural reference may be problematic!
 */
const char *ENGINE_get_id(const ENGINE *e);
const char *ENGINE_get_name(const ENGINE *e);
const RSA_METHOD *ENGINE_get_RSA(const ENGINE *e);
const DSA_METHOD *ENGINE_get_DSA(const ENGINE *e);
const ECDH_METHOD *ENGINE_get_ECDH(const ENGINE *e);
const ECDSA_METHOD *ENGINE_get_ECDSA(const ENGINE *e);
const DH_METHOD *ENGINE_get_DH(const ENGINE *e);
const RAND_METHOD *ENGINE_get_RAND(const ENGINE *e);
const STORE_METHOD *ENGINE_get_STORE(const ENGINE *e);
ENGINE_GEN_INT_FUNC_PTR ENGINE_get_destroy_function(const ENGINE *e);
ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(const ENGINE *e);
ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(const ENGINE *e);
ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(const ENGINE *e);
ENGINE_LOAD_KEY_PTR ENGINE_get_load_privkey_function(const ENGINE *e);
ENGINE_LOAD_KEY_PTR ENGINE_get_load_pubkey_function(const ENGINE *e);
ENGINE_SSL_CLIENT_CERT_PTR ENGINE_get_ssl_client_cert_function(const ENGINE
                                                               *e);
ENGINE_CIPHERS_PTR ENGINE_get_ciphers(const ENGINE *e);
ENGINE_DIGESTS_PTR ENGINE_get_digests(const ENGINE *e);
ENGINE_PKEY_METHS_PTR ENGINE_get_pkey_meths(const ENGINE *e);
ENGINE_PKEY_ASN1_METHS_PTR ENGINE_get_pkey_asn1_meths(const ENGINE *e);
const EVP_CIPHER *ENGINE_get_cipher(ENGINE *e, int nid);
const EVP_MD *ENGINE_get_digest(ENGINE *e, int nid);
const EVP_PKEY_METHOD *ENGINE_get_pkey_meth(ENGINE *e, int nid);
const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth(ENGINE *e, int nid);
const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth_str(ENGINE *e,
                                                          const char *str,
                                                          int len);
const EVP_PKEY_ASN1_METHOD *ENGINE_pkey_asn1_find_str(ENGINE **pe,
                                                      const char *str,
                                                      int len);
const ENGINE_CMD_DEFN *ENGINE_get_cmd_defns(const ENGINE *e);
int ENGINE_get_flags(const ENGINE *e);

/*
 * FUNCTIONAL functions. These functions deal with ENGINE structures that
 * have (or will) be initialised for use. Broadly speaking, the structural
 * functions are useful for iterating the list of available engine types,
 * creating new engine types, and other "list" operations. These functions
 * actually deal with ENGINEs that are to be used. As such these functions
 * can fail (if applicable) when particular engines are unavailable - eg. if
 * a hardware accelerator is not attached or not functioning correctly. Each
 * ENGINE has 2 reference counts; structural and functional. Every time a
 * functional reference is obtained or released, a corresponding structural
 * reference is automatically obtained or released too.
 */

/*
 * Initialise a engine type for use (or up its reference count if it's
 * already in use). This will fail if the engine is not currently operational
 * and cannot initialise.
 */
int ENGINE_init(ENGINE *e);
/*
 * Free a functional reference to a engine type. This does not require a
 * corresponding call to ENGINE_free as it also releases a structural
 * reference.
 */
int ENGINE_finish(ENGINE *e);

/*
 * The following functions handle keys that are stored in some secondary
 * location, handled by the engine.  The storage may be on a card or
 * whatever.
 */
EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
                                  UI_METHOD *ui_method, void *callback_data);
EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
                                 UI_METHOD *ui_method, void *callback_data);
int ENGINE_load_ssl_client_cert(ENGINE *e, SSL *s,
                                STACK_OF(X509_NAME) *ca_dn, X509 **pcert,
                                EVP_PKEY **ppkey, STACK_OF(X509) **pother,
                                UI_METHOD *ui_method, void *callback_data);

/*
 * This returns a pointer for the current ENGINE structure that is (by
 * default) performing any RSA operations. The value returned is an
 * incremented reference, so it should be free'd (ENGINE_finish) before it is
 * discarded.
 */
ENGINE *ENGINE_get_default_RSA(void);
/* Same for the other "methods" */
ENGINE *ENGINE_get_default_DSA(void);
ENGINE *ENGINE_get_default_ECDH(void);
ENGINE *ENGINE_get_default_ECDSA(void);
ENGINE *ENGINE_get_default_DH(void);
ENGINE *ENGINE_get_default_RAND(void);
/*
 * These functions can be used to get a functional reference to perform
 * ciphering or digesting corresponding to "nid".
 */
ENGINE *ENGINE_get_cipher_engine(int nid);
ENGINE *ENGINE_get_digest_engine(int nid);
ENGINE *ENGINE_get_pkey_meth_engine(int nid);
ENGINE *ENGINE_get_pkey_asn1_meth_engine(int nid);

/*
 * This sets a new default ENGINE structure for performing RSA operations. If
 * the result is non-zero (success) then the ENGINE structure will have had
 * its reference count up'd so the caller should still free their own
 * reference 'e'.
 */
int ENGINE_set_default_RSA(ENGINE *e);
int ENGINE_set_default_string(ENGINE *e, const char *def_list);
/* Same for the other "methods" */
int ENGINE_set_default_DSA(ENGINE *e);
int ENGINE_set_default_ECDH(ENGINE *e);
int ENGINE_set_default_ECDSA(ENGINE *e);
int ENGINE_set_default_DH(ENGINE *e);
int ENGINE_set_default_RAND(ENGINE *e);
int ENGINE_set_default_ciphers(ENGINE *e);
int ENGINE_set_default_digests(ENGINE *e);
int ENGINE_set_default_pkey_meths(ENGINE *e);
int ENGINE_set_default_pkey_asn1_meths(ENGINE *e);

/*
 * The combination "set" - the flags are bitwise "OR"d from the
 * ENGINE_METHOD_*** defines above. As with the "ENGINE_register_complete()"
 * function, this function can result in unnecessary static linkage. If your
 * application requires only specific functionality, consider using more
 * selective functions.
 */
int ENGINE_set_default(ENGINE *e, unsigned int flags);

void ENGINE_add_conf_module(void);

/* Deprecated functions ... */
/* int ENGINE_clear_defaults(void); */

/**************************/
/* DYNAMIC ENGINE SUPPORT */
/**************************/

/* Binary/behaviour compatibility levels */
# define OSSL_DYNAMIC_VERSION            (unsigned long)0x00020000
/*
 * Binary versions older than this are too old for us (whether we're a loader
 * or a loadee)
 */
# define OSSL_DYNAMIC_OLDEST             (unsigned long)0x00020000

/*
 * When compiling an ENGINE entirely as an external shared library, loadable
 * by the "dynamic" ENGINE, these types are needed. The 'dynamic_fns'
 * structure type provides the calling application's (or library's) error
 * functionality and memory management function pointers to the loaded
 * library. These should be used/set in the loaded library code so that the
 * loading application's 'state' will be used/changed in all operations. The
 * 'static_state' pointer allows the loaded library to know if it shares the
 * same static data as the calling application (or library), and thus whether
 * these callbacks need to be set or not.
 */
typedef void *(*dyn_MEM_malloc_cb) (size_t);
typedef void *(*dyn_MEM_realloc_cb) (void *, size_t);
typedef void (*dyn_MEM_free_cb) (void *);
typedef struct st_dynamic_MEM_fns {
    dyn_MEM_malloc_cb malloc_cb;
    dyn_MEM_realloc_cb realloc_cb;
    dyn_MEM_free_cb free_cb;
} dynamic_MEM_fns;
/*
 * FIXME: Perhaps the memory and locking code (crypto.h) should declare and
 * use these types so we (and any other dependant code) can simplify a bit??
 */
typedef void (*dyn_lock_locking_cb) (int, int, const char *, int);
typedef int (*dyn_lock_add_lock_cb) (int *, int, int, const char *, int);
typedef struct CRYPTO_dynlock_value *(*dyn_dynlock_create_cb) (const char *,
                                                               int);
typedef void (*dyn_dynlock_lock_cb) (int, struct CRYPTO_dynlock_value *,
                                     const char *, int);
typedef void (*dyn_dynlock_destroy_cb) (struct CRYPTO_dynlock_value *,
                                        const char *, int);
typedef struct st_dynamic_LOCK_fns {
    dyn_lock_locking_cb lock_locking_cb;
    dyn_lock_add_lock_cb lock_add_lock_cb;
    dyn_dynlock_create_cb dynlock_create_cb;
    dyn_dynlock_lock_cb dynlock_lock_cb;
    dyn_dynlock_destroy_cb dynlock_destroy_cb;
} dynamic_LOCK_fns;
/* The top-level structure */
typedef struct st_dynamic_fns {
    void *static_state;
    const ERR_FNS *err_fns;
    const CRYPTO_EX_DATA_IMPL *ex_data_fns;
    dynamic_MEM_fns mem_fns;
    dynamic_LOCK_fns lock_fns;
} dynamic_fns;

/*
 * The version checking function should be of this prototype. NB: The
 * ossl_version value passed in is the OSSL_DYNAMIC_VERSION of the loading
 * code. If this function returns zero, it indicates a (potential) version
 * incompatibility and the loaded library doesn't believe it can proceed.
 * Otherwise, the returned value is the (latest) version supported by the
 * loading library. The loader may still decide that the loaded code's
 * version is unsatisfactory and could veto the load. The function is
 * expected to be implemented with the symbol name "v_check", and a default
 * implementation can be fully instantiated with
 * IMPLEMENT_DYNAMIC_CHECK_FN().
 */
typedef unsigned long (*dynamic_v_check_fn) (unsigned long ossl_version);
# define IMPLEMENT_DYNAMIC_CHECK_FN() \
        OPENSSL_EXPORT unsigned long v_check(unsigned long v); \
        OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \
                if(v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \
                return 0; }

/*
 * This function is passed the ENGINE structure to initialise with its own
 * function and command settings. It should not adjust the structural or
 * functional reference counts. If this function returns zero, (a) the load
 * will be aborted, (b) the previous ENGINE state will be memcpy'd back onto
 * the structure, and (c) the shared library will be unloaded. So
 * implementations should do their own internal cleanup in failure
 * circumstances otherwise they could leak. The 'id' parameter, if non-NULL,
 * represents the ENGINE id that the loader is looking for. If this is NULL,
 * the shared library can choose to return failure or to initialise a
 * 'default' ENGINE. If non-NULL, the shared library must initialise only an
 * ENGINE matching the passed 'id'. The function is expected to be
 * implemented with the symbol name "bind_engine". A standard implementation
 * can be instantiated with IMPLEMENT_DYNAMIC_BIND_FN(fn) where the parameter
 * 'fn' is a callback function that populates the ENGINE structure and
 * returns an int value (zero for failure). 'fn' should have prototype;
 * [static] int fn(ENGINE *e, const char *id);
 */
typedef int (*dynamic_bind_engine) (ENGINE *e, const char *id,
                                    const dynamic_fns *fns);
# define IMPLEMENT_DYNAMIC_BIND_FN(fn) \
        OPENSSL_EXPORT \
        int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns); \
        OPENSSL_EXPORT \
        int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { \
                if(ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \
                if(!CRYPTO_set_mem_functions(fns->mem_fns.malloc_cb, \
                        fns->mem_fns.realloc_cb, fns->mem_fns.free_cb)) \
                        return 0; \
                CRYPTO_set_locking_callback(fns->lock_fns.lock_locking_cb); \
                CRYPTO_set_add_lock_callback(fns->lock_fns.lock_add_lock_cb); \
                CRYPTO_set_dynlock_create_callback(fns->lock_fns.dynlock_create_cb); \
                CRYPTO_set_dynlock_lock_callback(fns->lock_fns.dynlock_lock_cb); \
                CRYPTO_set_dynlock_destroy_callback(fns->lock_fns.dynlock_destroy_cb); \
                if(!CRYPTO_set_ex_data_implementation(fns->ex_data_fns)) \
                        return 0; \
                if(!ERR_set_implementation(fns->err_fns)) return 0; \
        skip_cbs: \
                if(!fn(e,id)) return 0; \
                return 1; }

/*
 * If the loading application (or library) and the loaded ENGINE library
 * share the same static data (eg. they're both dynamically linked to the
 * same libcrypto.so) we need a way to avoid trying to set system callbacks -
 * this would fail, and for the same reason that it's unnecessary to try. If
 * the loaded ENGINE has (or gets from through the loader) its own copy of
 * the libcrypto static data, we will need to set the callbacks. The easiest
 * way to detect this is to have a function that returns a pointer to some
 * static data and let the loading application and loaded ENGINE compare
 * their respective values.
 */
void *ENGINE_get_static_state(void);

# if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
void ENGINE_setup_bsd_cryptodev(void);
# endif

/* BEGIN ERROR CODES */
/*
 * The following lines are auto generated by the script mkerr.pl. Any changes
 * made after this point may be overwritten when the script is next run.
 */
void ERR_load_ENGINE_strings(void);

/* Error codes for the ENGINE functions. */

/* Function codes. */
# define ENGINE_F_DYNAMIC_CTRL                            180
# define ENGINE_F_DYNAMIC_GET_DATA_CTX                    181
# define ENGINE_F_DYNAMIC_LOAD                            182
# define ENGINE_F_DYNAMIC_SET_DATA_CTX                    183
# define ENGINE_F_ENGINE_ADD                              105
# define ENGINE_F_ENGINE_BY_ID                            106
# define ENGINE_F_ENGINE_CMD_IS_EXECUTABLE                170
# define ENGINE_F_ENGINE_CTRL                             142
# define ENGINE_F_ENGINE_CTRL_CMD                         178
# define ENGINE_F_ENGINE_CTRL_CMD_STRING                  171
# define ENGINE_F_ENGINE_FINISH                           107
# define ENGINE_F_ENGINE_FREE_UTIL                        108
# define ENGINE_F_ENGINE_GET_CIPHER                       185
# define ENGINE_F_ENGINE_GET_DEFAULT_TYPE                 177
# define ENGINE_F_ENGINE_GET_DIGEST                       186
# define ENGINE_F_ENGINE_GET_NEXT                         115
# define ENGINE_F_ENGINE_GET_PKEY_ASN1_METH               193
# define ENGINE_F_ENGINE_GET_PKEY_METH                    192
# define ENGINE_F_ENGINE_GET_PREV                         116
# define ENGINE_F_ENGINE_INIT                             119
# define ENGINE_F_ENGINE_LIST_ADD                         120
# define ENGINE_F_ENGINE_LIST_REMOVE                      121
# define ENGINE_F_ENGINE_LOAD_PRIVATE_KEY                 150
# define ENGINE_F_ENGINE_LOAD_PUBLIC_KEY                  151
# define ENGINE_F_ENGINE_LOAD_SSL_CLIENT_CERT             194
# define ENGINE_F_ENGINE_NEW                              122
# define ENGINE_F_ENGINE_REMOVE                           123
# define ENGINE_F_ENGINE_SET_DEFAULT_STRING               189
# define ENGINE_F_ENGINE_SET_DEFAULT_TYPE                 126
# define ENGINE_F_ENGINE_SET_ID                           129
# define ENGINE_F_ENGINE_SET_NAME                         130
# define ENGINE_F_ENGINE_TABLE_REGISTER                   184
# define ENGINE_F_ENGINE_UNLOAD_KEY                       152
# define ENGINE_F_ENGINE_UNLOCKED_FINISH                  191
# define ENGINE_F_ENGINE_UP_REF                           190
# define ENGINE_F_INT_CTRL_HELPER                         172
# define ENGINE_F_INT_ENGINE_CONFIGURE                    188
# define ENGINE_F_INT_ENGINE_MODULE_INIT                  187
# define ENGINE_F_LOG_MESSAGE                             141

/* Reason codes. */
# define ENGINE_R_ALREADY_LOADED                          100
# define ENGINE_R_ARGUMENT_IS_NOT_A_NUMBER                133
# define ENGINE_R_CMD_NOT_EXECUTABLE                      134
# define ENGINE_R_COMMAND_TAKES_INPUT                     135
# define ENGINE_R_COMMAND_TAKES_NO_INPUT                  136
# define ENGINE_R_CONFLICTING_ENGINE_ID                   103
# define ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED            119
# define ENGINE_R_DH_NOT_IMPLEMENTED                      139
# define ENGINE_R_DSA_NOT_IMPLEMENTED                     140
# define ENGINE_R_DSO_FAILURE                             104
# define ENGINE_R_DSO_NOT_FOUND                           132
# define ENGINE_R_ENGINES_SECTION_ERROR                   148
# define ENGINE_R_ENGINE_CONFIGURATION_ERROR              102
# define ENGINE_R_ENGINE_IS_NOT_IN_LIST                   105
# define ENGINE_R_ENGINE_SECTION_ERROR                    149
# define ENGINE_R_FAILED_LOADING_PRIVATE_KEY              128
# define ENGINE_R_FAILED_LOADING_PUBLIC_KEY               129
# define ENGINE_R_FINISH_FAILED                           106
# define ENGINE_R_GET_HANDLE_FAILED                       107
# define ENGINE_R_ID_OR_NAME_MISSING                      108
# define ENGINE_R_INIT_FAILED                             109
# define ENGINE_R_INTERNAL_LIST_ERROR                     110
# define ENGINE_R_INVALID_ARGUMENT                        143
# define ENGINE_R_INVALID_CMD_NAME                        137
# define ENGINE_R_INVALID_CMD_NUMBER                      138
# define ENGINE_R_INVALID_INIT_VALUE                      151
# define ENGINE_R_INVALID_STRING                          150
# define ENGINE_R_NOT_INITIALISED                         117
# define ENGINE_R_NOT_LOADED                              112
# define ENGINE_R_NO_CONTROL_FUNCTION                     120
# define ENGINE_R_NO_INDEX                                144
# define ENGINE_R_NO_LOAD_FUNCTION                        125
# define ENGINE_R_NO_REFERENCE                            130
# define ENGINE_R_NO_SUCH_ENGINE                          116
# define ENGINE_R_NO_UNLOAD_FUNCTION                      126
# define ENGINE_R_PROVIDE_PARAMETERS                      113
# define ENGINE_R_RSA_NOT_IMPLEMENTED                     141
# define ENGINE_R_UNIMPLEMENTED_CIPHER                    146
# define ENGINE_R_UNIMPLEMENTED_DIGEST                    147
# define ENGINE_R_UNIMPLEMENTED_PUBLIC_KEY_METHOD         101
# define ENGINE_R_VERSION_INCOMPATIBILITY                 145

#ifdef  __cplusplus
}
#endif
#endif