Google Git
Sign in
cobalt / cobalt / c73ce7d5dfce7ae20bcc30efc5f220e0fbac12b1 / . / src / third_party / mozjs-45 / js / src / asmjs / AsmJSSignalHandlers.cpp
blob: f20a40209c17849512b24531469f3e301e134817 [file] [log] [blame]
/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
* vim: set ts=8 sts=4 et sw=4 tw=99:
*
* Copyright 2014 Mozilla Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "asmjs/AsmJSSignalHandlers.h"
#include "mozilla/DebugOnly.h"
#include "mozilla/PodOperations.h"
#include "asmjs/AsmJSModule.h"
#include "jit/AtomicOperations.h"
#include "jit/Disassembler.h"
#include "vm/Runtime.h"
using namespace js;
using namespace js::jit;
using JS::GenericNaN;
using mozilla::DebugOnly;
using mozilla::PodArrayZero;
#if defined(ANDROID)
# include <sys/system_properties.h>
# if defined(MOZ_LINKER)
extern "C" MFBT_API bool IsSignalHandlingBroken();
# endif
#endif
// For platforms where the signal/exception handler runs on the same
// thread/stack as the victim (Unix and Windows), we can use TLS to find any
// currently executing asm.js code.
static JSRuntime*
RuntimeForCurrentThread()
{
PerThreadData* threadData = TlsPerThreadData.get();
if (!threadData)
return nullptr;
return threadData->runtimeIfOnOwnerThread();
}
// Crashing inside the signal handler can cause the handler to be recursively
// invoked, eventually blowing the stack without actually showing a crash
// report dialog via Breakpad. To guard against this we watch for such
// recursion and fall through to the next handler immediately rather than
// trying to handle it.
class AutoSetHandlingSignal
{
JSRuntime* rt;
public:
explicit AutoSetHandlingSignal(JSRuntime* rt)
: rt(rt)
{
MOZ_ASSERT(!rt->handlingSignal);
rt->handlingSignal = true;
}
~AutoSetHandlingSignal()
{
MOZ_ASSERT(rt->handlingSignal);
rt->handlingSignal = false;
}
};
#if defined(XP_WIN)
# define XMM_sig(p,i) ((p)->Xmm##i)
# define EIP_sig(p) ((p)->Eip)
# define RIP_sig(p) ((p)->Rip)
# define RAX_sig(p) ((p)->Rax)
# define RCX_sig(p) ((p)->Rcx)
# define RDX_sig(p) ((p)->Rdx)
# define RBX_sig(p) ((p)->Rbx)
# define RSP_sig(p) ((p)->Rsp)
# define RBP_sig(p) ((p)->Rbp)
# define RSI_sig(p) ((p)->Rsi)
# define RDI_sig(p) ((p)->Rdi)
# define R8_sig(p) ((p)->R8)
# define R9_sig(p) ((p)->R9)
# define R10_sig(p) ((p)->R10)
# define R11_sig(p) ((p)->R11)
# define R12_sig(p) ((p)->R12)
# define R13_sig(p) ((p)->R13)
# define R14_sig(p) ((p)->R14)
# define R15_sig(p) ((p)->R15)
#elif defined(__OpenBSD__)
# define XMM_sig(p,i) ((p)->sc_fpstate->fx_xmm[i])
# define EIP_sig(p) ((p)->sc_eip)
# define RIP_sig(p) ((p)->sc_rip)
# define RAX_sig(p) ((p)->sc_rax)
# define RCX_sig(p) ((p)->sc_rcx)
# define RDX_sig(p) ((p)->sc_rdx)
# define RBX_sig(p) ((p)->sc_rbx)
# define RSP_sig(p) ((p)->sc_rsp)
# define RBP_sig(p) ((p)->sc_rbp)
# define RSI_sig(p) ((p)->sc_rsi)
# define RDI_sig(p) ((p)->sc_rdi)
# define R8_sig(p) ((p)->sc_r8)
# define R9_sig(p) ((p)->sc_r9)
# define R10_sig(p) ((p)->sc_r10)
# define R11_sig(p) ((p)->sc_r11)
# define R12_sig(p) ((p)->sc_r12)
# define R13_sig(p) ((p)->sc_r13)
# define R14_sig(p) ((p)->sc_r14)
# define R15_sig(p) ((p)->sc_r15)
#elif defined(__linux__) || defined(SOLARIS)
# if defined(__linux__)
# define XMM_sig(p,i) ((p)->uc_mcontext.fpregs->_xmm[i])
# define EIP_sig(p) ((p)->uc_mcontext.gregs[REG_EIP])
# else
# define XMM_sig(p,i) ((p)->uc_mcontext.fpregs.fp_reg_set.fpchip_state.xmm[i])
# define EIP_sig(p) ((p)->uc_mcontext.gregs[REG_PC])
# endif
# define RIP_sig(p) ((p)->uc_mcontext.gregs[REG_RIP])
# define RAX_sig(p) ((p)->uc_mcontext.gregs[REG_RAX])
# define RCX_sig(p) ((p)->uc_mcontext.gregs[REG_RCX])
# define RDX_sig(p) ((p)->uc_mcontext.gregs[REG_RDX])
# define RBX_sig(p) ((p)->uc_mcontext.gregs[REG_RBX])
# define RSP_sig(p) ((p)->uc_mcontext.gregs[REG_RSP])
# define RBP_sig(p) ((p)->uc_mcontext.gregs[REG_RBP])
# define RSI_sig(p) ((p)->uc_mcontext.gregs[REG_RSI])
# define RDI_sig(p) ((p)->uc_mcontext.gregs[REG_RDI])
# define R8_sig(p) ((p)->uc_mcontext.gregs[REG_R8])
# define R9_sig(p) ((p)->uc_mcontext.gregs[REG_R9])
# define R10_sig(p) ((p)->uc_mcontext.gregs[REG_R10])
# define R11_sig(p) ((p)->uc_mcontext.gregs[REG_R11])
# define R12_sig(p) ((p)->uc_mcontext.gregs[REG_R12])
# define R13_sig(p) ((p)->uc_mcontext.gregs[REG_R13])
# define R14_sig(p) ((p)->uc_mcontext.gregs[REG_R14])
# if defined(__linux__) && defined(__arm__)
# define R15_sig(p) ((p)->uc_mcontext.arm_pc)
# else
# define R15_sig(p) ((p)->uc_mcontext.gregs[REG_R15])
# endif
# if defined(__linux__) && defined(__mips__)
# define EPC_sig(p) ((p)->uc_mcontext.pc)
# define RSP_sig(p) ((p)->uc_mcontext.gregs[29])
# define RFP_sig(p) ((p)->uc_mcontext.gregs[30])
# endif
#elif defined(__NetBSD__)
# define XMM_sig(p,i) (((struct fxsave64*)(p)->uc_mcontext.__fpregs)->fx_xmm[i])
# define EIP_sig(p) ((p)->uc_mcontext.__gregs[_REG_EIP])
# define RIP_sig(p) ((p)->uc_mcontext.__gregs[_REG_RIP])
# define RAX_sig(p) ((p)->uc_mcontext.__gregs[_REG_RAX])
# define RCX_sig(p) ((p)->uc_mcontext.__gregs[_REG_RCX])
# define RDX_sig(p) ((p)->uc_mcontext.__gregs[_REG_RDX])
# define RBX_sig(p) ((p)->uc_mcontext.__gregs[_REG_RBX])
# define RSP_sig(p) ((p)->uc_mcontext.__gregs[_REG_RSP])
# define RBP_sig(p) ((p)->uc_mcontext.__gregs[_REG_RBP])
# define RSI_sig(p) ((p)->uc_mcontext.__gregs[_REG_RSI])
# define RDI_sig(p) ((p)->uc_mcontext.__gregs[_REG_RDI])
# define R8_sig(p) ((p)->uc_mcontext.__gregs[_REG_R8])
# define R9_sig(p) ((p)->uc_mcontext.__gregs[_REG_R9])
# define R10_sig(p) ((p)->uc_mcontext.__gregs[_REG_R10])
# define R11_sig(p) ((p)->uc_mcontext.__gregs[_REG_R11])
# define R12_sig(p) ((p)->uc_mcontext.__gregs[_REG_R12])
# define R13_sig(p) ((p)->uc_mcontext.__gregs[_REG_R13])
# define R14_sig(p) ((p)->uc_mcontext.__gregs[_REG_R14])
# define R15_sig(p) ((p)->uc_mcontext.__gregs[_REG_R15])
#elif defined(__DragonFly__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
# if defined(__DragonFly__)
# define XMM_sig(p,i) (((union savefpu*)(p)->uc_mcontext.mc_fpregs)->sv_xmm.sv_xmm[i])
# else
# define XMM_sig(p,i) (((struct savefpu*)(p)->uc_mcontext.mc_fpstate)->sv_xmm[i])
# endif
# define EIP_sig(p) ((p)->uc_mcontext.mc_eip)
# define RIP_sig(p) ((p)->uc_mcontext.mc_rip)
# define RAX_sig(p) ((p)->uc_mcontext.mc_rax)
# define RCX_sig(p) ((p)->uc_mcontext.mc_rcx)
# define RDX_sig(p) ((p)->uc_mcontext.mc_rdx)
# define RBX_sig(p) ((p)->uc_mcontext.mc_rbx)
# define RSP_sig(p) ((p)->uc_mcontext.mc_rsp)
# define RBP_sig(p) ((p)->uc_mcontext.mc_rbp)
# define RSI_sig(p) ((p)->uc_mcontext.mc_rsi)
# define RDI_sig(p) ((p)->uc_mcontext.mc_rdi)
# define R8_sig(p) ((p)->uc_mcontext.mc_r8)
# define R9_sig(p) ((p)->uc_mcontext.mc_r9)
# define R10_sig(p) ((p)->uc_mcontext.mc_r10)
# define R11_sig(p) ((p)->uc_mcontext.mc_r11)
# define R12_sig(p) ((p)->uc_mcontext.mc_r12)
# define R13_sig(p) ((p)->uc_mcontext.mc_r13)
# define R14_sig(p) ((p)->uc_mcontext.mc_r14)
# if defined(__FreeBSD__) && defined(__arm__)
# define R15_sig(p) ((p)->uc_mcontext.__gregs[_REG_R15])
# else
# define R15_sig(p) ((p)->uc_mcontext.mc_r15)
# endif
#elif defined(XP_DARWIN)
# define EIP_sig(p) ((p)->uc_mcontext->__ss.__eip)
# define RIP_sig(p) ((p)->uc_mcontext->__ss.__rip)
# define R15_sig(p) ((p)->uc_mcontext->__ss.__pc)
#else
# error "Don't know how to read/write to the thread state via the mcontext_t."
#endif
#if defined(XP_WIN)
# include "jswin.h"
#else
# include <signal.h>
# include <sys/mman.h>
#endif
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
# include <sys/ucontext.h> // for ucontext_t, mcontext_t
#endif
#if defined(JS_CPU_X64)
# if defined(__DragonFly__)
# include <machine/npx.h> // for union savefpu
# elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || \
defined(__NetBSD__) || defined(__OpenBSD__)
# include <machine/fpu.h> // for struct savefpu/fxsave64
# endif
#endif
#if defined(ANDROID)
// Not all versions of the Android NDK define ucontext_t or mcontext_t.
// Detect this and provide custom but compatible definitions. Note that these
// follow the GLibc naming convention to access register values from
// mcontext_t.
//
// See: https://chromiumcodereview.appspot.com/10829122/
// See: http://code.google.com/p/android/issues/detail?id=34784
# if !defined(__BIONIC_HAVE_UCONTEXT_T)
# if defined(__arm__)
// GLibc on ARM defines mcontext_t has a typedef for 'struct sigcontext'.
// Old versions of the C library <signal.h> didn't define the type.
# if !defined(__BIONIC_HAVE_STRUCT_SIGCONTEXT)
# include <asm/sigcontext.h>
# endif
typedef struct sigcontext mcontext_t;
typedef struct ucontext {
uint32_t uc_flags;
struct ucontext* uc_link;
stack_t uc_stack;
mcontext_t uc_mcontext;
// Other fields are not used so don't define them here.
} ucontext_t;
# elif defined(__mips__)
typedef struct {
uint32_t regmask;
uint32_t status;
uint64_t pc;
uint64_t gregs[32];
uint64_t fpregs[32];
uint32_t acx;
uint32_t fpc_csr;
uint32_t fpc_eir;
uint32_t used_math;
uint32_t dsp;
uint64_t mdhi;
uint64_t mdlo;
uint32_t hi1;
uint32_t lo1;
uint32_t hi2;
uint32_t lo2;
uint32_t hi3;
uint32_t lo3;
} mcontext_t;
typedef struct ucontext {
uint32_t uc_flags;
struct ucontext* uc_link;
stack_t uc_stack;
mcontext_t uc_mcontext;
// Other fields are not used so don't define them here.
} ucontext_t;
# elif defined(__i386__)
// x86 version for Android.
typedef struct {
uint32_t gregs[19];
void* fpregs;
uint32_t oldmask;
uint32_t cr2;
} mcontext_t;
typedef uint32_t kernel_sigset_t[2]; // x86 kernel uses 64-bit signal masks
typedef struct ucontext {
uint32_t uc_flags;
struct ucontext* uc_link;
stack_t uc_stack;
mcontext_t uc_mcontext;
// Other fields are not used by V8, don't define them here.
} ucontext_t;
enum { REG_EIP = 14 };
# endif // defined(__i386__)
# endif // !defined(__BIONIC_HAVE_UCONTEXT_T)
#endif // defined(ANDROID)
#if !defined(XP_WIN)
# define CONTEXT ucontext_t
#endif
// Define a context type for use in the emulator code. This is usually just
// the same as CONTEXT, but on Mac we use a different structure since we call
// into the emulator code from a Mach exception handler rather than a
// sigaction-style signal handler.
#if defined(XP_DARWIN) && defined(ASMJS_MAY_USE_SIGNAL_HANDLERS_FOR_OOB)
# if defined(JS_CODEGEN_X64)
struct macos_x64_context {
x86_thread_state64_t thread;
x86_float_state64_t float_;
};
# define EMULATOR_CONTEXT macos_x64_context
# elif defined(JS_CODEGEN_X86)
struct macos_x86_context {
x86_thread_state_t thread;
x86_float_state_t float_;
};
# define EMULATOR_CONTEXT macos_x86_context
# elif defined(JS_CODEGEN_ARM)
struct macos_arm_context {
arm_thread_state_t thread;
arm_neon_state_t float_;
};
# define EMULATOR_CONTEXT macos_arm_context
# else
# error Unsupported architecture
# endif
#else
# define EMULATOR_CONTEXT CONTEXT
#endif
#if defined(JS_CPU_X64)
# define PC_sig(p) RIP_sig(p)
#elif defined(JS_CPU_X86)
# define PC_sig(p) EIP_sig(p)
#elif defined(JS_CPU_ARM)
# define PC_sig(p) R15_sig(p)
#elif defined(JS_CPU_MIPS)
# define PC_sig(p) EPC_sig(p)
#endif
static uint8_t**
ContextToPC(CONTEXT* context)
{
#ifdef JS_CODEGEN_NONE
MOZ_CRASH();
#else
return reinterpret_cast<uint8_t**>(&PC_sig(context));
#endif
}
#if defined(ASMJS_MAY_USE_SIGNAL_HANDLERS_FOR_OOB)
#if defined(JS_CODEGEN_X64)
MOZ_COLD static void
SetFPRegToNaN(size_t size, void* fp_reg)
{
MOZ_RELEASE_ASSERT(size <= Simd128DataSize);
memset(fp_reg, 0, Simd128DataSize);
switch (size) {
case 4: *static_cast<float*>(fp_reg) = GenericNaN(); break;
case 8: *static_cast<double*>(fp_reg) = GenericNaN(); break;
default:
// All SIMD accesses throw on OOB.
MOZ_CRASH("unexpected size in SetFPRegToNaN");
}
}
MOZ_COLD static void
SetGPRegToZero(void* gp_reg)
{
memset(gp_reg, 0, sizeof(intptr_t));
}
MOZ_COLD static void
SetFPRegToLoadedValue(SharedMem<void*> addr, size_t size, void* fp_reg)
{
MOZ_RELEASE_ASSERT(size <= Simd128DataSize);
memset(fp_reg, 0, Simd128DataSize);
AtomicOperations::memcpySafeWhenRacy(fp_reg, addr, size);
}
MOZ_COLD static void
SetGPRegToLoadedValue(SharedMem<void*> addr, size_t size, void* gp_reg)
{
MOZ_RELEASE_ASSERT(size <= sizeof(void*));
memset(gp_reg, 0, sizeof(void*));
AtomicOperations::memcpySafeWhenRacy(gp_reg, addr, size);
}
MOZ_COLD static void
SetGPRegToLoadedValueSext32(SharedMem<void*> addr, size_t size, void* gp_reg)
{
MOZ_RELEASE_ASSERT(size <= sizeof(int32_t));
int8_t msb = AtomicOperations::loadSafeWhenRacy(addr.cast<uint8_t*>() + (size - 1));
memset(gp_reg, 0, sizeof(void*));
memset(gp_reg, msb >> 7, sizeof(int32_t));
AtomicOperations::memcpySafeWhenRacy(gp_reg, addr, size);
}
MOZ_COLD static void
StoreValueFromFPReg(SharedMem<void*> addr, size_t size, const void* fp_reg)
{
MOZ_RELEASE_ASSERT(size <= Simd128DataSize);
AtomicOperations::memcpySafeWhenRacy(addr, const_cast<void*>(fp_reg), size);
}
MOZ_COLD static void
StoreValueFromGPReg(SharedMem<void*> addr, size_t size, const void* gp_reg)
{
MOZ_RELEASE_ASSERT(size <= sizeof(void*));
AtomicOperations::memcpySafeWhenRacy(addr, const_cast<void*>(gp_reg), size);
}
MOZ_COLD static void
StoreValueFromGPImm(SharedMem<void*> addr, size_t size, int32_t imm)
{
MOZ_RELEASE_ASSERT(size <= sizeof(imm));
AtomicOperations::memcpySafeWhenRacy(addr, static_cast<void*>(&imm), size);
}
# if !defined(XP_DARWIN)
MOZ_COLD static void*
AddressOfFPRegisterSlot(CONTEXT* context, FloatRegisters::Encoding encoding)
{
switch (encoding) {
case X86Encoding::xmm0: return &XMM_sig(context, 0);
case X86Encoding::xmm1: return &XMM_sig(context, 1);
case X86Encoding::xmm2: return &XMM_sig(context, 2);
case X86Encoding::xmm3: return &XMM_sig(context, 3);
case X86Encoding::xmm4: return &XMM_sig(context, 4);
case X86Encoding::xmm5: return &XMM_sig(context, 5);
case X86Encoding::xmm6: return &XMM_sig(context, 6);
case X86Encoding::xmm7: return &XMM_sig(context, 7);
case X86Encoding::xmm8: return &XMM_sig(context, 8);
case X86Encoding::xmm9: return &XMM_sig(context, 9);
case X86Encoding::xmm10: return &XMM_sig(context, 10);
case X86Encoding::xmm11: return &XMM_sig(context, 11);
case X86Encoding::xmm12: return &XMM_sig(context, 12);
case X86Encoding::xmm13: return &XMM_sig(context, 13);
case X86Encoding::xmm14: return &XMM_sig(context, 14);
case X86Encoding::xmm15: return &XMM_sig(context, 15);
default: break;
}
MOZ_CRASH();
}
MOZ_COLD static void*
AddressOfGPRegisterSlot(EMULATOR_CONTEXT* context, Registers::Code code)
{
switch (code) {
case X86Encoding::rax: return &RAX_sig(context);
case X86Encoding::rcx: return &RCX_sig(context);
case X86Encoding::rdx: return &RDX_sig(context);
case X86Encoding::rbx: return &RBX_sig(context);
case X86Encoding::rsp: return &RSP_sig(context);
case X86Encoding::rbp: return &RBP_sig(context);
case X86Encoding::rsi: return &RSI_sig(context);
case X86Encoding::rdi: return &RDI_sig(context);
case X86Encoding::r8: return &R8_sig(context);
case X86Encoding::r9: return &R9_sig(context);
case X86Encoding::r10: return &R10_sig(context);
case X86Encoding::r11: return &R11_sig(context);
case X86Encoding::r12: return &R12_sig(context);
case X86Encoding::r13: return &R13_sig(context);
case X86Encoding::r14: return &R14_sig(context);
case X86Encoding::r15: return &R15_sig(context);
default: break;
}
MOZ_CRASH();
}
# else
MOZ_COLD static void*
AddressOfFPRegisterSlot(EMULATOR_CONTEXT* context, FloatRegisters::Encoding encoding)
{
switch (encoding) {
case X86Encoding::xmm0: return &context->float_.__fpu_xmm0;
case X86Encoding::xmm1: return &context->float_.__fpu_xmm1;
case X86Encoding::xmm2: return &context->float_.__fpu_xmm2;
case X86Encoding::xmm3: return &context->float_.__fpu_xmm3;
case X86Encoding::xmm4: return &context->float_.__fpu_xmm4;
case X86Encoding::xmm5: return &context->float_.__fpu_xmm5;
case X86Encoding::xmm6: return &context->float_.__fpu_xmm6;
case X86Encoding::xmm7: return &context->float_.__fpu_xmm7;
case X86Encoding::xmm8: return &context->float_.__fpu_xmm8;
case X86Encoding::xmm9: return &context->float_.__fpu_xmm9;
case X86Encoding::xmm10: return &context->float_.__fpu_xmm10;
case X86Encoding::xmm11: return &context->float_.__fpu_xmm11;
case X86Encoding::xmm12: return &context->float_.__fpu_xmm12;
case X86Encoding::xmm13: return &context->float_.__fpu_xmm13;
case X86Encoding::xmm14: return &context->float_.__fpu_xmm14;
case X86Encoding::xmm15: return &context->float_.__fpu_xmm15;
default: break;
}
MOZ_CRASH();
}
MOZ_COLD static void*
AddressOfGPRegisterSlot(EMULATOR_CONTEXT* context, Registers::Code code)
{
switch (code) {
case X86Encoding::rax: return &context->thread.__rax;
case X86Encoding::rcx: return &context->thread.__rcx;
case X86Encoding::rdx: return &context->thread.__rdx;
case X86Encoding::rbx: return &context->thread.__rbx;
case X86Encoding::rsp: return &context->thread.__rsp;
case X86Encoding::rbp: return &context->thread.__rbp;
case X86Encoding::rsi: return &context->thread.__rsi;
case X86Encoding::rdi: return &context->thread.__rdi;
case X86Encoding::r8: return &context->thread.__r8;
case X86Encoding::r9: return &context->thread.__r9;
case X86Encoding::r10: return &context->thread.__r10;
case X86Encoding::r11: return &context->thread.__r11;
case X86Encoding::r12: return &context->thread.__r12;
case X86Encoding::r13: return &context->thread.__r13;
case X86Encoding::r14: return &context->thread.__r14;
case X86Encoding::r15: return &context->thread.__r15;
default: break;
}
MOZ_CRASH();
}
# endif // !XP_DARWIN
#endif // JS_CODEGEN_X64
MOZ_COLD static void
SetRegisterToCoercedUndefined(EMULATOR_CONTEXT* context, size_t size,
const Disassembler::OtherOperand& value)
{
if (value.kind() == Disassembler::OtherOperand::FPR)
SetFPRegToNaN(size, AddressOfFPRegisterSlot(context, value.fpr()));
else
SetGPRegToZero(AddressOfGPRegisterSlot(context, value.gpr()));
}
MOZ_COLD static void
SetRegisterToLoadedValue(EMULATOR_CONTEXT* context, SharedMem<void*> addr, size_t size,
const Disassembler::OtherOperand& value)
{
if (value.kind() == Disassembler::OtherOperand::FPR)
SetFPRegToLoadedValue(addr, size, AddressOfFPRegisterSlot(context, value.fpr()));
else
SetGPRegToLoadedValue(addr, size, AddressOfGPRegisterSlot(context, value.gpr()));
}
MOZ_COLD static void
SetRegisterToLoadedValueSext32(EMULATOR_CONTEXT* context, SharedMem<void*> addr, size_t size,
const Disassembler::OtherOperand& value)
{
SetGPRegToLoadedValueSext32(addr, size, AddressOfGPRegisterSlot(context, value.gpr()));
}
MOZ_COLD static void
StoreValueFromRegister(EMULATOR_CONTEXT* context, SharedMem<void*> addr, size_t size,
const Disassembler::OtherOperand& value)
{
if (value.kind() == Disassembler::OtherOperand::FPR)
StoreValueFromFPReg(addr, size, AddressOfFPRegisterSlot(context, value.fpr()));
else if (value.kind() == Disassembler::OtherOperand::GPR)
StoreValueFromGPReg(addr, size, AddressOfGPRegisterSlot(context, value.gpr()));
else
StoreValueFromGPImm(addr, size, value.imm());
}
MOZ_COLD static uint8_t*
ComputeAccessAddress(EMULATOR_CONTEXT* context, const Disassembler::ComplexAddress& address)
{
MOZ_RELEASE_ASSERT(!address.isPCRelative(), "PC-relative addresses not supported yet");
uintptr_t result = address.disp();
if (address.hasBase()) {
uintptr_t base;
StoreValueFromGPReg(SharedMem<void*>::unshared(&base), sizeof(uintptr_t),
AddressOfGPRegisterSlot(context, address.base()));
result += base;
}
if (address.hasIndex()) {
uintptr_t index;
StoreValueFromGPReg(SharedMem<void*>::unshared(&index), sizeof(uintptr_t),
AddressOfGPRegisterSlot(context, address.index()));
MOZ_ASSERT(address.scale() < 32, "address shift overflow");
result += index * (uintptr_t(1) << address.scale());
}
return reinterpret_cast<uint8_t*>(result);
}
MOZ_COLD static uint8_t*
EmulateHeapAccess(EMULATOR_CONTEXT* context, uint8_t* pc, uint8_t* faultingAddress,
const HeapAccess* heapAccess, const AsmJSModule& module)
{
MOZ_RELEASE_ASSERT(module.containsFunctionPC(pc));
MOZ_RELEASE_ASSERT(module.usesSignalHandlersForOOB());
MOZ_RELEASE_ASSERT(!heapAccess->hasLengthCheck());
MOZ_RELEASE_ASSERT(heapAccess->insnOffset() == (pc - module.codeBase()));
// Disassemble the instruction which caused the trap so that we can extract
// information about it and decide what to do.
Disassembler::HeapAccess access;
uint8_t* end = Disassembler::DisassembleHeapAccess(pc, &access);
const Disassembler::ComplexAddress& address = access.address();
MOZ_RELEASE_ASSERT(end > pc);
MOZ_RELEASE_ASSERT(module.containsFunctionPC(end));
#if defined(JS_CODEGEN_X64)
// Check x64 asm.js heap access invariants.
MOZ_RELEASE_ASSERT(address.disp() >= 0);
MOZ_RELEASE_ASSERT(address.base() == HeapReg.code());
MOZ_RELEASE_ASSERT(!address.hasIndex() || address.index() != HeapReg.code());
MOZ_RELEASE_ASSERT(address.scale() == 0);
if (address.hasBase()) {
uintptr_t base;
StoreValueFromGPReg(SharedMem<void*>::unshared(&base), sizeof(uintptr_t),
AddressOfGPRegisterSlot(context, address.base()));
MOZ_RELEASE_ASSERT(reinterpret_cast<uint8_t*>(base) == module.maybeHeap());
}
if (address.hasIndex()) {
uintptr_t index;
StoreValueFromGPReg(SharedMem<void*>::unshared(&index), sizeof(uintptr_t),
AddressOfGPRegisterSlot(context, address.index()));
MOZ_RELEASE_ASSERT(uint32_t(index) == index);
}
#endif
// Determine the actual effective address of the faulting access. We can't
// rely on the faultingAddress given to us by the OS, because we need the
// address of the start of the access, and the OS may sometimes give us an
// address somewhere in the middle of the heap access.
uint8_t* accessAddress = ComputeAccessAddress(context, address);
MOZ_RELEASE_ASSERT(size_t(faultingAddress - accessAddress) < access.size(),
"Given faulting address does not appear to be within computed "
"faulting address range");
MOZ_RELEASE_ASSERT(accessAddress >= module.maybeHeap(),
"Access begins outside the asm.js heap");
MOZ_RELEASE_ASSERT(accessAddress + access.size() <= module.maybeHeap() + AsmJSMappedSize,
"Access extends beyond the asm.js heap guard region");
MOZ_RELEASE_ASSERT(accessAddress + access.size() > module.maybeHeap() + module.heapLength(),
"Computed access address is not actually out of bounds");
// The basic sandbox model is that all heap accesses are a heap base
// register plus an index, and the index is always computed with 32-bit
// operations, so we know it can only be 4 GiB off of the heap base.
//
// However, we wish to support the optimization of folding immediates
// and scaled indices into addresses, and any address arithmetic we fold
// gets done at full pointer width, so it doesn't get properly wrapped.
// We support this by extending AsmJSMappedSize to the greatest size
// that could be reached by such an unwrapped address, and then when we
// arrive here in the signal handler for such an access, we compute the
// fully wrapped address, and perform the load or store on it.
//
// Taking a signal is really slow, but in theory programs really shouldn't
// be hitting this anyway.
intptr_t unwrappedOffset = accessAddress - module.maybeHeap().unwrap(/*safe - for value*/);
uint32_t wrappedOffset = uint32_t(unwrappedOffset);
size_t size = access.size();
MOZ_RELEASE_ASSERT(wrappedOffset + size > wrappedOffset);
bool inBounds = wrappedOffset < module.heapLength() &&
wrappedOffset + size < module.heapLength();
// If this is storing Z of an XYZ, check whether X is also in bounds, so
// that we don't store anything before throwing.
MOZ_RELEASE_ASSERT(unwrappedOffset > heapAccess->offsetWithinWholeSimdVector());
uint32_t wrappedBaseOffset = uint32_t(unwrappedOffset - heapAccess->offsetWithinWholeSimdVector());
if (wrappedBaseOffset >= module.heapLength())
inBounds = false;
if (inBounds) {
// We now know that this is an access that is actually in bounds when
// properly wrapped. Complete the load or store with the wrapped
// address.
SharedMem<uint8_t*> wrappedAddress = module.maybeHeap() + wrappedOffset;
MOZ_RELEASE_ASSERT(wrappedAddress >= module.maybeHeap());
MOZ_RELEASE_ASSERT(wrappedAddress + size > wrappedAddress);
MOZ_RELEASE_ASSERT(wrappedAddress + size <= module.maybeHeap() + module.heapLength());
switch (access.kind()) {
case Disassembler::HeapAccess::Load:
SetRegisterToLoadedValue(context, wrappedAddress.cast<void*>(), size, access.otherOperand());
break;
case Disassembler::HeapAccess::LoadSext32:
SetRegisterToLoadedValueSext32(context, wrappedAddress.cast<void*>(), size, access.otherOperand());
break;
case Disassembler::HeapAccess::Store:
StoreValueFromRegister(context, wrappedAddress.cast<void*>(), size, access.otherOperand());
break;
case Disassembler::HeapAccess::Unknown:
MOZ_CRASH("Failed to disassemble instruction");
}
} else {
// We now know that this is an out-of-bounds access made by an asm.js
// load/store that we should handle.
if (heapAccess->throwOnOOB())
return module.outOfBoundsExit();
switch (access.kind()) {
case Disassembler::HeapAccess::Load:
case Disassembler::HeapAccess::LoadSext32:
// Assign the JS-defined result value to the destination register
// (ToInt32(undefined) or ToNumber(undefined), determined by the
// type of the destination register). Very conveniently, we can
// infer the type from the register class, since all SIMD accesses
// throw on out of bounds (see above), so the only types using FP
// registers are float32 and double.
SetRegisterToCoercedUndefined(context, access.size(), access.otherOperand());
break;
case Disassembler::HeapAccess::Store:
// Do nothing.
break;
case Disassembler::HeapAccess::Unknown:
MOZ_CRASH("Failed to disassemble instruction");
}
}
return end;
}
#if defined(XP_WIN)
static bool
HandleFault(PEXCEPTION_POINTERS exception)
{
EXCEPTION_RECORD* record = exception->ExceptionRecord;
CONTEXT* context = exception->ContextRecord;
if (record->ExceptionCode != EXCEPTION_ACCESS_VIOLATION)
return false;
uint8_t** ppc = ContextToPC(context);
uint8_t* pc = *ppc;
if (record->NumberParameters < 2)
return false;
// Don't allow recursive handling of signals, see AutoSetHandlingSignal.
JSRuntime* rt = RuntimeForCurrentThread();
if (!rt || rt->handlingSignal)
return false;
AutoSetHandlingSignal handling(rt);
AsmJSActivation* activation = rt->asmJSActivationStack();
if (!activation)
return false;
const AsmJSModule& module = activation->module();
// These checks aren't necessary, but, since we can, check anyway to make
// sure we aren't covering up a real bug.
uint8_t* faultingAddress = reinterpret_cast<uint8_t*>(record->ExceptionInformation[1]);
if (!module.maybeHeap() ||
faultingAddress < module.maybeHeap() ||
faultingAddress >= module.maybeHeap() + AsmJSMappedSize)
{
return false;
}
if (!module.containsFunctionPC(pc)) {
// On Windows, it is possible for InterruptRunningCode to execute
// between a faulting heap access and the handling of the fault due
// to InterruptRunningCode's use of SuspendThread. When this happens,
// after ResumeThread, the exception handler is called with pc equal to
// module.interruptExit, which is logically wrong. The Right Thing would
// be for the OS to make fault-handling atomic (so that CONTEXT.pc was
// always the logically-faulting pc). Fortunately, we can detect this
// case and silence the exception ourselves (the exception will
// retrigger after the interrupt jumps back to resumePC).
if (pc == module.interruptExit() &&
module.containsFunctionPC(activation->resumePC()) &&
module.lookupHeapAccess(activation->resumePC()))
{
return true;
}
return false;
}
const HeapAccess* heapAccess = module.lookupHeapAccess(pc);
if (!heapAccess)
return false;
*ppc = EmulateHeapAccess(context, pc, faultingAddress, heapAccess, module);
return true;
}
static LONG WINAPI
AsmJSFaultHandler(LPEXCEPTION_POINTERS exception)
{
if (HandleFault(exception))
return EXCEPTION_CONTINUE_EXECUTION;
// No need to worry about calling other handlers, the OS does this for us.
return EXCEPTION_CONTINUE_SEARCH;
}
#elif defined(XP_DARWIN)
# include <mach/exc.h>
static uint8_t**
ContextToPC(EMULATOR_CONTEXT* context)
{
# if defined(JS_CPU_X64)
static_assert(sizeof(context->thread.__rip) == sizeof(void*),
"stored IP should be compile-time pointer-sized");
return reinterpret_cast<uint8_t**>(&context->thread.__rip);
# elif defined(JS_CPU_X86)
static_assert(sizeof(context->thread.uts.ts32.__eip) == sizeof(void*),
"stored IP should be compile-time pointer-sized");
return reinterpret_cast<uint8_t**>(&context->thread.uts.ts32.__eip);
# elif defined(JS_CPU_ARM)
static_assert(sizeof(context->thread.__pc) == sizeof(void*),
"stored IP should be compile-time pointer-sized");
return reinterpret_cast<uint8_t**>(&context->thread.__pc);
# else
# error Unsupported architecture
# endif
}
// This definition was generated by mig (the Mach Interface Generator) for the
// routine 'exception_raise' (exc.defs).
#pragma pack(4)
typedef struct {
mach_msg_header_t Head;
/* start of the kernel processed data */
mach_msg_body_t msgh_body;
mach_msg_port_descriptor_t thread;
mach_msg_port_descriptor_t task;
/* end of the kernel processed data */
NDR_record_t NDR;
exception_type_t exception;
mach_msg_type_number_t codeCnt;
int64_t code[2];
} Request__mach_exception_raise_t;
#pragma pack()
// The full Mach message also includes a trailer.
struct ExceptionRequest
{
Request__mach_exception_raise_t body;
mach_msg_trailer_t trailer;
};
static bool
HandleMachException(JSRuntime* rt, const ExceptionRequest& request)
{
// Don't allow recursive handling of signals, see AutoSetHandlingSignal.
if (rt->handlingSignal)
return false;
AutoSetHandlingSignal handling(rt);
// Get the port of the JSRuntime's thread from the message.
mach_port_t rtThread = request.body.thread.name;
// Read out the JSRuntime thread's register state.
EMULATOR_CONTEXT context;
# if defined(JS_CODEGEN_X64)
unsigned int thread_state_count = x86_THREAD_STATE64_COUNT;
unsigned int float_state_count = x86_FLOAT_STATE64_COUNT;
int thread_state = x86_THREAD_STATE64;
int float_state = x86_FLOAT_STATE64;
# elif defined(JS_CODEGEN_X86)
unsigned int thread_state_count = x86_THREAD_STATE_COUNT;
unsigned int float_state_count = x86_FLOAT_STATE_COUNT;
int thread_state = x86_THREAD_STATE;
int float_state = x86_FLOAT_STATE;
# elif defined(JS_CODEGEN_ARM)
unsigned int thread_state_count = ARM_THREAD_STATE_COUNT;
unsigned int float_state_count = ARM_NEON_STATE_COUNT;
int thread_state = ARM_THREAD_STATE;
int float_state = ARM_NEON_STATE;
# else
# error Unsupported architecture
# endif
kern_return_t kret;
kret = thread_get_state(rtThread, thread_state,
(thread_state_t)&context.thread, &thread_state_count);
if (kret != KERN_SUCCESS)
return false;
kret = thread_get_state(rtThread, float_state,
(thread_state_t)&context.float_, &float_state_count);
if (kret != KERN_SUCCESS)
return false;
uint8_t** ppc = ContextToPC(&context);
uint8_t* pc = *ppc;
if (request.body.exception != EXC_BAD_ACCESS || request.body.codeCnt != 2)
return false;
AsmJSActivation* activation = rt->asmJSActivationStack();
if (!activation)
return false;
const AsmJSModule& module = activation->module();
if (!module.containsFunctionPC(pc))
return false;
// These checks aren't necessary, but, since we can, check anyway to make
// sure we aren't covering up a real bug.
uint8_t* faultingAddress = reinterpret_cast<uint8_t*>(request.body.code[1]);
if (!module.maybeHeap() ||
faultingAddress < module.maybeHeap() ||
faultingAddress >= module.maybeHeap() + AsmJSMappedSize)
{
return false;
}
const HeapAccess* heapAccess = module.lookupHeapAccess(pc);
if (!heapAccess)
return false;
*ppc = EmulateHeapAccess(&context, pc, faultingAddress, heapAccess, module);
// Update the thread state with the new pc and register values.
kret = thread_set_state(rtThread, float_state, (thread_state_t)&context.float_, float_state_count);
if (kret != KERN_SUCCESS)
return false;
kret = thread_set_state(rtThread, thread_state, (thread_state_t)&context.thread, thread_state_count);
if (kret != KERN_SUCCESS)
return false;
return true;
}
// Taken from mach_exc in /usr/include/mach/mach_exc.defs.
static const mach_msg_id_t sExceptionId = 2405;
// The choice of id here is arbitrary, the only constraint is that sQuitId != sExceptionId.
static const mach_msg_id_t sQuitId = 42;
void
AsmJSMachExceptionHandlerThread(void* threadArg)
{
JSRuntime* rt = reinterpret_cast<JSRuntime*>(threadArg);
mach_port_t port = rt->asmJSMachExceptionHandler.port();
kern_return_t kret;
while(true) {
ExceptionRequest request;
kret = mach_msg(&request.body.Head, MACH_RCV_MSG, 0, sizeof(request),
port, MACH_MSG_TIMEOUT_NONE, MACH_PORT_NULL);
// If we fail even receiving the message, we can't even send a reply!
// Rather than hanging the faulting thread (hanging the browser), crash.
if (kret != KERN_SUCCESS) {
fprintf(stderr, "AsmJSMachExceptionHandlerThread: mach_msg failed with %d\n", (int)kret);
MOZ_CRASH();
}
// There are only two messages we should be receiving: an exception
// message that occurs when the runtime's thread faults and the quit
// message sent when the runtime is shutting down.
if (request.body.Head.msgh_id == sQuitId)
break;
if (request.body.Head.msgh_id != sExceptionId) {
fprintf(stderr, "Unexpected msg header id %d\n", (int)request.body.Head.msgh_bits);
MOZ_CRASH();
}
// Some thread just commited an EXC_BAD_ACCESS and has been suspended by
// the kernel. The kernel is waiting for us to reply with instructions.
// Our default is the "not handled" reply (by setting the RetCode field
// of the reply to KERN_FAILURE) which tells the kernel to continue
// searching at the process and system level. If this is an asm.js
// expected exception, we handle it and return KERN_SUCCESS.
bool handled = HandleMachException(rt, request);
kern_return_t replyCode = handled ? KERN_SUCCESS : KERN_FAILURE;
// This magic incantation to send a reply back to the kernel was derived
// from the exc_server generated by 'mig -v /usr/include/mach/mach_exc.defs'.
__Reply__exception_raise_t reply;
reply.Head.msgh_bits = MACH_MSGH_BITS(MACH_MSGH_BITS_REMOTE(request.body.Head.msgh_bits), 0);
reply.Head.msgh_size = sizeof(reply);
reply.Head.msgh_remote_port = request.body.Head.msgh_remote_port;
reply.Head.msgh_local_port = MACH_PORT_NULL;
reply.Head.msgh_id = request.body.Head.msgh_id + 100;
reply.NDR = NDR_record;
reply.RetCode = replyCode;
mach_msg(&reply.Head, MACH_SEND_MSG, sizeof(reply), 0, MACH_PORT_NULL,
MACH_MSG_TIMEOUT_NONE, MACH_PORT_NULL);
}
}
AsmJSMachExceptionHandler::AsmJSMachExceptionHandler()
: installed_(false),
thread_(nullptr),
port_(MACH_PORT_NULL)
{}
void
AsmJSMachExceptionHandler::uninstall()
{
if (installed_) {
thread_port_t thread = mach_thread_self();
kern_return_t kret = thread_set_exception_ports(thread,
EXC_MASK_BAD_ACCESS,
MACH_PORT_NULL,
EXCEPTION_DEFAULT | MACH_EXCEPTION_CODES,
THREAD_STATE_NONE);
mach_port_deallocate(mach_task_self(), thread);
if (kret != KERN_SUCCESS)
MOZ_CRASH();
installed_ = false;
}
if (thread_ != nullptr) {
// Break the handler thread out of the mach_msg loop.
mach_msg_header_t msg;
msg.msgh_bits = MACH_MSGH_BITS(MACH_MSG_TYPE_COPY_SEND, 0);
msg.msgh_size = sizeof(msg);
msg.msgh_remote_port = port_;
msg.msgh_local_port = MACH_PORT_NULL;
msg.msgh_reserved = 0;
msg.msgh_id = sQuitId;
kern_return_t kret = mach_msg(&msg, MACH_SEND_MSG, sizeof(msg), 0, MACH_PORT_NULL,
MACH_MSG_TIMEOUT_NONE, MACH_PORT_NULL);
if (kret != KERN_SUCCESS) {
fprintf(stderr, "AsmJSMachExceptionHandler: failed to send quit message: %d\n", (int)kret);
MOZ_CRASH();
}
// Wait for the handler thread to complete before deallocating the port.
PR_JoinThread(thread_);
thread_ = nullptr;
}
if (port_ != MACH_PORT_NULL) {
DebugOnly<kern_return_t> kret = mach_port_destroy(mach_task_self(), port_);
MOZ_ASSERT(kret == KERN_SUCCESS);
port_ = MACH_PORT_NULL;
}
}
bool
AsmJSMachExceptionHandler::install(JSRuntime* rt)
{
MOZ_ASSERT(!installed());
kern_return_t kret;
mach_port_t thread;
// Get a port which can send and receive data.
kret = mach_port_allocate(mach_task_self(), MACH_PORT_RIGHT_RECEIVE, &port_);
if (kret != KERN_SUCCESS)
goto error;
kret = mach_port_insert_right(mach_task_self(), port_, port_, MACH_MSG_TYPE_MAKE_SEND);
if (kret != KERN_SUCCESS)
goto error;
// Create a thread to block on reading port_.
thread_ = PR_CreateThread(PR_USER_THREAD, AsmJSMachExceptionHandlerThread, rt,
PR_PRIORITY_NORMAL, PR_GLOBAL_THREAD, PR_JOINABLE_THREAD, 0);
if (!thread_)
goto error;
// Direct exceptions on this thread to port_ (and thus our handler thread).
// Note: we are totally clobbering any existing *thread* exception ports and
// not even attempting to forward. Breakpad and gdb both use the *process*
// exception ports which are only called if the thread doesn't handle the
// exception, so we should be fine.
thread = mach_thread_self();
kret = thread_set_exception_ports(thread,
EXC_MASK_BAD_ACCESS,
port_,
EXCEPTION_DEFAULT | MACH_EXCEPTION_CODES,
THREAD_STATE_NONE);
mach_port_deallocate(mach_task_self(), thread);
if (kret != KERN_SUCCESS)
goto error;
installed_ = true;
return true;
error:
uninstall();
return false;
}
#else // If not Windows or Mac, assume Unix
// Be very cautious and default to not handling; we don't want to accidentally
// silence real crashes from real bugs.
static bool
HandleFault(int signum, siginfo_t* info, void* ctx)
{
// The signals we're expecting come from access violations, accessing
// mprotected memory. If the signal originates anywhere else, don't try
// to handle it.
MOZ_RELEASE_ASSERT(signum == SIGSEGV);
if (info->si_code != SEGV_ACCERR)
return false;
CONTEXT* context = (CONTEXT*)ctx;
uint8_t** ppc = ContextToPC(context);
uint8_t* pc = *ppc;
// Don't allow recursive handling of signals, see AutoSetHandlingSignal.
JSRuntime* rt = RuntimeForCurrentThread();
if (!rt || rt->handlingSignal)
return false;
AutoSetHandlingSignal handling(rt);
AsmJSActivation* activation = rt->asmJSActivationStack();
if (!activation)
return false;
const AsmJSModule& module = activation->module();
if (!module.containsFunctionPC(pc))
return false;
// These checks aren't necessary, but, since we can, check anyway to make
// sure we aren't covering up a real bug.
uint8_t* faultingAddress = reinterpret_cast<uint8_t*>(info->si_addr);
if (!module.maybeHeap() ||
faultingAddress < module.maybeHeap() ||
faultingAddress >= module.maybeHeap() + AsmJSMappedSize)
{
return false;
}
const HeapAccess* heapAccess = module.lookupHeapAccess(pc);
if (!heapAccess)
return false;
*ppc = EmulateHeapAccess(context, pc, faultingAddress, heapAccess, module);
return true;
}
static struct sigaction sPrevSEGVHandler;
static void
AsmJSFaultHandler(int signum, siginfo_t* info, void* context)
{
if (HandleFault(signum, info, context))
return;
// This signal is not for any asm.js code we expect, so we need to forward
// the signal to the next handler. If there is no next handler (SIG_IGN or
// SIG_DFL), then it's time to crash. To do this, we set the signal back to
// its original disposition and return. This will cause the faulting op to
// be re-executed which will crash in the normal way. The advantage of
// doing this to calling _exit() is that we remove ourselves from the crash
// stack which improves crash reports. If there is a next handler, call it.
// It will either crash synchronously, fix up the instruction so that
// execution can continue and return, or trigger a crash by returning the
// signal to it's original disposition and returning.
//
// Note: the order of these tests matter.
if (sPrevSEGVHandler.sa_flags & SA_SIGINFO)
sPrevSEGVHandler.sa_sigaction(signum, info, context);
else if (sPrevSEGVHandler.sa_handler == SIG_DFL || sPrevSEGVHandler.sa_handler == SIG_IGN)
sigaction(signum, &sPrevSEGVHandler, nullptr);
else
sPrevSEGVHandler.sa_handler(signum);
}
#endif
#endif // defined(ASMJS_MAY_USE_SIGNAL_HANDLERS_FOR_OOB)
static void
RedirectIonBackedgesToInterruptCheck(JSRuntime* rt)
{
if (jit::JitRuntime* jitRuntime = rt->jitRuntime()) {
// If the backedge list is being mutated, the pc must be in C++ code and
// thus not in a JIT iloop. We assume that the interrupt flag will be
// checked at least once before entering JIT code (if not, no big deal;
// the browser will just request another interrupt in a second).
if (!jitRuntime->mutatingBackedgeList())
jitRuntime->patchIonBackedges(rt, jit::JitRuntime::BackedgeInterruptCheck);
}
}
static bool
RedirectJitCodeToInterruptCheck(JSRuntime* rt, CONTEXT* context)
{
RedirectIonBackedgesToInterruptCheck(rt);
if (AsmJSActivation* activation = rt->asmJSActivationStack()) {
const AsmJSModule& module = activation->module();
#ifdef JS_SIMULATOR
if (module.containsFunctionPC(rt->simulator()->get_pc_as<void*>()))
rt->simulator()->set_resume_pc(module.interruptExit());
#endif
uint8_t** ppc = ContextToPC(context);
uint8_t* pc = *ppc;
if (module.containsFunctionPC(pc)) {
activation->setResumePC(pc);
*ppc = module.interruptExit();
return true;
}
}
return false;
}
#if !defined(XP_WIN)
// For the interrupt signal, pick a signal number that:
// - is not otherwise used by mozilla or standard libraries
// - defaults to nostop and noprint on gdb/lldb so that noone is bothered
// SIGVTALRM a relative of SIGALRM, so intended for user code, but, unlike
// SIGALRM, not used anywhere else in Mozilla.
static const int sInterruptSignal = SIGVTALRM;
static void
JitInterruptHandler(int signum, siginfo_t* info, void* context)
{
if (JSRuntime* rt = RuntimeForCurrentThread())
RedirectJitCodeToInterruptCheck(rt, (CONTEXT*)context);
}
#endif
bool
js::EnsureSignalHandlersInstalled(JSRuntime* rt)
{
#if defined(XP_DARWIN) && defined(ASMJS_MAY_USE_SIGNAL_HANDLERS_FOR_OOB)
// On OSX, each JSRuntime gets its own handler thread.
if (!rt->asmJSMachExceptionHandler.installed() && !rt->asmJSMachExceptionHandler.install(rt))
return false;
#endif
// All the rest of the handlers are process-wide and thus must only be
// installed once. We assume that there are no races creating the first
// JSRuntime of the process.
static bool sTried = false;
static bool sResult = false;
if (sTried)
return sResult;
sTried = true;
#if defined(ANDROID)
// Before Android 4.4 (SDK version 19), there is a bug
// https://android-review.googlesource.com/#/c/52333
// in Bionic's pthread_join which causes pthread_join to return early when
// pthread_kill is used (on any thread). Nobody expects the pthread_cond_wait
// EINTRquisition.
char version_string[PROP_VALUE_MAX];
PodArrayZero(version_string);
if (__system_property_get("ro.build.version.sdk", version_string) > 0) {
if (atol(version_string) < 19)
return false;
}
# if defined(MOZ_LINKER)
// Signal handling is broken on some android systems.
if (IsSignalHandlingBroken())
return false;
# endif
#endif
// The interrupt handler allows the main thread to be paused from another
// thread (see InterruptRunningJitCode).
#if defined(XP_WIN)
// Windows uses SuspendThread to stop the main thread from another thread.
#else
struct sigaction interruptHandler;
interruptHandler.sa_flags = SA_SIGINFO;
interruptHandler.sa_sigaction = &JitInterruptHandler;
sigemptyset(&interruptHandler.sa_mask);
struct sigaction prev;
if (sigaction(sInterruptSignal, &interruptHandler, &prev))
MOZ_CRASH("unable to install interrupt handler");
// There shouldn't be any other handlers installed for sInterruptSignal. If
// there are, we could always forward, but we need to understand what we're
// doing to avoid problematic interference.
if ((prev.sa_flags & SA_SIGINFO && prev.sa_sigaction) ||
(prev.sa_handler != SIG_DFL && prev.sa_handler != SIG_IGN))
{
MOZ_CRASH("contention for interrupt signal");
}
#endif // defined(XP_WIN)
#if defined(ASMJS_MAY_USE_SIGNAL_HANDLERS_FOR_OOB)
// Install a SIGSEGV handler to handle safely-out-of-bounds asm.js heap
// access.
# if defined(XP_WIN)
if (!AddVectoredExceptionHandler(/* FirstHandler = */ true, AsmJSFaultHandler))
return false;
# elif defined(XP_DARWIN)
// OSX handles seg faults via the Mach exception handler above, so don't
// install AsmJSFaultHandler.
# else
// SA_NODEFER allows us to reenter the signal handler if we crash while
// handling the signal, and fall through to the Breakpad handler by testing
// handlingSignal.
struct sigaction faultHandler;
faultHandler.sa_flags = SA_SIGINFO | SA_NODEFER;
faultHandler.sa_sigaction = &AsmJSFaultHandler;
sigemptyset(&faultHandler.sa_mask);
if (sigaction(SIGSEGV, &faultHandler, &sPrevSEGVHandler))
MOZ_CRASH("unable to install segv handler");
# endif
#endif // defined(ASMJS_MAY_USE_SIGNAL_HANDLERS_FOR_OOB)
sResult = true;
return true;
}
// JSRuntime::requestInterrupt sets interrupt_ (which is checked frequently by
// C++ code at every Baseline JIT loop backedge) and jitStackLimit_ (which is
// checked at every Baseline and Ion JIT function prologue). The remaining
// sources of potential iloops (Ion loop backedges and all asm.js code) are
// handled by this function:
// 1. Ion loop backedges are patched to instead point to a stub that handles the
// interrupt;
// 2. if the main thread's pc is inside asm.js code, the pc is updated to point
// to a stub that handles the interrupt.
void
js::InterruptRunningJitCode(JSRuntime* rt)
{
// If signal handlers weren't installed, then Ion and asm.js emit normal
// interrupt checks and don't need asynchronous interruption.
if (!rt->canUseSignalHandlers())
return;
// If we are on runtime's main thread, then: pc is not in asm.js code (so
// nothing to do for asm.js) and we can patch Ion backedges without any
// special synchronization.
if (rt == RuntimeForCurrentThread()) {
RedirectIonBackedgesToInterruptCheck(rt);
return;
}
// We are not on the runtime's main thread, so to do 1 and 2 above, we need
// to halt the runtime's main thread first.
#if defined(XP_WIN)
// On Windows, we can simply suspend the main thread and work directly on
// its context from this thread. SuspendThread can sporadically fail if the
// thread is in the middle of a syscall. Rather than retrying in a loop,
// just wait for the next request for interrupt.
HANDLE thread = (HANDLE)rt->ownerThreadNative();
if (SuspendThread(thread) != -1) {
CONTEXT context;
context.ContextFlags = CONTEXT_CONTROL;
if (GetThreadContext(thread, &context)) {
if (RedirectJitCodeToInterruptCheck(rt, &context))
SetThreadContext(thread, &context);
}
ResumeThread(thread);
}
#else
// On Unix, we instead deliver an async signal to the main thread which
// halts the thread and callers our JitInterruptHandler (which has already
// been installed by EnsureSignalHandlersInstalled).
pthread_t thread = (pthread_t)rt->ownerThreadNative();
pthread_kill(thread, sInterruptSignal);
#endif
}