| /* |
| * Copyright 2006 The Android Open Source Project |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #ifndef SkRect_DEFINED |
| #define SkRect_DEFINED |
| |
| #include "include/core/SkPoint.h" |
| #include "include/core/SkSize.h" |
| #include "include/private/SkSafe32.h" |
| #include "include/private/SkTFitsIn.h" |
| |
| #include <algorithm> |
| #include <utility> |
| |
| struct SkRect; |
| |
| /** \struct SkIRect |
| SkIRect holds four 32-bit integer coordinates describing the upper and |
| lower bounds of a rectangle. SkIRect may be created from outer bounds or |
| from position, width, and height. SkIRect describes an area; if its right |
| is less than or equal to its left, or if its bottom is less than or equal to |
| its top, it is considered empty. |
| */ |
| struct SK_API SkIRect { |
| int32_t fLeft; //!< smaller x-axis bounds |
| int32_t fTop; //!< smaller y-axis bounds |
| int32_t fRight; //!< larger x-axis bounds |
| int32_t fBottom; //!< larger y-axis bounds |
| |
| /** Returns constructed SkIRect set to (0, 0, 0, 0). |
| Many other rectangles are empty; if left is equal to or greater than right, |
| or if top is equal to or greater than bottom. Setting all members to zero |
| is a convenience, but does not designate a special empty rectangle. |
| |
| @return bounds (0, 0, 0, 0) |
| */ |
| static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeEmpty() { |
| return SkIRect{0, 0, 0, 0}; |
| } |
| |
| /** Returns constructed SkIRect set to (0, 0, w, h). Does not validate input; w or h |
| may be negative. |
| |
| @param w width of constructed SkIRect |
| @param h height of constructed SkIRect |
| @return bounds (0, 0, w, h) |
| */ |
| static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeWH(int32_t w, int32_t h) { |
| return SkIRect{0, 0, w, h}; |
| } |
| |
| /** Returns constructed SkIRect set to (0, 0, size.width(), size.height()). |
| Does not validate input; size.width() or size.height() may be negative. |
| |
| @param size values for SkIRect width and height |
| @return bounds (0, 0, size.width(), size.height()) |
| */ |
| static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeSize(const SkISize& size) { |
| return SkIRect{0, 0, size.fWidth, size.fHeight}; |
| } |
| |
| /** Returns constructed SkIRect set to (pt.x(), pt.y(), pt.x() + size.width(), |
| pt.y() + size.height()). Does not validate input; size.width() or size.height() may be |
| negative. |
| |
| @param pt values for SkIRect fLeft and fTop |
| @param size values for SkIRect width and height |
| @return bounds at pt with width and height of size |
| */ |
| static constexpr SkIRect SK_WARN_UNUSED_RESULT MakePtSize(SkIPoint pt, SkISize size) { |
| return MakeXYWH(pt.x(), pt.y(), size.width(), size.height()); |
| } |
| |
| /** Returns constructed SkIRect set to (l, t, r, b). Does not sort input; SkIRect may |
| result in fLeft greater than fRight, or fTop greater than fBottom. |
| |
| @param l integer stored in fLeft |
| @param t integer stored in fTop |
| @param r integer stored in fRight |
| @param b integer stored in fBottom |
| @return bounds (l, t, r, b) |
| */ |
| static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeLTRB(int32_t l, int32_t t, |
| int32_t r, int32_t b) { |
| return SkIRect{l, t, r, b}; |
| } |
| |
| /** Returns constructed SkIRect set to: (x, y, x + w, y + h). |
| Does not validate input; w or h may be negative. |
| |
| @param x stored in fLeft |
| @param y stored in fTop |
| @param w added to x and stored in fRight |
| @param h added to y and stored in fBottom |
| @return bounds at (x, y) with width w and height h |
| */ |
| static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeXYWH(int32_t x, int32_t y, |
| int32_t w, int32_t h) { |
| return { x, y, Sk32_sat_add(x, w), Sk32_sat_add(y, h) }; |
| } |
| |
| /** Returns left edge of SkIRect, if sorted. |
| Call sort() to reverse fLeft and fRight if needed. |
| |
| @return fLeft |
| */ |
| int32_t left() const { return fLeft; } |
| |
| /** Returns top edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid, |
| and sort() to reverse fTop and fBottom if needed. |
| |
| @return fTop |
| */ |
| int32_t top() const { return fTop; } |
| |
| /** Returns right edge of SkIRect, if sorted. |
| Call sort() to reverse fLeft and fRight if needed. |
| |
| @return fRight |
| */ |
| int32_t right() const { return fRight; } |
| |
| /** Returns bottom edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid, |
| and sort() to reverse fTop and fBottom if needed. |
| |
| @return fBottom |
| */ |
| int32_t bottom() const { return fBottom; } |
| |
| /** Returns left edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid, |
| and sort() to reverse fLeft and fRight if needed. |
| |
| @return fLeft |
| */ |
| int32_t x() const { return fLeft; } |
| |
| /** Returns top edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid, |
| and sort() to reverse fTop and fBottom if needed. |
| |
| @return fTop |
| */ |
| int32_t y() const { return fTop; } |
| |
| // Experimental |
| SkIPoint topLeft() const { return {fLeft, fTop}; } |
| |
| /** Returns span on the x-axis. This does not check if SkIRect is sorted, or if |
| result fits in 32-bit signed integer; result may be negative. |
| |
| @return fRight minus fLeft |
| */ |
| int32_t width() const { return Sk32_can_overflow_sub(fRight, fLeft); } |
| |
| /** Returns span on the y-axis. This does not check if SkIRect is sorted, or if |
| result fits in 32-bit signed integer; result may be negative. |
| |
| @return fBottom minus fTop |
| */ |
| int32_t height() const { return Sk32_can_overflow_sub(fBottom, fTop); } |
| |
| /** Returns spans on the x-axis and y-axis. This does not check if SkIRect is sorted, |
| or if result fits in 32-bit signed integer; result may be negative. |
| |
| @return SkISize (width, height) |
| */ |
| SkISize size() const { return SkISize::Make(this->width(), this->height()); } |
| |
| /** Returns span on the x-axis. This does not check if SkIRect is sorted, so the |
| result may be negative. This is safer than calling width() since width() might |
| overflow in its calculation. |
| |
| @return fRight minus fLeft cast to int64_t |
| */ |
| int64_t width64() const { return (int64_t)fRight - (int64_t)fLeft; } |
| |
| /** Returns span on the y-axis. This does not check if SkIRect is sorted, so the |
| result may be negative. This is safer than calling height() since height() might |
| overflow in its calculation. |
| |
| @return fBottom minus fTop cast to int64_t |
| */ |
| int64_t height64() const { return (int64_t)fBottom - (int64_t)fTop; } |
| |
| /** Returns true if fLeft is equal to or greater than fRight, or if fTop is equal |
| to or greater than fBottom. Call sort() to reverse rectangles with negative |
| width64() or height64(). |
| |
| @return true if width64() or height64() are zero or negative |
| */ |
| bool isEmpty64() const { return fRight <= fLeft || fBottom <= fTop; } |
| |
| /** Returns true if width() or height() are zero or negative. |
| |
| @return true if width() or height() are zero or negative |
| */ |
| bool isEmpty() const { |
| int64_t w = this->width64(); |
| int64_t h = this->height64(); |
| if (w <= 0 || h <= 0) { |
| return true; |
| } |
| // Return true if either exceeds int32_t |
| return !SkTFitsIn<int32_t>(w | h); |
| } |
| |
| /** Returns true if all members in a: fLeft, fTop, fRight, and fBottom; are |
| identical to corresponding members in b. |
| |
| @param a SkIRect to compare |
| @param b SkIRect to compare |
| @return true if members are equal |
| */ |
| friend bool operator==(const SkIRect& a, const SkIRect& b) { |
| return !memcmp(&a, &b, sizeof(a)); |
| } |
| |
| /** Returns true if any member in a: fLeft, fTop, fRight, and fBottom; is not |
| identical to the corresponding member in b. |
| |
| @param a SkIRect to compare |
| @param b SkIRect to compare |
| @return true if members are not equal |
| */ |
| friend bool operator!=(const SkIRect& a, const SkIRect& b) { |
| return !(a == b); |
| } |
| |
| /** Sets SkIRect to (0, 0, 0, 0). |
| |
| Many other rectangles are empty; if left is equal to or greater than right, |
| or if top is equal to or greater than bottom. Setting all members to zero |
| is a convenience, but does not designate a special empty rectangle. |
| */ |
| void setEmpty() { memset(this, 0, sizeof(*this)); } |
| |
| /** Sets SkIRect to (left, top, right, bottom). |
| left and right are not sorted; left is not necessarily less than right. |
| top and bottom are not sorted; top is not necessarily less than bottom. |
| |
| @param left stored in fLeft |
| @param top stored in fTop |
| @param right stored in fRight |
| @param bottom stored in fBottom |
| */ |
| void setLTRB(int32_t left, int32_t top, int32_t right, int32_t bottom) { |
| fLeft = left; |
| fTop = top; |
| fRight = right; |
| fBottom = bottom; |
| } |
| |
| /** Sets SkIRect to: (x, y, x + width, y + height). |
| Does not validate input; width or height may be negative. |
| |
| @param x stored in fLeft |
| @param y stored in fTop |
| @param width added to x and stored in fRight |
| @param height added to y and stored in fBottom |
| */ |
| void setXYWH(int32_t x, int32_t y, int32_t width, int32_t height) { |
| fLeft = x; |
| fTop = y; |
| fRight = Sk32_sat_add(x, width); |
| fBottom = Sk32_sat_add(y, height); |
| } |
| |
| void setWH(int32_t width, int32_t height) { |
| fLeft = 0; |
| fTop = 0; |
| fRight = width; |
| fBottom = height; |
| } |
| |
| void setSize(SkISize size) { |
| fLeft = 0; |
| fTop = 0; |
| fRight = size.width(); |
| fBottom = size.height(); |
| } |
| |
| /** Returns SkIRect offset by (dx, dy). |
| |
| If dx is negative, SkIRect returned is moved to the left. |
| If dx is positive, SkIRect returned is moved to the right. |
| If dy is negative, SkIRect returned is moved upward. |
| If dy is positive, SkIRect returned is moved downward. |
| |
| @param dx offset added to fLeft and fRight |
| @param dy offset added to fTop and fBottom |
| @return SkIRect offset by dx and dy, with original width and height |
| */ |
| constexpr SkIRect makeOffset(int32_t dx, int32_t dy) const { |
| return { |
| Sk32_sat_add(fLeft, dx), Sk32_sat_add(fTop, dy), |
| Sk32_sat_add(fRight, dx), Sk32_sat_add(fBottom, dy), |
| }; |
| } |
| |
| /** Returns SkIRect offset by (offset.x(), offset.y()). |
| |
| If offset.x() is negative, SkIRect returned is moved to the left. |
| If offset.x() is positive, SkIRect returned is moved to the right. |
| If offset.y() is negative, SkIRect returned is moved upward. |
| If offset.y() is positive, SkIRect returned is moved downward. |
| |
| @param offset translation vector |
| @return SkIRect translated by offset, with original width and height |
| */ |
| constexpr SkIRect makeOffset(SkIVector offset) const { |
| return this->makeOffset(offset.x(), offset.y()); |
| } |
| |
| /** Returns SkIRect, inset by (dx, dy). |
| |
| If dx is negative, SkIRect returned is wider. |
| If dx is positive, SkIRect returned is narrower. |
| If dy is negative, SkIRect returned is taller. |
| If dy is positive, SkIRect returned is shorter. |
| |
| @param dx offset added to fLeft and subtracted from fRight |
| @param dy offset added to fTop and subtracted from fBottom |
| @return SkIRect inset symmetrically left and right, top and bottom |
| */ |
| SkIRect makeInset(int32_t dx, int32_t dy) const { |
| return { |
| Sk32_sat_add(fLeft, dx), Sk32_sat_add(fTop, dy), |
| Sk32_sat_sub(fRight, dx), Sk32_sat_sub(fBottom, dy), |
| }; |
| } |
| |
| /** Returns SkIRect, outset by (dx, dy). |
| |
| If dx is negative, SkIRect returned is narrower. |
| If dx is positive, SkIRect returned is wider. |
| If dy is negative, SkIRect returned is shorter. |
| If dy is positive, SkIRect returned is taller. |
| |
| @param dx offset subtracted to fLeft and added from fRight |
| @param dy offset subtracted to fTop and added from fBottom |
| @return SkIRect outset symmetrically left and right, top and bottom |
| */ |
| SkIRect makeOutset(int32_t dx, int32_t dy) const { |
| return { |
| Sk32_sat_sub(fLeft, dx), Sk32_sat_sub(fTop, dy), |
| Sk32_sat_add(fRight, dx), Sk32_sat_add(fBottom, dy), |
| }; |
| } |
| |
| /** Offsets SkIRect by adding dx to fLeft, fRight; and by adding dy to fTop, fBottom. |
| |
| If dx is negative, moves SkIRect returned to the left. |
| If dx is positive, moves SkIRect returned to the right. |
| If dy is negative, moves SkIRect returned upward. |
| If dy is positive, moves SkIRect returned downward. |
| |
| @param dx offset added to fLeft and fRight |
| @param dy offset added to fTop and fBottom |
| */ |
| void offset(int32_t dx, int32_t dy) { |
| fLeft = Sk32_sat_add(fLeft, dx); |
| fTop = Sk32_sat_add(fTop, dy); |
| fRight = Sk32_sat_add(fRight, dx); |
| fBottom = Sk32_sat_add(fBottom, dy); |
| } |
| |
| /** Offsets SkIRect by adding delta.fX to fLeft, fRight; and by adding delta.fY to |
| fTop, fBottom. |
| |
| If delta.fX is negative, moves SkIRect returned to the left. |
| If delta.fX is positive, moves SkIRect returned to the right. |
| If delta.fY is negative, moves SkIRect returned upward. |
| If delta.fY is positive, moves SkIRect returned downward. |
| |
| @param delta offset added to SkIRect |
| */ |
| void offset(const SkIPoint& delta) { |
| this->offset(delta.fX, delta.fY); |
| } |
| |
| /** Offsets SkIRect so that fLeft equals newX, and fTop equals newY. width and height |
| are unchanged. |
| |
| @param newX stored in fLeft, preserving width() |
| @param newY stored in fTop, preserving height() |
| */ |
| void offsetTo(int32_t newX, int32_t newY) { |
| fRight = Sk64_pin_to_s32((int64_t)fRight + newX - fLeft); |
| fBottom = Sk64_pin_to_s32((int64_t)fBottom + newY - fTop); |
| fLeft = newX; |
| fTop = newY; |
| } |
| |
| /** Insets SkIRect by (dx,dy). |
| |
| If dx is positive, makes SkIRect narrower. |
| If dx is negative, makes SkIRect wider. |
| If dy is positive, makes SkIRect shorter. |
| If dy is negative, makes SkIRect taller. |
| |
| @param dx offset added to fLeft and subtracted from fRight |
| @param dy offset added to fTop and subtracted from fBottom |
| */ |
| void inset(int32_t dx, int32_t dy) { |
| fLeft = Sk32_sat_add(fLeft, dx); |
| fTop = Sk32_sat_add(fTop, dy); |
| fRight = Sk32_sat_sub(fRight, dx); |
| fBottom = Sk32_sat_sub(fBottom, dy); |
| } |
| |
| /** Outsets SkIRect by (dx, dy). |
| |
| If dx is positive, makes SkIRect wider. |
| If dx is negative, makes SkIRect narrower. |
| If dy is positive, makes SkIRect taller. |
| If dy is negative, makes SkIRect shorter. |
| |
| @param dx subtracted to fLeft and added from fRight |
| @param dy subtracted to fTop and added from fBottom |
| */ |
| void outset(int32_t dx, int32_t dy) { this->inset(-dx, -dy); } |
| |
| /** Adjusts SkIRect by adding dL to fLeft, dT to fTop, dR to fRight, and dB to fBottom. |
| |
| If dL is positive, narrows SkIRect on the left. If negative, widens it on the left. |
| If dT is positive, shrinks SkIRect on the top. If negative, lengthens it on the top. |
| If dR is positive, narrows SkIRect on the right. If negative, widens it on the right. |
| If dB is positive, shrinks SkIRect on the bottom. If negative, lengthens it on the bottom. |
| |
| The resulting SkIRect is not checked for validity. Thus, if the resulting SkIRect left is |
| greater than right, the SkIRect will be considered empty. Call sort() after this call |
| if that is not the desired behavior. |
| |
| @param dL offset added to fLeft |
| @param dT offset added to fTop |
| @param dR offset added to fRight |
| @param dB offset added to fBottom |
| */ |
| void adjust(int32_t dL, int32_t dT, int32_t dR, int32_t dB) { |
| fLeft = Sk32_sat_add(fLeft, dL); |
| fTop = Sk32_sat_add(fTop, dT); |
| fRight = Sk32_sat_add(fRight, dR); |
| fBottom = Sk32_sat_add(fBottom, dB); |
| } |
| |
| /** Returns true if: fLeft <= x < fRight && fTop <= y < fBottom. |
| Returns false if SkIRect is empty. |
| |
| Considers input to describe constructed SkIRect: (x, y, x + 1, y + 1) and |
| returns true if constructed area is completely enclosed by SkIRect area. |
| |
| @param x test SkIPoint x-coordinate |
| @param y test SkIPoint y-coordinate |
| @return true if (x, y) is inside SkIRect |
| */ |
| bool contains(int32_t x, int32_t y) const { |
| return x >= fLeft && x < fRight && y >= fTop && y < fBottom; |
| } |
| |
| /** Returns true if SkIRect contains r. |
| Returns false if SkIRect is empty or r is empty. |
| |
| SkIRect contains r when SkIRect area completely includes r area. |
| |
| @param r SkIRect contained |
| @return true if all sides of SkIRect are outside r |
| */ |
| bool contains(const SkIRect& r) const { |
| return !r.isEmpty() && !this->isEmpty() && // check for empties |
| fLeft <= r.fLeft && fTop <= r.fTop && |
| fRight >= r.fRight && fBottom >= r.fBottom; |
| } |
| |
| /** Returns true if SkIRect contains r. |
| Returns false if SkIRect is empty or r is empty. |
| |
| SkIRect contains r when SkIRect area completely includes r area. |
| |
| @param r SkRect contained |
| @return true if all sides of SkIRect are outside r |
| */ |
| inline bool contains(const SkRect& r) const; |
| |
| /** Returns true if SkIRect contains construction. |
| Asserts if SkIRect is empty or construction is empty, and if SK_DEBUG is defined. |
| |
| Return is undefined if SkIRect is empty or construction is empty. |
| |
| @param r SkIRect contained |
| @return true if all sides of SkIRect are outside r |
| */ |
| bool containsNoEmptyCheck(const SkIRect& r) const { |
| SkASSERT(fLeft < fRight && fTop < fBottom); |
| SkASSERT(r.fLeft < r.fRight && r.fTop < r.fBottom); |
| return fLeft <= r.fLeft && fTop <= r.fTop && fRight >= r.fRight && fBottom >= r.fBottom; |
| } |
| |
| /** Returns true if SkIRect intersects r, and sets SkIRect to intersection. |
| Returns false if SkIRect does not intersect r, and leaves SkIRect unchanged. |
| |
| Returns false if either r or SkIRect is empty, leaving SkIRect unchanged. |
| |
| @param r limit of result |
| @return true if r and SkIRect have area in common |
| */ |
| bool intersect(const SkIRect& r) { |
| return this->intersect(*this, r); |
| } |
| |
| /** Returns true if a intersects b, and sets SkIRect to intersection. |
| Returns false if a does not intersect b, and leaves SkIRect unchanged. |
| |
| Returns false if either a or b is empty, leaving SkIRect unchanged. |
| |
| @param a SkIRect to intersect |
| @param b SkIRect to intersect |
| @return true if a and b have area in common |
| */ |
| bool SK_WARN_UNUSED_RESULT intersect(const SkIRect& a, const SkIRect& b); |
| |
| /** Returns true if a intersects b. |
| Returns false if either a or b is empty, or do not intersect. |
| |
| @param a SkIRect to intersect |
| @param b SkIRect to intersect |
| @return true if a and b have area in common |
| */ |
| static bool Intersects(const SkIRect& a, const SkIRect& b) { |
| return SkIRect{}.intersect(a, b); |
| } |
| |
| /** Sets SkIRect to the union of itself and r. |
| |
| Has no effect if r is empty. Otherwise, if SkIRect is empty, sets SkIRect to r. |
| |
| @param r expansion SkIRect |
| |
| example: https://fiddle.skia.org/c/@IRect_join_2 |
| */ |
| void join(const SkIRect& r); |
| |
| /** Swaps fLeft and fRight if fLeft is greater than fRight; and swaps |
| fTop and fBottom if fTop is greater than fBottom. Result may be empty, |
| and width() and height() will be zero or positive. |
| */ |
| void sort() { |
| using std::swap; |
| if (fLeft > fRight) { |
| swap(fLeft, fRight); |
| } |
| if (fTop > fBottom) { |
| swap(fTop, fBottom); |
| } |
| } |
| |
| /** Returns SkIRect with fLeft and fRight swapped if fLeft is greater than fRight; and |
| with fTop and fBottom swapped if fTop is greater than fBottom. Result may be empty; |
| and width() and height() will be zero or positive. |
| |
| @return sorted SkIRect |
| */ |
| SkIRect makeSorted() const { |
| return MakeLTRB(std::min(fLeft, fRight), std::min(fTop, fBottom), |
| std::max(fLeft, fRight), std::max(fTop, fBottom)); |
| } |
| }; |
| |
| /** \struct SkRect |
| SkRect holds four SkScalar coordinates describing the upper and |
| lower bounds of a rectangle. SkRect may be created from outer bounds or |
| from position, width, and height. SkRect describes an area; if its right |
| is less than or equal to its left, or if its bottom is less than or equal to |
| its top, it is considered empty. |
| */ |
| struct SK_API SkRect { |
| SkScalar fLeft; //!< smaller x-axis bounds |
| SkScalar fTop; //!< smaller y-axis bounds |
| SkScalar fRight; //!< larger x-axis bounds |
| SkScalar fBottom; //!< larger y-axis bounds |
| |
| /** Returns constructed SkRect set to (0, 0, 0, 0). |
| Many other rectangles are empty; if left is equal to or greater than right, |
| or if top is equal to or greater than bottom. Setting all members to zero |
| is a convenience, but does not designate a special empty rectangle. |
| |
| @return bounds (0, 0, 0, 0) |
| */ |
| static constexpr SkRect SK_WARN_UNUSED_RESULT MakeEmpty() { |
| return SkRect{0, 0, 0, 0}; |
| } |
| |
| /** Returns constructed SkRect set to SkScalar values (0, 0, w, h). Does not |
| validate input; w or h may be negative. |
| |
| Passing integer values may generate a compiler warning since SkRect cannot |
| represent 32-bit integers exactly. Use SkIRect for an exact integer rectangle. |
| |
| @param w SkScalar width of constructed SkRect |
| @param h SkScalar height of constructed SkRect |
| @return bounds (0, 0, w, h) |
| */ |
| static constexpr SkRect SK_WARN_UNUSED_RESULT MakeWH(SkScalar w, SkScalar h) { |
| return SkRect{0, 0, w, h}; |
| } |
| |
| /** Returns constructed SkRect set to integer values (0, 0, w, h). Does not validate |
| input; w or h may be negative. |
| |
| Use to avoid a compiler warning that input may lose precision when stored. |
| Use SkIRect for an exact integer rectangle. |
| |
| @param w integer width of constructed SkRect |
| @param h integer height of constructed SkRect |
| @return bounds (0, 0, w, h) |
| */ |
| static SkRect SK_WARN_UNUSED_RESULT MakeIWH(int w, int h) { |
| return {0, 0, SkIntToScalar(w), SkIntToScalar(h)}; |
| } |
| |
| /** Returns constructed SkRect set to (0, 0, size.width(), size.height()). Does not |
| validate input; size.width() or size.height() may be negative. |
| |
| @param size SkScalar values for SkRect width and height |
| @return bounds (0, 0, size.width(), size.height()) |
| */ |
| static constexpr SkRect SK_WARN_UNUSED_RESULT MakeSize(const SkSize& size) { |
| return SkRect{0, 0, size.fWidth, size.fHeight}; |
| } |
| |
| /** Returns constructed SkRect set to (l, t, r, b). Does not sort input; SkRect may |
| result in fLeft greater than fRight, or fTop greater than fBottom. |
| |
| @param l SkScalar stored in fLeft |
| @param t SkScalar stored in fTop |
| @param r SkScalar stored in fRight |
| @param b SkScalar stored in fBottom |
| @return bounds (l, t, r, b) |
| */ |
| static constexpr SkRect SK_WARN_UNUSED_RESULT MakeLTRB(SkScalar l, SkScalar t, SkScalar r, |
| SkScalar b) { |
| return SkRect {l, t, r, b}; |
| } |
| |
| /** Returns constructed SkRect set to (x, y, x + w, y + h). |
| Does not validate input; w or h may be negative. |
| |
| @param x stored in fLeft |
| @param y stored in fTop |
| @param w added to x and stored in fRight |
| @param h added to y and stored in fBottom |
| @return bounds at (x, y) with width w and height h |
| */ |
| static constexpr SkRect SK_WARN_UNUSED_RESULT MakeXYWH(SkScalar x, SkScalar y, SkScalar w, |
| SkScalar h) { |
| return SkRect {x, y, x + w, y + h}; |
| } |
| |
| /** Returns constructed SkIRect set to (0, 0, size.width(), size.height()). |
| Does not validate input; size.width() or size.height() may be negative. |
| |
| @param size integer values for SkRect width and height |
| @return bounds (0, 0, size.width(), size.height()) |
| */ |
| static SkRect Make(const SkISize& size) { |
| return MakeIWH(size.width(), size.height()); |
| } |
| |
| /** Returns constructed SkIRect set to irect, promoting integers to scalar. |
| Does not validate input; fLeft may be greater than fRight, fTop may be greater |
| than fBottom. |
| |
| @param irect integer unsorted bounds |
| @return irect members converted to SkScalar |
| */ |
| static SkRect SK_WARN_UNUSED_RESULT Make(const SkIRect& irect) { |
| return { |
| SkIntToScalar(irect.fLeft), SkIntToScalar(irect.fTop), |
| SkIntToScalar(irect.fRight), SkIntToScalar(irect.fBottom) |
| }; |
| } |
| |
| /** Returns true if fLeft is equal to or greater than fRight, or if fTop is equal |
| to or greater than fBottom. Call sort() to reverse rectangles with negative |
| width() or height(). |
| |
| @return true if width() or height() are zero or negative |
| */ |
| bool isEmpty() const { |
| // We write it as the NOT of a non-empty rect, so we will return true if any values |
| // are NaN. |
| return !(fLeft < fRight && fTop < fBottom); |
| } |
| |
| /** Returns true if fLeft is equal to or less than fRight, or if fTop is equal |
| to or less than fBottom. Call sort() to reverse rectangles with negative |
| width() or height(). |
| |
| @return true if width() or height() are zero or positive |
| */ |
| bool isSorted() const { return fLeft <= fRight && fTop <= fBottom; } |
| |
| /** Returns true if all values in the rectangle are finite: SK_ScalarMin or larger, |
| and SK_ScalarMax or smaller. |
| |
| @return true if no member is infinite or NaN |
| */ |
| bool isFinite() const { |
| float accum = 0; |
| accum *= fLeft; |
| accum *= fTop; |
| accum *= fRight; |
| accum *= fBottom; |
| |
| // accum is either NaN or it is finite (zero). |
| SkASSERT(0 == accum || SkScalarIsNaN(accum)); |
| |
| // value==value will be true iff value is not NaN |
| // TODO: is it faster to say !accum or accum==accum? |
| return !SkScalarIsNaN(accum); |
| } |
| |
| /** Returns left edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid. |
| Call sort() to reverse fLeft and fRight if needed. |
| |
| @return fLeft |
| */ |
| SkScalar x() const { return fLeft; } |
| |
| /** Returns top edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid, |
| and sort() to reverse fTop and fBottom if needed. |
| |
| @return fTop |
| */ |
| SkScalar y() const { return fTop; } |
| |
| /** Returns left edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid. |
| Call sort() to reverse fLeft and fRight if needed. |
| |
| @return fLeft |
| */ |
| SkScalar left() const { return fLeft; } |
| |
| /** Returns top edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid, |
| and sort() to reverse fTop and fBottom if needed. |
| |
| @return fTop |
| */ |
| SkScalar top() const { return fTop; } |
| |
| /** Returns right edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid. |
| Call sort() to reverse fLeft and fRight if needed. |
| |
| @return fRight |
| */ |
| SkScalar right() const { return fRight; } |
| |
| /** Returns bottom edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid, |
| and sort() to reverse fTop and fBottom if needed. |
| |
| @return fBottom |
| */ |
| SkScalar bottom() const { return fBottom; } |
| |
| /** Returns span on the x-axis. This does not check if SkRect is sorted, or if |
| result fits in 32-bit float; result may be negative or infinity. |
| |
| @return fRight minus fLeft |
| */ |
| SkScalar width() const { return fRight - fLeft; } |
| |
| /** Returns span on the y-axis. This does not check if SkRect is sorted, or if |
| result fits in 32-bit float; result may be negative or infinity. |
| |
| @return fBottom minus fTop |
| */ |
| SkScalar height() const { return fBottom - fTop; } |
| |
| /** Returns average of left edge and right edge. Result does not change if SkRect |
| is sorted. Result may overflow to infinity if SkRect is far from the origin. |
| |
| @return midpoint on x-axis |
| */ |
| SkScalar centerX() const { |
| // don't use SkScalarHalf(fLeft + fBottom) as that might overflow before the 0.5 |
| return SkScalarHalf(fLeft) + SkScalarHalf(fRight); |
| } |
| |
| /** Returns average of top edge and bottom edge. Result does not change if SkRect |
| is sorted. |
| |
| @return midpoint on y-axis |
| */ |
| SkScalar centerY() const { |
| // don't use SkScalarHalf(fTop + fBottom) as that might overflow before the 0.5 |
| return SkScalarHalf(fTop) + SkScalarHalf(fBottom); |
| } |
| |
| /** Returns true if all members in a: fLeft, fTop, fRight, and fBottom; are |
| equal to the corresponding members in b. |
| |
| a and b are not equal if either contain NaN. a and b are equal if members |
| contain zeroes with different signs. |
| |
| @param a SkRect to compare |
| @param b SkRect to compare |
| @return true if members are equal |
| */ |
| friend bool operator==(const SkRect& a, const SkRect& b) { |
| return SkScalarsEqual((const SkScalar*)&a, (const SkScalar*)&b, 4); |
| } |
| |
| /** Returns true if any in a: fLeft, fTop, fRight, and fBottom; does not |
| equal the corresponding members in b. |
| |
| a and b are not equal if either contain NaN. a and b are equal if members |
| contain zeroes with different signs. |
| |
| @param a SkRect to compare |
| @param b SkRect to compare |
| @return true if members are not equal |
| */ |
| friend bool operator!=(const SkRect& a, const SkRect& b) { |
| return !SkScalarsEqual((const SkScalar*)&a, (const SkScalar*)&b, 4); |
| } |
| |
| /** Returns four points in quad that enclose SkRect ordered as: top-left, top-right, |
| bottom-right, bottom-left. |
| |
| TODO: Consider adding parameter to control whether quad is clockwise or counterclockwise. |
| |
| @param quad storage for corners of SkRect |
| |
| example: https://fiddle.skia.org/c/@Rect_toQuad |
| */ |
| void toQuad(SkPoint quad[4]) const; |
| |
| /** Sets SkRect to (0, 0, 0, 0). |
| |
| Many other rectangles are empty; if left is equal to or greater than right, |
| or if top is equal to or greater than bottom. Setting all members to zero |
| is a convenience, but does not designate a special empty rectangle. |
| */ |
| void setEmpty() { *this = MakeEmpty(); } |
| |
| /** Sets SkRect to src, promoting src members from integer to scalar. |
| Very large values in src may lose precision. |
| |
| @param src integer SkRect |
| */ |
| void set(const SkIRect& src) { |
| fLeft = SkIntToScalar(src.fLeft); |
| fTop = SkIntToScalar(src.fTop); |
| fRight = SkIntToScalar(src.fRight); |
| fBottom = SkIntToScalar(src.fBottom); |
| } |
| |
| /** Sets SkRect to (left, top, right, bottom). |
| left and right are not sorted; left is not necessarily less than right. |
| top and bottom are not sorted; top is not necessarily less than bottom. |
| |
| @param left stored in fLeft |
| @param top stored in fTop |
| @param right stored in fRight |
| @param bottom stored in fBottom |
| */ |
| void setLTRB(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom) { |
| fLeft = left; |
| fTop = top; |
| fRight = right; |
| fBottom = bottom; |
| } |
| |
| /** Sets to bounds of SkPoint array with count entries. If count is zero or smaller, |
| or if SkPoint array contains an infinity or NaN, sets to (0, 0, 0, 0). |
| |
| Result is either empty or sorted: fLeft is less than or equal to fRight, and |
| fTop is less than or equal to fBottom. |
| |
| @param pts SkPoint array |
| @param count entries in array |
| */ |
| void setBounds(const SkPoint pts[], int count) { |
| (void)this->setBoundsCheck(pts, count); |
| } |
| |
| /** Sets to bounds of SkPoint array with count entries. Returns false if count is |
| zero or smaller, or if SkPoint array contains an infinity or NaN; in these cases |
| sets SkRect to (0, 0, 0, 0). |
| |
| Result is either empty or sorted: fLeft is less than or equal to fRight, and |
| fTop is less than or equal to fBottom. |
| |
| @param pts SkPoint array |
| @param count entries in array |
| @return true if all SkPoint values are finite |
| |
| example: https://fiddle.skia.org/c/@Rect_setBoundsCheck |
| */ |
| bool setBoundsCheck(const SkPoint pts[], int count); |
| |
| /** Sets to bounds of SkPoint pts array with count entries. If any SkPoint in pts |
| contains infinity or NaN, all SkRect dimensions are set to NaN. |
| |
| @param pts SkPoint array |
| @param count entries in array |
| |
| example: https://fiddle.skia.org/c/@Rect_setBoundsNoCheck |
| */ |
| void setBoundsNoCheck(const SkPoint pts[], int count); |
| |
| /** Sets bounds to the smallest SkRect enclosing SkPoint p0 and p1. The result is |
| sorted and may be empty. Does not check to see if values are finite. |
| |
| @param p0 corner to include |
| @param p1 corner to include |
| */ |
| void set(const SkPoint& p0, const SkPoint& p1) { |
| fLeft = std::min(p0.fX, p1.fX); |
| fRight = std::max(p0.fX, p1.fX); |
| fTop = std::min(p0.fY, p1.fY); |
| fBottom = std::max(p0.fY, p1.fY); |
| } |
| |
| /** Sets SkRect to (x, y, x + width, y + height). |
| Does not validate input; width or height may be negative. |
| |
| @param x stored in fLeft |
| @param y stored in fTop |
| @param width added to x and stored in fRight |
| @param height added to y and stored in fBottom |
| */ |
| void setXYWH(SkScalar x, SkScalar y, SkScalar width, SkScalar height) { |
| fLeft = x; |
| fTop = y; |
| fRight = x + width; |
| fBottom = y + height; |
| } |
| |
| /** Sets SkRect to (0, 0, width, height). Does not validate input; |
| width or height may be negative. |
| |
| @param width stored in fRight |
| @param height stored in fBottom |
| */ |
| void setWH(SkScalar width, SkScalar height) { |
| fLeft = 0; |
| fTop = 0; |
| fRight = width; |
| fBottom = height; |
| } |
| void setIWH(int32_t width, int32_t height) { |
| this->setWH(SkIntToScalar(width), SkIntToScalar(height)); |
| } |
| |
| /** Returns SkRect offset by (dx, dy). |
| |
| If dx is negative, SkRect returned is moved to the left. |
| If dx is positive, SkRect returned is moved to the right. |
| If dy is negative, SkRect returned is moved upward. |
| If dy is positive, SkRect returned is moved downward. |
| |
| @param dx added to fLeft and fRight |
| @param dy added to fTop and fBottom |
| @return SkRect offset on axes, with original width and height |
| */ |
| constexpr SkRect makeOffset(SkScalar dx, SkScalar dy) const { |
| return MakeLTRB(fLeft + dx, fTop + dy, fRight + dx, fBottom + dy); |
| } |
| |
| /** Returns SkRect offset by v. |
| |
| @param v added to rect |
| @return SkRect offset on axes, with original width and height |
| */ |
| constexpr SkRect makeOffset(SkVector v) const { return this->makeOffset(v.x(), v.y()); } |
| |
| /** Returns SkRect, inset by (dx, dy). |
| |
| If dx is negative, SkRect returned is wider. |
| If dx is positive, SkRect returned is narrower. |
| If dy is negative, SkRect returned is taller. |
| If dy is positive, SkRect returned is shorter. |
| |
| @param dx added to fLeft and subtracted from fRight |
| @param dy added to fTop and subtracted from fBottom |
| @return SkRect inset symmetrically left and right, top and bottom |
| */ |
| SkRect makeInset(SkScalar dx, SkScalar dy) const { |
| return MakeLTRB(fLeft + dx, fTop + dy, fRight - dx, fBottom - dy); |
| } |
| |
| /** Returns SkRect, outset by (dx, dy). |
| |
| If dx is negative, SkRect returned is narrower. |
| If dx is positive, SkRect returned is wider. |
| If dy is negative, SkRect returned is shorter. |
| If dy is positive, SkRect returned is taller. |
| |
| @param dx subtracted to fLeft and added from fRight |
| @param dy subtracted to fTop and added from fBottom |
| @return SkRect outset symmetrically left and right, top and bottom |
| */ |
| SkRect makeOutset(SkScalar dx, SkScalar dy) const { |
| return MakeLTRB(fLeft - dx, fTop - dy, fRight + dx, fBottom + dy); |
| } |
| |
| /** Offsets SkRect by adding dx to fLeft, fRight; and by adding dy to fTop, fBottom. |
| |
| If dx is negative, moves SkRect to the left. |
| If dx is positive, moves SkRect to the right. |
| If dy is negative, moves SkRect upward. |
| If dy is positive, moves SkRect downward. |
| |
| @param dx offset added to fLeft and fRight |
| @param dy offset added to fTop and fBottom |
| */ |
| void offset(SkScalar dx, SkScalar dy) { |
| fLeft += dx; |
| fTop += dy; |
| fRight += dx; |
| fBottom += dy; |
| } |
| |
| /** Offsets SkRect by adding delta.fX to fLeft, fRight; and by adding delta.fY to |
| fTop, fBottom. |
| |
| If delta.fX is negative, moves SkRect to the left. |
| If delta.fX is positive, moves SkRect to the right. |
| If delta.fY is negative, moves SkRect upward. |
| If delta.fY is positive, moves SkRect downward. |
| |
| @param delta added to SkRect |
| */ |
| void offset(const SkPoint& delta) { |
| this->offset(delta.fX, delta.fY); |
| } |
| |
| /** Offsets SkRect so that fLeft equals newX, and fTop equals newY. width and height |
| are unchanged. |
| |
| @param newX stored in fLeft, preserving width() |
| @param newY stored in fTop, preserving height() |
| */ |
| void offsetTo(SkScalar newX, SkScalar newY) { |
| fRight += newX - fLeft; |
| fBottom += newY - fTop; |
| fLeft = newX; |
| fTop = newY; |
| } |
| |
| /** Insets SkRect by (dx, dy). |
| |
| If dx is positive, makes SkRect narrower. |
| If dx is negative, makes SkRect wider. |
| If dy is positive, makes SkRect shorter. |
| If dy is negative, makes SkRect taller. |
| |
| @param dx added to fLeft and subtracted from fRight |
| @param dy added to fTop and subtracted from fBottom |
| */ |
| void inset(SkScalar dx, SkScalar dy) { |
| fLeft += dx; |
| fTop += dy; |
| fRight -= dx; |
| fBottom -= dy; |
| } |
| |
| /** Outsets SkRect by (dx, dy). |
| |
| If dx is positive, makes SkRect wider. |
| If dx is negative, makes SkRect narrower. |
| If dy is positive, makes SkRect taller. |
| If dy is negative, makes SkRect shorter. |
| |
| @param dx subtracted to fLeft and added from fRight |
| @param dy subtracted to fTop and added from fBottom |
| */ |
| void outset(SkScalar dx, SkScalar dy) { this->inset(-dx, -dy); } |
| |
| /** Returns true if SkRect intersects r, and sets SkRect to intersection. |
| Returns false if SkRect does not intersect r, and leaves SkRect unchanged. |
| |
| Returns false if either r or SkRect is empty, leaving SkRect unchanged. |
| |
| @param r limit of result |
| @return true if r and SkRect have area in common |
| |
| example: https://fiddle.skia.org/c/@Rect_intersect |
| */ |
| bool intersect(const SkRect& r); |
| |
| /** Returns true if a intersects b, and sets SkRect to intersection. |
| Returns false if a does not intersect b, and leaves SkRect unchanged. |
| |
| Returns false if either a or b is empty, leaving SkRect unchanged. |
| |
| @param a SkRect to intersect |
| @param b SkRect to intersect |
| @return true if a and b have area in common |
| */ |
| bool SK_WARN_UNUSED_RESULT intersect(const SkRect& a, const SkRect& b); |
| |
| |
| private: |
| static bool Intersects(SkScalar al, SkScalar at, SkScalar ar, SkScalar ab, |
| SkScalar bl, SkScalar bt, SkScalar br, SkScalar bb) { |
| SkScalar L = std::max(al, bl); |
| SkScalar R = std::min(ar, br); |
| SkScalar T = std::max(at, bt); |
| SkScalar B = std::min(ab, bb); |
| return L < R && T < B; |
| } |
| |
| public: |
| |
| /** Returns true if SkRect intersects r. |
| Returns false if either r or SkRect is empty, or do not intersect. |
| |
| @param r SkRect to intersect |
| @return true if r and SkRect have area in common |
| */ |
| bool intersects(const SkRect& r) const { |
| return Intersects(fLeft, fTop, fRight, fBottom, |
| r.fLeft, r.fTop, r.fRight, r.fBottom); |
| } |
| |
| /** Returns true if a intersects b. |
| Returns false if either a or b is empty, or do not intersect. |
| |
| @param a SkRect to intersect |
| @param b SkRect to intersect |
| @return true if a and b have area in common |
| */ |
| static bool Intersects(const SkRect& a, const SkRect& b) { |
| return Intersects(a.fLeft, a.fTop, a.fRight, a.fBottom, |
| b.fLeft, b.fTop, b.fRight, b.fBottom); |
| } |
| |
| /** Sets SkRect to the union of itself and r. |
| |
| Has no effect if r is empty. Otherwise, if SkRect is empty, sets |
| SkRect to r. |
| |
| @param r expansion SkRect |
| |
| example: https://fiddle.skia.org/c/@Rect_join_2 |
| */ |
| void join(const SkRect& r); |
| |
| /** Sets SkRect to the union of itself and r. |
| |
| Asserts if r is empty and SK_DEBUG is defined. |
| If SkRect is empty, sets SkRect to r. |
| |
| May produce incorrect results if r is empty. |
| |
| @param r expansion SkRect |
| */ |
| void joinNonEmptyArg(const SkRect& r) { |
| SkASSERT(!r.isEmpty()); |
| // if we are empty, just assign |
| if (fLeft >= fRight || fTop >= fBottom) { |
| *this = r; |
| } else { |
| this->joinPossiblyEmptyRect(r); |
| } |
| } |
| |
| /** Sets SkRect to the union of itself and the construction. |
| |
| May produce incorrect results if SkRect or r is empty. |
| |
| @param r expansion SkRect |
| */ |
| void joinPossiblyEmptyRect(const SkRect& r) { |
| fLeft = std::min(fLeft, r.left()); |
| fTop = std::min(fTop, r.top()); |
| fRight = std::max(fRight, r.right()); |
| fBottom = std::max(fBottom, r.bottom()); |
| } |
| |
| /** Returns true if: fLeft <= x < fRight && fTop <= y < fBottom. |
| Returns false if SkRect is empty. |
| |
| @param x test SkPoint x-coordinate |
| @param y test SkPoint y-coordinate |
| @return true if (x, y) is inside SkRect |
| */ |
| bool contains(SkScalar x, SkScalar y) const { |
| return x >= fLeft && x < fRight && y >= fTop && y < fBottom; |
| } |
| |
| /** Returns true if SkRect contains r. |
| Returns false if SkRect is empty or r is empty. |
| |
| SkRect contains r when SkRect area completely includes r area. |
| |
| @param r SkRect contained |
| @return true if all sides of SkRect are outside r |
| */ |
| bool contains(const SkRect& r) const { |
| // todo: can we eliminate the this->isEmpty check? |
| return !r.isEmpty() && !this->isEmpty() && |
| fLeft <= r.fLeft && fTop <= r.fTop && |
| fRight >= r.fRight && fBottom >= r.fBottom; |
| } |
| |
| /** Returns true if SkRect contains r. |
| Returns false if SkRect is empty or r is empty. |
| |
| SkRect contains r when SkRect area completely includes r area. |
| |
| @param r SkIRect contained |
| @return true if all sides of SkRect are outside r |
| */ |
| bool contains(const SkIRect& r) const { |
| // todo: can we eliminate the this->isEmpty check? |
| return !r.isEmpty() && !this->isEmpty() && |
| fLeft <= SkIntToScalar(r.fLeft) && fTop <= SkIntToScalar(r.fTop) && |
| fRight >= SkIntToScalar(r.fRight) && fBottom >= SkIntToScalar(r.fBottom); |
| } |
| |
| /** Sets SkIRect by adding 0.5 and discarding the fractional portion of SkRect |
| members, using (SkScalarRoundToInt(fLeft), SkScalarRoundToInt(fTop), |
| SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom)). |
| |
| @param dst storage for SkIRect |
| */ |
| void round(SkIRect* dst) const { |
| SkASSERT(dst); |
| dst->setLTRB(SkScalarRoundToInt(fLeft), SkScalarRoundToInt(fTop), |
| SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom)); |
| } |
| |
| /** Sets SkIRect by discarding the fractional portion of fLeft and fTop; and rounding |
| up fRight and fBottom, using |
| (SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop), |
| SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)). |
| |
| @param dst storage for SkIRect |
| */ |
| void roundOut(SkIRect* dst) const { |
| SkASSERT(dst); |
| dst->setLTRB(SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop), |
| SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)); |
| } |
| |
| /** Sets SkRect by discarding the fractional portion of fLeft and fTop; and rounding |
| up fRight and fBottom, using |
| (SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop), |
| SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)). |
| |
| @param dst storage for SkRect |
| */ |
| void roundOut(SkRect* dst) const { |
| dst->setLTRB(SkScalarFloorToScalar(fLeft), SkScalarFloorToScalar(fTop), |
| SkScalarCeilToScalar(fRight), SkScalarCeilToScalar(fBottom)); |
| } |
| |
| /** Sets SkRect by rounding up fLeft and fTop; and discarding the fractional portion |
| of fRight and fBottom, using |
| (SkScalarCeilToInt(fLeft), SkScalarCeilToInt(fTop), |
| SkScalarFloorToInt(fRight), SkScalarFloorToInt(fBottom)). |
| |
| @param dst storage for SkIRect |
| */ |
| void roundIn(SkIRect* dst) const { |
| SkASSERT(dst); |
| dst->setLTRB(SkScalarCeilToInt(fLeft), SkScalarCeilToInt(fTop), |
| SkScalarFloorToInt(fRight), SkScalarFloorToInt(fBottom)); |
| } |
| |
| /** Returns SkIRect by adding 0.5 and discarding the fractional portion of SkRect |
| members, using (SkScalarRoundToInt(fLeft), SkScalarRoundToInt(fTop), |
| SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom)). |
| |
| @return rounded SkIRect |
| */ |
| SkIRect round() const { |
| SkIRect ir; |
| this->round(&ir); |
| return ir; |
| } |
| |
| /** Sets SkIRect by discarding the fractional portion of fLeft and fTop; and rounding |
| up fRight and fBottom, using |
| (SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop), |
| SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)). |
| |
| @return rounded SkIRect |
| */ |
| SkIRect roundOut() const { |
| SkIRect ir; |
| this->roundOut(&ir); |
| return ir; |
| } |
| /** Sets SkIRect by rounding up fLeft and fTop; and discarding the fractional portion |
| of fRight and fBottom, using |
| (SkScalarCeilToInt(fLeft), SkScalarCeilToInt(fTop), |
| SkScalarFloorToInt(fRight), SkScalarFloorToInt(fBottom)). |
| |
| @return rounded SkIRect |
| */ |
| SkIRect roundIn() const { |
| SkIRect ir; |
| this->roundIn(&ir); |
| return ir; |
| } |
| |
| /** Swaps fLeft and fRight if fLeft is greater than fRight; and swaps |
| fTop and fBottom if fTop is greater than fBottom. Result may be empty; |
| and width() and height() will be zero or positive. |
| */ |
| void sort() { |
| using std::swap; |
| if (fLeft > fRight) { |
| swap(fLeft, fRight); |
| } |
| |
| if (fTop > fBottom) { |
| swap(fTop, fBottom); |
| } |
| } |
| |
| /** Returns SkRect with fLeft and fRight swapped if fLeft is greater than fRight; and |
| with fTop and fBottom swapped if fTop is greater than fBottom. Result may be empty; |
| and width() and height() will be zero or positive. |
| |
| @return sorted SkRect |
| */ |
| SkRect makeSorted() const { |
| return MakeLTRB(std::min(fLeft, fRight), std::min(fTop, fBottom), |
| std::max(fLeft, fRight), std::max(fTop, fBottom)); |
| } |
| |
| /** Returns pointer to first scalar in SkRect, to treat it as an array with four |
| entries. |
| |
| @return pointer to fLeft |
| */ |
| const SkScalar* asScalars() const { return &fLeft; } |
| |
| /** Writes text representation of SkRect to standard output. Set asHex to true to |
| generate exact binary representations of floating point numbers. |
| |
| @param asHex true if SkScalar values are written as hexadecimal |
| |
| example: https://fiddle.skia.org/c/@Rect_dump |
| */ |
| void dump(bool asHex) const; |
| |
| /** Writes text representation of SkRect to standard output. The representation may be |
| directly compiled as C++ code. Floating point values are written |
| with limited precision; it may not be possible to reconstruct original SkRect |
| from output. |
| */ |
| void dump() const { this->dump(false); } |
| |
| /** Writes text representation of SkRect to standard output. The representation may be |
| directly compiled as C++ code. Floating point values are written |
| in hexadecimal to preserve their exact bit pattern. The output reconstructs the |
| original SkRect. |
| |
| Use instead of dump() when submitting |
| */ |
| void dumpHex() const { this->dump(true); } |
| }; |
| |
| inline bool SkIRect::contains(const SkRect& r) const { |
| return !r.isEmpty() && !this->isEmpty() && // check for empties |
| (SkScalar)fLeft <= r.fLeft && (SkScalar)fTop <= r.fTop && |
| (SkScalar)fRight >= r.fRight && (SkScalar)fBottom >= r.fBottom; |
| } |
| |
| #ifdef SKIA_STRUCTURED_BINDINGS_BACKPORT |
| template <> |
| struct CoercerToTuple<SkRect> { |
| static auto Coerce(SkRect&& t) { |
| return std::make_tuple(t.fLeft, t.fTop, t.fRight, t.fBottom); |
| } |
| static auto Coerce(const SkRect& t) { |
| return std::make_tuple(t.fLeft, t.fTop, t.fRight, t.fBottom); |
| } |
| }; |
| #endif |
| |
| #endif |
