| /* |
| ********************************************************************** |
| * Copyright (C) 1998-2010, International Business Machines |
| * Corporation and others. All Rights Reserved. |
| ********************************************************************** |
| * |
| * File ustring.h |
| * |
| * Modification History: |
| * |
| * Date Name Description |
| * 12/07/98 bertrand Creation. |
| ****************************************************************************** |
| */ |
| |
| #ifndef USTRING_H |
| #define USTRING_H |
| |
| #include "unicode/utypes.h" |
| #include "unicode/putil.h" |
| #include "unicode/uiter.h" |
| |
| /** Simple declaration for u_strToTitle() to avoid including unicode/ubrk.h. @stable ICU 2.1*/ |
| #ifndef UBRK_TYPEDEF_UBREAK_ITERATOR |
| # define UBRK_TYPEDEF_UBREAK_ITERATOR |
| typedef struct UBreakIterator UBreakIterator; |
| #endif |
| |
| /** |
| * \file |
| * \brief C API: Unicode string handling functions |
| * |
| * These C API functions provide general Unicode string handling. |
| * |
| * Some functions are equivalent in name, signature, and behavior to the ANSI C <string.h> |
| * functions. (For example, they do not check for bad arguments like NULL string pointers.) |
| * In some cases, only the thread-safe variant of such a function is implemented here |
| * (see u_strtok_r()). |
| * |
| * Other functions provide more Unicode-specific functionality like locale-specific |
| * upper/lower-casing and string comparison in code point order. |
| * |
| * ICU uses 16-bit Unicode (UTF-16) in the form of arrays of UChar code units. |
| * UTF-16 encodes each Unicode code point with either one or two UChar code units. |
| * (This is the default form of Unicode, and a forward-compatible extension of the original, |
| * fixed-width form that was known as UCS-2. UTF-16 superseded UCS-2 with Unicode 2.0 |
| * in 1996.) |
| * |
| * Some APIs accept a 32-bit UChar32 value for a single code point. |
| * |
| * ICU also handles 16-bit Unicode text with unpaired surrogates. |
| * Such text is not well-formed UTF-16. |
| * Code-point-related functions treat unpaired surrogates as surrogate code points, |
| * i.e., as separate units. |
| * |
| * Although UTF-16 is a variable-width encoding form (like some legacy multi-byte encodings), |
| * it is much more efficient even for random access because the code unit values |
| * for single-unit characters vs. lead units vs. trail units are completely disjoint. |
| * This means that it is easy to determine character (code point) boundaries from |
| * random offsets in the string. |
| * |
| * Unicode (UTF-16) string processing is optimized for the single-unit case. |
| * Although it is important to support supplementary characters |
| * (which use pairs of lead/trail code units called "surrogates"), |
| * their occurrence is rare. Almost all characters in modern use require only |
| * a single UChar code unit (i.e., their code point values are <=0xffff). |
| * |
| * For more details see the User Guide Strings chapter (http://icu-project.org/userguide/strings.html). |
| * For a discussion of the handling of unpaired surrogates see also |
| * Jitterbug 2145 and its icu mailing list proposal on 2002-sep-18. |
| */ |
| |
| /** |
| * \defgroup ustring_ustrlen String Length |
| * \ingroup ustring_strlen |
| */ |
| /*@{*/ |
| /** |
| * Determine the length of an array of UChar. |
| * |
| * @param s The array of UChars, NULL (U+0000) terminated. |
| * @return The number of UChars in <code>chars</code>, minus the terminator. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strlen(const UChar *s); |
| /*@}*/ |
| |
| /** |
| * Count Unicode code points in the length UChar code units of the string. |
| * A code point may occupy either one or two UChar code units. |
| * Counting code points involves reading all code units. |
| * |
| * This functions is basically the inverse of the U16_FWD_N() macro (see utf.h). |
| * |
| * @param s The input string. |
| * @param length The number of UChar code units to be checked, or -1 to count all |
| * code points before the first NUL (U+0000). |
| * @return The number of code points in the specified code units. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_countChar32(const UChar *s, int32_t length); |
| |
| /** |
| * Check if the string contains more Unicode code points than a certain number. |
| * This is more efficient than counting all code points in the entire string |
| * and comparing that number with a threshold. |
| * This function may not need to scan the string at all if the length is known |
| * (not -1 for NUL-termination) and falls within a certain range, and |
| * never needs to count more than 'number+1' code points. |
| * Logically equivalent to (u_countChar32(s, length)>number). |
| * A Unicode code point may occupy either one or two UChar code units. |
| * |
| * @param s The input string. |
| * @param length The length of the string, or -1 if it is NUL-terminated. |
| * @param number The number of code points in the string is compared against |
| * the 'number' parameter. |
| * @return Boolean value for whether the string contains more Unicode code points |
| * than 'number'. Same as (u_countChar32(s, length)>number). |
| * @stable ICU 2.4 |
| */ |
| U_STABLE UBool U_EXPORT2 |
| u_strHasMoreChar32Than(const UChar *s, int32_t length, int32_t number); |
| |
| /** |
| * Concatenate two ustrings. Appends a copy of <code>src</code>, |
| * including the null terminator, to <code>dst</code>. The initial copied |
| * character from <code>src</code> overwrites the null terminator in <code>dst</code>. |
| * |
| * @param dst The destination string. |
| * @param src The source string. |
| * @return A pointer to <code>dst</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strcat(UChar *dst, |
| const UChar *src); |
| |
| /** |
| * Concatenate two ustrings. |
| * Appends at most <code>n</code> characters from <code>src</code> to <code>dst</code>. |
| * Adds a terminating NUL. |
| * If src is too long, then only <code>n-1</code> characters will be copied |
| * before the terminating NUL. |
| * If <code>n<=0</code> then dst is not modified. |
| * |
| * @param dst The destination string. |
| * @param src The source string. |
| * @param n The maximum number of characters to append. |
| * @return A pointer to <code>dst</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strncat(UChar *dst, |
| const UChar *src, |
| int32_t n); |
| |
| /** |
| * Find the first occurrence of a substring in a string. |
| * The substring is found at code point boundaries. |
| * That means that if the substring begins with |
| * a trail surrogate or ends with a lead surrogate, |
| * then it is found only if these surrogates stand alone in the text. |
| * Otherwise, the substring edge units would be matched against |
| * halves of surrogate pairs. |
| * |
| * @param s The string to search (NUL-terminated). |
| * @param substring The substring to find (NUL-terminated). |
| * @return A pointer to the first occurrence of <code>substring</code> in <code>s</code>, |
| * or <code>s</code> itself if the <code>substring</code> is empty, |
| * or <code>NULL</code> if <code>substring</code> is not in <code>s</code>. |
| * @stable ICU 2.0 |
| * |
| * @see u_strrstr |
| * @see u_strFindFirst |
| * @see u_strFindLast |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strstr(const UChar *s, const UChar *substring); |
| |
| /** |
| * Find the first occurrence of a substring in a string. |
| * The substring is found at code point boundaries. |
| * That means that if the substring begins with |
| * a trail surrogate or ends with a lead surrogate, |
| * then it is found only if these surrogates stand alone in the text. |
| * Otherwise, the substring edge units would be matched against |
| * halves of surrogate pairs. |
| * |
| * @param s The string to search. |
| * @param length The length of s (number of UChars), or -1 if it is NUL-terminated. |
| * @param substring The substring to find (NUL-terminated). |
| * @param subLength The length of substring (number of UChars), or -1 if it is NUL-terminated. |
| * @return A pointer to the first occurrence of <code>substring</code> in <code>s</code>, |
| * or <code>s</code> itself if the <code>substring</code> is empty, |
| * or <code>NULL</code> if <code>substring</code> is not in <code>s</code>. |
| * @stable ICU 2.4 |
| * |
| * @see u_strstr |
| * @see u_strFindLast |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strFindFirst(const UChar *s, int32_t length, const UChar *substring, int32_t subLength); |
| |
| /** |
| * Find the first occurrence of a BMP code point in a string. |
| * A surrogate code point is found only if its match in the text is not |
| * part of a surrogate pair. |
| * A NUL character is found at the string terminator. |
| * |
| * @param s The string to search (NUL-terminated). |
| * @param c The BMP code point to find. |
| * @return A pointer to the first occurrence of <code>c</code> in <code>s</code> |
| * or <code>NULL</code> if <code>c</code> is not in <code>s</code>. |
| * @stable ICU 2.0 |
| * |
| * @see u_strchr32 |
| * @see u_memchr |
| * @see u_strstr |
| * @see u_strFindFirst |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strchr(const UChar *s, UChar c); |
| |
| /** |
| * Find the first occurrence of a code point in a string. |
| * A surrogate code point is found only if its match in the text is not |
| * part of a surrogate pair. |
| * A NUL character is found at the string terminator. |
| * |
| * @param s The string to search (NUL-terminated). |
| * @param c The code point to find. |
| * @return A pointer to the first occurrence of <code>c</code> in <code>s</code> |
| * or <code>NULL</code> if <code>c</code> is not in <code>s</code>. |
| * @stable ICU 2.0 |
| * |
| * @see u_strchr |
| * @see u_memchr32 |
| * @see u_strstr |
| * @see u_strFindFirst |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strchr32(const UChar *s, UChar32 c); |
| |
| /** |
| * Find the last occurrence of a substring in a string. |
| * The substring is found at code point boundaries. |
| * That means that if the substring begins with |
| * a trail surrogate or ends with a lead surrogate, |
| * then it is found only if these surrogates stand alone in the text. |
| * Otherwise, the substring edge units would be matched against |
| * halves of surrogate pairs. |
| * |
| * @param s The string to search (NUL-terminated). |
| * @param substring The substring to find (NUL-terminated). |
| * @return A pointer to the last occurrence of <code>substring</code> in <code>s</code>, |
| * or <code>s</code> itself if the <code>substring</code> is empty, |
| * or <code>NULL</code> if <code>substring</code> is not in <code>s</code>. |
| * @stable ICU 2.4 |
| * |
| * @see u_strstr |
| * @see u_strFindFirst |
| * @see u_strFindLast |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strrstr(const UChar *s, const UChar *substring); |
| |
| /** |
| * Find the last occurrence of a substring in a string. |
| * The substring is found at code point boundaries. |
| * That means that if the substring begins with |
| * a trail surrogate or ends with a lead surrogate, |
| * then it is found only if these surrogates stand alone in the text. |
| * Otherwise, the substring edge units would be matched against |
| * halves of surrogate pairs. |
| * |
| * @param s The string to search. |
| * @param length The length of s (number of UChars), or -1 if it is NUL-terminated. |
| * @param substring The substring to find (NUL-terminated). |
| * @param subLength The length of substring (number of UChars), or -1 if it is NUL-terminated. |
| * @return A pointer to the last occurrence of <code>substring</code> in <code>s</code>, |
| * or <code>s</code> itself if the <code>substring</code> is empty, |
| * or <code>NULL</code> if <code>substring</code> is not in <code>s</code>. |
| * @stable ICU 2.4 |
| * |
| * @see u_strstr |
| * @see u_strFindLast |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strFindLast(const UChar *s, int32_t length, const UChar *substring, int32_t subLength); |
| |
| /** |
| * Find the last occurrence of a BMP code point in a string. |
| * A surrogate code point is found only if its match in the text is not |
| * part of a surrogate pair. |
| * A NUL character is found at the string terminator. |
| * |
| * @param s The string to search (NUL-terminated). |
| * @param c The BMP code point to find. |
| * @return A pointer to the last occurrence of <code>c</code> in <code>s</code> |
| * or <code>NULL</code> if <code>c</code> is not in <code>s</code>. |
| * @stable ICU 2.4 |
| * |
| * @see u_strrchr32 |
| * @see u_memrchr |
| * @see u_strrstr |
| * @see u_strFindLast |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strrchr(const UChar *s, UChar c); |
| |
| /** |
| * Find the last occurrence of a code point in a string. |
| * A surrogate code point is found only if its match in the text is not |
| * part of a surrogate pair. |
| * A NUL character is found at the string terminator. |
| * |
| * @param s The string to search (NUL-terminated). |
| * @param c The code point to find. |
| * @return A pointer to the last occurrence of <code>c</code> in <code>s</code> |
| * or <code>NULL</code> if <code>c</code> is not in <code>s</code>. |
| * @stable ICU 2.4 |
| * |
| * @see u_strrchr |
| * @see u_memchr32 |
| * @see u_strrstr |
| * @see u_strFindLast |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strrchr32(const UChar *s, UChar32 c); |
| |
| /** |
| * Locates the first occurrence in the string <code>string</code> of any of the characters |
| * in the string <code>matchSet</code>. |
| * Works just like C's strpbrk but with Unicode. |
| * |
| * @param string The string in which to search, NUL-terminated. |
| * @param matchSet A NUL-terminated string defining a set of code points |
| * for which to search in the text string. |
| * @return A pointer to the character in <code>string</code> that matches one of the |
| * characters in <code>matchSet</code>, or NULL if no such character is found. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strpbrk(const UChar *string, const UChar *matchSet); |
| |
| /** |
| * Returns the number of consecutive characters in <code>string</code>, |
| * beginning with the first, that do not occur somewhere in <code>matchSet</code>. |
| * Works just like C's strcspn but with Unicode. |
| * |
| * @param string The string in which to search, NUL-terminated. |
| * @param matchSet A NUL-terminated string defining a set of code points |
| * for which to search in the text string. |
| * @return The number of initial characters in <code>string</code> that do not |
| * occur in <code>matchSet</code>. |
| * @see u_strspn |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strcspn(const UChar *string, const UChar *matchSet); |
| |
| /** |
| * Returns the number of consecutive characters in <code>string</code>, |
| * beginning with the first, that occur somewhere in <code>matchSet</code>. |
| * Works just like C's strspn but with Unicode. |
| * |
| * @param string The string in which to search, NUL-terminated. |
| * @param matchSet A NUL-terminated string defining a set of code points |
| * for which to search in the text string. |
| * @return The number of initial characters in <code>string</code> that do |
| * occur in <code>matchSet</code>. |
| * @see u_strcspn |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strspn(const UChar *string, const UChar *matchSet); |
| |
| /** |
| * The string tokenizer API allows an application to break a string into |
| * tokens. Unlike strtok(), the saveState (the current pointer within the |
| * original string) is maintained in saveState. In the first call, the |
| * argument src is a pointer to the string. In subsequent calls to |
| * return successive tokens of that string, src must be specified as |
| * NULL. The value saveState is set by this function to maintain the |
| * function's position within the string, and on each subsequent call |
| * you must give this argument the same variable. This function does |
| * handle surrogate pairs. This function is similar to the strtok_r() |
| * the POSIX Threads Extension (1003.1c-1995) version. |
| * |
| * @param src String containing token(s). This string will be modified. |
| * After the first call to u_strtok_r(), this argument must |
| * be NULL to get to the next token. |
| * @param delim Set of delimiter characters (Unicode code points). |
| * @param saveState The current pointer within the original string, |
| * which is set by this function. The saveState |
| * parameter should the address of a local variable of type |
| * UChar *. (i.e. defined "Uhar *myLocalSaveState" and use |
| * &myLocalSaveState for this parameter). |
| * @return A pointer to the next token found in src, or NULL |
| * when there are no more tokens. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strtok_r(UChar *src, |
| const UChar *delim, |
| UChar **saveState); |
| |
| /** |
| * Compare two Unicode strings for bitwise equality (code unit order). |
| * |
| * @param s1 A string to compare. |
| * @param s2 A string to compare. |
| * @return 0 if <code>s1</code> and <code>s2</code> are bitwise equal; a negative |
| * value if <code>s1</code> is bitwise less than <code>s2,</code>; a positive |
| * value if <code>s1</code> is bitwise greater than <code>s2</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strcmp(const UChar *s1, |
| const UChar *s2); |
| |
| /** |
| * Compare two Unicode strings in code point order. |
| * See u_strCompare for details. |
| * |
| * @param s1 A string to compare. |
| * @param s2 A string to compare. |
| * @return a negative/zero/positive integer corresponding to whether |
| * the first string is less than/equal to/greater than the second one |
| * in code point order |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strcmpCodePointOrder(const UChar *s1, const UChar *s2); |
| |
| /** |
| * Compare two Unicode strings (binary order). |
| * |
| * The comparison can be done in code unit order or in code point order. |
| * They differ only in UTF-16 when |
| * comparing supplementary code points (U+10000..U+10ffff) |
| * to BMP code points near the end of the BMP (i.e., U+e000..U+ffff). |
| * In code unit order, high BMP code points sort after supplementary code points |
| * because they are stored as pairs of surrogates which are at U+d800..U+dfff. |
| * |
| * This functions works with strings of different explicitly specified lengths |
| * unlike the ANSI C-like u_strcmp() and u_memcmp() etc. |
| * NUL-terminated strings are possible with length arguments of -1. |
| * |
| * @param s1 First source string. |
| * @param length1 Length of first source string, or -1 if NUL-terminated. |
| * |
| * @param s2 Second source string. |
| * @param length2 Length of second source string, or -1 if NUL-terminated. |
| * |
| * @param codePointOrder Choose between code unit order (FALSE) |
| * and code point order (TRUE). |
| * |
| * @return <0 or 0 or >0 as usual for string comparisons |
| * |
| * @stable ICU 2.2 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strCompare(const UChar *s1, int32_t length1, |
| const UChar *s2, int32_t length2, |
| UBool codePointOrder); |
| |
| /** |
| * Compare two Unicode strings (binary order) |
| * as presented by UCharIterator objects. |
| * Works otherwise just like u_strCompare(). |
| * |
| * Both iterators are reset to their start positions. |
| * When the function returns, it is undefined where the iterators |
| * have stopped. |
| * |
| * @param iter1 First source string iterator. |
| * @param iter2 Second source string iterator. |
| * @param codePointOrder Choose between code unit order (FALSE) |
| * and code point order (TRUE). |
| * |
| * @return <0 or 0 or >0 as usual for string comparisons |
| * |
| * @see u_strCompare |
| * |
| * @stable ICU 2.6 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strCompareIter(UCharIterator *iter1, UCharIterator *iter2, UBool codePointOrder); |
| |
| #ifndef U_COMPARE_CODE_POINT_ORDER |
| /* see also unistr.h and unorm.h */ |
| /** |
| * Option bit for u_strCaseCompare, u_strcasecmp, unorm_compare, etc: |
| * Compare strings in code point order instead of code unit order. |
| * @stable ICU 2.2 |
| */ |
| #define U_COMPARE_CODE_POINT_ORDER 0x8000 |
| #endif |
| |
| /** |
| * Compare two strings case-insensitively using full case folding. |
| * This is equivalent to |
| * u_strCompare(u_strFoldCase(s1, options), |
| * u_strFoldCase(s2, options), |
| * (options&U_COMPARE_CODE_POINT_ORDER)!=0). |
| * |
| * The comparison can be done in UTF-16 code unit order or in code point order. |
| * They differ only when comparing supplementary code points (U+10000..U+10ffff) |
| * to BMP code points near the end of the BMP (i.e., U+e000..U+ffff). |
| * In code unit order, high BMP code points sort after supplementary code points |
| * because they are stored as pairs of surrogates which are at U+d800..U+dfff. |
| * |
| * This functions works with strings of different explicitly specified lengths |
| * unlike the ANSI C-like u_strcmp() and u_memcmp() etc. |
| * NUL-terminated strings are possible with length arguments of -1. |
| * |
| * @param s1 First source string. |
| * @param length1 Length of first source string, or -1 if NUL-terminated. |
| * |
| * @param s2 Second source string. |
| * @param length2 Length of second source string, or -1 if NUL-terminated. |
| * |
| * @param options A bit set of options: |
| * - U_FOLD_CASE_DEFAULT or 0 is used for default options: |
| * Comparison in code unit order with default case folding. |
| * |
| * - U_COMPARE_CODE_POINT_ORDER |
| * Set to choose code point order instead of code unit order |
| * (see u_strCompare for details). |
| * |
| * - U_FOLD_CASE_EXCLUDE_SPECIAL_I |
| * |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * |
| * @return <0 or 0 or >0 as usual for string comparisons |
| * |
| * @stable ICU 2.2 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strCaseCompare(const UChar *s1, int32_t length1, |
| const UChar *s2, int32_t length2, |
| uint32_t options, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Compare two ustrings for bitwise equality. |
| * Compares at most <code>n</code> characters. |
| * |
| * @param ucs1 A string to compare. |
| * @param ucs2 A string to compare. |
| * @param n The maximum number of characters to compare. |
| * @return 0 if <code>s1</code> and <code>s2</code> are bitwise equal; a negative |
| * value if <code>s1</code> is bitwise less than <code>s2</code>; a positive |
| * value if <code>s1</code> is bitwise greater than <code>s2</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strncmp(const UChar *ucs1, |
| const UChar *ucs2, |
| int32_t n); |
| |
| /** |
| * Compare two Unicode strings in code point order. |
| * This is different in UTF-16 from u_strncmp() if supplementary characters are present. |
| * For details, see u_strCompare(). |
| * |
| * @param s1 A string to compare. |
| * @param s2 A string to compare. |
| * @param n The maximum number of characters to compare. |
| * @return a negative/zero/positive integer corresponding to whether |
| * the first string is less than/equal to/greater than the second one |
| * in code point order |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strncmpCodePointOrder(const UChar *s1, const UChar *s2, int32_t n); |
| |
| /** |
| * Compare two strings case-insensitively using full case folding. |
| * This is equivalent to u_strcmp(u_strFoldCase(s1, options), u_strFoldCase(s2, options)). |
| * |
| * @param s1 A string to compare. |
| * @param s2 A string to compare. |
| * @param options A bit set of options: |
| * - U_FOLD_CASE_DEFAULT or 0 is used for default options: |
| * Comparison in code unit order with default case folding. |
| * |
| * - U_COMPARE_CODE_POINT_ORDER |
| * Set to choose code point order instead of code unit order |
| * (see u_strCompare for details). |
| * |
| * - U_FOLD_CASE_EXCLUDE_SPECIAL_I |
| * |
| * @return A negative, zero, or positive integer indicating the comparison result. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strcasecmp(const UChar *s1, const UChar *s2, uint32_t options); |
| |
| /** |
| * Compare two strings case-insensitively using full case folding. |
| * This is equivalent to u_strcmp(u_strFoldCase(s1, at most n, options), |
| * u_strFoldCase(s2, at most n, options)). |
| * |
| * @param s1 A string to compare. |
| * @param s2 A string to compare. |
| * @param n The maximum number of characters each string to case-fold and then compare. |
| * @param options A bit set of options: |
| * - U_FOLD_CASE_DEFAULT or 0 is used for default options: |
| * Comparison in code unit order with default case folding. |
| * |
| * - U_COMPARE_CODE_POINT_ORDER |
| * Set to choose code point order instead of code unit order |
| * (see u_strCompare for details). |
| * |
| * - U_FOLD_CASE_EXCLUDE_SPECIAL_I |
| * |
| * @return A negative, zero, or positive integer indicating the comparison result. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strncasecmp(const UChar *s1, const UChar *s2, int32_t n, uint32_t options); |
| |
| /** |
| * Compare two strings case-insensitively using full case folding. |
| * This is equivalent to u_strcmp(u_strFoldCase(s1, n, options), |
| * u_strFoldCase(s2, n, options)). |
| * |
| * @param s1 A string to compare. |
| * @param s2 A string to compare. |
| * @param length The number of characters in each string to case-fold and then compare. |
| * @param options A bit set of options: |
| * - U_FOLD_CASE_DEFAULT or 0 is used for default options: |
| * Comparison in code unit order with default case folding. |
| * |
| * - U_COMPARE_CODE_POINT_ORDER |
| * Set to choose code point order instead of code unit order |
| * (see u_strCompare for details). |
| * |
| * - U_FOLD_CASE_EXCLUDE_SPECIAL_I |
| * |
| * @return A negative, zero, or positive integer indicating the comparison result. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_memcasecmp(const UChar *s1, const UChar *s2, int32_t length, uint32_t options); |
| |
| /** |
| * Copy a ustring. Adds a null terminator. |
| * |
| * @param dst The destination string. |
| * @param src The source string. |
| * @return A pointer to <code>dst</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strcpy(UChar *dst, |
| const UChar *src); |
| |
| /** |
| * Copy a ustring. |
| * Copies at most <code>n</code> characters. The result will be null terminated |
| * if the length of <code>src</code> is less than <code>n</code>. |
| * |
| * @param dst The destination string. |
| * @param src The source string. |
| * @param n The maximum number of characters to copy. |
| * @return A pointer to <code>dst</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strncpy(UChar *dst, |
| const UChar *src, |
| int32_t n); |
| |
| #if !UCONFIG_NO_CONVERSION |
| |
| /** |
| * Copy a byte string encoded in the default codepage to a ustring. |
| * Adds a null terminator. |
| * Performs a host byte to UChar conversion |
| * |
| * @param dst The destination string. |
| * @param src The source string. |
| * @return A pointer to <code>dst</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 u_uastrcpy(UChar *dst, |
| const char *src ); |
| |
| /** |
| * Copy a byte string encoded in the default codepage to a ustring. |
| * Copies at most <code>n</code> characters. The result will be null terminated |
| * if the length of <code>src</code> is less than <code>n</code>. |
| * Performs a host byte to UChar conversion |
| * |
| * @param dst The destination string. |
| * @param src The source string. |
| * @param n The maximum number of characters to copy. |
| * @return A pointer to <code>dst</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 u_uastrncpy(UChar *dst, |
| const char *src, |
| int32_t n); |
| |
| /** |
| * Copy ustring to a byte string encoded in the default codepage. |
| * Adds a null terminator. |
| * Performs a UChar to host byte conversion |
| * |
| * @param dst The destination string. |
| * @param src The source string. |
| * @return A pointer to <code>dst</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE char* U_EXPORT2 u_austrcpy(char *dst, |
| const UChar *src ); |
| |
| /** |
| * Copy ustring to a byte string encoded in the default codepage. |
| * Copies at most <code>n</code> characters. The result will be null terminated |
| * if the length of <code>src</code> is less than <code>n</code>. |
| * Performs a UChar to host byte conversion |
| * |
| * @param dst The destination string. |
| * @param src The source string. |
| * @param n The maximum number of characters to copy. |
| * @return A pointer to <code>dst</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE char* U_EXPORT2 u_austrncpy(char *dst, |
| const UChar *src, |
| int32_t n ); |
| |
| #endif |
| |
| /** |
| * Synonym for memcpy(), but with UChars only. |
| * @param dest The destination string |
| * @param src The source string |
| * @param count The number of characters to copy |
| * @return A pointer to <code>dest</code> |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_memcpy(UChar *dest, const UChar *src, int32_t count); |
| |
| /** |
| * Synonym for memmove(), but with UChars only. |
| * @param dest The destination string |
| * @param src The source string |
| * @param count The number of characters to move |
| * @return A pointer to <code>dest</code> |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_memmove(UChar *dest, const UChar *src, int32_t count); |
| |
| /** |
| * Initialize <code>count</code> characters of <code>dest</code> to <code>c</code>. |
| * |
| * @param dest The destination string. |
| * @param c The character to initialize the string. |
| * @param count The maximum number of characters to set. |
| * @return A pointer to <code>dest</code>. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_memset(UChar *dest, UChar c, int32_t count); |
| |
| /** |
| * Compare the first <code>count</code> UChars of each buffer. |
| * |
| * @param buf1 The first string to compare. |
| * @param buf2 The second string to compare. |
| * @param count The maximum number of UChars to compare. |
| * @return When buf1 < buf2, a negative number is returned. |
| * When buf1 == buf2, 0 is returned. |
| * When buf1 > buf2, a positive number is returned. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_memcmp(const UChar *buf1, const UChar *buf2, int32_t count); |
| |
| /** |
| * Compare two Unicode strings in code point order. |
| * This is different in UTF-16 from u_memcmp() if supplementary characters are present. |
| * For details, see u_strCompare(). |
| * |
| * @param s1 A string to compare. |
| * @param s2 A string to compare. |
| * @param count The maximum number of characters to compare. |
| * @return a negative/zero/positive integer corresponding to whether |
| * the first string is less than/equal to/greater than the second one |
| * in code point order |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_memcmpCodePointOrder(const UChar *s1, const UChar *s2, int32_t count); |
| |
| /** |
| * Find the first occurrence of a BMP code point in a string. |
| * A surrogate code point is found only if its match in the text is not |
| * part of a surrogate pair. |
| * A NUL character is found at the string terminator. |
| * |
| * @param s The string to search (contains <code>count</code> UChars). |
| * @param c The BMP code point to find. |
| * @param count The length of the string. |
| * @return A pointer to the first occurrence of <code>c</code> in <code>s</code> |
| * or <code>NULL</code> if <code>c</code> is not in <code>s</code>. |
| * @stable ICU 2.0 |
| * |
| * @see u_strchr |
| * @see u_memchr32 |
| * @see u_strFindFirst |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_memchr(const UChar *s, UChar c, int32_t count); |
| |
| /** |
| * Find the first occurrence of a code point in a string. |
| * A surrogate code point is found only if its match in the text is not |
| * part of a surrogate pair. |
| * A NUL character is found at the string terminator. |
| * |
| * @param s The string to search (contains <code>count</code> UChars). |
| * @param c The code point to find. |
| * @param count The length of the string. |
| * @return A pointer to the first occurrence of <code>c</code> in <code>s</code> |
| * or <code>NULL</code> if <code>c</code> is not in <code>s</code>. |
| * @stable ICU 2.0 |
| * |
| * @see u_strchr32 |
| * @see u_memchr |
| * @see u_strFindFirst |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_memchr32(const UChar *s, UChar32 c, int32_t count); |
| |
| /** |
| * Find the last occurrence of a BMP code point in a string. |
| * A surrogate code point is found only if its match in the text is not |
| * part of a surrogate pair. |
| * A NUL character is found at the string terminator. |
| * |
| * @param s The string to search (contains <code>count</code> UChars). |
| * @param c The BMP code point to find. |
| * @param count The length of the string. |
| * @return A pointer to the last occurrence of <code>c</code> in <code>s</code> |
| * or <code>NULL</code> if <code>c</code> is not in <code>s</code>. |
| * @stable ICU 2.4 |
| * |
| * @see u_strrchr |
| * @see u_memrchr32 |
| * @see u_strFindLast |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_memrchr(const UChar *s, UChar c, int32_t count); |
| |
| /** |
| * Find the last occurrence of a code point in a string. |
| * A surrogate code point is found only if its match in the text is not |
| * part of a surrogate pair. |
| * A NUL character is found at the string terminator. |
| * |
| * @param s The string to search (contains <code>count</code> UChars). |
| * @param c The code point to find. |
| * @param count The length of the string. |
| * @return A pointer to the last occurrence of <code>c</code> in <code>s</code> |
| * or <code>NULL</code> if <code>c</code> is not in <code>s</code>. |
| * @stable ICU 2.4 |
| * |
| * @see u_strrchr32 |
| * @see u_memrchr |
| * @see u_strFindLast |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_memrchr32(const UChar *s, UChar32 c, int32_t count); |
| |
| /** |
| * Unicode String literals in C. |
| * We need one macro to declare a variable for the string |
| * and to statically preinitialize it if possible, |
| * and a second macro to dynamically intialize such a string variable if necessary. |
| * |
| * The macros are defined for maximum performance. |
| * They work only for strings that contain "invariant characters", i.e., |
| * only latin letters, digits, and some punctuation. |
| * See utypes.h for details. |
| * |
| * A pair of macros for a single string must be used with the same |
| * parameters. |
| * The string parameter must be a C string literal. |
| * The length of the string, not including the terminating |
| * <code>NUL</code>, must be specified as a constant. |
| * The U_STRING_DECL macro should be invoked exactly once for one |
| * such string variable before it is used. |
| * |
| * Usage: |
| * <pre> |
| * U_STRING_DECL(ustringVar1, "Quick-Fox 2", 11); |
| * U_STRING_DECL(ustringVar2, "jumps 5%", 8); |
| * static UBool didInit=FALSE; |
| * |
| * int32_t function() { |
| * if(!didInit) { |
| * U_STRING_INIT(ustringVar1, "Quick-Fox 2", 11); |
| * U_STRING_INIT(ustringVar2, "jumps 5%", 8); |
| * didInit=TRUE; |
| * } |
| * return u_strcmp(ustringVar1, ustringVar2); |
| * } |
| * </pre> |
| * |
| * Note that the macros will NOT consistently work if their argument is another #define. |
| * The following will not work on all platforms, don't use it. |
| * |
| * <pre> |
| * #define GLUCK "Mr. Gluck" |
| * U_STRING_DECL(var, GLUCK, 9) |
| * U_STRING_INIT(var, GLUCK, 9) |
| * </pre> |
| * |
| * Instead, use the string literal "Mr. Gluck" as the argument to both macro |
| * calls. |
| * |
| * |
| * @stable ICU 2.0 |
| */ |
| #if defined(U_DECLARE_UTF16) |
| # define U_STRING_DECL(var, cs, length) static const UChar var[(length)+1]=U_DECLARE_UTF16(cs) |
| /**@stable ICU 2.0 */ |
| # define U_STRING_INIT(var, cs, length) |
| #elif U_SIZEOF_WCHAR_T==U_SIZEOF_UCHAR && (U_CHARSET_FAMILY==U_ASCII_FAMILY || (U_SIZEOF_UCHAR == 2 && defined(U_WCHAR_IS_UTF16))) |
| # define U_STRING_DECL(var, cs, length) static const UChar var[(length)+1]=L ## cs |
| /**@stable ICU 2.0 */ |
| # define U_STRING_INIT(var, cs, length) |
| #elif U_SIZEOF_UCHAR==1 && U_CHARSET_FAMILY==U_ASCII_FAMILY |
| # define U_STRING_DECL(var, cs, length) static const UChar var[(length)+1]={ (const UChar *)cs } |
| /**@stable ICU 2.0 */ |
| # define U_STRING_INIT(var, cs, length) |
| #else |
| # define U_STRING_DECL(var, cs, length) static UChar var[(length)+1] |
| /**@stable ICU 2.0 */ |
| # define U_STRING_INIT(var, cs, length) u_charsToUChars(cs, var, length+1) |
| #endif |
| |
| /** |
| * Unescape a string of characters and write the resulting |
| * Unicode characters to the destination buffer. The following escape |
| * sequences are recognized: |
| * |
| * \\uhhhh 4 hex digits; h in [0-9A-Fa-f] |
| * \\Uhhhhhhhh 8 hex digits |
| * \\xhh 1-2 hex digits |
| * \\x{h...} 1-8 hex digits |
| * \\ooo 1-3 octal digits; o in [0-7] |
| * \\cX control-X; X is masked with 0x1F |
| * |
| * as well as the standard ANSI C escapes: |
| * |
| * \\a => U+0007, \\b => U+0008, \\t => U+0009, \\n => U+000A, |
| * \\v => U+000B, \\f => U+000C, \\r => U+000D, \\e => U+001B, |
| * \\" => U+0022, \\' => U+0027, \\? => U+003F, \\\\ => U+005C |
| * |
| * Anything else following a backslash is generically escaped. For |
| * example, "[a\\-z]" returns "[a-z]". |
| * |
| * If an escape sequence is ill-formed, this method returns an empty |
| * string. An example of an ill-formed sequence is "\\u" followed by |
| * fewer than 4 hex digits. |
| * |
| * The above characters are recognized in the compiler's codepage, |
| * that is, they are coded as 'u', '\\', etc. Characters that are |
| * not parts of escape sequences are converted using u_charsToUChars(). |
| * |
| * This function is similar to UnicodeString::unescape() but not |
| * identical to it. The latter takes a source UnicodeString, so it |
| * does escape recognition but no conversion. |
| * |
| * @param src a zero-terminated string of invariant characters |
| * @param dest pointer to buffer to receive converted and unescaped |
| * text and, if there is room, a zero terminator. May be NULL for |
| * preflighting, in which case no UChars will be written, but the |
| * return value will still be valid. On error, an empty string is |
| * stored here (if possible). |
| * @param destCapacity the number of UChars that may be written at |
| * dest. Ignored if dest == NULL. |
| * @return the length of unescaped string. |
| * @see u_unescapeAt |
| * @see UnicodeString#unescape() |
| * @see UnicodeString#unescapeAt() |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_unescape(const char *src, |
| UChar *dest, int32_t destCapacity); |
| |
| U_CDECL_BEGIN |
| /** |
| * Callback function for u_unescapeAt() that returns a character of |
| * the source text given an offset and a context pointer. The context |
| * pointer will be whatever is passed into u_unescapeAt(). |
| * |
| * @param offset pointer to the offset that will be passed to u_unescapeAt(). |
| * @param context an opaque pointer passed directly into u_unescapeAt() |
| * @return the character represented by the escape sequence at |
| * offset |
| * @see u_unescapeAt |
| * @stable ICU 2.0 |
| */ |
| typedef UChar (U_CALLCONV *UNESCAPE_CHAR_AT)(int32_t offset, void *context); |
| U_CDECL_END |
| |
| /** |
| * Unescape a single sequence. The character at offset-1 is assumed |
| * (without checking) to be a backslash. This method takes a callback |
| * pointer to a function that returns the UChar at a given offset. By |
| * varying this callback, ICU functions are able to unescape char* |
| * strings, UnicodeString objects, and UFILE pointers. |
| * |
| * If offset is out of range, or if the escape sequence is ill-formed, |
| * (UChar32)0xFFFFFFFF is returned. See documentation of u_unescape() |
| * for a list of recognized sequences. |
| * |
| * @param charAt callback function that returns a UChar of the source |
| * text given an offset and a context pointer. |
| * @param offset pointer to the offset that will be passed to charAt. |
| * The offset value will be updated upon return to point after the |
| * last parsed character of the escape sequence. On error the offset |
| * is unchanged. |
| * @param length the number of characters in the source text. The |
| * last character of the source text is considered to be at offset |
| * length-1. |
| * @param context an opaque pointer passed directly into charAt. |
| * @return the character represented by the escape sequence at |
| * offset, or (UChar32)0xFFFFFFFF on error. |
| * @see u_unescape() |
| * @see UnicodeString#unescape() |
| * @see UnicodeString#unescapeAt() |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar32 U_EXPORT2 |
| u_unescapeAt(UNESCAPE_CHAR_AT charAt, |
| int32_t *offset, |
| int32_t length, |
| void *context); |
| |
| /** |
| * Uppercase the characters in a string. |
| * Casing is locale-dependent and context-sensitive. |
| * The result may be longer or shorter than the original. |
| * The source string and the destination buffer are allowed to overlap. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the result |
| * without writing any of the result string. |
| * @param src The original string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param locale The locale to consider, or "" for the root locale or NULL for the default locale. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The length of the result string. It may be greater than destCapacity. In that case, |
| * only some of the result was written to the destination buffer. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strToUpper(UChar *dest, int32_t destCapacity, |
| const UChar *src, int32_t srcLength, |
| const char *locale, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Lowercase the characters in a string. |
| * Casing is locale-dependent and context-sensitive. |
| * The result may be longer or shorter than the original. |
| * The source string and the destination buffer are allowed to overlap. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the result |
| * without writing any of the result string. |
| * @param src The original string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param locale The locale to consider, or "" for the root locale or NULL for the default locale. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The length of the result string. It may be greater than destCapacity. In that case, |
| * only some of the result was written to the destination buffer. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strToLower(UChar *dest, int32_t destCapacity, |
| const UChar *src, int32_t srcLength, |
| const char *locale, |
| UErrorCode *pErrorCode); |
| |
| #if !UCONFIG_NO_BREAK_ITERATION |
| |
| /** |
| * Titlecase a string. |
| * Casing is locale-dependent and context-sensitive. |
| * Titlecasing uses a break iterator to find the first characters of words |
| * that are to be titlecased. It titlecases those characters and lowercases |
| * all others. |
| * |
| * The titlecase break iterator can be provided to customize for arbitrary |
| * styles, using rules and dictionaries beyond the standard iterators. |
| * It may be more efficient to always provide an iterator to avoid |
| * opening and closing one for each string. |
| * The standard titlecase iterator for the root locale implements the |
| * algorithm of Unicode TR 21. |
| * |
| * This function uses only the setText(), first() and next() methods of the |
| * provided break iterator. |
| * |
| * The result may be longer or shorter than the original. |
| * The source string and the destination buffer are allowed to overlap. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the result |
| * without writing any of the result string. |
| * @param src The original string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param titleIter A break iterator to find the first characters of words |
| * that are to be titlecased. |
| * If none is provided (NULL), then a standard titlecase |
| * break iterator is opened. |
| * @param locale The locale to consider, or "" for the root locale or NULL for the default locale. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The length of the result string. It may be greater than destCapacity. In that case, |
| * only some of the result was written to the destination buffer. |
| * @stable ICU 2.1 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strToTitle(UChar *dest, int32_t destCapacity, |
| const UChar *src, int32_t srcLength, |
| UBreakIterator *titleIter, |
| const char *locale, |
| UErrorCode *pErrorCode); |
| |
| #endif |
| |
| /** |
| * Case-fold the characters in a string. |
| * Case-folding is locale-independent and not context-sensitive, |
| * but there is an option for whether to include or exclude mappings for dotted I |
| * and dotless i that are marked with 'I' in CaseFolding.txt. |
| * The result may be longer or shorter than the original. |
| * The source string and the destination buffer are allowed to overlap. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the result |
| * without writing any of the result string. |
| * @param src The original string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param options Either U_FOLD_CASE_DEFAULT or U_FOLD_CASE_EXCLUDE_SPECIAL_I |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The length of the result string. It may be greater than destCapacity. In that case, |
| * only some of the result was written to the destination buffer. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE int32_t U_EXPORT2 |
| u_strFoldCase(UChar *dest, int32_t destCapacity, |
| const UChar *src, int32_t srcLength, |
| uint32_t options, |
| UErrorCode *pErrorCode); |
| |
| #if defined(U_WCHAR_IS_UTF16) || defined(U_WCHAR_IS_UTF32) || !UCONFIG_NO_CONVERSION |
| /** |
| * Convert a UTF-16 string to a wchar_t string. |
| * If it is known at compile time that wchar_t strings are in UTF-16 or UTF-32, then |
| * this function simply calls the fast, dedicated function for that. |
| * Otherwise, two conversions UTF-16 -> default charset -> wchar_t* are performed. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of wchar_t's). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The pointer to destination buffer. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE wchar_t* U_EXPORT2 |
| u_strToWCS(wchar_t *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const UChar *src, |
| int32_t srcLength, |
| UErrorCode *pErrorCode); |
| /** |
| * Convert a wchar_t string to UTF-16. |
| * If it is known at compile time that wchar_t strings are in UTF-16 or UTF-32, then |
| * this function simply calls the fast, dedicated function for that. |
| * Otherwise, two conversions wchar_t* -> default charset -> UTF-16 are performed. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The pointer to destination buffer. |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strFromWCS(UChar *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const wchar_t *src, |
| int32_t srcLength, |
| UErrorCode *pErrorCode); |
| #endif /* defined(U_WCHAR_IS_UTF16) || defined(U_WCHAR_IS_UTF32) || !UCONFIG_NO_CONVERSION */ |
| |
| /** |
| * Convert a UTF-16 string to UTF-8. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of chars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The pointer to destination buffer. |
| * @stable ICU 2.0 |
| * @see u_strToUTF8WithSub |
| * @see u_strFromUTF8 |
| */ |
| U_STABLE char* U_EXPORT2 |
| u_strToUTF8(char *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const UChar *src, |
| int32_t srcLength, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a UTF-8 string to UTF-16. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The pointer to destination buffer. |
| * @stable ICU 2.0 |
| * @see u_strFromUTF8WithSub |
| * @see u_strFromUTF8Lenient |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strFromUTF8(UChar *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const char *src, |
| int32_t srcLength, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a UTF-16 string to UTF-8. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * Same as u_strToUTF8() except for the additional subchar which is output for |
| * illegal input sequences, instead of stopping with the U_INVALID_CHAR_FOUND error code. |
| * With subchar==U_SENTINEL, this function behaves exactly like u_strToUTF8(). |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of chars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param subchar The substitution character to use in place of an illegal input sequence, |
| * or U_SENTINEL if the function is to return with U_INVALID_CHAR_FOUND instead. |
| * A substitution character can be any valid Unicode code point (up to U+10FFFF) |
| * except for surrogate code points (U+D800..U+DFFF). |
| * The recommended value is U+FFFD "REPLACEMENT CHARACTER". |
| * @param pNumSubstitutions Output parameter receiving the number of substitutions if subchar>=0. |
| * Set to 0 if no substitutions occur or subchar<0. |
| * pNumSubstitutions can be NULL. |
| * @param pErrorCode Pointer to a standard ICU error code. Its input value must |
| * pass the U_SUCCESS() test, or else the function returns |
| * immediately. Check for U_FAILURE() on output or use with |
| * function chaining. (See User Guide for details.) |
| * @return The pointer to destination buffer. |
| * @see u_strToUTF8 |
| * @see u_strFromUTF8WithSub |
| * @stable ICU 3.6 |
| */ |
| U_STABLE char* U_EXPORT2 |
| u_strToUTF8WithSub(char *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const UChar *src, |
| int32_t srcLength, |
| UChar32 subchar, int32_t *pNumSubstitutions, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a UTF-8 string to UTF-16. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * Same as u_strFromUTF8() except for the additional subchar which is output for |
| * illegal input sequences, instead of stopping with the U_INVALID_CHAR_FOUND error code. |
| * With subchar==U_SENTINEL, this function behaves exactly like u_strFromUTF8(). |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param subchar The substitution character to use in place of an illegal input sequence, |
| * or U_SENTINEL if the function is to return with U_INVALID_CHAR_FOUND instead. |
| * A substitution character can be any valid Unicode code point (up to U+10FFFF) |
| * except for surrogate code points (U+D800..U+DFFF). |
| * The recommended value is U+FFFD "REPLACEMENT CHARACTER". |
| * @param pNumSubstitutions Output parameter receiving the number of substitutions if subchar>=0. |
| * Set to 0 if no substitutions occur or subchar<0. |
| * pNumSubstitutions can be NULL. |
| * @param pErrorCode Pointer to a standard ICU error code. Its input value must |
| * pass the U_SUCCESS() test, or else the function returns |
| * immediately. Check for U_FAILURE() on output or use with |
| * function chaining. (See User Guide for details.) |
| * @return The pointer to destination buffer. |
| * @see u_strFromUTF8 |
| * @see u_strFromUTF8Lenient |
| * @see u_strToUTF8WithSub |
| * @stable ICU 3.6 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strFromUTF8WithSub(UChar *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const char *src, |
| int32_t srcLength, |
| UChar32 subchar, int32_t *pNumSubstitutions, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a UTF-8 string to UTF-16. |
| * |
| * Same as u_strFromUTF8() except that this function is designed to be very fast, |
| * which it achieves by being lenient about malformed UTF-8 sequences. |
| * This function is intended for use in environments where UTF-8 text is |
| * expected to be well-formed. |
| * |
| * Its semantics are: |
| * - Well-formed UTF-8 text is correctly converted to well-formed UTF-16 text. |
| * - The function will not read beyond the input string, nor write beyond |
| * the destCapacity. |
| * - Malformed UTF-8 results in "garbage" 16-bit Unicode strings which may not |
| * be well-formed UTF-16. |
| * The function will resynchronize to valid code point boundaries |
| * within a small number of code points after an illegal sequence. |
| * - Non-shortest forms are not detected and will result in "spoofing" output. |
| * |
| * For further performance improvement, if srcLength is given (>=0), |
| * then it must be destCapacity>=srcLength. |
| * |
| * There is no inverse u_strToUTF8Lenient() function because there is practically |
| * no performance gain from not checking that a UTF-16 string is well-formed. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * Unlike for other ICU functions, if srcLength>=0 then it |
| * must be destCapacity>=srcLength. |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * Unlike for other ICU functions, if srcLength>=0 but |
| * destCapacity<srcLength, then *pDestLength will be set to srcLength |
| * (and U_BUFFER_OVERFLOW_ERROR will be set) |
| * regardless of the actual result length. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param pErrorCode Pointer to a standard ICU error code. Its input value must |
| * pass the U_SUCCESS() test, or else the function returns |
| * immediately. Check for U_FAILURE() on output or use with |
| * function chaining. (See User Guide for details.) |
| * @return The pointer to destination buffer. |
| * @see u_strFromUTF8 |
| * @see u_strFromUTF8WithSub |
| * @see u_strToUTF8WithSub |
| * @stable ICU 3.6 |
| */ |
| U_STABLE UChar * U_EXPORT2 |
| u_strFromUTF8Lenient(UChar *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const char *src, |
| int32_t srcLength, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a UTF-16 string to UTF-32. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChar32s). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The pointer to destination buffer. |
| * @see u_strToUTF32WithSub |
| * @see u_strFromUTF32 |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar32* U_EXPORT2 |
| u_strToUTF32(UChar32 *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const UChar *src, |
| int32_t srcLength, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a UTF-32 string to UTF-16. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param pErrorCode Must be a valid pointer to an error code value, |
| * which must not indicate a failure before the function call. |
| * @return The pointer to destination buffer. |
| * @see u_strFromUTF32WithSub |
| * @see u_strToUTF32 |
| * @stable ICU 2.0 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strFromUTF32(UChar *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const UChar32 *src, |
| int32_t srcLength, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a UTF-16 string to UTF-32. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * Same as u_strToUTF32() except for the additional subchar which is output for |
| * illegal input sequences, instead of stopping with the U_INVALID_CHAR_FOUND error code. |
| * With subchar==U_SENTINEL, this function behaves exactly like u_strToUTF32(). |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChar32s). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param subchar The substitution character to use in place of an illegal input sequence, |
| * or U_SENTINEL if the function is to return with U_INVALID_CHAR_FOUND instead. |
| * A substitution character can be any valid Unicode code point (up to U+10FFFF) |
| * except for surrogate code points (U+D800..U+DFFF). |
| * The recommended value is U+FFFD "REPLACEMENT CHARACTER". |
| * @param pNumSubstitutions Output parameter receiving the number of substitutions if subchar>=0. |
| * Set to 0 if no substitutions occur or subchar<0. |
| * pNumSubstitutions can be NULL. |
| * @param pErrorCode Pointer to a standard ICU error code. Its input value must |
| * pass the U_SUCCESS() test, or else the function returns |
| * immediately. Check for U_FAILURE() on output or use with |
| * function chaining. (See User Guide for details.) |
| * @return The pointer to destination buffer. |
| * @see u_strToUTF32 |
| * @see u_strFromUTF32WithSub |
| * @stable ICU 4.2 |
| */ |
| U_STABLE UChar32* U_EXPORT2 |
| u_strToUTF32WithSub(UChar32 *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const UChar *src, |
| int32_t srcLength, |
| UChar32 subchar, int32_t *pNumSubstitutions, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a UTF-32 string to UTF-16. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * Same as u_strFromUTF32() except for the additional subchar which is output for |
| * illegal input sequences, instead of stopping with the U_INVALID_CHAR_FOUND error code. |
| * With subchar==U_SENTINEL, this function behaves exactly like u_strFromUTF32(). |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param subchar The substitution character to use in place of an illegal input sequence, |
| * or U_SENTINEL if the function is to return with U_INVALID_CHAR_FOUND instead. |
| * A substitution character can be any valid Unicode code point (up to U+10FFFF) |
| * except for surrogate code points (U+D800..U+DFFF). |
| * The recommended value is U+FFFD "REPLACEMENT CHARACTER". |
| * @param pNumSubstitutions Output parameter receiving the number of substitutions if subchar>=0. |
| * Set to 0 if no substitutions occur or subchar<0. |
| * pNumSubstitutions can be NULL. |
| * @param pErrorCode Pointer to a standard ICU error code. Its input value must |
| * pass the U_SUCCESS() test, or else the function returns |
| * immediately. Check for U_FAILURE() on output or use with |
| * function chaining. (See User Guide for details.) |
| * @return The pointer to destination buffer. |
| * @see u_strFromUTF32 |
| * @see u_strToUTF32WithSub |
| * @stable ICU 4.2 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strFromUTF32WithSub(UChar *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const UChar32 *src, |
| int32_t srcLength, |
| UChar32 subchar, int32_t *pNumSubstitutions, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a 16-bit Unicode string to Java Modified UTF-8. |
| * See http://java.sun.com/javase/6/docs/api/java/io/DataInput.html#modified-utf-8 |
| * |
| * This function behaves according to the documentation for Java DataOutput.writeUTF() |
| * except that it does not encode the output length in the destination buffer |
| * and does not have an output length restriction. |
| * See http://java.sun.com/javase/6/docs/api/java/io/DataOutput.html#writeUTF(java.lang.String) |
| * |
| * The input string need not be well-formed UTF-16. |
| * (Therefore there is no subchar parameter.) |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of chars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param pErrorCode Pointer to a standard ICU error code. Its input value must |
| * pass the U_SUCCESS() test, or else the function returns |
| * immediately. Check for U_FAILURE() on output or use with |
| * function chaining. (See User Guide for details.) |
| * @return The pointer to destination buffer. |
| * @stable ICU 4.4 |
| * @see u_strToUTF8WithSub |
| * @see u_strFromJavaModifiedUTF8WithSub |
| */ |
| U_STABLE char* U_EXPORT2 |
| u_strToJavaModifiedUTF8( |
| char *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const UChar *src, |
| int32_t srcLength, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * Convert a Java Modified UTF-8 string to a 16-bit Unicode string. |
| * If the input string is not well-formed, then the U_INVALID_CHAR_FOUND error code is set. |
| * |
| * This function behaves according to the documentation for Java DataInput.readUTF() |
| * except that it takes a length parameter rather than |
| * interpreting the first two input bytes as the length. |
| * See http://java.sun.com/javase/6/docs/api/java/io/DataInput.html#readUTF() |
| * |
| * The output string may not be well-formed UTF-16. |
| * |
| * @param dest A buffer for the result string. The result will be zero-terminated if |
| * the buffer is large enough. |
| * @param destCapacity The size of the buffer (number of UChars). If it is 0, then |
| * dest may be NULL and the function will only return the length of the |
| * result without writing any of the result string (pre-flighting). |
| * @param pDestLength A pointer to receive the number of units written to the destination. If |
| * pDestLength!=NULL then *pDestLength is always set to the |
| * number of output units corresponding to the transformation of |
| * all the input units, even in case of a buffer overflow. |
| * @param src The original source string |
| * @param srcLength The length of the original string. If -1, then src must be zero-terminated. |
| * @param subchar The substitution character to use in place of an illegal input sequence, |
| * or U_SENTINEL if the function is to return with U_INVALID_CHAR_FOUND instead. |
| * A substitution character can be any valid Unicode code point (up to U+10FFFF) |
| * except for surrogate code points (U+D800..U+DFFF). |
| * The recommended value is U+FFFD "REPLACEMENT CHARACTER". |
| * @param pNumSubstitutions Output parameter receiving the number of substitutions if subchar>=0. |
| * Set to 0 if no substitutions occur or subchar<0. |
| * pNumSubstitutions can be NULL. |
| * @param pErrorCode Pointer to a standard ICU error code. Its input value must |
| * pass the U_SUCCESS() test, or else the function returns |
| * immediately. Check for U_FAILURE() on output or use with |
| * function chaining. (See User Guide for details.) |
| * @return The pointer to destination buffer. |
| * @see u_strFromUTF8WithSub |
| * @see u_strFromUTF8Lenient |
| * @see u_strToJavaModifiedUTF8 |
| * @stable ICU 4.4 |
| */ |
| U_STABLE UChar* U_EXPORT2 |
| u_strFromJavaModifiedUTF8WithSub( |
| UChar *dest, |
| int32_t destCapacity, |
| int32_t *pDestLength, |
| const char *src, |
| int32_t srcLength, |
| UChar32 subchar, int32_t *pNumSubstitutions, |
| UErrorCode *pErrorCode); |
| |
| #endif |