This document records all changes made to the Starboard interface. This file will be updated each time a new Starboard version is released. Each section in this file describes the changes made to the Starboard interface since the version previous to it.
NOTE: Starboard versions 9 and below are no longer supported.
The memory management APIs SbMemoryAllocate, SbMemoryReallocate, SbMemoryCalloc, SbMemoryAllocateAligned, SbMemoryDeallocate, SbMemoryDeallocateAligned SbStringDuplicate are deprecated and the standard APIs malloc, realloc, calloc, posix_memalign, free from <stdlib.h> and strdup from <string.h> should be used instead.
The SbMediaGetBufferAlignmentAPI was deprecated.
The SbStorageOpenRecord and SbStorageDeleteRecord APIs defined in starboard/storage.h no longer have a parameter for SbUser as the APIs are user-agnostic.
The APIs defined in starboard/user.h are no longer used and have been deprecated.
The APIs defined in starboard/byte_swap.h are no longer used and have been deprecated.
The APIs defined in starboard/image.h are no longer used and have been deprecated.
kIamfConfigObus to SbPlayerSampleSideDataType in starboard/player.hThis value allows IAMF samples to be written to Starboard along with IAMF Config OBUs as side data.
SbMemoryReporter defined in starboard/memory_reporter.h`` is no longer used and is considered deprecated. It will be removed in upcoming Starboard versions. The corresponding SbMemoryAllocateNoReportandSbMemoryDeallocateNoReport` are also deprecated.
Renamed SbPlayerInfo2 to SbPlayerInfo, SbPlayerSeek2() to SbPlayerSeek(),and SbPlayerGetInfo2() to SbPlayerGetInfo(), as the version suffixes are no longer necessary.
Previously named Cobalt extensions are now found under starboard/extensions. The mechanism extends platform-specific functionality of Starboard via runtime resolution, and hence more properly belongs in Starboard codebase. This also helps break the dependency cycle between Starboard and Cobalt for cleaner component layering. For existing uses in Starboard ports, fallback forwarding headers are provided in the previous location of the code in cobalt/extensions.
Moved attributes of SbMediaAudioSampleInfo and SbMedidaVideoSampleInfo that specific to the stream (i.e. don't change per access unit) to SbMediaAudioStreamInfo and SbMediaVideoStreamInfo.
This allows to discard specific durations from the front and the back of any audio access units to improve the accuracy of audio playback. For example, in an AAC stream where each access unit contains 1024 frames, this allows to discard the last 300 frames of the 1024 frames when the duration of the stream isn't aligned to 1024 frames.
To better reflect the fact that it may write multiple samples in one call.
This makes it possible to support IAMF in the future.
This configuration is set for modular builds, which have:
starboard/atomic.hstarboard/atomic.h previously included C++ wrapper code for atomic operations. This code has been separated out and refactored into starboard/common/atomic.h to break dependency cycle between Starboard interface and Starboard Common C++ library.
SbPlayerGetAudioConfiguration() to allow the app to query active audio output devices used by the SbPlayer. SbMediaSetAudioWriteDuration() is deprecated as a result. Note that the app used to set audio write duration to 10 seconds at playback startup or seek to accommodate wireless devices, now the app sets the audio write duration to 0.5 seconds at all time for wired devices.kSbMediaAudioConnectorNone to kSbMediaAudioConnectorUnknown, as the implementation should only use this value when the audio output is available but its type cannot be determined.SbMediaAudioConfiguration::index.This API is unused by Cobalt and has been deprecated.
By supporting the keycode for the remote record button on Cobalt, the webapp can be programmed to respond to the remote record button in the future.
This enumeration of device types SbSystemDeviceType has been deprecated. We added new system property kSbSystemPropertyDeviceType for device type as a string. All the allowed device type values are now checked by nplb test: starboard/nplb/system_get_property_test.cc.
This constant is no longer used and has been deprecated.
The unused macro for SB_HAS_BILINEAR_FILTERING_SUPPORT feature has been removed.
This makes it possible to support these codecs in the future.
Adds properties for retrieving IFA identifier and related ad tracking limiting.
This adds a video projector type to Starboard devices.
This duplicated SystemPathDebugOutputDirectory without a useful distinction.
A decoder target format consisting of 10bit Y, U, and V planes.
The improvements on player creation and output mode query (like SbPlayerCreationParam and SbPlayerGetPreferredOutputMode()) are always enabled. This change also deprecates SbPlayerOutputModeSupported().
The extra parameters (like profile and level) on SbMediaIsVideoSupported() are always enabled. This change also deprecated SbMediaIsTransferCharacteristicsSupported().
kSbMediaMatrixIdUnknown has been deprecated. kSbMediaMatrixIdInvalid was added.
SbMediaType type parameter to some SbMedia buffer functions.SbMediaGetBufferAlignment() and SbMediaGetBufferPadding() no longer accept SbMediaType type as parameters. The implementation has to return the same values for both audio and video streams.
starboard::QueueApplication::DispatchAndDelete privateSince starboard::shared::starboard::QueueApplication has an event queue, QueueApplication::Inject should be used if an event just needs to be added to the queue or QueueApplication::InjectAndProcess if the event needs to be handled before returning. QueueApplication::DispatchAndDelete jumps the event queue and could lead to bugs due to the event (especially lifecycle events) being handled out of order.
This constant defines maximum space in bytes the cache directory kSbSystemPathCacheDirectory can use. The default value is 24MiB. Platforms can set kSbMaxSystemPathCacheDirectorySize to a larger value in “starboard/<PLATFORM_PATH>/configuration_constants.cc”.
Add SbMediaCanPlayMimeAndKeySystem.ValidatePerformance to enforce the performance of SbMediaCanPlayMimeAndKeySystem(). On platforms that fail such tests, MimeSupportabilityCache and KeySystemSupportabilityCache can be enabled to improve the performance. The caches store the results of previous queries and reuse them for repeated queries. Note that if caches are enabled, the platform need to clear the caches if there's any codec or audio/video output capability change.
Most platforms should only need to replace ‘Pause’ with ‘Blur’, ‘Unpause’ with ‘Focus’, ‘Suspend’ with ‘Freeze’, and ‘Resume’ with ‘Reveal’.
Since there is no longer a special Preloading state, applications should no longer use the Start event when a preloaded application is brought to the foreground. Instead, the same event(s) used for backgrounded applications (Concealed or Frozen) should be used.
See cobalt/doc/lifecycle.md for more details.
Added kSbEventTypeOsNetworkDisconnected and kSbEventTypeOsNetworkConnected so the platform can provide hints to the application of network connectivity changes.
Added function SbSystemNetworkIsDisconnected() to allow the application to query the network connectivity status.
If the platform detects a change in the date/time configuration (e.g. timezone change), then it should send the new kSbEventDateTimeConfigurationChanged event.
The starboard/speech_recognizer.h APIs have been deprecated -- even for platforms that define SB_HAS(SPEECH_RECOGNIZER). Instead, the application is expected to use the starboard/microphone.h APIs.
Added functions to direct the platform's UI engine to maintain focus on an item for a specific time before allowing focus to change. Also added a function to perform a batch of UI updates so that UI changes are atomic.
Functionality for a few existing APIs were clarified without changing the API itself.
Changed kSbEventTypeAccessiblityTextToSpeechSettingsChanged to kSbEventTypeAccessibilityTextToSpeechSettingsChanged.
Changed kSbEventTypeAccessiblitySettingsChanged to kSbEventTypeAccessibilitySettingsChanged.
The following macros have been removed:
SB_TRUESB_FALSESB_OVERRIDESB_DISALLOW_COPY_AND_ASSIGNThe following starboard functions have been removed:
SbCharacterIsAlphanumericSbCharacterIsDigitSbCharacterIsHexDigitSbCharacterIsSpaceSbCharacterIsUpperSbCharacterToLowerSbCharacterToUpperSbStringConcatSbStringConcatUnsafeSbStringConcatWideSbDoubleAbsoluteSbDoubleExponentSbDoubleFloorSbDoubleIsFiniteSbDoubleIsNanSbMemoryAlignToPageSizeSbMemoryCompareSbMemoryCopySbMemoryFindByteSbMemoryIsAlignedSbMemoryIsZeroSbMemoryMoveSbMemorySetSbStringCompareSbStringCompareAllSbStringCompareWideSbStringCopySbStringCopyUnsafeSbStringCopyWideSbStringFindCharacterSbStringFindLastCharacterSbStringFindStringSbStringGetLengthSbStringGetLengthWideSbStringParseDoubleSbStringParseSignedIntegerSbStringParseUInt64SbStringParseUnsignedIntegerSbSystemBinarySearchSbSystemSortThe new timestamp field from SbEvent will be used instead of the deprecated timestamp in SbInputData.
SbMediaIsSupported() from media.h to media_support_internal.h.It has never been used by Cobalt. It is only used inside Starboard by functions like CanPlayMimeAndKeySystem(), and is no longer exposed as a Starboard interface function.
The system can be disabled by implementing the function SbUiNavGetInterface() to return false. Platform-based UI navigation allows the platform to receive feedback on where UI elements are located and also lets the platform control what is selected and what the scroll parameters are.
NOTE: This API is not used in the production web app yet, so please use the stub implementation for SbUiNavGetInterface() for now.
The system must implement SbGetGlesInterface() in starboard/gles.h or use the provided stub implementation.
This change also effectively deprecates the gyp variable “enable_map_to_mesh” in favor of CobaltGraphicsExtensionApi function IsMapToMeshEnabled() and the command line switch --disable_map_to_mesh. Now, Cobalt will assume the platform supports map_to_mesh, so platforms that do not will have to have return |false| from IsMapToMeshEnabled() or use the provided command line switch.
The system must implement the captions functions in starboard/accessibility.h or use the provided stub implementations. System caption can be disabled by implementing the function SbAccessibilityGetCaptionSettings(SbAccessibilityCaptionSettings* caption_settings) to return false as the stub implementation does. This change also deprecates the SB_HAS_CAPTIONS flag.
Cobalt must be able to determine at runtime if the system supports IPv6. IPv6 can be disabled by defining SB_HAS_IPV6 to 0.
The system must implement the microphone functions in starboard/microphone.h or use the provided stub functions. The microphone can be disabled by having SbMicrophoneCreate() return |kSbMicrophoneInvalid|. This change also deprecates the SB_HAS_MICROPHONE flag.
The system must implement the memory mapping functions in starboard/memory.h and starboard/shared/dlmalloc.h or use the provided stub implementations. This change also deprecates the SB_HAS_MMAP flag.
The system must implement the on screen keyboard functions in starboard/window.h or use the provided stub implementations. The on screen keyboard can be disabled by implementing the function SbWindowOnScreenKeyboardIsSupported() to return false as the stub implementation does.
The system must implement the functions in starboard/speech_recognizer.h or use the provided stub implementations. The speech recognizer can be disabled by implementing the function SbSpeechRecognizerIsSupported() to return false as the stub implementation does.
The system must implement the speech synthesis function in starboard/speech_synthesis.h or use the provided stub implementations. Speech synthesis can be disabled by implementing the function SbSpeechSynthesisIsSupported() to return false as the stub implementation does.
The system must implement the time thread now functions in starboard/time.h or use the provided stub implementations. Time thread now can be disabled by implementing the function SbTimeIsTimeThreadNowSupported() to return false as the stub implementation does.
Introduce the Starboard function SbFileAtomicReplace() to provide the ability to atomically replace the content of a file.
Path to directory for permanent storage. Both read and write access are required.
SABI files are used to describe the configuration for targets such that two targets, built with the same SABI file and varying toolchains, have compatible Starboard APIs and ABIs.
With this define, we have:
For further information on what is provided by SABI files, or how these values are consumed, take a look at //starboard/sabi.
SbMutexAcquireTry now has undefined behavior when it is invoked on a mutex that has already been locked by the calling thread. In addition, since SbMutexAcquireTry was used in SbMutexDestroy, SbMutexDestroy now has undefined behavior when invoked on a locked mutex.
The migration allows Cobalt to make platform level decisions at runtime instead of compile time which lets us create a more comprehensive Cobalt binary.
This means Cobalt must remove all references to these macros that would not translate well to constants, i.e. in compile time references or initializing arrays. Therefore, we needed to change the functionality of the function SbDirectoryGetNext in “starboard/directory.h”. Because we do not want to use variable length arrays, we pass in a c-string and length to the function to achieve the same result as before when passing in a SbDirectoryEntry.
A platform will define the extern constants declared in “starboard/configuration_constants.h”. The definitions are done in “starboard/<PLATFORM_PATH>/configuration_constants.cc”.
Introduce the new type SbPlayerCreationParam that holds the common parameters used to create an SbPlayer() and to query for the output mode support.
Replace SbPlayerOutputModeSupported() by SbPlayerGetPreferredOutputMode() so the SbPlayer implementation can explicitly indicate its preference on output mode, when all output modes are supported. For example, Cobalt used to always query for |kSbPlayerOutputModePunchOut| first, without providing details about the video going to be played, and not query for output modes if punch out is supported. The new interface allows the implementation to fine tune its output mode. For example, it may decide to use |kSbPlayerOutputModeDecodeToTexture| for low resolution videos.
The implementation is in: “starboard/shared/starboard/audio_sink/audio_sink_internal.*”.
The following types were updated: SbThread, SbMutex, SbOnce and SbConditionVariable.
The definition follows ISO/IEC 23001 part 7.
This change moves all of the GYP configuration variables to be members of the struct declared in “cobalt/extension/configuration.h”. All members are function pointers that can be set for each platform, otherwise defaults will be used. These can be referenced through functions declared in “cobalt/configuration/configuration.h”, which will use the extension API if available, but will otherwise fall back onto default values.
The PCLMULQDQ was added to the Starboard CPU features interface for x86 architectures.
SbMediaIsAudioSupported().
kSbSystemPropertySystemIntegratorNameThis change also deprecates kSbSystemPropertyOriginalDesignManufacturerName. The kSbSystemPropertySystemIntegratorName value will represent the corporate entity responsible for submitting the device to YouTube certification and for the device maintenance/updates.
Blitter API is no longer supported on any platform. Use the OpenGL ES interface instead.
Crypto API is no longer supported on any platform. BoringSSL CPU optimizations are used instead.
|kSbPlayerDecoderStateDestroyed|.
|SbMediaSetOutputProtection()|.
The variable ‘cobalt_minimum_frame_time_in_milliseconds’ is deprecated in favor of the usage of ‘CobaltExtensionGraphicsApi::GetMinimumFrameIntervalInMilliseconds’ API. The declaration of ‘GetMinimumFrameIntervalInMilliseconds’ can be found in cobalt/renderer/backend/graphics_context.h
The Platform Services API should be used instead. See cobalt/doc/platform_services.md.
If the platform supports text-to-speech settings, it must use the new kSbEventTypeAccessiblityTextToSpeechSettingsChanged event to inform the app when those settings change. For older starboard versions, use kSbEventTypeAccessiblitySettingsChanged instead.
Now the Starboard implementation may choose to support |key_system| with extra attributes, in order to selectively support encryption schemes on particular containers or codecs. The Starboard implementation needn't support |key_system| with extra attributes if it meets the requirements for the default implementation of Navigator.requestMediaKeySystemAccess(), which assumes that:
Please see the comment of SbMediaCanPlayMimeAndKeySystem() in media.h for more details.
SbMediaIsVideoSupported.Add arguments for profile, level, bit depth, color primaries, transfer characteristics, and matrix coefficients. See comments of SbMediaIsVideoSupported for more details. Also, the function SbMediaIsTransferCharacteristicsSupported() is no longer necessary and is removed.
kSbMediaVideoCodecVp10 with kSbMediaVideoCodecAv1.kSbPlayerErrorMax in starboard/player.h.max_video_capabilities to SbPlayerCreate().This gives the application the option to specify to the SbPlayer object what the maximum video specifications will be, as a hint to the platform on how to allocate resources for the SbPlayer. For example, if the player will never exceed a 240p playback resolution, then a software decoder may be initialized. Please see comment in SbPlayerCreate() for more details.
SbPlayerSampleInfo to reuse SbPlayerSampleInfo in filter based player.Additionally, add audio and codec info for every sample.
Add a function SbMediaSetAudioWriteDuration() to starboard/media.h which communicates to the platform how much audio will be sent to the platform at a time.
Cobalt extensions implement app & platform specific functionality.
SbSystemClearPlatformError().kSbEventTypeNetworkDisconnect and kSbEventTypeNetworkConnect.By setting SB_HAS_STD_UNORDERED_HASH to 1, a platform can be configured to use C++11 standard hash table implementations, specifically, using:
std::unordered_map<> for base::hash_map<>std::unordered_multimap<> for base::hash_multimap<>std::unordered_set<> for base::hash_set<>std::unordered_multiset<> for base::hash_multiset<>When SB_HAS_STD_UNORDERED_HASH is used, it is no longer necessary to specify SB_HAS_LONG_LONG_HASH, SB_HAS_STRING_HASH, SB_HAS_HASH_USING, SB_HAS_HASH_VALUE, SB_HAS_HASH_WARNING, SB_HASH_MAP_INCLUDE, SB_HASH_NAMESPACE, or SB_HASH_SET_INCLUDE.
When a platform knows its physical screen diagonal length, it can now provide that data to the application via SbWindowGetDiagonalSizeInInches().
The system properties kSbSystemPropertyCertificationScope and kSbSystemPropertyBase64EncodedCertificationSecret have been added to enable client apps to perform device authentication. The values will be queried by calls to SbSystemGetProperty() in starboard/system.h. An alternative to providing the kSbSystemPropertyBase64EncodedCertificationSecret property is to implement the SbSystemSignWithCertificationSecretKey() function, enabling the key to remain private and secure.
SbThreadSampler and SbThreadContext.This is helpful for enabling the implementation of sampling-based profilers. A full implementation is only required if the new function SbThreadSamplerIsSupported() returns true. A valid implementation will need to implement the new starboard/thread.h functions, SbThreadContextGetPointer(), SbThreadSamplerIsSupported(), SbThreadSamplerCreate(), SbThreadSamplerDestroy(), SbThreadSamplerFreeze(), SbThreadSamplerThaw().
A new API in starboard/window.h is introduced which declares the functions SbWindowUpdateOnScreenKeyboardSuggestions() and SbWindowOnScreenKeyboardSuggestionsSupported(). This is only relevant if SB_HAS(ON_SCREEN_KEYBOARD).
kSbFileErrorIO.The new code, added to starboard/file.h, should match “EIO” on Posix platforms.
FormatString() from starboard/string.h to starboard/format_string.h.The SbDecodeTargetInfoContentRegion struct is modified to accept floats instead of ints. The primary motivation for this change is to make it so that on platforms where it is difficult to obtain the width and height of a texture, we can still correctly identify a precise fractional “normalized” content region with the texture width and height set to 1.
kSbSystemPropertyOriginalDesignManufacturerName enum value.This change also deprecates kSbSystemPropertyNetworkOperatorName. The kSbSystemPropertyOriginalDesignManufacturerName value will represent the corporate entity responsible for the manufacturing/assembly of the device on behalf of the business entity owning the brand.
Cross-platform helper Starboard definitions refactored out of /starboard/ and into /starboard/common/. In order to more explicitly identify the core Starboard API, multiple files, or parts of them, were moved into the static library /starboard/common/.
The application is no longer responsible for synchronizing (e.g. via mutex) calls to Starboard logging, this is now expected to be done by the Starboard implementation. Logging functions, such as SbLog or SbLogRaw, must now have implementations that are thread-safe because they will be called from multiple threads without external synchronization.
Additionally, the minimum logging level is no longer set by the application, and is instead set by grabbing the value as a command-line argument within Starboard.
To remove the direct inclusion of EGL and GLES system libraries throughout the application, we need to move this dependency behind a Starboardized API. This API can be found in /starboard/egl.h and /starboard/gles.h.
/starboard/cpu_features.h.The new interface enables the platform to communicate to the application which CPU features are available, which can enable the application to perform certain CPU-specific optimizations (e.g. SIMD).
SB_HAS_DRM_KEY_STATUSES.
These macros must always be set to 1 for Starboard version 6 or later. They will be removed in a future version. Any implementation that supports Starboard version 6 or later should be modified to no longer depend on these macros, with the assumption that their values are always 1.
In particular, the following methods are introduced:
SbMediaGetAudioBufferBudgetSbMediaGetBufferAlignmentSbMediaGetBufferAllocationUnitSbMediaGetBufferGarbageCollectionDurationThresholdSbMediaGetBufferPaddingSbMediaGetBufferStorageTypeSbMediaGetInitialBufferCapacitySbMediaGetMaxBufferCapacitySbMediaGetProgressiveBufferBudgetSbMediaGetVideoBufferBudgetSbMediaIsBufferPoolAllocateOnDemandSbMediaIsBufferUsingMemoryPoolRequire compiling ‘player_filter_tests’ test target sources on all platforms, including audio_decoder_tests.cc and video_decoder_test.cc. For this Starboard API version and beyond, SB_HAS(PLAYER_FILTER_TESTS) is true.
SbMediaTime, which is 90khz based, was used to represent timestamps and duration related to SbPlayer. As most of the platforms represent video related times in milliseconds or microseconds, this causes a lot of otherwise unnecessary conversion. Now all timestamps and duration related to SbPlayer are represented by SbTime directly.
Added two new functions SbPlayerGetMaximumNumberOfSamplesPerWrite() and SbPlayerWriteSample2(). The former allows implementation to specify the maximum numbers of samples that can be written using the latter at once. As it takes multiple thread context switches to call SbPlayerWriteSample2() once, it can optimize performance on low end platforms by reducing the frequence of calling SbPlayerWriteSample2().
SbPlayerCreate() now accepts an additional parameter, player_error_func, that can be called when an error occurs to propagate the error to the application.
SbAccessibilityGetCaptionSettings() and SbAccessibilitySetCaptionsEnabled() along with a number of supporting structure definitions have been added to accessibility.h. Platforms will need to define SB_HAS_CAPTIONS to 1 in order to enable the interface.
SbPlayer can be created with only a video track, without any accompanying audio track. The SbPlayer implementation must now be able to play back a sole video track.
SbPlayer can be created with only an audio track, without any accompanying video track. The SbPlayer implementation must now be able to play back a sole audio track.
Formerly, there were no tests ensuring that calling SbPlayerCreate() multiple times (without calling SbPlayerDestroy() in between) would not crash, and likewise no tests ensuring that calling SbAudioSinkCreate() multiple times (without calling SbAudioSinkDestroy() in between) would not crash. SbPlayerCreate() may return kSbPlayerInvalid if additional players are not supported. SbAudioSinkCreate() may return kSbAudionSinkInvalid if additional audio sinks are not supported.
Specifically, SbPlayerCreate(), SbPlayerCreateWithUrl() and SbDrmCreateSystem() must result in invalid return values (e.g. kSbPlayerInvalid or kSbDrmSystemInvalid appropriately).
Specifically, the following changes have been made:
SbDrmSessionUpdateRequestFunc and SbDrmSessionUpdatedFunc with extra status and optional error message.SbDrmSessionUpdateRequestFunc to support individualization, license renewal, and license release.Test code looking for its static input files should instead use the test subdirectory in kSbSystemPathContentDirectory.
This property was only ever used in platforms using in_app_dial. The only usage of this system property was replaced with a self-contained mechanism.
SB_HAS_QUIRK_SUPPORT_INT16_AUDIO_SAMPLES has to be defined to continue support int16 audio samples after this version.
This allows the SbPlayer implementation to notify the app that its playback capability has changed during a video playback. For example, the system may support vp9 decoding with an external GPU. When the external GPU is detached, this error code can signal the app to retry the playback, possibly with h264.
Platforms doesn't need to resume after suspend can return false in SbSystemSupportsResume() to free up the resource used by resume after suspend. Please see the comment in system.h for more details.
kSbKeyMicrophone keycodekSbDecodeTargetFormat3Plane10BitYUVI420Added kSbDecodeTargetFormat3Plane10BitYUVI420 to the SbDecodeTargetFormat enum in order to support 10-bit YUV textures.
SbAudioSinkConsumeFramesFunc()SbAudioSinkConsumeFramesFunc() can now optionally accept an absolute timestamp parameter that indicates when the frames are consumed. Platforms that have the frames_consumed updated asynchronously can have more accurate audio time reporting with this extra parameter. Please see the comment in audio_sink.h for more details.
SbAtomic8 type and memory access functionsSbMemoryProtect()SbMemoryProtect() allows memory access permissions to be changed after they have been mapped with SbMemoryMap.
timestamp field to SbInputDataThis allows platforms to provide more precise information on exactly when an input event was generated. Note that if SbSystemHasCapability(kSbSystemCapabilitySetsInputTimestamp) returns false, the timestamp field of SbInputData should be ignored by applications.
kSbMemoryMapProtectReserved flag.kSbMemoryMapProtectReserved, which is identical to SbMemoryMapFlags(0), is introduced. When SbMemoryMap() is called with kSbMemoryMapProtectReserved, only virtual address space should be reserved for the mapped memory, and not actual physical memory.
An extra version agnostic ffmpeg dynamic dispatch layer is added in order to support multiple different versions of ffmpeg as may appear on user systems.
While common Cobalt code still targets EGL/GLES2, we now use Angle on linux-x64x11 builds to translate those calls to GLX/GL calls. Thus, from the perspective of the system, linux-x64x11 builds now appear to use GLX/GL. This change was made because GLX/GL was generally found to have better desktop support than EGL/GLES2. The logic for this is added in the Starboard enable_glx_via_angle.gypi file.
base.gypi into cobalt_configuration.gypi and base_configuration.gypiUp until now, both Cobalt-specific build configuration options as well as application-independent Starboard build configuration options were mixed together within base.gypi. They have now been split apart, and the application independent options have been moved into Starboard under base_configuration.gypi. The Cobalt-specific options have been left in Cobalt, though renamed to cobalt_configuration.gypi.
tizen to contrib/tizen.Please see contrib/README.md for description of expectations for contents in this directory.