/*
 * jerror.c
 *
 * This file was part of the Independent JPEG Group's software:
 * Copyright (C) 1991-1998, Thomas G. Lane.
 * libjpeg-turbo Modifications:
 * Copyright (C) 2022, D. R. Commander.
 * For conditions of distribution and use, see the accompanying README.ijg
 * file.
 *
 * This file contains simple error-reporting and trace-message routines.
 * These are suitable for Unix-like systems and others where writing to
 * stderr is the right thing to do.  Many applications will want to replace
 * some or all of these routines.
 *
 * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile,
 * you get a Windows-specific hack to display error messages in a dialog box.
 * It ain't much, but it beats dropping error messages into the bit bucket,
 * which is what happens to output to stderr under most Windows C compilers.
 *
 * These routines are used by both the compression and decompression code.
 */

/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
#include "jinclude.h"
#include "jpeglib.h"
#include "jversion.h"
#include "jerror.h"

#ifdef USE_WINDOWS_MESSAGEBOX
#include <windows.h>
#endif

#if defined(STARBOARD)
#include "starboard/common/log.h"
#include "starboard/string.h"
#include "starboard/system.h"
// Applications should not leave the standard error handler registered.
#define exit(x) SbSystemBreakIntoDebugger()
#endif

#ifndef EXIT_FAILURE            /* define exit() codes if not provided */
#define EXIT_FAILURE  1
#endif


/*
 * Create the message string table.
 * We do this from the master message list in jerror.h by re-reading
 * jerror.h with a suitable definition for macro JMESSAGE.
 * The message table is made an external symbol just in case any applications
 * want to refer to it directly.
 */

#define JMESSAGE(code, string)  string,

const char * const jpeg_std_message_table[] = {
#include "jerror.h"
  NULL
};


/*
 * Error exit handler: must not return to caller.
 *
 * Applications may override this if they want to get control back after
 * an error.  Typically one would longjmp somewhere instead of exiting.
 * The setjmp buffer can be made a private field within an expanded error
 * handler object.  Note that the info needed to generate an error message
 * is stored in the error object, so you can generate the message now or
 * later, at your convenience.
 * You should make sure that the JPEG object is cleaned up (with jpeg_abort
 * or jpeg_destroy) at some point.
 */

METHODDEF(void)
error_exit(j_common_ptr cinfo)
{
  /* Always display the message */
  (*cinfo->err->output_message) (cinfo);

  /* Let the memory manager delete any temp files before we die */
  jpeg_destroy(cinfo);

  exit(EXIT_FAILURE);
}


/*
 * Actual output of an error or trace message.
 * Applications may override this method to send JPEG messages somewhere
 * other than stderr.
 *
 * On Windows, printing to stderr is generally completely useless,
 * so we provide optional code to produce an error-dialog popup.
 * Most Windows applications will still prefer to override this routine,
 * but if they don't, it'll do something at least marginally useful.
 *
 * NOTE: to use the library in an environment that doesn't support the
 * C stdio library, you may have to delete the call to fprintf() entirely,
 * not just not use this routine.
 */

METHODDEF(void)
output_message(j_common_ptr cinfo)
{
  char buffer[JMSG_LENGTH_MAX];

  /* Create the message */
  (*cinfo->err->format_message) (cinfo, buffer);

#ifdef USE_WINDOWS_MESSAGEBOX
  /* Display it in a message dialog box */
  MessageBox(GetActiveWindow(), buffer, "JPEG Library Error",
             MB_OK | MB_ICONERROR);
#else
  /* Send it to stderr, adding a newline */
#if !defined(STARBOARD)
  fprintf(stderr, "%s\n", buffer);
#endif
#endif
}


/*
 * Decide whether to emit a trace or warning message.
 * msg_level is one of:
 *   -1: recoverable corrupt-data warning, may want to abort.
 *    0: important advisory messages (always display to user).
 *    1: first level of tracing detail.
 *    2,3,...: successively more detailed tracing messages.
 * An application might override this method if it wanted to abort on warnings
 * or change the policy about which messages to display.
 */

METHODDEF(void)
emit_message(j_common_ptr cinfo, int msg_level)
{
  struct jpeg_error_mgr *err = cinfo->err;

  if (msg_level < 0) {
    /* It's a warning message.  Since corrupt files may generate many warnings,
     * the policy implemented here is to show only the first warning,
     * unless trace_level >= 3.
     */
    if (err->num_warnings == 0 || err->trace_level >= 3)
      (*err->output_message) (cinfo);
    /* Always count warnings in num_warnings. */
    err->num_warnings++;
  } else {
    /* It's a trace message.  Show it if trace_level >= msg_level. */
    if (err->trace_level >= msg_level)
      (*err->output_message) (cinfo);
  }
}


/*
 * Format a message string for the most recent JPEG error or message.
 * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX
 * characters.  Note that no '\n' character is added to the string.
 * Few applications should need to override this method.
 */

METHODDEF(void)
format_message(j_common_ptr cinfo, char *buffer)
{
  struct jpeg_error_mgr *err = cinfo->err;
  int msg_code = err->msg_code;
  const char *msgtext = NULL;
  const char *msgptr;
  char ch;
  boolean isstring;

  /* Look up message string in proper table */
  if (msg_code > 0 && msg_code <= err->last_jpeg_message) {
    msgtext = err->jpeg_message_table[msg_code];
  } else if (err->addon_message_table != NULL &&
             msg_code >= err->first_addon_message &&
             msg_code <= err->last_addon_message) {
    msgtext = err->addon_message_table[msg_code - err->first_addon_message];
  }

  /* Defend against bogus message number */
  if (msgtext == NULL) {
    err->msg_parm.i[0] = msg_code;
    msgtext = err->jpeg_message_table[0];
  }

  /* Check for string parameter, as indicated by %s in the message text */
  isstring = FALSE;
  msgptr = msgtext;
  while ((ch = *msgptr++) != '\0') {
    if (ch == '%') {
      if (*msgptr == 's') isstring = TRUE;
      break;
    }
  }

  /* Format the message into the passed buffer */
  if (isstring)
    SNPRINTF(buffer, JMSG_LENGTH_MAX, msgtext, err->msg_parm.s);
  else
    SNPRINTF(buffer, JMSG_LENGTH_MAX, msgtext,
             err->msg_parm.i[0], err->msg_parm.i[1],
             err->msg_parm.i[2], err->msg_parm.i[3],
             err->msg_parm.i[4], err->msg_parm.i[5],
             err->msg_parm.i[6], err->msg_parm.i[7]);
}


/*
 * Reset error state variables at start of a new image.
 * This is called during compression startup to reset trace/error
 * processing to default state, without losing any application-specific
 * method pointers.  An application might possibly want to override
 * this method if it has additional error processing state.
 */

METHODDEF(void)
reset_error_mgr(j_common_ptr cinfo)
{
  cinfo->err->num_warnings = 0;
  /* trace_level is not reset since it is an application-supplied parameter */
  cinfo->err->msg_code = 0;     /* may be useful as a flag for "no error" */
}


/*
 * Fill in the standard error-handling methods in a jpeg_error_mgr object.
 * Typical call is:
 *      struct jpeg_compress_struct cinfo;
 *      struct jpeg_error_mgr err;
 *
 *      cinfo.err = jpeg_std_error(&err);
 * after which the application may override some of the methods.
 */

GLOBAL(struct jpeg_error_mgr *)
jpeg_std_error(struct jpeg_error_mgr *err)
{
  err->error_exit = error_exit;
  err->emit_message = emit_message;
  err->output_message = output_message;
  err->format_message = format_message;
  err->reset_error_mgr = reset_error_mgr;

  err->trace_level = 0;         /* default = no tracing */
  err->num_warnings = 0;        /* no warnings emitted yet */
  err->msg_code = 0;            /* may be useful as a flag for "no error" */

  /* Initialize message table pointers */
  err->jpeg_message_table = jpeg_std_message_table;
  err->last_jpeg_message = (int)JMSG_LASTMSGCODE - 1;

  err->addon_message_table = NULL;
  err->first_addon_message = 0; /* for safety */
  err->last_addon_message = 0;

  return err;
}