| # Copyright 2017 The Cobalt Authors. All Rights Reserved. | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # Import platform-specific defaults | |
| import("//$starboard_path/configuration.gni") | |
| # Import starboard variables | |
| import("//starboard/build/config/base.gni") | |
| # Cobalt variables. | |
| # Enable support for the map to mesh filter, which is primarily used to | |
| # implement spherical video playback. | |
| if (!defined(enable_map_to_mesh)) { | |
| enable_map_to_mesh = false | |
| } | |
| # This variable defines what Cobalt's preferred strategy should be for | |
| # handling internally triggered application exit requests (e.g. the user | |
| # chooses to back out of the application). | |
| # "stop" -- The application should call SbSystemRequestStop() on exit, | |
| # resulting in a complete shutdown of the application. | |
| # "suspend" -- The application should call SbSystemRequestSuspend() on | |
| # exit, resulting in the application being "minimized". | |
| # "noexit" -- The application should never allow the user to trigger an | |
| # exit, this will be managed by the system. | |
| if (!defined(cobalt_user_on_exit_strategy)) { | |
| cobalt_user_on_exit_strategy = "stop" | |
| } | |
| # Contains the current font package selection. This can be used to trade | |
| # font quality, coverage, and latency for different font package sizes. | |
| # The font package can be one of the following options: | |
| # "standard" -- The default package. It includes all sans-serif, serif, and | |
| # FCC fonts, non-CJK fallback fonts in both 'normal' and 'bold' | |
| # weights, 'normal' weight CJK ('bold' weight CJK is synthesized | |
| # from it), historic script fonts, and color emojis. This | |
| # package is ~38.3MB. | |
| # 'limited' -- A significantly smaller package than 'standard'. This package | |
| # removes all but 'normal' and 'bold' weighted sans-serif and | |
| # serif, removes the FCC fonts (which must be provided by the | |
| # system or downloaded from the web), replaces standard CJK with | |
| # low quality CJK, removes historic script fonts, and replaces | |
| # colored emojis with uncolored ones. Because low quality CJK | |
| # cannot synthesize bold, bold glyphs are unavailable in | |
| # Chinese, Japanese and Korean. This package is ~8.3MB. | |
| # "minimal" -- The smallest possible font package. It only includes Roboto's | |
| # Basic Latin characters. Everything else must be provided by | |
| # the system or downloaded from the web. This package is | |
| # ~40.0KB. | |
| # NOTE: When bold is needed, but unavailable, it is typically synthesized, | |
| # resulting in lower quality glyphs than those generated directly from | |
| # a bold font. However, this does not occur with low quality CJK, | |
| # which is not high enough quality to synthesize. Its glyphs always | |
| # have a 'normal' weight. | |
| if (!defined(cobalt_font_package)) { | |
| cobalt_font_package = "standard" | |
| } | |
| # Font package overrides can be used to modify the files included within the | |
| # selected package. The following values are available: | |
| # -1 -- The package value for the specified category is not overridden. | |
| # 0 -- The package value is overridden and no fonts for the specified | |
| # category are included. | |
| # 1 -- The package value is overridden and fonts from the specified | |
| # category with a weight of 'normal' and a style of 'normal' are | |
| # included. | |
| # 2 -- The package value is overridden and fonts from the specified | |
| # category with a weight of either 'normal' or bold' and a style of | |
| # 'normal' are included. | |
| # 3 -- The package value is overridden and fonts from the specified | |
| # category with a weight of either 'normal' or 'bold' and a style of | |
| # either 'normal' or 'italic' are included. | |
| # 4 -- The package value is overridden and all available fonts from the | |
| # specified category are included. This may include additional | |
| # weights beyond 'normal' and 'bold'. | |
| # See content/fonts/README.md for details on the specific values used by | |
| # each of the packages use for the various font categories. | |
| if (!defined(cobalt_font_package_override_named_sans_serif)) { | |
| cobalt_font_package_override_named_sans_serif = -1 | |
| } | |
| if (!defined(cobalt_font_package_override_named_serif)) { | |
| cobalt_font_package_override_named_serif = -1 | |
| } | |
| if (!defined(cobalt_font_package_override_named_fcc_fonts)) { | |
| cobalt_font_package_override_named_fcc_fonts = -1 | |
| } | |
| if (!defined(cobalt_font_package_override_fallback_lang_non_cjk)) { | |
| cobalt_font_package_override_fallback_lang_non_cjk = -1 | |
| } | |
| if (!defined(cobalt_font_package_override_fallback_lang_cjk)) { | |
| cobalt_font_package_override_fallback_lang_cjk = -1 | |
| } | |
| if (!defined(cobalt_font_package_override_fallback_lang_cjk_low_quality)) { | |
| cobalt_font_package_override_fallback_lang_cjk_low_quality = -1 | |
| } | |
| if (!defined(cobalt_font_package_override_fallback_historic)) { | |
| cobalt_font_package_override_fallback_historic = -1 | |
| } | |
| if (!defined(cobalt_font_package_override_fallback_emoji)) { | |
| cobalt_font_package_override_fallback_emoji = -1 | |
| } | |
| if (!defined(cobalt_font_package_override_fallback_symbols)) { | |
| cobalt_font_package_override_fallback_symbols = -1 | |
| } | |
| # The target platform id as a string, like "ps4", etc.. | |
| # TODO: eliminate when all platforms are fully starboard. | |
| if (!defined(sb_target_platform)) { | |
| sb_target_platform = "" | |
| } | |
| # Defines what kind of rasterizer will be used. This can be adjusted to | |
| # force a stub graphics implementation or software graphics implementation. | |
| # It can be one of the following options: | |
| # 'direct-gles' -- Uses a light wrapper over OpenGL ES to handle most | |
| # draw elements. This will fall back to the skia hardware | |
| # rasterizer for some render tree node types, but is | |
| # generally faster on the CPU and GPU. This can handle | |
| # 360 rendering. | |
| # 'hardware' -- As much hardware acceleration of graphics commands as | |
| # possible. This uses skia to wrap OpenGL ES commands. | |
| # Required for 360 rendering. | |
| # 'software' -- Perform most rasterization using the CPU and only | |
| # interact with the GPU to send the final image to the | |
| # output window. | |
| # 'stub' -- Stub graphics rasterization. A rasterizer object will | |
| # still be available and valid, but it will do nothing. | |
| if (!defined(rasterizer_type)) { | |
| rasterizer_type = "direct-gles" | |
| } | |
| # If set to true, will enable support for rendering only the regions of the | |
| # display that are modified due to animations, instead of re-rendering the | |
| # entire scene each frame. This feature can reduce startup time where | |
| # usually there is a small loading spinner animating on the screen. On GLES | |
| # renderers, Cobalt will attempt to implement this support by using | |
| # eglSurfaceAttrib(..., EGL_SWAP_BEHAVIOR, EGL_BUFFER_PRESERVED), otherwise | |
| # the dirty region will be silently disabled. On Blitter API platforms, | |
| # if this is enabled, we explicitly create an extra offscreen full-size | |
| # intermediate surface to render into. Note that some GLES driver | |
| # implementations may internally allocate an extra full screen surface to | |
| # support this feature, and many have been noticed to not properly support | |
| # this functionality (but they report that they do), and for these reasons | |
| # this value is defaulted to false. | |
| if (!defined(render_dirty_region_only)) { | |
| render_dirty_region_only = false | |
| } | |
| # Modify this value to adjust the default rasterizer setting for your | |
| # platform. | |
| if (!defined(default_renderer_options_dependency)) { | |
| default_renderer_options_dependency = "//cobalt/renderer:default_options" | |
| } | |
| # Allow throttling of the frame rate. This is expressed in terms of | |
| # milliseconds and can be a floating point number. Keep in mind that | |
| # swapping frames may take some additional processing time, so it may be | |
| # better to specify a lower delay. For example, "33" instead of "33.33" | |
| # for 30 Hz refresh. | |
| if (!defined(cobalt_minimum_frame_time_in_milliseconds)) { | |
| cobalt_minimum_frame_time_in_milliseconds = "16.4" | |
| } | |
| # Cobalt will call eglSwapInterval() and specify this value before calling | |
| # eglSwapBuffers() each frame. | |
| if (!defined(cobalt_egl_swap_interval)) { | |
| cobalt_egl_swap_interval = 1 | |
| } | |
| # Set to true to build with DIAL support. | |
| if (!defined(enable_in_app_dial)) { | |
| enable_in_app_dial = false | |
| } | |
| # Set to true to enable a custom MediaSessionClient. | |
| if (!defined(enable_custom_media_session_client)) { | |
| enable_custom_media_session_client = false | |
| } | |
| # Set to true to enable H5vccAccountManager. | |
| if (!defined(enable_account_manager)) { | |
| enable_account_manager = false | |
| } | |
| # Set to true to enable H5vccCrashLog. | |
| if (!defined(enable_crash_log)) { | |
| enable_crash_log = false | |
| } | |
| # Set to true to enable H5vccSSO (Single Sign On). | |
| if (!defined(enable_sso)) { | |
| enable_sso = false | |
| } | |
| # Set to true to compile with SPDY support. | |
| if (!defined(enable_spdy)) { | |
| enable_spdy = false | |
| } | |
| # Set to true to enable filtering of HTTP headers before sending. | |
| if (!defined(enable_xhr_header_filtering)) { | |
| enable_xhr_header_filtering = false | |
| } | |
| # Used by //cobalt/media to pick a proper media platform. | |
| if (!defined(sb_media_platform)) { | |
| sb_media_platform = "starboard" | |
| } | |
| # List of platform-specific targets that get compiled into cobalt. | |
| if (!defined(cobalt_platform_dependencies)) { | |
| cobalt_platform_dependencies = [] | |
| } | |
| # The URL of default build time splash screen - see | |
| # cobalt/doc/splash_screen.md for information about this. | |
| if (!defined(fallback_splash_screen_url)) { | |
| fallback_splash_screen_url = "none" | |
| } | |
| # The path to a splash screen to copy into content/data/web which can be | |
| # accessed via a file URL starting with | |
| # "file:///cobalt/browser/splash_screen/". If "", no file is copied. | |
| if (!defined(cobalt_splash_screen_file)) { | |
| cobalt_splash_screen_file = "" | |
| } | |
| # Cache parameters | |
| # The following set of parameters define how much memory is reserved for | |
| # different Cobalt caches. These caches affect CPU *and* GPU memory usage. | |
| # | |
| # The sum of the following caches effectively describes the maximum GPU | |
| # texture memory usage (though it doesn't consider video textures and | |
| # display color buffers): | |
| # - skia_cache_size_in_bytes (GLES2 rasterizer only) | |
| # - scratch_surface_cache_size_in_bytes | |
| # - surface_cache_size_in_bytes | |
| # - image_cache_size_in_bytes | |
| # - skia_glyph_atlas_width * skia_glyph_atlas_height | |
| # | |
| # The other caches affect CPU memory usage. | |
| # Determines the capacity of the skia cache. The Skia cache is maintained | |
| # within Skia and is used to cache the results of complicated effects such | |
| # as shadows, so that Skia draw calls that are used repeatedly across | |
| # frames can be cached into surfaces. This setting is only relevant when | |
| # using the hardware-accelerated Skia rasterizer (e.g. as opposed to the | |
| # Blitter API). | |
| if (!defined(skia_cache_size_in_bytes)) { | |
| skia_cache_size_in_bytes = "(4 * 1024 * 1024)" | |
| } | |
| # Determines the capacity of the scratch surface cache. The scratch | |
| # surface cache facilitates the reuse of temporary offscreen surfaces | |
| # within a single frame. This setting is only relevant when using the | |
| # hardware-accelerated Skia rasterizer. | |
| if (!defined(scratch_surface_cache_size_in_bytes)) { | |
| scratch_surface_cache_size_in_bytes = 0 | |
| } | |
| # Determines the capacity of the surface cache. The surface cache tracks | |
| # which render tree nodes are being re-used across frames and stores the | |
| # nodes that are most CPU-expensive to render into surfaces. | |
| if (!defined(surface_cache_size_in_bytes)) { | |
| surface_cache_size_in_bytes = 0 | |
| } | |
| # Determines the amount of GPU memory the offscreen target atlases will | |
| # use. This is specific to the direct-GLES rasterizer and serves a similar | |
| # purpose as the surface_cache_size_in_bytes, but caches any render tree | |
| # nodes which require skia for rendering. Two atlases will be allocated | |
| # from this memory or multiple atlases of the frame size if the limit | |
| # allows. It is recommended that enough memory be reserved for two RGBA | |
| # atlases about a quarter of the frame size. | |
| if (!defined(offscreen_target_cache_size_in_bytes)) { | |
| offscreen_target_cache_size_in_bytes = -1 | |
| } | |
| # Determines the capacity of the image cache, which manages image surfaces | |
| # downloaded from a web page. While it depends on the platform, often (and | |
| # ideally) these images are cached within GPU memory. | |
| # Set to -1 to automatically calculate the value at runtime, based on | |
| # features like windows dimensions and the value of | |
| # SbSystemGetTotalGPUMemory(). | |
| if (!defined(image_cache_size_in_bytes)) { | |
| image_cache_size_in_bytes = -1 | |
| } | |
| # Determines the capacity of the local font cache, which manages all fonts | |
| # loaded from local files. Newly encountered sections of font files are | |
| # lazily loaded into the cache, enabling subsequent requests to the same | |
| # file sections to be handled via direct memory access. Once the limit is | |
| # reached, further requests are handled via file stream. | |
| # Setting the value to 0 disables memory caching and causes all font file | |
| # accesses to be done using file streams. | |
| if (!defined(local_font_cache_size_in_bytes)) { | |
| local_font_cache_size_in_bytes = "(16 * 1024 * 1024)" | |
| } | |
| # Determines the capacity of the remote font cache, which manages all | |
| # fonts downloaded from a web page. | |
| if (!defined(remote_font_cache_size_in_bytes)) { | |
| remote_font_cache_size_in_bytes = "(4 * 1024 * 1024)" | |
| } | |
| # Determines the capacity of the mesh cache. Each mesh is held compressed | |
| # in main memory, to be inflated into a GPU buffer when needed for | |
| # projection. When set to "auto", will be adjusted according to whether | |
| # the enable_map_to_mesh is true or not. If enable_map_to_mesh is false, | |
| # then the mesh cache size will be set to 0. | |
| if (!defined(mesh_cache_size_in_bytes)) { | |
| mesh_cache_size_in_bytes = "auto" | |
| } | |
| # Only relevant if you are using the Blitter API. | |
| # Determines the capacity of the software surface cache, which is used to | |
| # cache all surfaces that are rendered via a software rasterizer to avoid | |
| # re-rendering them. | |
| if (!defined(software_surface_cache_size_in_bytes)) { | |
| software_surface_cache_size_in_bytes = "(8 * 1024 * 1024)" | |
| } | |
| # Modifying this value to be non-1.0f will result in the image cache | |
| # capacity being cleared and then temporarily reduced for the duration that | |
| # a video is playing. This can be useful for some platforms if they are | |
| # particularly constrained for (GPU) memory during video playback. When | |
| # playing a video, the image cache is reduced to: | |
| # image_cache_size_in_bytes * | |
| # image_cache_capacity_multiplier_when_playing_video. | |
| if (!defined(image_cache_capacity_multiplier_when_playing_video)) { | |
| image_cache_capacity_multiplier_when_playing_video = "1.0f" | |
| } | |
| # Determines the size in pixels of the glyph atlas where rendered glyphs are | |
| # cached. The resulting memory usage is 2 bytes of GPU memory per pixel. | |
| # When a value is used that is too small, thrashing may occur that will | |
| # result in visible stutter. Such thrashing is more likely to occur when CJK | |
| # language glyphs are rendered and when the size of the glyphs in pixels is | |
| # larger, such as for higher resolution displays. | |
| # The negative default values indicates to the engine that these settings | |
| # should be automatically set. | |
| if (!defined(skia_glyph_atlas_width)) { | |
| skia_glyph_atlas_width = "-1" | |
| } | |
| if (!defined(skia_glyph_atlas_height)) { | |
| skia_glyph_atlas_height = "-1" | |
| } | |
| # Determines the size of garbage collection threshold. After this many bytes | |
| # have been allocated, the mozjs garbage collector will run. Lowering this | |
| # has been found to reduce performance and decrease JavaScript memory usage. | |
| # For example, we have measured on at least one platform that performance | |
| # becomes 7% worse on average in certain cases when adjusting this number | |
| # from 8MB to 1MB. | |
| if (!defined(mozjs_garbage_collection_threshold_in_bytes)) { | |
| mozjs_garbage_collection_threshold_in_bytes = "(8 * 1024 * 1024)" | |
| } | |
| # Max Cobalt CPU usage specifies that the cobalt program should | |
| # keep it's size below the specified size. A value of -1 causes this | |
| # value to be assumed from the starboard API function: | |
| # SbSystemGetTotalCPUMemory(). | |
| if (!defined(max_cobalt_cpu_usage)) { | |
| max_cobalt_cpu_usage = -1 | |
| } | |
| if (!defined(max_cobalt_gpu_usage)) { | |
| # Max Cobalt GPU usage specifies that the cobalt program should | |
| # keep it's size below the specified size. A value of -1 causes this | |
| # value to be assumed from the starboard API function: | |
| # SbSystemGetTotalGPUMemory(). | |
| max_cobalt_gpu_usage = -1 | |
| } | |
| # When specified this value will reduce the cpu memory consumption by | |
| # the specified amount. -1 disables the value. | |
| # When this value is specified then max_cobalt_cpu_usage will not be | |
| # used in memory_constrainer, but will still be used for triggering | |
| # a warning if the engine consumes more memory than this value specifies. | |
| if (!defined(reduce_cpu_memory_by)) { | |
| reduce_cpu_memory_by = -1 | |
| } | |
| # When specified this value will reduce the gpu memory consumption by | |
| # the specified amount. -1 disables the value. | |
| # When this value is specified then max_cobalt_gpu_usage will not be | |
| # used in memory_constrainer, but will still be used for triggering | |
| # a warning if the engine consumes more memory than this value specifies. | |
| if (!defined(reduce_gpu_memory_by)) { | |
| reduce_gpu_memory_by = -1 | |
| } | |
| # The only currently-supported Javascript engine is "mozjs-45". (However, | |
| # this may potentially change in the future.) | |
| if (!defined(javascript_engine)) { | |
| javascript_engine = "mozjs-45" | |
| } | |
| # Enable jit instead of running in interpreter-only mode by default. | |
| # We have found that disabling jit often results in faster JavaScript | |
| # execution and lower memory usage. | |
| # Setting this to true on a platform or engine for which there is no JIT | |
| # implementation has no effect. | |
| if (!defined(cobalt_enable_jit)) { | |
| cobalt_enable_jit = false | |
| } | |
| # Use media source extension implementation that is conformed to the | |
| # Candidate Recommendation of July 5th 2016. | |
| if (!defined(cobalt_use_media_source_2016)) { | |
| cobalt_use_media_source_2016 = true | |
| } | |
| # Note that the following media buffer related variables are only used when | |
| # |cobalt_use_media_source_2016| is set to true. | |
| # This can be set to "memory" or "file". When it is set to "memory", the | |
| # media buffers will be stored in main memory allocated by SbMemory | |
| # functions. When it is set to "file", the media buffers will be stored in | |
| # a temporary file in the system cache folder acquired by calling | |
| # SbSystemGetPath() with "kSbSystemPathCacheDirectory". Note that when its | |
| # value is "file" the media stack will still allocate memory to cache the | |
| # the buffers in use. | |
| if (!defined(cobalt_media_buffer_storage_type)) { | |
| cobalt_media_buffer_storage_type = "memory" | |
| } | |
| # When either |cobalt_media_buffer_initial_capacity| or | |
| # |cobalt_media_buffer_allocation_unit| isn't zero, media buffers will be | |
| # allocated using a memory pool. Set the following variable to true to | |
| # allocate the media buffer pool memory on demand and return all memory to | |
| # the system when there is no media buffer allocated. Setting the following | |
| # value to false results in that Cobalt will allocate | |
| # |cobalt_media_buffer_initial_capacity| bytes for media buffer on startup | |
| # and will not release any media buffer memory back to the system even if | |
| # there is no media buffers allocated. | |
| if (!defined(cobalt_media_buffer_pool_allocate_on_demand)) { | |
| cobalt_media_buffer_pool_allocate_on_demand = true | |
| } | |
| # The amount of memory that will be used to store media buffers allocated | |
| # during system startup. To allocate a large chunk at startup helps with | |
| # reducing fragmentation and can avoid failures to allocate incrementally. | |
| # This can be set to 0. | |
| if (!defined(cobalt_media_buffer_initial_capacity)) { | |
| cobalt_media_buffer_initial_capacity = "(21 * 1024 * 1024)" | |
| } | |
| # The maximum amount of memory that will be used to store media buffers when | |
| # video resolution is no larger than 1080p. This must be larger than sum of | |
| # 1080p video budget and non-video budget. | |
| if (!defined(cobalt_media_buffer_max_capacity_1080p)) { | |
| cobalt_media_buffer_max_capacity_1080p = "(36 * 1024 * 1024)", | |
| } | |
| # The maximum amount of memory that will be used to store media buffers when | |
| # video resolution is no larger than 4k. This must be larger than sum of 4k | |
| # video budget and non-video budget. | |
| if (!defined(cobalt_buffer_max_capacity_4k)) { | |
| cobalt_media_buffer_max_capacity_4k = "(100 * 1024 * 1024)", | |
| } | |
| # When the media stack needs more memory to store media buffers, it will | |
| # allocate extra memory in units of |cobalt_media_buffer_allocation_unit|. | |
| # This can be set to 0, in which case the media stack will allocate extra | |
| # memory on demand. When |cobalt_media_buffer_initial_capacity| and this | |
| # value are both set to 0, the media stack will allocate individual buffers | |
| # directly using SbMemory functions. | |
| if (!defined(cobalt_media_buffer_allocation_unit)) { | |
| cobalt_media_buffer_allocation_unit = "(1 * 1024 * 1024)" | |
| } | |
| # The media buffer will be allocated using the following alignment. Set | |
| # this to a larger value may increase the memory consumption of media | |
| # buffers. | |
| if (!defined(cobalt_media_buffer_alignment)) { | |
| cobalt_media_buffer_alignment = 1 | |
| } | |
| # Extra bytes allocated at the end of a media buffer to ensure that the | |
| # buffer can be use optimally by specific instructions like SIMD. Set to 0 | |
| # to remove any padding. | |
| if (!defined(cobalt_media_buffer_padding)) { | |
| cobalt_media_buffer_padding = 0 | |
| } | |
| # The memory used when playing mp4 videos that is not in DASH format. The | |
| # resolution of such videos shouldn't go beyond 1080p. Its value should be | |
| # less than the sum of 'cobalt_media_buffer_non_video_budget' and | |
| # 'cobalt_media_buffer_video_budget_1080p' but not less than 8 MB. | |
| if (!defined(cobalt_media_buffer_progressive_budget)) { | |
| cobalt_media_buffer_progressive_budget = "(12 * 1024 * 1024)" | |
| } | |
| # Specifies the maximum amount of memory used by audio or text buffers of | |
| # media source before triggering a garbage collection. A large value will | |
| # cause more memory being used by audio buffers but will also make | |
| # JavaScript app less likely to re-download audio data. Note that the | |
| # JavaScript app may experience significant difficulty if this value is too | |
| # low. | |
| if (!defined(cobalt_media_buffer_non_video_budget)) { | |
| cobalt_media_buffer_non_video_budget = "(5 * 1024 * 1024)" | |
| } | |
| # Specifies the maximum amount of memory used by video buffers of media | |
| # source before triggering a garbage collection when the video resolution is | |
| # lower than 1080p (1920x1080). A large value will cause more memory being | |
| # used by video buffers but will also make JavaScript app less likely to | |
| # re-download video data. Note that the JavaScript app may experience | |
| # significant difficulty if this value is too low. | |
| if (!defined(cobalt_media_buffer_video_budget_1080p)) { | |
| cobalt_media_buffer_video_budget_1080p = "(16 * 1024 * 1024)" | |
| } | |
| # Specifies the maximum amount of memory used by video buffers of media | |
| # source before triggering a garbage collection when the video resolution is | |
| # lower than 4k (3840x2160). A large value will cause more memory being | |
| # used by video buffers but will also make JavaScript app less likely to | |
| # re-download video data. Note that the JavaScript app may experience | |
| # significant difficulty if this value is too low. | |
| if (!defined(cobalt_media_buffer_video_budget_4k)) { | |
| cobalt_media_buffer_video_budget_4k = "(60 * 1024 * 1024)" | |
| } | |
| # Specifies the duration threshold of media source garbage collection. When the | |
| # accumulated duration in a source buffer exceeds this value, the media source | |
| # implementation will try to eject existing buffers from the cache. | |
| # This is usually triggered when the video being played has a simple content and | |
| # the encoded data is small. In such case this can limit how much is allocated | |
| # for the book keeping data of the media buffers and avoid OOM of system heap. | |
| # This should be set to 170 for most of the platforms. But it can be further | |
| # reduced on systems with extremely low memory. | |
| if (!defined(cobalt_media_source_garbage_collection_duration_threshold_in_seconds)) { | |
| cobalt_media_source_garbage_collection_duration_threshold_in_seconds = "(170)" | |
| } | |
| # Enables embedding Cobalt as a shared library within another app. This | |
| # requires a 'lib' starboard implementation for the corresponding platform. | |
| if (!defined(cobalt_enable_lib)) { | |
| cobalt_enable_lib = sb_enable_lib | |
| } | |
| # For configurations other than Gold, set the flag that lets test data files be | |
| # copied and carried along with the build. | |
| # Clients must copy over all content; to avoid having to copy over extra data, | |
| # we omit the test data | |
| _copy_test_data = (cobalt_config != "gold" && !cobalt_enable_lib) | |
| if (!defined(cobalt_copy_debug_console)) { | |
| cobalt_copy_debug_console = _copy_test_data | |
| } | |
| if (!defined(cobalt_copy_test_data)) { | |
| cobalt_copy_test_data = _copy_test_data | |
| } | |
| if (!defined(enable_about_scheme)) { | |
| enable_about_scheme = _copy_test_data | |
| } | |
| if (!defined(enable_fake_microphone)) { | |
| enable_fake_microphone = _copy_test_data | |
| } | |
| if (!defined(enable_network_logging)) { | |
| enable_network_logging = _copy_test_data | |
| } | |
| if (!defined(enable_remote_debugging)) { | |
| enable_remote_debugging = _copy_test_data | |
| } | |
| if (!defined(enable_webdriver)) { | |
| enable_webdriver = _copy_test_data | |
| } | |
| # Use system libjpeg. | |
| if (!defined(use_system_libjpeg)) { | |
| use_system_libjpeg = false | |
| } | |
| # TODO: add ARM compilation flags to the starboard platform config | |
| # TODO: implement remaining flags like clang_type_profiler, build_for_tool, order_profiling, etc. |