| /* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ |
| /* vim: set ts=8 sts=2 et sw=2 tw=80: */ |
| /* This Source Code Form is subject to the terms of the Mozilla Public |
| * License, v. 2.0. If a copy of the MPL was not distributed with this |
| * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ |
| |
| // A simple segmented vector class. |
| // |
| // This class should be used in preference to mozilla::Vector or nsTArray when |
| // you are simply gathering items in order to later iterate over them. |
| // |
| // - In the case where you don't know the final size in advance, using |
| // SegmentedVector avoids the need to repeatedly allocate increasingly large |
| // buffers and copy the data into them. |
| // |
| // - In the case where you know the final size in advance and so can set the |
| // capacity appropriately, using SegmentedVector still avoids the need for |
| // large allocations (which can trigger OOMs). |
| |
| #ifndef mozilla_SegmentedVector_h |
| #define mozilla_SegmentedVector_h |
| |
| #include "mozilla/Alignment.h" |
| #include "mozilla/AllocPolicy.h" |
| #include "mozilla/Array.h" |
| #include "mozilla/LinkedList.h" |
| #include "mozilla/MemoryReporting.h" |
| #include "mozilla/Move.h" |
| #include "mozilla/TypeTraits.h" |
| |
| #include <new> // for placement new |
| |
| namespace mozilla { |
| |
| // |IdealSegmentSize| specifies how big each segment will be in bytes (or as |
| // close as is possible). Use the following guidelines to choose a size. |
| // |
| // - It should be a power-of-two, to avoid slop. |
| // |
| // - It should not be too small, so that segment allocations are infrequent, |
| // and so that per-segment bookkeeping overhead is low. Typically each |
| // segment should be able to hold hundreds of elements, at least. |
| // |
| // - It should not be too large, so that OOMs are unlikely when allocating |
| // segments, and so that not too much space is wasted when the final segment |
| // is not full. |
| // |
| // The ideal size depends on how the SegmentedVector is used and the size of |
| // |T|, but reasonable sizes include 1024, 4096 (the default), 8192, and 16384. |
| // |
| template<typename T, |
| size_t IdealSegmentSize = 4096, |
| typename AllocPolicy = MallocAllocPolicy> |
| class SegmentedVector : private AllocPolicy |
| { |
| template<size_t SegmentCapacity> |
| struct SegmentImpl |
| : public mozilla::LinkedListElement<SegmentImpl<SegmentCapacity>> |
| { |
| SegmentImpl() : mLength(0) {} |
| |
| ~SegmentImpl() |
| { |
| for (uint32_t i = 0; i < mLength; i++) { |
| (*this)[i].~T(); |
| } |
| } |
| |
| uint32_t Length() const { return mLength; } |
| |
| T* Elems() { return reinterpret_cast<T*>(&mStorage.mBuf); } |
| |
| T& operator[](size_t aIndex) |
| { |
| MOZ_ASSERT(aIndex < mLength); |
| return Elems()[aIndex]; |
| } |
| |
| const T& operator[](size_t aIndex) const |
| { |
| MOZ_ASSERT(aIndex < mLength); |
| return Elems()[aIndex]; |
| } |
| |
| template<typename U> |
| void Append(U&& aU) |
| { |
| MOZ_ASSERT(mLength < SegmentCapacity); |
| // Pre-increment mLength so that the bounds-check in operator[] passes. |
| mLength++; |
| T* elem = &(*this)[mLength - 1]; |
| new (elem) T(mozilla::Forward<U>(aU)); |
| } |
| |
| void PopLast() |
| { |
| MOZ_ASSERT(mLength > 0); |
| (*this)[mLength - 1].~T(); |
| mLength--; |
| } |
| |
| uint32_t mLength; |
| |
| // The union ensures that the elements are appropriately aligned. |
| union Storage |
| { |
| char mBuf[sizeof(T) * SegmentCapacity]; |
| mozilla::AlignedElem<MOZ_ALIGNOF(T)> mAlign; |
| } mStorage; |
| |
| static_assert(MOZ_ALIGNOF(T) == MOZ_ALIGNOF(Storage), |
| "SegmentedVector provides incorrect alignment"); |
| }; |
| |
| // See how many we elements we can fit in a segment of IdealSegmentSize. If |
| // IdealSegmentSize is too small, it'll be just one. The +1 is because |
| // kSingleElementSegmentSize already accounts for one element. |
| static const size_t kSingleElementSegmentSize = sizeof(SegmentImpl<1>); |
| static const size_t kSegmentCapacity = |
| kSingleElementSegmentSize <= IdealSegmentSize |
| ? (IdealSegmentSize - kSingleElementSegmentSize) / sizeof(T) + 1 |
| : 1; |
| |
| typedef SegmentImpl<kSegmentCapacity> Segment; |
| |
| public: |
| // The |aIdealSegmentSize| is only for sanity checking. If it's specified, we |
| // check that the actual segment size is as close as possible to it. This |
| // serves as a sanity check for SegmentedVectorCapacity's capacity |
| // computation. |
| explicit SegmentedVector(size_t aIdealSegmentSize = 0) |
| { |
| // The difference between the actual segment size and the ideal segment |
| // size should be less than the size of a single element... unless the |
| // ideal size was too small, in which case the capacity should be one. |
| MOZ_ASSERT_IF( |
| aIdealSegmentSize != 0, |
| (sizeof(Segment) > aIdealSegmentSize && kSegmentCapacity == 1) || |
| aIdealSegmentSize - sizeof(Segment) < sizeof(T)); |
| } |
| |
| ~SegmentedVector() { Clear(); } |
| |
| bool IsEmpty() const { return !mSegments.getFirst(); } |
| |
| // Note that this is O(n) rather than O(1), but the constant factor is very |
| // small because it only has to do one addition per segment. |
| size_t Length() const |
| { |
| size_t n = 0; |
| for (auto segment = mSegments.getFirst(); |
| segment; |
| segment = segment->getNext()) { |
| n += segment->Length(); |
| } |
| return n; |
| } |
| |
| // Returns false if the allocation failed. (If you are using an infallible |
| // allocation policy, use InfallibleAppend() instead.) |
| template<typename U> |
| MOZ_WARN_UNUSED_RESULT bool Append(U&& aU) |
| { |
| Segment* last = mSegments.getLast(); |
| if (!last || last->Length() == kSegmentCapacity) { |
| last = this->template pod_malloc<Segment>(1); |
| if (!last) { |
| return false; |
| } |
| new (last) Segment(); |
| mSegments.insertBack(last); |
| } |
| last->Append(mozilla::Forward<U>(aU)); |
| return true; |
| } |
| |
| // You should probably only use this instead of Append() if you are using an |
| // infallible allocation policy. It will crash if the allocation fails. |
| template<typename U> |
| void InfallibleAppend(U&& aU) |
| { |
| bool ok = Append(mozilla::Forward<U>(aU)); |
| MOZ_RELEASE_ASSERT(ok); |
| } |
| |
| void Clear() |
| { |
| Segment* segment; |
| while ((segment = mSegments.popFirst())) { |
| segment->~Segment(); |
| this->free_(segment); |
| } |
| } |
| |
| T& GetLast() |
| { |
| MOZ_ASSERT(!IsEmpty()); |
| Segment* last = mSegments.getLast(); |
| return (*last)[last->Length() - 1]; |
| } |
| |
| const T& GetLast() const |
| { |
| MOZ_ASSERT(!IsEmpty()); |
| Segment* last = mSegments.getLast(); |
| return (*last)[last->Length() - 1]; |
| } |
| |
| void PopLast() |
| { |
| MOZ_ASSERT(!IsEmpty()); |
| Segment* last = mSegments.getLast(); |
| last->PopLast(); |
| if (!last->Length()) { |
| mSegments.popLast(); |
| last->~Segment(); |
| this->free_(last); |
| } |
| } |
| |
| // Use this class to iterate over a SegmentedVector, like so: |
| // |
| // for (auto iter = v.Iter(); !iter.Done(); iter.Next()) { |
| // MyElem& elem = iter.Get(); |
| // f(elem); |
| // } |
| // |
| class IterImpl |
| { |
| friend class SegmentedVector; |
| |
| Segment* mSegment; |
| size_t mIndex; |
| |
| explicit IterImpl(SegmentedVector* aVector) |
| : mSegment(aVector->mSegments.getFirst()) |
| , mIndex(0) |
| {} |
| |
| public: |
| bool Done() const { return !mSegment; } |
| |
| T& Get() |
| { |
| MOZ_ASSERT(!Done()); |
| return (*mSegment)[mIndex]; |
| } |
| |
| const T& Get() const |
| { |
| MOZ_ASSERT(!Done()); |
| return (*mSegment)[mIndex]; |
| } |
| |
| void Next() |
| { |
| MOZ_ASSERT(!Done()); |
| mIndex++; |
| if (mIndex == mSegment->Length()) { |
| mSegment = mSegment->getNext(); |
| mIndex = 0; |
| } |
| } |
| }; |
| |
| IterImpl Iter() { return IterImpl(this); } |
| |
| // Measure the memory consumption of the vector excluding |this|. Note that |
| // it only measures the vector itself. If the vector elements contain |
| // pointers to other memory blocks, those blocks must be measured separately |
| // during a subsequent iteration over the vector. |
| size_t SizeOfExcludingThis(mozilla::MallocSizeOf aMallocSizeOf) const |
| { |
| return mSegments.sizeOfExcludingThis(aMallocSizeOf); |
| } |
| |
| // Like sizeOfExcludingThis(), but measures |this| as well. |
| size_t SizeOfIncludingThis(mozilla::MallocSizeOf aMallocSizeOf) const |
| { |
| return aMallocSizeOf(this) + SizeOfExcludingThis(aMallocSizeOf); |
| } |
| |
| private: |
| mozilla::LinkedList<Segment> mSegments; |
| }; |
| |
| } // namespace mozilla |
| |
| #endif /* mozilla_SegmentedVector_h */ |