src/starboard/raspi/shared/configuration_public.h - cobalt - Git at Google

 // Copyright 2016 The Cobalt Authors. All Rights Reserved.
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
 //     http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 // See the License for the specific language governing permissions and
 // limitations under the License.

 // The shared Starboard configuration for Raspberry Pi devices.

 #ifndef STARBOARD_RASPI_SHARED_CONFIGURATION_PUBLIC_H_
 #define STARBOARD_RASPI_SHARED_CONFIGURATION_PUBLIC_H_

 // The API version implemented by this platform.
 #define SB_API_VERSION SB_EXPERIMENTAL_API_VERSION

 // --- System Header Configuration -------------------------------------------

 // Any system headers listed here that are not provided by the platform will be
 // emulated in starboard/types.h.

 // Whether the current platform provides the standard header stdarg.h.
 #define SB_HAS_STDARG_H 1

 // Whether the current platform provides the standard header stdbool.h.
 #define SB_HAS_STDBOOL_H 1

 // Whether the current platform provides the standard header stddef.h.
 #define SB_HAS_STDDEF_H 1

 // Whether the current platform provides the standard header stdint.h.
 #define SB_HAS_STDINT_H 1

 // Whether the current platform provides the standard header inttypes.h.
 #define SB_HAS_INTTYPES_H 1

 // Whether the current platform provides the standard header wchar.h.
 #define SB_HAS_WCHAR_H 1

 // Whether the current platform provides the standard header limits.h.
 #define SB_HAS_LIMITS_H 1

 // Whether the current platform provides the standard header float.h.
 #define SB_HAS_FLOAT_H 1

 // Type detection for wchar_t.
 #if defined(__WCHAR_MAX__) && \
     (__WCHAR_MAX__ == 0x7fffffff || __WCHAR_MAX__ == 0xffffffff)
 #define SB_IS_WCHAR_T_UTF32 1
 #elif defined(__WCHAR_MAX__) && \
     (__WCHAR_MAX__ == 0x7fff || __WCHAR_MAX__ == 0xffff)
 #define SB_IS_WCHAR_T_UTF16 1
 #endif

 // Chrome only defines these two if ARMEL or MIPSEL are defined.
 #if defined(__ARMEL__)
 // Chrome has an exclusion for iOS here, we should too when we support iOS.
 #define SB_IS_WCHAR_T_UNSIGNED 1
 #elif defined(__MIPSEL__)
 #define SB_IS_WCHAR_T_SIGNED 1
 #endif

 // --- Attribute Configuration -----------------------------------------------

 // The platform's annotation for forcing a C function to be inlined.
 #define SB_C_FORCE_INLINE __inline__ __attribute__((always_inline))

 // The platform's annotation for marking a C function as suggested to be
 // inlined.
 #define SB_C_INLINE inline

 // The platform's annotation for marking a C function as forcibly not
 // inlined.
 #define SB_C_NOINLINE __attribute__((noinline))

 // The platform's annotation for marking a symbol as exported outside of the
 // current shared library.
 #define SB_EXPORT_PLATFORM __attribute__((visibility("default")))

 // The platform's annotation for marking a symbol as imported from outside of
 // the current linking unit.
 #define SB_IMPORT_PLATFORM

 // --- Extensions Configuration ----------------------------------------------

 // GCC/Clang doesn't define a long long hash function, except for Android and
 // Game consoles.
 #define SB_HAS_LONG_LONG_HASH 0

 // GCC/Clang doesn't define a string hash function, except for Game Consoles.
 #define SB_HAS_STRING_HASH 0

 // Desktop Linux needs a using statement for the hash functions.
 #define SB_HAS_HASH_USING 0

 // Set this to 1 if hash functions for custom types can be defined as a
 // hash_value() function. Otherwise, they need to be placed inside a
 // partially-specified hash struct template with an operator().
 #define SB_HAS_HASH_VALUE 0

 // Set this to 1 if use of hash_map or hash_set causes a deprecation warning
 // (which then breaks the build).
 #define SB_HAS_HASH_WARNING 1

 // The location to include hash_map on this platform.
 #define SB_HASH_MAP_INCLUDE <ext/hash_map>

 // C++'s hash_map and hash_set are often found in different namespaces depending
 // on the compiler.
 #define SB_HASH_NAMESPACE __gnu_cxx

 // The location to include hash_set on this platform.
 #define SB_HASH_SET_INCLUDE <ext/hash_set>

 // Define this to how this platform copies varargs blocks.
 #define SB_VA_COPY(dest, source) va_copy(dest, source)

 // --- Filesystem Configuration ----------------------------------------------

 // The current platform's maximum length of the name of a single directory
 // entry, not including the absolute path.
 #define SB_FILE_MAX_NAME 64

 // The current platform's maximum length of an absolute path.
 #define SB_FILE_MAX_PATH 4096

 // The current platform's maximum number of files that can be opened at the
 // same time by one process.
 #define SB_FILE_MAX_OPEN 256

 // The current platform's file path component separator character. This is the
 // character that appears after a directory in a file path. For example, the
 // absolute canonical path of the file "/path/to/a/file.txt" uses '/' as a path
 // component separator character.
 #define SB_FILE_SEP_CHAR '/'

 // The current platform's alternate file path component separator character.
 // This is like SB_FILE_SEP_CHAR, except if your platform supports an alternate
 // character, then you can place that here. For example, on windows machines,
 // the primary separator character is probably '\', but the alternate is '/'.
 #define SB_FILE_ALT_SEP_CHAR '/'

 // The current platform's search path component separator character. When
 // specifying an ordered list of absolute paths of directories to search for a
 // given reason, this is the character that appears between entries. For
 // example, the search path of "/etc/search/first:/etc/search/second" uses ':'
 // as a search path component separator character.
 #define SB_PATH_SEP_CHAR ':'

 // The string form of SB_FILE_SEP_CHAR.
 #define SB_FILE_SEP_STRING "/"

 // The string form of SB_FILE_ALT_SEP_CHAR.
 #define SB_FILE_ALT_SEP_STRING "/"

 // The string form of SB_PATH_SEP_CHAR.
 #define SB_PATH_SEP_STRING ":"

 // --- Graphics Configuration ------------------------------------------------

 // Specifies whether this platform supports a performant accelerated blitter
 // API. The basic requirement is a scaled, clipped, alpha-blended blit.
 #define SB_HAS_BLITTER 0

 // Specifies the preferred byte order of color channels in a pixel. Refer to
 // starboard/configuration.h for the possible values. EGL/GLES platforms should
 // generally prefer a byte order of RGBA, regardless of endianness.
 #define SB_PREFERRED_RGBA_BYTE_ORDER SB_PREFERRED_RGBA_BYTE_ORDER_RGBA

 // Indicates whether or not the given platform supports bilinear filtering.
 // This can be checked to enable/disable renderer tests that verify that this is
 // working properly.
 #define SB_HAS_BILINEAR_FILTERING_SUPPORT 1

 // Indicates whether or not the given platform supports rendering of NV12
 // textures. These textures typically originate from video decoders.
 #define SB_HAS_NV12_TEXTURE_SUPPORT 1

 // Whether the current platform should frequently flip their display buffer.
 // If this is not required (e.g. SB_MUST_FREQUENTLY_FLIP_DISPLAY_BUFFER is set
 // to 0), then optimizations where the display buffer is not flipped if the
 // scene hasn't changed are enabled.
 #define SB_MUST_FREQUENTLY_FLIP_DISPLAY_BUFFER 0

 // --- I/O Configuration -----------------------------------------------------

 // Whether the current platform has microphone supported.
 #define SB_HAS_MICROPHONE 0

 // Whether the current platform implements the on screen keyboard interface.
 #define SB_HAS_ON_SCREEN_KEYBOARD 0

 // Whether the current platform has speech recognizer.
 #define SB_HAS_SPEECH_RECOGNIZER 0

 // Whether the current platform has speech synthesis.
 #define SB_HAS_SPEECH_SYNTHESIS 0

 // --- Media Configuration ---------------------------------------------------

 // Whether the current platform uses a media player that relies on a URL.
 #define SB_HAS_PLAYER_WITH_URL 0

 // The maximum audio bitrate the platform can decode.  The following value
 // equals to 5M bytes per seconds which is more than enough for compressed
 // audio.
 #define SB_MEDIA_MAX_AUDIO_BITRATE_IN_BITS_PER_SECOND (40 * 1024 * 1024)

 // The maximum video bitrate the platform can decode.  The following value
 // equals to 25M bytes per seconds which is more than enough for compressed
 // video.
 #define SB_MEDIA_MAX_VIDEO_BITRATE_IN_BITS_PER_SECOND (200 * 1024 * 1024)

 // Specifies whether this platform has webm/vp9 support.  This should be set to
 // non-zero on platforms with webm/vp9 support.
 #define SB_HAS_MEDIA_WEBM_VP9_SUPPORT 0

 // Specifies whether this platform updates audio frames asynchronously.  In such
 // case an extra parameter will be added to |SbAudioSinkConsumeFramesFunc| to
 // indicate the absolute time that the consumed audio frames are reported.
 // Check document for |SbAudioSinkConsumeFramesFunc| in audio_sink.h for more
 // details.
 #define SB_HAS_ASYNC_AUDIO_FRAMES_REPORTING 0

 // Specifies the stack size for threads created inside media stack.  Set to 0 to
 // use the default thread stack size.  Set to non-zero to explicitly set the
 // stack size for media stack threads.
 #define SB_MEDIA_THREAD_STACK_SIZE 0U

 // --- Decoder-only Params ---

 // Specifies how media buffers must be aligned on this platform as some
 // decoders may have special requirement on the alignment of buffers being
 // decoded.
 #define SB_MEDIA_BUFFER_ALIGNMENT 128U

 // Specifies how video frame buffers must be aligned on this platform.
 #define SB_MEDIA_VIDEO_FRAME_ALIGNMENT 256U

 // The encoded video frames are compressed in different ways, their decoding
 // time can vary a lot.  Occasionally a single frame can take longer time to
 // decode than the average time per frame.  The player has to cache some frames
 // to account for such inconsistency.  The number of frames being cached are
 // controlled by the following two macros.
 //
 // Specify the number of video frames to be cached before the playback starts.
 // Note that set this value too large may increase the playback start delay.
 #define SB_MEDIA_MAXIMUM_VIDEO_PREROLL_FRAMES 4

 // Specify the number of video frames to be cached during playback.  A large
 // value leads to more stable fps but also causes the app to use more memory.
 #define SB_MEDIA_MAXIMUM_VIDEO_FRAMES 12

 // --- Memory Configuration --------------------------------------------------

 // The memory page size, which controls the size of chunks on memory that
 // allocators deal with, and the alignment of those chunks. This doesn't have to
 // be the hardware-defined physical page size, but it should be a multiple of
 // it.
 #define SB_MEMORY_PAGE_SIZE 4096

 // Whether this platform has and should use an MMAP function to map physical
 // memory to the virtual address space.
 #define SB_HAS_MMAP 1

 // Whether this platform can map executable memory. Implies SB_HAS_MMAP. This is
 // required for platforms that want to JIT.
 #define SB_CAN_MAP_EXECUTABLE_MEMORY 1

 // Whether this platform has and should use an growable heap (e.g. with sbrk())
 // to map physical memory to the virtual address space.
 #define SB_HAS_VIRTUAL_REGIONS 0

 // Specifies the alignment for IO Buffers, in bytes. Some low-level network APIs
 // may require buffers to have a specific alignment, and this is the place to
 // specify that.
 #define SB_NETWORK_IO_BUFFER_ALIGNMENT 16

 // Determines the alignment that allocations should have on this platform.
 #define SB_MALLOC_ALIGNMENT ((size_t)16U)

 // Determines the threshhold of allocation size that should be done with mmap
 // (if available), rather than allocated within the core heap.
 #define SB_DEFAULT_MMAP_THRESHOLD ((size_t)(256 * 1024U))

 // Defines the path where memory debugging logs should be written to.
 #define SB_MEMORY_LOG_PATH "/tmp/starboard"

 // The Raspberry Pi does not apparently align fields in a heap-allocated struct
 // by over 16 bytes.
 #define SB_HAS_QUIRK_DOES_NOT_ALIGN_FIELDS_IN_HEAP_OVER_16_BYTES 1

 // The Raspberry Pi does not apparently align stack variables by over 16 bytes.
 #define SB_HAS_QUIRK_DOES_NOT_STACK_ALIGN_OVER_16_BYTES 1

 // --- Network Configuration -------------------------------------------------

 // Specifies whether this platform supports IPV6.
 #define SB_HAS_IPV6 1

 // Specifies whether this platform supports pipe.
 #define SB_HAS_PIPE 1

 // --- Thread Configuration --------------------------------------------------

 // On the current version of Raspbian, real time thread scheduling seems to be
 // broken in that higher priority threads do not always have priority over lower
 // priority threads.  It looks like the thread created last will always have the
 // highest priority.
 #define SB_HAS_THREAD_PRIORITY_SUPPORT 1

 // Defines the maximum number of simultaneous threads for this platform. Some
 // platforms require sharing thread handles with other kinds of system handles,
 // like mutexes, so we want to keep this managable.
 #define SB_MAX_THREADS 90

 // The maximum number of thread local storage keys supported by this platform.
 #define SB_MAX_THREAD_LOCAL_KEYS 512

 // The maximum length of the name for a thread, including the NULL-terminator.
 #define SB_MAX_THREAD_NAME_LENGTH 16

 // --- Timing API ------------------------------------------------------------

 // Whether this platform has an API to retrieve how long the current thread
 // has spent in the executing state.
 #define SB_HAS_TIME_THREAD_NOW 1

 // --- Tuneable Parameters ---------------------------------------------------

 // Specifies the network receive buffer size in bytes, set via
 // SbSocketSetReceiveBufferSize().
 //
 // Setting this to 0 indicates that SbSocketSetReceiveBufferSize() should
 // not be called. Use this for OSs (such as Linux) where receive buffer
 // auto-tuning is better.
 //
 // On some platforms, this may affect max TCP window size which may
 // dramatically affect throughput in the presence of latency.
 //
 // If your platform does not have a good TCP auto-tuning mechanism,
 // a setting of (128 * 1024) here is recommended.
 #define SB_NETWORK_RECEIVE_BUFFER_SIZE (0)

 // --- User Configuration ----------------------------------------------------

 // The maximum number of users that can be signed in at the same time.
 #define SB_USER_MAX_SIGNED_IN 1

 // --- Platform Specific Audits ----------------------------------------------

 #if !defined(__GNUC__)
 #error "RasPi builds need a GCC-like compiler (for the moment)."
 #endif

 #endif  // STARBOARD_RASPI_SHARED_CONFIGURATION_PUBLIC_H_
	// Copyright 2016 The Cobalt Authors. All Rights Reserved.
	//
	// Licensed under the Apache License, Version 2.0 (the "License");
	// you may not use this file except in compliance with the License.
	// You may obtain a copy of the License at
	//
	// http://www.apache.org/licenses/LICENSE-2.0
	//
	// Unless required by applicable law or agreed to in writing, software
	// distributed under the License is distributed on an "AS IS" BASIS,
	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	// See the License for the specific language governing permissions and
	// limitations under the License.

	// The shared Starboard configuration for Raspberry Pi devices.

	#ifndef STARBOARD_RASPI_SHARED_CONFIGURATION_PUBLIC_H_
	#define STARBOARD_RASPI_SHARED_CONFIGURATION_PUBLIC_H_

	// The API version implemented by this platform.
	#define SB_API_VERSION SB_EXPERIMENTAL_API_VERSION

	// --- System Header Configuration -------------------------------------------

	// Any system headers listed here that are not provided by the platform will be
	// emulated in starboard/types.h.

	// Whether the current platform provides the standard header stdarg.h.
	#define SB_HAS_STDARG_H 1

	// Whether the current platform provides the standard header stdbool.h.
	#define SB_HAS_STDBOOL_H 1

	// Whether the current platform provides the standard header stddef.h.
	#define SB_HAS_STDDEF_H 1

	// Whether the current platform provides the standard header stdint.h.
	#define SB_HAS_STDINT_H 1

	// Whether the current platform provides the standard header inttypes.h.
	#define SB_HAS_INTTYPES_H 1

	// Whether the current platform provides the standard header wchar.h.
	#define SB_HAS_WCHAR_H 1

	// Whether the current platform provides the standard header limits.h.
	#define SB_HAS_LIMITS_H 1

	// Whether the current platform provides the standard header float.h.
	#define SB_HAS_FLOAT_H 1

	// Type detection for wchar_t.
	#if defined(__WCHAR_MAX__) && \
	(__WCHAR_MAX__ == 0x7fffffff \|\| __WCHAR_MAX__ == 0xffffffff)
	#define SB_IS_WCHAR_T_UTF32 1
	#elif defined(__WCHAR_MAX__) && \
	(__WCHAR_MAX__ == 0x7fff \|\| __WCHAR_MAX__ == 0xffff)
	#define SB_IS_WCHAR_T_UTF16 1
	#endif

	// Chrome only defines these two if ARMEL or MIPSEL are defined.
	#if defined(__ARMEL__)
	// Chrome has an exclusion for iOS here, we should too when we support iOS.
	#define SB_IS_WCHAR_T_UNSIGNED 1
	#elif defined(__MIPSEL__)
	#define SB_IS_WCHAR_T_SIGNED 1
	#endif

	// --- Attribute Configuration -----------------------------------------------

	// The platform's annotation for forcing a C function to be inlined.
	#define SB_C_FORCE_INLINE __inline__ __attribute__((always_inline))

	// The platform's annotation for marking a C function as suggested to be
	// inlined.
	#define SB_C_INLINE inline

	// The platform's annotation for marking a C function as forcibly not
	// inlined.
	#define SB_C_NOINLINE __attribute__((noinline))

	// The platform's annotation for marking a symbol as exported outside of the
	// current shared library.
	#define SB_EXPORT_PLATFORM __attribute__((visibility("default")))

	// The platform's annotation for marking a symbol as imported from outside of
	// the current linking unit.
	#define SB_IMPORT_PLATFORM

	// --- Extensions Configuration ----------------------------------------------

	// GCC/Clang doesn't define a long long hash function, except for Android and
	// Game consoles.
	#define SB_HAS_LONG_LONG_HASH 0

	// GCC/Clang doesn't define a string hash function, except for Game Consoles.
	#define SB_HAS_STRING_HASH 0

	// Desktop Linux needs a using statement for the hash functions.
	#define SB_HAS_HASH_USING 0

	// Set this to 1 if hash functions for custom types can be defined as a
	// hash_value() function. Otherwise, they need to be placed inside a
	// partially-specified hash struct template with an operator().
	#define SB_HAS_HASH_VALUE 0

	// Set this to 1 if use of hash_map or hash_set causes a deprecation warning
	// (which then breaks the build).
	#define SB_HAS_HASH_WARNING 1

	// The location to include hash_map on this platform.
	#define SB_HASH_MAP_INCLUDE <ext/hash_map>

	// C++'s hash_map and hash_set are often found in different namespaces depending
	// on the compiler.
	#define SB_HASH_NAMESPACE __gnu_cxx

	// The location to include hash_set on this platform.
	#define SB_HASH_SET_INCLUDE <ext/hash_set>

	// Define this to how this platform copies varargs blocks.
	#define SB_VA_COPY(dest, source) va_copy(dest, source)

	// --- Filesystem Configuration ----------------------------------------------

	// The current platform's maximum length of the name of a single directory
	// entry, not including the absolute path.
	#define SB_FILE_MAX_NAME 64

	// The current platform's maximum length of an absolute path.
	#define SB_FILE_MAX_PATH 4096

	// The current platform's maximum number of files that can be opened at the
	// same time by one process.
	#define SB_FILE_MAX_OPEN 256

	// The current platform's file path component separator character. This is the
	// character that appears after a directory in a file path. For example, the
	// absolute canonical path of the file "/path/to/a/file.txt" uses '/' as a path
	// component separator character.
	#define SB_FILE_SEP_CHAR '/'

	// The current platform's alternate file path component separator character.
	// This is like SB_FILE_SEP_CHAR, except if your platform supports an alternate
	// character, then you can place that here. For example, on windows machines,
	// the primary separator character is probably '\', but the alternate is '/'.
	#define SB_FILE_ALT_SEP_CHAR '/'

	// The current platform's search path component separator character. When
	// specifying an ordered list of absolute paths of directories to search for a
	// given reason, this is the character that appears between entries. For
	// example, the search path of "/etc/search/first:/etc/search/second" uses ':'
	// as a search path component separator character.
	#define SB_PATH_SEP_CHAR ':'

	// The string form of SB_FILE_SEP_CHAR.
	#define SB_FILE_SEP_STRING "/"

	// The string form of SB_FILE_ALT_SEP_CHAR.
	#define SB_FILE_ALT_SEP_STRING "/"

	// The string form of SB_PATH_SEP_CHAR.
	#define SB_PATH_SEP_STRING ":"

	// --- Graphics Configuration ------------------------------------------------

	// Specifies whether this platform supports a performant accelerated blitter
	// API. The basic requirement is a scaled, clipped, alpha-blended blit.
	#define SB_HAS_BLITTER 0

	// Specifies the preferred byte order of color channels in a pixel. Refer to
	// starboard/configuration.h for the possible values. EGL/GLES platforms should
	// generally prefer a byte order of RGBA, regardless of endianness.
	#define SB_PREFERRED_RGBA_BYTE_ORDER SB_PREFERRED_RGBA_BYTE_ORDER_RGBA

	// Indicates whether or not the given platform supports bilinear filtering.
	// This can be checked to enable/disable renderer tests that verify that this is
	// working properly.
	#define SB_HAS_BILINEAR_FILTERING_SUPPORT 1

	// Indicates whether or not the given platform supports rendering of NV12
	// textures. These textures typically originate from video decoders.
	#define SB_HAS_NV12_TEXTURE_SUPPORT 1

	// Whether the current platform should frequently flip their display buffer.
	// If this is not required (e.g. SB_MUST_FREQUENTLY_FLIP_DISPLAY_BUFFER is set
	// to 0), then optimizations where the display buffer is not flipped if the
	// scene hasn't changed are enabled.
	#define SB_MUST_FREQUENTLY_FLIP_DISPLAY_BUFFER 0

	// --- I/O Configuration -----------------------------------------------------

	// Whether the current platform has microphone supported.
	#define SB_HAS_MICROPHONE 0

	// Whether the current platform implements the on screen keyboard interface.
	#define SB_HAS_ON_SCREEN_KEYBOARD 0

	// Whether the current platform has speech recognizer.
	#define SB_HAS_SPEECH_RECOGNIZER 0

	// Whether the current platform has speech synthesis.
	#define SB_HAS_SPEECH_SYNTHESIS 0

	// --- Media Configuration ---------------------------------------------------

	// Whether the current platform uses a media player that relies on a URL.
	#define SB_HAS_PLAYER_WITH_URL 0

	// The maximum audio bitrate the platform can decode. The following value
	// equals to 5M bytes per seconds which is more than enough for compressed
	// audio.
	#define SB_MEDIA_MAX_AUDIO_BITRATE_IN_BITS_PER_SECOND (40 * 1024 * 1024)

	// The maximum video bitrate the platform can decode. The following value
	// equals to 25M bytes per seconds which is more than enough for compressed
	// video.
	#define SB_MEDIA_MAX_VIDEO_BITRATE_IN_BITS_PER_SECOND (200 * 1024 * 1024)

	// Specifies whether this platform has webm/vp9 support. This should be set to
	// non-zero on platforms with webm/vp9 support.
	#define SB_HAS_MEDIA_WEBM_VP9_SUPPORT 0

	// Specifies whether this platform updates audio frames asynchronously. In such
	// case an extra parameter will be added to \|SbAudioSinkConsumeFramesFunc\| to
	// indicate the absolute time that the consumed audio frames are reported.
	// Check document for \|SbAudioSinkConsumeFramesFunc\| in audio_sink.h for more
	// details.
	#define SB_HAS_ASYNC_AUDIO_FRAMES_REPORTING 0

	// Specifies the stack size for threads created inside media stack. Set to 0 to
	// use the default thread stack size. Set to non-zero to explicitly set the
	// stack size for media stack threads.
	#define SB_MEDIA_THREAD_STACK_SIZE 0U

	// --- Decoder-only Params ---

	// Specifies how media buffers must be aligned on this platform as some
	// decoders may have special requirement on the alignment of buffers being
	// decoded.
	#define SB_MEDIA_BUFFER_ALIGNMENT 128U

	// Specifies how video frame buffers must be aligned on this platform.
	#define SB_MEDIA_VIDEO_FRAME_ALIGNMENT 256U

	// The encoded video frames are compressed in different ways, their decoding
	// time can vary a lot. Occasionally a single frame can take longer time to
	// decode than the average time per frame. The player has to cache some frames
	// to account for such inconsistency. The number of frames being cached are
	// controlled by the following two macros.
	//
	// Specify the number of video frames to be cached before the playback starts.
	// Note that set this value too large may increase the playback start delay.
	#define SB_MEDIA_MAXIMUM_VIDEO_PREROLL_FRAMES 4

	// Specify the number of video frames to be cached during playback. A large
	// value leads to more stable fps but also causes the app to use more memory.
	#define SB_MEDIA_MAXIMUM_VIDEO_FRAMES 12

	// --- Memory Configuration --------------------------------------------------

	// The memory page size, which controls the size of chunks on memory that
	// allocators deal with, and the alignment of those chunks. This doesn't have to
	// be the hardware-defined physical page size, but it should be a multiple of
	// it.
	#define SB_MEMORY_PAGE_SIZE 4096

	// Whether this platform has and should use an MMAP function to map physical
	// memory to the virtual address space.
	#define SB_HAS_MMAP 1

	// Whether this platform can map executable memory. Implies SB_HAS_MMAP. This is
	// required for platforms that want to JIT.
	#define SB_CAN_MAP_EXECUTABLE_MEMORY 1

	// Whether this platform has and should use an growable heap (e.g. with sbrk())
	// to map physical memory to the virtual address space.
	#define SB_HAS_VIRTUAL_REGIONS 0

	// Specifies the alignment for IO Buffers, in bytes. Some low-level network APIs
	// may require buffers to have a specific alignment, and this is the place to
	// specify that.
	#define SB_NETWORK_IO_BUFFER_ALIGNMENT 16

	// Determines the alignment that allocations should have on this platform.
	#define SB_MALLOC_ALIGNMENT ((size_t)16U)

	// Determines the threshhold of allocation size that should be done with mmap
	// (if available), rather than allocated within the core heap.
	#define SB_DEFAULT_MMAP_THRESHOLD ((size_t)(256 * 1024U))

	// Defines the path where memory debugging logs should be written to.
	#define SB_MEMORY_LOG_PATH "/tmp/starboard"

	// The Raspberry Pi does not apparently align fields in a heap-allocated struct
	// by over 16 bytes.
	#define SB_HAS_QUIRK_DOES_NOT_ALIGN_FIELDS_IN_HEAP_OVER_16_BYTES 1

	// The Raspberry Pi does not apparently align stack variables by over 16 bytes.
	#define SB_HAS_QUIRK_DOES_NOT_STACK_ALIGN_OVER_16_BYTES 1

	// --- Network Configuration -------------------------------------------------

	// Specifies whether this platform supports IPV6.
	#define SB_HAS_IPV6 1

	// Specifies whether this platform supports pipe.
	#define SB_HAS_PIPE 1

	// --- Thread Configuration --------------------------------------------------

	// On the current version of Raspbian, real time thread scheduling seems to be
	// broken in that higher priority threads do not always have priority over lower
	// priority threads. It looks like the thread created last will always have the
	// highest priority.
	#define SB_HAS_THREAD_PRIORITY_SUPPORT 1

	// Defines the maximum number of simultaneous threads for this platform. Some
	// platforms require sharing thread handles with other kinds of system handles,
	// like mutexes, so we want to keep this managable.
	#define SB_MAX_THREADS 90

	// The maximum number of thread local storage keys supported by this platform.
	#define SB_MAX_THREAD_LOCAL_KEYS 512

	// The maximum length of the name for a thread, including the NULL-terminator.
	#define SB_MAX_THREAD_NAME_LENGTH 16

	// --- Timing API ------------------------------------------------------------

	// Whether this platform has an API to retrieve how long the current thread
	// has spent in the executing state.
	#define SB_HAS_TIME_THREAD_NOW 1

	// --- Tuneable Parameters ---------------------------------------------------

	// Specifies the network receive buffer size in bytes, set via
	// SbSocketSetReceiveBufferSize().
	//
	// Setting this to 0 indicates that SbSocketSetReceiveBufferSize() should
	// not be called. Use this for OSs (such as Linux) where receive buffer
	// auto-tuning is better.
	//
	// On some platforms, this may affect max TCP window size which may
	// dramatically affect throughput in the presence of latency.
	//
	// If your platform does not have a good TCP auto-tuning mechanism,
	// a setting of (128 * 1024) here is recommended.
	#define SB_NETWORK_RECEIVE_BUFFER_SIZE (0)

	// --- User Configuration ----------------------------------------------------

	// The maximum number of users that can be signed in at the same time.
	#define SB_USER_MAX_SIGNED_IN 1

	// --- Platform Specific Audits ----------------------------------------------

	#if !defined(__GNUC__)
	#error "RasPi builds need a GCC-like compiler (for the moment)."
	#endif

	#endif // STARBOARD_RASPI_SHARED_CONFIGURATION_PUBLIC_H_