src/net/base/mock_host_resolver.h

// Copyright (c) 2011 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#ifndef NET_BASE_MOCK_HOST_RESOLVER_H_
#define NET_BASE_MOCK_HOST_RESOLVER_H_

#include <list>
#include <map>

#include "base/memory/weak_ptr.h"
#include "base/synchronization/waitable_event.h"
#include "base/threading/non_thread_safe.h"
#include "net/base/host_resolver.h"
#include "net/base/host_resolver_proc.h"

namespace net {

class HostCache;
class RuleBasedHostResolverProc;

// Fills |*addrlist| with a socket address for |host_list| which should be a
// comma-separated list of IPv4 or IPv6 literal(s) without enclosing brackets.
// If |canonical_name| is non-empty it is used as the DNS canonical name for
// the host. Returns OK on success, ERR_UNEXPECTED otherwise.
int ParseAddressList(const std::string& host_list,
                     const std::string& canonical_name,
                     AddressList* addrlist);

// In most cases, it is important that unit tests avoid relying on making actual
// DNS queries since the resulting tests can be flaky, especially if the network
// is unreliable for some reason.  To simplify writing tests that avoid making
// actual DNS queries, pass a MockHostResolver as the HostResolver dependency.
// The socket addresses returned can be configured using the
// RuleBasedHostResolverProc:
//
//   host_resolver->rules()->AddRule("foo.com", "1.2.3.4");
//   host_resolver->rules()->AddRule("bar.com", "2.3.4.5");
//
// The above rules define a static mapping from hostnames to IP address
// literals.  The first parameter to AddRule specifies a host pattern to match
// against, and the second parameter indicates what value should be used to
// replace the given hostname.  So, the following is also supported:
//
//   host_mapper->AddRule("*.com", "127.0.0.1");
//
// Replacement doesn't have to be string representing an IP address. It can
// re-map one hostname to another as well.
//
// By default, MockHostResolvers include a single rule that maps all hosts to
// 127.0.0.1.

// Base class shared by MockHostResolver and MockCachingHostResolver.
class MockHostResolverBase : public HostResolver,
                             public base::SupportsWeakPtr<MockHostResolverBase>,
                             public base::NonThreadSafe {
 public:
  virtual ~MockHostResolverBase();

  RuleBasedHostResolverProc* rules() { return rules_; }
  void set_rules(RuleBasedHostResolverProc* rules) { rules_ = rules; }

  // Controls whether resolutions complete synchronously or asynchronously.
  void set_synchronous_mode(bool is_synchronous) {
    synchronous_mode_ = is_synchronous;
  }

  // Asynchronous requests are automatically resolved by default.
  // If set_ondemand_mode() is set then Resolve() returns IO_PENDING and
  // ResolveAllPending() must be explicitly invoked to resolve all requests
  // that are pending.
  void set_ondemand_mode(bool is_ondemand) {
    ondemand_mode_ = is_ondemand;
  }

  // HostResolver methods:
  virtual int Resolve(const RequestInfo& info,
                      AddressList* addresses,
                      const CompletionCallback& callback,
                      RequestHandle* out_req,
                      const BoundNetLog& net_log) OVERRIDE;
  virtual int ResolveFromCache(const RequestInfo& info,
                               AddressList* addresses,
                               const BoundNetLog& net_log) OVERRIDE;
  virtual void CancelRequest(RequestHandle req) OVERRIDE;
  virtual HostCache* GetHostCache() OVERRIDE;

  // Resolves all pending requests. It is only valid to invoke this if
  // set_ondemand_mode was set before. The requests are resolved asynchronously,
  // after this call returns.
  void ResolveAllPending();

  // Returns true if there are pending requests that can be resolved by invoking
  // ResolveAllPending().
  bool has_pending_requests() const { return !requests_.empty(); }

 protected:
  explicit MockHostResolverBase(bool use_caching);

 private:
  struct Request;
  typedef std::map<size_t, Request*> RequestMap;

  // Resolve as IP or from |cache_| return cached error or
  // DNS_CACHE_MISS if failed.
  int ResolveFromIPLiteralOrCache(const RequestInfo& info,
                                  AddressList* addresses);
  // Resolve via |proc_|.
  int ResolveProc(size_t id, const RequestInfo& info, AddressList* addresses);
  // Resolve request stored in |requests_|. Pass rv to callback.
  void ResolveNow(size_t id);

  bool synchronous_mode_;
  bool ondemand_mode_;
  scoped_refptr<RuleBasedHostResolverProc> rules_;
  scoped_ptr<HostCache> cache_;
  RequestMap requests_;
  size_t next_request_id_;

  DISALLOW_COPY_AND_ASSIGN(MockHostResolverBase);
};

class MockHostResolver : public MockHostResolverBase {
 public:
  MockHostResolver() : MockHostResolverBase(false /*use_caching*/) {}
  virtual ~MockHostResolver() {}
};

// Same as MockHostResolver, except internally it uses a host-cache.
//
// Note that tests are advised to use MockHostResolver instead, since it is
// more predictable. (MockHostResolver also can be put into synchronous
// operation mode in case that is what you needed from the caching version).
class MockCachingHostResolver : public MockHostResolverBase {
 public:
  MockCachingHostResolver() : MockHostResolverBase(true /*use_caching*/) {}
  virtual ~MockCachingHostResolver() {}
};

// RuleBasedHostResolverProc applies a set of rules to map a host string to
// a replacement host string. It then uses the system host resolver to return
// a socket address. Generally the replacement should be an IPv4 literal so
// there is no network dependency.
class RuleBasedHostResolverProc : public HostResolverProc {
 public:
  explicit RuleBasedHostResolverProc(HostResolverProc* previous);

  // Any hostname matching the given pattern will be replaced with the given
  // replacement value.  Usually, replacement should be an IP address literal.
  void AddRule(const std::string& host_pattern,
               const std::string& replacement);

  // Same as AddRule(), but further restricts to |address_family|.
  void AddRuleForAddressFamily(const std::string& host_pattern,
                               AddressFamily address_family,
                               const std::string& replacement);

  // Same as AddRule(), but the replacement is expected to be an IPv4 or IPv6
  // literal. This can be used in place of AddRule() to bypass the system's
  // host resolver (the address list will be constructed manually).
  // If |canonical-name| is non-empty, it is copied to the resulting AddressList
  // but does not impact DNS resolution.
  void AddIPLiteralRule(const std::string& host_pattern,
                        const std::string& ip_literal,
                        const std::string& canonical_name);

  void AddRuleWithLatency(const std::string& host_pattern,
                          const std::string& replacement,
                          int latency_ms);

  // Make sure that |host| will not be re-mapped or even processed by underlying
  // host resolver procedures. It can also be a pattern.
  void AllowDirectLookup(const std::string& host);

  // Simulate a lookup failure for |host| (it also can be a pattern).
  void AddSimulatedFailure(const std::string& host);

  // HostResolverProc methods:
  virtual int Resolve(const std::string& host,
                      AddressFamily address_family,
                      HostResolverFlags host_resolver_flags,
                      AddressList* addrlist,
                      int* os_error) OVERRIDE;

 private:
  struct Rule;
  typedef std::list<Rule> RuleList;

  virtual ~RuleBasedHostResolverProc();

  RuleList rules_;
};

// Create rules that map all requests to localhost.
RuleBasedHostResolverProc* CreateCatchAllHostResolverProc();

// HangingHostResolver never completes its |Resolve| request.
class HangingHostResolver : public HostResolver {
 public:
  virtual int Resolve(const RequestInfo& info,
                      AddressList* addresses,
                      const CompletionCallback& callback,
                      RequestHandle* out_req,
                      const BoundNetLog& net_log) OVERRIDE;
  virtual int ResolveFromCache(const RequestInfo& info,
                               AddressList* addresses,
                               const BoundNetLog& net_log) OVERRIDE;
  virtual void CancelRequest(RequestHandle req) OVERRIDE {}
};

// This class sets the default HostResolverProc for a particular scope.  The
// chain of resolver procs starting at |proc| is placed in front of any existing
// default resolver proc(s).  This means that if multiple
// ScopedDefaultHostResolverProcs are declared, then resolving will start with
// the procs given to the last-allocated one, then fall back to the procs given
// to the previously-allocated one, and so forth.
//
// NOTE: Only use this as a catch-all safety net. Individual tests should use
// MockHostResolver.
class ScopedDefaultHostResolverProc {
 public:
  ScopedDefaultHostResolverProc();
  explicit ScopedDefaultHostResolverProc(HostResolverProc* proc);

  ~ScopedDefaultHostResolverProc();

  void Init(HostResolverProc* proc);

 private:
  scoped_refptr<HostResolverProc> current_proc_;
  scoped_refptr<HostResolverProc> previous_proc_;
};

}  // namespace net

#endif  // NET_BASE_MOCK_HOST_RESOLVER_H_