| //===- llvm/unittest/Support/AllocatorTest.cpp - BumpPtrAllocator tests ---===// | |
| // | |
| // The LLVM Compiler Infrastructure | |
| // | |
| // This file is distributed under the University of Illinois Open Source | |
| // License. See LICENSE.TXT for details. | |
| // | |
| //===----------------------------------------------------------------------===// | |
| #include "llvm/Support/Allocator.h" | |
| #include "gtest/gtest.h" | |
| #include <cstdlib> | |
| using namespace llvm; | |
| namespace { | |
| TEST(AllocatorTest, Basics) { | |
| BumpPtrAllocator Alloc; | |
| int *a = (int*)Alloc.Allocate(sizeof(int), alignof(int)); | |
| int *b = (int*)Alloc.Allocate(sizeof(int) * 10, alignof(int)); | |
| int *c = (int*)Alloc.Allocate(sizeof(int), alignof(int)); | |
| *a = 1; | |
| b[0] = 2; | |
| b[9] = 2; | |
| *c = 3; | |
| EXPECT_EQ(1, *a); | |
| EXPECT_EQ(2, b[0]); | |
| EXPECT_EQ(2, b[9]); | |
| EXPECT_EQ(3, *c); | |
| EXPECT_EQ(1U, Alloc.GetNumSlabs()); | |
| BumpPtrAllocator Alloc2 = std::move(Alloc); | |
| EXPECT_EQ(0U, Alloc.GetNumSlabs()); | |
| EXPECT_EQ(1U, Alloc2.GetNumSlabs()); | |
| // Make sure the old pointers still work. These are especially interesting | |
| // under ASan or Valgrind. | |
| EXPECT_EQ(1, *a); | |
| EXPECT_EQ(2, b[0]); | |
| EXPECT_EQ(2, b[9]); | |
| EXPECT_EQ(3, *c); | |
| Alloc = std::move(Alloc2); | |
| EXPECT_EQ(0U, Alloc2.GetNumSlabs()); | |
| EXPECT_EQ(1U, Alloc.GetNumSlabs()); | |
| } | |
| // Allocate enough bytes to create three slabs. | |
| TEST(AllocatorTest, ThreeSlabs) { | |
| BumpPtrAllocator Alloc; | |
| Alloc.Allocate(3000, 1); | |
| EXPECT_EQ(1U, Alloc.GetNumSlabs()); | |
| Alloc.Allocate(3000, 1); | |
| EXPECT_EQ(2U, Alloc.GetNumSlabs()); | |
| Alloc.Allocate(3000, 1); | |
| EXPECT_EQ(3U, Alloc.GetNumSlabs()); | |
| } | |
| // Allocate enough bytes to create two slabs, reset the allocator, and do it | |
| // again. | |
| TEST(AllocatorTest, TestReset) { | |
| BumpPtrAllocator Alloc; | |
| // Allocate something larger than the SizeThreshold=4096. | |
| (void)Alloc.Allocate(5000, 1); | |
| Alloc.Reset(); | |
| // Calling Reset should free all CustomSizedSlabs. | |
| EXPECT_EQ(0u, Alloc.GetNumSlabs()); | |
| Alloc.Allocate(3000, 1); | |
| EXPECT_EQ(1U, Alloc.GetNumSlabs()); | |
| Alloc.Allocate(3000, 1); | |
| EXPECT_EQ(2U, Alloc.GetNumSlabs()); | |
| Alloc.Reset(); | |
| EXPECT_EQ(1U, Alloc.GetNumSlabs()); | |
| Alloc.Allocate(3000, 1); | |
| EXPECT_EQ(1U, Alloc.GetNumSlabs()); | |
| Alloc.Allocate(3000, 1); | |
| EXPECT_EQ(2U, Alloc.GetNumSlabs()); | |
| } | |
| // Test some allocations at varying alignments. | |
| TEST(AllocatorTest, TestAlignment) { | |
| BumpPtrAllocator Alloc; | |
| uintptr_t a; | |
| a = (uintptr_t)Alloc.Allocate(1, 2); | |
| EXPECT_EQ(0U, a & 1); | |
| a = (uintptr_t)Alloc.Allocate(1, 4); | |
| EXPECT_EQ(0U, a & 3); | |
| a = (uintptr_t)Alloc.Allocate(1, 8); | |
| EXPECT_EQ(0U, a & 7); | |
| a = (uintptr_t)Alloc.Allocate(1, 16); | |
| EXPECT_EQ(0U, a & 15); | |
| a = (uintptr_t)Alloc.Allocate(1, 32); | |
| EXPECT_EQ(0U, a & 31); | |
| a = (uintptr_t)Alloc.Allocate(1, 64); | |
| EXPECT_EQ(0U, a & 63); | |
| a = (uintptr_t)Alloc.Allocate(1, 128); | |
| EXPECT_EQ(0U, a & 127); | |
| } | |
| // Test allocating just over the slab size. This tests a bug where before the | |
| // allocator incorrectly calculated the buffer end pointer. | |
| TEST(AllocatorTest, TestOverflow) { | |
| BumpPtrAllocator Alloc; | |
| // Fill the slab right up until the end pointer. | |
| Alloc.Allocate(4096, 1); | |
| EXPECT_EQ(1U, Alloc.GetNumSlabs()); | |
| // If we don't allocate a new slab, then we will have overflowed. | |
| Alloc.Allocate(1, 1); | |
| EXPECT_EQ(2U, Alloc.GetNumSlabs()); | |
| } | |
| // Test allocating with a size larger than the initial slab size. | |
| TEST(AllocatorTest, TestSmallSlabSize) { | |
| BumpPtrAllocator Alloc; | |
| Alloc.Allocate(8000, 1); | |
| EXPECT_EQ(1U, Alloc.GetNumSlabs()); | |
| } | |
| // Test requesting alignment that goes past the end of the current slab. | |
| TEST(AllocatorTest, TestAlignmentPastSlab) { | |
| BumpPtrAllocator Alloc; | |
| Alloc.Allocate(4095, 1); | |
| // Aligning the current slab pointer is likely to move it past the end of the | |
| // slab, which would confuse any unsigned comparisons with the difference of | |
| // the end pointer and the aligned pointer. | |
| Alloc.Allocate(1024, 8192); | |
| EXPECT_EQ(2U, Alloc.GetNumSlabs()); | |
| } | |
| // Mock slab allocator that returns slabs aligned on 4096 bytes. There is no | |
| // easy portable way to do this, so this is kind of a hack. | |
| class MockSlabAllocator { | |
| static size_t LastSlabSize; | |
| public: | |
| ~MockSlabAllocator() { } | |
| void *Allocate(size_t Size, size_t /*Alignment*/) { | |
| // Allocate space for the alignment, the slab, and a void* that goes right | |
| // before the slab. | |
| size_t Alignment = 4096; | |
| void *MemBase = safe_malloc(Size + Alignment - 1 + sizeof(void*)); | |
| // Find the slab start. | |
| void *Slab = (void *)alignAddr((char*)MemBase + sizeof(void *), Alignment); | |
| // Hold a pointer to the base so we can free the whole malloced block. | |
| ((void**)Slab)[-1] = MemBase; | |
| LastSlabSize = Size; | |
| return Slab; | |
| } | |
| void Deallocate(void *Slab, size_t Size) { | |
| free(((void**)Slab)[-1]); | |
| } | |
| static size_t GetLastSlabSize() { return LastSlabSize; } | |
| }; | |
| size_t MockSlabAllocator::LastSlabSize = 0; | |
| // Allocate a large-ish block with a really large alignment so that the | |
| // allocator will think that it has space, but after it does the alignment it | |
| // will not. | |
| TEST(AllocatorTest, TestBigAlignment) { | |
| BumpPtrAllocatorImpl<MockSlabAllocator> Alloc; | |
| // First allocate a tiny bit to ensure we have to re-align things. | |
| (void)Alloc.Allocate(1, 1); | |
| // Now the big chunk with a big alignment. | |
| (void)Alloc.Allocate(3000, 2048); | |
| // We test that the last slab size is not the default 4096 byte slab, but | |
| // rather a custom sized slab that is larger. | |
| EXPECT_GT(MockSlabAllocator::GetLastSlabSize(), 4096u); | |
| } | |
| } // anonymous namespace |