| /* |
| ** 2016-09-07 |
| ** |
| ** The author disclaims copyright to this source code. In place of |
| ** a legal notice, here is a blessing: |
| ** |
| ** May you do good and not evil. |
| ** May you find forgiveness for yourself and forgive others. |
| ** May you share freely, never taking more than you give. |
| ** |
| ****************************************************************************** |
| ** |
| ** This file implements an in-memory VFS. A database is held as a contiguous |
| ** block of memory. |
| ** |
| ** This file also implements interface sqlite3_serialize() and |
| ** sqlite3_deserialize(). |
| */ |
| #include "sqliteInt.h" |
| #ifndef SQLITE_OMIT_DESERIALIZE |
| |
| /* |
| ** Forward declaration of objects used by this utility |
| */ |
| typedef struct sqlite3_vfs MemVfs; |
| typedef struct MemFile MemFile; |
| typedef struct MemStore MemStore; |
| |
| /* Access to a lower-level VFS that (might) implement dynamic loading, |
| ** access to randomness, etc. |
| */ |
| #define ORIGVFS(p) ((sqlite3_vfs*)((p)->pAppData)) |
| |
| /* Storage for a memdb file. |
| ** |
| ** An memdb object can be shared or separate. Shared memdb objects can be |
| ** used by more than one database connection. Mutexes are used by shared |
| ** memdb objects to coordinate access. Separate memdb objects are only |
| ** connected to a single database connection and do not require additional |
| ** mutexes. |
| ** |
| ** Shared memdb objects have .zFName!=0 and .pMutex!=0. They are created |
| ** using "file:/name?vfs=memdb". The first character of the name must be |
| ** "/" or else the object will be a separate memdb object. All shared |
| ** memdb objects are stored in memdb_g.apMemStore[] in an arbitrary order. |
| ** |
| ** Separate memdb objects are created using a name that does not begin |
| ** with "/" or using sqlite3_deserialize(). |
| ** |
| ** Access rules for shared MemStore objects: |
| ** |
| ** * .zFName is initialized when the object is created and afterwards |
| ** is unchanged until the object is destroyed. So it can be accessed |
| ** at any time as long as we know the object is not being destroyed, |
| ** which means while either the SQLITE_MUTEX_STATIC_VFS1 or |
| ** .pMutex is held or the object is not part of memdb_g.apMemStore[]. |
| ** |
| ** * Can .pMutex can only be changed while holding the |
| ** SQLITE_MUTEX_STATIC_VFS1 mutex or while the object is not part |
| ** of memdb_g.apMemStore[]. |
| ** |
| ** * Other fields can only be changed while holding the .pMutex mutex |
| ** or when the .nRef is less than zero and the object is not part of |
| ** memdb_g.apMemStore[]. |
| ** |
| ** * The .aData pointer has the added requirement that it can can only |
| ** be changed (for resizing) when nMmap is zero. |
| ** |
| */ |
| struct MemStore { |
| sqlite3_int64 sz; /* Size of the file */ |
| sqlite3_int64 szAlloc; /* Space allocated to aData */ |
| sqlite3_int64 szMax; /* Maximum allowed size of the file */ |
| unsigned char *aData; /* content of the file */ |
| sqlite3_mutex *pMutex; /* Used by shared stores only */ |
| int nMmap; /* Number of memory mapped pages */ |
| unsigned mFlags; /* Flags */ |
| int nRdLock; /* Number of readers */ |
| int nWrLock; /* Number of writers. (Always 0 or 1) */ |
| int nRef; /* Number of users of this MemStore */ |
| char *zFName; /* The filename for shared stores */ |
| }; |
| |
| /* An open file */ |
| struct MemFile { |
| sqlite3_file base; /* IO methods */ |
| MemStore *pStore; /* The storage */ |
| int eLock; /* Most recent lock against this file */ |
| }; |
| |
| /* |
| ** File-scope variables for holding the memdb files that are accessible |
| ** to multiple database connections in separate threads. |
| ** |
| ** Must hold SQLITE_MUTEX_STATIC_VFS1 to access any part of this object. |
| */ |
| static struct MemFS { |
| int nMemStore; /* Number of shared MemStore objects */ |
| MemStore **apMemStore; /* Array of all shared MemStore objects */ |
| } memdb_g; |
| |
| /* |
| ** Methods for MemFile |
| */ |
| static int memdbClose(sqlite3_file*); |
| static int memdbRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst); |
| static int memdbWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64 iOfst); |
| static int memdbTruncate(sqlite3_file*, sqlite3_int64 size); |
| static int memdbSync(sqlite3_file*, int flags); |
| static int memdbFileSize(sqlite3_file*, sqlite3_int64 *pSize); |
| static int memdbLock(sqlite3_file*, int); |
| /* static int memdbCheckReservedLock(sqlite3_file*, int *pResOut);// not used */ |
| static int memdbFileControl(sqlite3_file*, int op, void *pArg); |
| /* static int memdbSectorSize(sqlite3_file*); // not used */ |
| static int memdbDeviceCharacteristics(sqlite3_file*); |
| static int memdbFetch(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp); |
| static int memdbUnfetch(sqlite3_file*, sqlite3_int64 iOfst, void *p); |
| |
| /* |
| ** Methods for MemVfs |
| */ |
| static int memdbOpen(sqlite3_vfs*, const char *, sqlite3_file*, int , int *); |
| /* static int memdbDelete(sqlite3_vfs*, const char *zName, int syncDir); */ |
| static int memdbAccess(sqlite3_vfs*, const char *zName, int flags, int *); |
| static int memdbFullPathname(sqlite3_vfs*, const char *zName, int, char *zOut); |
| static void *memdbDlOpen(sqlite3_vfs*, const char *zFilename); |
| static void memdbDlError(sqlite3_vfs*, int nByte, char *zErrMsg); |
| static void (*memdbDlSym(sqlite3_vfs *pVfs, void *p, const char*zSym))(void); |
| static void memdbDlClose(sqlite3_vfs*, void*); |
| static int memdbRandomness(sqlite3_vfs*, int nByte, char *zOut); |
| static int memdbSleep(sqlite3_vfs*, int microseconds); |
| /* static int memdbCurrentTime(sqlite3_vfs*, double*); */ |
| static int memdbGetLastError(sqlite3_vfs*, int, char *); |
| static int memdbCurrentTimeInt64(sqlite3_vfs*, sqlite3_int64*); |
| |
| static sqlite3_vfs memdb_vfs = { |
| 2, /* iVersion */ |
| 0, /* szOsFile (set when registered) */ |
| 1024, /* mxPathname */ |
| 0, /* pNext */ |
| "memdb", /* zName */ |
| 0, /* pAppData (set when registered) */ |
| memdbOpen, /* xOpen */ |
| 0, /* memdbDelete, */ /* xDelete */ |
| memdbAccess, /* xAccess */ |
| memdbFullPathname, /* xFullPathname */ |
| memdbDlOpen, /* xDlOpen */ |
| memdbDlError, /* xDlError */ |
| memdbDlSym, /* xDlSym */ |
| memdbDlClose, /* xDlClose */ |
| memdbRandomness, /* xRandomness */ |
| memdbSleep, /* xSleep */ |
| 0, /* memdbCurrentTime, */ /* xCurrentTime */ |
| memdbGetLastError, /* xGetLastError */ |
| memdbCurrentTimeInt64, /* xCurrentTimeInt64 */ |
| 0, /* xSetSystemCall */ |
| 0, /* xGetSystemCall */ |
| 0, /* xNextSystemCall */ |
| }; |
| |
| static const sqlite3_io_methods memdb_io_methods = { |
| 3, /* iVersion */ |
| memdbClose, /* xClose */ |
| memdbRead, /* xRead */ |
| memdbWrite, /* xWrite */ |
| memdbTruncate, /* xTruncate */ |
| memdbSync, /* xSync */ |
| memdbFileSize, /* xFileSize */ |
| memdbLock, /* xLock */ |
| memdbLock, /* xUnlock - same as xLock in this case */ |
| 0, /* memdbCheckReservedLock, */ /* xCheckReservedLock */ |
| memdbFileControl, /* xFileControl */ |
| 0, /* memdbSectorSize,*/ /* xSectorSize */ |
| memdbDeviceCharacteristics, /* xDeviceCharacteristics */ |
| 0, /* xShmMap */ |
| 0, /* xShmLock */ |
| 0, /* xShmBarrier */ |
| 0, /* xShmUnmap */ |
| memdbFetch, /* xFetch */ |
| memdbUnfetch /* xUnfetch */ |
| }; |
| |
| /* |
| ** Enter/leave the mutex on a MemStore |
| */ |
| #if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE==0 |
| static void memdbEnter(MemStore *p){ |
| UNUSED_PARAMETER(p); |
| } |
| static void memdbLeave(MemStore *p){ |
| UNUSED_PARAMETER(p); |
| } |
| #else |
| static void memdbEnter(MemStore *p){ |
| sqlite3_mutex_enter(p->pMutex); |
| } |
| static void memdbLeave(MemStore *p){ |
| sqlite3_mutex_leave(p->pMutex); |
| } |
| #endif |
| |
| |
| |
| /* |
| ** Close an memdb-file. |
| ** Free the underlying MemStore object when its refcount drops to zero |
| ** or less. |
| */ |
| static int memdbClose(sqlite3_file *pFile){ |
| MemStore *p = ((MemFile*)pFile)->pStore; |
| if( p->zFName ){ |
| int i; |
| #ifndef SQLITE_MUTEX_OMIT |
| sqlite3_mutex *pVfsMutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1); |
| #endif |
| sqlite3_mutex_enter(pVfsMutex); |
| for(i=0; ALWAYS(i<memdb_g.nMemStore); i++){ |
| if( memdb_g.apMemStore[i]==p ){ |
| memdbEnter(p); |
| if( p->nRef==1 ){ |
| memdb_g.apMemStore[i] = memdb_g.apMemStore[--memdb_g.nMemStore]; |
| if( memdb_g.nMemStore==0 ){ |
| sqlite3_free(memdb_g.apMemStore); |
| memdb_g.apMemStore = 0; |
| } |
| } |
| break; |
| } |
| } |
| sqlite3_mutex_leave(pVfsMutex); |
| }else{ |
| memdbEnter(p); |
| } |
| p->nRef--; |
| if( p->nRef<=0 ){ |
| if( p->mFlags & SQLITE_DESERIALIZE_FREEONCLOSE ){ |
| sqlite3_free(p->aData); |
| } |
| memdbLeave(p); |
| sqlite3_mutex_free(p->pMutex); |
| sqlite3_free(p); |
| }else{ |
| memdbLeave(p); |
| } |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Read data from an memdb-file. |
| */ |
| static int memdbRead( |
| sqlite3_file *pFile, |
| void *zBuf, |
| int iAmt, |
| sqlite_int64 iOfst |
| ){ |
| MemStore *p = ((MemFile*)pFile)->pStore; |
| memdbEnter(p); |
| if( iOfst+iAmt>p->sz ){ |
| memset(zBuf, 0, iAmt); |
| if( iOfst<p->sz ) memcpy(zBuf, p->aData+iOfst, p->sz - iOfst); |
| memdbLeave(p); |
| return SQLITE_IOERR_SHORT_READ; |
| } |
| memcpy(zBuf, p->aData+iOfst, iAmt); |
| memdbLeave(p); |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Try to enlarge the memory allocation to hold at least sz bytes |
| */ |
| static int memdbEnlarge(MemStore *p, sqlite3_int64 newSz){ |
| unsigned char *pNew; |
| if( (p->mFlags & SQLITE_DESERIALIZE_RESIZEABLE)==0 || NEVER(p->nMmap>0) ){ |
| return SQLITE_FULL; |
| } |
| if( newSz>p->szMax ){ |
| return SQLITE_FULL; |
| } |
| newSz *= 2; |
| if( newSz>p->szMax ) newSz = p->szMax; |
| pNew = sqlite3Realloc(p->aData, newSz); |
| if( pNew==0 ) return SQLITE_IOERR_NOMEM; |
| p->aData = pNew; |
| p->szAlloc = newSz; |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Write data to an memdb-file. |
| */ |
| static int memdbWrite( |
| sqlite3_file *pFile, |
| const void *z, |
| int iAmt, |
| sqlite_int64 iOfst |
| ){ |
| MemStore *p = ((MemFile*)pFile)->pStore; |
| memdbEnter(p); |
| if( NEVER(p->mFlags & SQLITE_DESERIALIZE_READONLY) ){ |
| /* Can't happen: memdbLock() will return SQLITE_READONLY before |
| ** reaching this point */ |
| memdbLeave(p); |
| return SQLITE_IOERR_WRITE; |
| } |
| if( iOfst+iAmt>p->sz ){ |
| int rc; |
| if( iOfst+iAmt>p->szAlloc |
| && (rc = memdbEnlarge(p, iOfst+iAmt))!=SQLITE_OK |
| ){ |
| memdbLeave(p); |
| return rc; |
| } |
| if( iOfst>p->sz ) memset(p->aData+p->sz, 0, iOfst-p->sz); |
| p->sz = iOfst+iAmt; |
| } |
| memcpy(p->aData+iOfst, z, iAmt); |
| memdbLeave(p); |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Truncate an memdb-file. |
| ** |
| ** In rollback mode (which is always the case for memdb, as it does not |
| ** support WAL mode) the truncate() method is only used to reduce |
| ** the size of a file, never to increase the size. |
| */ |
| static int memdbTruncate(sqlite3_file *pFile, sqlite_int64 size){ |
| MemStore *p = ((MemFile*)pFile)->pStore; |
| int rc = SQLITE_OK; |
| memdbEnter(p); |
| if( size>p->sz ){ |
| /* This can only happen with a corrupt wal mode db */ |
| rc = SQLITE_CORRUPT; |
| }else{ |
| p->sz = size; |
| } |
| memdbLeave(p); |
| return rc; |
| } |
| |
| /* |
| ** Sync an memdb-file. |
| */ |
| static int memdbSync(sqlite3_file *pFile, int flags){ |
| UNUSED_PARAMETER(pFile); |
| UNUSED_PARAMETER(flags); |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Return the current file-size of an memdb-file. |
| */ |
| static int memdbFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){ |
| MemStore *p = ((MemFile*)pFile)->pStore; |
| memdbEnter(p); |
| *pSize = p->sz; |
| memdbLeave(p); |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Lock an memdb-file. |
| */ |
| static int memdbLock(sqlite3_file *pFile, int eLock){ |
| MemFile *pThis = (MemFile*)pFile; |
| MemStore *p = pThis->pStore; |
| int rc = SQLITE_OK; |
| if( eLock==pThis->eLock ) return SQLITE_OK; |
| memdbEnter(p); |
| if( eLock>SQLITE_LOCK_SHARED ){ |
| if( p->mFlags & SQLITE_DESERIALIZE_READONLY ){ |
| rc = SQLITE_READONLY; |
| }else if( pThis->eLock<=SQLITE_LOCK_SHARED ){ |
| if( p->nWrLock ){ |
| rc = SQLITE_BUSY; |
| }else{ |
| p->nWrLock = 1; |
| } |
| } |
| }else if( eLock==SQLITE_LOCK_SHARED ){ |
| if( pThis->eLock > SQLITE_LOCK_SHARED ){ |
| assert( p->nWrLock==1 ); |
| p->nWrLock = 0; |
| }else if( p->nWrLock ){ |
| rc = SQLITE_BUSY; |
| }else{ |
| p->nRdLock++; |
| } |
| }else{ |
| assert( eLock==SQLITE_LOCK_NONE ); |
| if( pThis->eLock>SQLITE_LOCK_SHARED ){ |
| assert( p->nWrLock==1 ); |
| p->nWrLock = 0; |
| } |
| assert( p->nRdLock>0 ); |
| p->nRdLock--; |
| } |
| if( rc==SQLITE_OK ) pThis->eLock = eLock; |
| memdbLeave(p); |
| return rc; |
| } |
| |
| #if 0 |
| /* |
| ** This interface is only used for crash recovery, which does not |
| ** occur on an in-memory database. |
| */ |
| static int memdbCheckReservedLock(sqlite3_file *pFile, int *pResOut){ |
| *pResOut = 0; |
| return SQLITE_OK; |
| } |
| #endif |
| |
| |
| /* |
| ** File control method. For custom operations on an memdb-file. |
| */ |
| static int memdbFileControl(sqlite3_file *pFile, int op, void *pArg){ |
| MemStore *p = ((MemFile*)pFile)->pStore; |
| int rc = SQLITE_NOTFOUND; |
| memdbEnter(p); |
| if( op==SQLITE_FCNTL_VFSNAME ){ |
| *(char**)pArg = sqlite3_mprintf("memdb(%p,%lld)", p->aData, p->sz); |
| rc = SQLITE_OK; |
| } |
| if( op==SQLITE_FCNTL_SIZE_LIMIT ){ |
| sqlite3_int64 iLimit = *(sqlite3_int64*)pArg; |
| if( iLimit<p->sz ){ |
| if( iLimit<0 ){ |
| iLimit = p->szMax; |
| }else{ |
| iLimit = p->sz; |
| } |
| } |
| p->szMax = iLimit; |
| *(sqlite3_int64*)pArg = iLimit; |
| rc = SQLITE_OK; |
| } |
| memdbLeave(p); |
| return rc; |
| } |
| |
| #if 0 /* Not used because of SQLITE_IOCAP_POWERSAFE_OVERWRITE */ |
| /* |
| ** Return the sector-size in bytes for an memdb-file. |
| */ |
| static int memdbSectorSize(sqlite3_file *pFile){ |
| return 1024; |
| } |
| #endif |
| |
| /* |
| ** Return the device characteristic flags supported by an memdb-file. |
| */ |
| static int memdbDeviceCharacteristics(sqlite3_file *pFile){ |
| UNUSED_PARAMETER(pFile); |
| return SQLITE_IOCAP_ATOMIC | |
| SQLITE_IOCAP_POWERSAFE_OVERWRITE | |
| SQLITE_IOCAP_SAFE_APPEND | |
| SQLITE_IOCAP_SEQUENTIAL; |
| } |
| |
| /* Fetch a page of a memory-mapped file */ |
| static int memdbFetch( |
| sqlite3_file *pFile, |
| sqlite3_int64 iOfst, |
| int iAmt, |
| void **pp |
| ){ |
| MemStore *p = ((MemFile*)pFile)->pStore; |
| memdbEnter(p); |
| if( iOfst+iAmt>p->sz || (p->mFlags & SQLITE_DESERIALIZE_RESIZEABLE)!=0 ){ |
| *pp = 0; |
| }else{ |
| p->nMmap++; |
| *pp = (void*)(p->aData + iOfst); |
| } |
| memdbLeave(p); |
| return SQLITE_OK; |
| } |
| |
| /* Release a memory-mapped page */ |
| static int memdbUnfetch(sqlite3_file *pFile, sqlite3_int64 iOfst, void *pPage){ |
| MemStore *p = ((MemFile*)pFile)->pStore; |
| UNUSED_PARAMETER(iOfst); |
| UNUSED_PARAMETER(pPage); |
| memdbEnter(p); |
| p->nMmap--; |
| memdbLeave(p); |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Open an mem file handle. |
| */ |
| static int memdbOpen( |
| sqlite3_vfs *pVfs, |
| const char *zName, |
| sqlite3_file *pFd, |
| int flags, |
| int *pOutFlags |
| ){ |
| MemFile *pFile = (MemFile*)pFd; |
| MemStore *p = 0; |
| int szName; |
| UNUSED_PARAMETER(pVfs); |
| |
| memset(pFile, 0, sizeof(*pFile)); |
| szName = sqlite3Strlen30(zName); |
| if( szName>1 && zName[0]=='/' ){ |
| int i; |
| #ifndef SQLITE_MUTEX_OMIT |
| sqlite3_mutex *pVfsMutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1); |
| #endif |
| sqlite3_mutex_enter(pVfsMutex); |
| for(i=0; i<memdb_g.nMemStore; i++){ |
| if( strcmp(memdb_g.apMemStore[i]->zFName,zName)==0 ){ |
| p = memdb_g.apMemStore[i]; |
| break; |
| } |
| } |
| if( p==0 ){ |
| MemStore **apNew; |
| p = sqlite3Malloc( sizeof(*p) + szName + 3 ); |
| if( p==0 ){ |
| sqlite3_mutex_leave(pVfsMutex); |
| return SQLITE_NOMEM; |
| } |
| apNew = sqlite3Realloc(memdb_g.apMemStore, |
| sizeof(apNew[0])*(memdb_g.nMemStore+1) ); |
| if( apNew==0 ){ |
| sqlite3_free(p); |
| sqlite3_mutex_leave(pVfsMutex); |
| return SQLITE_NOMEM; |
| } |
| apNew[memdb_g.nMemStore++] = p; |
| memdb_g.apMemStore = apNew; |
| memset(p, 0, sizeof(*p)); |
| p->mFlags = SQLITE_DESERIALIZE_RESIZEABLE|SQLITE_DESERIALIZE_FREEONCLOSE; |
| p->szMax = sqlite3GlobalConfig.mxMemdbSize; |
| p->zFName = (char*)&p[1]; |
| memcpy(p->zFName, zName, szName+1); |
| p->pMutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST); |
| if( p->pMutex==0 ){ |
| memdb_g.nMemStore--; |
| sqlite3_free(p); |
| sqlite3_mutex_leave(pVfsMutex); |
| return SQLITE_NOMEM; |
| } |
| p->nRef = 1; |
| memdbEnter(p); |
| }else{ |
| memdbEnter(p); |
| p->nRef++; |
| } |
| sqlite3_mutex_leave(pVfsMutex); |
| }else{ |
| p = sqlite3Malloc( sizeof(*p) ); |
| if( p==0 ){ |
| return SQLITE_NOMEM; |
| } |
| memset(p, 0, sizeof(*p)); |
| p->mFlags = SQLITE_DESERIALIZE_RESIZEABLE | SQLITE_DESERIALIZE_FREEONCLOSE; |
| p->szMax = sqlite3GlobalConfig.mxMemdbSize; |
| } |
| pFile->pStore = p; |
| if( pOutFlags!=0 ){ |
| *pOutFlags = flags | SQLITE_OPEN_MEMORY; |
| } |
| pFd->pMethods = &memdb_io_methods; |
| memdbLeave(p); |
| return SQLITE_OK; |
| } |
| |
| #if 0 /* Only used to delete rollback journals, super-journals, and WAL |
| ** files, none of which exist in memdb. So this routine is never used */ |
| /* |
| ** Delete the file located at zPath. If the dirSync argument is true, |
| ** ensure the file-system modifications are synced to disk before |
| ** returning. |
| */ |
| static int memdbDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){ |
| return SQLITE_IOERR_DELETE; |
| } |
| #endif |
| |
| /* |
| ** Test for access permissions. Return true if the requested permission |
| ** is available, or false otherwise. |
| ** |
| ** With memdb, no files ever exist on disk. So always return false. |
| */ |
| static int memdbAccess( |
| sqlite3_vfs *pVfs, |
| const char *zPath, |
| int flags, |
| int *pResOut |
| ){ |
| UNUSED_PARAMETER(pVfs); |
| UNUSED_PARAMETER(zPath); |
| UNUSED_PARAMETER(flags); |
| *pResOut = 0; |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Populate buffer zOut with the full canonical pathname corresponding |
| ** to the pathname in zPath. zOut is guaranteed to point to a buffer |
| ** of at least (INST_MAX_PATHNAME+1) bytes. |
| */ |
| static int memdbFullPathname( |
| sqlite3_vfs *pVfs, |
| const char *zPath, |
| int nOut, |
| char *zOut |
| ){ |
| UNUSED_PARAMETER(pVfs); |
| sqlite3_snprintf(nOut, zOut, "%s", zPath); |
| return SQLITE_OK; |
| } |
| |
| /* |
| ** Open the dynamic library located at zPath and return a handle. |
| */ |
| static void *memdbDlOpen(sqlite3_vfs *pVfs, const char *zPath){ |
| return ORIGVFS(pVfs)->xDlOpen(ORIGVFS(pVfs), zPath); |
| } |
| |
| /* |
| ** Populate the buffer zErrMsg (size nByte bytes) with a human readable |
| ** utf-8 string describing the most recent error encountered associated |
| ** with dynamic libraries. |
| */ |
| static void memdbDlError(sqlite3_vfs *pVfs, int nByte, char *zErrMsg){ |
| ORIGVFS(pVfs)->xDlError(ORIGVFS(pVfs), nByte, zErrMsg); |
| } |
| |
| /* |
| ** Return a pointer to the symbol zSymbol in the dynamic library pHandle. |
| */ |
| static void (*memdbDlSym(sqlite3_vfs *pVfs, void *p, const char *zSym))(void){ |
| return ORIGVFS(pVfs)->xDlSym(ORIGVFS(pVfs), p, zSym); |
| } |
| |
| /* |
| ** Close the dynamic library handle pHandle. |
| */ |
| static void memdbDlClose(sqlite3_vfs *pVfs, void *pHandle){ |
| ORIGVFS(pVfs)->xDlClose(ORIGVFS(pVfs), pHandle); |
| } |
| |
| /* |
| ** Populate the buffer pointed to by zBufOut with nByte bytes of |
| ** random data. |
| */ |
| static int memdbRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){ |
| return ORIGVFS(pVfs)->xRandomness(ORIGVFS(pVfs), nByte, zBufOut); |
| } |
| |
| /* |
| ** Sleep for nMicro microseconds. Return the number of microseconds |
| ** actually slept. |
| */ |
| static int memdbSleep(sqlite3_vfs *pVfs, int nMicro){ |
| return ORIGVFS(pVfs)->xSleep(ORIGVFS(pVfs), nMicro); |
| } |
| |
| #if 0 /* Never used. Modern cores only call xCurrentTimeInt64() */ |
| /* |
| ** Return the current time as a Julian Day number in *pTimeOut. |
| */ |
| static int memdbCurrentTime(sqlite3_vfs *pVfs, double *pTimeOut){ |
| return ORIGVFS(pVfs)->xCurrentTime(ORIGVFS(pVfs), pTimeOut); |
| } |
| #endif |
| |
| static int memdbGetLastError(sqlite3_vfs *pVfs, int a, char *b){ |
| return ORIGVFS(pVfs)->xGetLastError(ORIGVFS(pVfs), a, b); |
| } |
| static int memdbCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *p){ |
| return ORIGVFS(pVfs)->xCurrentTimeInt64(ORIGVFS(pVfs), p); |
| } |
| |
| /* |
| ** Translate a database connection pointer and schema name into a |
| ** MemFile pointer. |
| */ |
| static MemFile *memdbFromDbSchema(sqlite3 *db, const char *zSchema){ |
| MemFile *p = 0; |
| MemStore *pStore; |
| int rc = sqlite3_file_control(db, zSchema, SQLITE_FCNTL_FILE_POINTER, &p); |
| if( rc ) return 0; |
| if( p->base.pMethods!=&memdb_io_methods ) return 0; |
| pStore = p->pStore; |
| memdbEnter(pStore); |
| if( pStore->zFName!=0 ) p = 0; |
| memdbLeave(pStore); |
| return p; |
| } |
| |
| /* |
| ** Return the serialization of a database |
| */ |
| unsigned char *sqlite3_serialize( |
| sqlite3 *db, /* The database connection */ |
| const char *zSchema, /* Which database within the connection */ |
| sqlite3_int64 *piSize, /* Write size here, if not NULL */ |
| unsigned int mFlags /* Maybe SQLITE_SERIALIZE_NOCOPY */ |
| ){ |
| MemFile *p; |
| int iDb; |
| Btree *pBt; |
| sqlite3_int64 sz; |
| int szPage = 0; |
| sqlite3_stmt *pStmt = 0; |
| unsigned char *pOut; |
| char *zSql; |
| int rc; |
| |
| #ifdef SQLITE_ENABLE_API_ARMOR |
| if( !sqlite3SafetyCheckOk(db) ){ |
| (void)SQLITE_MISUSE_BKPT; |
| return 0; |
| } |
| #endif |
| |
| if( zSchema==0 ) zSchema = db->aDb[0].zDbSName; |
| p = memdbFromDbSchema(db, zSchema); |
| iDb = sqlite3FindDbName(db, zSchema); |
| if( piSize ) *piSize = -1; |
| if( iDb<0 ) return 0; |
| if( p ){ |
| MemStore *pStore = p->pStore; |
| assert( pStore->pMutex==0 ); |
| if( piSize ) *piSize = pStore->sz; |
| if( mFlags & SQLITE_SERIALIZE_NOCOPY ){ |
| pOut = pStore->aData; |
| }else{ |
| pOut = sqlite3_malloc64( pStore->sz ); |
| if( pOut ) memcpy(pOut, pStore->aData, pStore->sz); |
| } |
| return pOut; |
| } |
| pBt = db->aDb[iDb].pBt; |
| if( pBt==0 ) return 0; |
| szPage = sqlite3BtreeGetPageSize(pBt); |
| zSql = sqlite3_mprintf("PRAGMA \"%w\".page_count", zSchema); |
| rc = zSql ? sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0) : SQLITE_NOMEM; |
| sqlite3_free(zSql); |
| if( rc ) return 0; |
| rc = sqlite3_step(pStmt); |
| if( rc!=SQLITE_ROW ){ |
| pOut = 0; |
| }else{ |
| sz = sqlite3_column_int64(pStmt, 0)*szPage; |
| if( piSize ) *piSize = sz; |
| if( mFlags & SQLITE_SERIALIZE_NOCOPY ){ |
| pOut = 0; |
| }else{ |
| pOut = sqlite3_malloc64( sz ); |
| if( pOut ){ |
| int nPage = sqlite3_column_int(pStmt, 0); |
| Pager *pPager = sqlite3BtreePager(pBt); |
| int pgno; |
| for(pgno=1; pgno<=nPage; pgno++){ |
| DbPage *pPage = 0; |
| unsigned char *pTo = pOut + szPage*(sqlite3_int64)(pgno-1); |
| rc = sqlite3PagerGet(pPager, pgno, (DbPage**)&pPage, 0); |
| if( rc==SQLITE_OK ){ |
| memcpy(pTo, sqlite3PagerGetData(pPage), szPage); |
| }else{ |
| memset(pTo, 0, szPage); |
| } |
| sqlite3PagerUnref(pPage); |
| } |
| } |
| } |
| } |
| sqlite3_finalize(pStmt); |
| return pOut; |
| } |
| |
| /* Convert zSchema to a MemDB and initialize its content. |
| */ |
| int sqlite3_deserialize( |
| sqlite3 *db, /* The database connection */ |
| const char *zSchema, /* Which DB to reopen with the deserialization */ |
| unsigned char *pData, /* The serialized database content */ |
| sqlite3_int64 szDb, /* Number bytes in the deserialization */ |
| sqlite3_int64 szBuf, /* Total size of buffer pData[] */ |
| unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */ |
| ){ |
| MemFile *p; |
| char *zSql; |
| sqlite3_stmt *pStmt = 0; |
| int rc; |
| int iDb; |
| |
| #ifdef SQLITE_ENABLE_API_ARMOR |
| if( !sqlite3SafetyCheckOk(db) ){ |
| return SQLITE_MISUSE_BKPT; |
| } |
| if( szDb<0 ) return SQLITE_MISUSE_BKPT; |
| if( szBuf<0 ) return SQLITE_MISUSE_BKPT; |
| #endif |
| |
| sqlite3_mutex_enter(db->mutex); |
| if( zSchema==0 ) zSchema = db->aDb[0].zDbSName; |
| iDb = sqlite3FindDbName(db, zSchema); |
| testcase( iDb==1 ); |
| if( iDb<2 && iDb!=0 ){ |
| rc = SQLITE_ERROR; |
| goto end_deserialize; |
| } |
| zSql = sqlite3_mprintf("ATTACH x AS %Q", zSchema); |
| if( zSql==0 ){ |
| rc = SQLITE_NOMEM; |
| }else{ |
| rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); |
| sqlite3_free(zSql); |
| } |
| if( rc ) goto end_deserialize; |
| db->init.iDb = (u8)iDb; |
| db->init.reopenMemdb = 1; |
| rc = sqlite3_step(pStmt); |
| db->init.reopenMemdb = 0; |
| if( rc!=SQLITE_DONE ){ |
| rc = SQLITE_ERROR; |
| goto end_deserialize; |
| } |
| p = memdbFromDbSchema(db, zSchema); |
| if( p==0 ){ |
| rc = SQLITE_ERROR; |
| }else{ |
| MemStore *pStore = p->pStore; |
| pStore->aData = pData; |
| pData = 0; |
| pStore->sz = szDb; |
| pStore->szAlloc = szBuf; |
| pStore->szMax = szBuf; |
| if( pStore->szMax<sqlite3GlobalConfig.mxMemdbSize ){ |
| pStore->szMax = sqlite3GlobalConfig.mxMemdbSize; |
| } |
| pStore->mFlags = mFlags; |
| rc = SQLITE_OK; |
| } |
| |
| end_deserialize: |
| sqlite3_finalize(pStmt); |
| if( pData && (mFlags & SQLITE_DESERIALIZE_FREEONCLOSE)!=0 ){ |
| sqlite3_free(pData); |
| } |
| sqlite3_mutex_leave(db->mutex); |
| return rc; |
| } |
| |
| /* |
| ** This routine is called when the extension is loaded. |
| ** Register the new VFS. |
| */ |
| int sqlite3MemdbInit(void){ |
| sqlite3_vfs *pLower = sqlite3_vfs_find(0); |
| unsigned int sz; |
| if( NEVER(pLower==0) ) return SQLITE_ERROR; |
| sz = pLower->szOsFile; |
| memdb_vfs.pAppData = pLower; |
| /* The following conditional can only be true when compiled for |
| ** Windows x86 and SQLITE_MAX_MMAP_SIZE=0. We always leave |
| ** it in, to be safe, but it is marked as NO_TEST since there |
| ** is no way to reach it under most builds. */ |
| if( sz<sizeof(MemFile) ) sz = sizeof(MemFile); /*NO_TEST*/ |
| memdb_vfs.szOsFile = sz; |
| return sqlite3_vfs_register(&memdb_vfs, 0); |
| } |
| #endif /* SQLITE_OMIT_DESERIALIZE */ |