| /* Copyright (c) 2007-2008 CSIRO |
| Copyright (c) 2007-2010 Xiph.Org Foundation |
| Copyright (c) 2008 Gregory Maxwell |
| Written by Jean-Marc Valin and Gregory Maxwell */ |
| /* |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| - Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| - Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER |
| OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #define CELT_C |
| |
| #include "os_support.h" |
| #include "mdct.h" |
| #include <math.h> |
| #include "celt.h" |
| #include "pitch.h" |
| #include "bands.h" |
| #include "modes.h" |
| #include "entcode.h" |
| #include "quant_bands.h" |
| #include "rate.h" |
| #include "stack_alloc.h" |
| #include "mathops.h" |
| #include "float_cast.h" |
| #include <stdarg.h> |
| #include "celt_lpc.h" |
| #include "vq.h" |
| |
| #ifndef PACKAGE_VERSION |
| #define PACKAGE_VERSION "unknown" |
| #endif |
| |
| #if defined(MIPSr1_ASM) |
| #include "mips/celt_mipsr1.h" |
| #endif |
| |
| |
| int resampling_factor(opus_int32 rate) |
| { |
| int ret; |
| switch (rate) |
| { |
| case 48000: |
| ret = 1; |
| break; |
| case 24000: |
| ret = 2; |
| break; |
| case 16000: |
| ret = 3; |
| break; |
| case 12000: |
| ret = 4; |
| break; |
| case 8000: |
| ret = 6; |
| break; |
| default: |
| #ifndef CUSTOM_MODES |
| celt_assert(0); |
| #endif |
| ret = 0; |
| break; |
| } |
| return ret; |
| } |
| |
| #if !defined(OVERRIDE_COMB_FILTER_CONST) || defined(NON_STATIC_COMB_FILTER_CONST_C) |
| /* This version should be faster on ARM */ |
| #ifdef OPUS_ARM_ASM |
| #ifndef NON_STATIC_COMB_FILTER_CONST_C |
| static |
| #endif |
| void comb_filter_const_c(opus_val32 *y, opus_val32 *x, int T, int N, |
| opus_val16 g10, opus_val16 g11, opus_val16 g12) |
| { |
| opus_val32 x0, x1, x2, x3, x4; |
| int i; |
| x4 = SHL32(x[-T-2], 1); |
| x3 = SHL32(x[-T-1], 1); |
| x2 = SHL32(x[-T], 1); |
| x1 = SHL32(x[-T+1], 1); |
| for (i=0;i<N-4;i+=5) |
| { |
| opus_val32 t; |
| x0=SHL32(x[i-T+2],1); |
| t = MAC16_32_Q16(x[i], g10, x2); |
| t = MAC16_32_Q16(t, g11, ADD32(x1,x3)); |
| t = MAC16_32_Q16(t, g12, ADD32(x0,x4)); |
| t = SATURATE(t, SIG_SAT); |
| y[i] = t; |
| x4=SHL32(x[i-T+3],1); |
| t = MAC16_32_Q16(x[i+1], g10, x1); |
| t = MAC16_32_Q16(t, g11, ADD32(x0,x2)); |
| t = MAC16_32_Q16(t, g12, ADD32(x4,x3)); |
| t = SATURATE(t, SIG_SAT); |
| y[i+1] = t; |
| x3=SHL32(x[i-T+4],1); |
| t = MAC16_32_Q16(x[i+2], g10, x0); |
| t = MAC16_32_Q16(t, g11, ADD32(x4,x1)); |
| t = MAC16_32_Q16(t, g12, ADD32(x3,x2)); |
| t = SATURATE(t, SIG_SAT); |
| y[i+2] = t; |
| x2=SHL32(x[i-T+5],1); |
| t = MAC16_32_Q16(x[i+3], g10, x4); |
| t = MAC16_32_Q16(t, g11, ADD32(x3,x0)); |
| t = MAC16_32_Q16(t, g12, ADD32(x2,x1)); |
| t = SATURATE(t, SIG_SAT); |
| y[i+3] = t; |
| x1=SHL32(x[i-T+6],1); |
| t = MAC16_32_Q16(x[i+4], g10, x3); |
| t = MAC16_32_Q16(t, g11, ADD32(x2,x4)); |
| t = MAC16_32_Q16(t, g12, ADD32(x1,x0)); |
| t = SATURATE(t, SIG_SAT); |
| y[i+4] = t; |
| } |
| #ifdef CUSTOM_MODES |
| for (;i<N;i++) |
| { |
| opus_val32 t; |
| x0=SHL32(x[i-T+2],1); |
| t = MAC16_32_Q16(x[i], g10, x2); |
| t = MAC16_32_Q16(t, g11, ADD32(x1,x3)); |
| t = MAC16_32_Q16(t, g12, ADD32(x0,x4)); |
| t = SATURATE(t, SIG_SAT); |
| y[i] = t; |
| x4=x3; |
| x3=x2; |
| x2=x1; |
| x1=x0; |
| } |
| #endif |
| } |
| #else |
| #ifndef NON_STATIC_COMB_FILTER_CONST_C |
| static |
| #endif |
| void comb_filter_const_c(opus_val32 *y, opus_val32 *x, int T, int N, |
| opus_val16 g10, opus_val16 g11, opus_val16 g12) |
| { |
| opus_val32 x0, x1, x2, x3, x4; |
| int i; |
| x4 = x[-T-2]; |
| x3 = x[-T-1]; |
| x2 = x[-T]; |
| x1 = x[-T+1]; |
| for (i=0;i<N;i++) |
| { |
| x0=x[i-T+2]; |
| y[i] = x[i] |
| + MULT16_32_Q15(g10,x2) |
| + MULT16_32_Q15(g11,ADD32(x1,x3)) |
| + MULT16_32_Q15(g12,ADD32(x0,x4)); |
| y[i] = SATURATE(y[i], SIG_SAT); |
| x4=x3; |
| x3=x2; |
| x2=x1; |
| x1=x0; |
| } |
| |
| } |
| #endif |
| #endif |
| |
| #ifndef OVERRIDE_comb_filter |
| void comb_filter(opus_val32 *y, opus_val32 *x, int T0, int T1, int N, |
| opus_val16 g0, opus_val16 g1, int tapset0, int tapset1, |
| const opus_val16 *window, int overlap, int arch) |
| { |
| int i; |
| /* printf ("%d %d %f %f\n", T0, T1, g0, g1); */ |
| opus_val16 g00, g01, g02, g10, g11, g12; |
| opus_val32 x0, x1, x2, x3, x4; |
| static const opus_val16 gains[3][3] = { |
| {QCONST16(0.3066406250f, 15), QCONST16(0.2170410156f, 15), QCONST16(0.1296386719f, 15)}, |
| {QCONST16(0.4638671875f, 15), QCONST16(0.2680664062f, 15), QCONST16(0.f, 15)}, |
| {QCONST16(0.7998046875f, 15), QCONST16(0.1000976562f, 15), QCONST16(0.f, 15)}}; |
| |
| if (g0==0 && g1==0) |
| { |
| /* OPT: Happens to work without the OPUS_MOVE(), but only because the current encoder already copies x to y */ |
| if (x!=y) |
| OPUS_MOVE(y, x, N); |
| return; |
| } |
| /* When the gain is zero, T0 and/or T1 is set to zero. We need |
| to have then be at least 2 to avoid processing garbage data. */ |
| T0 = IMAX(T0, COMBFILTER_MINPERIOD); |
| T1 = IMAX(T1, COMBFILTER_MINPERIOD); |
| g00 = MULT16_16_P15(g0, gains[tapset0][0]); |
| g01 = MULT16_16_P15(g0, gains[tapset0][1]); |
| g02 = MULT16_16_P15(g0, gains[tapset0][2]); |
| g10 = MULT16_16_P15(g1, gains[tapset1][0]); |
| g11 = MULT16_16_P15(g1, gains[tapset1][1]); |
| g12 = MULT16_16_P15(g1, gains[tapset1][2]); |
| x1 = x[-T1+1]; |
| x2 = x[-T1 ]; |
| x3 = x[-T1-1]; |
| x4 = x[-T1-2]; |
| /* If the filter didn't change, we don't need the overlap */ |
| if (g0==g1 && T0==T1 && tapset0==tapset1) |
| overlap=0; |
| for (i=0;i<overlap;i++) |
| { |
| opus_val16 f; |
| x0=x[i-T1+2]; |
| f = MULT16_16_Q15(window[i],window[i]); |
| y[i] = x[i] |
| + MULT16_32_Q15(MULT16_16_Q15((Q15ONE-f),g00),x[i-T0]) |
| + MULT16_32_Q15(MULT16_16_Q15((Q15ONE-f),g01),ADD32(x[i-T0+1],x[i-T0-1])) |
| + MULT16_32_Q15(MULT16_16_Q15((Q15ONE-f),g02),ADD32(x[i-T0+2],x[i-T0-2])) |
| + MULT16_32_Q15(MULT16_16_Q15(f,g10),x2) |
| + MULT16_32_Q15(MULT16_16_Q15(f,g11),ADD32(x1,x3)) |
| + MULT16_32_Q15(MULT16_16_Q15(f,g12),ADD32(x0,x4)); |
| y[i] = SATURATE(y[i], SIG_SAT); |
| x4=x3; |
| x3=x2; |
| x2=x1; |
| x1=x0; |
| |
| } |
| if (g1==0) |
| { |
| /* OPT: Happens to work without the OPUS_MOVE(), but only because the current encoder already copies x to y */ |
| if (x!=y) |
| OPUS_MOVE(y+overlap, x+overlap, N-overlap); |
| return; |
| } |
| |
| /* Compute the part with the constant filter. */ |
| comb_filter_const(y+i, x+i, T1, N-i, g10, g11, g12, arch); |
| } |
| #endif /* OVERRIDE_comb_filter */ |
| |
| /* TF change table. Positive values mean better frequency resolution (longer |
| effective window), whereas negative values mean better time resolution |
| (shorter effective window). The second index is computed as: |
| 4*isTransient + 2*tf_select + per_band_flag */ |
| const signed char tf_select_table[4][8] = { |
| /*isTransient=0 isTransient=1 */ |
| {0, -1, 0, -1, 0,-1, 0,-1}, /* 2.5 ms */ |
| {0, -1, 0, -2, 1, 0, 1,-1}, /* 5 ms */ |
| {0, -2, 0, -3, 2, 0, 1,-1}, /* 10 ms */ |
| {0, -2, 0, -3, 3, 0, 1,-1}, /* 20 ms */ |
| }; |
| |
| |
| void init_caps(const CELTMode *m,int *cap,int LM,int C) |
| { |
| int i; |
| for (i=0;i<m->nbEBands;i++) |
| { |
| int N; |
| N=(m->eBands[i+1]-m->eBands[i])<<LM; |
| cap[i] = (m->cache.caps[m->nbEBands*(2*LM+C-1)+i]+64)*C*N>>2; |
| } |
| } |
| |
| |
| |
| const char *opus_strerror(int error) |
| { |
| static const char * const error_strings[8] = { |
| "success", |
| "invalid argument", |
| "buffer too small", |
| "internal error", |
| "corrupted stream", |
| "request not implemented", |
| "invalid state", |
| "memory allocation failed" |
| }; |
| if (error > 0 || error < -7) |
| return "unknown error"; |
| else |
| return error_strings[-error]; |
| } |
| |
| const char *opus_get_version_string(void) |
| { |
| return "libopus " PACKAGE_VERSION |
| /* Applications may rely on the presence of this substring in the version |
| string to determine if they have a fixed-point or floating-point build |
| at runtime. */ |
| #ifdef FIXED_POINT |
| "-fixed" |
| #endif |
| #ifdef FUZZING |
| "-fuzzing" |
| #endif |
| ; |
| } |