| /* |
| * Copyright (c) 2010 The WebM project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #ifndef VP10_ENCODER_SPEED_FEATURES_H_ |
| #define VP10_ENCODER_SPEED_FEATURES_H_ |
| |
| #include "vp10/common/enums.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| enum { |
| INTRA_ALL = (1 << DC_PRED) | |
| (1 << V_PRED) | (1 << H_PRED) | |
| (1 << D45_PRED) | (1 << D135_PRED) | |
| (1 << D117_PRED) | (1 << D153_PRED) | |
| (1 << D207_PRED) | (1 << D63_PRED) | |
| (1 << TM_PRED), |
| INTRA_DC = (1 << DC_PRED), |
| INTRA_DC_TM = (1 << DC_PRED) | (1 << TM_PRED), |
| INTRA_DC_H_V = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED), |
| INTRA_DC_TM_H_V = (1 << DC_PRED) | (1 << TM_PRED) | (1 << V_PRED) | |
| (1 << H_PRED) |
| }; |
| |
| enum { |
| INTER_ALL = (1 << NEARESTMV) | (1 << NEARMV) | (1 << ZEROMV) | (1 << NEWMV), |
| INTER_NEAREST = (1 << NEARESTMV), |
| INTER_NEAREST_NEW = (1 << NEARESTMV) | (1 << NEWMV), |
| INTER_NEAREST_ZERO = (1 << NEARESTMV) | (1 << ZEROMV), |
| INTER_NEAREST_NEW_ZERO = (1 << NEARESTMV) | (1 << ZEROMV) | (1 << NEWMV), |
| INTER_NEAREST_NEAR_NEW = (1 << NEARESTMV) | (1 << NEARMV) | (1 << NEWMV), |
| INTER_NEAREST_NEAR_ZERO = (1 << NEARESTMV) | (1 << NEARMV) | (1 << ZEROMV), |
| }; |
| |
| enum { |
| DISABLE_ALL_INTER_SPLIT = (1 << THR_COMP_GA) | |
| (1 << THR_COMP_LA) | |
| (1 << THR_ALTR) | |
| (1 << THR_GOLD) | |
| (1 << THR_LAST), |
| |
| DISABLE_ALL_SPLIT = (1 << THR_INTRA) | DISABLE_ALL_INTER_SPLIT, |
| |
| DISABLE_COMPOUND_SPLIT = (1 << THR_COMP_GA) | (1 << THR_COMP_LA), |
| |
| LAST_AND_INTRA_SPLIT_ONLY = (1 << THR_COMP_GA) | |
| (1 << THR_COMP_LA) | |
| (1 << THR_ALTR) | |
| (1 << THR_GOLD) |
| }; |
| |
| typedef enum { |
| DIAMOND = 0, |
| NSTEP = 1, |
| HEX = 2, |
| BIGDIA = 3, |
| SQUARE = 4, |
| FAST_HEX = 5, |
| FAST_DIAMOND = 6 |
| } SEARCH_METHODS; |
| |
| typedef enum { |
| // No recode. |
| DISALLOW_RECODE = 0, |
| // Allow recode for KF and exceeding maximum frame bandwidth. |
| ALLOW_RECODE_KFMAXBW = 1, |
| // Allow recode only for KF/ARF/GF frames. |
| ALLOW_RECODE_KFARFGF = 2, |
| // Allow recode for all frames based on bitrate constraints. |
| ALLOW_RECODE = 3, |
| } RECODE_LOOP_TYPE; |
| |
| typedef enum { |
| SUBPEL_TREE = 0, |
| SUBPEL_TREE_PRUNED = 1, // Prunes 1/2-pel searches |
| SUBPEL_TREE_PRUNED_MORE = 2, // Prunes 1/2-pel searches more aggressively |
| SUBPEL_TREE_PRUNED_EVENMORE = 3, // Prunes 1/2- and 1/4-pel searches |
| // Other methods to come |
| } SUBPEL_SEARCH_METHODS; |
| |
| typedef enum { |
| NO_MOTION_THRESHOLD = 0, |
| LOW_MOTION_THRESHOLD = 7 |
| } MOTION_THRESHOLD; |
| |
| typedef enum { |
| USE_FULL_RD = 0, |
| USE_LARGESTALL, |
| USE_TX_8X8 |
| } TX_SIZE_SEARCH_METHOD; |
| |
| typedef enum { |
| NOT_IN_USE = 0, |
| RELAXED_NEIGHBORING_MIN_MAX = 1, |
| STRICT_NEIGHBORING_MIN_MAX = 2 |
| } AUTO_MIN_MAX_MODE; |
| |
| typedef enum { |
| // Try the full image with different values. |
| LPF_PICK_FROM_FULL_IMAGE, |
| // Try a small portion of the image with different values. |
| LPF_PICK_FROM_SUBIMAGE, |
| // Estimate the level based on quantizer and frame type |
| LPF_PICK_FROM_Q, |
| // Pick 0 to disable LPF if LPF was enabled last frame |
| LPF_PICK_MINIMAL_LPF |
| } LPF_PICK_METHOD; |
| |
| typedef enum { |
| // Terminate search early based on distortion so far compared to |
| // qp step, distortion in the neighborhood of the frame, etc. |
| FLAG_EARLY_TERMINATE = 1 << 0, |
| |
| // Skips comp inter modes if the best so far is an intra mode. |
| FLAG_SKIP_COMP_BESTINTRA = 1 << 1, |
| |
| // Skips oblique intra modes if the best so far is an inter mode. |
| FLAG_SKIP_INTRA_BESTINTER = 1 << 3, |
| |
| // Skips oblique intra modes at angles 27, 63, 117, 153 if the best |
| // intra so far is not one of the neighboring directions. |
| FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4, |
| |
| // Skips intra modes other than DC_PRED if the source variance is small |
| FLAG_SKIP_INTRA_LOWVAR = 1 << 5, |
| } MODE_SEARCH_SKIP_LOGIC; |
| |
| typedef enum { |
| FLAG_SKIP_EIGHTTAP = 1 << EIGHTTAP, |
| FLAG_SKIP_EIGHTTAP_SMOOTH = 1 << EIGHTTAP_SMOOTH, |
| FLAG_SKIP_EIGHTTAP_SHARP = 1 << EIGHTTAP_SHARP, |
| } INTERP_FILTER_MASK; |
| |
| typedef enum { |
| // Search partitions using RD criterion |
| SEARCH_PARTITION, |
| |
| // Always use a fixed size partition |
| FIXED_PARTITION, |
| |
| REFERENCE_PARTITION, |
| |
| // Use an arbitrary partitioning scheme based on source variance within |
| // a 64X64 SB |
| VAR_BASED_PARTITION, |
| |
| // Use non-fixed partitions based on source variance |
| SOURCE_VAR_BASED_PARTITION |
| } PARTITION_SEARCH_TYPE; |
| |
| typedef enum { |
| // Does a dry run to see if any of the contexts need to be updated or not, |
| // before the final run. |
| TWO_LOOP = 0, |
| |
| // No dry run, also only half the coef contexts and bands are updated. |
| // The rest are not updated at all. |
| ONE_LOOP_REDUCED = 1 |
| } FAST_COEFF_UPDATE; |
| |
| typedef struct MV_SPEED_FEATURES { |
| // Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc). |
| SEARCH_METHODS search_method; |
| |
| // This parameter controls which step in the n-step process we start at. |
| // It's changed adaptively based on circumstances. |
| int reduce_first_step_size; |
| |
| // If this is set to 1, we limit the motion search range to 2 times the |
| // largest motion vector found in the last frame. |
| int auto_mv_step_size; |
| |
| // Subpel_search_method can only be subpel_tree which does a subpixel |
| // logarithmic search that keeps stepping at 1/2 pixel units until |
| // you stop getting a gain, and then goes on to 1/4 and repeats |
| // the same process. Along the way it skips many diagonals. |
| SUBPEL_SEARCH_METHODS subpel_search_method; |
| |
| // Maximum number of steps in logarithmic subpel search before giving up. |
| int subpel_iters_per_step; |
| |
| // Control when to stop subpel search |
| int subpel_force_stop; |
| |
| // This variable sets the step_param used in full pel motion search. |
| int fullpel_search_step_param; |
| } MV_SPEED_FEATURES; |
| |
| #define MAX_MESH_STEP 4 |
| |
| typedef struct MESH_PATTERN { |
| int range; |
| int interval; |
| } MESH_PATTERN; |
| |
| typedef struct SPEED_FEATURES { |
| MV_SPEED_FEATURES mv; |
| |
| // Frame level coding parameter update |
| int frame_parameter_update; |
| |
| RECODE_LOOP_TYPE recode_loop; |
| |
| // Trellis (dynamic programming) optimization of quantized values (+1, 0). |
| int optimize_coefficients; |
| |
| // Always set to 0. If on it enables 0 cost background transmission |
| // (except for the initial transmission of the segmentation). The feature is |
| // disabled because the addition of very large block sizes make the |
| // backgrounds very to cheap to encode, and the segmentation we have |
| // adds overhead. |
| int static_segmentation; |
| |
| // If 1 we iterate finding a best reference for 2 ref frames together - via |
| // a log search that iterates 4 times (check around mv for last for best |
| // error of combined predictor then check around mv for alt). If 0 we |
| // we just use the best motion vector found for each frame by itself. |
| BLOCK_SIZE comp_inter_joint_search_thresh; |
| |
| // This variable is used to cap the maximum number of times we skip testing a |
| // mode to be evaluated. A high value means we will be faster. |
| int adaptive_rd_thresh; |
| |
| // Speed feature to allow or disallow skipping of recode at block |
| // level within a frame. |
| int allow_skip_recode; |
| |
| // Coefficient probability model approximation step size |
| int coeff_prob_appx_step; |
| |
| // The threshold is to determine how slow the motino is, it is used when |
| // use_lastframe_partitioning is set to LAST_FRAME_PARTITION_LOW_MOTION |
| MOTION_THRESHOLD lf_motion_threshold; |
| |
| // Determine which method we use to determine transform size. We can choose |
| // between options like full rd, largest for prediction size, largest |
| // for intra and model coefs for the rest. |
| TX_SIZE_SEARCH_METHOD tx_size_search_method; |
| |
| // Low precision 32x32 fdct keeps everything in 16 bits and thus is less |
| // precise but significantly faster than the non lp version. |
| int use_lp32x32fdct; |
| |
| // After looking at the first set of modes (set by index here), skip |
| // checking modes for reference frames that don't match the reference frame |
| // of the best so far. |
| int mode_skip_start; |
| |
| PARTITION_SEARCH_TYPE partition_search_type; |
| |
| // Used if partition_search_type = FIXED_SIZE_PARTITION |
| BLOCK_SIZE always_this_block_size; |
| |
| // Skip rectangular partition test when partition type none gives better |
| // rd than partition type split. |
| int less_rectangular_check; |
| |
| // Disable testing non square partitions. (eg 16x32) |
| int use_square_partition_only; |
| |
| // Sets min and max partition sizes for this 64x64 region based on the |
| // same 64x64 in last encoded frame, and the left and above neighbor. |
| AUTO_MIN_MAX_MODE auto_min_max_partition_size; |
| // Ensures the rd based auto partition search will always |
| // go down at least to the specified level. |
| BLOCK_SIZE rd_auto_partition_min_limit; |
| |
| // Min and max partition size we enable (block_size) as per auto |
| // min max, but also used by adjust partitioning, and pick_partitioning. |
| BLOCK_SIZE default_min_partition_size; |
| BLOCK_SIZE default_max_partition_size; |
| |
| // Whether or not we allow partitions one smaller or one greater than the last |
| // frame's partitioning. Only used if use_lastframe_partitioning is set. |
| int adjust_partitioning_from_last_frame; |
| |
| // How frequently we re do the partitioning from scratch. Only used if |
| // use_lastframe_partitioning is set. |
| int last_partitioning_redo_frequency; |
| |
| // Disables sub 8x8 blocksizes in different scenarios: Choices are to disable |
| // it always, to allow it for only Last frame and Intra, disable it for all |
| // inter modes or to enable it always. |
| int disable_split_mask; |
| |
| // TODO(jingning): combine the related motion search speed features |
| // This allows us to use motion search at other sizes as a starting |
| // point for this motion search and limits the search range around it. |
| int adaptive_motion_search; |
| |
| // Flag for allowing some use of exhaustive searches; |
| int allow_exhaustive_searches; |
| |
| // Threshold for allowing exhaistive motion search. |
| int exhaustive_searches_thresh; |
| |
| // Maximum number of exhaustive searches for a frame. |
| int max_exaustive_pct; |
| |
| // Pattern to be used for any exhaustive mesh searches. |
| MESH_PATTERN mesh_patterns[MAX_MESH_STEP]; |
| |
| int schedule_mode_search; |
| |
| // Allows sub 8x8 modes to use the prediction filter that was determined |
| // best for 8x8 mode. If set to 0 we always re check all the filters for |
| // sizes less than 8x8, 1 means we check all filter modes if no 8x8 filter |
| // was selected, and 2 means we use 8 tap if no 8x8 filter mode was selected. |
| int adaptive_pred_interp_filter; |
| |
| // Adaptive prediction mode search |
| int adaptive_mode_search; |
| |
| // Chessboard pattern prediction filter type search |
| int cb_pred_filter_search; |
| |
| int cb_partition_search; |
| |
| int alt_ref_search_fp; |
| |
| // Fast quantization process path |
| int use_quant_fp; |
| |
| // Use finer quantizer in every other few frames that run variable block |
| // partition type search. |
| int force_frame_boost; |
| |
| // Maximally allowed base quantization index fluctuation. |
| int max_delta_qindex; |
| |
| // Implements various heuristics to skip searching modes |
| // The heuristics selected are based on flags |
| // defined in the MODE_SEARCH_SKIP_HEURISTICS enum |
| unsigned int mode_search_skip_flags; |
| |
| // A source variance threshold below which filter search is disabled |
| // Choose a very large value (UINT_MAX) to use 8-tap always |
| unsigned int disable_filter_search_var_thresh; |
| |
| // These bit masks allow you to enable or disable intra modes for each |
| // transform size separately. |
| int intra_y_mode_mask[TX_SIZES]; |
| int intra_uv_mode_mask[TX_SIZES]; |
| |
| // These bit masks allow you to enable or disable intra modes for each |
| // prediction block size separately. |
| int intra_y_mode_bsize_mask[BLOCK_SIZES]; |
| |
| // This variable enables an early break out of mode testing if the model for |
| // rd built from the prediction signal indicates a value that's much |
| // higher than the best rd we've seen so far. |
| int use_rd_breakout; |
| |
| // This enables us to use an estimate for intra rd based on dc mode rather |
| // than choosing an actual uv mode in the stage of encoding before the actual |
| // final encode. |
| int use_uv_intra_rd_estimate; |
| |
| // This feature controls how the loop filter level is determined. |
| LPF_PICK_METHOD lpf_pick; |
| |
| // This feature limits the number of coefficients updates we actually do |
| // by only looking at counts from 1/2 the bands. |
| FAST_COEFF_UPDATE use_fast_coef_updates; |
| |
| // A binary mask indicating if NEARESTMV, NEARMV, ZEROMV, NEWMV |
| // modes are used in order from LSB to MSB for each BLOCK_SIZE. |
| int inter_mode_mask[BLOCK_SIZES]; |
| |
| // This feature controls whether we do the expensive context update and |
| // calculation in the rd coefficient costing loop. |
| int use_fast_coef_costing; |
| |
| // This feature controls the tolerence vs target used in deciding whether to |
| // recode a frame. It has no meaning if recode is disabled. |
| int recode_tolerance; |
| |
| // This variable controls the maximum block size where intra blocks can be |
| // used in inter frames. |
| // TODO(aconverse): Fold this into one of the other many mode skips |
| BLOCK_SIZE max_intra_bsize; |
| |
| // The frequency that we check if SOURCE_VAR_BASED_PARTITION or |
| // FIXED_PARTITION search type should be used. |
| int search_type_check_frequency; |
| |
| // When partition is pre-set, the inter prediction result from pick_inter_mode |
| // can be reused in final block encoding process. It is enabled only for real- |
| // time mode speed 6. |
| int reuse_inter_pred_sby; |
| |
| // This variable sets the encode_breakout threshold. Currently, it is only |
| // enabled in real time mode. |
| int encode_breakout_thresh; |
| |
| // default interp filter choice |
| INTERP_FILTER default_interp_filter; |
| |
| // Early termination in transform size search, which only applies while |
| // tx_size_search_method is USE_FULL_RD. |
| int tx_size_search_breakout; |
| |
| // adaptive interp_filter search to allow skip of certain filter types. |
| int adaptive_interp_filter_search; |
| |
| // mask for skip evaluation of certain interp_filter type. |
| INTERP_FILTER_MASK interp_filter_search_mask; |
| |
| // Partition search early breakout thresholds. |
| int64_t partition_search_breakout_dist_thr; |
| int partition_search_breakout_rate_thr; |
| |
| // Allow skipping partition search for still image frame |
| int allow_partition_search_skip; |
| |
| // Fast approximation of vp10_model_rd_from_var_lapndz |
| int simple_model_rd_from_var; |
| } SPEED_FEATURES; |
| |
| struct VP10_COMP; |
| |
| void vp10_set_speed_features_framesize_independent(struct VP10_COMP *cpi); |
| void vp10_set_speed_features_framesize_dependent(struct VP10_COMP *cpi); |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // VP10_ENCODER_SPEED_FEATURES_H_ |