| // Copyright 2016 The Cobalt Authors. All Rights Reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #ifndef STARBOARD_CONTRIB_TIZEN_ARMV7L_CONFIGURATION_PUBLIC_H_ |
| #define STARBOARD_CONTRIB_TIZEN_ARMV7L_CONFIGURATION_PUBLIC_H_ |
| |
| // The API version implemented by this platform. |
| #define SB_API_VERSION 10 |
| |
| // The tizen policy version |
| #define SB_TIZEN_POLICY_VERSION 4 |
| |
| #define SB_HAS_ON_SCREEN_KEYBOARD 0 |
| #define SB_HAS_PLAYER_WITH_URL 0 |
| #define SB_HAS_ASYNC_AUDIO_FRAMES_REPORTING 0 |
| |
| // --- Architecture Configuration -------------------------------------------- |
| |
| // Whether the current platform is big endian. SB_IS_LITTLE_ENDIAN will be |
| // automatically set based on this. |
| #define SB_IS_BIG_ENDIAN 0 |
| |
| // Whether the current platform is an ARM architecture. |
| #define SB_IS_ARCH_ARM 1 |
| |
| // Whether the current platform is an x86 architecture. |
| #define SB_IS_ARCH_X86 0 |
| |
| // Whether the current platform is a 32-bit architecture. |
| #define SB_IS_32_BIT 1 |
| |
| #define SB_IS_64_BIT 0 |
| // Whether the current platform's pointers are 32-bit. |
| // Whether the current platform's longs are 32-bit. |
| #if SB_IS(32_BIT) |
| #define SB_HAS_32_BIT_POINTERS 1 |
| #define SB_HAS_32_BIT_LONG 1 |
| #else |
| #define SB_HAS_32_BIT_POINTERS 0 |
| #define SB_HAS_32_BIT_LONG 0 |
| #endif |
| |
| // Whether the current platform's pointers are 64-bit. |
| // Whether the current platform's longs are 64-bit. |
| #if SB_IS(64_BIT) |
| #define SB_HAS_64_BIT_POINTERS 1 |
| #define SB_HAS_64_BIT_LONG 1 |
| #else |
| #define SB_HAS_64_BIT_POINTERS 0 |
| #define SB_HAS_64_BIT_LONG 0 |
| #endif |
| |
| // Configuration parameters that allow the application to make some general |
| // compile-time decisions with respect to the the number of cores likely to be |
| // available on this platform. For a definitive measure, the application should |
| // still call SbSystemGetNumberOfProcessors at runtime. |
| |
| // Whether the current platform's thread scheduler will automatically balance |
| // threads between cores, as opposed to systems where threads will only ever run |
| // on the specifically pinned core. |
| #define SB_HAS_CROSS_CORE_SCHEDULER 1 |
| |
| // --- I/O Configuration ----------------------------------------------------- |
| |
| // Whether the current platform has microphone supported. |
| #define SB_HAS_MICROPHONE 1 |
| |
| // Whether the current platform has speech recognizer. |
| #define SB_HAS_SPEECH_RECOGNIZER 0 |
| |
| // Whether the current platform has speech synthesis. |
| #define SB_HAS_SPEECH_SYNTHESIS 0 |
| |
| // --- Media Configuration --------------------------------------------------- |
| |
| // Specifies whether this platform has support for a possibly-decrypting |
| // elementary stream player for at least H.264/AAC (and AES-128-CTR, if |
| // decrypting). A player is responsible for ingesting an audio and video |
| // elementary stream, optionally-encrypted, and ultimately producing |
| // synchronized audio/video. If a player is defined, it must choose one of the |
| // supported composition methods below. |
| #define SB_HAS_PLAYER 1 |
| |
| // The maximum audio bitrate the platform can decode. The following value |
| // equals to 2M bytes per seconds which is more than enough for compressed |
| // audio. |
| #define SB_MEDIA_MAX_AUDIO_BITRATE_IN_BITS_PER_SECOND (16 * 1024 * 1024) |
| |
| // The maximum video bitrate the platform can decode. The following value |
| // equals to 25M bytes per seconds which is more than enough for compressed |
| // video. |
| #define SB_MEDIA_MAX_VIDEO_BITRATE_IN_BITS_PER_SECOND (200 * 1024 * 1024) |
| |
| // Specifies whether this platform has webm/vp9 support. This should be set to |
| // non-zero on platforms with webm/vp9 support. |
| #define SB_HAS_MEDIA_WEBM_VP9_SUPPORT 0 |
| |
| // Specifies the stack size for threads created inside media stack. Set to 0 to |
| // use the default thread stack size. Set to non-zero to explicitly set the |
| // stack size for media stack threads. |
| #define SB_MEDIA_THREAD_STACK_SIZE 0U |
| |
| // --- Decoder-only Params --- |
| |
| // Specifies how media buffers must be aligned on this platform as some |
| // decoders may have special requirement on the alignment of buffers being |
| // decoded. |
| #define SB_MEDIA_BUFFER_ALIGNMENT 128U |
| |
| // Specifies how video frame buffers must be aligned on this platform. |
| #define SB_MEDIA_VIDEO_FRAME_ALIGNMENT 256U |
| |
| // The encoded video frames are compressed in different ways, their decoding |
| // time can vary a lot. Occasionally a single frame can take longer time to |
| // decode than the average time per frame. The player has to cache some frames |
| // to account for such inconsistency. The number of frames being cached are |
| // controlled by the following two macros. |
| // |
| // Specify the number of video frames to be cached before the playback starts. |
| // Note that set this value too large may increase the playback start delay. |
| #define SB_MEDIA_MAXIMUM_VIDEO_PREROLL_FRAMES 4 |
| |
| // Specify the number of video frames to be cached during playback. A large |
| // value leads to more stable fps but also causes the app to use more memory. |
| #define SB_MEDIA_MAXIMUM_VIDEO_FRAMES 12 |
| |
| // --- Timing API ------------------------------------------------------------ |
| |
| // Whether this platform has an API to retrieve how long the current thread |
| // has spent in the executing state. |
| #define SB_HAS_TIME_THREAD_NOW 1 |
| |
| // --- Common Configuration --------------------------------------------------- |
| |
| // Include the Tizen configuration that's common between all Tizen. |
| #include "starboard/contrib/tizen/shared/configuration_public.h" |
| |
| // --- User Configuration ---------------------------------------------------- |
| |
| // The maximum number of users that can be signed in at the same time. |
| #undef SB_USER_MAX_SIGNED_IN |
| #define SB_USER_MAX_SIGNED_IN 1 |
| |
| #endif // STARBOARD_CONTRIB_TIZEN_ARMV7L_CONFIGURATION_PUBLIC_H_ |