| // Copyright 2018 the V8 project authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "src/codegen/assembler-inl.h" |
| #include "src/codegen/macro-assembler-inl.h" |
| #include "src/execution/simulator.h" |
| #include "src/handles/handles-inl.h" |
| #include "test/cctest/cctest.h" |
| #include "test/common/assembler-tester.h" |
| |
| namespace v8 { |
| namespace internal { |
| namespace test_icache { |
| |
| using F0 = int(int); |
| |
| #define __ masm. |
| |
| static constexpr int kNumInstr = 100; |
| static constexpr int kNumIterations = 5; |
| static constexpr int kBufferSize = 8 * KB; |
| |
| static void FloodWithInc(Isolate* isolate, TestingAssemblerBuffer* buffer) { |
| MacroAssembler masm(isolate, CodeObjectRequired::kYes, buffer->CreateView()); |
| #if V8_TARGET_ARCH_IA32 |
| __ mov(eax, Operand(esp, kSystemPointerSize)); |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ add(eax, Immediate(1)); |
| } |
| #elif V8_TARGET_ARCH_X64 |
| __ movl(rax, arg_reg_1); |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ addl(rax, Immediate(1)); |
| } |
| #elif V8_TARGET_ARCH_ARM64 |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ Add(x0, x0, Operand(1)); |
| } |
| #elif V8_TARGET_ARCH_ARM |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ add(r0, r0, Operand(1)); |
| } |
| #elif V8_TARGET_ARCH_MIPS |
| __ mov(v0, a0); |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ Addu(v0, v0, Operand(1)); |
| } |
| #elif V8_TARGET_ARCH_MIPS64 |
| __ mov(v0, a0); |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ Addu(v0, v0, Operand(1)); |
| } |
| #elif V8_TARGET_ARCH_PPC |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ addi(r3, r3, Operand(1)); |
| } |
| #elif V8_TARGET_ARCH_S390 |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ agfi(r2, Operand(1)); |
| } |
| #else |
| #error Unsupported architecture |
| #endif |
| __ Ret(); |
| CodeDesc desc; |
| masm.GetCode(isolate, &desc); |
| } |
| |
| static void FloodWithNop(Isolate* isolate, TestingAssemblerBuffer* buffer) { |
| MacroAssembler masm(isolate, CodeObjectRequired::kYes, buffer->CreateView()); |
| #if V8_TARGET_ARCH_IA32 |
| __ mov(eax, Operand(esp, kSystemPointerSize)); |
| #elif V8_TARGET_ARCH_X64 |
| __ movl(rax, arg_reg_1); |
| #elif V8_TARGET_ARCH_MIPS |
| __ mov(v0, a0); |
| #elif V8_TARGET_ARCH_MIPS64 |
| __ mov(v0, a0); |
| #endif |
| for (int i = 0; i < kNumInstr; ++i) { |
| __ nop(); |
| } |
| __ Ret(); |
| CodeDesc desc; |
| masm.GetCode(isolate, &desc); |
| } |
| |
| // Order of operation for this test case: |
| // exec -> perm(RW) -> patch -> flush -> perm(RX) -> exec |
| TEST(TestFlushICacheOfWritable) { |
| Isolate* isolate = CcTest::i_isolate(); |
| HandleScope handles(isolate); |
| |
| for (int i = 0; i < kNumIterations; ++i) { |
| auto buffer = AllocateAssemblerBuffer(kBufferSize); |
| |
| // Allow calling the function from C++. |
| auto f = GeneratedCode<F0>::FromBuffer(isolate, buffer->start()); |
| |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadWrite)); |
| FloodWithInc(isolate, buffer.get()); |
| FlushInstructionCache(buffer->start(), buffer->size()); |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadExecute)); |
| CHECK_EQ(23 + kNumInstr, f.Call(23)); // Call into generated code. |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadWrite)); |
| FloodWithNop(isolate, buffer.get()); |
| FlushInstructionCache(buffer->start(), buffer->size()); |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadExecute)); |
| CHECK_EQ(23, f.Call(23)); // Call into generated code. |
| } |
| } |
| |
| #if V8_TARGET_ARCH_ARM || V8_TARGET_ARCH_ARM64 |
| // Note that this order of operations is not supported on ARM32/64 because on |
| // some older ARM32/64 kernels there is a bug which causes an access error on |
| // cache flush instructions to trigger access error on non-writable memory. |
| // See https://bugs.chromium.org/p/v8/issues/detail?id=8157 |
| // |
| // Also note that this requires {kBufferSize == 8 * KB} to reproduce. |
| // |
| // The order of operations in V8 is akin to {TestFlushICacheOfWritable} above. |
| // It is hence OK to disable the below test on some architectures. Only the |
| // above test case should remain enabled on all architectures. |
| #define CONDITIONAL_TEST DISABLED_TEST |
| #else |
| #define CONDITIONAL_TEST TEST |
| #endif |
| |
| // Order of operation for this test case: |
| // exec -> perm(RW) -> patch -> perm(RX) -> flush -> exec |
| CONDITIONAL_TEST(TestFlushICacheOfExecutable) { |
| Isolate* isolate = CcTest::i_isolate(); |
| HandleScope handles(isolate); |
| |
| for (int i = 0; i < kNumIterations; ++i) { |
| auto buffer = AllocateAssemblerBuffer(kBufferSize); |
| |
| // Allow calling the function from C++. |
| auto f = GeneratedCode<F0>::FromBuffer(isolate, buffer->start()); |
| |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadWrite)); |
| FloodWithInc(isolate, buffer.get()); |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadExecute)); |
| FlushInstructionCache(buffer->start(), buffer->size()); |
| CHECK_EQ(23 + kNumInstr, f.Call(23)); // Call into generated code. |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadWrite)); |
| FloodWithNop(isolate, buffer.get()); |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadExecute)); |
| FlushInstructionCache(buffer->start(), buffer->size()); |
| CHECK_EQ(23, f.Call(23)); // Call into generated code. |
| } |
| } |
| |
| #undef CONDITIONAL_TEST |
| |
| // Order of operation for this test case: |
| // perm(RWX) -> exec -> patch -> flush -> exec |
| TEST(TestFlushICacheOfWritableAndExecutable) { |
| Isolate* isolate = CcTest::i_isolate(); |
| HandleScope handles(isolate); |
| |
| for (int i = 0; i < kNumIterations; ++i) { |
| auto buffer = AllocateAssemblerBuffer(kBufferSize); |
| |
| // Allow calling the function from C++. |
| auto f = GeneratedCode<F0>::FromBuffer(isolate, buffer->start()); |
| |
| CHECK(SetPermissions(GetPlatformPageAllocator(), buffer->start(), |
| buffer->size(), v8::PageAllocator::kReadWriteExecute)); |
| FloodWithInc(isolate, buffer.get()); |
| FlushInstructionCache(buffer->start(), buffer->size()); |
| CHECK_EQ(23 + kNumInstr, f.Call(23)); // Call into generated code. |
| FloodWithNop(isolate, buffer.get()); |
| FlushInstructionCache(buffer->start(), buffer->size()); |
| CHECK_EQ(23, f.Call(23)); // Call into generated code. |
| } |
| } |
| |
| #undef __ |
| |
| } // namespace test_icache |
| } // namespace internal |
| } // namespace v8 |