blob: daa66ef6c5226736a034d0bc43246b3c7f2c1b48 [file] [log] [blame]
# Copyright (C) 2016 and later: Unicode, Inc. and others.
# License & terms of use: http://www.unicode.org/copyright.html
#**********************************************************************
#* Copyright (C) 1999-2016, International Business Machines Corporation
#* and others. All Rights Reserved.
#**********************************************************************
# nmake file for creating data files on win32
# invoke with
# nmake /f makedata.mak icumake=$(ProjectDir)
#
# 12/10/1999 weiv Created
##############################################################################
# Keep the following in sync with the version - see common/unicode/uvernum.h
U_ICUDATA_NAME=icudt68
##############################################################################
!IF "$(UWP)" == "UWP"
# Optionally change the name of the data file for the UWP version.
U_ICUDATA_NAME=icudt68
!ENDIF
U_ICUDATA_ENDIAN_SUFFIX=l
UNICODE_VERSION=13.0
ICU_LIB_TARGET=$(DLL_OUTPUT)\$(U_ICUDATA_NAME).dll
# ICUMAKE
# Must be provided by whoever runs this makefile.
# Is the directory containing this file (makedata.mak)
# Is the directory into which most data is built (prior to packaging)
# Is icu\source\data\
#
!IF "$(ICUMAKE)"==""
!ERROR Can't find ICUMAKE (ICU Data Make dir, should point to icu\source\data\ )!
!ENDIF
!MESSAGE ICU data make path is $(ICUMAKE)
!IF [py -3 -c "exit(0)"]!=0
!MESSAGE Information: Unable to find Python 3. Data will fail to build from source.
!ENDIF
# Suffixes for data files
.SUFFIXES : .nrm .icu .ucm .cnv .dll .dat .res .txt .c
ICUOUT=$(ICUMAKE)\out
# the prefix "icudt62_" for use in filenames
ICUPKG=$(U_ICUDATA_NAME)$(U_ICUDATA_ENDIAN_SUFFIX)
# need to nuke \\ for .NET...
ICUOUT=$(ICUOUT:\\=\)
ICUBLD=$(ICUOUT)\build
ICUBLD_PKG=$(ICUBLD)\$(ICUPKG)
ICUTMP=$(ICUOUT)\tmp
# ICUP
# The root of the ICU source directory tree
#
ICUP=$(ICUMAKE)\..\..
ICUP=$(ICUP:\source\data\..\..=)
# In case the first one didn't do it, try this one. .NET would do the second one.
ICUP=$(ICUP:\source\data\\..\..=)
!MESSAGE ICU root path is $(ICUP)
# ICUSRCDATA
# The data directory in source
#
ICUSRCDATA=$(ICUP)\source\data
ICUSRCDATA_RELATIVE_PATH=..\..\..
# Timestamp files to keep track of current build state
TOOLS_TS=$(ICUTMP)\tools.timestamp
COREDATA_TS=$(ICUTMP)\coredata.timestamp
ARM_CROSSBUILD_TS=
# ICUCOL
# The directory that contains colfiles.mk files along with *.txt collation data files
#
ICUCOL=coll
# ICURBNF
# The directory that contains rbnffiles.mk files along with *.txt RBNF data files
#
ICURBNF=rbnf
# ICUTRNS
# The directory that contains trfiles.mk files along with *.txt transliterator files
#
ICUTRNS=translit
# ICUBRK
# The directory that contains resfiles.mk files along with *.txt break iterator files
#
ICUBRK=brkitr
#
# ICUDATA
# The source directory. Contains the source files for the common data to be built.
# WARNING: NOT THE SAME AS ICU_DATA environment variable. Confusing.
ICUDATA=$(ICUP)\source\data
#
# DLL_OUTPUT
# Destination directory for the common data DLL file.
# This is the same place that all of the other ICU DLLs go (the code-containing DLLs)
# The lib file for the data DLL goes in $(DLL_OUTPUT)/../lib/
#
!IF "$(CFG)" == "ARM\Release" || "$(CFG)" == "ARM\Debug"
DLL_OUTPUT=$(ICUP)\binARM$(UWP)
!ELSE IF "$(CFG)" == "ARM64\Release" || "$(CFG)" == "ARM64\Debug"
DLL_OUTPUT=$(ICUP)\binARM64$(UWP)
!ELSE IF "$(CFG)" == "x64\Release" || "$(CFG)" == "x64\Debug"
DLL_OUTPUT=$(ICUP)\bin64$(UWP)
!ELSE IF "$(UWP)" == "UWP"
DLL_OUTPUT=$(ICUP)\bin32$(UWP)
!ELSE
DLL_OUTPUT=$(ICUP)\bin$(UWP)
!ENDIF
!MESSAGE ICU data DLL_OUTPUT path is $(DLL_OUTPUT)
#
# TESTDATA
# The source directory for data needed for test programs.
TESTDATA=$(ICUP)\source\test\testdata
#
# TESTDATAOUT
# The destination directory for the built test data .dat file
TESTDATAOUT=$(ICUP)\source\test\testdata\out
#
# TESTDATABLD
# The build directory for test data intermediate files
# (Tests are NOT run from this makefile,
# only the data is put in place.)
TESTDATABLD=$(ICUP)\source\test\testdata\out\build
#
# ICUTOOLS
# Directory under which all of the ICU data building tools live.
#
ICUTOOLS=$(ICUP)\source\tools
!MESSAGE ICU tools path is $(ICUTOOLS)
# ARM_CROSS_BUILD
# In order to support cross-compiling for ARM/ARM64 using the x64 tools
# we need to know if we're building the ARM/ARM64 data DLL, otherwise
# the existence of the x64 bits will cause us to think we are already done.
# Note: This is only for the "regular" builds, the UWP builds have a separate project file entirely.
ARM_CROSS_BUILD=
!IF "$(UWP)" == ""
!IF "$(CFG)" == "ARM\Release" || "$(CFG)" == "ARM\Debug"
ARM_CROSS_BUILD=ARM
ARM_CROSSBUILD_TS=$(ICUTMP)\$(ARM_CROSS_BUILD).timestamp
!ELSE IF "$(CFG)" == "ARM64\Release" || "$(CFG)" == "ARM64\Debug"
ARM_CROSS_BUILD=ARM64
ARM_CROSSBUILD_TS=$(ICUTMP)\$(ARM_CROSS_BUILD).timestamp
!ENDIF
!ENDIF
#
# TOOLS CFG PATH
# Generally the tools want to run on the same architecture as is being built.
# Thus ARM and ARM64 need to use another build of the other tools, so make sure to get an usable CFG path.
# Since tools, particularly pkggen, have architecture built-in, we made x64 on
# Windows be machine-independent and use those tools for both ARM and ARM64.
# Note: If we're building ARM/ARM64 Debug, then we'll use the x64 Debug tools.
# If we're building ARM/ARM64 Release, then we'll use the x64 Release tools.
#
!IF "$(ARM_CROSS_BUILD)" == ""
CFGTOOLS=$(CFG)
!ELSE
!IF "$(CFG)" == "ARM\Release" || "$(CFG)" == "ARM64\Release"
CFGTOOLS=x64\Release
!ENDIF
!IF "$(CFG)" == "ARM\Debug" || "$(CFG)" == "ARM64\Debug"
CFGTOOLS=x64\Debug
!ENDIF
!ENDIF
!MESSAGE ICU tools CFG subpath is $(CFGTOOLS)
# The current ICU tools need to be in the path first.
# x86 uses x86; x64, arm, and arm64 use x64
!IF "$(CFG)" == "x86\Release" || "$(CFG)" == "x86\Debug"
PATH = $(ICUP)\bin;$(PATH)
ICUPBIN=$(ICUP)\bin
!ELSE
PATH = $(ICUP)\bin64;$(PATH)
ICUPBIN=$(ICUP)\bin64
!ENDIF
# This variable can be overridden to "-m static" by the project settings,
# if you want a static data library.
!IF "$(ICU_PACKAGE_MODE)"==""
ICU_PACKAGE_MODE=-m dll
!ENDIF
# If this archive exists, build from that
# instead of building everything from scratch.
ICUDATA_SOURCE_ARCHIVE=$(ICUSRCDATA)\in\$(ICUPKG).dat
!IF !EXISTS("$(ICUDATA_SOURCE_ARCHIVE)")
# Does a big endian version exist either?
ICUDATA_ARCHIVE=$(ICUSRCDATA)\in\$(U_ICUDATA_NAME)b.dat
!IF EXISTS("$(ICUDATA_ARCHIVE)")
ICUDATA_SOURCE_ARCHIVE=$(ICUTMP)\$(ICUPKG).dat
!ELSE
# Nothing was usable for input
!UNDEF ICUDATA_SOURCE_ARCHIVE
!ENDIF
!ENDIF
!IFDEF ICUDATA_SOURCE_ARCHIVE
!MESSAGE ICU data source archive is $(ICUDATA_SOURCE_ARCHIVE)
!ENDIF
# Common defines for both ways of building ICU's data library.
COMMON_ICUDATA_DEPENDENCIES="$(ICUPBIN)\pkgdata.exe" "$(ICUTMP)\icudata.res" "$(ICUP)\source\stubdata\stubdatabuilt.txt"
COMMON_ICUDATA_ARGUMENTS=-f -e $(U_ICUDATA_NAME) -v $(ICU_PACKAGE_MODE) -c -p $(ICUPKG) -T "$(ICUTMP)" -L $(U_ICUDATA_NAME) -d "$(ICUBLD_PKG)" -s .
!IF "$(UWP)" == "UWP"
COMMON_ICUDATA_ARGUMENTS=$(COMMON_ICUDATA_ARGUMENTS) -u
!ENDIF
!IF "$(CFG)" == "x64\Release" || "$(CFG)" == "x64\Debug"
COMMON_ICUDATA_ARGUMENTS=$(COMMON_ICUDATA_ARGUMENTS) -a X64
!ENDIF
!IF "$(CFG)" == "ARM\Release" || "$(CFG)" == "ARM\Debug"
COMMON_ICUDATA_ARGUMENTS=$(COMMON_ICUDATA_ARGUMENTS) -a ARM
!ENDIF
!IF "$(CFG)" == "ARM64\Release" || "$(CFG)" == "ARM64\Debug"
COMMON_ICUDATA_ARGUMENTS=$(COMMON_ICUDATA_ARGUMENTS) -a ARM64
!ENDIF
#############################################################################
#
# ALL
# This target builds all the data files. The world starts here.
# Note: we really want the common data dll to go to $(DLL_OUTPUT), not $(ICUBLD_PKG). But specifying
# that here seems to cause confusion with the building of the stub library of the same name.
# Building the common dll in $(ICUBLD_PKG) unconditionally copies it to $(DLL_OUTPUT) too.
#
#############################################################################
!IF "$(ARM_CROSS_BUILD)" == ""
ALL : GODATA "$(ICU_LIB_TARGET)" "$(TESTDATAOUT)\testdata.dat"
@echo All targets are up to date
!IF "$(UWP)" == "UWP"
@if not exist "$(ICUMAKE)\..\..\commondata\" mkdir "$(ICUMAKE)\..\..\commondata\"
copy "$(ICUOUT)\$(U_ICUDATA_NAME)$(U_ICUDATA_ENDIAN_SUFFIX).dat" "$(ICUMAKE)\..\..\commondata\"
!ENDIF
!ELSE
ALL : GODATA "$(ICU_LIB_TARGET)" "$(TESTDATAOUT)\testdata.dat" $(ARM_CROSSBUILD_TS)
@echo All targets are up to date
!ENDIF
# Verbose output when building the data for Debug builds.
!IF "$(DEBUG)" == "true"
ICU_DATA_BUILD_VERBOSE=--verbose
!ELSE
ICU_DATA_BUILD_VERBOSE=
!ENDIF
# Three main targets: tools, core data, and test data.
# Keep track of whether they are built via timestamp files.
$(TOOLS_TS): "$(ICUTOOLS)\genrb\$(CFGTOOLS)\genrb.exe" "$(ICUTOOLS)\gencnval\$(CFGTOOLS)\gencnval.exe" "$(ICUTOOLS)\gencfu\$(CFGTOOLS)\gencfu.exe" "$(ICUTOOLS)\icupkg\$(CFGTOOLS)\icupkg.exe" "$(ICUTOOLS)\makeconv\$(CFGTOOLS)\makeconv.exe" "$(ICUPBIN)\pkgdata.exe"
@echo "timestamp" > $(TOOLS_TS)
# On Unix, Python generates at configure time a list of Makefile rules.
# On Windows, however, we run the Python data build script at build time instead.
# The alternative would be to use a preprocessor macro to generate rules for nmake.
# However, this approach was abandoned for reasons including:
#
# - nmake imposes more stringent restrictions on command line length.
# - The lack of gnumake features makes nmake file construction more complex.
# - Windows builds are single-threaded, giving less advantage to a Makefile approach.
#
# Currently, the entire script needs to run even for small changes to data. Maybe consider
# checking file-changed timestamps in Python to build only the required subset of data.
$(COREDATA_TS):
@cd "$(ICUSRCDATA)"
set PYTHONPATH=$(ICUP)\source\python;%PYTHONPATH%
py -3 -B -m icutools.databuilder \
--mode windows-exec \
--src_dir "$(ICUSRCDATA)" \
--tool_dir "$(ICUTOOLS)" \
--tool_cfg "$(CFGTOOLS)" \
--out_dir "$(ICUBLD_PKG)" \
--tmp_dir "$(ICUTMP)" \
--filter_file "$(ICU_DATA_FILTER_FILE)" \
$(ICU_DATA_BUILD_VERBOSE) \
$(ICU_DATA_BUILDTOOL_OPTS)
@echo "timestamp" > $(COREDATA_TS)
# The core Unicode properties files (uprops.icu, ucase.icu, ubidi.icu)
# are hardcoded in the common DLL and therefore not included in the data package any more.
# They are not built by default but need to be built for ICU4J data and for getting the .c source files
# when updating the Unicode data.
# Changed in makedata.mak revision 1.117. See Jitterbug 4497.
# 2010-dec Removed pnames.icu.
# Command line:
# C:\svn\icuproj\icu\trunk\source\data>nmake -f makedata.mak ICUMAKE=C:\svn\icuproj\icu\trunk\source\data\ CFG=x86\Debug uni-core-data
uni-core-data: GODATA "$(ICUBLD_PKG)\pnames.icu" "$(ICUBLD_PKG)\uprops.icu" "$(ICUBLD_PKG)\ucase.icu" "$(ICUBLD_PKG)\ubidi.icu" "$(ICUBLD_PKG)\nfc.nrm"
@echo Unicode .icu files built to "$(ICUBLD_PKG)"
# Build the ICU4J icudata.jar and testdata.jar.
# see icu4j-readme.txt
ICU4J_TZDATA="$(ICUOUT)\icu4j\icutzdata.jar"
ICU4J_DATA_DIRNAME=com\ibm\icu\impl\data\$(U_ICUDATA_NAME)b
ICU4J_TZDATA_PATHS=$(ICU4J_DATA_DIRNAME)\zoneinfo64.res $(ICU4J_DATA_DIRNAME)\metaZones.res $(ICU4J_DATA_DIRNAME)\timezoneTypes.res $(ICU4J_DATA_DIRNAME)\windowsZones.res
generate-data: GODATA "$(ICUOUT)\$(ICUPKG).dat" uni-core-data
if not exist "$(ICUOUT)\icu4j\$(ICU4J_DATA_DIRNAME)" mkdir "$(ICUOUT)\icu4j\$(ICU4J_DATA_DIRNAME)"
if not exist "$(ICUOUT)\icu4j\tzdata\$(ICU4J_DATA_DIRNAME)" mkdir "$(ICUOUT)\icu4j\tzdata\$(ICU4J_DATA_DIRNAME)"
echo pnames.icu ubidi.icu ucase.icu uprops.icu nfc.nrm > "$(ICUOUT)\icu4j\add.txt"
"$(ICUPBIN)\icupkg" "$(ICUOUT)\$(ICUPKG).dat" "$(ICUOUT)\icu4j\$(U_ICUDATA_NAME)b.dat" -a "$(ICUOUT)\icu4j\add.txt" -s "$(ICUBLD_PKG)" -x * -tb -d "$(ICUOUT)\icu4j\$(ICU4J_DATA_DIRNAME)"
@for %f in ($(ICU4J_TZDATA_PATHS)) do @move "$(ICUOUT)\icu4j\%f" "$(ICUOUT)\icu4j\tzdata\$(ICU4J_DATA_DIRNAME)"
"$(ICUOUT)\icu4j\icutzdata.jar": GODATA generate-data
"$(JAR)" cf "$(ICUOUT)\icu4j\icutzdata.jar" -C "$(ICUOUT)\icu4j\tzdata" "$(ICU4J_DATA_DIRNAME)"
# Build icudata.jar:
# - add the uni-core-data to the ICU package
# - swap the ICU data
# - extract all data items
# - package them into the .jar file
"$(ICUOUT)\icu4j\icudata.jar": GODATA generate-data
"$(JAR)" cf "$(ICUOUT)\icu4j\icudata.jar" -C "$(ICUOUT)\icu4j" "$(ICU4J_DATA_DIRNAME)"
# Build testdata.jar:
# - swap the test data
# - extract all data items
# - package them into the .jar file
"$(ICUOUT)\icu4j\testdata.jar": GODATA "$(TESTDATAOUT)\testdata.dat"
if not exist "$(ICUOUT)\icu4j\com\ibm\icu\dev\data\testdata" mkdir "$(ICUOUT)\icu4j\com\ibm\icu\dev\data\testdata"
"$(ICUPBIN)\icupkg" "$(TESTDATAOUT)\testdata.dat" -r test.icu -x * -tb -d "$(ICUOUT)\icu4j\com\ibm\icu\dev\data\testdata"
"$(JAR)" cf "$(ICUOUT)\icu4j\testdata.jar" -C "$(ICUOUT)\icu4j" com\ibm\icu\dev\data\testdata
## Compare to: source\data\Makefile.in and source\test\testdata\Makefile.in
DEBUGUTILITIESDATA_DIR=main\tests\core\src\com\ibm\icu\dev\test\util
DEBUGUTILITIESDATA_SRC=DebugUtilitiesData.java
# Build DebugUtilitiesData.java
"$(ICUOUT)\icu4j\src\$(DEBUGUTILITIESDATA_DIR)\$(DEBUGUTILITIESDATA_SRC)" : {"$(ICUTOOLS)\gentest\$(CFGTOOLS)"}gentest.exe
if not exist "$(ICUOUT)\icu4j\src\$(DEBUGUTILITIESDATA_DIR)" mkdir "$(ICUOUT)\icu4j\src\$(DEBUGUTILITIESDATA_DIR)"
"$(ICUTOOLS)\gentest\$(CFGTOOLS)\gentest" -j -d"$(ICUOUT)\icu4j\src\$(DEBUGUTILITIESDATA_DIR)"
ICU4J_DATA="$(ICUOUT)\icu4j\icudata.jar" "$(ICUOUT)\icu4j\testdata.jar" "$(ICUOUT)\icu4j\src\$(DEBUGUTILITIESDATA_DIR)\$(DEBUGUTILITIESDATA_SRC)"
icu4j-data: GODATA $(ICU4J_DATA) $(ICU4J_TZDATA)
!IFDEF ICU4J_ROOT
"$(ICU4J_ROOT)\main\shared\data\icudata.jar": "$(ICUOUT)\icu4j\icudata.jar"
if not exist "$(ICU4J_ROOT)\main\shared\data" mkdir "$(ICU4J_ROOT)\main\shared\data"
copy "$(ICUOUT)\icu4j\icudata.jar" "$(ICU4J_ROOT)\main\shared\data"
"$(ICU4J_ROOT)\main\shared\data\icutzdata.jar": "$(ICUOUT)\icu4j\icutzdata.jar"
if not exist "$(ICU4J_ROOT)\main\shared\data" mkdir "$(ICU4J_ROOT)\main\shared\data"
copy "$(ICUOUT)\icu4j\icutzdata.jar" "$(ICU4J_ROOT)\main\shared\data"
"$(ICU4J_ROOT)\main\shared\data\testdata.jar": "$(ICUOUT)\icu4j\testdata.jar"
if not exist "$(ICU4J_ROOT)\main\shared\data" mkdir "$(ICU4J_ROOT)\main\shared\data"
copy "$(ICUOUT)\icu4j\testdata.jar" "$(ICU4J_ROOT)\main\shared\data"
# "$(DEBUGUTILTIESDATA_OUT)"
"$(ICU4J_ROOT)\$(DEBUGUTILITIESDATA_DIR)\$(DEBUGUTILITIESDATA_SRC)": "$(ICUOUT)\icu4j\src\$(DEBUGUTILITIESDATA_DIR)\$(DEBUGUTILITIESDATA_SRC)"
if not exist "$(ICU4J_ROOT)\$(DEBUGUTILITIESDATA_DIR)" mkdir "$(ICU4J_ROOT)\$(DEBUGUTILITIESDATA_DIR)"
copy "$(ICUOUT)\icu4j\src\$(DEBUGUTILITIESDATA_DIR)\$(DEBUGUTILITIESDATA_SRC)" "$(ICU4J_ROOT)\$(DEBUGUTILITIESDATA_DIR)\$(DEBUGUTILITIESDATA_SRC)"
ICU4J_DATA_INSTALLED="$(ICU4J_ROOT)\main\shared\data\icudata.jar" "$(ICU4J_ROOT)\main\shared\data\icutzdata.jar" "$(ICU4J_ROOT)\main\shared\data\testdata.jar" "$(ICU4J_ROOT)\$(DEBUGUTILITIESDATA_DIR)\$(DEBUGUTILITIESDATA_SRC)"
icu4j-data-install : GODATA $(ICU4J_DATA) $(ICU4J_TZDATA) $(ICU4J_DATA_INSTALLED)
@echo ICU4J data output to "$(ICU4J_ROOT)"
!ELSE
icu4j-data-install :
@echo ERROR ICU4J_ROOT not set
@exit 1
!ENDIF
#
# testdata - nmake will invoke pkgdata, which will create testdata.dat
#
"$(TESTDATAOUT)\testdata.dat": "$(TESTDATA)\*" $(TOOLS_TS)
@cd "$(TESTDATA)"
@echo building testdata...
nmake /nologo /f "$(TESTDATA)\testdata.mak" TESTDATA=. ICUTOOLS="$(ICUTOOLS)" ICUPBIN="$(ICUPBIN)" ICUP="$(ICUP)" CFG=$(CFGTOOLS) TESTDATAOUT="$(TESTDATAOUT)" TESTDATABLD="$(TESTDATABLD)" ICUSRCDATA="$(ICUSRCDATA)" DLL_OUTPUT="$(DLL_OUTPUT)"
#invoke pkgdata for ICU common data
# pkgdata will drop all output files (.dat, .dll, .lib) into the target (ICUBLD_PKG) directory.
# move the .dll and .lib files to their final destination afterwards.
# The $(U_ICUDATA_NAME).lib and $(U_ICUDATA_NAME).exp should already be in the right place due to stubdata.
#
# 2005-may-05 Removed Unicode properties files (unorm.icu, uprops.icu, ucase.icu, ubidi.icu)
# from data build. See Jitterbug 4497. (makedata.mak revision 1.117)
#
!IFDEF ICUDATA_SOURCE_ARCHIVE
"$(ICU_LIB_TARGET)" : $(COMMON_ICUDATA_DEPENDENCIES) "$(ICUDATA_SOURCE_ARCHIVE)"
@echo Building icu data from $(ICUDATA_SOURCE_ARCHIVE)
cd "$(ICUBLD_PKG)"
"$(ICUPBIN)\icupkg" -x * --list "$(ICUDATA_SOURCE_ARCHIVE)" > "$(ICUTMP)\icudata.lst"
"$(ICUPBIN)\pkgdata" $(COMMON_ICUDATA_ARGUMENTS) "$(ICUTMP)\icudata.lst"
copy "$(U_ICUDATA_NAME).dll" "$(DLL_OUTPUT)"
-@erase "$(U_ICUDATA_NAME).dll"
copy "$(ICUTMP)\$(ICUPKG).dat" "$(ICUOUT)\$(U_ICUDATA_NAME)$(U_ICUDATA_ENDIAN_SUFFIX).dat"
-@erase "$(ICUTMP)\$(ICUPKG).dat"
!ELSE
"$(ICU_LIB_TARGET)" : $(COMMON_ICUDATA_DEPENDENCIES) $(COREDATA_TS)
@echo Building ICU data from scratch
cd "$(ICUBLD_PKG)"
"$(ICUPBIN)\pkgdata" $(COMMON_ICUDATA_ARGUMENTS) $(ICUTMP)\icudata.lst
-@erase "$(ICU_LIB_TARGET)"
@if not exist "$(DLL_OUTPUT)" mkdir "$(DLL_OUTPUT)"
copy "$(U_ICUDATA_NAME).dll" "$(ICU_LIB_TARGET)"
-@erase "$(U_ICUDATA_NAME).dll"
copy "$(ICUTMP)\$(ICUPKG).dat" "$(ICUOUT)\$(U_ICUDATA_NAME)$(U_ICUDATA_ENDIAN_SUFFIX).dat"
-@erase "$(ICUTMP)\$(ICUPKG).dat"
!ENDIF
"$(ARM_CROSSBUILD_TS)" : $(COMMON_ICUDATA_DEPENDENCIES) "$(ICU_LIB_TARGET)"
@echo Building ICU data for "$(ARM_CROSS_BUILD)" from x64
cd "$(ICUBLD_PKG)"
"$(ICUPBIN)\pkgdata" $(COMMON_ICUDATA_ARGUMENTS) $(ICUTMP)\icudata.lst
-@erase "$(ICU_LIB_TARGET)"
@if not exist "$(DLL_OUTPUT)" mkdir "$(DLL_OUTPUT)"
copy "$(U_ICUDATA_NAME).dll" "$(ICU_LIB_TARGET)"
-@erase "$(U_ICUDATA_NAME).dll"
copy "$(ICUTMP)\$(ICUPKG).dat" "$(ICUOUT)\$(U_ICUDATA_NAME)$(U_ICUDATA_ENDIAN_SUFFIX).dat"
-@erase "$(ICUTMP)\$(ICUPKG).dat"
@echo "timestamp" > $(ARM_CROSSBUILD_TS)
# utility target to create missing directories
# Most directories are made by Python, but still create ICUTMP
# so it works in the source archive
CREATE_DIRS :
@if not exist "$(ICUOUT)\$(NULL)" mkdir "$(ICUOUT)"
@if not exist "$(ICUTMP)\$(NULL)" mkdir "$(ICUTMP)"
@if not exist "$(ICUOUT)\build\$(NULL)" mkdir "$(ICUOUT)\build"
@if not exist "$(ICUBLD_PKG)\$(NULL)" mkdir "$(ICUBLD_PKG)"
@if not exist "$(TESTDATAOUT)" mkdir "$(TESTDATAOUT)"
# utility target to send us to the right dir
GODATA : CREATE_DIRS
@cd "$(ICUBLD_PKG)"
# This is to remove all the data files
CLEAN : GODATA
@echo Cleaning up the data files.
@cd "$(ICUOUT)"
-@erase "$(ICUOUT)\*.dat"
@rmdir $(ICUBLD) /s /q
@rmdir $(ICUTMP) /s /q
@rmdir $(TESTDATAOUT) /s /q
# DLL version information
# If you modify this, modify winmode.c in pkgdata.
"$(ICUTMP)\icudata.res": "$(ICUSRCDATA)\misc\icudata.rc"
@echo Creating data DLL version information from $**
@rc.exe /i "..\..\..\..\common" /r /fo $@ $**
# Targets for prebuilt Unicode data
# Needed for ICU4J!
"$(ICUBLD_PKG)\pnames.icu": $(ICUSRCDATA_RELATIVE_PATH)\in\pnames.icu
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\ubidi.icu": $(ICUSRCDATA_RELATIVE_PATH)\in\ubidi.icu
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\ucase.icu": $(ICUSRCDATA_RELATIVE_PATH)\in\ucase.icu
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\uprops.icu": $(ICUSRCDATA_RELATIVE_PATH)\in\uprops.icu
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\unames.icu": $(ICUSRCDATA_RELATIVE_PATH)\in\unames.icu
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\nfc.nrm": $(ICUSRCDATA_RELATIVE_PATH)\in\nfc.nrm
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\nfkc.nrm": $(ICUSRCDATA_RELATIVE_PATH)\in\nfkc.nrm
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\nfkc_cf.nrm": $(ICUSRCDATA_RELATIVE_PATH)\in\nfkc_cf.nrm
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\uts46.nrm": $(ICUSRCDATA_RELATIVE_PATH)\in\uts46.nrm
"$(ICUPBIN)\icupkg" -tl $? $@
"$(ICUBLD_PKG)\coll\ucadata.icu": $(ICUSRCDATA_RELATIVE_PATH)\in\coll\ucadata-unihan.icu
"$(ICUPBIN)\icupkg" -tl $? $@
!IFDEF ICUDATA_ARCHIVE
"$(ICUDATA_SOURCE_ARCHIVE)": CREATE_DIRS $(ICUDATA_ARCHIVE) $(TOOLS_TS)
"$(ICUTOOLS)\icupkg\$(CFGTOOLS)\icupkg" -t$(U_ICUDATA_ENDIAN_SUFFIX) "$(ICUDATA_ARCHIVE)" "$(ICUDATA_SOURCE_ARCHIVE)"
!ENDIF