| // Copyright 2014 Google Inc. All Rights Reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include "cobalt/renderer/pipeline.h" |
| |
| #include "base/bind.h" |
| #include "base/debug/trace_event.h" |
| #include "base/file_path.h" |
| #include "base/file_util.h" |
| #include "base/path_service.h" |
| #include "cobalt/base/address_sanitizer.h" |
| #include "cobalt/base/cobalt_paths.h" |
| #include "cobalt/base/polymorphic_downcast.h" |
| #include "cobalt/math/rect_f.h" |
| #include "cobalt/render_tree/brush.h" |
| #include "cobalt/render_tree/dump_render_tree_to_string.h" |
| #include "cobalt/render_tree/rect_node.h" |
| #include "nb/memory_scope.h" |
| |
| using cobalt::render_tree::Node; |
| using cobalt::render_tree::animations::AnimateNode; |
| |
| namespace cobalt { |
| namespace renderer { |
| |
| namespace { |
| // How quickly the renderer time adjusts to changing submission times. |
| // 500ms is chosen as a default because it is fast enough that the user will not |
| // usually notice input lag from a slow timeline renderer, but slow enough that |
| // quick updates while a quick animation is playing should not jank. |
| const double kTimeToConvergeInMS = 500.0; |
| |
| // The stack size to be used for the renderer thread. This is must be large |
| // enough to support recursing on the render tree. |
| const int kRendererThreadStackSize = |
| 128 * 1024 + base::kAsanAdditionalStackSize; |
| |
| // How many entries the rasterize periodic timer will contain before updating. |
| const size_t kRasterizePeriodicTimerEntriesPerUpdate = 60; |
| |
| // The maxiumum numer of entries that the rasterize animations timer can contain |
| // before automatically updating. In the typical use case, the update will |
| // occur manually when the animations expire. |
| const size_t kRasterizeAnimationsTimerMaxEntries = 60; |
| |
| void DestructSubmissionOnMessageLoop(MessageLoop* message_loop, |
| scoped_ptr<Submission> submission) { |
| TRACE_EVENT0("cobalt::renderer", "DestructSubmissionOnMessageLoop()"); |
| if (MessageLoop::current() != message_loop) { |
| message_loop->DeleteSoon(FROM_HERE, submission.release()); |
| } |
| } |
| |
| } // namespace |
| |
| Pipeline::Pipeline(const CreateRasterizerFunction& create_rasterizer_function, |
| const scoped_refptr<backend::RenderTarget>& render_target, |
| backend::GraphicsContext* graphics_context, |
| bool submit_even_if_render_tree_is_unchanged, |
| ShutdownClearMode clear_on_shutdown_mode, |
| const Options& options) |
| : rasterizer_created_event_(true, false), |
| render_target_(render_target), |
| graphics_context_(graphics_context), |
| rasterizer_thread_("Rasterizer"), |
| submission_disposal_thread_("Rasterizer Submission Disposal"), |
| submit_even_if_render_tree_is_unchanged_( |
| submit_even_if_render_tree_is_unchanged), |
| last_did_rasterize_(false), |
| last_animations_expired_(true), |
| last_stat_tracked_animations_expired_(true), |
| rasterize_periodic_timer_("Renderer.Rasterize.Duration", |
| kRasterizePeriodicTimerEntriesPerUpdate, |
| false /*enable_entry_list_c_val*/), |
| rasterize_animations_timer_("Renderer.Rasterize.Animations", |
| kRasterizeAnimationsTimerMaxEntries, |
| true /*enable_entry_list_c_val*/), |
| ALLOW_THIS_IN_INITIALIZER_LIST(rasterize_periodic_interval_timer_( |
| "Renderer.Rasterize.DurationInterval", |
| kRasterizeAnimationsTimerMaxEntries, true /*enable_entry_list_c_val*/, |
| base::Bind(&Pipeline::FrameStatsOnFlushCallback, |
| base::Unretained(this)))), |
| rasterize_animations_interval_timer_( |
| "Renderer.Rasterize.AnimationsInterval", |
| kRasterizeAnimationsTimerMaxEntries, |
| true /*enable_entry_list_c_val*/), |
| new_render_tree_rasterize_count_( |
| "Count.Renderer.Rasterize.NewRenderTree", 0, |
| "Total number of new render trees rasterized."), |
| new_render_tree_rasterize_time_( |
| "Time.Renderer.Rasterize.NewRenderTree", 0, |
| "The last time a new render tree was rasterized."), |
| has_active_animations_c_val_( |
| "Renderer.HasActiveAnimations", false, |
| "Is non-zero if the current render tree has active animations."), |
| animations_start_time_( |
| "Time.Renderer.Rasterize.Animations.Start", 0, |
| "The most recent time animations started playing."), |
| animations_end_time_("Time.Renderer.Rasterize.Animations.End", 0, |
| "The most recent time animations ended playing."), |
| #if defined(ENABLE_DEBUG_CONSOLE) |
| ALLOW_THIS_IN_INITIALIZER_LIST(dump_current_render_tree_command_handler_( |
| "dump_render_tree", |
| base::Bind(&Pipeline::OnDumpCurrentRenderTree, |
| base::Unretained(this)), |
| "Dumps the current render tree to text.", |
| "Dumps the current render tree either to the console if no parameter " |
| "is specified, or to a file with the specified filename relative to " |
| "the debug output folder.")), |
| ALLOW_THIS_IN_INITIALIZER_LIST(toggle_fps_stdout_command_handler_( |
| "toggle_fps_stdout", |
| base::Bind(&Pipeline::OnToggleFpsStdout, base::Unretained(this)), |
| "Toggles printing framerate stats to stdout.", |
| "When enabled, at the end of each animation (or every time a maximum " |
| "number of frames are rendered), framerate statistics are printed " |
| "to stdout.")), |
| ALLOW_THIS_IN_INITIALIZER_LIST(toggle_fps_overlay_command_handler_( |
| "toggle_fps_overlay", |
| base::Bind(&Pipeline::OnToggleFpsOverlay, base::Unretained(this)), |
| "Toggles rendering framerate stats to an overlay on the display.", |
| "Framerate statistics are rendered to a display overlay. The " |
| "numbers are updated at the end of each animation (or every time a " |
| "maximum number of frames are rendered), framerate statistics are " |
| "printed to stdout.")), |
| #endif |
| clear_on_shutdown_mode_(clear_on_shutdown_mode), |
| enable_fps_stdout_(options.enable_fps_stdout), |
| enable_fps_overlay_(options.enable_fps_overlay), |
| fps_overlay_update_pending_(false) { |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::Pipeline()"); |
| // The actual Pipeline can be constructed from any thread, but we want |
| // rasterizer_thread_checker_ to be associated with the rasterizer thread, |
| // so we detach it here and let it reattach itself to the rasterizer thread |
| // when CalledOnValidThread() is called on rasterizer_thread_checker_ below. |
| rasterizer_thread_checker_.DetachFromThread(); |
| |
| rasterizer_thread_.StartWithOptions( |
| base::Thread::Options(MessageLoop::TYPE_DEFAULT, kRendererThreadStackSize, |
| base::kThreadPriority_Highest)); |
| |
| rasterizer_thread_.message_loop()->PostTask( |
| FROM_HERE, |
| base::Bind(&Pipeline::InitializeRasterizerThread, base::Unretained(this), |
| create_rasterizer_function)); |
| } |
| |
| Pipeline::~Pipeline() { |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::~Pipeline()"); |
| |
| // First we shutdown the submission queue. We do this as a separate step from |
| // rasterizer shutdown because it may post messages back to the rasterizer |
| // thread as it clears itself out (e.g. it may ask the rasterizer thread to |
| // delete textures). We wait for this shutdown to complete before proceeding |
| // to shutdown the rasterizer thread. |
| rasterizer_thread_.message_loop()->PostBlockingTask( |
| FROM_HERE, |
| base::Bind(&Pipeline::ShutdownSubmissionQueue, base::Unretained(this))); |
| |
| // This potential reference to a render tree whose animations may have ended |
| // must be destroyed before we shutdown the rasterizer thread since it may |
| // contain references to render tree nodes and resources. |
| last_render_tree_ = NULL; |
| last_animated_render_tree_ = NULL; |
| |
| // Submit a shutdown task to the rasterizer thread so that it can shutdown |
| // anything that must be shutdown from that thread. |
| rasterizer_thread_.message_loop()->PostTask( |
| FROM_HERE, |
| base::Bind(&Pipeline::ShutdownRasterizerThread, base::Unretained(this))); |
| |
| rasterizer_thread_.Stop(); |
| } |
| |
| render_tree::ResourceProvider* Pipeline::GetResourceProvider() { |
| rasterizer_created_event_.Wait(); |
| return rasterizer_->GetResourceProvider(); |
| } |
| |
| void Pipeline::Submit(const Submission& render_tree_submission) { |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::Submit()"); |
| |
| // Execute the actual set of the new render tree on the rasterizer tree. |
| rasterizer_thread_.message_loop()->PostTask( |
| FROM_HERE, base::Bind(&Pipeline::SetNewRenderTree, base::Unretained(this), |
| CollectAnimations(render_tree_submission))); |
| } |
| |
| void Pipeline::Clear() { |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::Clear()"); |
| rasterizer_thread_.message_loop()->PostBlockingTask( |
| FROM_HERE, |
| base::Bind(&Pipeline::ClearCurrentRenderTree, base::Unretained(this))); |
| } |
| |
| void Pipeline::RasterizeToRGBAPixels( |
| const Submission& render_tree_submission, |
| const RasterizationCompleteCallback& complete) { |
| TRACK_MEMORY_SCOPE("Renderer"); |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::RasterizeToRGBAPixels()"); |
| |
| if (MessageLoop::current() != rasterizer_thread_.message_loop()) { |
| rasterizer_thread_.message_loop()->PostTask( |
| FROM_HERE, |
| base::Bind(&Pipeline::RasterizeToRGBAPixels, base::Unretained(this), |
| CollectAnimations(render_tree_submission), complete)); |
| return; |
| } |
| // Create a new target that is the same dimensions as the display target. |
| scoped_refptr<backend::RenderTarget> offscreen_target = |
| graphics_context_->CreateDownloadableOffscreenRenderTarget( |
| render_target_->GetSize()); |
| |
| // Rasterize this submission into the newly created target. |
| RasterizeSubmissionToRenderTarget(render_tree_submission, offscreen_target); |
| |
| // Load the texture's pixel data into a CPU memory buffer and return it. |
| complete.Run(graphics_context_->DownloadPixelDataAsRGBA(offscreen_target), |
| render_target_->GetSize()); |
| } |
| |
| void Pipeline::TimeFence(base::TimeDelta time_fence) { |
| TRACK_MEMORY_SCOPE("Renderer"); |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::TimeFence()"); |
| |
| if (MessageLoop::current() != rasterizer_thread_.message_loop()) { |
| rasterizer_thread_.message_loop()->PostTask( |
| FROM_HERE, |
| base::Bind(&Pipeline::TimeFence, base::Unretained(this), time_fence)); |
| return; |
| } |
| |
| if (!time_fence_) { |
| time_fence_ = time_fence; |
| } else { |
| LOG(ERROR) << "Attempting to set a time fence while one was already set."; |
| } |
| } |
| |
| void Pipeline::SetNewRenderTree(const Submission& render_tree_submission) { |
| DCHECK(rasterizer_thread_checker_.CalledOnValidThread()); |
| DCHECK(render_tree_submission.render_tree.get()); |
| |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::SetNewRenderTree()"); |
| |
| // If a time fence is active, save the submission to be queued only after |
| // we pass the time fence. Overwrite any existing waiting submission in this |
| // case. |
| if (time_fence_) { |
| post_fence_submission_ = render_tree_submission; |
| post_fence_receipt_time_ = base::TimeTicks::Now(); |
| return; |
| } |
| |
| QueueSubmission(render_tree_submission, base::TimeTicks::Now()); |
| |
| // Start the rasterization timer if it is not yet started. |
| if (!rasterize_timer_) { |
| // We artificially limit the period between submissions to 7ms, in case a |
| // platform does not rate limit itself during swaps. This was changed from |
| // 15ms to accommodate 120fps requirements on some platforms. |
| rasterize_timer_.emplace( |
| FROM_HERE, base::TimeDelta::FromMillisecondsD( |
| COBALT_MINIMUM_FRAME_TIME_IN_MILLISECONDS), |
| base::Bind(&Pipeline::RasterizeCurrentTree, base::Unretained(this)), |
| true, true); |
| rasterize_timer_->Reset(); |
| } |
| } |
| |
| void Pipeline::ClearCurrentRenderTree() { |
| DCHECK(rasterizer_thread_checker_.CalledOnValidThread()); |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::ClearCurrentRenderTree()"); |
| |
| ResetSubmissionQueue(); |
| rasterize_timer_ = base::nullopt; |
| } |
| |
| void Pipeline::RasterizeCurrentTree() { |
| TRACK_MEMORY_SCOPE("Renderer"); |
| DCHECK(rasterizer_thread_checker_.CalledOnValidThread()); |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::RasterizeCurrentTree()"); |
| |
| base::TimeTicks start_rasterize_time = base::TimeTicks::Now(); |
| Submission submission = |
| submission_queue_->GetCurrentSubmission(start_rasterize_time); |
| |
| bool is_new_render_tree = submission.render_tree != last_render_tree_; |
| bool has_render_tree_changed = |
| !last_animations_expired_ || is_new_render_tree; |
| |
| // If our render tree hasn't changed from the one that was previously |
| // rendered and it's okay on this system to not flip the display buffer |
| // frequently, then we can just not do anything here. |
| if (fps_overlay_update_pending_ || submit_even_if_render_tree_is_unchanged_ || |
| has_render_tree_changed) { |
| // Check whether the animations in the render tree that is being rasterized |
| // are active. |
| render_tree::animations::AnimateNode* animate_node = |
| base::polymorphic_downcast<render_tree::animations::AnimateNode*>( |
| submission.render_tree.get()); |
| |
| // Rasterize the last submitted render tree. |
| bool did_rasterize = |
| RasterizeSubmissionToRenderTarget(submission, render_target_); |
| |
| bool animations_expired = animate_node->expiry() <= submission.time_offset; |
| bool stat_tracked_animations_expired = |
| animate_node->depends_on_time_expiry() <= submission.time_offset; |
| |
| UpdateRasterizeStats(did_rasterize, stat_tracked_animations_expired, |
| is_new_render_tree, start_rasterize_time, |
| base::TimeTicks::Now()); |
| |
| last_did_rasterize_ = did_rasterize; |
| last_animations_expired_ = animations_expired; |
| last_stat_tracked_animations_expired_ = stat_tracked_animations_expired; |
| } |
| |
| if (time_fence_ && submission_queue_->submission_time( |
| base::TimeTicks::Now()) >= *time_fence_) { |
| // A time fence was active and we just crossed it, so reset it. |
| time_fence_ = base::nullopt; |
| |
| if (post_fence_submission_) { |
| // A submission was waiting to be queued once we passed the time fence, |
| // so go ahead and queue it now. |
| QueueSubmission(*post_fence_submission_, *post_fence_receipt_time_); |
| post_fence_submission_ = base::nullopt; |
| post_fence_receipt_time_ = base::nullopt; |
| } |
| } |
| } |
| |
| void Pipeline::UpdateRasterizeStats(bool did_rasterize, |
| bool are_stat_tracked_animations_expired, |
| bool is_new_render_tree, |
| base::TimeTicks start_time, |
| base::TimeTicks end_time) { |
| bool last_animations_active = |
| !last_stat_tracked_animations_expired_ && last_did_rasterize_; |
| bool animations_active = |
| !are_stat_tracked_animations_expired && did_rasterize; |
| |
| // The rasterization is only timed with the periodic timer when the render |
| // tree has changed. This ensures that the frames being timed are consistent |
| // between platforms that submit unchanged trees and those that don't. |
| if (did_rasterize) { |
| rasterize_periodic_timer_.Start(start_time); |
| rasterize_periodic_timer_.Stop(end_time); |
| } |
| |
| if (last_animations_active || animations_active) { |
| // The rasterization is only timed with the animations timer when there are |
| // animations to track. This applies when animations were active during |
| // either the last rasterization or the current one. The reason for |
| // including the last one is that if animations have just expired, then this |
| // rasterization produces the final state of the animated tree. |
| if (did_rasterize) { |
| rasterize_animations_timer_.Start(start_time); |
| rasterize_animations_timer_.Stop(end_time); |
| } |
| |
| // If animations are going from being inactive to active, then set the c_val |
| // prior to starting the animation so that it's in the correct state while |
| // the tree is being rendered. |
| // Also, start the interval timer now. While the first entry only captures a |
| // partial interval, it's recorded to include the duration of the first |
| // submission. All subsequent entries will record a full interval. |
| if (!last_animations_active && animations_active) { |
| has_active_animations_c_val_ = true; |
| rasterize_periodic_interval_timer_.Start(start_time); |
| rasterize_animations_interval_timer_.Start(start_time); |
| } |
| |
| if (!did_rasterize) { |
| // If we didn't actually rasterize anything, don't count this sample. |
| rasterize_periodic_interval_timer_.Cancel(); |
| rasterize_animations_interval_timer_.Cancel(); |
| } else { |
| rasterize_periodic_interval_timer_.Stop(end_time); |
| rasterize_animations_interval_timer_.Stop(end_time); |
| } |
| |
| // If animations are active, then they are guaranteed at least one more |
| // interval. Start the timer to record its duration. |
| if (animations_active) { |
| rasterize_periodic_interval_timer_.Start(end_time); |
| rasterize_animations_interval_timer_.Start(end_time); |
| } |
| |
| // Check for if the animations are starting or ending. |
| if (!last_animations_active && animations_active) { |
| animations_start_time_ = end_time.ToInternalValue(); |
| } else if (last_animations_active && !animations_active) { |
| animations_end_time_ = end_time.ToInternalValue(); |
| has_active_animations_c_val_ = false; |
| rasterize_animations_interval_timer_.Flush(); |
| rasterize_animations_timer_.Flush(); |
| } |
| } |
| |
| if (is_new_render_tree) { |
| ++new_render_tree_rasterize_count_; |
| new_render_tree_rasterize_time_ = end_time.ToInternalValue(); |
| } |
| } |
| |
| bool Pipeline::RasterizeSubmissionToRenderTarget( |
| const Submission& submission, |
| const scoped_refptr<backend::RenderTarget>& render_target) { |
| TRACE_EVENT0("cobalt::renderer", |
| "Pipeline::RasterizeSubmissionToRenderTarget()"); |
| |
| // Keep track of the last render tree that we rendered so that we can watch |
| // if it changes, in which case we should reset our tracked |
| // |previous_animated_area_|. |
| if (submission.render_tree != last_render_tree_) { |
| last_render_tree_ = submission.render_tree; |
| last_animated_render_tree_ = NULL; |
| previous_animated_area_ = base::nullopt; |
| last_render_time_ = base::nullopt; |
| } |
| |
| // Animate the render tree using the submitted animations. |
| render_tree::animations::AnimateNode* animate_node = |
| last_animated_render_tree_ |
| ? last_animated_render_tree_.get() |
| : base::polymorphic_downcast<render_tree::animations::AnimateNode*>( |
| submission.render_tree.get()); |
| |
| // Some animations require a GL graphics context to be current. Specifically, |
| // a call to SbPlayerGetCurrentFrame() may be made to get the current video |
| // frame to drive a video-as-an-animated-image. |
| rasterizer_->MakeCurrent(); |
| |
| render_tree::animations::AnimateNode::AnimateResults results = |
| animate_node->Apply(submission.time_offset); |
| |
| if (results.animated == last_animated_render_tree_ && |
| !submit_even_if_render_tree_is_unchanged_ && |
| !fps_overlay_update_pending_) { |
| return false; |
| } |
| last_animated_render_tree_ = results.animated; |
| |
| // Calculate a bounding box around the active animations. Union it with the |
| // bounding box around active animations from the previous frame, and we get |
| // a scissor rectangle marking the dirty regions of the screen. |
| math::RectF animated_bounds = results.get_animation_bounds_since.Run( |
| last_render_time_ ? *last_render_time_ : base::TimeDelta()); |
| math::Rect rounded_bounds = math::RoundOut(animated_bounds); |
| base::optional<math::Rect> redraw_area; |
| if (previous_animated_area_) { |
| redraw_area = math::UnionRects(rounded_bounds, *previous_animated_area_); |
| } |
| previous_animated_area_ = rounded_bounds; |
| |
| scoped_refptr<render_tree::Node> submit_tree = results.animated->source(); |
| if (enable_fps_overlay_ && fps_overlay_) { |
| submit_tree = |
| fps_overlay_->AnnotateRenderTreeWithOverlay(results.animated->source()); |
| fps_overlay_update_pending_ = false; |
| } |
| |
| // Rasterize the animated render tree. |
| rasterizer::Rasterizer::Options rasterizer_options; |
| rasterizer_options.dirty = redraw_area; |
| rasterizer_->Submit(submit_tree, render_target, rasterizer_options); |
| |
| if (!submission.on_rasterized_callback.is_null()) { |
| submission.on_rasterized_callback.Run(); |
| } |
| |
| last_render_time_ = submission.time_offset; |
| |
| return true; |
| } |
| |
| void Pipeline::InitializeRasterizerThread( |
| const CreateRasterizerFunction& create_rasterizer_function) { |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::InitializeRasterizerThread"); |
| DCHECK(rasterizer_thread_checker_.CalledOnValidThread()); |
| rasterizer_ = create_rasterizer_function.Run(); |
| rasterizer_created_event_.Signal(); |
| |
| // Note that this is setup as high priority, but lower than the rasterizer |
| // thread's priority (kThreadPriority_Highest). This is to ensure that |
| // we never interrupt the rasterizer in order to dispose render trees, but |
| // at the same time we do want to prioritize cleaning them up to avoid |
| // large queues of pending render tree disposals. |
| submission_disposal_thread_.StartWithOptions( |
| base::Thread::Options(MessageLoop::TYPE_DEFAULT, kRendererThreadStackSize, |
| base::kThreadPriority_High)); |
| |
| ResetSubmissionQueue(); |
| } |
| |
| void Pipeline::ShutdownSubmissionQueue() { |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::ShutdownSubmissionQueue()"); |
| DCHECK(rasterizer_thread_checker_.CalledOnValidThread()); |
| // Stop and shutdown the raterizer timer. If we won't have a submission |
| // queue anymore, we won't be able to rasterize anymore. |
| rasterize_timer_ = base::nullopt; |
| |
| // Do not retain any more references to the current render tree (which |
| // may refer to rasterizer resources) or animations which may refer to |
| // render trees. |
| submission_queue_ = base::nullopt; |
| |
| // Shut down our submission disposer thread. This needs to happen now to |
| // ensure that any pending "dispose" messages are processed. Each disposal |
| // may result in new messages being posted to this rasterizer thread's message |
| // loop, and so we want to make sure these are all queued up before |
| // proceeding. |
| submission_disposal_thread_.Stop(); |
| } |
| |
| void Pipeline::ShutdownRasterizerThread() { |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::ShutdownRasterizerThread()"); |
| DCHECK(rasterizer_thread_checker_.CalledOnValidThread()); |
| |
| // Submit a black fullscreen rect node to clear the display before shutting |
| // down. This can be helpful if we quit while playing a video via |
| // punch-through, which may result in unexpected images/colors appearing for |
| // a flicker behind the display. |
| if (render_target_ && (clear_on_shutdown_mode_ == kClearToBlack)) { |
| rasterizer_->Submit( |
| new render_tree::RectNode( |
| math::RectF(render_target_->GetSize()), |
| scoped_ptr<render_tree::Brush>(new render_tree::SolidColorBrush( |
| render_tree::ColorRGBA(0.0f, 0.0f, 0.0f, 1.0f)))), |
| render_target_); |
| } |
| |
| // Finally, destroy the rasterizer. |
| rasterizer_.reset(); |
| } |
| |
| #if defined(ENABLE_DEBUG_CONSOLE) |
| void Pipeline::OnDumpCurrentRenderTree(const std::string& message) { |
| if (MessageLoop::current() != rasterizer_thread_.message_loop()) { |
| rasterizer_thread_.message_loop()->PostTask( |
| FROM_HERE, base::Bind(&Pipeline::OnDumpCurrentRenderTree, |
| base::Unretained(this), message)); |
| return; |
| } |
| |
| if (!rasterize_timer_) { |
| LOG(INFO) << "No render tree available yet."; |
| return; |
| } |
| |
| // Grab the most recent submission, animate it, and then dump the results to |
| // text. |
| Submission submission = |
| submission_queue_->GetCurrentSubmission(base::TimeTicks::Now()); |
| |
| render_tree::animations::AnimateNode* animate_node = |
| base::polymorphic_downcast<render_tree::animations::AnimateNode*>( |
| submission.render_tree.get()); |
| render_tree::animations::AnimateNode::AnimateResults results = |
| animate_node->Apply(submission.time_offset); |
| |
| std::string tree_dump = |
| render_tree::DumpRenderTreeToString(results.animated->source()); |
| if (message.empty() || message == "undefined") { |
| // If no filename was specified, send output to the console. |
| LOG(INFO) << tree_dump.c_str(); |
| } else { |
| // If a filename was specified, dump the output to that file. |
| FilePath out_dir; |
| PathService::Get(paths::DIR_COBALT_DEBUG_OUT, &out_dir); |
| |
| file_util::WriteFile(out_dir.Append(message), tree_dump.c_str(), |
| tree_dump.length()); |
| } |
| } |
| |
| void Pipeline::OnToggleFpsStdout(const std::string& message) { |
| if (MessageLoop::current() != rasterizer_thread_.message_loop()) { |
| rasterizer_thread_.message_loop()->PostTask( |
| FROM_HERE, base::Bind(&Pipeline::OnToggleFpsStdout, |
| base::Unretained(this), message)); |
| return; |
| } |
| |
| enable_fps_stdout_ = !enable_fps_stdout_; |
| } |
| |
| void Pipeline::OnToggleFpsOverlay(const std::string& message) { |
| if (MessageLoop::current() != rasterizer_thread_.message_loop()) { |
| rasterizer_thread_.message_loop()->PostTask( |
| FROM_HERE, base::Bind(&Pipeline::OnToggleFpsOverlay, |
| base::Unretained(this), message)); |
| return; |
| } |
| |
| enable_fps_overlay_ = !enable_fps_overlay_; |
| fps_overlay_update_pending_ = enable_fps_overlay_; |
| } |
| #endif // #if defined(ENABLE_DEBUG_CONSOLE) |
| |
| Submission Pipeline::CollectAnimations( |
| const Submission& render_tree_submission) { |
| // Constructing an AnimateNode will result in the tree being traversed to |
| // collect all sub-AnimateNodes into the new one, in order to maintain the |
| // invariant that a sub-tree of an AnimateNode has no AnimateNodes. |
| Submission collected_submission = render_tree_submission; |
| collected_submission.render_tree = new render_tree::animations::AnimateNode( |
| render_tree_submission.render_tree); |
| return collected_submission; |
| } |
| |
| namespace { |
| void PrintFPS(const base::CValCollectionTimerStatsFlushResults& results) { |
| SbLogRaw(base::StringPrintf("FPS => # samples: %d, avg: %.1fms, " |
| "[min, max]: [%.1fms, %.1fms]\n" |
| " 25th : 50th : 75th : 95th pct - " |
| "%.1fms : %.1fms : %.1fms : %.1fms\n", |
| static_cast<unsigned int>(results.sample_count), |
| results.average.InMillisecondsF(), |
| results.minimum.InMillisecondsF(), |
| results.maximum.InMillisecondsF(), |
| results.percentile_25th.InMillisecondsF(), |
| results.percentile_50th.InMillisecondsF(), |
| results.percentile_75th.InMillisecondsF(), |
| results.percentile_95th.InMillisecondsF()) |
| .c_str()); |
| } |
| } // namespace |
| |
| void Pipeline::FrameStatsOnFlushCallback( |
| const base::CValCollectionTimerStatsFlushResults& flush_results) { |
| DCHECK(rasterizer_thread_checker_.CalledOnValidThread()); |
| |
| if (enable_fps_overlay_) { |
| if (!fps_overlay_) { |
| fps_overlay_.emplace(rasterizer_->GetResourceProvider()); |
| } |
| |
| fps_overlay_->UpdateOverlay(flush_results); |
| fps_overlay_update_pending_ = true; |
| } |
| |
| if (enable_fps_stdout_) { |
| PrintFPS(flush_results); |
| } |
| } |
| |
| void Pipeline::ResetSubmissionQueue() { |
| TRACK_MEMORY_SCOPE("Renderer"); |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::ResetSubmissionQueue()"); |
| submission_queue_ = base::nullopt; |
| submission_queue_.emplace( |
| current_timeline_info_.max_submission_queue_size, |
| base::TimeDelta::FromMillisecondsD(kTimeToConvergeInMS), |
| current_timeline_info_.allow_latency_reduction, |
| base::Bind(&DestructSubmissionOnMessageLoop, |
| submission_disposal_thread_.message_loop())); |
| } |
| |
| void Pipeline::QueueSubmission(const Submission& submission, |
| base::TimeTicks receipt_time) { |
| TRACK_MEMORY_SCOPE("Renderer"); |
| TRACE_EVENT0("cobalt::renderer", "Pipeline::QueueSubmission()"); |
| // Upon each submission, check if the timeline has changed. If it has, |
| // reset our submission queue (possibly with a new configuration specified |
| // within |timeline_info|. |
| if (submission.timeline_info.id != current_timeline_info_.id) { |
| current_timeline_info_ = submission.timeline_info; |
| ResetSubmissionQueue(); |
| } |
| |
| submission_queue_->PushSubmission(submission, receipt_time); |
| } |
| |
| } // namespace renderer |
| } // namespace cobalt |