| # Copyright (c) 2012 Google Inc. All rights reserved. | |
| # | |
| # Redistribution and use in source and binary forms, with or without | |
| # modification, are permitted provided that the following conditions are | |
| # met: | |
| # | |
| # * Redistributions of source code must retain the above copyright | |
| # notice, this list of conditions and the following disclaimer. | |
| # * Redistributions in binary form must reproduce the above | |
| # copyright notice, this list of conditions and the following disclaimer | |
| # in the documentation and/or other materials provided with the | |
| # distribution. | |
| # * Neither the name of Google Inc. nor the names of its | |
| # contributors may be used to endorse or promote products derived from | |
| # this software without specific prior written permission. | |
| # | |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| # FIXME: remove this whitespace diff. | |
| # | |
| [MASTER] | |
| # Specify a configuration file. | |
| #rcfile= | |
| # Python code to execute, usually for sys.path manipulation such as | |
| # pygtk.require(). | |
| #init-hook= | |
| # Profiled execution. | |
| profile=no | |
| # Add files or directories to the blacklist. They should be base names, not | |
| # paths. | |
| ignore=CVS | |
| # Pickle collected data for later comparisons. | |
| persistent=yes | |
| # List of plugins (as comma separated values of python modules names) to load, | |
| # usually to register additional checkers. | |
| load-plugins= | |
| [MESSAGES CONTROL] | |
| # Enable the message, report, category or checker with the given id(s). You can | |
| # either give multiple identifier separated by comma (,) or put this option | |
| # multiple time. | |
| #enable= | |
| # Disable the message, report, category or checker with the given id(s). You | |
| # can either give multiple identifier separated by comma (,) or put this option | |
| # multiple time (only on the command line, not in the configuration file where | |
| # it should appear only once). | |
| # CHANGED: | |
| # C0103: Invalid name "" | |
| # C0111: Missing docstring | |
| # C0301: Line too long | |
| # C0302: Too many lines in module (N) | |
| # I0010: Unable to consider inline option '' | |
| # I0011: Locally disabling WNNNN | |
| # | |
| # R0201: Method could be a function | |
| # R0801: Similar lines in N files | |
| # R0901: Too many ancestors (8/7) | |
| # R0902: Too many instance attributes (N/7) | |
| # R0903: Too few public methods (N/2) | |
| # R0904: Too many public methods (N/20) | |
| # R0911: Too many return statements (N/6) | |
| # R0912: Too many branches (N/12) | |
| # R0913: Too many arguments (N/5) | |
| # R0914: Too many local variables (N/15) | |
| # R0915: Too many statements (N/50) | |
| # R0921: Abstract class not referenced | |
| # R0922: Abstract class is only referenced 1 times | |
| # W0122: Use of the exec statement | |
| # W0141: Used builtin function '' | |
| # W0212: Access to a protected member X of a client class | |
| # W0142: Used * or ** magic | |
| # W0401: Wildcard import X | |
| # W0402: Uses of a deprecated module 'string' | |
| # W0404: 41: Reimport 'XX' (imported line NN) | |
| # W0511: TODO | |
| # W0603: Using the global statement | |
| # W0614: Unused import X from wildcard import | |
| # W0703: Catch "Exception" | |
| # W1201: Specify string format arguments as logging function parameters | |
| disable=C0103,C0111,C0301,C0302,I0010,I0011,R0201,R0801,R0901,R0902,R0903,R0904,R0911,R0912,R0913,R0914,R0915,R0921,R0922,W0122,W0141,W0142,W0212,W0401,W0402,W0404,W0511,W0603,W0614,W0703,W1201 | |
| [REPORTS] | |
| # Set the output format. Available formats are text, parseable, colorized, msvs | |
| # (visual studio) and html | |
| output-format=text | |
| # Include message's id in output | |
| include-ids=yes | |
| # Put messages in a separate file for each module / package specified on the | |
| # command line instead of printing them on stdout. Reports (if any) will be | |
| # written in a file name "pylint_global.[txt|html]". | |
| files-output=no | |
| # Tells whether to display a full report or only the messages | |
| # CHANGED: | |
| reports=no | |
| # Python expression which should return a note less than 10 (10 is the highest | |
| # note). You have access to the variables errors warning, statement which | |
| # respectively contain the number of errors / warnings messages and the total | |
| # number of statements analyzed. This is used by the global evaluation report | |
| # (RP0004). | |
| evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) | |
| # Add a comment according to your evaluation note. This is used by the global | |
| # evaluation report (RP0004). | |
| comment=no | |
| [VARIABLES] | |
| # Tells whether we should check for unused import in __init__ files. | |
| init-import=no | |
| # A regular expression matching the beginning of the name of dummy variables | |
| # (i.e. not used). | |
| dummy-variables-rgx=_|dummy | |
| # List of additional names supposed to be defined in builtins. Remember that | |
| # you should avoid to define new builtins when possible. | |
| additional-builtins= | |
| [TYPECHECK] | |
| # Tells whether missing members accessed in mixin class should be ignored. A | |
| # mixin class is detected if its name ends with "mixin" (case insensitive). | |
| ignore-mixin-members=yes | |
| # List of classes names for which member attributes should not be checked | |
| # (useful for classes with attributes dynamically set). | |
| ignored-classes=SQLObject,twisted.internet.reactor,hashlib,google.appengine.api.memcache | |
| # When zope mode is activated, add a predefined set of Zope acquired attributes | |
| # to generated-members. | |
| zope=no | |
| # List of members which are set dynamically and missed by pylint inference | |
| # system, and so shouldn't trigger E0201 when accessed. Python regular | |
| # expressions are accepted. | |
| generated-members=REQUEST,acl_users,aq_parent | |
| [MISCELLANEOUS] | |
| # List of note tags to take in consideration, separated by a comma. | |
| notes=FIXME,XXX,TODO | |
| [SIMILARITIES] | |
| # Minimum lines number of a similarity. | |
| min-similarity-lines=4 | |
| # Ignore comments when computing similarities. | |
| ignore-comments=yes | |
| # Ignore docstrings when computing similarities. | |
| ignore-docstrings=yes | |
| [FORMAT] | |
| # Maximum number of characters on a single line. | |
| max-line-length=200 | |
| # Maximum number of lines in a module | |
| max-module-lines=1000 | |
| # String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 | |
| # tab). | |
| # CHANGED: | |
| indent-string=' ' | |
| [BASIC] | |
| # Required attributes for module, separated by a comma | |
| required-attributes= | |
| # List of builtins function names that should not be used, separated by a comma | |
| bad-functions=map,filter,apply,input | |
| # Regular expression which should only match correct module names | |
| module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ | |
| # Regular expression which should only match correct module level names | |
| const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$ | |
| # Regular expression which should only match correct class names | |
| class-rgx=[A-Z_][a-zA-Z0-9]+$ | |
| # Regular expression which should only match correct function names | |
| function-rgx=[a-z_][a-z0-9_]{2,30}$ | |
| # Regular expression which should only match correct method names | |
| method-rgx=[a-z_][a-z0-9_]{2,30}$ | |
| # Regular expression which should only match correct instance attribute names | |
| attr-rgx=[a-z_][a-z0-9_]{2,30}$ | |
| # Regular expression which should only match correct argument names | |
| argument-rgx=[a-z_][a-z0-9_]{2,30}$ | |
| # Regular expression which should only match correct variable names | |
| variable-rgx=[a-z_][a-z0-9_]{2,30}$ | |
| # Regular expression which should only match correct list comprehension / | |
| # generator expression variable names | |
| inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$ | |
| # Good variable names which should always be accepted, separated by a comma | |
| good-names=i,j,k,ex,Run,_ | |
| # Bad variable names which should always be refused, separated by a comma | |
| bad-names=foo,bar,baz,toto,tutu,tata | |
| # Regular expression which should only match functions or classes name which do | |
| # not require a docstring | |
| no-docstring-rgx=__.*__ | |
| [DESIGN] | |
| # Maximum number of arguments for function / method | |
| max-args=5 | |
| # Argument names that match this expression will be ignored. Default to name | |
| # with leading underscore | |
| ignored-argument-names=_.* | |
| # Maximum number of locals for function / method body | |
| max-locals=15 | |
| # Maximum number of return / yield for function / method body | |
| max-returns=6 | |
| # Maximum number of branch for function / method body | |
| max-branchs=12 | |
| # Maximum number of statements in function / method body | |
| max-statements=50 | |
| # Maximum number of parents for a class (see R0901). | |
| max-parents=7 | |
| # Maximum number of attributes for a class (see R0902). | |
| max-attributes=7 | |
| # Minimum number of public methods for a class (see R0903). | |
| min-public-methods=2 | |
| # Maximum number of public methods for a class (see R0904). | |
| max-public-methods=20 | |
| [CLASSES] | |
| # List of interface methods to ignore, separated by a comma. This is used for | |
| # instance to not check methods defines in Zope's Interface base class. | |
| ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by | |
| # List of method names used to declare (i.e. assign) instance attributes. | |
| defining-attr-methods=__init__,__new__,setUp | |
| # List of valid names for the first argument in a class method. | |
| valid-classmethod-first-arg=cls | |
| [IMPORTS] | |
| # Deprecated modules which should not be used, separated by a comma | |
| deprecated-modules=regsub,string,TERMIOS,Bastion,rexec | |
| # Create a graph of every (i.e. internal and external) dependencies in the | |
| # given file (report RP0402 must not be disabled) | |
| import-graph= | |
| # Create a graph of external dependencies in the given file (report RP0402 must | |
| # not be disabled) | |
| ext-import-graph= | |
| # Create a graph of internal dependencies in the given file (report RP0402 must | |
| # not be disabled) | |
| int-import-graph= | |
| [EXCEPTIONS] | |
| # Exceptions that will emit a warning when being caught. Defaults to | |
| # "Exception" | |
| overgeneral-exceptions=Exception |