| ## | |
| ## httpd.conf -- Apache HTTP server configuration file | |
| ## | |
| # | |
| # Based upon the NCSA server configuration files originally by Rob McCool. | |
| # | |
| # This is the main Apache server configuration file. It contains the | |
| # configuration directives that give the server its instructions. | |
| # See <URL:http://httpd.apache.org/docs/> for detailed information about | |
| # the directives. | |
| # | |
| # Do NOT simply read the instructions in here without understanding | |
| # what they do. They're here only as hints or reminders. If you are unsure | |
| # consult the online docs. You have been warned. | |
| # | |
| # After this file is processed, the server will look for and process | |
| # /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf | |
| # unless you have overridden these with ResourceConfig and/or | |
| # AccessConfig directives here. | |
| # | |
| # The configuration directives are grouped into three basic sections: | |
| # 1. Directives that control the operation of the Apache server process as a | |
| # whole (the 'global environment'). | |
| # 2. Directives that define the parameters of the 'main' or 'default' server, | |
| # which responds to requests that aren't handled by a virtual host. | |
| # These directives also provide default values for the settings | |
| # of all virtual hosts. | |
| # 3. Settings for virtual hosts, which allow Web requests to be sent to | |
| # different IP addresses or hostnames and have them handled by the | |
| # same Apache server process. | |
| # | |
| # Configuration and logfile names: If the filenames you specify for many | |
| # of the server's control files begin with "/" (or "drive:/" for Win32), the | |
| # server will use that explicit path. If the filenames do *not* begin | |
| # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" | |
| # with ServerRoot set to "/usr/local/apache" will be interpreted by the | |
| # server as "/usr/local/apache/logs/foo.log". | |
| # | |
| ### Section 1: Global Environment | |
| # | |
| # The directives in this section affect the overall operation of Apache, | |
| # such as the number of concurrent requests it can handle or where it | |
| # can find its configuration files. | |
| # | |
| # | |
| # ServerType is either inetd, or standalone. Inetd mode is only supported on | |
| # Unix platforms. | |
| # | |
| ServerType standalone | |
| # | |
| # ServerRoot: The top of the directory tree under which the server's | |
| # configuration, error, and log files are kept. | |
| # | |
| # NOTE! If you intend to place this on an NFS (or otherwise network) | |
| # mounted filesystem then please read the LockFile documentation | |
| # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); | |
| # you will save yourself a lot of trouble. | |
| # | |
| #ServerRoot "/usr" | |
| # | |
| # The LockFile directive sets the path to the lockfile used when Apache | |
| # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or | |
| # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at | |
| # its default value. The main reason for changing it is if the logs | |
| # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL | |
| # DISK. The PID of the main server process is automatically appended to | |
| # the filename. | |
| # | |
| #LockFile "/private/var/run/httpd.lock" | |
| # | |
| # PidFile: The file in which the server should record its process | |
| # identification number when it starts. | |
| # | |
| PidFile "/tmp/WebKit/httpd.pid" | |
| # | |
| # ScoreBoardFile: File used to store internal server process information. | |
| # Not all architectures require this. But if yours does (you'll know because | |
| # this file will be created when you run Apache) then you *must* ensure that | |
| # no two invocations of Apache share the same scoreboard file. | |
| # | |
| ScoreBoardFile "/tmp/WebKit/httpd.scoreboard" | |
| # | |
| # In the standard configuration, the server will process httpd.conf (this | |
| # file, specified by the -f command line option), srm.conf, and access.conf | |
| # in that order. The latter two files are now distributed empty, as it is | |
| # recommended that all directives be kept in a single file for simplicity. | |
| # The commented-out values below are the built-in defaults. You can have the | |
| # server ignore these files altogether by using "/dev/null" (for Unix) or | |
| # "nul" (for Win32) for the arguments to the directives. | |
| # | |
| ResourceConfig /dev/null | |
| AccessConfig /dev/null | |
| # | |
| # Timeout: The number of seconds before receives and sends time out. | |
| # | |
| Timeout 300 | |
| # | |
| # KeepAlive: Whether or not to allow persistent connections (more than | |
| # one request per connection). Set to "Off" to deactivate. | |
| # | |
| KeepAlive On | |
| # | |
| # MaxKeepAliveRequests: The maximum number of requests to allow | |
| # during a persistent connection. Set to 0 to allow an unlimited amount. | |
| # We recommend you leave this number high, for maximum performance. | |
| # | |
| MaxKeepAliveRequests 100 | |
| # | |
| # KeepAliveTimeout: Number of seconds to wait for the next request from the | |
| # same client on the same connection. | |
| # | |
| KeepAliveTimeout 15 | |
| # | |
| # Server-pool size regulation. Rather than making you guess how many | |
| # server processes you need, Apache dynamically adapts to the load it | |
| # sees --- that is, it tries to maintain enough server processes to | |
| # handle the current load, plus a few spare servers to handle transient | |
| # load spikes (e.g., multiple simultaneous requests from a single | |
| # Netscape browser). | |
| # | |
| # It does this by periodically checking how many servers are waiting | |
| # for a request. If there are fewer than MinSpareServers, it creates | |
| # a new spare. If there are more than MaxSpareServers, some of the | |
| # spares die off. The default values are probably OK for most sites. | |
| # | |
| MinSpareServers 1 | |
| MaxSpareServers 5 | |
| # | |
| # Number of servers to start initially --- should be a reasonable ballpark | |
| # figure. | |
| # | |
| StartServers 1 | |
| # | |
| # Limit on total number of servers running, i.e., limit on the number | |
| # of clients who can simultaneously connect --- if this limit is ever | |
| # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. | |
| # It is intended mainly as a brake to keep a runaway server from taking | |
| # the system with it as it spirals down... | |
| # | |
| MaxClients 150 | |
| # | |
| # MaxRequestsPerChild: the number of requests each child process is | |
| # allowed to process before the child dies. The child will exit so | |
| # as to avoid problems after prolonged use when Apache (and maybe the | |
| # libraries it uses) leak memory or other resources. On most systems, this | |
| # isn't really needed, but a few (such as Solaris) do have notable leaks | |
| # in the libraries. For these platforms, set to something like 10000 | |
| # or so; a setting of 0 means unlimited. | |
| # | |
| # NOTE: This value does not include keepalive requests after the initial | |
| # request per connection. For example, if a child process handles | |
| # an initial request and 10 subsequent "keptalive" requests, it | |
| # would only count as 1 request towards this limit. | |
| # | |
| MaxRequestsPerChild 100000 | |
| # | |
| # Listen: Allows you to bind Apache to specific IP addresses and/or | |
| # ports, instead of the default. See also the <VirtualHost> | |
| # directive. | |
| # | |
| # Configured from the httpd command line for WebKit layout tests. | |
| # | |
| Listen 127.0.0.1:8000 | |
| Listen 127.0.0.1:8080 | |
| Listen 127.0.0.1:8081 | |
| Listen 127.0.0.1:9000 | |
| Listen 127.0.0.1:9080 | |
| # | |
| # Dynamic Shared Object (DSO) Support | |
| # | |
| # To be able to use the functionality of a module which was built as a DSO you | |
| # have to place corresponding `LoadModule' lines at this location so the | |
| # directives contained in it are actually available _before_ they are used. | |
| # Please read the file http://httpd.apache.org/docs/dso.html for more | |
| # details about the DSO mechanism and run `httpd -l' for the list of already | |
| # built-in (statically linked and thus always available) modules in your httpd | |
| # binary. | |
| # | |
| # Note: The order in which modules are loaded is important. Don't change | |
| # the order below without expert advice. | |
| # | |
| # Example: | |
| # LoadModule foo_module lib/apache/mod_foo.dll | |
| #LoadModule vhost_alias_module lib/apache/mod_vhost_alias.dll | |
| #LoadModule env_module lib/apache/mod_env.dll | |
| LoadModule config_log_module lib/apache/mod_log_config.dll | |
| #LoadModule mime_magic_module lib/apache/mod_mime_magic.dll | |
| LoadModule mime_module lib/apache/mod_mime.dll | |
| LoadModule negotiation_module lib/apache/mod_negotiation.dll | |
| #LoadModule status_module lib/apache/mod_status.dll | |
| #LoadModule info_module lib/apache/mod_info.dll | |
| LoadModule includes_module lib/apache/mod_include.dll | |
| LoadModule autoindex_module lib/apache/mod_autoindex.dll | |
| #LoadModule dir_module lib/apache/mod_dir.dll | |
| LoadModule cgi_module lib/apache/mod_cgi.dll | |
| LoadModule asis_module lib/apache/mod_asis.dll | |
| LoadModule imap_module lib/apache/mod_imap.dll | |
| LoadModule action_module lib/apache/mod_actions.dll | |
| #LoadModule speling_module lib/apache/mod_speling.dll | |
| #LoadModule userdir_module lib/apache/mod_userdir.dll | |
| LoadModule alias_module lib/apache/mod_alias.dll | |
| LoadModule rewrite_module lib/apache/mod_rewrite.dll | |
| LoadModule access_module lib/apache/mod_access.dll | |
| LoadModule auth_module lib/apache/mod_auth.dll | |
| #LoadModule anon_auth_module lib/apache/mod_auth_anon.dll | |
| #LoadModule dbm_auth_module lib/apache/mod_auth_dbm.dll | |
| #LoadModule digest_module lib/apache/mod_digest.dll | |
| #LoadModule proxy_module lib/apache/libproxy.dll | |
| #LoadModule cern_meta_module lib/apache/mod_cern_meta.dll | |
| #LoadModule expires_module lib/apache/mod_expires.dll | |
| LoadModule headers_module lib/apache/mod_headers.dll | |
| #LoadModule usertrack_module lib/apache/mod_usertrack.dll | |
| #LoadModule log_forensic_module lib/apache/mod_log_forensic.dll | |
| #LoadModule unique_id_module lib/apache/mod_unique_id.dll | |
| #LoadModule setenvif_module lib/apache/mod_setenvif.dll | |
| #LoadModule dav_module lib/apache/libdav.dll | |
| #LoadModule ssl_module lib/apache/libssl.dll | |
| #LoadModule perl_module lib/apache/libperl.dll | |
| #LoadModule php4_module lib/apache/libphp4.dll | |
| #LoadModule hfs_apple_module lib/apache/mod_hfs_apple.dll | |
| #LoadModule bonjour_module lib/apache/mod_bonjour.dll | |
| # Reconstruction of the complete module list from all available modules | |
| # (static and shared ones) to achieve correct module execution order. | |
| # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] | |
| ClearModuleList | |
| #AddModule mod_vhost_alias.c | |
| #AddModule mod_env.c | |
| AddModule mod_log_config.c | |
| #AddModule mod_mime_magic.c | |
| AddModule mod_mime.c | |
| AddModule mod_negotiation.c | |
| #AddModule mod_status.c | |
| #AddModule mod_info.c | |
| AddModule mod_include.c | |
| AddModule mod_autoindex.c | |
| #AddModule mod_dir.c | |
| AddModule mod_cgi.c | |
| AddModule mod_asis.c | |
| AddModule mod_imap.c | |
| AddModule mod_actions.c | |
| #AddModule mod_speling.c | |
| #AddModule mod_userdir.c | |
| AddModule mod_alias.c | |
| AddModule mod_rewrite.c | |
| AddModule mod_access.c | |
| AddModule mod_auth.c | |
| #AddModule mod_auth_anon.c | |
| #AddModule mod_auth_dbm.c | |
| #AddModule mod_digest.c | |
| #AddModule mod_proxy.c | |
| #AddModule mod_cern_meta.c | |
| #AddModule mod_expires.c | |
| AddModule mod_headers.c | |
| #AddModule mod_usertrack.c | |
| #AddModule mod_log_forensic.c | |
| #AddModule mod_unique_id.c | |
| AddModule mod_so.c | |
| #AddModule mod_setenvif.c | |
| #AddModule mod_dav.c | |
| #AddModule mod_ssl.c | |
| #AddModule mod_perl.c | |
| #AddModule mod_php4.c | |
| #AddModule mod_hfs_apple.c | |
| #AddModule mod_bonjour.c | |
| ### Section 2: 'Main' server configuration | |
| # | |
| # The directives in this section set up the values used by the 'main' | |
| # server, which responds to any requests that aren't handled by a | |
| # <VirtualHost> definition. These values also provide defaults for | |
| # any <VirtualHost> containers you may define later in the file. | |
| # | |
| # All of these directives may appear inside <VirtualHost> containers, | |
| # in which case these default settings will be overridden for the | |
| # virtual host being defined. | |
| # | |
| # | |
| # ServerName allows you to set a host name which is sent back to clients for | |
| # your server if it's different than the one the program would get (i.e., use | |
| # "www" instead of the host's real name). | |
| # | |
| # Note: You cannot just invent host names and hope they work. The name you | |
| # define here must be a valid DNS name for your host. If you don't understand | |
| # this, ask your network administrator. | |
| # If your host doesn't have a registered DNS name, enter its IP address here. | |
| # You will have to access it by its address (e.g., http://123.45.67.89/) | |
| # anyway, and this will make redirections work in a sensible way. | |
| # | |
| # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your | |
| # machine always knows itself by this address. If you use Apache strictly for | |
| # local testing and development, you may use 127.0.0.1 as the server name. | |
| # | |
| ServerName 127.0.0.1 | |
| # | |
| # DocumentRoot: The directory out of which you will serve your | |
| # documents. By default, all requests are taken from this directory, but | |
| # symbolic links and aliases may be used to point to other locations. | |
| # | |
| # Configured from the httpd command line for WebKit layout tests. | |
| #DocumentRoot "/Library/WebServer/Documents" | |
| # | |
| # Each directory to which Apache has access, can be configured with respect | |
| # to which services and features are allowed and/or disabled in that | |
| # directory (and its subdirectories). | |
| # | |
| <Directory /> | |
| # | |
| # This may also be "None", "All", or any combination of "Indexes", | |
| # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". | |
| # | |
| # Note that "MultiViews" must be named *explicitly* --- "Options All" | |
| # doesn't give it to you. | |
| # | |
| Options Indexes FollowSymLinks MultiViews ExecCGI Includes | |
| # | |
| # This controls which options the .htaccess files in directories can | |
| # override. Can also be "All", or any combination of "Options", "FileInfo", | |
| # "AuthConfig", and "Limit" | |
| # | |
| AllowOverride All | |
| # | |
| # Controls who can get stuff from this server. | |
| # | |
| Order allow,deny | |
| Allow from all | |
| </Directory> | |
| # | |
| # AccessFileName: The name of the file to look for in each directory | |
| # for access control information. | |
| # | |
| AccessFileName .htaccess | |
| # | |
| # The following lines prevent .htaccess files from being viewed by | |
| # Web clients. Since .htaccess files often contain authorization | |
| # information, access is disallowed for security reasons. Comment | |
| # these lines out if you want Web visitors to see the contents of | |
| # .htaccess files. If you change the AccessFileName directive above, | |
| # be sure to make the corresponding changes here. | |
| # | |
| # Also, folks tend to use names such as .htpasswd for password | |
| # files, so this will protect those as well. | |
| # | |
| <Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])"> | |
| Order allow,deny | |
| Deny from all | |
| Satisfy All | |
| </Files> | |
| # | |
| # Apple specific filesystem protection. | |
| # | |
| <Files "rsrc"> | |
| Order allow,deny | |
| Deny from all | |
| Satisfy All | |
| </Files> | |
| <Directory ~ ".*\.\.namedfork"> | |
| Order allow,deny | |
| Deny from all | |
| Satisfy All | |
| </Directory> | |
| # | |
| # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each | |
| # document that was negotiated on the basis of content. This asks proxy | |
| # servers not to cache the document. Uncommenting the following line disables | |
| # this behavior, and proxies will be allowed to cache the documents. | |
| # | |
| #CacheNegotiatedDocs | |
| # | |
| # UseCanonicalName: (new for 1.3) With this setting turned on, whenever | |
| # Apache needs to construct a self-referencing URL (a URL that refers back | |
| # to the server the response is coming from) it will use ServerName and | |
| # Port to form a "canonical" name. With this setting off, Apache will | |
| # use the hostname:port that the client supplied, when possible. This | |
| # also affects SERVER_NAME and SERVER_PORT in CGI scripts. | |
| # | |
| UseCanonicalName On | |
| # | |
| # TypesConfig describes where the mime.types file (or equivalent) is | |
| # to be found. | |
| # | |
| # Configured from the httpd command line for WebKit layout tests. | |
| # | |
| #<IfModule mod_mime.c> | |
| # TypesConfig /private/etc/httpd/mime.types | |
| #</IfModule> | |
| # | |
| # DefaultType is the default MIME type the server will use for a document | |
| # if it cannot otherwise determine one, such as from filename extensions. | |
| # If your server contains mostly text or HTML documents, "text/plain" is | |
| # a good value. If most of your content is binary, such as applications | |
| # or images, you may want to use "application/octet-stream" instead to | |
| # keep browsers from trying to display binary files as though they are | |
| # text. | |
| # | |
| DefaultType text/plain | |
| # | |
| # HostnameLookups: Log the names of clients or just their IP addresses | |
| # e.g., www.apache.org (on) or 204.62.129.132 (off). | |
| # The default is off because it'd be overall better for the net if people | |
| # had to knowingly turn this feature on, since enabling it means that | |
| # each client request will result in AT LEAST one lookup request to the | |
| # nameserver. | |
| # | |
| HostnameLookups Off | |
| # | |
| # ErrorLog: The location of the error log file. | |
| # If you do not specify an ErrorLog directive within a <VirtualHost> | |
| # container, error messages relating to that virtual host will be | |
| # logged here. If you *do* define an error logfile for a <VirtualHost> | |
| # container, that host's errors will be logged there and not here. | |
| # | |
| # Configured from the httpd command line for WebKit layout tests. | |
| #ErrorLog "/tmp/layout-test-results/error_log" | |
| # | |
| # LogLevel: Control the number of messages logged to the error_log. | |
| # Possible values include: debug, info, notice, warn, error, crit, | |
| # alert, emerg. | |
| # | |
| LogLevel warn | |
| # | |
| # The following directives define some format nicknames for use with | |
| # a CustomLog directive (see below). | |
| # | |
| LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined | |
| LogFormat "%p %h %l %u %t \"%r\" %>s %b" common | |
| LogFormat "%{Referer}i -> %U" referer | |
| LogFormat "%{User-agent}i" agent | |
| # | |
| # The location and format of the access logfile (Common Logfile Format). | |
| # If you do not define any access logfiles within a <VirtualHost> | |
| # container, they will be logged here. Contrariwise, if you *do* | |
| # define per-<VirtualHost> access logfiles, transactions will be | |
| # logged therein and *not* in this file. | |
| # | |
| # Configured from the httpd command line for WebKit layout tests. | |
| #CustomLog "/tmp/layout-test-results/access_log" common | |
| # | |
| # If you prefer a single logfile with access, agent, and referer information | |
| # (Combined Logfile Format) you can use the following directive. | |
| # | |
| #CustomLog "/tmp/layout-test-results/access_log" combined | |
| # | |
| # Optionally add a line containing the server version and virtual host | |
| # name to server-generated pages (error documents, FTP directory listings, | |
| # mod_status and mod_info output etc., but not CGI generated documents). | |
| # Set to "EMail" to also include a mailto: link to the ServerAdmin. | |
| # Set to one of: On | Off | EMail | |
| # | |
| ServerSignature On | |
| # | |
| # Aliases: Add here as many aliases as you need (with no limit). The format is | |
| # Alias fakename realname | |
| # | |
| <IfModule mod_alias.c> | |
| </IfModule> | |
| # End of aliases. | |
| # | |
| # Redirect allows you to tell clients about documents which used to exist in | |
| # your server's namespace, but do not anymore. This allows you to tell the | |
| # clients where to look for the relocated document. | |
| # Format: Redirect old-URI new-URL | |
| # | |
| # | |
| # Document types. | |
| # | |
| <IfModule mod_mime.c> | |
| # | |
| # AddLanguage allows you to specify the language of a document. You can | |
| # then use content negotiation to give a browser a file in a language | |
| # it can understand. | |
| # | |
| # Note 1: The suffix does not have to be the same as the language | |
| # keyword --- those with documents in Polish (whose net-standard | |
| # language code is pl) may wish to use "AddLanguage pl .po" to | |
| # avoid the ambiguity with the common suffix for perl scripts. | |
| # | |
| # Note 2: The example entries below illustrate that in quite | |
| # some cases the two character 'Language' abbreviation is not | |
| # identical to the two character 'Country' code for its country, | |
| # E.g. 'Danmark/dk' versus 'Danish/da'. | |
| # | |
| # Note 3: In the case of 'ltz' we violate the RFC by using a three char | |
| # specifier. But there is 'work in progress' to fix this and get | |
| # the reference data for rfc1766 cleaned up. | |
| # | |
| # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) | |
| # French (fr) - German (de) - Greek-Modern (el) | |
| # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn) | |
| # Portugese (pt) - Luxembourgeois* (ltz) | |
| # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs) | |
| # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) | |
| # Russian (ru) | |
| # | |
| AddLanguage da .dk | |
| AddLanguage nl .nl | |
| AddLanguage en .en | |
| AddLanguage et .ee | |
| AddLanguage fr .fr | |
| AddLanguage de .de | |
| AddLanguage el .el | |
| AddLanguage he .he | |
| AddCharset ISO-8859-8 .iso8859-8 | |
| AddLanguage it .it | |
| AddLanguage ja .ja | |
| AddCharset ISO-2022-JP .jis | |
| AddLanguage kr .kr | |
| AddCharset ISO-2022-KR .iso-kr | |
| AddLanguage nn .nn | |
| AddLanguage no .no | |
| AddLanguage pl .po | |
| AddCharset ISO-8859-2 .iso-pl | |
| AddLanguage pt .pt | |
| AddLanguage pt-br .pt-br | |
| AddLanguage ltz .lu | |
| AddLanguage ca .ca | |
| AddLanguage es .es | |
| AddLanguage sv .sv | |
| AddLanguage cs .cz .cs | |
| AddLanguage ru .ru | |
| AddLanguage zh-TW .zh-tw | |
| AddCharset Big5 .Big5 .big5 | |
| AddCharset WINDOWS-1251 .cp-1251 | |
| AddCharset CP866 .cp866 | |
| AddCharset ISO-8859-5 .iso-ru | |
| AddCharset KOI8-R .koi8-r | |
| AddCharset UCS-2 .ucs2 | |
| AddCharset UCS-4 .ucs4 | |
| AddCharset UTF-8 .utf8 | |
| # LanguagePriority allows you to give precedence to some languages | |
| # in case of a tie during content negotiation. | |
| # | |
| # Just list the languages in decreasing order of preference. We have | |
| # more or less alphabetized them here. You probably want to change this. | |
| # | |
| <IfModule mod_negotiation.c> | |
| LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw | |
| </IfModule> | |
| # | |
| # AddType allows you to tweak mime.types without actually editing it, or to | |
| # make certain files to be certain types. | |
| # | |
| AddType application/x-tar .tgz | |
| # | |
| # AddEncoding allows you to have certain browsers uncompress | |
| # information on the fly. Note: Not all browsers support this. | |
| # Despite the name similarity, the following Add* directives have nothing | |
| # to do with the FancyIndexing customization directives above. | |
| # | |
| AddEncoding x-compress .Z | |
| AddEncoding x-gzip .gz .tgz | |
| # | |
| # If the AddEncoding directives above are commented-out, then you | |
| # probably should define those extensions to indicate media types: | |
| # | |
| #AddType application/x-compress .Z | |
| #AddType application/x-gzip .gz .tgz | |
| # | |
| # AddHandler allows you to map certain file extensions to "handlers", | |
| # actions unrelated to filetype. These can be either built into the server | |
| # or added with the Action command (see below) | |
| # | |
| # If you want to use server side includes, or CGI outside | |
| # ScriptAliased directories, uncomment the following lines. | |
| # | |
| # To use CGI scripts: | |
| # | |
| AddHandler cgi-script .cgi .pl | |
| # | |
| # To use server-parsed HTML files | |
| # | |
| AddType text/html .shtml | |
| AddHandler server-parsed .shtml | |
| # | |
| # Uncomment the following line to enable Apache's send-asis HTTP file | |
| # feature | |
| # | |
| AddHandler send-as-is asis | |
| # | |
| # If you wish to use server-parsed imagemap files, use | |
| # | |
| #AddHandler imap-file map | |
| # | |
| # To enable type maps, you might want to use | |
| # | |
| #AddHandler type-map var | |
| </IfModule> | |
| # End of document types. | |
| # | |
| # Action lets you define media types that will execute a script whenever | |
| # a matching file is called. This eliminates the need for repeated URL | |
| # pathnames for oft-used CGI file processors. | |
| # Format: Action media/type /cgi-script/location | |
| # Format: Action handler-name /cgi-script/location | |
| # | |
| # | |
| # MetaDir: specifies the name of the directory in which Apache can find | |
| # meta information files. These files contain additional HTTP headers | |
| # to include when sending the document | |
| # | |
| #MetaDir .web | |
| # | |
| # MetaSuffix: specifies the file name suffix for the file containing the | |
| # meta information. | |
| # | |
| #MetaSuffix .meta | |
| # | |
| # Customizable error response (Apache style) | |
| # these come in three flavors | |
| # | |
| # 1) plain text | |
| #ErrorDocument 500 "The server made a boo boo. | |
| # n.b. the single leading (") marks it as text, it does not get output | |
| # | |
| # 2) local redirects | |
| #ErrorDocument 404 /missing.html | |
| # to redirect to local URL /missing.html | |
| #ErrorDocument 404 /cgi-bin/missing_handler.pl | |
| # N.B.: You can redirect to a script or a document using server-side-includes. | |
| # | |
| # 3) external redirects | |
| #ErrorDocument 402 http://some.other-server.com/subscription_info.html | |
| # N.B.: Many of the environment variables associated with the original | |
| # request will *not* be available to such a script. | |
| # | |
| # Proxy Server directives. Uncomment the following lines to | |
| # enable the proxy server: | |
| # | |
| #<IfModule mod_proxy.c> | |
| # ProxyRequests On | |
| # <Directory proxy:*> | |
| # Order deny,allow | |
| # Deny from all | |
| # Allow from .your-domain.com | |
| # </Directory> | |
| # | |
| # Enable/disable the handling of HTTP/1.1 "Via:" headers. | |
| # ("Full" adds the server version; "Block" removes all outgoing Via: headers) | |
| # Set to one of: Off | On | Full | Block | |
| # | |
| # ProxyVia On | |
| # | |
| # To enable the cache as well, edit and uncomment the following lines: | |
| # (no cacheing without CacheRoot) | |
| # | |
| # CacheRoot "/private/var/run/proxy" | |
| # CacheSize 5 | |
| # CacheGcInterval 4 | |
| # CacheMaxExpire 24 | |
| # CacheLastModifiedFactor 0.1 | |
| # CacheDefaultExpire 1 | |
| # NoCache a-domain.com another-domain.edu joes.garage-sale.com | |
| #</IfModule> | |
| # End of proxy directives. | |
| <IfModule mod_php4.c> | |
| # If php is turned on, we repsect .php and .phps files. | |
| AddType application/x-httpd-php .php | |
| AddType application/x-httpd-php-source .phps | |
| # Since most users will want index.php to work we | |
| # also automatically enable index.php | |
| <IfModule mod_dir.c> | |
| DirectoryIndex index.html index.php | |
| </IfModule> | |
| </IfModule> | |
| <IfModule mod_rewrite.c> | |
| RewriteEngine On | |
| RewriteCond %{REQUEST_METHOD} ^TRACE | |
| RewriteRule .* - [F] | |
| </IfModule> |