| /* |
| * Copyright (c) 2010 The WebM project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <assert.h> |
| #include <limits.h> |
| #include <stdio.h> |
| |
| #include "./vp10_rtcd.h" |
| #include "./vpx_dsp_rtcd.h" |
| #include "./vpx_scale_rtcd.h" |
| |
| #include "vpx_mem/vpx_mem.h" |
| #include "vpx_ports/system_state.h" |
| #include "vpx_ports/vpx_once.h" |
| #include "vpx_ports/vpx_timer.h" |
| #include "vpx_scale/vpx_scale.h" |
| #include "vpx_util/vpx_thread.h" |
| |
| #include "vp10/common/alloccommon.h" |
| #include "vp10/common/loopfilter.h" |
| #include "vp10/common/onyxc_int.h" |
| #if CONFIG_VP9_POSTPROC |
| #include "vp10/common/postproc.h" |
| #endif |
| #include "vp10/common/quant_common.h" |
| #include "vp10/common/reconintra.h" |
| |
| #include "vp10/decoder/decodeframe.h" |
| #include "vp10/decoder/decoder.h" |
| #include "vp10/decoder/detokenize.h" |
| |
| static void initialize_dec(void) { |
| static volatile int init_done = 0; |
| |
| if (!init_done) { |
| vp10_rtcd(); |
| vpx_dsp_rtcd(); |
| vpx_scale_rtcd(); |
| vp10_init_intra_predictors(); |
| init_done = 1; |
| } |
| } |
| |
| static void vp10_dec_setup_mi(VP10_COMMON *cm) { |
| cm->mi = cm->mip + cm->mi_stride + 1; |
| cm->mi_grid_visible = cm->mi_grid_base + cm->mi_stride + 1; |
| memset(cm->mi_grid_base, 0, |
| cm->mi_stride * (cm->mi_rows + 1) * sizeof(*cm->mi_grid_base)); |
| } |
| |
| static int vp10_dec_alloc_mi(VP10_COMMON *cm, int mi_size) { |
| cm->mip = vpx_calloc(mi_size, sizeof(*cm->mip)); |
| if (!cm->mip) |
| return 1; |
| cm->mi_alloc_size = mi_size; |
| cm->mi_grid_base = (MODE_INFO **)vpx_calloc(mi_size, sizeof(MODE_INFO*)); |
| if (!cm->mi_grid_base) |
| return 1; |
| return 0; |
| } |
| |
| static void vp10_dec_free_mi(VP10_COMMON *cm) { |
| vpx_free(cm->mip); |
| cm->mip = NULL; |
| vpx_free(cm->mi_grid_base); |
| cm->mi_grid_base = NULL; |
| } |
| |
| VP10Decoder *vp10_decoder_create(BufferPool *const pool) { |
| VP10Decoder *volatile const pbi = vpx_memalign(32, sizeof(*pbi)); |
| VP10_COMMON *volatile const cm = pbi ? &pbi->common : NULL; |
| |
| if (!cm) |
| return NULL; |
| |
| vp10_zero(*pbi); |
| |
| if (setjmp(cm->error.jmp)) { |
| cm->error.setjmp = 0; |
| vp10_decoder_remove(pbi); |
| return NULL; |
| } |
| |
| cm->error.setjmp = 1; |
| |
| CHECK_MEM_ERROR(cm, cm->fc, |
| (FRAME_CONTEXT *)vpx_calloc(1, sizeof(*cm->fc))); |
| CHECK_MEM_ERROR(cm, cm->frame_contexts, |
| (FRAME_CONTEXT *)vpx_calloc(FRAME_CONTEXTS, |
| sizeof(*cm->frame_contexts))); |
| |
| pbi->need_resync = 1; |
| once(initialize_dec); |
| |
| // Initialize the references to not point to any frame buffers. |
| memset(&cm->ref_frame_map, -1, sizeof(cm->ref_frame_map)); |
| memset(&cm->next_ref_frame_map, -1, sizeof(cm->next_ref_frame_map)); |
| |
| cm->current_video_frame = 0; |
| pbi->ready_for_new_data = 1; |
| pbi->common.buffer_pool = pool; |
| |
| cm->bit_depth = VPX_BITS_8; |
| cm->dequant_bit_depth = VPX_BITS_8; |
| |
| cm->alloc_mi = vp10_dec_alloc_mi; |
| cm->free_mi = vp10_dec_free_mi; |
| cm->setup_mi = vp10_dec_setup_mi; |
| |
| vp10_loop_filter_init(cm); |
| |
| cm->error.setjmp = 0; |
| |
| vpx_get_worker_interface()->init(&pbi->lf_worker); |
| |
| return pbi; |
| } |
| |
| void vp10_decoder_remove(VP10Decoder *pbi) { |
| int i; |
| |
| if (!pbi) |
| return; |
| |
| vpx_get_worker_interface()->end(&pbi->lf_worker); |
| vpx_free(pbi->lf_worker.data1); |
| vpx_free(pbi->tile_data); |
| for (i = 0; i < pbi->num_tile_workers; ++i) { |
| VPxWorker *const worker = &pbi->tile_workers[i]; |
| vpx_get_worker_interface()->end(worker); |
| } |
| vpx_free(pbi->tile_worker_data); |
| vpx_free(pbi->tile_worker_info); |
| vpx_free(pbi->tile_workers); |
| |
| if (pbi->num_tile_workers > 0) { |
| vp10_loop_filter_dealloc(&pbi->lf_row_sync); |
| } |
| |
| vpx_free(pbi); |
| } |
| |
| static int equal_dimensions(const YV12_BUFFER_CONFIG *a, |
| const YV12_BUFFER_CONFIG *b) { |
| return a->y_height == b->y_height && a->y_width == b->y_width && |
| a->uv_height == b->uv_height && a->uv_width == b->uv_width; |
| } |
| |
| vpx_codec_err_t vp10_copy_reference_dec(VP10Decoder *pbi, |
| VP9_REFFRAME ref_frame_flag, |
| YV12_BUFFER_CONFIG *sd) { |
| VP10_COMMON *cm = &pbi->common; |
| |
| /* TODO(jkoleszar): The decoder doesn't have any real knowledge of what the |
| * encoder is using the frame buffers for. This is just a stub to keep the |
| * vpxenc --test-decode functionality working, and will be replaced in a |
| * later commit that adds VP9-specific controls for this functionality. |
| */ |
| if (ref_frame_flag == VP9_LAST_FLAG) { |
| const YV12_BUFFER_CONFIG *const cfg = get_ref_frame(cm, 0); |
| if (cfg == NULL) { |
| vpx_internal_error(&cm->error, VPX_CODEC_ERROR, |
| "No 'last' reference frame"); |
| return VPX_CODEC_ERROR; |
| } |
| if (!equal_dimensions(cfg, sd)) |
| vpx_internal_error(&cm->error, VPX_CODEC_ERROR, |
| "Incorrect buffer dimensions"); |
| else |
| vp8_yv12_copy_frame(cfg, sd); |
| } else { |
| vpx_internal_error(&cm->error, VPX_CODEC_ERROR, |
| "Invalid reference frame"); |
| } |
| |
| return cm->error.error_code; |
| } |
| |
| |
| vpx_codec_err_t vp10_set_reference_dec(VP10_COMMON *cm, |
| VP9_REFFRAME ref_frame_flag, |
| YV12_BUFFER_CONFIG *sd) { |
| RefBuffer *ref_buf = NULL; |
| RefCntBuffer *const frame_bufs = cm->buffer_pool->frame_bufs; |
| |
| // TODO(jkoleszar): The decoder doesn't have any real knowledge of what the |
| // encoder is using the frame buffers for. This is just a stub to keep the |
| // vpxenc --test-decode functionality working, and will be replaced in a |
| // later commit that adds VP9-specific controls for this functionality. |
| if (ref_frame_flag == VP9_LAST_FLAG) { |
| ref_buf = &cm->frame_refs[0]; |
| } else if (ref_frame_flag == VP9_GOLD_FLAG) { |
| ref_buf = &cm->frame_refs[1]; |
| } else if (ref_frame_flag == VP9_ALT_FLAG) { |
| ref_buf = &cm->frame_refs[2]; |
| } else { |
| vpx_internal_error(&cm->error, VPX_CODEC_ERROR, |
| "Invalid reference frame"); |
| return cm->error.error_code; |
| } |
| |
| if (!equal_dimensions(ref_buf->buf, sd)) { |
| vpx_internal_error(&cm->error, VPX_CODEC_ERROR, |
| "Incorrect buffer dimensions"); |
| } else { |
| int *ref_fb_ptr = &ref_buf->idx; |
| |
| // Find an empty frame buffer. |
| const int free_fb = get_free_fb(cm); |
| if (cm->new_fb_idx == INVALID_IDX) |
| return VPX_CODEC_MEM_ERROR; |
| |
| // Decrease ref_count since it will be increased again in |
| // ref_cnt_fb() below. |
| --frame_bufs[free_fb].ref_count; |
| |
| // Manage the reference counters and copy image. |
| ref_cnt_fb(frame_bufs, ref_fb_ptr, free_fb); |
| ref_buf->buf = &frame_bufs[*ref_fb_ptr].buf; |
| vp8_yv12_copy_frame(sd, ref_buf->buf); |
| } |
| |
| return cm->error.error_code; |
| } |
| |
| /* If any buffer updating is signaled it should be done here. */ |
| static void swap_frame_buffers(VP10Decoder *pbi) { |
| int ref_index = 0, mask; |
| VP10_COMMON *const cm = &pbi->common; |
| BufferPool *const pool = cm->buffer_pool; |
| RefCntBuffer *const frame_bufs = cm->buffer_pool->frame_bufs; |
| |
| lock_buffer_pool(pool); |
| for (mask = pbi->refresh_frame_flags; mask; mask >>= 1) { |
| const int old_idx = cm->ref_frame_map[ref_index]; |
| // Current thread releases the holding of reference frame. |
| decrease_ref_count(old_idx, frame_bufs, pool); |
| |
| // Release the reference frame in reference map. |
| if ((mask & 1) && old_idx >= 0) { |
| decrease_ref_count(old_idx, frame_bufs, pool); |
| } |
| cm->ref_frame_map[ref_index] = cm->next_ref_frame_map[ref_index]; |
| ++ref_index; |
| } |
| |
| // Current thread releases the holding of reference frame. |
| for (; ref_index < REF_FRAMES && !cm->show_existing_frame; ++ref_index) { |
| const int old_idx = cm->ref_frame_map[ref_index]; |
| decrease_ref_count(old_idx, frame_bufs, pool); |
| cm->ref_frame_map[ref_index] = cm->next_ref_frame_map[ref_index]; |
| } |
| unlock_buffer_pool(pool); |
| pbi->hold_ref_buf = 0; |
| cm->frame_to_show = get_frame_new_buffer(cm); |
| |
| if (!cm->frame_parallel_decode || !cm->show_frame) { |
| lock_buffer_pool(pool); |
| --frame_bufs[cm->new_fb_idx].ref_count; |
| unlock_buffer_pool(pool); |
| } |
| |
| // Invalidate these references until the next frame starts. |
| for (ref_index = 0; ref_index < 3; ref_index++) |
| cm->frame_refs[ref_index].idx = -1; |
| } |
| |
| int vp10_receive_compressed_data(VP10Decoder *pbi, |
| size_t size, const uint8_t **psource) { |
| VP10_COMMON *volatile const cm = &pbi->common; |
| BufferPool *volatile const pool = cm->buffer_pool; |
| RefCntBuffer *volatile const frame_bufs = cm->buffer_pool->frame_bufs; |
| const uint8_t *source = *psource; |
| int retcode = 0; |
| cm->error.error_code = VPX_CODEC_OK; |
| |
| if (size == 0) { |
| // This is used to signal that we are missing frames. |
| // We do not know if the missing frame(s) was supposed to update |
| // any of the reference buffers, but we act conservative and |
| // mark only the last buffer as corrupted. |
| // |
| // TODO(jkoleszar): Error concealment is undefined and non-normative |
| // at this point, but if it becomes so, [0] may not always be the correct |
| // thing to do here. |
| if (cm->frame_refs[0].idx > 0) { |
| assert(cm->frame_refs[0].buf != NULL); |
| cm->frame_refs[0].buf->corrupted = 1; |
| } |
| } |
| |
| pbi->ready_for_new_data = 0; |
| |
| // Check if the previous frame was a frame without any references to it. |
| // Release frame buffer if not decoding in frame parallel mode. |
| if (!cm->frame_parallel_decode && cm->new_fb_idx >= 0 |
| && frame_bufs[cm->new_fb_idx].ref_count == 0) |
| pool->release_fb_cb(pool->cb_priv, |
| &frame_bufs[cm->new_fb_idx].raw_frame_buffer); |
| // Find a free frame buffer. Return error if can not find any. |
| cm->new_fb_idx = get_free_fb(cm); |
| if (cm->new_fb_idx == INVALID_IDX) |
| return VPX_CODEC_MEM_ERROR; |
| |
| // Assign a MV array to the frame buffer. |
| cm->cur_frame = &pool->frame_bufs[cm->new_fb_idx]; |
| |
| pbi->hold_ref_buf = 0; |
| if (cm->frame_parallel_decode) { |
| VPxWorker *const worker = pbi->frame_worker_owner; |
| vp10_frameworker_lock_stats(worker); |
| frame_bufs[cm->new_fb_idx].frame_worker_owner = worker; |
| // Reset decoding progress. |
| pbi->cur_buf = &frame_bufs[cm->new_fb_idx]; |
| pbi->cur_buf->row = -1; |
| pbi->cur_buf->col = -1; |
| vp10_frameworker_unlock_stats(worker); |
| } else { |
| pbi->cur_buf = &frame_bufs[cm->new_fb_idx]; |
| } |
| |
| |
| if (setjmp(cm->error.jmp)) { |
| const VPxWorkerInterface *const winterface = vpx_get_worker_interface(); |
| int i; |
| |
| cm->error.setjmp = 0; |
| pbi->ready_for_new_data = 1; |
| |
| // Synchronize all threads immediately as a subsequent decode call may |
| // cause a resize invalidating some allocations. |
| winterface->sync(&pbi->lf_worker); |
| for (i = 0; i < pbi->num_tile_workers; ++i) { |
| winterface->sync(&pbi->tile_workers[i]); |
| } |
| |
| lock_buffer_pool(pool); |
| // Release all the reference buffers if worker thread is holding them. |
| if (pbi->hold_ref_buf == 1) { |
| int ref_index = 0, mask; |
| for (mask = pbi->refresh_frame_flags; mask; mask >>= 1) { |
| const int old_idx = cm->ref_frame_map[ref_index]; |
| // Current thread releases the holding of reference frame. |
| decrease_ref_count(old_idx, frame_bufs, pool); |
| |
| // Release the reference frame in reference map. |
| if ((mask & 1) && old_idx >= 0) { |
| decrease_ref_count(old_idx, frame_bufs, pool); |
| } |
| ++ref_index; |
| } |
| |
| // Current thread releases the holding of reference frame. |
| for (; ref_index < REF_FRAMES && !cm->show_existing_frame; ++ref_index) { |
| const int old_idx = cm->ref_frame_map[ref_index]; |
| decrease_ref_count(old_idx, frame_bufs, pool); |
| } |
| pbi->hold_ref_buf = 0; |
| } |
| // Release current frame. |
| decrease_ref_count(cm->new_fb_idx, frame_bufs, pool); |
| unlock_buffer_pool(pool); |
| |
| vpx_clear_system_state(); |
| return -1; |
| } |
| |
| cm->error.setjmp = 1; |
| vp10_decode_frame(pbi, source, source + size, psource); |
| |
| swap_frame_buffers(pbi); |
| |
| vpx_clear_system_state(); |
| |
| if (!cm->show_existing_frame) { |
| cm->last_show_frame = cm->show_frame; |
| cm->prev_frame = cm->cur_frame; |
| if (cm->seg.enabled && !cm->frame_parallel_decode) |
| vp10_swap_current_and_last_seg_map(cm); |
| } |
| |
| // Update progress in frame parallel decode. |
| if (cm->frame_parallel_decode) { |
| // Need to lock the mutex here as another thread may |
| // be accessing this buffer. |
| VPxWorker *const worker = pbi->frame_worker_owner; |
| FrameWorkerData *const frame_worker_data = worker->data1; |
| vp10_frameworker_lock_stats(worker); |
| |
| if (cm->show_frame) { |
| cm->current_video_frame++; |
| } |
| frame_worker_data->frame_decoded = 1; |
| frame_worker_data->frame_context_ready = 1; |
| vp10_frameworker_signal_stats(worker); |
| vp10_frameworker_unlock_stats(worker); |
| } else { |
| cm->last_width = cm->width; |
| cm->last_height = cm->height; |
| if (cm->show_frame) { |
| cm->current_video_frame++; |
| } |
| } |
| |
| cm->error.setjmp = 0; |
| return retcode; |
| } |
| |
| int vp10_get_raw_frame(VP10Decoder *pbi, YV12_BUFFER_CONFIG *sd, |
| vp10_ppflags_t *flags) { |
| VP10_COMMON *const cm = &pbi->common; |
| int ret = -1; |
| #if !CONFIG_VP9_POSTPROC |
| (void)*flags; |
| #endif |
| |
| if (pbi->ready_for_new_data == 1) |
| return ret; |
| |
| pbi->ready_for_new_data = 1; |
| |
| /* no raw frame to show!!! */ |
| if (!cm->show_frame) |
| return ret; |
| |
| pbi->ready_for_new_data = 1; |
| |
| #if CONFIG_VP9_POSTPROC |
| if (!cm->show_existing_frame) { |
| ret = vp10_post_proc_frame(cm, sd, flags); |
| } else { |
| *sd = *cm->frame_to_show; |
| ret = 0; |
| } |
| #else |
| *sd = *cm->frame_to_show; |
| ret = 0; |
| #endif /*!CONFIG_POSTPROC*/ |
| vpx_clear_system_state(); |
| return ret; |
| } |
| |
| vpx_codec_err_t vp10_parse_superframe_index(const uint8_t *data, |
| size_t data_sz, |
| uint32_t sizes[8], int *count, |
| vpx_decrypt_cb decrypt_cb, |
| void *decrypt_state) { |
| // A chunk ending with a byte matching 0xc0 is an invalid chunk unless |
| // it is a super frame index. If the last byte of real video compression |
| // data is 0xc0 the encoder must add a 0 byte. If we have the marker but |
| // not the associated matching marker byte at the front of the index we have |
| // an invalid bitstream and need to return an error. |
| |
| uint8_t marker; |
| #if CONFIG_MISC_FIXES |
| size_t frame_sz_sum = 0; |
| #endif |
| |
| assert(data_sz); |
| marker = read_marker(decrypt_cb, decrypt_state, data + data_sz - 1); |
| *count = 0; |
| |
| if ((marker & 0xe0) == 0xc0) { |
| const uint32_t frames = (marker & 0x7) + 1; |
| const uint32_t mag = ((marker >> 3) & 0x3) + 1; |
| const size_t index_sz = 2 + mag * (frames - CONFIG_MISC_FIXES); |
| |
| // This chunk is marked as having a superframe index but doesn't have |
| // enough data for it, thus it's an invalid superframe index. |
| if (data_sz < index_sz) |
| return VPX_CODEC_CORRUPT_FRAME; |
| |
| { |
| const uint8_t marker2 = read_marker(decrypt_cb, decrypt_state, |
| data + data_sz - index_sz); |
| |
| // This chunk is marked as having a superframe index but doesn't have |
| // the matching marker byte at the front of the index therefore it's an |
| // invalid chunk. |
| if (marker != marker2) |
| return VPX_CODEC_CORRUPT_FRAME; |
| } |
| |
| { |
| // Found a valid superframe index. |
| uint32_t i, j; |
| const uint8_t *x = &data[data_sz - index_sz + 1]; |
| |
| // Frames has a maximum of 8 and mag has a maximum of 4. |
| uint8_t clear_buffer[32]; |
| assert(sizeof(clear_buffer) >= frames * mag); |
| if (decrypt_cb) { |
| decrypt_cb(decrypt_state, x, clear_buffer, frames * mag); |
| x = clear_buffer; |
| } |
| |
| for (i = 0; i < frames - CONFIG_MISC_FIXES; ++i) { |
| uint32_t this_sz = 0; |
| |
| for (j = 0; j < mag; ++j) |
| this_sz |= (*x++) << (j * 8); |
| this_sz += CONFIG_MISC_FIXES; |
| sizes[i] = this_sz; |
| #if CONFIG_MISC_FIXES |
| frame_sz_sum += this_sz; |
| #endif |
| } |
| #if CONFIG_MISC_FIXES |
| sizes[i] = data_sz - index_sz - frame_sz_sum; |
| #endif |
| *count = frames; |
| } |
| } |
| return VPX_CODEC_OK; |
| } |