| /* |
| * Copyright (c) 2013 The WebM project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <math.h> |
| |
| #include "vpx_ports/mem.h" |
| |
| #include "vp10/encoder/aq_variance.h" |
| |
| #include "vp10/common/seg_common.h" |
| #include "vp10/encoder/ratectrl.h" |
| #include "vp10/encoder/rd.h" |
| #include "vp10/encoder/segmentation.h" |
| #include "vpx_ports/system_state.h" |
| |
| #define ENERGY_MIN (-4) |
| #define ENERGY_MAX (1) |
| #define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1) |
| #define ENERGY_IN_BOUNDS(energy)\ |
| assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX) |
| |
| static const double rate_ratio[MAX_SEGMENTS] = |
| {2.5, 2.0, 1.5, 1.0, 0.75, 1.0, 1.0, 1.0}; |
| static const int segment_id[ENERGY_SPAN] = {0, 1, 1, 2, 3, 4}; |
| |
| #define SEGMENT_ID(i) segment_id[(i) - ENERGY_MIN] |
| |
| DECLARE_ALIGNED(16, static const uint8_t, vp10_64_zeros[64]) = {0}; |
| #if CONFIG_VP9_HIGHBITDEPTH |
| DECLARE_ALIGNED(16, static const uint16_t, vp10_highbd_64_zeros[64]) = {0}; |
| #endif |
| |
| unsigned int vp10_vaq_segment_id(int energy) { |
| ENERGY_IN_BOUNDS(energy); |
| return SEGMENT_ID(energy); |
| } |
| |
| void vp10_vaq_frame_setup(VP10_COMP *cpi) { |
| VP10_COMMON *cm = &cpi->common; |
| struct segmentation *seg = &cm->seg; |
| int i; |
| |
| if (frame_is_intra_only(cm) || cm->error_resilient_mode || |
| cpi->refresh_alt_ref_frame || |
| (cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) { |
| vp10_enable_segmentation(seg); |
| vp10_clearall_segfeatures(seg); |
| |
| seg->abs_delta = SEGMENT_DELTADATA; |
| |
| vpx_clear_system_state(); |
| |
| for (i = 0; i < MAX_SEGMENTS; ++i) { |
| int qindex_delta = |
| vp10_compute_qdelta_by_rate(&cpi->rc, cm->frame_type, cm->base_qindex, |
| rate_ratio[i], cm->bit_depth); |
| |
| // We don't allow qindex 0 in a segment if the base value is not 0. |
| // Q index 0 (lossless) implies 4x4 encoding only and in AQ mode a segment |
| // Q delta is sometimes applied without going back around the rd loop. |
| // This could lead to an illegal combination of partition size and q. |
| if ((cm->base_qindex != 0) && ((cm->base_qindex + qindex_delta) == 0)) { |
| qindex_delta = -cm->base_qindex + 1; |
| } |
| |
| // No need to enable SEG_LVL_ALT_Q for this segment. |
| if (rate_ratio[i] == 1.0) { |
| continue; |
| } |
| |
| vp10_set_segdata(seg, i, SEG_LVL_ALT_Q, qindex_delta); |
| vp10_enable_segfeature(seg, i, SEG_LVL_ALT_Q); |
| } |
| } |
| } |
| |
| /* TODO(agrange, paulwilkins): The block_variance calls the unoptimized versions |
| * of variance() and highbd_8_variance(). It should not. |
| */ |
| static void aq_variance(const uint8_t *a, int a_stride, |
| const uint8_t *b, int b_stride, |
| int w, int h, unsigned int *sse, int *sum) { |
| int i, j; |
| |
| *sum = 0; |
| *sse = 0; |
| |
| for (i = 0; i < h; i++) { |
| for (j = 0; j < w; j++) { |
| const int diff = a[j] - b[j]; |
| *sum += diff; |
| *sse += diff * diff; |
| } |
| |
| a += a_stride; |
| b += b_stride; |
| } |
| } |
| |
| #if CONFIG_VP9_HIGHBITDEPTH |
| static void aq_highbd_variance64(const uint8_t *a8, int a_stride, |
| const uint8_t *b8, int b_stride, |
| int w, int h, uint64_t *sse, uint64_t *sum) { |
| int i, j; |
| |
| uint16_t *a = CONVERT_TO_SHORTPTR(a8); |
| uint16_t *b = CONVERT_TO_SHORTPTR(b8); |
| *sum = 0; |
| *sse = 0; |
| |
| for (i = 0; i < h; i++) { |
| for (j = 0; j < w; j++) { |
| const int diff = a[j] - b[j]; |
| *sum += diff; |
| *sse += diff * diff; |
| } |
| a += a_stride; |
| b += b_stride; |
| } |
| } |
| |
| static void aq_highbd_8_variance(const uint8_t *a8, int a_stride, |
| const uint8_t *b8, int b_stride, |
| int w, int h, unsigned int *sse, int *sum) { |
| uint64_t sse_long = 0; |
| uint64_t sum_long = 0; |
| aq_highbd_variance64(a8, a_stride, b8, b_stride, w, h, &sse_long, &sum_long); |
| *sse = (unsigned int)sse_long; |
| *sum = (int)sum_long; |
| } |
| #endif // CONFIG_VP9_HIGHBITDEPTH |
| |
| static unsigned int block_variance(VP10_COMP *cpi, MACROBLOCK *x, |
| BLOCK_SIZE bs) { |
| MACROBLOCKD *xd = &x->e_mbd; |
| unsigned int var, sse; |
| int right_overflow = (xd->mb_to_right_edge < 0) ? |
| ((-xd->mb_to_right_edge) >> 3) : 0; |
| int bottom_overflow = (xd->mb_to_bottom_edge < 0) ? |
| ((-xd->mb_to_bottom_edge) >> 3) : 0; |
| |
| if (right_overflow || bottom_overflow) { |
| const int bw = 8 * num_8x8_blocks_wide_lookup[bs] - right_overflow; |
| const int bh = 8 * num_8x8_blocks_high_lookup[bs] - bottom_overflow; |
| int avg; |
| #if CONFIG_VP9_HIGHBITDEPTH |
| if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) { |
| aq_highbd_8_variance(x->plane[0].src.buf, x->plane[0].src.stride, |
| CONVERT_TO_BYTEPTR(vp10_highbd_64_zeros), 0, bw, bh, |
| &sse, &avg); |
| sse >>= 2 * (xd->bd - 8); |
| avg >>= (xd->bd - 8); |
| } else { |
| aq_variance(x->plane[0].src.buf, x->plane[0].src.stride, |
| vp10_64_zeros, 0, bw, bh, &sse, &avg); |
| } |
| #else |
| aq_variance(x->plane[0].src.buf, x->plane[0].src.stride, |
| vp10_64_zeros, 0, bw, bh, &sse, &avg); |
| #endif // CONFIG_VP9_HIGHBITDEPTH |
| var = sse - (((int64_t)avg * avg) / (bw * bh)); |
| return (256 * var) / (bw * bh); |
| } else { |
| #if CONFIG_VP9_HIGHBITDEPTH |
| if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) { |
| var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf, |
| x->plane[0].src.stride, |
| CONVERT_TO_BYTEPTR(vp10_highbd_64_zeros), |
| 0, &sse); |
| } else { |
| var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf, |
| x->plane[0].src.stride, |
| vp10_64_zeros, 0, &sse); |
| } |
| #else |
| var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf, |
| x->plane[0].src.stride, |
| vp10_64_zeros, 0, &sse); |
| #endif // CONFIG_VP9_HIGHBITDEPTH |
| return (256 * var) >> num_pels_log2_lookup[bs]; |
| } |
| } |
| |
| double vp10_log_block_var(VP10_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { |
| unsigned int var = block_variance(cpi, x, bs); |
| vpx_clear_system_state(); |
| return log(var + 1.0); |
| } |
| |
| #define DEFAULT_E_MIDPOINT 10.0 |
| int vp10_block_energy(VP10_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { |
| double energy; |
| double energy_midpoint; |
| vpx_clear_system_state(); |
| energy_midpoint = |
| (cpi->oxcf.pass == 2) ? cpi->twopass.mb_av_energy : DEFAULT_E_MIDPOINT; |
| energy = vp10_log_block_var(cpi, x, bs) - energy_midpoint; |
| return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX); |
| } |