| /* |
| * Copyright (c) 2013 The WebM project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| #include <math.h> |
| |
| #include "vpx_ports/mem.h" |
| #include "vpx_ports/system_state.h" |
| |
| #include "vp9/encoder/vp9_aq_variance.h" |
| |
| #include "vp9/common/vp9_seg_common.h" |
| |
| #include "vp9/encoder/vp9_ratectrl.h" |
| #include "vp9/encoder/vp9_rd.h" |
| #include "vp9/encoder/vp9_encodeframe.h" |
| #include "vp9/encoder/vp9_segmentation.h" |
| |
| #define ENERGY_MIN (-4) |
| #define ENERGY_MAX (1) |
| #define ENERGY_SPAN (ENERGY_MAX - ENERGY_MIN + 1) |
| #define ENERGY_IN_BOUNDS(energy) \ |
| assert((energy) >= ENERGY_MIN && (energy) <= ENERGY_MAX) |
| |
| static const double rate_ratio[MAX_SEGMENTS] = { 2.5, 2.0, 1.5, 1.0, |
| 0.75, 1.0, 1.0, 1.0 }; |
| static const int segment_id[ENERGY_SPAN] = { 0, 1, 1, 2, 3, 4 }; |
| |
| #define SEGMENT_ID(i) segment_id[(i)-ENERGY_MIN] |
| |
| DECLARE_ALIGNED(16, static const uint8_t, vp9_64_zeros[64]) = { 0 }; |
| #if CONFIG_VP9_HIGHBITDEPTH |
| DECLARE_ALIGNED(16, static const uint16_t, vp9_highbd_64_zeros[64]) = { 0 }; |
| #endif |
| |
| unsigned int vp9_vaq_segment_id(int energy) { |
| ENERGY_IN_BOUNDS(energy); |
| return SEGMENT_ID(energy); |
| } |
| |
| void vp9_vaq_frame_setup(VP9_COMP *cpi) { |
| VP9_COMMON *cm = &cpi->common; |
| struct segmentation *seg = &cm->seg; |
| int i; |
| |
| if (frame_is_intra_only(cm) || cm->error_resilient_mode || |
| cpi->refresh_alt_ref_frame || cpi->force_update_segmentation || |
| (cpi->refresh_golden_frame && !cpi->rc.is_src_frame_alt_ref)) { |
| vp9_enable_segmentation(seg); |
| vp9_clearall_segfeatures(seg); |
| |
| seg->abs_delta = SEGMENT_DELTADATA; |
| |
| vpx_clear_system_state(); |
| |
| for (i = 0; i < MAX_SEGMENTS; ++i) { |
| int qindex_delta = |
| vp9_compute_qdelta_by_rate(&cpi->rc, cm->frame_type, cm->base_qindex, |
| rate_ratio[i], cm->bit_depth); |
| |
| // We don't allow qindex 0 in a segment if the base value is not 0. |
| // Q index 0 (lossless) implies 4x4 encoding only and in AQ mode a segment |
| // Q delta is sometimes applied without going back around the rd loop. |
| // This could lead to an illegal combination of partition size and q. |
| if ((cm->base_qindex != 0) && ((cm->base_qindex + qindex_delta) == 0)) { |
| qindex_delta = -cm->base_qindex + 1; |
| } |
| |
| // No need to enable SEG_LVL_ALT_Q for this segment. |
| if (rate_ratio[i] == 1.0) { |
| continue; |
| } |
| |
| vp9_set_segdata(seg, i, SEG_LVL_ALT_Q, qindex_delta); |
| vp9_enable_segfeature(seg, i, SEG_LVL_ALT_Q); |
| } |
| } |
| } |
| |
| /* TODO(agrange, paulwilkins): The block_variance calls the unoptimized versions |
| * of variance() and highbd_8_variance(). It should not. |
| */ |
| static void aq_variance(const uint8_t *a, int a_stride, const uint8_t *b, |
| int b_stride, int w, int h, unsigned int *sse, |
| int *sum) { |
| int i, j; |
| |
| *sum = 0; |
| *sse = 0; |
| |
| for (i = 0; i < h; i++) { |
| for (j = 0; j < w; j++) { |
| const int diff = a[j] - b[j]; |
| *sum += diff; |
| *sse += diff * diff; |
| } |
| |
| a += a_stride; |
| b += b_stride; |
| } |
| } |
| |
| #if CONFIG_VP9_HIGHBITDEPTH |
| static void aq_highbd_variance64(const uint8_t *a8, int a_stride, |
| const uint8_t *b8, int b_stride, int w, int h, |
| uint64_t *sse, int64_t *sum) { |
| int i, j; |
| |
| uint16_t *a = CONVERT_TO_SHORTPTR(a8); |
| uint16_t *b = CONVERT_TO_SHORTPTR(b8); |
| *sum = 0; |
| *sse = 0; |
| |
| for (i = 0; i < h; i++) { |
| for (j = 0; j < w; j++) { |
| const int diff = a[j] - b[j]; |
| *sum += diff; |
| *sse += diff * diff; |
| } |
| a += a_stride; |
| b += b_stride; |
| } |
| } |
| |
| #endif // CONFIG_VP9_HIGHBITDEPTH |
| |
| static unsigned int block_variance(VP9_COMP *cpi, MACROBLOCK *x, |
| BLOCK_SIZE bs) { |
| MACROBLOCKD *xd = &x->e_mbd; |
| unsigned int var, sse; |
| int right_overflow = |
| (xd->mb_to_right_edge < 0) ? ((-xd->mb_to_right_edge) >> 3) : 0; |
| int bottom_overflow = |
| (xd->mb_to_bottom_edge < 0) ? ((-xd->mb_to_bottom_edge) >> 3) : 0; |
| |
| if (right_overflow || bottom_overflow) { |
| const int bw = 8 * num_8x8_blocks_wide_lookup[bs] - right_overflow; |
| const int bh = 8 * num_8x8_blocks_high_lookup[bs] - bottom_overflow; |
| int avg; |
| #if CONFIG_VP9_HIGHBITDEPTH |
| if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) { |
| uint64_t sse64 = 0; |
| int64_t sum64 = 0; |
| aq_highbd_variance64(x->plane[0].src.buf, x->plane[0].src.stride, |
| CONVERT_TO_BYTEPTR(vp9_highbd_64_zeros), 0, bw, bh, |
| &sse64, &sum64); |
| sse = (unsigned int)(sse64 >> (2 * (xd->bd - 8))); |
| avg = (int)(sum64 >> (xd->bd - 8)); |
| } else { |
| aq_variance(x->plane[0].src.buf, x->plane[0].src.stride, vp9_64_zeros, 0, |
| bw, bh, &sse, &avg); |
| } |
| #else |
| aq_variance(x->plane[0].src.buf, x->plane[0].src.stride, vp9_64_zeros, 0, |
| bw, bh, &sse, &avg); |
| #endif // CONFIG_VP9_HIGHBITDEPTH |
| var = sse - (unsigned int)(((int64_t)avg * avg) / (bw * bh)); |
| return (unsigned int)(((uint64_t)256 * var) / (bw * bh)); |
| } else { |
| #if CONFIG_VP9_HIGHBITDEPTH |
| if (xd->cur_buf->flags & YV12_FLAG_HIGHBITDEPTH) { |
| var = |
| cpi->fn_ptr[bs].vf(x->plane[0].src.buf, x->plane[0].src.stride, |
| CONVERT_TO_BYTEPTR(vp9_highbd_64_zeros), 0, &sse); |
| } else { |
| var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf, x->plane[0].src.stride, |
| vp9_64_zeros, 0, &sse); |
| } |
| #else |
| var = cpi->fn_ptr[bs].vf(x->plane[0].src.buf, x->plane[0].src.stride, |
| vp9_64_zeros, 0, &sse); |
| #endif // CONFIG_VP9_HIGHBITDEPTH |
| return (unsigned int)(((uint64_t)256 * var) >> num_pels_log2_lookup[bs]); |
| } |
| } |
| |
| double vp9_log_block_var(VP9_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { |
| unsigned int var = block_variance(cpi, x, bs); |
| vpx_clear_system_state(); |
| return log(var + 1.0); |
| } |
| |
| #define DEFAULT_E_MIDPOINT 10.0 |
| static int scale_block_energy(VP9_COMP *cpi, unsigned int block_var) { |
| double energy; |
| double energy_midpoint; |
| energy_midpoint = |
| (cpi->oxcf.pass == 2) ? cpi->twopass.mb_av_energy : DEFAULT_E_MIDPOINT; |
| energy = log(block_var + 1.0) - energy_midpoint; |
| return clamp((int)round(energy), ENERGY_MIN, ENERGY_MAX); |
| } |
| #undef DEFAULT_E_MIDPOINT |
| |
| // Get the range of sub block energy values; |
| void vp9_get_sub_block_energy(VP9_COMP *cpi, MACROBLOCK *mb, int mi_row, |
| int mi_col, BLOCK_SIZE bsize, int *min_e, |
| int *max_e) { |
| VP9_COMMON *const cm = &cpi->common; |
| const int bw = num_8x8_blocks_wide_lookup[bsize]; |
| const int bh = num_8x8_blocks_high_lookup[bsize]; |
| const int xmis = VPXMIN(cm->mi_cols - mi_col, bw); |
| const int ymis = VPXMIN(cm->mi_rows - mi_row, bh); |
| int x, y; |
| |
| if (xmis < bw || ymis < bh) { |
| vp9_setup_src_planes(mb, cpi->Source, mi_row, mi_col); |
| *min_e = vp9_block_energy(cpi, mb, bsize); |
| *max_e = *min_e; |
| } else { |
| unsigned int var; |
| // Because scale_block_energy is non-decreasing, we can find the min/max |
| // block variance and scale afterwards. This avoids a costly scaling at |
| // every iteration. |
| unsigned int min_var = UINT_MAX; |
| unsigned int max_var = 0; |
| |
| for (y = 0; y < ymis; ++y) { |
| for (x = 0; x < xmis; ++x) { |
| vp9_setup_src_planes(mb, cpi->Source, mi_row + y, mi_col + x); |
| vpx_clear_system_state(); |
| var = block_variance(cpi, mb, BLOCK_8X8); |
| vpx_clear_system_state(); |
| min_var = VPXMIN(min_var, var); |
| max_var = VPXMAX(max_var, var); |
| } |
| } |
| *min_e = scale_block_energy(cpi, min_var); |
| *max_e = scale_block_energy(cpi, max_var); |
| } |
| |
| // Re-instate source pointers back to what they should have been on entry. |
| vp9_setup_src_planes(mb, cpi->Source, mi_row, mi_col); |
| } |
| |
| int vp9_block_energy(VP9_COMP *cpi, MACROBLOCK *x, BLOCK_SIZE bs) { |
| unsigned int var; |
| vpx_clear_system_state(); |
| var = block_variance(cpi, x, bs); |
| vpx_clear_system_state(); |
| return scale_block_energy(cpi, var); |
| } |