| /* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- |
| * vim: set ts=8 sts=4 et sw=4 tw=99: |
| * This Source Code Form is subject to the terms of the Mozilla Public |
| * License, v. 2.0. If a copy of the MPL was not distributed with this |
| * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ |
| |
| #include "jscompartment.h" |
| |
| #include "jit/Bailouts.h" |
| #include "jit/BaselineJIT.h" |
| #include "jit/JitCompartment.h" |
| #include "jit/JitFrames.h" |
| #include "jit/JitSpewer.h" |
| #include "jit/Linker.h" |
| #ifdef JS_ION_PERF |
| # include "jit/PerfSpewer.h" |
| #endif |
| #include "jit/VMFunctions.h" |
| #include "jit/x86/SharedICHelpers-x86.h" |
| |
| #include "jsscriptinlines.h" |
| |
| #include "jit/MacroAssembler-inl.h" |
| |
| using namespace js; |
| using namespace js::jit; |
| |
| // All registers to save and restore. This includes the stack pointer, since we |
| // use the ability to reference register values on the stack by index. |
| static const LiveRegisterSet AllRegs = |
| LiveRegisterSet(GeneralRegisterSet(Registers::AllMask), |
| FloatRegisterSet(FloatRegisters::AllMask)); |
| |
| enum EnterJitEbpArgumentOffset { |
| ARG_JITCODE = 2 * sizeof(void*), |
| ARG_ARGC = 3 * sizeof(void*), |
| ARG_ARGV = 4 * sizeof(void*), |
| ARG_STACKFRAME = 5 * sizeof(void*), |
| ARG_CALLEETOKEN = 6 * sizeof(void*), |
| ARG_SCOPECHAIN = 7 * sizeof(void*), |
| ARG_STACKVALUES = 8 * sizeof(void*), |
| ARG_RESULT = 9 * sizeof(void*) |
| }; |
| |
| |
| // Generates a trampoline for calling Jit compiled code from a C++ function. |
| // The trampoline use the EnterJitCode signature, with the standard cdecl |
| // calling convention. |
| JitCode* |
| JitRuntime::generateEnterJIT(JSContext* cx, EnterJitType type) |
| { |
| MacroAssembler masm(cx); |
| masm.assertStackAlignment(ABIStackAlignment, -int32_t(sizeof(uintptr_t)) /* return address */); |
| |
| // Save old stack frame pointer, set new stack frame pointer. |
| masm.push(ebp); |
| masm.movl(esp, ebp); |
| |
| // Save non-volatile registers. These must be saved by the trampoline, |
| // rather than the JIT'd code, because they are scanned by the conservative |
| // scanner. |
| masm.push(ebx); |
| masm.push(esi); |
| masm.push(edi); |
| |
| // Keep track of the stack which has to be unwound after returning from the |
| // compiled function. |
| masm.movl(esp, esi); |
| |
| // Load the number of values to be copied (argc) into eax |
| masm.loadPtr(Address(ebp, ARG_ARGC), eax); |
| |
| // If we are constructing, that also needs to include newTarget |
| { |
| Label noNewTarget; |
| masm.loadPtr(Address(ebp, ARG_CALLEETOKEN), edx); |
| masm.branchTest32(Assembler::Zero, edx, Imm32(CalleeToken_FunctionConstructing), |
| &noNewTarget); |
| |
| masm.addl(Imm32(1), eax); |
| |
| masm.bind(&noNewTarget); |
| } |
| |
| // eax <- 8*numValues, eax is now the offset betwen argv and the last value. |
| masm.shll(Imm32(3), eax); |
| |
| // Guarantee stack alignment of Jit frames. |
| // |
| // This code compensates for the offset created by the copy of the vector of |
| // arguments, such that the jit frame will be aligned once the return |
| // address is pushed on the stack. |
| // |
| // In the computation of the offset, we omit the size of the JitFrameLayout |
| // which is pushed on the stack, as the JitFrameLayout size is a multiple of |
| // the JitStackAlignment. |
| masm.movl(esp, ecx); |
| masm.subl(eax, ecx); |
| static_assert(sizeof(JitFrameLayout) % JitStackAlignment == 0, |
| "No need to consider the JitFrameLayout for aligning the stack"); |
| |
| // ecx = ecx & 15, holds alignment. |
| masm.andl(Imm32(JitStackAlignment - 1), ecx); |
| masm.subl(ecx, esp); |
| |
| /*************************************************************** |
| Loop over argv vector, push arguments onto stack in reverse order |
| ***************************************************************/ |
| |
| // ebx = argv --argv pointer is in ebp + 16 |
| masm.loadPtr(Address(ebp, ARG_ARGV), ebx); |
| |
| // eax = argv[8(argc)] --eax now points one value past the last argument |
| masm.addl(ebx, eax); |
| |
| // while (eax > ebx) --while still looping through arguments |
| { |
| Label header, footer; |
| masm.bind(&header); |
| |
| masm.cmp32(eax, ebx); |
| masm.j(Assembler::BelowOrEqual, &footer); |
| |
| // eax -= 8 --move to previous argument |
| masm.subl(Imm32(8), eax); |
| |
| // Push what eax points to on stack, a Value is 2 words |
| masm.push(Operand(eax, 4)); |
| masm.push(Operand(eax, 0)); |
| |
| masm.jmp(&header); |
| masm.bind(&footer); |
| } |
| |
| |
| // Push the number of actual arguments. |result| is used to store the |
| // actual number of arguments without adding an extra argument to the enter |
| // JIT. |
| masm.mov(Operand(ebp, ARG_RESULT), eax); |
| masm.unboxInt32(Address(eax, 0x0), eax); |
| masm.push(eax); |
| |
| // Push the callee token. |
| masm.push(Operand(ebp, ARG_CALLEETOKEN)); |
| |
| // Load the InterpreterFrame address into the OsrFrameReg. |
| // This address is also used for setting the constructing bit on all paths. |
| masm.loadPtr(Address(ebp, ARG_STACKFRAME), OsrFrameReg); |
| |
| /***************************************************************** |
| Push the number of bytes we've pushed so far on the stack and call |
| *****************************************************************/ |
| // Create a frame descriptor. |
| masm.subl(esp, esi); |
| masm.makeFrameDescriptor(esi, JitFrame_Entry); |
| masm.push(esi); |
| |
| CodeLabel returnLabel; |
| CodeLabel oomReturnLabel; |
| if (type == EnterJitBaseline) { |
| // Handle OSR. |
| AllocatableGeneralRegisterSet regs(GeneralRegisterSet::All()); |
| regs.take(JSReturnOperand); |
| regs.takeUnchecked(OsrFrameReg); |
| regs.take(ebp); |
| regs.take(ReturnReg); |
| |
| Register scratch = regs.takeAny(); |
| |
| Label notOsr; |
| masm.branchTestPtr(Assembler::Zero, OsrFrameReg, OsrFrameReg, ¬Osr); |
| |
| Register numStackValues = regs.takeAny(); |
| masm.loadPtr(Address(ebp, ARG_STACKVALUES), numStackValues); |
| |
| Register jitcode = regs.takeAny(); |
| masm.loadPtr(Address(ebp, ARG_JITCODE), jitcode); |
| |
| // Push return address. |
| masm.mov(returnLabel.patchAt(), scratch); |
| masm.push(scratch); |
| |
| // Push previous frame pointer. |
| masm.push(ebp); |
| |
| // Reserve frame. |
| Register framePtr = ebp; |
| masm.subPtr(Imm32(BaselineFrame::Size()), esp); |
| masm.mov(esp, framePtr); |
| |
| #ifdef XP_WIN |
| // Can't push large frames blindly on windows. Touch frame memory incrementally. |
| masm.mov(numStackValues, scratch); |
| masm.shll(Imm32(3), scratch); |
| masm.subPtr(scratch, framePtr); |
| { |
| masm.movePtr(esp, scratch); |
| masm.subPtr(Imm32(WINDOWS_BIG_FRAME_TOUCH_INCREMENT), scratch); |
| |
| Label touchFrameLoop; |
| Label touchFrameLoopEnd; |
| masm.bind(&touchFrameLoop); |
| masm.branchPtr(Assembler::Below, scratch, framePtr, &touchFrameLoopEnd); |
| masm.store32(Imm32(0), Address(scratch, 0)); |
| masm.subPtr(Imm32(WINDOWS_BIG_FRAME_TOUCH_INCREMENT), scratch); |
| masm.jump(&touchFrameLoop); |
| masm.bind(&touchFrameLoopEnd); |
| } |
| masm.mov(esp, framePtr); |
| #endif |
| |
| // Reserve space for locals and stack values. |
| masm.mov(numStackValues, scratch); |
| masm.shll(Imm32(3), scratch); |
| masm.subPtr(scratch, esp); |
| |
| // Enter exit frame. |
| masm.addPtr(Imm32(BaselineFrame::Size() + BaselineFrame::FramePointerOffset), scratch); |
| masm.makeFrameDescriptor(scratch, JitFrame_BaselineJS); |
| masm.push(scratch); // Fake return address. |
| masm.push(Imm32(0)); |
| // No GC things to mark on the stack, push a bare token. |
| masm.enterFakeExitFrame(ExitFrameLayoutBareToken); |
| |
| masm.push(framePtr); |
| masm.push(jitcode); |
| |
| masm.setupUnalignedABICall(scratch); |
| masm.passABIArg(framePtr); // BaselineFrame |
| masm.passABIArg(OsrFrameReg); // InterpreterFrame |
| masm.passABIArg(numStackValues); |
| masm.callWithABI(JS_FUNC_TO_DATA_PTR(void*, jit::InitBaselineFrameForOsr)); |
| |
| masm.pop(jitcode); |
| masm.pop(framePtr); |
| |
| MOZ_ASSERT(jitcode != ReturnReg); |
| |
| Label error; |
| masm.addPtr(Imm32(ExitFrameLayout::SizeWithFooter()), esp); |
| masm.addPtr(Imm32(BaselineFrame::Size()), framePtr); |
| masm.branchIfFalseBool(ReturnReg, &error); |
| |
| // If OSR-ing, then emit instrumentation for setting lastProfilerFrame |
| // if profiler instrumentation is enabled. |
| { |
| Label skipProfilingInstrumentation; |
| Register realFramePtr = numStackValues; |
| AbsoluteAddress addressOfEnabled(cx->runtime()->spsProfiler.addressOfEnabled()); |
| masm.branch32(Assembler::Equal, addressOfEnabled, Imm32(0), |
| &skipProfilingInstrumentation); |
| masm.lea(Operand(framePtr, sizeof(void*)), realFramePtr); |
| masm.profilerEnterFrame(realFramePtr, scratch); |
| masm.bind(&skipProfilingInstrumentation); |
| } |
| |
| masm.jump(jitcode); |
| |
| // OOM: load error value, discard return address and previous frame |
| // pointer and return. |
| masm.bind(&error); |
| masm.mov(framePtr, esp); |
| masm.addPtr(Imm32(2 * sizeof(uintptr_t)), esp); |
| masm.moveValue(MagicValue(JS_ION_ERROR), JSReturnOperand); |
| masm.mov(oomReturnLabel.patchAt(), scratch); |
| masm.jump(scratch); |
| |
| masm.bind(¬Osr); |
| masm.loadPtr(Address(ebp, ARG_SCOPECHAIN), R1.scratchReg()); |
| } |
| |
| // The call will push the return address on the stack, thus we check that |
| // the stack would be aligned once the call is complete. |
| masm.assertStackAlignment(JitStackAlignment, sizeof(uintptr_t)); |
| |
| /*************************************************************** |
| Call passed-in code, get return value and fill in the |
| passed in return value pointer |
| ***************************************************************/ |
| masm.call(Address(ebp, ARG_JITCODE)); |
| |
| if (type == EnterJitBaseline) { |
| // Baseline OSR will return here. |
| masm.use(returnLabel.target()); |
| masm.addCodeLabel(returnLabel); |
| masm.use(oomReturnLabel.target()); |
| masm.addCodeLabel(oomReturnLabel); |
| } |
| |
| // Pop arguments off the stack. |
| // eax <- 8*argc (size of all arguments we pushed on the stack) |
| masm.pop(eax); |
| masm.shrl(Imm32(FRAMESIZE_SHIFT), eax); // Unmark EntryFrame. |
| masm.addl(eax, esp); |
| |
| // |ebp| could have been clobbered by the inner function. |
| // Grab the address for the Value result from the argument stack. |
| // +20 ... arguments ... |
| // +16 <return> |
| // +12 ebp <- original %ebp pointing here. |
| // +8 ebx |
| // +4 esi |
| // +0 edi |
| masm.loadPtr(Address(esp, ARG_RESULT + 3 * sizeof(void*)), eax); |
| masm.storeValue(JSReturnOperand, Operand(eax, 0)); |
| |
| /************************************************************** |
| Return stack and registers to correct state |
| **************************************************************/ |
| |
| // Restore non-volatile registers |
| masm.pop(edi); |
| masm.pop(esi); |
| masm.pop(ebx); |
| |
| // Restore old stack frame pointer |
| masm.pop(ebp); |
| masm.ret(); |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "EnterJIT"); |
| #endif |
| |
| return code; |
| } |
| |
| JitCode* |
| JitRuntime::generateInvalidator(JSContext* cx) |
| { |
| AutoJitContextAlloc ajca(cx); |
| MacroAssembler masm(cx); |
| |
| // We do the minimum amount of work in assembly and shunt the rest |
| // off to InvalidationBailout. Assembly does: |
| // |
| // - Pop the return address from the invalidation epilogue call. |
| // - Push the machine state onto the stack. |
| // - Call the InvalidationBailout routine with the stack pointer. |
| // - Now that the frame has been bailed out, convert the invalidated |
| // frame into an exit frame. |
| // - Do the normal check-return-code-and-thunk-to-the-interpreter dance. |
| |
| masm.addl(Imm32(sizeof(uintptr_t)), esp); |
| |
| // Push registers such that we can access them from [base + code]. |
| masm.PushRegsInMask(AllRegs); |
| |
| masm.movl(esp, eax); // Argument to jit::InvalidationBailout. |
| |
| // Make space for InvalidationBailout's frameSize outparam. |
| masm.reserveStack(sizeof(size_t)); |
| masm.movl(esp, ebx); |
| |
| // Make space for InvalidationBailout's bailoutInfo outparam. |
| masm.reserveStack(sizeof(void*)); |
| masm.movl(esp, ecx); |
| |
| masm.setupUnalignedABICall(edx); |
| masm.passABIArg(eax); |
| masm.passABIArg(ebx); |
| masm.passABIArg(ecx); |
| masm.callWithABI(JS_FUNC_TO_DATA_PTR(void*, InvalidationBailout)); |
| |
| masm.pop(ecx); // Get bailoutInfo outparam. |
| masm.pop(ebx); // Get the frameSize outparam. |
| |
| // Pop the machine state and the dead frame. |
| masm.lea(Operand(esp, ebx, TimesOne, sizeof(InvalidationBailoutStack)), esp); |
| |
| // Jump to shared bailout tail. The BailoutInfo pointer has to be in ecx. |
| JitCode* bailoutTail = cx->runtime()->jitRuntime()->getBailoutTail(); |
| masm.jmp(bailoutTail); |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| JitSpew(JitSpew_IonInvalidate, " invalidation thunk created at %p", (void*) code->raw()); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "Invalidator"); |
| #endif |
| |
| return code; |
| } |
| |
| JitCode* |
| JitRuntime::generateArgumentsRectifier(JSContext* cx, void** returnAddrOut) |
| { |
| MacroAssembler masm(cx); |
| // Caller: |
| // [arg2] [arg1] [this] [[argc] [callee] [descr] [raddr]] <- esp |
| // '-- #esi ---' |
| |
| // ArgumentsRectifierReg contains the |nargs| pushed onto the current frame. |
| // Including |this|, there are (|nargs| + 1) arguments to copy. |
| MOZ_ASSERT(ArgumentsRectifierReg == esi); |
| |
| // Load the number of |undefined|s to push into %ecx. |
| masm.loadPtr(Address(esp, RectifierFrameLayout::offsetOfCalleeToken()), eax); |
| masm.mov(eax, ecx); |
| masm.andl(Imm32(CalleeTokenMask), ecx); |
| masm.movzwl(Operand(ecx, JSFunction::offsetOfNargs()), ecx); |
| |
| // The frame pointer and its padding are pushed on the stack. |
| // Including |this|, there are (|nformals| + 1) arguments to push to the |
| // stack. Then we push a JitFrameLayout. We compute the padding expressed |
| // in the number of extra |undefined| values to push on the stack. |
| static_assert(sizeof(JitFrameLayout) % JitStackAlignment == 0, |
| "No need to consider the JitFrameLayout for aligning the stack"); |
| static_assert((sizeof(Value) + 2 * sizeof(void*)) % JitStackAlignment == 0, |
| "No need to consider |this| and the frame pointer and its padding for aligning the stack"); |
| static_assert(JitStackAlignment % sizeof(Value) == 0, |
| "Ensure that we can pad the stack by pushing extra UndefinedValue"); |
| |
| MOZ_ASSERT(IsPowerOfTwo(JitStackValueAlignment)); |
| masm.addl(Imm32(JitStackValueAlignment - 1 /* for padding */), ecx); |
| |
| // Account for newTarget, if necessary. |
| static_assert(CalleeToken_FunctionConstructing == 1, |
| "Ensure that we can use the constructing bit to count an extra push"); |
| masm.mov(eax, edx); |
| masm.andl(Imm32(CalleeToken_FunctionConstructing), edx); |
| masm.addl(edx, ecx); |
| |
| masm.andl(Imm32(~(JitStackValueAlignment - 1)), ecx); |
| masm.subl(esi, ecx); |
| |
| // Copy the number of actual arguments. |
| masm.loadPtr(Address(esp, RectifierFrameLayout::offsetOfNumActualArgs()), edx); |
| |
| masm.moveValue(UndefinedValue(), ebx, edi); |
| |
| // NOTE: The fact that x86 ArgumentsRectifier saves the FramePointer is relied upon |
| // by the baseline bailout code. If this changes, fix that code! See |
| // BaselineJIT.cpp/BaselineStackBuilder::calculatePrevFramePtr, and |
| // BaselineJIT.cpp/InitFromBailout. Check for the |#if defined(JS_CODEGEN_X86)| portions. |
| masm.push(FramePointer); |
| masm.movl(esp, FramePointer); // Save %esp. |
| masm.push(FramePointer /* padding */); |
| |
| // Caller: |
| // [arg2] [arg1] [this] [[argc] [callee] [descr] [raddr]] |
| // '-- #esi ---' |
| // |
| // Rectifier frame: |
| // [ebp'] <- ebp [padding] <- esp [undef] [undef] [arg2] [arg1] [this] |
| // '--- #ecx ----' '-- #esi ---' |
| // |
| // [[argc] [callee] [descr] [raddr]] |
| |
| // Push undefined. |
| { |
| Label undefLoopTop; |
| masm.bind(&undefLoopTop); |
| |
| masm.push(ebx); // type(undefined); |
| masm.push(edi); // payload(undefined); |
| masm.subl(Imm32(1), ecx); |
| masm.j(Assembler::NonZero, &undefLoopTop); |
| } |
| |
| // Get the topmost argument. We did a push of %ebp earlier, so be sure to |
| // account for this in the offset |
| BaseIndex b = BaseIndex(FramePointer, esi, TimesEight, |
| sizeof(RectifierFrameLayout) + sizeof(void*)); |
| masm.lea(Operand(b), ecx); |
| |
| // Push arguments, |nargs| + 1 times (to include |this|). |
| masm.addl(Imm32(1), esi); |
| { |
| Label copyLoopTop; |
| |
| masm.bind(©LoopTop); |
| masm.push(Operand(ecx, sizeof(Value)/2)); |
| masm.push(Operand(ecx, 0x0)); |
| masm.subl(Imm32(sizeof(Value)), ecx); |
| masm.subl(Imm32(1), esi); |
| masm.j(Assembler::NonZero, ©LoopTop); |
| } |
| |
| { |
| Label notConstructing; |
| |
| masm.mov(eax, ebx); |
| masm.branchTest32(Assembler::Zero, ebx, Imm32(CalleeToken_FunctionConstructing), |
| ¬Constructing); |
| |
| BaseValueIndex src(FramePointer, edx, |
| sizeof(RectifierFrameLayout) + |
| sizeof(Value) + |
| sizeof(void*)); |
| |
| masm.andl(Imm32(CalleeTokenMask), ebx); |
| masm.movzwl(Operand(ebx, JSFunction::offsetOfNargs()), ebx); |
| |
| BaseValueIndex dst(esp, ebx, sizeof(Value)); |
| |
| ValueOperand newTarget(ecx, edi); |
| |
| masm.loadValue(src, newTarget); |
| masm.storeValue(newTarget, dst); |
| |
| masm.bind(¬Constructing); |
| } |
| |
| // Construct descriptor, accounting for pushed frame pointer above |
| masm.lea(Operand(FramePointer, sizeof(void*)), ebx); |
| masm.subl(esp, ebx); |
| masm.makeFrameDescriptor(ebx, JitFrame_Rectifier); |
| |
| // Construct JitFrameLayout. |
| masm.push(edx); // number of actual arguments |
| masm.push(eax); // callee token |
| masm.push(ebx); // descriptor |
| |
| // Call the target function. |
| // Note that this assumes the function is JITted. |
| masm.andl(Imm32(CalleeTokenMask), eax); |
| masm.loadPtr(Address(eax, JSFunction::offsetOfNativeOrScript()), eax); |
| masm.loadBaselineOrIonRaw(eax, eax, nullptr); |
| uint32_t returnOffset = masm.callJitNoProfiler(eax); |
| |
| // Remove the rectifier frame. |
| masm.pop(ebx); // ebx <- descriptor with FrameType. |
| masm.shrl(Imm32(FRAMESIZE_SHIFT), ebx); // ebx <- descriptor. |
| masm.pop(edi); // Discard calleeToken. |
| masm.pop(edi); // Discard number of actual arguments. |
| |
| // Discard pushed arguments, but not the pushed frame pointer. |
| BaseIndex unwind = BaseIndex(esp, ebx, TimesOne, -int32_t(sizeof(void*))); |
| masm.lea(Operand(unwind), esp); |
| |
| masm.pop(FramePointer); |
| masm.ret(); |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "ArgumentsRectifier"); |
| #endif |
| |
| if (returnAddrOut) |
| *returnAddrOut = (void*) (code->raw() + returnOffset); |
| return code; |
| } |
| |
| static void |
| PushBailoutFrame(MacroAssembler& masm, uint32_t frameClass, Register spArg) |
| { |
| // Push registers such that we can access them from [base + code]. |
| if (JitSupportsSimd()) { |
| masm.PushRegsInMask(AllRegs); |
| } else { |
| // When SIMD isn't supported, PushRegsInMask reduces the set of float |
| // registers to be double-sized, while the RegisterDump expects each of |
| // the float registers to have the maximal possible size |
| // (Simd128DataSize). To work around this, we just spill the double |
| // registers by hand here, using the register dump offset directly. |
| for (GeneralRegisterBackwardIterator iter(AllRegs.gprs()); iter.more(); iter++) |
| masm.Push(*iter); |
| |
| masm.reserveStack(sizeof(RegisterDump::FPUArray)); |
| for (FloatRegisterBackwardIterator iter(AllRegs.fpus()); iter.more(); iter++) { |
| FloatRegister reg = *iter; |
| Address spillAddress(StackPointer, reg.getRegisterDumpOffsetInBytes()); |
| masm.storeDouble(reg, spillAddress); |
| } |
| } |
| |
| // Push the bailout table number. |
| masm.push(Imm32(frameClass)); |
| |
| // The current stack pointer is the first argument to jit::Bailout. |
| masm.movl(esp, spArg); |
| } |
| |
| static void |
| GenerateBailoutThunk(JSContext* cx, MacroAssembler& masm, uint32_t frameClass) |
| { |
| PushBailoutFrame(masm, frameClass, eax); |
| |
| // Make space for Bailout's baioutInfo outparam. |
| masm.reserveStack(sizeof(void*)); |
| masm.movl(esp, ebx); |
| |
| // Call the bailout function. This will correct the size of the bailout. |
| masm.setupUnalignedABICall(ecx); |
| masm.passABIArg(eax); |
| masm.passABIArg(ebx); |
| masm.callWithABI(JS_FUNC_TO_DATA_PTR(void*, Bailout)); |
| |
| masm.pop(ecx); // Get bailoutInfo outparam. |
| |
| // Common size of stuff we've pushed. |
| static const uint32_t BailoutDataSize = 0 |
| + sizeof(void*) // frameClass |
| + sizeof(RegisterDump); |
| |
| // Remove both the bailout frame and the topmost Ion frame's stack. |
| if (frameClass == NO_FRAME_SIZE_CLASS_ID) { |
| // We want the frameSize. Stack is: |
| // ... frame ... |
| // snapshotOffset |
| // frameSize |
| // ... bailoutFrame ... |
| masm.addl(Imm32(BailoutDataSize), esp); |
| masm.pop(ebx); |
| masm.addl(Imm32(sizeof(uint32_t)), esp); |
| masm.addl(ebx, esp); |
| } else { |
| // Stack is: |
| // ... frame ... |
| // bailoutId |
| // ... bailoutFrame ... |
| uint32_t frameSize = FrameSizeClass::FromClass(frameClass).frameSize(); |
| masm.addl(Imm32(BailoutDataSize + sizeof(void*) + frameSize), esp); |
| } |
| |
| // Jump to shared bailout tail. The BailoutInfo pointer has to be in ecx. |
| JitCode* bailoutTail = cx->runtime()->jitRuntime()->getBailoutTail(); |
| masm.jmp(bailoutTail); |
| } |
| |
| JitCode* |
| JitRuntime::generateBailoutTable(JSContext* cx, uint32_t frameClass) |
| { |
| MacroAssembler masm; |
| |
| Label bailout; |
| for (size_t i = 0; i < BAILOUT_TABLE_SIZE; i++) |
| masm.call(&bailout); |
| masm.bind(&bailout); |
| |
| GenerateBailoutThunk(cx, masm, frameClass); |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "BailoutHandler"); |
| #endif |
| |
| return code; |
| } |
| |
| JitCode* |
| JitRuntime::generateBailoutHandler(JSContext* cx) |
| { |
| MacroAssembler masm; |
| GenerateBailoutThunk(cx, masm, NO_FRAME_SIZE_CLASS_ID); |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "BailoutHandler"); |
| #endif |
| |
| return code; |
| } |
| |
| JitCode* |
| JitRuntime::generateVMWrapper(JSContext* cx, const VMFunction& f) |
| { |
| MOZ_ASSERT(functionWrappers_); |
| MOZ_ASSERT(functionWrappers_->initialized()); |
| VMWrapperMap::AddPtr p = functionWrappers_->lookupForAdd(&f); |
| if (p) |
| return p->value(); |
| |
| // Generate a separated code for the wrapper. |
| MacroAssembler masm; |
| |
| // Avoid conflicts with argument registers while discarding the result after |
| // the function call. |
| AllocatableGeneralRegisterSet regs(Register::Codes::WrapperMask); |
| |
| // Wrapper register set is a superset of Volatile register set. |
| JS_STATIC_ASSERT((Register::Codes::VolatileMask & ~Register::Codes::WrapperMask) == 0); |
| |
| // The context is the first argument. |
| Register cxreg = regs.takeAny(); |
| |
| // Stack is: |
| // ... frame ... |
| // +8 [args] |
| // +4 descriptor |
| // +0 returnAddress |
| // |
| // We're aligned to an exit frame, so link it up. |
| masm.enterExitFrame(&f); |
| masm.loadJSContext(cxreg); |
| |
| // Save the current stack pointer as the base for copying arguments. |
| Register argsBase = InvalidReg; |
| if (f.explicitArgs) { |
| argsBase = regs.takeAny(); |
| masm.lea(Operand(esp, ExitFrameLayout::SizeWithFooter()), argsBase); |
| } |
| |
| // Reserve space for the outparameter. |
| Register outReg = InvalidReg; |
| switch (f.outParam) { |
| case Type_Value: |
| outReg = regs.takeAny(); |
| masm.Push(UndefinedValue()); |
| masm.movl(esp, outReg); |
| break; |
| |
| case Type_Handle: |
| outReg = regs.takeAny(); |
| masm.PushEmptyRooted(f.outParamRootType); |
| masm.movl(esp, outReg); |
| break; |
| |
| case Type_Int32: |
| case Type_Pointer: |
| case Type_Bool: |
| outReg = regs.takeAny(); |
| masm.reserveStack(sizeof(int32_t)); |
| masm.movl(esp, outReg); |
| break; |
| |
| case Type_Double: |
| outReg = regs.takeAny(); |
| masm.reserveStack(sizeof(double)); |
| masm.movl(esp, outReg); |
| break; |
| |
| default: |
| MOZ_ASSERT(f.outParam == Type_Void); |
| break; |
| } |
| |
| masm.setupUnalignedABICall(regs.getAny()); |
| masm.passABIArg(cxreg); |
| |
| size_t argDisp = 0; |
| |
| // Copy arguments. |
| for (uint32_t explicitArg = 0; explicitArg < f.explicitArgs; explicitArg++) { |
| MoveOperand from; |
| switch (f.argProperties(explicitArg)) { |
| case VMFunction::WordByValue: |
| masm.passABIArg(MoveOperand(argsBase, argDisp), MoveOp::GENERAL); |
| argDisp += sizeof(void*); |
| break; |
| case VMFunction::DoubleByValue: |
| // We don't pass doubles in float registers on x86, so no need |
| // to check for argPassedInFloatReg. |
| masm.passABIArg(MoveOperand(argsBase, argDisp), MoveOp::GENERAL); |
| argDisp += sizeof(void*); |
| masm.passABIArg(MoveOperand(argsBase, argDisp), MoveOp::GENERAL); |
| argDisp += sizeof(void*); |
| break; |
| case VMFunction::WordByRef: |
| masm.passABIArg(MoveOperand(argsBase, argDisp, MoveOperand::EFFECTIVE_ADDRESS), |
| MoveOp::GENERAL); |
| argDisp += sizeof(void*); |
| break; |
| case VMFunction::DoubleByRef: |
| masm.passABIArg(MoveOperand(argsBase, argDisp, MoveOperand::EFFECTIVE_ADDRESS), |
| MoveOp::GENERAL); |
| argDisp += 2 * sizeof(void*); |
| break; |
| } |
| } |
| |
| // Copy the implicit outparam, if any. |
| if (outReg != InvalidReg) |
| masm.passABIArg(outReg); |
| |
| masm.callWithABI(f.wrapped); |
| |
| // Test for failure. |
| switch (f.failType()) { |
| case Type_Object: |
| masm.branchTestPtr(Assembler::Zero, eax, eax, masm.failureLabel()); |
| break; |
| case Type_Bool: |
| masm.testb(eax, eax); |
| masm.j(Assembler::Zero, masm.failureLabel()); |
| break; |
| default: |
| MOZ_CRASH("unknown failure kind"); |
| } |
| |
| // Load the outparam and free any allocated stack. |
| switch (f.outParam) { |
| case Type_Handle: |
| masm.popRooted(f.outParamRootType, ReturnReg, JSReturnOperand); |
| break; |
| |
| case Type_Value: |
| masm.Pop(JSReturnOperand); |
| break; |
| |
| case Type_Int32: |
| case Type_Pointer: |
| masm.Pop(ReturnReg); |
| break; |
| |
| case Type_Bool: |
| masm.Pop(ReturnReg); |
| masm.movzbl(ReturnReg, ReturnReg); |
| break; |
| |
| case Type_Double: |
| if (cx->runtime()->jitSupportsFloatingPoint) |
| masm.Pop(ReturnDoubleReg); |
| else |
| masm.assumeUnreachable("Unable to pop to float reg, with no FP support."); |
| break; |
| |
| default: |
| MOZ_ASSERT(f.outParam == Type_Void); |
| break; |
| } |
| masm.leaveExitFrame(); |
| masm.retn(Imm32(sizeof(ExitFrameLayout) + |
| f.explicitStackSlots() * sizeof(void*) + |
| f.extraValuesToPop * sizeof(Value))); |
| |
| Linker linker(masm); |
| JitCode* wrapper = linker.newCode<NoGC>(cx, OTHER_CODE); |
| if (!wrapper) |
| return nullptr; |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(wrapper, "VMWrapper"); |
| #endif |
| |
| // linker.newCode may trigger a GC and sweep functionWrappers_ so we have to |
| // use relookupOrAdd instead of add. |
| if (!functionWrappers_->relookupOrAdd(p, &f, wrapper)) |
| return nullptr; |
| |
| return wrapper; |
| } |
| |
| JitCode* |
| JitRuntime::generatePreBarrier(JSContext* cx, MIRType type) |
| { |
| MacroAssembler masm; |
| |
| LiveRegisterSet save; |
| if (cx->runtime()->jitSupportsFloatingPoint) { |
| save.set() = RegisterSet(GeneralRegisterSet(Registers::VolatileMask), |
| FloatRegisterSet(FloatRegisters::VolatileMask)); |
| } else { |
| save.set() = RegisterSet(GeneralRegisterSet(Registers::VolatileMask), |
| FloatRegisterSet()); |
| } |
| masm.PushRegsInMask(save); |
| |
| MOZ_ASSERT(PreBarrierReg == edx); |
| masm.movl(ImmPtr(cx->runtime()), ecx); |
| |
| masm.setupUnalignedABICall(eax); |
| masm.passABIArg(ecx); |
| masm.passABIArg(edx); |
| masm.callWithABI(IonMarkFunction(type)); |
| |
| masm.PopRegsInMask(save); |
| masm.ret(); |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "PreBarrier"); |
| #endif |
| |
| return code; |
| } |
| |
| typedef bool (*HandleDebugTrapFn)(JSContext*, BaselineFrame*, uint8_t*, bool*); |
| static const VMFunction HandleDebugTrapInfo = FunctionInfo<HandleDebugTrapFn>(HandleDebugTrap); |
| |
| JitCode* |
| JitRuntime::generateDebugTrapHandler(JSContext* cx) |
| { |
| MacroAssembler masm; |
| #ifndef JS_USE_LINK_REGISTER |
| // The first value contains the return addres, |
| // which we pull into ICTailCallReg for tail calls. |
| masm.setFramePushed(sizeof(intptr_t)); |
| #endif |
| |
| Register scratch1 = eax; |
| Register scratch2 = ecx; |
| Register scratch3 = edx; |
| |
| // Load the return address in scratch1. |
| masm.loadPtr(Address(esp, 0), scratch1); |
| |
| // Load BaselineFrame pointer in scratch2. |
| masm.mov(ebp, scratch2); |
| masm.subPtr(Imm32(BaselineFrame::Size()), scratch2); |
| |
| // Enter a stub frame and call the HandleDebugTrap VM function. Ensure |
| // the stub frame has a nullptr ICStub pointer, since this pointer is |
| // marked during GC. |
| masm.movePtr(ImmPtr(nullptr), ICStubReg); |
| EmitBaselineEnterStubFrame(masm, scratch3); |
| |
| JitCode* code = cx->runtime()->jitRuntime()->getVMWrapper(HandleDebugTrapInfo); |
| if (!code) |
| return nullptr; |
| |
| masm.push(scratch1); |
| masm.push(scratch2); |
| EmitBaselineCallVM(code, masm); |
| |
| EmitBaselineLeaveStubFrame(masm); |
| |
| // If the stub returns |true|, we have to perform a forced return |
| // (return from the JS frame). If the stub returns |false|, just return |
| // from the trap stub so that execution continues at the current pc. |
| Label forcedReturn; |
| masm.branchTest32(Assembler::NonZero, ReturnReg, ReturnReg, &forcedReturn); |
| masm.ret(); |
| |
| masm.bind(&forcedReturn); |
| masm.loadValue(Address(ebp, BaselineFrame::reverseOffsetOfReturnValue()), |
| JSReturnOperand); |
| masm.mov(ebp, esp); |
| masm.pop(ebp); |
| |
| // Before returning, if profiling is turned on, make sure that lastProfilingFrame |
| // is set to the correct caller frame. |
| { |
| Label skipProfilingInstrumentation; |
| AbsoluteAddress addressOfEnabled(cx->runtime()->spsProfiler.addressOfEnabled()); |
| masm.branch32(Assembler::Equal, addressOfEnabled, Imm32(0), &skipProfilingInstrumentation); |
| masm.profilerExitFrame(); |
| masm.bind(&skipProfilingInstrumentation); |
| } |
| |
| masm.ret(); |
| |
| Linker linker(masm); |
| JitCode* codeDbg = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(codeDbg, "DebugTrapHandler"); |
| #endif |
| |
| return codeDbg; |
| } |
| |
| JitCode* |
| JitRuntime::generateExceptionTailStub(JSContext* cx, void* handler) |
| { |
| MacroAssembler masm; |
| |
| masm.handleFailureWithHandlerTail(handler); |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "ExceptionTailStub"); |
| #endif |
| |
| return code; |
| } |
| |
| JitCode* |
| JitRuntime::generateBailoutTailStub(JSContext* cx) |
| { |
| MacroAssembler masm; |
| |
| masm.generateBailoutTail(edx, ecx); |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "BailoutTailStub"); |
| #endif |
| |
| return code; |
| } |
| |
| JitCode* |
| JitRuntime::generateProfilerExitFrameTailStub(JSContext* cx) |
| { |
| MacroAssembler masm; |
| |
| Register scratch1 = eax; |
| Register scratch2 = ebx; |
| Register scratch3 = esi; |
| Register scratch4 = edi; |
| |
| // |
| // The code generated below expects that the current stack pointer points |
| // to an Ion or Baseline frame, at the state it would be immediately |
| // before a ret(). Thus, after this stub's business is done, it executes |
| // a ret() and returns directly to the caller script, on behalf of the |
| // callee script that jumped to this code. |
| // |
| // Thus the expected stack is: |
| // |
| // StackPointer ----+ |
| // v |
| // ..., ActualArgc, CalleeToken, Descriptor, ReturnAddr |
| // MEM-HI MEM-LOW |
| // |
| // |
| // The generated jitcode is responsible for overwriting the |
| // jitActivation->lastProfilingFrame field with a pointer to the previous |
| // Ion or Baseline jit-frame that was pushed before this one. It is also |
| // responsible for overwriting jitActivation->lastProfilingCallSite with |
| // the return address into that frame. The frame could either be an |
| // immediate "caller" frame, or it could be a frame in a previous |
| // JitActivation (if the current frame was entered from C++, and the C++ |
| // was entered by some caller jit-frame further down the stack). |
| // |
| // So this jitcode is responsible for "walking up" the jit stack, finding |
| // the previous Ion or Baseline JS frame, and storing its address and the |
| // return address into the appropriate fields on the current jitActivation. |
| // |
| // There are a fixed number of different path types that can lead to the |
| // current frame, which is either a baseline or ion frame: |
| // |
| // <Baseline-Or-Ion> |
| // ^ |
| // | |
| // ^--- Ion |
| // | |
| // ^--- Baseline Stub <---- Baseline |
| // | |
| // ^--- Argument Rectifier |
| // | ^ |
| // | | |
| // | ^--- Ion |
| // | | |
| // | ^--- Baseline Stub <---- Baseline |
| // | |
| // ^--- Entry Frame (From C++) |
| // |
| Register actReg = scratch4; |
| AbsoluteAddress activationAddr(GetJitContext()->runtime->addressOfProfilingActivation()); |
| masm.loadPtr(activationAddr, actReg); |
| |
| Address lastProfilingFrame(actReg, JitActivation::offsetOfLastProfilingFrame()); |
| Address lastProfilingCallSite(actReg, JitActivation::offsetOfLastProfilingCallSite()); |
| |
| #ifdef DEBUG |
| // Ensure that frame we are exiting is current lastProfilingFrame |
| { |
| masm.loadPtr(lastProfilingFrame, scratch1); |
| Label checkOk; |
| masm.branchPtr(Assembler::Equal, scratch1, ImmWord(0), &checkOk); |
| masm.branchPtr(Assembler::Equal, StackPointer, scratch1, &checkOk); |
| masm.assumeUnreachable( |
| "Mismatch between stored lastProfilingFrame and current stack pointer."); |
| masm.bind(&checkOk); |
| } |
| #endif |
| |
| // Load the frame descriptor into |scratch1|, figure out what to do |
| // depending on its type. |
| masm.loadPtr(Address(StackPointer, JitFrameLayout::offsetOfDescriptor()), scratch1); |
| |
| // Going into the conditionals, we will have: |
| // FrameDescriptor.size in scratch1 |
| // FrameDescriptor.type in scratch2 |
| masm.movePtr(scratch1, scratch2); |
| masm.rshiftPtr(Imm32(FRAMESIZE_SHIFT), scratch1); |
| masm.and32(Imm32((1 << FRAMETYPE_BITS) - 1), scratch2); |
| |
| // Handling of each case is dependent on FrameDescriptor.type |
| Label handle_IonJS; |
| Label handle_BaselineStub; |
| Label handle_Rectifier; |
| Label handle_IonAccessorIC; |
| Label handle_Entry; |
| Label end; |
| |
| masm.branch32(Assembler::Equal, scratch2, Imm32(JitFrame_IonJS), &handle_IonJS); |
| masm.branch32(Assembler::Equal, scratch2, Imm32(JitFrame_BaselineJS), &handle_IonJS); |
| masm.branch32(Assembler::Equal, scratch2, Imm32(JitFrame_BaselineStub), &handle_BaselineStub); |
| masm.branch32(Assembler::Equal, scratch2, Imm32(JitFrame_Rectifier), &handle_Rectifier); |
| masm.branch32(Assembler::Equal, scratch2, Imm32(JitFrame_IonAccessorIC), &handle_IonAccessorIC); |
| masm.branch32(Assembler::Equal, scratch2, Imm32(JitFrame_Entry), &handle_Entry); |
| |
| masm.assumeUnreachable("Invalid caller frame type when exiting from Ion frame."); |
| |
| // |
| // JitFrame_IonJS |
| // |
| // Stack layout: |
| // ... |
| // Ion-Descriptor |
| // Prev-FP ---> Ion-ReturnAddr |
| // ... previous frame data ... |- Descriptor.Size |
| // ... arguments ... | |
| // ActualArgc | |
| // CalleeToken |- JitFrameLayout::Size() |
| // Descriptor | |
| // FP -----> ReturnAddr | |
| // |
| masm.bind(&handle_IonJS); |
| { |
| // |scratch1| contains Descriptor.size |
| |
| // returning directly to an IonJS frame. Store return addr to frame |
| // in lastProfilingCallSite. |
| masm.loadPtr(Address(StackPointer, JitFrameLayout::offsetOfReturnAddress()), scratch2); |
| masm.storePtr(scratch2, lastProfilingCallSite); |
| |
| // Store return frame in lastProfilingFrame. |
| // scratch2 := StackPointer + Descriptor.size*1 + JitFrameLayout::Size(); |
| masm.lea(Operand(StackPointer, scratch1, TimesOne, JitFrameLayout::Size()), scratch2); |
| masm.storePtr(scratch2, lastProfilingFrame); |
| masm.ret(); |
| } |
| |
| // |
| // JitFrame_BaselineStub |
| // |
| // Look past the stub and store the frame pointer to |
| // the baselineJS frame prior to it. |
| // |
| // Stack layout: |
| // ... |
| // BL-Descriptor |
| // Prev-FP ---> BL-ReturnAddr |
| // +-----> BL-PrevFramePointer |
| // | ... BL-FrameData ... |
| // | BLStub-Descriptor |
| // | BLStub-ReturnAddr |
| // | BLStub-StubPointer | |
| // +------ BLStub-SavedFramePointer |- Descriptor.Size |
| // ... arguments ... | |
| // ActualArgc | |
| // CalleeToken |- JitFrameLayout::Size() |
| // Descriptor | |
| // FP -----> ReturnAddr | |
| // |
| // We take advantage of the fact that the stub frame saves the frame |
| // pointer pointing to the baseline frame, so a bunch of calculation can |
| // be avoided. |
| // |
| masm.bind(&handle_BaselineStub); |
| { |
| BaseIndex stubFrameReturnAddr(StackPointer, scratch1, TimesOne, |
| JitFrameLayout::Size() + |
| BaselineStubFrameLayout::offsetOfReturnAddress()); |
| masm.loadPtr(stubFrameReturnAddr, scratch2); |
| masm.storePtr(scratch2, lastProfilingCallSite); |
| |
| BaseIndex stubFrameSavedFramePtr(StackPointer, scratch1, TimesOne, |
| JitFrameLayout::Size() - (2 * sizeof(void*))); |
| masm.loadPtr(stubFrameSavedFramePtr, scratch2); |
| masm.addPtr(Imm32(sizeof(void*)), scratch2); // Skip past BL-PrevFramePtr |
| masm.storePtr(scratch2, lastProfilingFrame); |
| masm.ret(); |
| } |
| |
| |
| // |
| // JitFrame_Rectifier |
| // |
| // The rectifier frame can be preceded by either an IonJS or a |
| // BaselineStub frame. |
| // |
| // Stack layout if caller of rectifier was Ion: |
| // |
| // Ion-Descriptor |
| // Ion-ReturnAddr |
| // ... ion frame data ... |- Rect-Descriptor.Size |
| // < COMMON LAYOUT > |
| // |
| // Stack layout if caller of rectifier was Baseline: |
| // |
| // BL-Descriptor |
| // Prev-FP ---> BL-ReturnAddr |
| // +-----> BL-SavedFramePointer |
| // | ... baseline frame data ... |
| // | BLStub-Descriptor |
| // | BLStub-ReturnAddr |
| // | BLStub-StubPointer | |
| // +------ BLStub-SavedFramePointer |- Rect-Descriptor.Size |
| // ... args to rectifier ... | |
| // < COMMON LAYOUT > |
| // |
| // Common stack layout: |
| // |
| // ActualArgc | |
| // CalleeToken |- IonRectitiferFrameLayout::Size() |
| // Rect-Descriptor | |
| // Rect-ReturnAddr | |
| // ... rectifier data & args ... |- Descriptor.Size |
| // ActualArgc | |
| // CalleeToken |- JitFrameLayout::Size() |
| // Descriptor | |
| // FP -----> ReturnAddr | |
| // |
| masm.bind(&handle_Rectifier); |
| { |
| // scratch2 := StackPointer + Descriptor.size + JitFrameLayout::Size() |
| masm.lea(Operand(StackPointer, scratch1, TimesOne, JitFrameLayout::Size()), scratch2); |
| masm.loadPtr(Address(scratch2, RectifierFrameLayout::offsetOfDescriptor()), scratch3); |
| masm.movePtr(scratch3, scratch1); |
| masm.and32(Imm32((1 << FRAMETYPE_BITS) - 1), scratch3); |
| masm.rshiftPtr(Imm32(FRAMESIZE_SHIFT), scratch1); |
| |
| // Now |scratch1| contains Rect-Descriptor.Size |
| // and |scratch2| points to Rectifier frame |
| // and |scratch3| contains Rect-Descriptor.Type |
| |
| // Check for either Ion or BaselineStub frame. |
| Label handle_Rectifier_BaselineStub; |
| masm.branch32(Assembler::NotEqual, scratch3, Imm32(JitFrame_IonJS), |
| &handle_Rectifier_BaselineStub); |
| |
| // Handle Rectifier <- IonJS |
| // scratch3 := RectFrame[ReturnAddr] |
| masm.loadPtr(Address(scratch2, RectifierFrameLayout::offsetOfReturnAddress()), scratch3); |
| masm.storePtr(scratch3, lastProfilingCallSite); |
| |
| // scratch3 := RectFrame + Rect-Descriptor.Size + RectifierFrameLayout::Size() |
| masm.lea(Operand(scratch2, scratch1, TimesOne, RectifierFrameLayout::Size()), scratch3); |
| masm.storePtr(scratch3, lastProfilingFrame); |
| masm.ret(); |
| |
| // Handle Rectifier <- BaselineStub <- BaselineJS |
| masm.bind(&handle_Rectifier_BaselineStub); |
| #ifdef DEBUG |
| { |
| Label checkOk; |
| masm.branch32(Assembler::Equal, scratch3, Imm32(JitFrame_BaselineStub), &checkOk); |
| masm.assumeUnreachable("Unrecognized frame preceding baselineStub."); |
| masm.bind(&checkOk); |
| } |
| #endif |
| BaseIndex stubFrameReturnAddr(scratch2, scratch1, TimesOne, |
| RectifierFrameLayout::Size() + |
| BaselineStubFrameLayout::offsetOfReturnAddress()); |
| masm.loadPtr(stubFrameReturnAddr, scratch3); |
| masm.storePtr(scratch3, lastProfilingCallSite); |
| |
| BaseIndex stubFrameSavedFramePtr(scratch2, scratch1, TimesOne, |
| RectifierFrameLayout::Size() - (2 * sizeof(void*))); |
| masm.loadPtr(stubFrameSavedFramePtr, scratch3); |
| masm.addPtr(Imm32(sizeof(void*)), scratch3); |
| masm.storePtr(scratch3, lastProfilingFrame); |
| masm.ret(); |
| } |
| |
| // JitFrame_IonAccessorIC |
| // |
| // The caller is always an IonJS frame. |
| // |
| // Ion-Descriptor |
| // Ion-ReturnAddr |
| // ... ion frame data ... |- AccFrame-Descriptor.Size |
| // StubCode | |
| // AccFrame-Descriptor |- IonAccessorICFrameLayout::Size() |
| // AccFrame-ReturnAddr | |
| // ... accessor frame data & args ... |- Descriptor.Size |
| // ActualArgc | |
| // CalleeToken |- JitFrameLayout::Size() |
| // Descriptor | |
| // FP -----> ReturnAddr | |
| masm.bind(&handle_IonAccessorIC); |
| { |
| // scratch2 := StackPointer + Descriptor.size + JitFrameLayout::Size() |
| masm.lea(Operand(StackPointer, scratch1, TimesOne, JitFrameLayout::Size()), scratch2); |
| |
| // scratch3 := AccFrame-Descriptor.Size |
| masm.loadPtr(Address(scratch2, IonAccessorICFrameLayout::offsetOfDescriptor()), scratch3); |
| #ifdef DEBUG |
| // Assert previous frame is an IonJS frame. |
| masm.movePtr(scratch3, scratch1); |
| masm.and32(Imm32((1 << FRAMETYPE_BITS) - 1), scratch1); |
| { |
| Label checkOk; |
| masm.branch32(Assembler::Equal, scratch1, Imm32(JitFrame_IonJS), &checkOk); |
| masm.assumeUnreachable("IonAccessorIC frame must be preceded by IonJS frame"); |
| masm.bind(&checkOk); |
| } |
| #endif |
| masm.rshiftPtr(Imm32(FRAMESIZE_SHIFT), scratch3); |
| |
| // lastProfilingCallSite := AccFrame-ReturnAddr |
| masm.loadPtr(Address(scratch2, IonAccessorICFrameLayout::offsetOfReturnAddress()), scratch1); |
| masm.storePtr(scratch1, lastProfilingCallSite); |
| |
| // lastProfilingFrame := AccessorFrame + AccFrame-Descriptor.Size + |
| // IonAccessorICFrameLayout::Size() |
| masm.lea(Operand(scratch2, scratch3, TimesOne, IonAccessorICFrameLayout::Size()), scratch1); |
| masm.storePtr(scratch1, lastProfilingFrame); |
| masm.ret(); |
| } |
| |
| // |
| // JitFrame_Entry |
| // |
| // If at an entry frame, store null into both fields. |
| // |
| masm.bind(&handle_Entry); |
| { |
| masm.movePtr(ImmPtr(nullptr), scratch1); |
| masm.storePtr(scratch1, lastProfilingCallSite); |
| masm.storePtr(scratch1, lastProfilingFrame); |
| masm.ret(); |
| } |
| |
| Linker linker(masm); |
| JitCode* code = linker.newCode<NoGC>(cx, OTHER_CODE); |
| |
| #ifdef JS_ION_PERF |
| writePerfSpewerJitCodeProfile(code, "ProfilerExitFrameStub"); |
| #endif |
| |
| return code; |
| } |