| $! |
| $! MAKEAPPS.COM |
| $! Written By: Robert Byer |
| $! Vice-President |
| $! A-Com Computing, Inc. |
| $! byer@mail.all-net.net |
| $! |
| $! Changes by Richard Levitte <richard@levitte.org> |
| $! Zoltan Arpadffy <zoli@polarhome.com> |
| $! |
| $! This command files compiles and creates all the various different |
| $! "application" programs for the different types of encryption for OpenSSL. |
| $! The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes |
| $! ALPHA, IA64 or VAX, depending on your machine architecture. |
| $! |
| $! It was written so it would try to determine what "C" compiler to |
| $! use or you can specify which "C" compiler to use. |
| $! |
| $! Specify DEBUG or NODEBUG as P1 to compile with or without debugger |
| $! information. |
| $! |
| $! Specify which compiler at P2 to try to compile under. |
| $! |
| $! VAXC For VAX C. |
| $! DECC For DEC C. |
| $! GNUC For GNU C. |
| $! |
| $! If you don't specify a compiler, it will try to determine which |
| $! "C" compiler to use. |
| $! |
| $! P3, if defined, sets a TCP/IP library to use, through one of the following |
| $! keywords: |
| $! |
| $! UCX for UCX |
| $! SOCKETSHR for SOCKETSHR+NETLIB |
| $! TCPIP for TCPIP (post UCX) |
| $! |
| $! P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) |
| $! |
| $! P5, if defined, sets a choice of programs to compile. |
| $! |
| $! P6, if defined, specifies the C pointer size. Ignored on VAX. |
| $! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.) |
| $! Supported values are: |
| $! |
| $! "" Compile with default (/NOPOINTER_SIZE) |
| $! 32 Compile with /POINTER_SIZE=32 (SHORT) |
| $! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]) |
| $! (Automatically select ARGV if compiler supports it.) |
| $! 64= Compile with /POINTER_SIZE=64 (LONG). |
| $! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV). |
| $! |
| $! P7, if defined, specifies a directory where ZLIB files (zlib.h, |
| $! libz.olb) may be found. Optionally, a non-default object library |
| $! name may be included ("dev:[dir]libz_64.olb", for example). |
| $! |
| $! |
| $! Announce/identify. |
| $! |
| $ proc = f$environment( "procedure") |
| $ write sys$output "@@@ "+ - |
| f$parse( proc, , , "name")+ f$parse( proc, , , "type") |
| $! |
| $ on control_c then goto exit |
| $! |
| $! Define A TCP/IP Library That We Will Need To Link To. |
| $! (That Is, If We Need To Link To One.) |
| $! |
| $ TCPIP_LIB = "" |
| $ ZLIB_LIB = "" |
| $! |
| $! Check What Architecture We Are Using. |
| $! |
| $ IF (F$GETSYI("CPU").LT.128) |
| $ THEN |
| $! |
| $! The Architecture Is VAX. |
| $! |
| $ ARCH = "VAX" |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! The Architecture Is Alpha, IA64 or whatever comes in the future. |
| $! |
| $ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") |
| $ IF (ARCH .EQS. "") THEN ARCH = "UNK" |
| $! |
| $! End The Architecture Check. |
| $! |
| $ ENDIF |
| $! |
| $ ARCHD = ARCH |
| $ LIB32 = "32" |
| $ OPT_FILE = "" |
| $ POINTER_SIZE = "" |
| $! |
| $! Define what programs should be compiled |
| $! |
| $ PROGRAMS := OPENSSL |
| $! |
| $! Check To Make Sure We Have Valid Command Line Parameters. |
| $! |
| $ GOSUB CHECK_OPTIONS |
| $! |
| $! Define The CRYPTO Library. |
| $! |
| $ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB |
| $! |
| $! Define The SSL Library. |
| $! |
| $ SSL_LIB := SYS$DISK:[-.'ARCHD'.EXE.SSL]SSL_LIBSSL'LIB32'.OLB |
| $! |
| $! Define The OBJ and EXE Directories. |
| $! |
| $ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.APPS] |
| $ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.APPS] |
| $! |
| $! Specify the destination directory in any /MAP option. |
| $! |
| $ if (LINKMAP .eqs. "MAP") |
| $ then |
| $ LINKMAP = LINKMAP+ "=''EXE_DIR'" |
| $ endif |
| $! |
| $! Add the location prefix to the linker options file name. |
| $! |
| $ if (OPT_FILE .nes. "") |
| $ then |
| $ OPT_FILE = EXE_DIR+ OPT_FILE |
| $ endif |
| $! |
| $! Initialise logical names and such |
| $! |
| $ GOSUB INITIALISE |
| $! |
| $! Tell The User What Kind of Machine We Run On. |
| $! |
| $ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'" |
| $! |
| $! Check To See If The OBJ Directory Exists. |
| $! |
| $ IF (F$PARSE(OBJ_DIR).EQS."") |
| $ THEN |
| $! |
| $! It Dosen't Exist, So Create It. |
| $! |
| $ CREATE/DIRECTORY 'OBJ_DIR' |
| $! |
| $! End The OBJ Directory Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If The EXE Directory Exists. |
| $! |
| $ IF (F$PARSE(EXE_DIR).EQS."") |
| $ THEN |
| $! |
| $! It Dosen't Exist, So Create It. |
| $! |
| $ CREATE/DIRECTORY 'EXE_DIR' |
| $! |
| $! End The EXE Directory Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Have The Proper Libraries. |
| $! |
| $ GOSUB LIB_CHECK |
| $! |
| $! Check To See If We Have A Linker Option File. |
| $! |
| $ GOSUB CHECK_OPT_FILE |
| $! |
| $! Define The Application Files. |
| $! NOTE: Some might think this list ugly. However, it's made this way to |
| $! reflect the E_OBJ variable in Makefile as closely as possible, thereby |
| $! making it fairly easy to verify that the lists are the same. |
| $! |
| $ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+- |
| "CA,PKCS7,CRL2P7,CRL,"+- |
| "RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+- |
| "X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+- |
| "S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+- |
| "CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ - |
| "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS,SRP" |
| $! |
| $ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT" |
| $! |
| $ TCPIP_PROGRAMS = ",," |
| $ IF COMPILER .EQS. "VAXC" THEN - |
| TCPIP_PROGRAMS = ",OPENSSL," |
| $! |
| $! Setup exceptional compilations |
| $! |
| $ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT," |
| $! |
| $ PHASE := LIB |
| $! |
| $ RESTART: |
| $! |
| $! Define An App Counter And Set It To "0". |
| $! |
| $ APP_COUNTER = 0 |
| $! |
| $! Top Of The App Loop. |
| $! |
| $ NEXT_APP: |
| $! |
| $! Make The Application File Name |
| $! |
| $ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM") |
| $! |
| $! Create The Executable File Name. |
| $! |
| $ EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE" |
| $! |
| $! Check To See If We Are At The End Of The File List. |
| $! |
| $ IF (CURRENT_APP.EQS.",") |
| $ THEN |
| $ IF (PHASE.EQS."LIB") |
| $ THEN |
| $ PHASE := APP |
| $ GOTO RESTART |
| $ ELSE |
| $ GOTO APP_DONE |
| $ ENDIF |
| $ ENDIF |
| $! |
| $! Increment The Counter. |
| $! |
| $ APP_COUNTER = APP_COUNTER + 1 |
| $! |
| $! Decide if we're building the object files or not. |
| $! |
| $ IF (PHASE.EQS."LIB") |
| $ THEN |
| $! |
| $! Define A Library File Counter And Set It To "-1". |
| $! -1 Means The Application File Name Is To Be Used. |
| $! |
| $ LIB_COUNTER = -1 |
| $! |
| $! Create a .OPT file for the object files |
| $! |
| $ OPEN /WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT |
| $! |
| $! Top Of The File Loop. |
| $! |
| $ NEXT_LIB: |
| $! |
| $! O.K, Extract The File Name From The File List. |
| $! |
| $ IF LIB_COUNTER .GE. 0 |
| $ THEN |
| $ FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM") |
| $ ELSE |
| $ FILE_NAME = CURRENT_APP |
| $ ENDIF |
| $! |
| $! Check To See If We Are At The End Of The File List. |
| $! |
| $ IF (FILE_NAME.EQS.",") |
| $ THEN |
| $ CLOSE OBJECTS |
| $ GOTO NEXT_APP |
| $ ENDIF |
| $! |
| $! Increment The Counter. |
| $! |
| $ LIB_COUNTER = LIB_COUNTER + 1 |
| $! |
| $! Create The Source File Name. |
| $! |
| $ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C" |
| $! |
| $! Create The Object File Name. |
| $! |
| $ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ" |
| $ ON WARNING THEN GOTO NEXT_LIB |
| $! |
| $! Check To See If The File We Want To Compile Actually Exists. |
| $! |
| $ IF (F$SEARCH(SOURCE_FILE).EQS."") |
| $ THEN |
| $! |
| $! Tell The User That The File Dosen't Exist. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Exit The Build. |
| $! |
| $ GOTO EXIT |
| $! |
| $! End The File Exist Check. |
| $! |
| $ ENDIF |
| $! |
| $! Tell The User What We Are Building. |
| $! |
| $ IF (PHASE.EQS."LIB") |
| $ THEN |
| $ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File." |
| $ ELSE |
| $ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program." |
| $ ENDIF |
| $! |
| $! Compile The File. |
| $! |
| $ ON ERROR THEN GOTO NEXT_LIB |
| $ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2 |
| $ THEN |
| $ CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE' |
| $ ELSE |
| $ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE' |
| $ ENDIF |
| $ WRITE OBJECTS OBJECT_FILE |
| $! |
| $ GOTO NEXT_LIB |
| $ ENDIF |
| $! |
| $! Check if this program works well without a TCPIP library |
| $! |
| $ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS |
| $ THEN |
| $ WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library. Can't link. Skipping..." |
| $ GOTO NEXT_APP |
| $ ENDIF |
| $! |
| $! Link The Program. |
| $! |
| $ ON WARNING THEN GOTO NEXT_APP |
| $! |
| $! Don't Link With The RSAREF Routines And TCP/IP Library. |
| $! |
| $ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /EXE='EXE_FILE' - |
| 'EXE_DIR''CURRENT_APP'.OPT /OPTIONS, - |
| 'SSL_LIB' /LIBRARY, - |
| 'CRYPTO_LIB' /LIBRARY - |
| 'TCPIP_LIB' - |
| 'ZLIB_LIB' - |
| ,'OPT_FILE' /OPTIONS |
| $! |
| $! Go Back And Do It Again. |
| $! |
| $ GOTO NEXT_APP |
| $! |
| $! All Done With This File. |
| $! |
| $ APP_DONE: |
| $ EXIT: |
| $! |
| $! All Done, Time To Clean Up And Exit. |
| $! |
| $ GOSUB CLEANUP |
| $ EXIT |
| $! |
| $! Check For The Link Option FIle. |
| $! |
| $ CHECK_OPT_FILE: |
| $! |
| $! Check To See If We Need To Make A VAX C Option File. |
| $! |
| $ IF (COMPILER.EQS."VAXC") |
| $ THEN |
| $! |
| $! Check To See If We Already Have A VAX C Linker Option File. |
| $! |
| $ IF (F$SEARCH(OPT_FILE).EQS."") |
| $ THEN |
| $! |
| $! We Need A VAX C Linker Option File. |
| $! |
| $ CREATE 'OPT_FILE' |
| $DECK |
| ! |
| ! Default System Options File To Link Against |
| ! The Sharable VAX C Runtime Library. |
| ! |
| SYS$SHARE:VAXCRTL.EXE/SHARE |
| $EOD |
| $! |
| $! End The Option File Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The VAXC Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Need A GNU C Option File. |
| $! |
| $ IF (COMPILER.EQS."GNUC") |
| $ THEN |
| $! |
| $! Check To See If We Already Have A GNU C Linker Option File. |
| $! |
| $ IF (F$SEARCH(OPT_FILE).EQS."") |
| $ THEN |
| $! |
| $! We Need A GNU C Linker Option File. |
| $! |
| $ CREATE 'OPT_FILE' |
| $DECK |
| ! |
| ! Default System Options File To Link Against |
| ! The Sharable C Runtime Library. |
| ! |
| GNU_CC:[000000]GCCLIB/LIBRARY |
| SYS$SHARE:VAXCRTL/SHARE |
| $EOD |
| $! |
| $! End The Option File Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The GNU C Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Need A DEC C Option File. |
| $! |
| $ IF (COMPILER.EQS."DECC") |
| $ THEN |
| $! |
| $! Check To See If We Already Have A DEC C Linker Option File. |
| $! |
| $ IF (F$SEARCH(OPT_FILE).EQS."") |
| $ THEN |
| $! |
| $! Figure Out If We Need An AXP Or A VAX Linker Option File. |
| $! |
| $ IF ARCH.EQS."VAX" |
| $ THEN |
| $! |
| $! We Need A DEC C Linker Option File For VAX. |
| $! |
| $ CREATE 'OPT_FILE' |
| $DECK |
| ! |
| ! Default System Options File To Link Against |
| ! The Sharable DEC C Runtime Library. |
| ! |
| SYS$SHARE:DECC$SHR.EXE/SHARE |
| $EOD |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Create The non-VAX Linker Option File. |
| $! |
| $ CREATE 'OPT_FILE' |
| $DECK |
| ! |
| ! Default System Options File For non-VAX To Link Against |
| ! The Sharable C Runtime Library. |
| ! |
| SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE |
| SYS$SHARE:CMA$OPEN_RTL/SHARE |
| $EOD |
| $! |
| $! End The DEC C Option File Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The Option File Search. |
| $! |
| $ ENDIF |
| $! |
| $! End The DEC C Check. |
| $! |
| $ ENDIF |
| $! |
| $! Tell The User What Linker Option File We Are Using. |
| $! |
| $ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"." |
| $! |
| $! Time To RETURN. |
| $! |
| $ RETURN |
| $! |
| $! Check To See If We Have The Appropiate Libraries. |
| $! |
| $ LIB_CHECK: |
| $! |
| $! Look For The Library LIBCRYPTO.OLB. |
| $! |
| $ IF (F$SEARCH(CRYPTO_LIB).EQS."") |
| $ THEN |
| $! |
| $! Tell The User We Can't Find The LIBCRYPTO.OLB Library. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "Can't Find The Library ",CRYPTO_LIB,"." |
| $ WRITE SYS$OUTPUT "We Can't Link Without It." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Since We Can't Link Without It, Exit. |
| $! |
| $ EXIT |
| $! |
| $! End The Crypto Library Check. |
| $! |
| $ ENDIF |
| $! |
| $! Look For The Library LIBSSL.OLB. |
| $! |
| $ IF (F$SEARCH(SSL_LIB).EQS."") |
| $ THEN |
| $! |
| $! Tell The User We Can't Find The LIBSSL.OLB Library. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "Can't Find The Library ",SSL_LIB,"." |
| $ WRITE SYS$OUTPUT "Some Of The Test Programs Need To Link To It." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Since We Can't Link Without It, Exit. |
| $! |
| $ EXIT |
| $! |
| $! End The SSL Library Check. |
| $! |
| $ ENDIF |
| $! |
| $! Time To Return. |
| $! |
| $ RETURN |
| $! |
| $! Check The User's Options. |
| $! |
| $ CHECK_OPTIONS: |
| $! |
| $! Check To See If P1 Is Blank. |
| $! |
| $ IF (P1.EQS."NODEBUG") |
| $ THEN |
| $! |
| $! P1 Is NODEBUG, So Compile Without Debugger Information. |
| $! |
| $ DEBUGGER = "NODEBUG" |
| $ LINKMAP = "NOMAP" |
| $ TRACEBACK = "NOTRACEBACK" |
| $ GCC_OPTIMIZE = "OPTIMIZE" |
| $ CC_OPTIMIZE = "OPTIMIZE" |
| $ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile." |
| $ WRITE SYS$OUTPUT "Compiling With Compiler Optimization." |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Check To See If We Are To Compile With Debugger Information. |
| $! |
| $ IF (P1.EQS."DEBUG") |
| $ THEN |
| $! |
| $! Compile With Debugger Information. |
| $! |
| $ DEBUGGER = "DEBUG" |
| $ LINKMAP = "MAP" |
| $ TRACEBACK = "TRACEBACK" |
| $ GCC_OPTIMIZE = "NOOPTIMIZE" |
| $ CC_OPTIMIZE = "NOOPTIMIZE" |
| $ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile." |
| $ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization." |
| $ ELSE |
| $! |
| $! Tell The User Entered An Invalid Option. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." |
| $ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ EXIT |
| $! |
| $! End The Valid Argument Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The P1 Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check P6 (POINTER_SIZE). |
| $! |
| $ IF (P6 .NES. "") .AND. (ARCH .NES. "VAX") |
| $ THEN |
| $! |
| $ IF (P6 .EQS. "32") |
| $ THEN |
| $ POINTER_SIZE = " /POINTER_SIZE=32" |
| $ ELSE |
| $ POINTER_SIZE = F$EDIT( P6, "COLLAPSE, UPCASE") |
| $ IF ((POINTER_SIZE .EQS. "64") .OR. - |
| (POINTER_SIZE .EQS. "64=") .OR. - |
| (POINTER_SIZE .EQS. "64=ARGV")) |
| $ THEN |
| $ ARCHD = ARCH+ "_64" |
| $ LIB32 = "" |
| $ IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=") |
| $ THEN |
| $! Explicit user choice: "64" or "64=ARGV". |
| $ IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64" |
| $ ELSE |
| $ SET NOON |
| $ DEFINE /USER_MODE SYS$OUTPUT NL: |
| $ DEFINE /USER_MODE SYS$ERROR NL: |
| $ CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL: |
| $ IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000 |
| $ THEN |
| $ ! If we got here, it means DCL complained like this: |
| $ ! %DCL-W-NOVALU, value not allowed - remove value specification |
| $ ! \64=\ |
| $ ! |
| $ ! If the compiler was run, logicals defined in /USER would |
| $ ! have been deassigned automatically. However, when DCL |
| $ ! complains, they aren't, so we do it here (it might be |
| $ ! unnecessary, but just in case there will be another error |
| $ ! message further on that we don't want to miss) |
| $ DEASSIGN /USER_MODE SYS$ERROR |
| $ DEASSIGN /USER_MODE SYS$OUTPUT |
| $ ELSE |
| $ POINTER_SIZE = POINTER_SIZE + "=ARGV" |
| $ ENDIF |
| $ SET ON |
| $ ENDIF |
| $ POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'" |
| $! |
| $ ELSE |
| $! |
| $! Tell The User Entered An Invalid Option. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ", P6, - |
| " Is Invalid. The Valid Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT - |
| " """" : Compile with default (short) pointers." |
| $ WRITE SYS$OUTPUT - |
| " 32 : Compile with 32-bit (short) pointers." |
| $ WRITE SYS$OUTPUT - |
| " 64 : Compile with 64-bit (long) pointers (auto ARGV)." |
| $ WRITE SYS$OUTPUT - |
| " 64= : Compile with 64-bit (long) pointers (no ARGV)." |
| $ WRITE SYS$OUTPUT - |
| " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ EXIT |
| $! |
| $ ENDIF |
| $! |
| $ ENDIF |
| $! |
| $! End The P6 (POINTER_SIZE) Check. |
| $! |
| $ ENDIF |
| $! |
| $! Set basic C compiler /INCLUDE directories. |
| $! |
| $ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]" |
| $! |
| $! Check To See If P2 Is Blank. |
| $! |
| $ IF (P2.EQS."") |
| $ THEN |
| $! |
| $! O.K., The User Didn't Specify A Compiler, Let's Try To |
| $! Find Out Which One To Use. |
| $! |
| $! Check To See If We Have GNU C. |
| $! |
| $ IF (F$TRNLNM("GNU_CC").NES."") |
| $ THEN |
| $! |
| $! Looks Like GNUC, Set To Use GNUC. |
| $! |
| $ P2 = "GNUC" |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Check To See If We Have VAXC Or DECC. |
| $! |
| $ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."") |
| $ THEN |
| $! |
| $! Looks Like DECC, Set To Use DECC. |
| $! |
| $ P2 = "DECC" |
| $! |
| $! Else... |
| $! |
| $ ELSE |
| $! |
| $! Looks Like VAXC, Set To Use VAXC. |
| $! |
| $ P2 = "VAXC" |
| $! |
| $! End The VAXC Compiler Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The DECC & VAXC Compiler Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The Compiler Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Have A Option For P3. |
| $! |
| $ IF (P3.EQS."") |
| $ THEN |
| $! |
| $! Find out what socket library we have available |
| $! |
| $ IF F$PARSE("SOCKETSHR:") .NES. "" |
| $ THEN |
| $! |
| $! We have SOCKETSHR, and it is my opinion that it's the best to use. |
| $! |
| $ P3 = "SOCKETSHR" |
| $! |
| $! Tell the user |
| $! |
| $ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" |
| $! |
| $! Else, let's look for something else |
| $! |
| $ ELSE |
| $! |
| $! Like UCX (the reason to do this before Multinet is that the UCX |
| $! emulation is easier to use...) |
| $! |
| $ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" - |
| .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" - |
| .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. "" |
| $ THEN |
| $! |
| $! Last resort: a UCX or UCX-compatible library |
| $! |
| $ P3 = "UCX" |
| $! |
| $! Tell the user |
| $! |
| $ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" |
| $! |
| $! That was all... |
| $! |
| $ ENDIF |
| $ ENDIF |
| $ ENDIF |
| $! |
| $! Set Up Initial CC Definitions, Possibly With User Ones |
| $! |
| $ CCDEFS = "MONOLITH" |
| $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS |
| $ CCEXTRAFLAGS = "" |
| $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS |
| $ CCDISABLEWARNINGS = "" !!! "MAYLOSEDATA3" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR" |
| $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" |
| $ THEN |
| $ IF CCDISABLEWARNINGS .NES. "" THEN CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," |
| $ CCDISABLEWARNINGS = CCDISABLEWARNINGS + USER_CCDISABLEWARNINGS |
| $ ENDIF |
| $! |
| $! Check To See If We Have A ZLIB Option. |
| $! |
| $ ZLIB = P7 |
| $ IF (ZLIB .NES. "") |
| $ THEN |
| $! |
| $! Check for expected ZLIB files. |
| $! |
| $ err = 0 |
| $ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY") |
| $ if (f$search( file1) .eqs. "") |
| $ then |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." |
| $ WRITE SYS$OUTPUT " Can't find header: ''file1'" |
| $ err = 1 |
| $ endif |
| $ file1 = f$parse( "A.;", ZLIB)- "A.;" |
| $! |
| $ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY") |
| $ if (f$search( file2) .eqs. "") |
| $ then |
| $ if (err .eq. 0) |
| $ then |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." |
| $ endif |
| $ WRITE SYS$OUTPUT " Can't find library: ''file2'" |
| $ WRITE SYS$OUTPUT "" |
| $ err = err+ 2 |
| $ endif |
| $ if (err .eq. 1) |
| $ then |
| $ WRITE SYS$OUTPUT "" |
| $ endif |
| $! |
| $ if (err .ne. 0) |
| $ then |
| $ EXIT |
| $ endif |
| $! |
| $ CCDEFS = """ZLIB=1"", "+ CCDEFS |
| $ CC_INCLUDES = CC_INCLUDES+ ", "+ file1 |
| $ ZLIB_LIB = ", ''file2' /library" |
| $! |
| $! Print info |
| $! |
| $ WRITE SYS$OUTPUT "ZLIB library spec: ", file2 |
| $! |
| $! End The ZLIB Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If The User Entered A Valid Parameter. |
| $! |
| $ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC") |
| $ THEN |
| $! |
| $! Check To See If The User Wanted DECC. |
| $! |
| $ IF (P2.EQS."DECC") |
| $ THEN |
| $! |
| $! Looks Like DECC, Set To Use DECC. |
| $! |
| $ COMPILER = "DECC" |
| $! |
| $! Tell The User We Are Using DECC. |
| $! |
| $ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." |
| $! |
| $! Use DECC... |
| $! |
| $ CC = "CC" |
| $ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" - |
| THEN CC = "CC/DECC" |
| $ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ - |
| "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + - |
| " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS |
| $! |
| $! Define The Linker Options File Name. |
| $! |
| $ OPT_FILE = "VAX_DECC_OPTIONS.OPT" |
| $! |
| $! End DECC Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Are To Use VAXC. |
| $! |
| $ IF (P2.EQS."VAXC") |
| $ THEN |
| $! |
| $! Looks Like VAXC, Set To Use VAXC. |
| $! |
| $ COMPILER = "VAXC" |
| $! |
| $! Tell The User We Are Using VAX C. |
| $ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." |
| $! |
| $! Compile Using VAXC. |
| $! |
| $ CC = "CC" |
| $ IF ARCH.NES."VAX" |
| $ THEN |
| $ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!" |
| $ EXIT |
| $ ENDIF |
| $ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC" |
| $ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - |
| "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS |
| $ CCDEFS = CCDEFS + ",""VAXC""" |
| $! |
| $! Define <sys> As SYS$COMMON:[SYSLIB] |
| $! |
| $ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB] |
| $! |
| $! Define The Linker Options File Name. |
| $! |
| $ OPT_FILE = "VAX_VAXC_OPTIONS.OPT" |
| $! |
| $! End VAXC Check |
| $! |
| $ ENDIF |
| $! |
| $! Check To See If We Are To Use GNU C. |
| $! |
| $ IF (P2.EQS."GNUC") |
| $ THEN |
| $! |
| $! Looks Like GNUC, Set To Use GNUC. |
| $! |
| $ COMPILER = "GNUC" |
| $! |
| $! Tell The User We Are Using GNUC. |
| $! |
| $ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." |
| $! |
| $! Use GNU C... |
| $! |
| $ IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC |
| $ CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - |
| "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS |
| $! |
| $! Define The Linker Options File Name. |
| $! |
| $ OPT_FILE = "VAX_GNUC_OPTIONS.OPT" |
| $! |
| $! End The GNU C Check. |
| $! |
| $ ENDIF |
| $! |
| $! Set up default defines |
| $! |
| $ CCDEFS = """FLAT_INC=1""," + CCDEFS |
| $! |
| $! Else The User Entered An Invalid Argument. |
| $! |
| $ ELSE |
| $! |
| $! Tell The User We Don't Know What They Want. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." |
| $ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." |
| $ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ EXIT |
| $ ENDIF |
| $! |
| $! Time to check the contents, and to make sure we get the correct library. |
| $! |
| $ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" - |
| .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE" |
| $ THEN |
| $! |
| $! Check to see if SOCKETSHR was chosen |
| $! |
| $ IF P3.EQS."SOCKETSHR" |
| $ THEN |
| $! |
| $! Set the library to use SOCKETSHR |
| $! |
| $ TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS" |
| $! |
| $! Done with SOCKETSHR |
| $! |
| $ ENDIF |
| $! |
| $! Check to see if MULTINET was chosen |
| $! |
| $ IF P3.EQS."MULTINET" |
| $ THEN |
| $! |
| $! Set the library to use UCX emulation. |
| $! |
| $ P3 = "UCX" |
| $! |
| $! Done with MULTINET |
| $! |
| $ ENDIF |
| $! |
| $! Check to see if UCX was chosen |
| $! |
| $ IF P3.EQS."UCX" |
| $ THEN |
| $! |
| $! Set the library to use UCX. |
| $! |
| $ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS" |
| $ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" |
| $ THEN |
| $ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS" |
| $ ELSE |
| $ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN - |
| TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS" |
| $ ENDIF |
| $! |
| $! Done with UCX |
| $! |
| $ ENDIF |
| $! |
| $! Check to see if TCPIP (post UCX) was chosen |
| $! |
| $ IF P3.EQS."TCPIP" |
| $ THEN |
| $! |
| $! Set the library to use TCPIP. |
| $! |
| $ TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS" |
| $! |
| $! Done with TCPIP |
| $! |
| $ ENDIF |
| $! |
| $! Check to see if NONE was chosen |
| $! |
| $ IF P3.EQS."NONE" |
| $ THEN |
| $! |
| $! Do not use TCPIP. |
| $! |
| $ TCPIP_LIB = "" |
| $! |
| $! Done with TCPIP |
| $! |
| $ ENDIF |
| $! |
| $! Add TCP/IP type to CC definitions. |
| $! |
| $ CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'" |
| $! |
| $! Print info |
| $! |
| $ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- "," |
| $! |
| $! Else The User Entered An Invalid Argument. |
| $! |
| $ ELSE |
| $! |
| $! Tell The User We Don't Know What They Want. |
| $! |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" |
| $ WRITE SYS$OUTPUT "" |
| $ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." |
| $ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." |
| $ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library." |
| $ WRITE SYS$OUTPUT "" |
| $! |
| $! Time To EXIT. |
| $! |
| $ EXIT |
| $! |
| $! Done with TCP/IP libraries |
| $! |
| $ ENDIF |
| $! |
| $! Finish up the definition of CC. |
| $! |
| $ IF COMPILER .EQS. "DECC" |
| $ THEN |
| $! Not all compiler versions support MAYLOSEDATA3. |
| $ OPT_TEST = "MAYLOSEDATA3" |
| $ DEFINE /USER_MODE SYS$ERROR NL: |
| $ DEFINE /USER_MODE SYS$OUTPUT NL: |
| $ 'CC' /NOCROSS_REFERENCE /NOLIST /NOOBJECT - |
| /WARNINGS = DISABLE = ('OPT_TEST', EMPTYFILE) NL: |
| $ IF ($SEVERITY) |
| $ THEN |
| $ IF CCDISABLEWARNINGS .NES. "" THEN - |
| CCDISABLEWARNINGS = CCDISABLEWARNINGS+ "," |
| $ CCDISABLEWARNINGS = CCDISABLEWARNINGS+ OPT_TEST |
| $ ENDIF |
| $ IF CCDISABLEWARNINGS .NES. "" |
| $ THEN |
| $ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))" |
| $ ENDIF |
| $ ELSE |
| $ CCDISABLEWARNINGS = "" |
| $ ENDIF |
| $ CC2 = CC + " /DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS |
| $ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS |
| $! |
| $! Show user the result |
| $! |
| $ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC |
| $! |
| $! Special Threads For OpenVMS v7.1 Or Later |
| $! |
| $! Written By: Richard Levitte |
| $! richard@levitte.org |
| $! |
| $! |
| $! Check To See If We Have A Option For P4. |
| $! |
| $ IF (P4.EQS."") |
| $ THEN |
| $! |
| $! Get The Version Of VMS We Are Using. |
| $! |
| $ ISSEVEN := |
| $ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) |
| $ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) |
| $! |
| $! Check To See If The VMS Version Is v7.1 Or Later. |
| $! |
| $ IF (TMP.GE.71) |
| $ THEN |
| $! |
| $! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. |
| $! |
| $ ISSEVEN := ,PTHREAD_USE_D4 |
| $! |
| $! End The VMS Version Check. |
| $! |
| $ ENDIF |
| $! |
| $! End The P4 Check. |
| $! |
| $ ENDIF |
| $! |
| $! Check if the user wanted to compile just a subset of all the programs. |
| $! |
| $ IF P5 .NES. "" |
| $ THEN |
| $ PROGRAMS = P5 |
| $ ENDIF |
| $! |
| $! Time To RETURN... |
| $! |
| $ RETURN |
| $! |
| $ INITIALISE: |
| $! |
| $! Save old value of the logical name OPENSSL |
| $! |
| $ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE") |
| $! |
| $! Save directory information |
| $! |
| $ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;" |
| $ __HERE = F$EDIT(__HERE,"UPCASE") |
| $ __TOP = __HERE - "APPS]" |
| $ __INCLUDE = __TOP + "INCLUDE.OPENSSL]" |
| $! |
| $! Set up the logical name OPENSSL to point at the include directory |
| $! |
| $ DEFINE OPENSSL /NOLOG '__INCLUDE' |
| $! |
| $! Done |
| $! |
| $ RETURN |
| $! |
| $ CLEANUP: |
| $! |
| $! Restore the saved logical name OPENSSL, if it had a value. |
| $! |
| $ if (f$type( __SAVE_OPENSSL) .nes. "") |
| $ then |
| $ IF __SAVE_OPENSSL .EQS. "" |
| $ THEN |
| $ DEASSIGN OPENSSL |
| $ ELSE |
| $ DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL' |
| $ ENDIF |
| $ endif |
| $! |
| $! Close any open files. |
| $! |
| $ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then - |
| close objects |
| $! |
| $! Done |
| $! |
| $ RETURN |
| $! |
