| // |
| // Copyright (C) 2002-2015 International Business Machines Corporation |
| // and others. All rights reserved. |
| // |
| // file: regeximp.h |
| // |
| // ICU Regular Expressions, |
| // Definitions of constant values used in the compiled form of |
| // a regular expression pattern. |
| // |
| |
| #ifndef _REGEXIMP_H |
| #define _REGEXIMP_H |
| |
| #include "unicode/utypes.h" |
| #include "unicode/uobject.h" |
| #include "unicode/uniset.h" |
| #include "unicode/utext.h" |
| |
| #include "cmemory.h" |
| #include "ucase.h" |
| |
| U_NAMESPACE_BEGIN |
| |
| // For debugging, define REGEX_DEBUG |
| // To define with configure, |
| // CPPFLAGS="-DREGEX_DEBUG" ./runConfigureICU --enable-debug --disable-release Linux |
| |
| #ifdef REGEX_DEBUG |
| // |
| // debugging options. Enable one or more of the three #defines immediately following |
| // |
| |
| //#define REGEX_SCAN_DEBUG |
| #define REGEX_DUMP_DEBUG |
| #define REGEX_RUN_DEBUG |
| |
| // End of #defines inteded to be directly set. |
| |
| #include <stdio.h> |
| #endif |
| |
| #ifdef REGEX_SCAN_DEBUG |
| #define REGEX_SCAN_DEBUG_PRINTF(a) printf a |
| #else |
| #define REGEX_SCAN_DEBUG_PRINTF(a) |
| #endif |
| |
| |
| // |
| // Opcode types In the compiled form of the regexp, these are the type, or opcodes, |
| // of the entries. |
| // |
| enum { |
| URX_RESERVED_OP = 0, // For multi-operand ops, most non-first words. |
| URX_RESERVED_OP_N = 255, // For multi-operand ops, negative operand values. |
| URX_BACKTRACK = 1, // Force a backtrack, as if a match test had failed. |
| URX_END = 2, |
| URX_ONECHAR = 3, // Value field is the 21 bit unicode char to match |
| URX_STRING = 4, // Value field is index of string start |
| URX_STRING_LEN = 5, // Value field is string length (code units) |
| URX_STATE_SAVE = 6, // Value field is pattern position to push |
| URX_NOP = 7, |
| URX_START_CAPTURE = 8, // Value field is capture group number. |
| URX_END_CAPTURE = 9, // Value field is capture group number |
| URX_STATIC_SETREF = 10, // Value field is index of set in array of sets. |
| URX_SETREF = 11, // Value field is index of set in array of sets. |
| URX_DOTANY = 12, |
| URX_JMP = 13, // Value field is destination position in |
| // the pattern. |
| URX_FAIL = 14, // Stop match operation, No match. |
| |
| URX_JMP_SAV = 15, // Operand: JMP destination location |
| URX_BACKSLASH_B = 16, // Value field: 0: \b 1: \B |
| URX_BACKSLASH_G = 17, |
| URX_JMP_SAV_X = 18, // Conditional JMP_SAV, |
| // Used in (x)+, breaks loop on zero length match. |
| // Operand: Jmp destination. |
| URX_BACKSLASH_X = 19, |
| URX_BACKSLASH_Z = 20, // \z Unconditional end of line. |
| |
| URX_DOTANY_ALL = 21, // ., in the . matches any mode. |
| URX_BACKSLASH_D = 22, // Value field: 0: \d 1: \D |
| URX_CARET = 23, // Value field: 1: multi-line mode. |
| URX_DOLLAR = 24, // Also for \Z |
| |
| URX_CTR_INIT = 25, // Counter Inits for {Interval} loops. |
| URX_CTR_INIT_NG = 26, // 2 kinds, normal and non-greedy. |
| // These are 4 word opcodes. See description. |
| // First Operand: Data loc of counter variable |
| // 2nd Operand: Pat loc of the URX_CTR_LOOPx |
| // at the end of the loop. |
| // 3rd Operand: Minimum count. |
| // 4th Operand: Max count, -1 for unbounded. |
| |
| URX_DOTANY_UNIX = 27, // '.' operator in UNIX_LINES mode, only \n marks end of line. |
| |
| URX_CTR_LOOP = 28, // Loop Ops for {interval} loops. |
| URX_CTR_LOOP_NG = 29, // Also in three flavors. |
| // Operand is loc of corresponding CTR_INIT. |
| |
| URX_CARET_M_UNIX = 30, // '^' operator, test for start of line in multi-line |
| // plus UNIX_LINES mode. |
| |
| URX_RELOC_OPRND = 31, // Operand value in multi-operand ops that refers |
| // back into compiled pattern code, and thus must |
| // be relocated when inserting/deleting ops in code. |
| |
| URX_STO_SP = 32, // Store the stack ptr. Operand is location within |
| // matcher data (not stack data) to store it. |
| URX_LD_SP = 33, // Load the stack pointer. Operand is location |
| // to load from. |
| URX_BACKREF = 34, // Back Reference. Parameter is the index of the |
| // capture group variables in the state stack frame. |
| URX_STO_INP_LOC = 35, // Store the input location. Operand is location |
| // within the matcher stack frame. |
| URX_JMPX = 36, // Conditional JMP. |
| // First Operand: JMP target location. |
| // Second Operand: Data location containing an |
| // input position. If current input position == |
| // saved input position, FAIL rather than taking |
| // the JMP |
| URX_LA_START = 37, // Starting a LookAround expression. |
| // Save InputPos and SP in static data. |
| // Operand: Static data offset for the save |
| URX_LA_END = 38, // Ending a Lookaround expression. |
| // Restore InputPos and Stack to saved values. |
| // Operand: Static data offset for saved data. |
| URX_ONECHAR_I = 39, // Test for case-insensitive match of a literal character. |
| // Operand: the literal char. |
| URX_STRING_I = 40, // Case insensitive string compare. |
| // First Operand: Index of start of string in string literals |
| // Second Operand (next word in compiled code): |
| // the length of the string. |
| URX_BACKREF_I = 41, // Case insensitive back reference. |
| // Parameter is the index of the |
| // capture group variables in the state stack frame. |
| URX_DOLLAR_M = 42, // $ in multi-line mode. |
| URX_CARET_M = 43, // ^ in multi-line mode. |
| URX_LB_START = 44, // LookBehind Start. |
| // Paramater is data location |
| URX_LB_CONT = 45, // LookBehind Continue. |
| // Param 0: the data location |
| // Param 1: The minimum length of the look-behind match |
| // Param 2: The max length of the look-behind match |
| URX_LB_END = 46, // LookBehind End. |
| // Parameter is the data location. |
| // Check that match ended at the right spot, |
| // Restore original input string len. |
| URX_LBN_CONT = 47, // Negative LookBehind Continue |
| // Param 0: the data location |
| // Param 1: The minimum length of the look-behind match |
| // Param 2: The max length of the look-behind match |
| // Param 3: The pattern loc following the look-behind block. |
| URX_LBN_END = 48, // Negative LookBehind end |
| // Parameter is the data location. |
| // Check that the match ended at the right spot. |
| URX_STAT_SETREF_N = 49, // Reference to a prebuilt set (e.g. \w), negated |
| // Operand is index of set in array of sets. |
| URX_LOOP_SR_I = 50, // Init a [set]* loop. |
| // Operand is the sets index in array of user sets. |
| URX_LOOP_C = 51, // Continue a [set]* or OneChar* loop. |
| // Operand is a matcher static data location. |
| // Must always immediately follow LOOP_x_I instruction. |
| URX_LOOP_DOT_I = 52, // .*, initialization of the optimized loop. |
| // Operand value: |
| // bit 0: |
| // 0: Normal (. doesn't match new-line) mode. |
| // 1: . matches new-line mode. |
| // bit 1: controls what new-lines are recognized by this operation. |
| // 0: All Unicode New-lines |
| // 1: UNIX_LINES, \u000a only. |
| URX_BACKSLASH_BU = 53, // \b or \B in UREGEX_UWORD mode, using Unicode style |
| // word boundaries. |
| URX_DOLLAR_D = 54, // $ end of input test, in UNIX_LINES mode. |
| URX_DOLLAR_MD = 55, // $ end of input test, in MULTI_LINE and UNIX_LINES mode. |
| URX_BACKSLASH_H = 56, // Value field: 0: \h 1: \H |
| URX_BACKSLASH_R = 57, // Any line break sequence. |
| URX_BACKSLASH_V = 58 // Value field: 0: \v 1: \V |
| |
| }; |
| |
| // Keep this list of opcode names in sync with the above enum |
| // Used for debug printing only. |
| #define URX_OPCODE_NAMES \ |
| " ", \ |
| "BACKTRACK", \ |
| "END", \ |
| "ONECHAR", \ |
| "STRING", \ |
| "STRING_LEN", \ |
| "STATE_SAVE", \ |
| "NOP", \ |
| "START_CAPTURE", \ |
| "END_CAPTURE", \ |
| "URX_STATIC_SETREF", \ |
| "SETREF", \ |
| "DOTANY", \ |
| "JMP", \ |
| "FAIL", \ |
| "JMP_SAV", \ |
| "BACKSLASH_B", \ |
| "BACKSLASH_G", \ |
| "JMP_SAV_X", \ |
| "BACKSLASH_X", \ |
| "BACKSLASH_Z", \ |
| "DOTANY_ALL", \ |
| "BACKSLASH_D", \ |
| "CARET", \ |
| "DOLLAR", \ |
| "CTR_INIT", \ |
| "CTR_INIT_NG", \ |
| "DOTANY_UNIX", \ |
| "CTR_LOOP", \ |
| "CTR_LOOP_NG", \ |
| "URX_CARET_M_UNIX", \ |
| "RELOC_OPRND", \ |
| "STO_SP", \ |
| "LD_SP", \ |
| "BACKREF", \ |
| "STO_INP_LOC", \ |
| "JMPX", \ |
| "LA_START", \ |
| "LA_END", \ |
| "ONECHAR_I", \ |
| "STRING_I", \ |
| "BACKREF_I", \ |
| "DOLLAR_M", \ |
| "CARET_M", \ |
| "LB_START", \ |
| "LB_CONT", \ |
| "LB_END", \ |
| "LBN_CONT", \ |
| "LBN_END", \ |
| "STAT_SETREF_N", \ |
| "LOOP_SR_I", \ |
| "LOOP_C", \ |
| "LOOP_DOT_I", \ |
| "BACKSLASH_BU", \ |
| "DOLLAR_D", \ |
| "DOLLAR_MD", \ |
| "URX_BACKSLASH_H", \ |
| "URX_BACKSLASH_R", \ |
| "URX_BACKSLASH_V" |
| |
| |
| // |
| // Convenience macros for assembling and disassembling a compiled operation. |
| // |
| #define URX_TYPE(x) ((uint32_t)(x) >> 24) |
| #define URX_VAL(x) ((x) & 0xffffff) |
| |
| |
| // |
| // Access to Unicode Sets composite character properties |
| // The sets are accessed by the match engine for things like \w (word boundary) |
| // |
| enum { |
| URX_ISWORD_SET = 1, |
| URX_ISALNUM_SET = 2, |
| URX_ISALPHA_SET = 3, |
| URX_ISSPACE_SET = 4, |
| |
| URX_GC_NORMAL, // Sets for finding grapheme cluster boundaries. |
| URX_GC_EXTEND, |
| URX_GC_CONTROL, |
| URX_GC_L, |
| URX_GC_LV, |
| URX_GC_LVT, |
| URX_GC_V, |
| URX_GC_T, |
| |
| URX_LAST_SET, |
| |
| URX_NEG_SET = 0x800000 // Flag bit to reverse sense of set |
| // membership test. |
| }; |
| |
| |
| // |
| // Match Engine State Stack Frame Layout. |
| // |
| struct REStackFrame { |
| // Header |
| int64_t fInputIdx; // Position of next character in the input string |
| int64_t fPatIdx; // Position of next Op in the compiled pattern |
| // (int64_t for UVector64, values fit in an int32_t) |
| // Remainder |
| int64_t fExtra[1]; // Extra state, for capture group start/ends |
| // atomic parentheses, repeat counts, etc. |
| // Locations assigned at pattern compile time. |
| // Variable-length array. |
| }; |
| // number of UVector elements in the header |
| #define RESTACKFRAME_HDRCOUNT 2 |
| |
| // |
| // Start-Of-Match type. Used by find() to quickly scan to positions where a |
| // match might start before firing up the full match engine. |
| // |
| enum StartOfMatch { |
| START_NO_INFO, // No hint available. |
| START_CHAR, // Match starts with a literal code point. |
| START_SET, // Match starts with something matching a set. |
| START_START, // Match starts at start of buffer only (^ or \A) |
| START_LINE, // Match starts with ^ in multi-line mode. |
| START_STRING // Match starts with a literal string. |
| }; |
| |
| #define START_OF_MATCH_STR(v) ((v)==START_NO_INFO? "START_NO_INFO" : \ |
| (v)==START_CHAR? "START_CHAR" : \ |
| (v)==START_SET? "START_SET" : \ |
| (v)==START_START? "START_START" : \ |
| (v)==START_LINE? "START_LINE" : \ |
| (v)==START_STRING? "START_STRING" : \ |
| "ILLEGAL") |
| |
| // |
| // 8 bit set, to fast-path latin-1 set membership tests. |
| // |
| struct Regex8BitSet : public UMemory { |
| inline Regex8BitSet(); |
| inline void operator = (const Regex8BitSet &s); |
| inline void init(const UnicodeSet *src); |
| inline UBool contains(UChar32 c); |
| inline void add(UChar32 c); |
| int8_t d[32]; |
| }; |
| |
| inline Regex8BitSet::Regex8BitSet() { |
| uprv_memset(d, 0, sizeof(d)); |
| } |
| |
| inline UBool Regex8BitSet::contains(UChar32 c) { |
| // No bounds checking! This is deliberate. |
| return ((d[c>>3] & 1 <<(c&7)) != 0); |
| } |
| |
| inline void Regex8BitSet::add(UChar32 c) { |
| d[c>>3] |= 1 << (c&7); |
| } |
| |
| inline void Regex8BitSet::init(const UnicodeSet *s) { |
| if (s != NULL) { |
| for (int32_t i=0; i<=255; i++) { |
| if (s->contains(i)) { |
| this->add(i); |
| } |
| } |
| } |
| } |
| |
| inline void Regex8BitSet::operator = (const Regex8BitSet &s) { |
| uprv_memcpy(d, s.d, sizeof(d)); |
| } |
| |
| |
| // Case folded UText Iterator helper class. |
| // Wraps a UText, provides a case-folded enumeration over its contents. |
| // Used in implementing case insensitive matching constructs. |
| // Implementation in rematch.cpp |
| |
| class CaseFoldingUTextIterator: public UMemory { |
| public: |
| CaseFoldingUTextIterator(UText &text); |
| ~CaseFoldingUTextIterator(); |
| |
| UChar32 next(); // Next case folded character |
| |
| UBool inExpansion(); // True if last char returned from next() and the |
| // next to be returned both originated from a string |
| // folding of the same code point from the orignal UText. |
| private: |
| UText &fUText; |
| const UCaseProps *fcsp; |
| const UChar *fFoldChars; |
| int32_t fFoldLength; |
| int32_t fFoldIndex; |
| |
| }; |
| |
| |
| // Case folded UChar * string iterator. |
| // Wraps a UChar *, provides a case-folded enumeration over its contents. |
| // Used in implementing case insensitive matching constructs. |
| // Implementation in rematch.cpp |
| |
| class CaseFoldingUCharIterator: public UMemory { |
| public: |
| CaseFoldingUCharIterator(const UChar *chars, int64_t start, int64_t limit); |
| ~CaseFoldingUCharIterator(); |
| |
| UChar32 next(); // Next case folded character |
| |
| UBool inExpansion(); // True if last char returned from next() and the |
| // next to be returned both originated from a string |
| // folding of the same code point from the orignal UText. |
| |
| int64_t getIndex(); // Return the current input buffer index. |
| |
| private: |
| const UChar *fChars; |
| int64_t fIndex; |
| int64_t fLimit; |
| const UCaseProps *fcsp; |
| const UChar *fFoldChars; |
| int32_t fFoldLength; |
| int32_t fFoldIndex; |
| |
| }; |
| |
| U_NAMESPACE_END |
| #endif |
| |
