| /* Copyright (c) 2017 Google Inc. |
| Written by Andrew Allen */ |
| /* |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| - Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| - Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER |
| OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file opus_projection.h |
| * @brief Opus projection reference API |
| */ |
| |
| #ifndef OPUS_PROJECTION_H |
| #define OPUS_PROJECTION_H |
| |
| #include "opus_multistream.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** @cond OPUS_INTERNAL_DOC */ |
| |
| /** These are the actual encoder and decoder CTL ID numbers. |
| * They should not be used directly by applications.c |
| * In general, SETs should be even and GETs should be odd.*/ |
| /**@{*/ |
| #define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST 6001 |
| #define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST 6003 |
| #define OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST 6005 |
| /**@}*/ |
| |
| |
| /** @endcond */ |
| |
| /** @defgroup opus_projection_ctls Projection specific encoder and decoder CTLs |
| * |
| * These are convenience macros that are specific to the |
| * opus_projection_encoder_ctl() and opus_projection_decoder_ctl() |
| * interface. |
| * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, |
| * @ref opus_decoderctls, and @ref opus_multistream_ctls may be applied to a |
| * projection encoder or decoder as well. |
| */ |
| /**@{*/ |
| |
| /** Gets the gain (in dB. S7.8-format) of the demixing matrix from the encoder. |
| * @param[out] x <tt>opus_int32 *</tt>: Returns the gain (in dB. S7.8-format) |
| * of the demixing matrix. |
| * @hideinitializer |
| */ |
| #define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST, __opus_check_int_ptr(x) |
| |
| |
| /** Gets the size in bytes of the demixing matrix from the encoder. |
| * @param[out] x <tt>opus_int32 *</tt>: Returns the size in bytes of the |
| * demixing matrix. |
| * @hideinitializer |
| */ |
| #define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST, __opus_check_int_ptr(x) |
| |
| |
| /** Copies the demixing matrix to the supplied pointer location. |
| * @param[out] x <tt>unsigned char *</tt>: Returns the demixing matrix to the |
| * supplied pointer location. |
| * @param y <tt>opus_int32</tt>: The size in bytes of the reserved memory at the |
| * pointer location. |
| * @hideinitializer |
| */ |
| #define OPUS_PROJECTION_GET_DEMIXING_MATRIX(x,y) OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST, x, __opus_check_int(y) |
| |
| |
| /**@}*/ |
| |
| /** Opus projection encoder state. |
| * This contains the complete state of a projection Opus encoder. |
| * It is position independent and can be freely copied. |
| * @see opus_projection_ambisonics_encoder_create |
| */ |
| typedef struct OpusProjectionEncoder OpusProjectionEncoder; |
| |
| |
| /** Opus projection decoder state. |
| * This contains the complete state of a projection Opus decoder. |
| * It is position independent and can be freely copied. |
| * @see opus_projection_decoder_create |
| * @see opus_projection_decoder_init |
| */ |
| typedef struct OpusProjectionDecoder OpusProjectionDecoder; |
| |
| |
| /**\name Projection encoder functions */ |
| /**@{*/ |
| |
| /** Gets the size of an OpusProjectionEncoder structure. |
| * @param channels <tt>int</tt>: The total number of input channels to encode. |
| * This must be no more than 255. |
| * @param mapping_family <tt>int</tt>: The mapping family to use for selecting |
| * the appropriate projection. |
| * @returns The size in bytes on success, or a negative error code |
| * (see @ref opus_errorcodes) on error. |
| */ |
| OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_ambisonics_encoder_get_size( |
| int channels, |
| int mapping_family |
| ); |
| |
| |
| /** Allocates and initializes a projection encoder state. |
| * Call opus_projection_encoder_destroy() to release |
| * this object when finished. |
| * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). |
| * This must be one of 8000, 12000, 16000, |
| * 24000, or 48000. |
| * @param channels <tt>int</tt>: Number of channels in the input signal. |
| * This must be at most 255. |
| * It may be greater than the number of |
| * coded channels (<code>streams + |
| * coupled_streams</code>). |
| * @param mapping_family <tt>int</tt>: The mapping family to use for selecting |
| * the appropriate projection. |
| * @param[out] streams <tt>int *</tt>: The total number of streams that will |
| * be encoded from the input. |
| * @param[out] coupled_streams <tt>int *</tt>: Number of coupled (2 channel) |
| * streams that will be encoded from the input. |
| * @param application <tt>int</tt>: The target encoder application. |
| * This must be one of the following: |
| * <dl> |
| * <dt>#OPUS_APPLICATION_VOIP</dt> |
| * <dd>Process signal for improved speech intelligibility.</dd> |
| * <dt>#OPUS_APPLICATION_AUDIO</dt> |
| * <dd>Favor faithfulness to the original input.</dd> |
| * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> |
| * <dd>Configure the minimum possible coding delay by disabling certain modes |
| * of operation.</dd> |
| * </dl> |
| * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error |
| * code (see @ref opus_errorcodes) on |
| * failure. |
| */ |
| OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionEncoder *opus_projection_ambisonics_encoder_create( |
| opus_int32 Fs, |
| int channels, |
| int mapping_family, |
| int *streams, |
| int *coupled_streams, |
| int application, |
| int *error |
| ) OPUS_ARG_NONNULL(4) OPUS_ARG_NONNULL(5); |
| |
| |
| /** Initialize a previously allocated projection encoder state. |
| * The memory pointed to by \a st must be at least the size returned by |
| * opus_projection_ambisonics_encoder_get_size(). |
| * This is intended for applications which use their own allocator instead of |
| * malloc. |
| * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. |
| * @see opus_projection_ambisonics_encoder_create |
| * @see opus_projection_ambisonics_encoder_get_size |
| * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to initialize. |
| * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz). |
| * This must be one of 8000, 12000, 16000, |
| * 24000, or 48000. |
| * @param channels <tt>int</tt>: Number of channels in the input signal. |
| * This must be at most 255. |
| * It may be greater than the number of |
| * coded channels (<code>streams + |
| * coupled_streams</code>). |
| * @param streams <tt>int</tt>: The total number of streams to encode from the |
| * input. |
| * This must be no more than the number of channels. |
| * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams |
| * to encode. |
| * This must be no larger than the total |
| * number of streams. |
| * Additionally, The total number of |
| * encoded channels (<code>streams + |
| * coupled_streams</code>) must be no |
| * more than the number of input channels. |
| * @param application <tt>int</tt>: The target encoder application. |
| * This must be one of the following: |
| * <dl> |
| * <dt>#OPUS_APPLICATION_VOIP</dt> |
| * <dd>Process signal for improved speech intelligibility.</dd> |
| * <dt>#OPUS_APPLICATION_AUDIO</dt> |
| * <dd>Favor faithfulness to the original input.</dd> |
| * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt> |
| * <dd>Configure the minimum possible coding delay by disabling certain modes |
| * of operation.</dd> |
| * </dl> |
| * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) |
| * on failure. |
| */ |
| OPUS_EXPORT int opus_projection_ambisonics_encoder_init( |
| OpusProjectionEncoder *st, |
| opus_int32 Fs, |
| int channels, |
| int mapping_family, |
| int *streams, |
| int *coupled_streams, |
| int application |
| ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6); |
| |
| |
| /** Encodes a projection Opus frame. |
| * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. |
| * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved |
| * samples. |
| * This must contain |
| * <code>frame_size*channels</code> |
| * samples. |
| * @param frame_size <tt>int</tt>: Number of samples per channel in the input |
| * signal. |
| * This must be an Opus frame size for the |
| * encoder's sampling rate. |
| * For example, at 48 kHz the permitted values |
| * are 120, 240, 480, 960, 1920, and 2880. |
| * Passing in a duration of less than 10 ms |
| * (480 samples at 48 kHz) will prevent the |
| * encoder from using the LPC or hybrid modes. |
| * @param[out] data <tt>unsigned char*</tt>: Output payload. |
| * This must contain storage for at |
| * least \a max_data_bytes. |
| * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated |
| * memory for the output |
| * payload. This may be |
| * used to impose an upper limit on |
| * the instant bitrate, but should |
| * not be used as the only bitrate |
| * control. Use #OPUS_SET_BITRATE to |
| * control the bitrate. |
| * @returns The length of the encoded packet (in bytes) on success or a |
| * negative error code (see @ref opus_errorcodes) on failure. |
| */ |
| OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode( |
| OpusProjectionEncoder *st, |
| const opus_int16 *pcm, |
| int frame_size, |
| unsigned char *data, |
| opus_int32 max_data_bytes |
| ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); |
| |
| |
| /** Encodes a projection Opus frame from floating point input. |
| * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. |
| * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved |
| * samples with a normal range of |
| * +/-1.0. |
| * Samples with a range beyond +/-1.0 |
| * are supported but will be clipped by |
| * decoders using the integer API and |
| * should only be used if it is known |
| * that the far end supports extended |
| * dynamic range. |
| * This must contain |
| * <code>frame_size*channels</code> |
| * samples. |
| * @param frame_size <tt>int</tt>: Number of samples per channel in the input |
| * signal. |
| * This must be an Opus frame size for the |
| * encoder's sampling rate. |
| * For example, at 48 kHz the permitted values |
| * are 120, 240, 480, 960, 1920, and 2880. |
| * Passing in a duration of less than 10 ms |
| * (480 samples at 48 kHz) will prevent the |
| * encoder from using the LPC or hybrid modes. |
| * @param[out] data <tt>unsigned char*</tt>: Output payload. |
| * This must contain storage for at |
| * least \a max_data_bytes. |
| * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated |
| * memory for the output |
| * payload. This may be |
| * used to impose an upper limit on |
| * the instant bitrate, but should |
| * not be used as the only bitrate |
| * control. Use #OPUS_SET_BITRATE to |
| * control the bitrate. |
| * @returns The length of the encoded packet (in bytes) on success or a |
| * negative error code (see @ref opus_errorcodes) on failure. |
| */ |
| OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode_float( |
| OpusProjectionEncoder *st, |
| const float *pcm, |
| int frame_size, |
| unsigned char *data, |
| opus_int32 max_data_bytes |
| ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); |
| |
| |
| /** Frees an <code>OpusProjectionEncoder</code> allocated by |
| * opus_projection_ambisonics_encoder_create(). |
| * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to be freed. |
| */ |
| OPUS_EXPORT void opus_projection_encoder_destroy(OpusProjectionEncoder *st); |
| |
| |
| /** Perform a CTL function on a projection Opus encoder. |
| * |
| * Generally the request and subsequent arguments are generated by a |
| * convenience macro. |
| * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state. |
| * @param request This and all remaining parameters should be replaced by one |
| * of the convenience macros in @ref opus_genericctls, |
| * @ref opus_encoderctls, @ref opus_multistream_ctls, or |
| * @ref opus_projection_ctls |
| * @see opus_genericctls |
| * @see opus_encoderctls |
| * @see opus_multistream_ctls |
| * @see opus_projection_ctls |
| */ |
| OPUS_EXPORT int opus_projection_encoder_ctl(OpusProjectionEncoder *st, int request, ...) OPUS_ARG_NONNULL(1); |
| |
| |
| /**@}*/ |
| |
| /**\name Projection decoder functions */ |
| /**@{*/ |
| |
| /** Gets the size of an <code>OpusProjectionDecoder</code> structure. |
| * @param channels <tt>int</tt>: The total number of output channels. |
| * This must be no more than 255. |
| * @param streams <tt>int</tt>: The total number of streams coded in the |
| * input. |
| * This must be no more than 255. |
| * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled |
| * (2 channel) streams. |
| * This must be no larger than the total |
| * number of streams. |
| * Additionally, The total number of |
| * coded channels (<code>streams + |
| * coupled_streams</code>) must be no |
| * more than 255. |
| * @returns The size in bytes on success, or a negative error code |
| * (see @ref opus_errorcodes) on error. |
| */ |
| OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_decoder_get_size( |
| int channels, |
| int streams, |
| int coupled_streams |
| ); |
| |
| |
| /** Allocates and initializes a projection decoder state. |
| * Call opus_projection_decoder_destroy() to release |
| * this object when finished. |
| * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). |
| * This must be one of 8000, 12000, 16000, |
| * 24000, or 48000. |
| * @param channels <tt>int</tt>: Number of channels to output. |
| * This must be at most 255. |
| * It may be different from the number of coded |
| * channels (<code>streams + |
| * coupled_streams</code>). |
| * @param streams <tt>int</tt>: The total number of streams coded in the |
| * input. |
| * This must be no more than 255. |
| * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled |
| * (2 channel) streams. |
| * This must be no larger than the total |
| * number of streams. |
| * Additionally, The total number of |
| * coded channels (<code>streams + |
| * coupled_streams</code>) must be no |
| * more than 255. |
| * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix |
| * that mapping from coded channels to output channels, |
| * as described in @ref opus_projection and |
| * @ref opus_projection_ctls. |
| * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the |
| * demixing matrix, as |
| * described in @ref |
| * opus_projection_ctls. |
| * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error |
| * code (see @ref opus_errorcodes) on |
| * failure. |
| */ |
| OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionDecoder *opus_projection_decoder_create( |
| opus_int32 Fs, |
| int channels, |
| int streams, |
| int coupled_streams, |
| unsigned char *demixing_matrix, |
| opus_int32 demixing_matrix_size, |
| int *error |
| ) OPUS_ARG_NONNULL(5); |
| |
| |
| /** Intialize a previously allocated projection decoder state object. |
| * The memory pointed to by \a st must be at least the size returned by |
| * opus_projection_decoder_get_size(). |
| * This is intended for applications which use their own allocator instead of |
| * malloc. |
| * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL. |
| * @see opus_projection_decoder_create |
| * @see opus_projection_deocder_get_size |
| * @param st <tt>OpusProjectionDecoder*</tt>: Projection encoder state to initialize. |
| * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz). |
| * This must be one of 8000, 12000, 16000, |
| * 24000, or 48000. |
| * @param channels <tt>int</tt>: Number of channels to output. |
| * This must be at most 255. |
| * It may be different from the number of coded |
| * channels (<code>streams + |
| * coupled_streams</code>). |
| * @param streams <tt>int</tt>: The total number of streams coded in the |
| * input. |
| * This must be no more than 255. |
| * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled |
| * (2 channel) streams. |
| * This must be no larger than the total |
| * number of streams. |
| * Additionally, The total number of |
| * coded channels (<code>streams + |
| * coupled_streams</code>) must be no |
| * more than 255. |
| * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix |
| * that mapping from coded channels to output channels, |
| * as described in @ref opus_projection and |
| * @ref opus_projection_ctls. |
| * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the |
| * demixing matrix, as |
| * described in @ref |
| * opus_projection_ctls. |
| * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes) |
| * on failure. |
| */ |
| OPUS_EXPORT int opus_projection_decoder_init( |
| OpusProjectionDecoder *st, |
| opus_int32 Fs, |
| int channels, |
| int streams, |
| int coupled_streams, |
| unsigned char *demixing_matrix, |
| opus_int32 demixing_matrix_size |
| ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6); |
| |
| |
| /** Decode a projection Opus packet. |
| * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. |
| * @param[in] data <tt>const unsigned char*</tt>: Input payload. |
| * Use a <code>NULL</code> |
| * pointer to indicate packet |
| * loss. |
| * @param len <tt>opus_int32</tt>: Number of bytes in payload. |
| * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved |
| * samples. |
| * This must contain room for |
| * <code>frame_size*channels</code> |
| * samples. |
| * @param frame_size <tt>int</tt>: The number of samples per channel of |
| * available space in \a pcm. |
| * If this is less than the maximum packet duration |
| * (120 ms; 5760 for 48kHz), this function will not be capable |
| * of decoding some packets. In the case of PLC (data==NULL) |
| * or FEC (decode_fec=1), then frame_size needs to be exactly |
| * the duration of audio that is missing, otherwise the |
| * decoder will not be in the optimal state to decode the |
| * next incoming packet. For the PLC and FEC cases, frame_size |
| * <b>must</b> be a multiple of 2.5 ms. |
| * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band |
| * forward error correction data be decoded. |
| * If no such data is available, the frame is |
| * decoded as if it were lost. |
| * @returns Number of samples decoded on success or a negative error code |
| * (see @ref opus_errorcodes) on failure. |
| */ |
| OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode( |
| OpusProjectionDecoder *st, |
| const unsigned char *data, |
| opus_int32 len, |
| opus_int16 *pcm, |
| int frame_size, |
| int decode_fec |
| ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); |
| |
| |
| /** Decode a projection Opus packet with floating point output. |
| * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. |
| * @param[in] data <tt>const unsigned char*</tt>: Input payload. |
| * Use a <code>NULL</code> |
| * pointer to indicate packet |
| * loss. |
| * @param len <tt>opus_int32</tt>: Number of bytes in payload. |
| * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved |
| * samples. |
| * This must contain room for |
| * <code>frame_size*channels</code> |
| * samples. |
| * @param frame_size <tt>int</tt>: The number of samples per channel of |
| * available space in \a pcm. |
| * If this is less than the maximum packet duration |
| * (120 ms; 5760 for 48kHz), this function will not be capable |
| * of decoding some packets. In the case of PLC (data==NULL) |
| * or FEC (decode_fec=1), then frame_size needs to be exactly |
| * the duration of audio that is missing, otherwise the |
| * decoder will not be in the optimal state to decode the |
| * next incoming packet. For the PLC and FEC cases, frame_size |
| * <b>must</b> be a multiple of 2.5 ms. |
| * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band |
| * forward error correction data be decoded. |
| * If no such data is available, the frame is |
| * decoded as if it were lost. |
| * @returns Number of samples decoded on success or a negative error code |
| * (see @ref opus_errorcodes) on failure. |
| */ |
| OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode_float( |
| OpusProjectionDecoder *st, |
| const unsigned char *data, |
| opus_int32 len, |
| float *pcm, |
| int frame_size, |
| int decode_fec |
| ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); |
| |
| |
| /** Perform a CTL function on a projection Opus decoder. |
| * |
| * Generally the request and subsequent arguments are generated by a |
| * convenience macro. |
| * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state. |
| * @param request This and all remaining parameters should be replaced by one |
| * of the convenience macros in @ref opus_genericctls, |
| * @ref opus_decoderctls, @ref opus_multistream_ctls, or |
| * @ref opus_projection_ctls. |
| * @see opus_genericctls |
| * @see opus_decoderctls |
| * @see opus_multistream_ctls |
| * @see opus_projection_ctls |
| */ |
| OPUS_EXPORT int opus_projection_decoder_ctl(OpusProjectionDecoder *st, int request, ...) OPUS_ARG_NONNULL(1); |
| |
| |
| /** Frees an <code>OpusProjectionDecoder</code> allocated by |
| * opus_projection_decoder_create(). |
| * @param st <tt>OpusProjectionDecoder</tt>: Projection decoder state to be freed. |
| */ |
| OPUS_EXPORT void opus_projection_decoder_destroy(OpusProjectionDecoder *st); |
| |
| |
| /**@}*/ |
| |
| /**@}*/ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* OPUS_PROJECTION_H */ |
