blob: 6de4273500a95a3f5e5144536dc7e1ba85f95efc [file] [log] [blame]
#!/bin/bash
#
# Copyright (c) 2012 The Chromium Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
#
# A generic script used to attach to a running Chromium process and
# debug it. Most users should not use this directly, but one of the
# wrapper scripts like adb_gdb_content_shell
#
# Use --help to print full usage instructions.
#
PROGNAME=$(basename "$0")
PROGDIR=$(dirname "$0")
# Force locale to C to allow recognizing output from subprocesses.
LC_ALL=C
# Location of Chromium-top-level sources.
CHROMIUM_SRC=$(cd "$PROGDIR"/../.. >/dev/null && pwd 2>/dev/null)
TMPDIR=
GDBSERVER_PIDFILE=
TARGET_GDBSERVER=
COMMAND_PREFIX=
COMMAND_SUFFIX=
clean_exit () {
if [ "$TMPDIR" ]; then
GDBSERVER_PID=$(cat $GDBSERVER_PIDFILE 2>/dev/null)
if [ "$GDBSERVER_PID" ]; then
log "Killing background gdbserver process: $GDBSERVER_PID"
kill -9 $GDBSERVER_PID >/dev/null 2>&1
rm -f "$GDBSERVER_PIDFILE"
fi
if [ "$TARGET_GDBSERVER" ]; then
log "Removing target gdbserver binary: $TARGET_GDBSERVER."
"$ADB" shell "$COMMAND_PREFIX" rm "$TARGET_GDBSERVER" \
"$TARGET_DOMAIN_SOCKET" "$COMMAND_SUFFIX" >/dev/null 2>&1
fi
log "Cleaning up: $TMPDIR"
rm -rf "$TMPDIR"
fi
trap "" EXIT
exit $1
}
# Ensure clean exit on Ctrl-C or normal exit.
trap "clean_exit 1" INT HUP QUIT TERM
trap "clean_exit \$?" EXIT
panic () {
echo "ERROR: $@" >&2
exit 1
}
fail_panic () {
if [ $? != 0 ]; then panic "$@"; fi
}
log () {
if [ "$VERBOSE" -gt 0 ]; then
echo "$@"
fi
}
DEFAULT_PULL_LIBS_DIR="/tmp/adb-gdb-support-$USER"
IDE_DIR="$DEFAULT_PULL_LIBS_DIR"
# NOTE: Allow wrapper scripts to set various default through ADB_GDB_XXX
# environment variables. This is only for cosmetic reasons, i.e. to
# display proper
# Allow wrapper scripts to set the program name through ADB_GDB_PROGNAME
PROGNAME=${ADB_GDB_PROGNAME:-$(basename "$0")}
ADB=
ANNOTATE=
CGDB=
GDBINIT=
GDBSERVER=
HELP=
IDE=
NDK_DIR=
NO_PULL_LIBS=
PACKAGE_NAME=
PID=
PORT=
PROGRAM_NAME="activity"
PULL_LIBS=
PULL_LIBS_DIR=
ATTACH_DELAY=1
SU_PREFIX=
SYMBOL_DIR=
TARGET_ARCH=
TOOLCHAIN=
VERBOSE=0
for opt; do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case $opt in
--adb=*)
ADB=$optarg
;;
--device=*)
export ANDROID_SERIAL=$optarg
;;
--annotate=3)
ANNOTATE=$optarg
;;
--gdbserver=*)
GDBSERVER=$optarg
;;
--gdb=*)
GDB=$optarg
;;
--help|-h|-?)
HELP=true
;;
--ide)
IDE=true
;;
--ndk-dir=*)
NDK_DIR=$optarg
;;
--no-pull-libs)
NO_PULL_LIBS=true
;;
--package-name=*)
PACKAGE_NAME=$optarg
;;
--pid=*)
PID=$optarg
;;
--port=*)
PORT=$optarg
;;
--program-name=*)
PROGRAM_NAME=$optarg
;;
--pull-libs)
PULL_LIBS=true
;;
--pull-libs-dir=*)
PULL_LIBS_DIR=$optarg
;;
--script=*)
GDBINIT=$optarg
;;
--attach-delay=*)
ATTACH_DELAY=$optarg
;;
--su-prefix=*)
SU_PREFIX=$optarg
;;
--symbol-dir=*)
SYMBOL_DIR=$optarg
;;
--output-directory=*)
CHROMIUM_OUTPUT_DIR=$optarg
;;
--target-arch=*)
TARGET_ARCH=$optarg
;;
--toolchain=*)
TOOLCHAIN=$optarg
;;
--cgdb)
CGDB=cgdb
;;
--cgdb=*)
CGDB=$optarg
;;
--verbose)
VERBOSE=$(( $VERBOSE + 1 ))
;;
-*)
panic "Unknown option $opt, see --help." >&2
;;
*)
if [ "$PACKAGE_NAME" ]; then
panic "You can only provide a single package name as argument!\
See --help."
fi
PACKAGE_NAME=$opt
;;
esac
done
if [ "$HELP" ]; then
if [ "$ADB_GDB_PROGNAME" ]; then
# Assume wrapper scripts all provide a default package name.
cat <<EOF
Usage: $PROGNAME [options]
Attach gdb to a running Android $PROGRAM_NAME process.
EOF
else
# Assume this is a direct call to adb_gdb
cat <<EOF
Usage: $PROGNAME [options] [<package-name>]
Attach gdb to a running Android $PROGRAM_NAME process.
If provided, <package-name> must be the name of the Android application's
package name to be debugged. You can also use --package-name=<name> to
specify it.
EOF
fi
cat <<EOF
This script is used to debug a running $PROGRAM_NAME process.
This script needs several things to work properly. It will try to pick
them up automatically for you though:
- target gdbserver binary
- host gdb client (e.g. arm-linux-androideabi-gdb)
- directory with symbolic version of $PROGRAM_NAME's shared libraries.
You can also use --ndk-dir=<path> to specify an alternative NDK installation
directory.
The script tries to find the most recent version of the debug version of
shared libraries under one of the following directories:
\$CHROMIUM_SRC/<out>/lib/ (used by GYP builds)
\$CHROMIUM_SRC/<out>/lib.unstripped/ (used by GN builds)
Where <out> is determined by CHROMIUM_OUTPUT_DIR, or --output-directory.
You can set the path manually via --symbol-dir.
The script tries to extract the target architecture from your target device,
but if this fails, will default to 'arm'. Use --target-arch=<name> to force
its value.
Otherwise, the script will complain, but you can use the --gdbserver,
--gdb and --symbol-lib options to specify everything manually.
An alternative to --gdb=<file> is to use --toollchain=<path> to specify
the path to the host target-specific cross-toolchain.
You will also need the 'adb' tool in your path. Otherwise, use the --adb
option. The script will complain if there is more than one device connected
and a device is not specified with either --device or ANDROID_SERIAL).
The first time you use it on a device, the script will pull many system
libraries required by the process into a temporary directory. This
is done to strongly improve the debugging experience, like allowing
readable thread stacks and more. The libraries are copied to the following
directory by default:
$DEFAULT_PULL_LIBS_DIR/
But you can use the --pull-libs-dir=<path> option to specify an
alternative. The script can detect when you change the connected device,
and will re-pull the libraries only in this case. You can however force it
with the --pull-libs option.
Any local .gdbinit script will be ignored, but it is possible to pass a
gdb command script with the --script=<file> option. Note that its commands
will be passed to gdb after the remote connection and library symbol
loading have completed.
Valid options:
--help|-h|-? Print this message.
--verbose Increase verbosity.
--cgdb[=<file>] Use cgdb (an interface for gdb that shows the code).
--symbol-dir=<path> Specify directory with symbol shared libraries.
--output-directory=<path> Specify the output directory (e.g. "out/Debug").
--package-name=<name> Specify package name (alternative to 1st argument).
--program-name=<name> Specify program name (cosmetic only).
--pid=<pid> Specify application process pid.
--attach-delay=<num> Seconds to wait for gdbserver to attach to the
remote process before starting gdb. Default 1.
<num> may be a float if your sleep(1) supports it.
--annotate=<num> Enable gdb annotation.
--script=<file> Specify extra GDB init script.
--gdbserver=<file> Specify target gdbserver binary.
--gdb=<file> Specify host gdb client binary.
--target-arch=<name> Specify NDK target arch.
--adb=<file> Specify host ADB binary.
--device=<file> ADB device serial to use (-s flag).
--port=<port> Specify the tcp port to use.
--ide Forward gdb port, but do not enter gdb console.
--su-prefix=<prefix> Prepend <prefix> to 'adb shell' commands that are
run by this script. This can be useful to use
the 'su' program on rooted production devices.
e.g. --su-prefix="su -c"
--pull-libs Force system libraries extraction.
--no-pull-libs Do not extract any system library.
--libs-dir=<path> Specify system libraries extraction directory.
EOF
exit 0
fi
if [ -z "$PACKAGE_NAME" ]; then
panic "Please specify a package name on the command line. See --help."
fi
if [[ -z "$SYMBOL_DIR" && -z "$CHROMIUM_OUTPUT_DIR" ]]; then
if [[ -e "build.ninja" ]]; then
CHROMIUM_OUTPUT_DIR=$PWD
else
panic "Please specify an output directory by using one of:
--output-directory=out/Debug
CHROMIUM_OUTPUT_DIR=out/Debug
Setting working directory to an output directory.
See --help."
fi
fi
if ls *.so >/dev/null 2>&1; then
panic ".so files found in your working directory. These will conflict with" \
"library lookup logic. Change your working directory and try again."
fi
# Detect the build type and symbol directory. This is done by finding
# the most recent sub-directory containing debug shared libraries under
# $CHROMIUM_OUTPUT_DIR.
#
# Out: nothing, but this sets SYMBOL_DIR
#
detect_symbol_dir () {
# GYP places unstripped libraries under out/lib
# GN places them under out/lib.unstripped
local PARENT_DIR="$CHROMIUM_OUTPUT_DIR"
if [[ ! -e "$PARENT_DIR" ]]; then
PARENT_DIR="$CHROMIUM_SRC/$PARENT_DIR"
fi
SYMBOL_DIR="$PARENT_DIR/lib.unstripped"
if [[ -z "$(ls "$SYMBOL_DIR"/lib*.so 2>/dev/null)" ]]; then
SYMBOL_DIR="$PARENT_DIR/lib"
if [[ -z "$(ls "$SYMBOL_DIR"/lib*.so 2>/dev/null)" ]]; then
panic "Could not find any symbols under \
$PARENT_DIR/lib{.unstripped}. Please build the program first!"
fi
fi
log "Auto-config: --symbol-dir=$SYMBOL_DIR"
}
if [ -z "$SYMBOL_DIR" ]; then
detect_symbol_dir
elif [[ -z "$(ls "$SYMBOL_DIR"/lib*.so 2>/dev/null)" ]]; then
panic "Could not find any symbols under $SYMBOL_DIR"
fi
if [ -z "$NDK_DIR" ]; then
ANDROID_NDK_ROOT=$(PYTHONPATH=$CHROMIUM_SRC/build/android python -c \
'from pylib.constants import ANDROID_NDK_ROOT; print ANDROID_NDK_ROOT,')
else
if [ ! -d "$NDK_DIR" ]; then
panic "Invalid directory: $NDK_DIR"
fi
if [ ! -f "$NDK_DIR/ndk-build" ]; then
panic "Not a valid NDK directory: $NDK_DIR"
fi
ANDROID_NDK_ROOT=$NDK_DIR
fi
if [ "$GDBINIT" -a ! -f "$GDBINIT" ]; then
panic "Unknown --script file: $GDBINIT"
fi
# Check that ADB is in our path
if [ -z "$ADB" ]; then
ADB=$(which adb 2>/dev/null)
if [ -z "$ADB" ]; then
panic "Can't find 'adb' tool in your path. Install it or use \
--adb=<file>"
fi
log "Auto-config: --adb=$ADB"
fi
# Check that it works minimally
ADB_VERSION=$($ADB version 2>/dev/null)
echo "$ADB_VERSION" | fgrep -q -e "Android Debug Bridge"
if [ $? != 0 ]; then
panic "Your 'adb' tool seems invalid, use --adb=<file> to specify a \
different one: $ADB"
fi
# If there are more than one device connected, and ANDROID_SERIAL is not
# defined, print an error message.
NUM_DEVICES_PLUS2=$($ADB devices 2>/dev/null | wc -l)
if [ "$NUM_DEVICES_PLUS2" -gt 3 -a -z "$ANDROID_SERIAL" ]; then
echo "ERROR: There is more than one Android device connected to ADB."
echo "Please define ANDROID_SERIAL to specify which one to use."
exit 1
fi
# Run a command through adb shell, strip the extra \r from the output
# and return the correct status code to detect failures. This assumes
# that the adb shell command prints a final \n to stdout.
# $1+: command to run
# Out: command's stdout
# Return: command's status
# Note: the command's stderr is lost
adb_shell () {
local TMPOUT="$(mktemp)"
local LASTLINE RET
local ADB=${ADB:-adb}
# The weird sed rule is to strip the final \r on each output line
# Since 'adb shell' never returns the command's proper exit/status code,
# we force it to print it as '%%<status>' in the temporary output file,
# which we will later strip from it.
$ADB shell $@ ";" echo "%%\$?" 2>/dev/null | \
sed -e 's![[:cntrl:]]!!g' > $TMPOUT
# Get last line in log, which contains the exit code from the command
LASTLINE=$(sed -e '$!d' $TMPOUT)
# Extract the status code from the end of the line, which must
# be '%%<code>'.
RET=$(echo "$LASTLINE" | \
awk '{ if (match($0, "%%[0-9]+$")) { print substr($0,RSTART+2); } }')
# Remove the status code from the last line. Note that this may result
# in an empty line.
LASTLINE=$(echo "$LASTLINE" | \
awk '{ if (match($0, "%%[0-9]+$")) { print substr($0,1,RSTART-1); } }')
# The output itself: all lines except the status code.
sed -e '$d' $TMPOUT && printf "%s" "$LASTLINE"
# Remove temp file.
rm -f $TMPOUT
# Exit with the appropriate status.
return $RET
}
# Find the target architecture from a local shared library.
# This returns an NDK-compatible architecture name.
# out: NDK Architecture name, or empty string.
get_gyp_target_arch () {
# ls prints a broken pipe error when there are a lot of libs.
local RANDOM_LIB=$(ls "$SYMBOL_DIR"/lib*.so 2>/dev/null| head -n1)
local SO_DESC=$(file $RANDOM_LIB)
case $ARCH in
*32-bit*ARM,*) echo "arm";;
*64-bit*ARM,*) echo "arm64";;
*32-bit*Intel,*) echo "x86";;
*x86-64,*) echo "x86_64";;
*32-bit*MIPS,*) echo "mips";;
*) echo "";
esac
}
if [ -z "$TARGET_ARCH" ]; then
TARGET_ARCH=$(get_gyp_target_arch)
if [ -z "$TARGET_ARCH" ]; then
TARGET_ARCH=arm
fi
else
# Nit: accept Chromium's 'ia32' as a valid target architecture. This
# script prefers the NDK 'x86' name instead because it uses it to find
# NDK-specific files (host gdb) with it.
if [ "$TARGET_ARCH" = "ia32" ]; then
TARGET_ARCH=x86
log "Auto-config: --arch=$TARGET_ARCH (equivalent to ia32)"
fi
fi
# Detect the NDK system name, i.e. the name used to identify the host.
# out: NDK system name (e.g. 'linux' or 'darwin')
get_ndk_host_system () {
local HOST_OS
if [ -z "$NDK_HOST_SYSTEM" ]; then
HOST_OS=$(uname -s)
case $HOST_OS in
Linux) NDK_HOST_SYSTEM=linux;;
Darwin) NDK_HOST_SYSTEM=darwin;;
*) panic "You can't run this script on this system: $HOST_OS";;
esac
fi
echo "$NDK_HOST_SYSTEM"
}
# Detect the NDK host architecture name.
# out: NDK arch name (e.g. 'x86' or 'x86_64')
get_ndk_host_arch () {
local HOST_ARCH HOST_OS
if [ -z "$NDK_HOST_ARCH" ]; then
HOST_OS=$(get_ndk_host_system)
HOST_ARCH=$(uname -p)
if [ "$HOST_ARCH" = "unknown" ]; then
# In case where "-p" returns "unknown" just use "-m" (machine hardware
# name). According to this patch from Fedora "-p" is equivalent to "-m"
# anyway: https://goo.gl/Pd47x3
HOST_ARCH=$(uname -m)
fi
case $HOST_ARCH in
i?86) NDK_HOST_ARCH=x86;;
x86_64|amd64) NDK_HOST_ARCH=x86_64;;
*) panic "You can't run this script on this host architecture: $HOST_ARCH";;
esac
# Darwin trick: "uname -p" always returns i386 on 64-bit installations.
if [ "$HOST_OS" = darwin -a "$NDK_HOST_ARCH" = "x86" ]; then
# Use '/usr/bin/file', not just 'file' to avoid buggy MacPorts
# implementations of the tool. See http://b.android.com/53769
HOST_64BITS=$(/usr/bin/file -L "$SHELL" | grep -e "x86[_-]64")
if [ "$HOST_64BITS" ]; then
NDK_HOST_ARCH=x86_64
fi
fi
fi
echo "$NDK_HOST_ARCH"
}
# Convert an NDK architecture name into a GNU configure triplet.
# $1: NDK architecture name (e.g. 'arm')
# Out: Android GNU configure triplet (e.g. 'arm-linux-androideabi')
get_arch_gnu_config () {
case $1 in
arm)
echo "arm-linux-androideabi"
;;
arm64)
echo "aarch64-linux-android"
;;
x86)
echo "i686-linux-android"
;;
x86_64)
echo "x86_64-linux-android"
;;
mips)
echo "mipsel-linux-android"
;;
*)
echo "$ARCH-linux-android"
;;
esac
}
# Convert an NDK architecture name into a toolchain name prefix
# $1: NDK architecture name (e.g. 'arm')
# Out: NDK toolchain name prefix (e.g. 'arm-linux-androideabi')
get_arch_toolchain_prefix () {
# Return the configure triplet, except for x86 and x86_64!
if [ "$1" = "x86" -o "$1" = "x86_64" ]; then
echo "$1"
else
get_arch_gnu_config $1
fi
}
# Find a NDK toolchain prebuilt file or sub-directory.
# This will probe the various arch-specific toolchain directories
# in the NDK for the needed file.
# $1: NDK install path
# $2: NDK architecture name
# $3: prebuilt sub-path to look for.
# Out: file path, or empty if none is found.
get_ndk_toolchain_prebuilt () {
local NDK_DIR="${1%/}"
local ARCH="$2"
local SUBPATH="$3"
local NAME="$(get_arch_toolchain_prefix $ARCH)"
local FILE TARGET
FILE=$NDK_DIR/toolchains/$NAME-4.9/prebuilt/$SUBPATH
if [ ! -f "$FILE" ]; then
FILE=$NDK_DIR/toolchains/$NAME-4.8/prebuilt/$SUBPATH
if [ ! -f "$FILE" ]; then
FILE=
fi
fi
echo "$FILE"
}
# Find the path to an NDK's toolchain full prefix for a given architecture
# $1: NDK install path
# $2: NDK target architecture name
# Out: install path + binary prefix (e.g.
# ".../path/to/bin/arm-linux-androideabi-")
get_ndk_toolchain_fullprefix () {
local NDK_DIR="$1"
local ARCH="$2"
local TARGET NAME HOST_OS HOST_ARCH LD CONFIG
# NOTE: This will need to be updated if the NDK changes the names or moves
# the location of its prebuilt toolchains.
#
LD=
HOST_OS=$(get_ndk_host_system)
HOST_ARCH=$(get_ndk_host_arch)
CONFIG=$(get_arch_gnu_config $ARCH)
LD=$(get_ndk_toolchain_prebuilt \
"$NDK_DIR" "$ARCH" "$HOST_OS-$HOST_ARCH/bin/$CONFIG-ld")
if [ -z "$LD" -a "$HOST_ARCH" = "x86_64" ]; then
LD=$(get_ndk_toolchain_prebuilt \
"$NDK_DIR" "$ARCH" "$HOST_OS-x86/bin/$CONFIG-ld")
fi
if [ ! -f "$LD" -a "$ARCH" = "x86" ]; then
# Special case, the x86 toolchain used to be incorrectly
# named i686-android-linux-gcc!
LD=$(get_ndk_toolchain_prebuilt \
"$NDK_DIR" "$ARCH" "$HOST_OS-x86/bin/i686-android-linux-ld")
fi
if [ -z "$LD" ]; then
panic "Cannot find Android NDK toolchain for '$ARCH' architecture. \
Please verify your NDK installation!"
fi
echo "${LD%%ld}"
}
# $1: NDK install path
get_ndk_host_gdb_client() {
local NDK_DIR="$1"
local HOST_OS HOST_ARCH
HOST_OS=$(get_ndk_host_system)
HOST_ARCH=$(get_ndk_host_arch)
echo "$NDK_DIR/prebuilt/$HOST_OS-$HOST_ARCH/bin/gdb"
}
# $1: NDK install path
# $2: target architecture.
get_ndk_gdbserver () {
local NDK_DIR="$1"
local ARCH=$2
local BINARY
# The location has moved after NDK r8
BINARY=$NDK_DIR/prebuilt/android-$ARCH/gdbserver/gdbserver
if [ ! -f "$BINARY" ]; then
BINARY=$(get_ndk_toolchain_prebuilt "$NDK_DIR" "$ARCH" gdbserver)
fi
echo "$BINARY"
}
# Check/probe the path to the Android toolchain installation. Always
# use the NDK versions of gdb and gdbserver. They must match to avoid
# issues when both binaries do not speak the same wire protocol.
#
if [ -z "$TOOLCHAIN" ]; then
ANDROID_TOOLCHAIN=$(get_ndk_toolchain_fullprefix \
"$ANDROID_NDK_ROOT" "$TARGET_ARCH")
ANDROID_TOOLCHAIN=$(dirname "$ANDROID_TOOLCHAIN")
log "Auto-config: --toolchain=$ANDROID_TOOLCHAIN"
else
# Be flexible, allow one to specify either the install path or the bin
# sub-directory in --toolchain:
#
if [ -d "$TOOLCHAIN/bin" ]; then
TOOLCHAIN=$TOOLCHAIN/bin
fi
ANDROID_TOOLCHAIN=$TOOLCHAIN
fi
# Cosmetic: Remove trailing directory separator.
ANDROID_TOOLCHAIN=${ANDROID_TOOLCHAIN%/}
# Find host GDB client binary
if [ -z "$GDB" ]; then
GDB=$(get_ndk_host_gdb_client "$ANDROID_NDK_ROOT")
if [ -z "$GDB" ]; then
panic "Can't find Android gdb client in your path, check your \
--toolchain or --gdb path."
fi
log "Host gdb client: $GDB"
fi
# Find gdbserver binary, we will later push it to /data/local/tmp
# This ensures that both gdbserver and $GDB talk the same binary protocol,
# otherwise weird problems will appear.
#
if [ -z "$GDBSERVER" ]; then
GDBSERVER=$(get_ndk_gdbserver "$ANDROID_NDK_ROOT" "$TARGET_ARCH")
if [ -z "$GDBSERVER" ]; then
panic "Can't find NDK gdbserver binary. use --gdbserver to specify \
valid one!"
fi
log "Auto-config: --gdbserver=$GDBSERVER"
fi
# A unique ID for this script's session. This needs to be the same in all
# sub-shell commands we're going to launch, so take the PID of the launcher
# process.
TMP_ID=$$
# Temporary directory, will get cleaned up on exit.
TMPDIR=/tmp/$USER-adb-gdb-tmp-$TMP_ID
mkdir -p "$TMPDIR" && rm -rf "$TMPDIR"/*
GDBSERVER_PIDFILE="$TMPDIR"/gdbserver-$TMP_ID.pid
# Return the timestamp of a given file, as number of seconds since epoch.
# $1: file path
# Out: file timestamp
get_file_timestamp () {
stat -c %Y "$1" 2>/dev/null
}
# Allow several concurrent debugging sessions
APP_DATA_DIR=$(adb_shell run-as $PACKAGE_NAME /system/bin/sh -c pwd)
fail_panic "Failed to run-as $PACKAGE_NAME, is the app debuggable?"
TARGET_GDBSERVER="$APP_DATA_DIR/gdbserver-adb-gdb-$TMP_ID"
TMP_TARGET_GDBSERVER=/data/local/tmp/gdbserver-adb-gdb-$TMP_ID
# Select correct app_process for architecture.
case $TARGET_ARCH in
arm|x86|mips) GDBEXEC=app_process32;;
arm64|x86_64) GDBEXEC=app_process64; SUFFIX_64_BIT=64;;
*) panic "Unknown app_process for architecture!";;
esac
# Default to app_process if bit-width specific process isn't found.
adb_shell ls /system/bin/$GDBEXEC > /dev/null
if [ $? != 0 ]; then
GDBEXEC=app_process
fi
# Detect AddressSanitizer setup on the device. In that case app_process is a
# script, and the real executable is app_process.real.
GDBEXEC_ASAN=app_process.real
adb_shell ls /system/bin/$GDBEXEC_ASAN > /dev/null
if [ $? == 0 ]; then
GDBEXEC=$GDBEXEC_ASAN
fi
ORG_PULL_LIBS_DIR=$PULL_LIBS_DIR
if [[ -n "$ANDROID_SERIAL" ]]; then
DEFAULT_PULL_LIBS_DIR="$DEFAULT_PULL_LIBS_DIR/$ANDROID_SERIAL-$SUFFIX_64_BIT"
fi
PULL_LIBS_DIR=${PULL_LIBS_DIR:-$DEFAULT_PULL_LIBS_DIR}
HOST_FINGERPRINT=
DEVICE_FINGERPRINT=$(adb_shell getprop ro.build.fingerprint)
[[ "$DEVICE_FINGERPRINT" ]] || panic "Failed to get the device fingerprint"
log "Device build fingerprint: $DEVICE_FINGERPRINT"
if [ ! -f "$PULL_LIBS_DIR/build.fingerprint" ]; then
log "Auto-config: --pull-libs (no cached libraries)"
PULL_LIBS=true
else
HOST_FINGERPRINT=$(< "$PULL_LIBS_DIR/build.fingerprint")
log "Host build fingerprint: $HOST_FINGERPRINT"
if [ "$HOST_FINGERPRINT" == "$DEVICE_FINGERPRINT" ]; then
log "Auto-config: --no-pull-libs (fingerprint match)"
NO_PULL_LIBS=true
else
log "Auto-config: --pull-libs (fingerprint mismatch)"
PULL_LIBS=true
fi
fi
# If requested, work for M-x gdb. The gdb indirections make it
# difficult to pass --annotate=3 to the gdb binary itself.
if [ "$ANNOTATE" ]; then
GDB_ARGS=$GDB_ARGS" --annotate=$ANNOTATE"
fi
# Get the PID from the first argument or else find the PID of the
# browser process.
if [ -z "$PID" ]; then
PROCESSNAME=$PACKAGE_NAME
if [ -z "$PID" ]; then
PID=$(adb_shell ps | \
awk '$9 == "'$PROCESSNAME'" { print $2; }' | head -1)
fi
if [ -z "$PID" ]; then
panic "Can't find application process PID."
fi
log "Found process PID: $PID"
fi
# Determine if 'adb shell' runs as root or not.
# If so, we can launch gdbserver directly, otherwise, we have to
# use run-as $PACKAGE_NAME ..., which requires the package to be debuggable.
#
if [ "$SU_PREFIX" ]; then
# Need to check that this works properly.
SU_PREFIX_TEST_LOG=$TMPDIR/su-prefix.log
adb_shell $SU_PREFIX \"echo "foo"\" > $SU_PREFIX_TEST_LOG 2>&1
if [ $? != 0 -o "$(cat $SU_PREFIX_TEST_LOG)" != "foo" ]; then
echo "ERROR: Cannot use '$SU_PREFIX' as a valid su prefix:"
echo "$ adb shell $SU_PREFIX \"echo foo\""
cat $SU_PREFIX_TEST_LOG
exit 1
fi
COMMAND_PREFIX="$SU_PREFIX \""
COMMAND_SUFFIX="\""
else
SHELL_UID=$("$ADB" shell cat /proc/self/status | \
awk '$1 == "Uid:" { print $2; }')
log "Shell UID: $SHELL_UID"
if [ "$SHELL_UID" != 0 -o -n "$NO_ROOT" ]; then
COMMAND_PREFIX="run-as $PACKAGE_NAME"
COMMAND_SUFFIX=
else
COMMAND_PREFIX=
COMMAND_SUFFIX=
fi
fi
log "Command prefix: '$COMMAND_PREFIX'"
log "Command suffix: '$COMMAND_SUFFIX'"
mkdir -p "$PULL_LIBS_DIR"
fail_panic "Can't create --libs-dir directory: $PULL_LIBS_DIR"
# Pull device's system libraries that are mapped by our process.
# Pulling all system libraries is too long, so determine which ones
# we need by looking at /proc/$PID/maps instead
if [ "$PULL_LIBS" -a -z "$NO_PULL_LIBS" ]; then
echo "Extracting system libraries into: $PULL_LIBS_DIR"
MAPPINGS=$(adb_shell $COMMAND_PREFIX cat /proc/$PID/maps $COMMAND_SUFFIX)
if [ $? != 0 ]; then
echo "ERROR: Could not list process's memory mappings."
if [ "$SU_PREFIX" ]; then
panic "Are you sure your --su-prefix is correct?"
else
panic "Use --su-prefix if the application is not debuggable."
fi
fi
# Remove the fingerprint file in case pulling one of the libs fails.
rm -f "$PULL_LIBS_DIR/build.fingerprint"
SYSTEM_LIBS=$(echo "$MAPPINGS" | \
awk '$6 ~ /\/(system|apex|vendor)\/.*\.so$/ { print $6; }' | sort -u)
for SYSLIB in /system/bin/linker$SUFFIX_64_BIT $SYSTEM_LIBS; do
echo "Pulling from device: $SYSLIB"
DST_FILE=$PULL_LIBS_DIR$SYSLIB
DST_DIR=$(dirname "$DST_FILE")
mkdir -p "$DST_DIR" && "$ADB" pull $SYSLIB "$DST_FILE" 2>/dev/null
fail_panic "Could not pull $SYSLIB from device !?"
done
echo "Writing the device fingerprint"
echo "$DEVICE_FINGERPRINT" > "$PULL_LIBS_DIR/build.fingerprint"
fi
# Pull the app_process binary from the device.
log "Pulling $GDBEXEC from device"
"$ADB" pull /system/bin/$GDBEXEC "$TMPDIR"/$GDBEXEC &>/dev/null
fail_panic "Could not retrieve $GDBEXEC from the device!"
# Find all the sub-directories of $PULL_LIBS_DIR, up to depth 4
# so we can add them to solib-search-path later.
SOLIB_DIRS=$(find $PULL_LIBS_DIR -mindepth 1 -maxdepth 4 -type d | \
grep -v "^$" | tr '\n' ':')
SOLIB_DIRS=${SOLIB_DIRS%:} # Strip trailing :
# Applications with minSdkVersion >= 24 will have their data directories
# created with rwx------ permissions, preventing adbd from forwarding to
# the gdbserver socket.
adb_shell $COMMAND_PREFIX chmod a+x $APP_DATA_DIR $COMMAND_SUFFIX
# Push gdbserver to the device
log "Pushing gdbserver $GDBSERVER to $TARGET_GDBSERVER"
"$ADB" push $GDBSERVER $TMP_TARGET_GDBSERVER >/dev/null && \
adb_shell $COMMAND_PREFIX cp $TMP_TARGET_GDBSERVER $TARGET_GDBSERVER $COMMAND_SUFFIX && \
adb_shell rm $TMP_TARGET_GDBSERVER
fail_panic "Could not copy gdbserver to the device!"
if [ -z "$PORT" ]; then
# Random port to allow multiple concurrent sessions.
PORT=$(( $RANDOM % 1000 + 5039 ))
fi
HOST_PORT=$PORT
TARGET_DOMAIN_SOCKET=$APP_DATA_DIR/gdb-socket-$HOST_PORT
# Setup network redirection
log "Setting network redirection (host:$HOST_PORT -> device:$TARGET_DOMAIN_SOCKET)"
"$ADB" forward tcp:$HOST_PORT localfilesystem:$TARGET_DOMAIN_SOCKET
fail_panic "Could not setup network redirection from \
host:localhost:$HOST_PORT to device:$TARGET_DOMAIN_SOCKET"
# Start gdbserver in the background
# Note that using run-as requires the package to be debuggable.
#
# If not, this will fail horribly. The alternative is to run the
# program as root, which requires of course root privileges.
# Maybe we should add a --root option to enable this?
#
for i in 1 2; do
log "Starting gdbserver in the background:"
GDBSERVER_LOG=$TMPDIR/gdbserver-$TMP_ID.log
log "adb shell $COMMAND_PREFIX $TARGET_GDBSERVER \
--once +$TARGET_DOMAIN_SOCKET \
--attach $PID $COMMAND_SUFFIX"
"$ADB" shell $COMMAND_PREFIX $TARGET_GDBSERVER \
--once +$TARGET_DOMAIN_SOCKET \
--attach $PID $COMMAND_SUFFIX > $GDBSERVER_LOG 2>&1 &
GDBSERVER_PID=$!
echo "$GDBSERVER_PID" > $GDBSERVER_PIDFILE
log "background job pid: $GDBSERVER_PID"
# Sleep to allow gdbserver to attach to the remote process and be
# ready to connect to.
log "Sleeping ${ATTACH_DELAY}s to ensure gdbserver is alive"
sleep "$ATTACH_DELAY"
log "Job control: $(jobs -l)"
STATE=$(jobs -l | awk '$2 == "'$GDBSERVER_PID'" { print $3; }')
if [ "$STATE" != "Running" ]; then
pid_msg=$(grep "is already traced by process" $GDBSERVER_LOG 2>/dev/null)
if [[ -n "$pid_msg" ]]; then
old_pid=${pid_msg##* }
old_pid=${old_pid//[$'\r\n']} # Trim trailing \r.
echo "Killing previous gdb server process (pid=$old_pid)"
adb_shell $COMMAND_PREFIX kill -9 $old_pid $COMMAND_SUFFIX
continue
fi
echo "ERROR: GDBServer either failed to run or attach to PID $PID!"
echo "Here is the output from gdbserver (also try --verbose for more):"
echo "===== gdbserver.log start ====="
cat $GDBSERVER_LOG
echo ="===== gdbserver.log end ======"
exit 1
fi
break
done
# Generate a file containing useful GDB initialization commands
readonly COMMANDS=$TMPDIR/gdb.init
log "Generating GDB initialization commands file: $COMMANDS"
cat > "$COMMANDS" <<EOF
set osabi GNU/Linux # Copied from ndk-gdb.py.
set print pretty 1
python
import sys
sys.path.insert(0, '$CHROMIUM_SRC/tools/gdb/')
try:
import gdb_chrome
finally:
sys.path.pop(0)
end
file $TMPDIR/$GDBEXEC
directory $CHROMIUM_OUTPUT_DIR
set solib-absolute-prefix $PULL_LIBS_DIR
set solib-search-path $SOLIB_DIRS:$PULL_LIBS_DIR:$SYMBOL_DIR
python
# Copied from ndk-gdb.py:
def target_remote_with_retry(target, timeout_seconds):
import time
end_time = time.time() + timeout_seconds
while True:
try:
gdb.execute('target remote ' + target)
return True
except gdb.error as e:
time_left = end_time - time.time()
if time_left < 0 or time_left > timeout_seconds:
print("Error: unable to connect to device.")
print(e)
return False
time.sleep(min(0.25, time_left))
print("Connecting to :$HOST_PORT...")
if target_remote_with_retry(':$HOST_PORT', 5):
print("Attached! Reading symbols (takes ~30 seconds).")
end
EOF
if [ "$GDBINIT" ]; then
cat "$GDBINIT" >> "$COMMANDS"
fi
if [ "$VERBOSE" -gt 0 ]; then
echo "### START $COMMANDS"
cat "$COMMANDS"
echo "### END $COMMANDS"
fi
if [ "$IDE" ]; then
mkdir -p "$IDE_DIR"
SYM_GDB="$IDE_DIR/gdb"
SYM_EXE="$IDE_DIR/app_process"
SYM_INIT="$IDE_DIR/gdbinit"
ln -sf "$TMPDIR/$GDBEXEC" "$SYM_EXE"
ln -sf "$COMMANDS" "$SYM_INIT"
# gdb doesn't work when symlinked, so create a wrapper.
echo
cat > $SYM_GDB <<EOF
#!/bin/sh
exec $GDB "\$@"
EOF
chmod u+x $SYM_GDB
echo "GDB server listening on: localhost:$PORT"
echo "GDB wrapper script: $SYM_GDB"
echo "App executable: $SYM_EXE"
echo "gdbinit: $SYM_INIT"
echo "Connect with vscode: https://chromium.googlesource.com/chromium/src/+/master/docs/vscode.md#Launch-Commands"
echo "Showing gdbserver logs. Press Ctrl-C to disconnect."
tail -f "$GDBSERVER_LOG"
else
log "Launching gdb client: $GDB $GDB_ARGS -x $COMMANDS"
echo "Server log: $GDBSERVER_LOG"
if [ "$CGDB" ]; then
$CGDB -d $GDB -- $GDB_ARGS -x "$COMMANDS"
else
$GDB $GDB_ARGS -x "$COMMANDS"
fi
fi